USER S MANUAL. Gateway DLMS-MODBUS for ITRON/ACTARIS SL7000 with RS232 P/N: GW-DLMS-232-SL7. Edition 2.0
|
|
- Irene Dickerson
- 5 years ago
- Views:
Transcription
1 USER S MANUAL Gateway DLMS-MODBUS for ITRON/ACTARIS SL7000 with RS232 P/N: GW-DLMS-232-SL7 Edition 2.0 MARCOM SRL Phone info@marcomweb.it Via Mezzacampagna 52 (int. 29)
2 Revision Sheet Revision Sheet Release Date Revision Description No. Rev. 0 10/05/14 User s Manual Template and Checklist Rev. 1 10/06/16 Conversion to new format Rev. 2 26/02/17 New HomeDLMS page User s Manual GW-DLMS-OPT-SL7 Page i
3 USER'S MANUAL TABLE OF CONTENTS Page # 1.0 GENERAL INFORMATION System Overview Features Connections Digital Input connection RS232 Serial port connections CONFIGURATION AND MODBUS MAP Web Visualization Gateway Settings Modbus Mapping Area COMMUNICATION ERRORS Type of error MECHANICAL FEATURES User s Manual GW-DLMS-232-SL7 Page ii
4 1.0 General Information 1.0 GENERAL INFORMATION 1.1 System Overview DLMS (Device Language Message Specification) Protocol is used in meters field and specifically in electric Energy meter to readout consumption and other values. The reference standard is EC This standard defines services which permit to read objects, OBIS defined. Inside these objects are mapped running meter values using standard profiles. By Gateway DLMS-MODBUS is possible to read DLMS energy meter s data using MODBUS RTU or MODBUS TCP protocol. The gateway is completely transparent to DLMS protocol, so user must know only Modbus protocol. This Gateway version reads data from up to two counters through the RS232 ports and provides value to RS485 port MODBUS RTU slave and on an Ethernet port Modbus TCP Server (up to 3 client connections). User s Manual GW-DLMS-232-SL7 Page 1
5 1.0 General Information 1.2 Features Connections Gateway has following communication ports: 2 x Serial RS232 port to connect up to two energy meter 1 x Serial RS485 port to read energy meter s data by master Modbus RTU 1 x Ethernet port to read Energy meter s data by client Modbus TCP 1 screw connector to supply gateway VDC (min. 2 W) Front Signal LED for communication diagnostic 2 x Digital Input (*) 2 x Digital Output (*) (*) Their status is mapped in Modbus registers Digital Input connection The schema of two digital input/output connection is: User s Manual GW-DLMS-232-SL7 Page 2
6 1.0 General Information RS232 Serial port connections The schema of serial port connection is: User s Manual GW-DLMS-232-SL7 Page 3
7 2.0 Configuration and Modbus map 2.0 CONFIGURATION AND MODBUS MAP 2.1 Web Visualization To view the web pages containing the data read from the counter you need to connect to the network using the Ethernet RJ45 port available on the gateway. By a web browser, just type the default address In case of connection failure ensure that you have on your network card address on a subnet X. This brings us to the main screen of the Gateway with the values common to all Meter User s Manual GW-DLMS-232-SL7 Page 4
8 2.0 Configuration and Modbus map From this page, through the links at the top of the page, you can browse web pages that contain the data for the single Meter or go on the configuration pages of the Gateway (Home PLC). It s possible to change baudrate of the port connected to meter from Serial port baudrate selection in case meter works with speed different from 9600 that usually is standard. You can also change the energy meter s serial number connected to the Gateway. This step is required to enable communication between Gateway and the meter. Time between readouts can be set from 10 to 3600 seconds. String debug is useful to understand the communication with meters. With GATEWAY REBOOT button you can force the gateway to reboot. The confirmation of the changes is recorded using the Submit button. 2.2 Gateway Settings To change the gateway settings, such as IP address, you need access to the configuration pages through the appropriate link (System) in the header of web pages that contain the data read from the counters. This brings us to the home screen of the device configuration and clicking on Network Setup, you can change the network settings of the device. Credentials to login and modify parameters are: Username = Admin, Password = Admin. Changes in Hardware Setup and in Network Setup are applied to the gateway after a power reboot. User s Manual GW-DLMS-232-SL7 Page 5
9 2.0 Configuration and Modbus map While going on hardware setup, you can change: - RS485 serial port communication settings; "COM0" and "COM1" ports changes don t serve, because they are forced by the program-specific settings - MODBUS node number, to communicate with the MODBUS RTU and MODBUS TCP User s Manual GW-DLMS-232-SL7 Page 6
10 2.0 Configuration and Modbus map 2.3 Modbus Mapping Area The data read from the meters are placed in the Holding Register area. A copy of the values is also present in the 4x20000 holding register area. Refresh time of the values is approximately: Time between readouts * N, where N is the number of energy meters connected to gateway and configured with a serial number different from zero in HomeDLMS. Modbus addresses in the table are base 1; depending on used Modbus master, sometimes is required to swap words to read data correctly. OBIS INDEX MODBUS ADDRESS COM0 COM1 DATA TYPE OBIS CODE NOTE - 4x40000 UINT - DI 00-4x40001 UINT - DI 01-4x40002 UINT - DO 00-4x40003 UINT - DO 01-4x x40006 UDINT - Meter's serial number - 4x40012 FLOAT - Currently reading meter index - 4x40014 FLOAT - Error number 0 4x X40216 DINT F.F Meter Error Code 1 4x x40218 DINT Time 2 4x X40220 DINT Date 3 4x X40222 DINT Address 1 4 4x X40224 DINT Address 2 5 4x X40226 FLOAT 0.1.0* Billing period counter 6 4x X40228 FLOAT Active Energy - Import - Total (kwh) 7 4x X40230 FLOAT 1.8.0* Active Energy - Import - Total (kwh) - prev. period 8 4x X40232 FLOAT Total Active Power Import Tariff 1 9 4x X40234 FLOAT 1.9.1* Total Active Power Import Tariff 1 prev. period 10 4x X40236 FLOAT Total Active Power Import Tariff x X40238 FLOAT 1.9.2* Total Active Power Import Tariff 2 prev. period 12 4x X40240 FLOAT Total Active Power Import Tariff x X40242 FLOAT 1.9.3* Total Active Power Import Tariff 3 prev. period 14 4x X40244 FLOAT 1.2.1* Max Cumul. Active Power - Import - Tariff 1 (kw) - prev. period 15 4x X40246 FLOAT 1.2.2* Max Cumul. Active Power - Import - Tariff 2 (kw) - prev. period 16 4x X40248 FLOAT 1.2.3* Max Cumul. Active Power - Import - Tariff 3 (kw) - prev. period 17 4x X40250 FLOAT Average Active Power - Import - Total (kw) 18 4x X40252 FLOAT Max Active Power - Import - Tariff 1 (kw) 19 4x X40254 FLOAT 1.6.1* Max Active Power - Import - Tariff 1 (kw) - prev. period 20 4x X40256 FLOAT Max Active Power - Import - Tariff 2 (kw) 21 4x X40258 FLOAT 1.6.2* Max Active Power - Import - Tariff 2 (kw) - prev. period 22 4x X40260 FLOAT Max Active Power - Import - Tariff 3 (kw) 23 4x X40262 FLOAT 1.6.3* Max Active Power - Import - Tariff 3 (kw) - prev. period 24 4x X40264 FLOAT Active Energy - Export - Total (kwh) 25 4x X40266 FLOAT 2.8.0* Active Energy - Export - Total (kwh) - prev. period User s Manual GW-DLMS-232-SL7 Page 7
11 2.0 Configuration and Modbus map 26 4x X40268 FLOAT Total Active Power Export Tariff x X40270 FLOAT 2.9.1* Total Active Power Export Tariff 1 prev. period 28 4x X40272 FLOAT Total Active Power Export Tariff x X40274 FLOAT 2.9.2* Total Active Power Export Tariff 2 prev. period 30 4x X40276 FLOAT Total Active Power Export Tariff x X40278 FLOAT 2.9.3* Total Active Power Export Tariff 3 prev. period 32 4x X40280 FLOAT 2.2.1* Max Cumul. Active Power - Export - Tariff 1 (kw) - prev. period 33 4x X40282 FLOAT 2.2.2* Max Cumul. Active Power - Export - Tariff 2 (kw) - prev. period 34 4x X40284 FLOAT 2.2.3* Max Cumul. Active Power - Export - Tariff 3 (kw) - prev. period 35 4x X40286 FLOAT Average Active Power Q2+Q3 36 4x X40288 FLOAT Max Active Power - Export - Tariff 1 (kw) 37 4x X40290 FLOAT 2.6.1* Max Active Power - Export - Tariff 1 (kw) - prev. period 38 4x X40292 FLOAT Max Active Power - Export - Tariff 2 (kw) 39 4x X40294 FLOAT 2.6.2* Max Active Power - Export - Tariff 2 (kw) - prev. period 40 4x X40296 FLOAT Max Active Power - Export - Tariff 3 (kw) 41 4x X40298 FLOAT 2.6.3* Max Active Power - Export - Tariff 3 (kw) - prev. period 42 4x X40300 FLOAT Reactive Energy Q1 - Total (kvarh) 43 4x X40302 FLOAT 5.8.0* Reactive Energy Q1 - Total (kvarh) - prev. period 44 4x X40304 FLOAT Total Reactive Power Q1 Tariff x X40306 FLOAT 5.9.1* Total Reactive Power Q1 Tariff 1 - prev. period 46 4x X40308 FLOAT Total Reactive Power Q1 Tariff x X40310 FLOAT 5.9.2* Total Reactive Power Q1 Tariff 2 - prev. period 48 4x X40312 FLOAT Total Reactive Power Q1 Tariff x X40314 FLOAT 5.9.3* Total Reactive Power Q1 Tariff 3 - prev. period 50 4x X40316 FLOAT Reactive Energy Q4 - Total (kvarh) 51 4x X40318 FLOAT 8.8.0* Reactive Energy Q4 - Total (kvarh) - prev. period 52 4x X40320 FLOAT Total Reactive Power Q4 Tariff x X40322 FLOAT 8.9.1* Total Reactive Power Q4 Tariff 1 - prev. period 54 4x X40324 FLOAT Total Reactive Power Q4 Tariff x X40326 FLOAT 8.9.2* Total Reactive Power Q4 Tariff 2 - prev. period 56 4x X40328 FLOAT Total Reactive Power Q4 Tariff x X40330 FLOAT 8.9.3* Total Reactive Power Q4 Tariff 3 - prev. period 58 4x X40332 FLOAT Reactive Energy Q2 - Total (kvarh) 59 4x X40334 FLOAT 6.8.0* Reactive Energy Q2 - Total (kvarh) - prev. period 60 4x X40336 FLOAT Total Reactive Power Q2 Tariff x X40338 FLOAT 6.9.1* Total Reactive Power Q2 Tariff 1 - prev. period 62 4x X40340 FLOAT Total Reactive Power Q2 Tariff x X40342 FLOAT 6.9.2* Total Reactive Power Q2 Tariff 2 - prev. period 64 4x X40344 FLOAT Total Reactive Power Q2 Tariff x X40346 FLOAT 6.9.3* Total Reactive Power Q2 Tariff 3 - prev. period 66 4x X40348 FLOAT Reactive Energy Q3 - Total (kvarh) 67 4x X40350 FLOAT 7.8.0* Reactive Energy Q3 - Total (kvarh) - prev. period 68 4x X40352 FLOAT Total Reactive Power Q3 Tariff x X40354 FLOAT 7.9.1* Total Reactive Power Q3 Tariff 1 - prev. period 70 4x X40356 FLOAT Total Reactive Power Q3 Tariff x X40358 FLOAT 7.9.2* Total Reactive Power Q3 Tariff 2 - prev. period 72 4x X40360 FLOAT Total Reactive Power Q3 Tariff x X40362 FLOAT 7.9.3* Total Reactive Power Q3 Tariff 3 - prev. period User s Manual GW-DLMS-232-SL7 Page 8
12 2.0 Configuration and Modbus map 74 4x X40364 FLOAT Reading factor for energy 75 4x X40366 FLOAT Overall transformer ratio (numerator) 76 4x X40368 FLOAT Transformer ratio - current (numerator) 77 4x X40370 FLOAT Transformer ratio - current (denominator) Some systems have problem with float number, so we have created a copy of total energy counter in UNSIGNED LONG format in the following different MODBUS area: COM0 COM1 0 4x x41086 UDINT Active Energy - Import - Total (kwh) 1 4x x41088 UDINT 1.8.0* Active Energy - Import - Total (kwh) - prev. period 2 4x x41090 UDINT Active Energy - Export - Total (kwh) 3 4x x41092 UDINT 2.8.0* Active Energy - Export - Total (kwh) - prev. period 4 4x x41094 UDINT Reactive Energy Q1 - Total (kvarh) 5 4x x41096 UDINT 5.8.0* Reactive Energy Q1 - Total (kvarh) - prev. period 6 4x x41098 UDINT Reactive Energy Q4 - Total (kvarh) 7 4x x41100 UDINT 8.8.0* Reactive Energy Q4 - Total (kvarh) - prev. period 8 4x x41102 UDINT Reactive Energy Q2 - Total (kvarh) 9 4x x41104 UDINT 6.8.0* Reactive Energy Q2 - Total (kvarh) - prev. period 10 4x x41106 UDINT Reactive Energy Q3 - Total (kvarh) 11 4x x41108 UDINT 7.8.0* Reactive Energy Q3 - Total (kvarh) - prev. period User s Manual GW-DLMS-232-SL7 Page 9
13 3.0 Communication errros 3.0 COMMUNICATION ERRORS 3.1 Type of error Errors in modbus address 4x40014 are formed by 2 digits: AB. A : this indicates which energy meter is reported B : this indicates the type of error 5 : serial port is not correctly opened 6 : communication timeout error 1 : energy meter doesn t answer to gateway -> please check cable connection and if energy meter s serial number is correct and written in the right modbus address 2 : error in extracting ID code from meter s message -> please check cable connection 7 : message from energy meter is too big for gateway s buffer; this error does not compromise gateway s normal functionality, but last part of obis list will be lost 8 : message from energy meter is empty -> please check cable connection There are also : 888 : global timeout error (this happens if there aren t meter s serial number in modbus area) 999 : hardware/software authenticity error User s Manual GW-DLMS-232-SL7 Page 10
14 7.0 Mechanical features 4.0 MECHANICAL FEATURES The size of the gateway are the following: User s Manual GW-DLMS-232-SL7 Page 11
LANDIS & GYR E650 with RS485 DLMS-MODDBUS Gateway
Energy Meter LANDIS & GYR E650 with RS485 DLMS-MODDBUS Gateway RS485 DLMS-MODBUS Gateway DLMS (Device Language Message Specification) Protocol is used in meters field and specifically in electric Energy
More informationEthernet Interface Module
Interface Manual 1 Ethernet Interface Module SignalFire Number: ENET-DIN The SignalFire Ethernet Gateway has the following features: - Wide range DC power input. 6 to 36VDC - Power Over Ethernet (POE)
More informationGNM3D Series COMMUNICATION PROTOCOL. Version 1 Revision 0
GNM3D Series COMMUNICATION PROTOCOL Version 1 Revision 0 Index 1.1 1.2 Introduction... 3 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read Input Registers)...
More informationEM24-DIN COMMUNICATION PROTOCOL. Version 3 Revision 1
EM24-DIN COMMUNICATION PROTOCOL Version 3 Revision 1 July 15 th, 2008 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function 04h (Read Input
More informationEM210 COMMUNICATION PROTOCOL. Version 3 Revision 3
EM210 COMMUNICATION PROTOCOL Version 3 Revision 3 November 13 th, 2015 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 Function 03h (Read Holding Registers)... 3 Function 04h (Read Input Registers)...
More informationEM210 COMMUNICATION PROTOCOL. Version 3 Revision 1
EM210 COMMUNICATION PROTOCOL Version 3 Revision 1 June 4 th, 2014 Index 1.1 Introduction...3 1.2 MODBUS functions...3 Function 03h (Read Holding Registers)...3 Function 04h (Read Input Registers)...4 Function
More informationEM24_E1. (Ethernet) COMMUNICATION PROTOCOL. Version 0 Revision 1.2
EM24_E1 (Ethernet) COMMUNICATION PROTOCOL Version 0 Revision 1.2 Index 1 INTRODUCTION... 3 1.1 1.2 Introduction... 3 Modbus functions... 3 1.2.1 Function 03h (Read Holding Registers) and 04h (Read Input
More informationEM24-DIN PFA, PFB & X models
EM24-DIN PFA, PFB & X models COMMUNICATION PROTOCOL Version 4 Revision 0 December 03 th, 2012 Index 1.1 Introduction...3 1.2 MODBUS functions...3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function
More informationCAS IKS Gateway (Modbus RTU/TCP and HTML) Manual
CAS-2700-42 IKS to Modbus RTU Gateway CAS 2700-42 IKS Gateway (Modbus RTU/TCP and HTML) Manual CAS 2700-42 IKS Gateway Manual Page 1 of 34 BLANK PAGE CAS 2700-42 IKS Gateway Manual Page 2 of 34 Contents
More informationEM300 Series. ET300 Series
EM300 Series and ET300 Series COMMUNICATION PROTOCOL Version 2 Revision 11 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read
More informationEM23-DIN COMMUNICATION PROTOCOL. Version 0 Revision 0
EM23-DIN COMMUNICATION PROTOCOL Version 0 Revision 0 January 14 th, 2013 Index 1.1 Introduction...3 1.2 MODBUS functions...3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function 04h (Read Input
More informationEM100 Series and ET100 Series
EM100 Series and ET100 Series COMMUNICATION PROTOCOL Version 2 Revision 6 Index 1.1 1.2 Introduction... 3 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function 04h (Read
More informationEM21 COMMUNICATION PROTOCOL. Version 1 Revision 0
EM21 COMMUNICATION PROTOCOL Version 1 Revision 0 April 7 th, 2008 Index 1.1 Introduction...3 1.2 MODBUS functions...3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function 04h (Read Input Registers)...4
More informationDocument Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter
Document Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter Login for the first time, please use http://192.168.1.100 To key in user name and password is for identifying authorization. Default
More informationEM271 COMMUNICATION PROTOCOL. Version 0 Revision 0
EM271 COMMUNICATION PROTOCOL Version 0 Revision 0 May 12 th, 2014 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read Input Registers)...
More informationUSER MANUAL Z-KEY MODBUS ETHERNET SERIAL GATEWAY AND SERIAL DEVICE SERVER. Via Austria, PADOVA ITALY
USER MANUAL Z-KEY MODBUS ETHERNET SERIAL GATEWAY AND SERIAL DEVICE SERVER SENECA s.r.l. Via Austria, 26 35127 PADOVA ITALY Tel. +39.049.8705355 8705359 Fax. +39.049.8706287 Web site: www.seneca.it Technical
More informationVersion 1.0c May 6, 2010 ATK3
Version 1.0c May 6, 2010 ATK3 Contents 1 Hardware 2 1.1 Inputs............................... 2 1.2 Outputs.............................. 3 1.3 RS485............................... 3 1.4 Ethernet..............................
More informationMotortronics VirtualSCADA VS2-MT Communication Gateway VS2-MT User Manual Revision
Motortronics VirtualSCADA VS2-MT Communication Gateway VS2-MT User Manual Revision 1.03.00 Motortronics / Phasetronics 1600 Sunshine Drive Clearwater, Florida 33765 Tel: 727-573-1819 Fax: 727-573-1803
More informationEM270 COMMUNICATION PROTOCOL. Version 1 Revision 0
EM270 COMMUNICATION PROTOCOL Version 1 Revision 0 October 4 th, 2013 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read Input
More informationDEFAULT IP ADDRESS
REAL TIME AUTOMATION 2825 N. Mayfair Rd. Suite 111 Wauwatosa, WI 53222 (414) 453-5100 www.rtaautomation.com EtherNet/IP - DeviceNet Master Gateway MODBUS TCP - DeviceNet Master Gateway Copyright 2007 Real
More informationAny device, including routers and hosts, is running an implementation of IP address Host
INSTRUCTION MANUAL IM471-U v0.1 EMI-10L Introduction EMI-10L converter lets you convert a serial RS485 communications port on a bus Ethernet with TCP / IP. The concepts and terms commonly used in the TCP
More informationEM24-DIN COMMUNICATION PROTOCOL. Version 3 Revision 0
EM24-DIN COMMUNICATION PROTOCOL Version 3 Revision 0 March 25 th, 2008 Index 1.1 Introduction...3 1.2 MODBUS functions...3 1.2.1 Function 03h (Read Holding Registers)...3 1.2.2 Function 04h (Read Input
More informationEM26-96 COMMUNICATION PROTOCOL. Version 1 Revision 0
EM26-96 COMMUNICATION PROTOCOL Version 1 Revision 0 February 5 th, 2007 Index 1.1 Introduction...3 1.2 MODBUS functions...3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read Input
More informationConfiguring RAD-900-IFS with GW MODBUS TCP/RTU for Modbus TCP Communication
Configuring RAD-900-IFS with GW MODBUS TCP/RTU for Modbus TCP Communication Published: 2018-10-22 Contents Introduction... 1 Objectives:... 1 Requirements:... 2 Procedure... 3 Configuring the RAD-900-IFS
More informationfor Energy and Power meters AEM and APM with Modbus interface
DESIGNER S REFERENCE HANDBOOK for Energy and Power meters AEM and APM with Modbus interface Technical reference DEIF A/S Page 1 of 31 Document no.: 4189320051A Table of contents 1. ABOUT THIS DOCUMENT...
More informationEKI-6332 & EKI-136x- MB_setup example SOP. Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.
EKI-6332 & EKI-136x- MB_setup example SOP Revision Date Revision Description Author April/2018 V1.0 Initial release ICG AE Jacky.Lin 1 Abstract This SOP explains how to configure the EKI-6332 & EKI-136x-MB
More informationAcuvim II Series Power Meter SNMP Protocol User's Manual
Acuvim II Series Power Meter SNMP Protocol User's Manual Copyright 2018 V2.00 This manual may not be altered or reproduced in whole or in part by any means without the expressed written consent of Accuenergy.
More informationbased on a previously created custom model an entirely new model
Chapter 11: Custom Library Com'X 510 User Manual Custom Models The Com'X 510 supports the use of custom models. A custom model is any model other than a Built-in model from Schneider Electric. To use a
More informationABLELink. Modbus Gateway MB5000 Series User s Manual
ABLELink MB5000 Series User s Manual Version 1.1 Updated in March, 2010 TEL: 886-3-5508137 FAX: 886-3-5508131 http://www.atop.com.tw Table of Contents Table of Contents... 2 Introduction... 4 Features...
More informationHART / EtherNet/IP Gateway GT200-HT-EI User Manual V 1.0 REV A SST Automation
HART / EtherNet/IP Gateway GT200-HT-EI V 1.0 REV A SST Automation E-mail: SUPPORT@SSTCOMM.COM WWW.SSTCOMM.COM Catalog 1 Product Overview... 4 1.1 Product Function...4 1.2 Product Features... 4 1.3 Technical
More informationDocument Number: Rev. B
User Guide Trademark Notices Microsoft and Windows are registered trademarks of Microsoft Corporation. Other product names mentioned herein may be trademarks and/or registered trademarks of their respective
More informationDNP3 Communications Protocol
Powermeter and Power Quality Analyzer PM174 DNP3 Communications Protocol Reference Guide BG0413 Rev. A3 Every effort has been made to ensure that the material herein is complete and accurate. However,
More informationPMAC3624 User Manual V2.0. Embedded power monitoring system server
PMAC3624 User Manual V2.0 Embedded power monitoring system server PILOT (HENGQIN) CO., LTD CONTENTS 1 Summary...3 2 Appearance & Installation...4 2.1 Dimension & Installation...4 2.2 Interface & Terminal...
More informationEGW1-IA3-MB User s Manual
www.exemys.com Rev. 0 1 Products are in constant evolution to satisfy our customer needs. For that reason, the specifications and capabilities are subject to change without prior notice. Updated information
More informationModbus Server - M-Bus (EN ) Gateway for the integration of M-BUS meters with Modbus RTU and TCP based control systems.
IntesisBox Server - M-Bus (EN 13757-3) Gateway for the integration of M-BUS meters with and based control systems. Integrate M-Bus meters into your master device or system (BMS, SCADA, PLC, HMI, TouchPanels
More informationCOMMUNICATION MODBUS PROTOCOL
COMMUNICATION MODBUS PROTOCOL CE4DMID31 / CE4DMID21 CONTO D4 Pd MID PR123 20/10/2016 Pag. 1/9 Contents 1.0 ABSTRACT... 2 2.0 DATA MESSAGE DESCRIPTION... 3 2.1 Parameters description... 3 2.2 Data format...
More informationBFR3000 Modbus Router
BFR3000 Modbus Router Product User Guide Software Build Date: December 17 th 2015 Version 3 Platform: N34 Real Time Automation, Inc. 1 1-800-249-1612 Trademarks All other trademarks and registered trademarks
More informationCAS & CAS UL. Modbus RTU Data Client. (Hardware and Software Solutions) Manual
CAS-2500-01 & CAS-2500-01-UL ModbusRTU Data Client (Hard and Soft Solutions) CAS 2500-01 & CAS 2500-01-UL Modbus RTU Data Client (Hardware and Software Solutions) Manual Email: dfs@chipkin.com Website:
More informationisma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw
isma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw www.gc5.pl Table of content 1 Introduction... 4 1.1 Revision history... 5 1.2 Safety rules... 5 1.3 Technical specifications... 6 1.4
More informationMW100 Setting for Data Communications via Modbus Protocol. Connect to Ethernet. Enter Ethernet settings. Enter Server Settings
User s Manual Setting for Data Communications via Modbus Protocol Overview This is an explanation of the procedure for entering settings for Modbus communications with the DAQMASTER. This manual descries
More informationMID PRELIMINARY DATA SHEET. RI-D Series. Single Phase Multifunction Energy Meter (MID Certified) MID
PRELIMINARY DATA SHEET RI-D35-100 Series Single Phase Multifunction Energy Meter (MID Certified) MID direct connected Two pulse outputs LED pulse indication High definition LCD display with white backlight
More informationPMAC770 LAN Module User Manual V1.0
PMAC770 LAN Module User Manual V1.0 1 CONTENTS 1. Product Description... 3 1.1 WEB page data... 3 1.2 Functions... 3 1.3 Performance Specifications... 3 2. Installation and Wiring... 4 2.1 Environment...
More informationEmbedded Modbus TCP Module GS11-MT. User Manual REV 1.1. SST Automation.
Embedded Modbus TCP Module GS11-MT User Manual REV 1.1 SST Automation E-mail: SUPPORT@SSTCOMM.COM WWW.SSTCOMM.COM Catalog 1 About the Embedded Module... 4 1.1 General...4 1.2 Features... 4 1.3 Specifications...4
More informationtsh-700 Series User Manual
tsh-700 Series User Manual Tiny Serial Port Sharer Aug. 2017 Ver. 1.6 WARRANTY All products manufactured by ICP DAS are warranted against defective materials for a period of one year from the date of delivery
More information3COM 3C886A-US 56K LAN Modem
3COM 3C886A-US 56K LAN Modem The following is a guideline for remote connectivity to an Ethernet network via a phone line. It uses a 3COM LAN Modem (p/n 3C886a) as a modem, gateway, router and hub. It
More informationHART/ Modbus TCP Gateway GT200-HT-MT User Manual V 1.2 REV A SST Automation
HART/ Modbus TCP Gateway GT200-HT-MT User Manual V 1.2 REV A SST Automation E-mail: SUPPORT@SSTCOMM.COM WWW.SSTCOMM.COM Catalog 1 Product Overview... 4 1.1 Product Function...4 1.2 Product Features...
More informationGE-DSH-73/82 and 82-POE Managed Switch Installation Sheet
GE Security GE-DSH-73/82 and 82-POE Managed Switch Installation Sheet Package Contents Thank you for purchasing the GE Security 7/8-Port Fast Ethernet + 2/3-Port Gigabit TP/SFP Combo Managed Switch. The
More informationNCOM SERIAL DEVICE SERVER 4XX SERIES USER S MANUAL
NCOM SERIAL DEVICE SERVER 4XX SERIES USER S MANUAL 2017-07-07 Edition Titan Electronics Inc. Web: www.titan.tw Contents 1. INTRODUCTION... 4 1.1 Key Features... 5 1.2 Specifications... 6 2. PANEL LAYOUT
More informationGW1000 User s Guide. Revision 1.04 Mar 30, 2008
GW1000 User s Guide Revision 1.04 Mar 30, 2008 Website: www.datalink-networks.com Tel : (604) 632-4278 / (866) 709-6390 Table of Contents 1.0 GW1000 General Operation & Applications... 3 2.0 Hardware Specifications...
More informationAccessing the AXM-WEB at Admin level
Accessing the AXM-WEB at Admin level This document will provide a brief overview of accessing the AXM-WEB at Admin level. In this level users will be able to read and view meter information as well as
More informationGW-7472 / GW EtherNet/IP to Modbus RTU/TCP Gateway User Manual
GW-7472 / GW-7473 EtherNet/IP to Modbus RTU/TCP Gateway User Manual Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, starting from
More informationIndustrial Serial Device Server
1. Quick Start Guide This quick start guide describes how to install and use the Industrial Serial Device Server. Capable of operating at temperature extremes of -10 C to +60 C, this is the Serial Device
More informationMODBUS APPLICATION MANUAL DFC-0124
MODBUS APPLICATION MANUAL DFC-0124-1 - COPYRIGHT NOTICE Any unauthorized use or copying of the contents or any part of this document is prohibited. This applies in particular to trademarks, model denominations,
More informationRGM180 Display Series
Quick Start Guide RGM180 Display Series BG0509 REV.A2 RGM180 QUICKSTART LIMITED WARRANTY The manufacturer offers the customer a 24-month functional warranty on the instrument for faulty workmanship or
More informationCOMMUNICATION MODBUS PROTOCOL
COMMUNICATION MODBUS PROTOCOL CE4DT36 CONTO D4 Pd (3-single phase) PR134 20/10/2016 Pag. 1/11 Contents 1.0 ABSTRACT... 2 2.0 DATA MESSAGE DESCRIPTION... 3 2.1 Parameters description... 3 2.2 Data format...
More information48-Port 10/100/1000Base-T with 4 Shared SFP. Managed Gigabit Switch WGSW Quick Installation Guide
48-Port 10/100/1000Base-T with 4 Shared SFP Managed Gigabit Switch WGSW-48000 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to
More informationNetBiter Serial Server User Manual
User Manual IntelliCom Innovation AB Linjegatan 3D SE-302 50 Halmstad SWEDEN Phone +46 35 18 21 70 Fax +46 35 17 29 09 email info@intellicom.se web www.intellicom.se Revision List Revision Date Author
More informationUser Manual Anybus Modbus TCP/RTU Gateway
User Manual AB7702 Rev. 2.01 Connecting Devices TM HMS Industrial Networks Mailing address: Box 4126, 300 04 Halmstad, Sweden Visiting address: Stationsgatan 37, Halmstad, Sweden E-mail: info@hms-networks.com
More informationIntesisBox Modbus Server Fidelio IP
IntesisBox Modbus Server Fidelio IP User Manual r1 eng Issue Date: 10/04/2014 Intesis Software S.L. All Rights Reserved. Information in this document is subject to change without notice. The software described
More information8380 RPC Return Path Combiner. User s Guide
8380 RPC Return Path Combiner User s Guide Notice Every effort was made to ensure that the information in this manual was accurate at the time of printing. However, information is subject to change without
More informationPowerLogic ION6200 Serial Communications Protocol and ION / Modbus Register Map
70022-05-XX PROTOCOL DOCUMENT 04/2007 PowerLogic ION6200 Serial Communications Protocol and ION / Modbus Register Map This document explains the Modbus protocol on the ION6200 meter. The ION6200 meter
More informationNetbiter EC300 Series
Netbiter EC300 Series USER MANUAL SCM-1202-012 2.2 ENGLISH Important User Information Liability Every care has been taken in the preparation of this document. Please inform HMS Industrial Networks AB of
More informationOverview. Table of contents
1 Table of contents Overview... 1 Applications... 2 Connecting and adjusting of converter... 3 Communication parameters adjusting... 5 RealPort - virtual serial port... 12 Installing virtual serial port
More informationThingsPro Software User s Manual
ThingsPro Software User s Manual Edition 1.0, February 2016 www.moxa.com/product 2016 Moxa Inc. All rights reserved. ThingsPro Software User s Manual The software described in this manual is furnished
More informationNCOM SERIAL DEVICE SERVER 1XX SERIES USER S MANUAL
NCOM SERIAL DEVICE SERVER 1XX SERIES USER S MANUAL 2017-07-07 Edition Titan Electronics Inc. Web: www.titan.tw Contents 1. INTRODUCTION... 4 1.1 Key Features... 5 1.2 Specifications... 6 2. PANEL LAYOUT
More informationP-Bus Gateway Firmware
P-Bus Gateway Firmware PBGW2.128 Version 1.40 Easy configuration with web interface (HTML) P-busses configurable separately in master or slave mode Status display of each P-bus Fixed IP address or dynamic
More informationSmart Energy Meter. Benefits and Main Features. User Manual Revision English OB (100)A
User Manual Revision 2.001 English Smart Energy Meter OB737 0.5-10(100)A Benefits and Main Features Three phase metering Standard DIN rail Format (DIN43880) EN50470-3 Class B. IEC62053-21 Import & Export
More informationFAQ collection for PAC3100/3200/4200
PAC3100/3200/4200 FAQ collection for PAC3100/3200/4200 Cluster-FAQ Edition (2012 6 ) PAC PAC 7KM Key Words PAC 7KM Multifunction power meters I CS LS TS Page 2-22 PAC3100/PAC3200/PAC4200... 5 Q1: PAC3200...5
More information(B) Execute SMS TCP MODBUS Interface Application
Security Management System software generates notifications which indicate the state of various health parameters eg disk failure, one or more cameras offline etc. These notifications can be exposed as
More informationMODBUS APPLICATION MANUAL DKM-411
MODBUS APPLICATION MANUAL DKM-411-1 - COPYRIGHT NOTICE Any unauthorized use or copying of the contents or any part of this document is prohibited. This applies in particular to trademarks, model denominations,
More informationIntesisBox MAPS. Configuration & monitoring software of IntesisBox KNX series. User's manual Issue Date: 06/17 r1.0 eng
IntesisBox MAPS Configuration & monitoring software of IntesisBox KNX series User's manual Issue Date: 06/17 r1.0 eng Intesis Software S.L.U. 2017 All Rights Reserved. Information in this document is subject
More informationEthernet HMi RAC and Gateway Setup Instructions Rev. 09
Ethernet HMi RAC and Gateway Setup Instructions Rev. 09 Table of Contents Preparing a PXG-900 Gateway...2 Preparing an ELC-CAENET Module... 7 Configuring the HMi RAC... 10 Preparing the ATC-300+... 13
More informationIPM-01 / IPM-01H MODBUS TCP/RTU Bridge User Guide
VxI Power Ltd. IPM-01 / IPM-01H MODBUS TCP/RTU Bridge User Guide 01/12/2015 Document Number: 14970-020A Issue Number: 2 Contents 1.0 Device Overview... 2 2.0 Getting Started... 3 2.1 Connecting the Device...
More informationQUCM Meter Polling With SNMP Support
QUCM Meter Polling Application Manual QUCM Meter Polling With SNMP Support Installation and Programming Manual This Manual describes the QUCM application for polling networked POWERLOGIC meters and displaying
More informationTH800DS CONTROLLER MANUAL
TH800DS CONTROLLER MANUAL 1 Introduction 3 1.1 Overview 3 1.2 Features 4 1.3 Specifications 4 1.4 Panel 5 1.4.1 Front Panel 5 1.4.2 Rear Panel 6 2 Hardware Installation 7 3 Accessing the Device 8 3.1 Before
More informationGV-I/O Box 4E. Contents
GV-I/O Box 4E Contents 1.1 Key Features... 2 1.2 System Requirements... 2 1.3 Packing List... 2 1.4 Overview... 3 1.5 Connecting to PC... 4 1.5.1 RS-485 Wiring... 4 1.6 Assigning Device ID to GV-I/O Box
More informationCONTO IMP PROTOCOL COMMUNICATION CONTENTS 1.0 INTRODUCTION
7/02/12 Pagina 1 di 14 PULSE MANAGER FIRMWARE 1.01 CONTO IMP PROTOCOL COMMUNICATION CONTENTS 1.0 INTRODUCTION 2.0 DATA MESSAGE DESCRIPTION 2.1 Data field description 2.2 Data format 2.3 Description of
More informationEM300 Series. ET300 Series
EM300 Series and ET300 Series COMMUNICATION PROTOCOL Version 2 Revision 9 Index 1.1 Introduction... 3 1.2 MODBUS functions... 3 1.2.1 Function 03h (Read Holding Registers)... 3 1.2.2 Function 04h (Read
More informationNordField Electronics
NordField Electronics XS1000 TCP/IP to RS232/422/485 Device Server Overview and quick info sheet 3.0. Hardware Installation & Initial Setup 3.1 RS-232 Configuration:(DB9 Male) (DB9Male) Signal I/O PIN2
More informationETOR-4. Ethernet/Serial Gateway USER MANUAL
ETOR-4 Ethernet/Serial Gateway USER MANUAL 1 TABLE OF CONTENTS SECTION 1 GENERAL INFORMATION...6 SECTION 2 INSTALLATION...9 2.1 Definitions on ETOR... 9 2.2 Configuring ETOR...10 2.3 Required Installations
More informationControls Division. Mounting. Mounting Terminal connections main circuit. Terminal connections control circuit. Insulation characteristics
Data sheet Energy meter with integrated Serial Modbus interface Controls Division ALD1 Energy meters with an integrated Serial RS485 Modbus interface allow direct reading of all relevant data, such as
More informationrbox610 Series Robust Din-rail Fanless Embedded System Web Configuration and App Software User s Manual
rbox610 Series Robust Din-rail Fanless Embedded System Web Configuration and App Software User s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information.
More informationGEM80 & ewon Setup Quick Guide
Introduction to the ewon The ewon is an intelligent, programmable Ethernet Gateway, which can be used to bridge GEM 80 PLCs onto an Ethernet network, via the PLC serial port (Port3). This provides network-based
More informationThingsPro Software User s Manual
Edition 2.0, April 2016 www.moxa.com/product 2016 Moxa Inc. All rights reserved. The software described in this manual is furnished under a license agreement and may be used only in accordance with the
More informationICx Gateway: Sample Implementation
Solutions for SCADA communications and protocol translation ICx Gateway By RBH Solutions Private Limited SCO 20, Walia Enclave Patiala (INDIA) 147002 info@rbhsolutions.com ICx Series Gateway is flexible
More informationDistributed Control I/O System ADAM-8000 Series
Distributed Control I/O System Series 16 Series Distributed Control I/O 16-2 Series Total Fieldbus Solution 16-4 CPU s ADAM8214-1BA01 PLC CPU214 16-6 ADAM8214-2BM01 PLC CPU214 with Profibus-DP Master 16-6
More informationFSa0626 Project Notes
FSa0626 Project Notes How to test the data 1. From the main menu of ruinet select A for Data Arrays Array Name Array Type Set to zero each time any data in the array is updated. Index Number To look at
More informationUser Guide for RTP 3280 Ethernet Interface
Description: User Guide for RTP 3280 Ethernet Interface RTP 3280 Thermal Receipt Printer comes with three different I/O interfaces in I/O board replaceable version. And one of the three I/O interface board
More informationElectrical Energy Meter with integrated Serial Modbus interface
Electrical Energy Meter with integrated Serial Modbus interface EEM230-D-MO Electrical energy meter with an integrated serial RS485 Modbus interface allow direct reading of all relevant data, such as energy
More informationEM111-EM112 M-BUS COMMUNICATION PROTOCOL. Revision 4.0
EM111-EM112 M-BUS COMMUNICATION PROTOCOL Revision 4.0 Index 1.1 Introduction...3 1.2 M-BUS functions...3 1.2.1 Single control character procedure SND_NKE...3 1.2.2 Request/Respond Procedure (REQ/RSP)...4
More informationPlease refer to application note AN00129 for further details on HCP2 configuration in ABB motion control products.
Motion Control Products Application note Using CP600 as a communication gateway AN00237-001 Make use of the configurability and ease of use of the CP600 HMI range to automatically pass data from one connected
More information48-Port 10/100Mbps + 4 Gigabit TP / 2 SFP. Managed Switch WGSW Quick Installation Guide
48-Port 10/100Mbps + 4 Gigabit TP / 2 SFP Managed Switch WGSW-5242 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to the Console...
More informationIntroduction Overview Preparation Configuration Confirmation...29
Technical Information YFGW410 Field Wireless Management Staion Startup Guide (From Device Configuration and Wireless Network Connection to Process Data Monitoring) Contents Introduction...2 1. Overview...3
More informationOperating guide. OPC server for ECL Comfort 310. Table of Contents
Operating guide OPC server for ECL Comfort 310 Table of Contents 1. Introduction to Danfoss ECL OPC Server... 2 2. Configuring databases... 6 3. Exporting configuration data... 7 4. Importing data from
More informationManagement Security Switch SGSD-1022 / SGSD-1022P SGSW-2840 / SGSW-2840P. Quick Installation Guide
Management Security Switch SGSD-1022 / SGSD-1022P SGSW-2840 / SGSW-2840P Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to the Console...
More informationWebNMS IoT Cloud Gate Deployment Guide
Table of Contents Introduction... 3 IoT Structure... 3 Cloudgate Gateway Device... 7 System Requirements... 7 Prepare the CloudGate Device... 11 Compatible Sensors... 23 Analog sensors... 23 Digital Input
More informationModicon Modbus Driver
Modicon Modbus Driver Filename Modbus.dll Manufacturer Modicon Devices Protocol Version 3.1.36 Any device compatible with Modbus protocol v1.1b Modbus v1.1b Last Update 03/17/2017 Platform Win32 and Windows
More informationIndustrial-Automation System HIMatrix. MODBUS Master/Slave. Manual
Industrial-Automation System HIMatrix MODBUS Master/Slave Manual HIMA Paul Hildebrandt GmbH + Co KG Rev. 0.02 Industrial Automation HI 800 003 HEA Important Notes All HIMA products mentioned in this manual
More informationRAD XD and RAD XD-WM a/b/g Transceiver with Serial Link Quick Start Guide
RAD-80211-XD and RAD-80211-XD-WM 802.11a/b/g Transceiver with Serial Link Quick Start Guide 1 This Quick Start Guide is intended to provide adequate information necessary to get a functional system operating.
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More information