TOUCH TRACKER with Quad Splitter
|
|
- Primrose Terry
- 5 years ago
- Views:
Transcription
1 1 TOUCH TRACKER with Quad Splitter PARTS REQUIRED AD TOUCH TRACKER 16 AD TOUCH TRACKER 16 Installation Kit: Part Number: Description Qty. Part No. Modular cable assy 4.3m Screw, M2.9x Anchor, 4-8x Screw, #8x Conn, 1x5pos Lug, 22-16AWG Cable, 3-cond, 18AWG 5m Interconnect box Quad Splitter cable assy Hood, D-Sub, 9pos, cable Conn, D-Sub, plug, hsg, 9pos Serial cable, DB9M-DB9F !! WARNING Shock Hazard! Disconnect AC Power to the Switch. CAUTION static sensitive components! Follow proper handling procedures to prevent component failure. Installation Procedures 1. Identify the type of quad splitter being installed. If the quad splitter has an RJ-45 connector labeled RS232, you must build the cable. Refer to the wiring diagram on page 2. If the quad splitter has a DB9 connector labeled remote, use the DB9M-DB9F serial cable (PN ) provided in this kit. 2. Terminate the external interconnect module (EIM) at the end of the SensorNet network. See the diagram on page 2 or 3. For more information on the SensorNet network, refer to the SensorNet Network Guide (PN ). 3. Mount each EIM on a wall or other surface within 3m (10') of the TOUCH TRACKER controller. 4. Connect the power transformer and SensorNet cable to on each EIM. 5. Connect the data cable from on the main TOUCH TRACKER EIM to the correct port at the rear panel of the quad splitter. If you are using the cable with the RJ-45 connector, refer to the diagram on page 2. If you are using the DB9M- DB9F serial cable, refer to the diagram on page Connect the modular cable from on EIM to the TOUCH TRACKER controller. 7. Connect the SensorNet cable from the dome to the terminated EIM. 8. Plug each power transformer into a grounded, 3 wire receptacle. NOTE: If the TOUCH TRACKER keypad and backlighting do not illuminate when power is applied, unplug each power transformer and repeat steps 3 through From the TOUCH TRACKER controller, press Menu to configure the software for the quad splitter. 10. Using the Ball, page down the screen to the!"#$%&'()*%+), menu option. 11. Press the zoom/focus button to select the!"#$%& ()*%+), menu option. 12. Press Next to the select the appropriate quad splitter for this installation. See the example screen below. Device = Quad = POSEM Note: If you are connected using the DB9M-DB9F serial cable, you must select the following device: Device = Mux 4 = POSEM 13. Press Menu to select the device configuration and return to the Camera Control mode. 14. To configure the TOUCH TRACKER controller as a primary or secondary unit, page down the screen to the -"&'./%01/234#5 menu option. 15. Press the zoom/focus button to select the -"&./%01/234#5 menu option. 16. Press Next to toggle between using the TOUCH TRACKER controller as the primary (Main) unit for the SensorNet polling and alarm monitoring or as the secondary (Call) unit with limited user functionality. 17. Press Menu to reset the TOUCH TRACKER controller as a primary or secondary unit. The controller will reboot to the Camera Control Mode , Rev. B
2 AD TOUCH TRACKER 16 QUAD SPLITTER WITH J-Box J-Box - J-Box #1 J-Box #2 Orange 1 Host A Yellow 2 Host B Orange 3 Auxiliary A Yellow 4 Auxiliary B White 2 28 Vac Red 3 Black 4 28 Vac Yellow 5 SensorNet B EIM Transformers UNTERMINATED NOTE: AD TOUCH TRACKER 16 supports up to 2 controllers. Terminate on the EIM that is on an end point of the SensorNet network. DB9 (M) Color Quad DB9 (M) Green 1 NO CONN Red 2 TRANSMIT Orange 3 GROUND Monochrome Quad DB9 (M) EIM # EIM #2 1-2 TERMINATED 2-3 UNTERMINATED TERMINATED 5 4 Main Yellow 2 SensorNet B Black 3 Red 4 White 5 Wiring NOTE: The maximum combined SensorNet cable length is 19m (4000'). Call Green 2 TRANSMIT Red 1 NO CONN Orange 3 GROUND Wiring COLOR PIN Green QUAD SPLITTER Red 4 Orange 2 VCR VCR MONITOR IN OUT ALARMS RS EXPAND CALL QUAD 120V 60Hz Rev. B 2
3 AD TOUCH TRACKER 16 QUAD SPLITTER WITH DB9 J-Box J-Box - J-Box #1 J-Box #2 Orange 1 Host A Yellow 2 Host B Orange 3 Auxiliary A Yellow 4 Auxiliary B White 2 28 Vac Red 3 Black 4 28 Vac Yellow 5 SensorNet B EIM Transformers UNTERMINATED NOTE: AD TOUCH TRACKER 16 supports up to 2 controllers. Terminate on the EIM that is on an end point of the SensorNet network. DB9 (M) EIM # EIM #2 1-2 TERMINATED 2-3 UNTERMINATED 5 4 Wiring Yellow 2 SensorNet B Black 3 Red 4 White 5 NOTE: The maximum combined SensorNet cable length is 19m (4000'). TERMINATED Call DB9M-DB9F SERIAL CABLE Main DB9 (F) QUAD SPLITTER in power remote out 12 vdc. 1 amp alarm monitor vcr G1 G2 G3 G4 cam 1 cam 2 cam 3 cam Rev. B 3
4 TOUCH TRACKER WITH QUAD SPLITTER, continued ADTT16 Calibrating the Tracker Ball ''()%'!16%7/18%"#'*%+,'-./ '3..%3$'-+'/)%'40$&/'20+%" 5" #$%&&'/)%'2%4/'6--*74-8,&'9,//-+':20+%'!;'/- &%2%8/'/)%'!16%7/18%"#'*%+,'-./0-+" <" A" #$%&&'!"#$'/-'%B0/"!"#$%&#'%#(%)#"%**%+#,-./#0(1)2&.)0%(#%(#)/,#1.2,,(3 )/,#'%4,#4-$#(%)#"&(.)0%(#52%5,2*$6#7,8.-*092-), )/,#:2-.;,2#<-**#0"#)/,#'%4,#'%,1#(%)#5-(#%2#)0*) Configuring Devices!" #$%&&'!"#$% 2. C&0+D'/)%'($38E%$'F322G'&8$-22'H-1+'/-'!"#$%& ()*%+),9!"#$%&'()*%+),'*%+,'-./0-+" A" #$%&&'&"'('/-'&/%.'/-'/)%'H%I08%'8-+40D,$3/0-+ 4-$'/)0&'0+&/3223/0-+" J" #$%&&'!"#$'/-'&%2%8/'/)%'H%I08%'8-+40D,$3/0-+ 3+H'%B0/" Resetting a Dome!" C&%'/)%'+,*9%$'9,//-+&'/-'&%2%8/'/)%'H-*%'/- $%&%/G'/)%+'.$%&&')*+" 5" #$%&&'!"#$" 3. C&0+D'/)%'($38E%$'F322G'&8$-22'H-1+'/-':),)8 ("0). A" #$%&&'/)%'2%4/'6--*74-8,&'9,//-+':20+%'!;'-$ :),)8'("0)'*%+,'-./0-+" :/,#'%4,#+0**#1,('#-#2,D&,1)#)%#)/,#1,*,.),' '%4,#)%#2,9%%)6#A"),2#-#920,"#',*-$3#)/,#.%()2%**,2 +0**#2,)&2(#)%#=-4,2-#=%()2%*#E%',6 Toggling between the Primary and Secondary Unit 2. C&0+D'/)%'($38E%$'F322G'&8$-22'H-1+'/-'-"&./%01/234#5. -"&'./%01/234#5'*%+,'-./0-+" A" #$%&&'&"'('/-'/-DD2%'9%/1%%+',&0+D'/)%.$0*3$K':L30+;',+0/'4-$'M%+&-$N%/'.-220+D'3+H 323$*'*-+0/-$0+D'-$'3&'/)%'&%8-+H3$K':?322;,+0/'10/)'20*0/%H',&%$'4,+8/0-+320/K" J" #$%&&'!"#$'/-'$%&%/'/)%'8-+/$-22%$'3&'3.$0*3$K'-$'&%8-+H3$K',+0/" :/,#.%()2%**,2#+0**#2,9%%)#-('#2,)&2(#)%#)/,#=-4,2- =%()2%*#E%',6 Toggling between Zoom and Focus 2. C&0+D'/)%'($38E%$'F322G'&8$-22'H-1+'/-'-"& ;""03<"+=,. -"&';""03<"+=,'*%+,'-./0-+" A" #$%&&'&"'('/-'&10/8)'/)%'O--*'3+H'=-8,& 4,+8/0-+&'9%/1%%+'/)%'$0D)/'3+H'2%4/'9,//-+&" J" #$%&&'!"#$'/-'%B0/" Adjusting V-Phase 5" >5?=,8'@A.B1,)'*%+,'-./0-+" A" #$%&&'&"'('-$',-"./0$1'/-'-9&%$I%'PQ#)3&% /)$-,D)'/)%'-&8022-&8-.%'-$'=2,E%'&8-.%" J" #$%&&'!"#$'/-'%B0/" >""8*0(,#'%4,1#%2#"0F,'#.-4,2-1#+0**#G,(,2-),#-#+-2(0(G 9,,5#-('#'01-**%+#&1,#%"#)/,#H8I/-1,#&)0*0)$6#J%2 -''0)0%(-*#0("%24-)0%(#%(#-'K&1)0(G#H8I/-1,3#1,,#)/, L,2M0.,#1,.)0%(#%"#)/,#AN#:>?=@#:7A=BC7##OP#4-(&-* , Rev. B TOUCH TRACKER with Quad Splitter
5 TOUCH TRACKER WITH QUAD SPLITTER, continued AD TOUCH TRACKER 16 Providing System Information 2. C&0+D'/)%'($38E%$'F322G'&8$-22'H-1+'/-'C2,8)0 D#$". H0&.23K&'/)%' D'*%&&3D%R Primary Unit A" #$%&&'&"'('/-'&/%.'/)$-,D)'/)%' D *%&&3D%&R J" ROM Checksum 0A7B Performing SensorNet Ping Test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an FSR Calibration V l Left Right Min Max Up Down Tilt FSR Calibration Values Product Code F Indicates Flash PROM Product Code E Indicates EEPROM S" #$%&&'!"#$'/-'%B0/" Rev. B 5
Installation Instructions
ADS32X Touch Tracker with Video Matrix Switcher Installation Instructions Parts Required Touch Tracker Installation Kit: Part Number 0351-0474-07 INSTL KIT, TOUCH TRKR, W/ 1 Description Qty Part No. CABLE
More informationInstallation Instructions
Installation Instructions VM32 Enhanced 1 TOUCH TRACKER 1 RCTTRK32E With VM32 Video Matrix Switcher Menu Output Clear Off Iris Close Open About this Guide Info On Peel B A 7 0 1 4 5 8 9 2 6 3 Previous
More informationINDEX. Analog Board Boot and Voltage Test 2 Testing Input Channels 3 Testing Output Channels 4
INDEX Analog Board Boot and Voltage Test 2 Testing Input Channels 3 Testing Output Channels 4 Digital Board Boot and Voltage Test 5 Testing Input Channels 6 Testing Output Channels 7 Display Testing 8
More informationPoE/FPR Kit for Auto-Sync Time Clock. The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery.
ASTCPOEK PoE/FPR Kit for Auto-Sync Time Clock The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery. The ASTCPOEK Kit provides Power over Ethernet with Full Power
More informationQuick Reference Guide
Quick Reference Guide ADTT32E Enhanced 1 TOUCH TRACKER Overview Initiates the currently selected dome's Apple Peel pattern. Displays the dome's ID code. Toggles the state of the dome's output. Starts the
More informationDUAL SWITCH CONTROLLER
DUAL SWITCH CONTROLLER INSTRUCTION MANUAL IMPORTANT: If the Dual Switch Controller is to be used with a Dielectric 50000 Series Switch, control cable P/N 1100007364 or 11000007365 must be used. See Section
More informationThis document describes the procedure for doing a power trace on the SM5 and Gauntlet Stepmills.
SM5/Gauntlet Stepmill Power Trace Applies to: SM5 (150005) + Gauntlet (150015) This document describes the procedure for doing a power trace on the SM5 and Gauntlet Stepmills. Latest Rev. Warning: the
More informationActive UTP Transceiver Hub with Integral Isolated Camera Power
Active UTP Transceiver Hub with Integral Isolated Installation Guide HubWayEX16SP - UL Listed sixteen (16) Channel Active UTP Transceiver Hub with Integral Isolated Rev. 011810 More than just power. TM
More informationPassive UTP Transceiver Hub with Integral Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubWay8D HubWay16D - Eight (8) Channels - Sixteen (16) Channels HubWay82D HubWay162D - HubWay8 w/eight (8) HubWayAv - HubWay16
More informationTHE CTB08D LIGHT CONTOLLER
THE CTB08D LIGHT CONTOLLER The CTB08D is a one of the components in the Hobbyist line of Light- O-Rama products. The CTB08D must be used in conjunction with the Light-O-Rama software package. This controller
More informationActive UTP Transceiver Hub with Integral Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Installation Guide Models Include: HubWayLD8D HubWayLD16D - Eight (8) Channels - Sixteen (16) Channels HubWayLD82D HubWayLD162D - HubWayLD8D w/eight (8) HubWayAv
More informationINSTALLATION INSTRUCTIONS 920 EntryCheck TM
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920 EntryCheck TM The EntryCheck 920 Indoor/Outdoor Keypad is a surface-mount
More informationTransceiver Hub with Integral Camera Power
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubWay8CD HubWay16CD - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver Hub
More informationRack Mount Power Supplies
Rack Mount Power Supplies Installation Guide Models Include: VertiLine33D - 12VDC @ 8A - Sixteen (16) PTC protected outputs VertiLine33TD - 12VDC @ 16A - Sixteen (16) PTC protected outputs VertiLine63D
More informationLightning Stitch Assembly
ABM International, Inc. 1 1.0: Parts List Lightning stitch motor and drive assembly (Qty. 1) Lightning stitch piggy backed controller board assembly (Qty. 1) Touchscreen (Qty. 1) 2 9-pin Serial cable (Qty.
More informationPassive UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWay8Di HubWay16Di - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver
More informationINSTRUCTION MANUAL Ver 3.0. Indoor Pan, Tilt and Zoom Dome Camera / ACD-1000-LG27
INSTRUCTION MANUAL Ver 3.0 Indoor 1 Introduction Features 3 Components 4 System Configuration 5 2 RS485 and PTZ Basics Physical Connection 6 Multiple PTZ Setup 7 ID, Protocol, Baud Rate 9 3 Installation
More informationActive UTP Transceiver Hub with Integral Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Installation Guide Models Include: HubWayLD8CDS - UL Listed eight (8) Channel Active UTP Transceiver Hub with Integral HubWayLD82CDS - UL Listed eight (8) Channel
More informationUser Manual. PCKeypad Wireless Keypad
User Manual PCKeypad Wireless Keypad Description The PCKeypad is a wireless keypad with a PentaCODE transmitter built-in. It works with all of Elsema s PCR series receivers. The installer has the option
More informationINSTALLATION INSTRUCTIONS FOR THE BV10-100/1000
INSTALLATION INSTRUCTIONS FOR THE BV10-100/1000 This document describes the basic steps for installing your BV10-100 or BV10-1000. For detailed information about the BV10-100/1000, see the Ethernet Performance
More informationFVT/FVR20D2I1C4E INSTALLATION AND OPERATION MANUAL
2-CHANNEL 10-BIT DIGITALLY ENCODED VIDEO + 2 BI-DIRECTIONAL DATA + AIPHONE INTERCOM + 4 CONTACT CLOSURE + 100MB ETHERNET + REDUNDANT POINT-TO-POINT DUAL SFP OPTICAL PORTS The series utilize 10-bit digital
More informationQuick Start Installation Guide
istar Pro Quick Start Installation Guide Version B0 Part Number UM-069 January 2005 OVERVIEW This guide defines all of the commonly used connection methods to the istar Pro. It outlines how to wire readers
More informationINSTALLATION INSTRUCTIONS 920P EntryCheck TM
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920P EntryCheck TM The EntryCheck 920P Indoor/Outdoor Keypad is a surface-mount
More informationHigh Power over Ethernet Midspans PD Port Model PD Port Model
Data and Power on a Single Line High Power over Ethernet Midspans PD-8006-6 Port Model PD-8012-12 Port Model User Guide Notice The information contained herein is believed to be accurate and reliable at
More informationActive UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWayLD8Di HubWayLD16Di - UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP Transceiver
More information1993 SPECIFICATIONS CSJ , ETC. & SPECIAL SPECIFICATION ITEM 6132 ARTERIAL TRAFFIC MANAGEMENT SYSTEM
1993 SPECIFICATIONS CSJ 1685-05-068, ETC. & 1685-02-042 1.0 DESCRIPTION SPECIAL SPECIFICATION ITEM 6132 ARTERIAL TRAFFIC MANAGEMENT SYSTEM THIS ITEM DESCRIBES THE OPERATION AND INSTALLATION OF AN ARTERIAL
More informationHome Automation Systems Installation Guide for FFI Actuator & Control Projects
Home Automation Systems Installation Guide for FFI Actuator & Control Projects This installation guide is for home automation systems such as Crestron, Lutron and others which communicate with FFI controllers
More informationQuick Guide 1 2 3? F3 F AUX PRE 0 CLEAR MONITOR
Master Control Station Freeze Bypass Tour F F2 Quick Guide N IT E N TE R 3? F5 F6 S E T P F O R M F3 F4 4 5 6 AX 7 8 9 PRE F7 F8 Alarm A T CAMERA 0 CLEAR MONITOR M EN Restore This quick guide covers systems
More informationE2460GS Oscilloscope Upgrade Kit
Installation Instructions for E2460GS Oscilloscope Upgrade Kit Agilent 1670G-Series Logic Analyzers This kit upgrades either the Agilent Technologies 1670G, Agilent 1671G, Agilent 1672G, or the Agilent
More informationCM X8 Matrix Switcher/ Controller
CM6800-48X8 Matrix Switcher/ Controller Installation/ Operation Manual C1515M-A (11/01) Pelco 3500 Pelco Way Clovis, CA 93612-5699 USA www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX
More informationUSBCNC USB Disk Key reader for CNC Controls Machine Mount instructions
USBCNC USB Disk Key reader for CNC Controls Machine Mount instructions 2008-2015 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla St. Chatsworth, CA 91311 www.calmotion.com Introduction This
More informationTrouble Shooting Leveling Control Box Electric Jacks. Touch Pad LED Probable Cause Solution
Trouble Shooting Leveling Control Box 140-1224 Electric Jacks Copyright Power Gear Issued: January 2013 #82-L0524, Rev. OA Touch Pad LED Probable Cause Solution 1. On/Off LED will not light 2. Wait LED
More informationInstallation Instructions
Installation Instructions Ecast EQ to AMI hardware conversion KIT #26683701 This kit is for use in Ecast EQ jukeboxes. Tools Required #2 Phillips screw driver, #1 Phillips screw driver, Small flat blade
More informationCM9760-KBD and CM9760-KBR Series Keyboards FULL FUNCTION, VARIABLE-SPEED, PTZ CONTROL
PRODUCT SPECIFICATION analog systems and controls CM9760-KBD and Series Keyboards FULL FUNCTION, VARIABLE-SPEED, PTZ CONTROL Product Features Variable-Speed, Vector-Solving Joystick for PTZ and Dome Control
More informationNPort 6600 Series Quick Installation Guide
NPort 6600 Series Quick Installation Guide Edition 10.0, November 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationE1135C PDU and Pod Upgrade Procedure
E4030-90010 Rev. B 12/2003 In this Document... Tools Needed, 2 Contents of the Upgrade Kits, 2 Installation Procedures, 4 Verifying the Power Option of the New PDU, 4 Removing the PDU from the Support
More informationBlack & White Camera Kit with Multiplexer Video Surveillance System
1 cam Video S equ en ce C all C a mer a Black & White Camera Kit with Multiplexer Video Surveillance System Installation and Setup Guide Cameras (4) Monitor RABW4MUX Function Zoom Main Monitor Line Tape
More informationAL168 Series Multi-Output Power Supplies
AL168 Series Multi- Power Supplies Installation Guide Models Include: AL168CB - 16VAC @ 6A (100VA) or 18VAC @ 5.5A (100VA). AL168175CB - 16VAC @ 10A (175VA). AL168300CB - 16VAC @ 18A (350VA) or 18VAC @
More informationLANCNC FTP Data Server for CNC Controls Machine Mount instructions
LANCNC FTP Data Server for CNC Controls Machine Mount instructions 2008-2016 Calmotion LLC, All rights reserved Calmotion LLC 21720 Marilla Street Chatsworth, CA 91311 www.calmotion.com Introduction This
More informationDigital Keypad Introduction
K2 Digital Keypad Introduction The K02 uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure. All programming
More informationEthernet Interface Module
Interface Manual 1 Ethernet Interface Module SignalFire Number: ENET-DIN The SignalFire Ethernet Gateway has the following features: - Wide range DC power input. 6 to 36VDC - Power Over Ethernet (POE)
More informationPerle SMI Media Converter Installation Guide
Perle SMI Media Converter Installation Guide P/N 5500316-14 Overview This guide contains instructions necessary for the installation and operation of the Perle SMI Media Converter. This media converter
More informationQuick User Guide. Via Don Arrigoni, Rovetta S. Lorenzo (Bergamo)
Quick User Guide Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelitgroup.com e-mail : export.department@comelit.it Image Model Description IPPTZ773A IPPTZ777A 12x Full HD Mini-PTZ
More informationADSDUIOB / ADSDUIOBW Mounting Base Indoor Installation
ADSDUIOB / ADSDUIOBW Mounting Base Indoor Installation Installation Guide Warnings and Cautions Please review the following warnings and cautions before you install the mounting base. For additional warnings
More informationABM International, Inc. Lightning Stitch Checklist 9/13/2013
ABM International, Inc. Lightning Stitch Checklist 9/13/2013 1) Piggy backed board assembly (1) Piggy back board assembly tested? Yes No 24v passed XB passed XA passed YB passed YA passed SAFE passed S/S
More informationCode Dynamics, Inc. Port Splitter
Code Dynamics, Inc. Port Splitter Thank you for purchasing the Port Splitter. With this product, you can utilize a single Andover port for both the modem and PC connections. This device connects to the
More informationWarning Before Installation
Warning Before Installation English Power off the Network Camera as soon as smoke or unusual odors are detected. Refer to your user's manual for the operating temperature. Contact your distributor in the
More information2200 Series. Quick Start Guide SAFETY CHECKLIST. Safety Made Simple
Safety Made Simple SAFETY CHECKLIST KEEP unqualified/unauthorized personnel away from the test area ARRANGE test stations in a safe and orderly manner NEVER touch products or connections during a test
More informationModel 160. Model 186. Model 247. Surge Protective Devices. Installation & Operation Manual. Model 160. Model 186. Model 247 (EDCO RM-CX06-16R)
Surge Protective Devices Installation & Operation Manual Model 160 (16-Channel Coaxial) Model 186 (16 or 48 Channel Hi Speed Data Line Protector) Model 247 (120VAC Active Tracking Filter) Model 160 (EDCO
More informationA Axis M-Functions Level 1 A Axis Standard A Axis SMT Level 2. Each console includes the following:
Hardware List The 3000M Crusader II Upgrade system has been custom configured to provide the necessary hardware required for installation on your machine. Verify that you have received all the correct
More informationInstallation Instructions
Second Kit for the GrandSTAR Jukebox Kit #26694913 Purpose: These instructions outline the procedures to install a second 1000W into the GrandSTAR jukebox with the AV controller (shown) or the 4 Channel
More informationDATA CONNECT ENTERPRISE
DATA CONNECT ENTERPRISE User s Manual IG202T and IGV23 Modem Document Number 520-01005-001 Rev. A DATA CONNECT Contents Contents... iii Figures... iv Chapter 1 Introduction... 5 Features...6 Applications...7
More informationLC1003A IP Security CCTV Connector Installation Guide
LC1003A IP Security CCTV Connector Installation Guide Responsibilities Black Box Corp. declines all liability for any damage that might result from any errors or omissions in this document or from improper
More informationSidewinder Pumps Inc. AC Timer/Controller
Sidewinder Pumps Inc. AC Timer/Controller Page 1 of 12 Rev 032417 Table of Contents 1. Warnings-------------------------------------------------------------------------------------------------- 3 1.1.
More informationULTRASONIC VOCALIZATION DETECTOR TEST PACKAGE
ULTRASONIC VOCALIZATION DETECTOR TEST PACKAGE USER S MANUAL ANL-939 User s Manual DOC-161 Rev. 1.3 Copyright 2007 All Rights Reserved MED Associates, Inc. P.O. Box 319 St. Albans, Vermont 05478 www.med-associates.com
More informationInstruction Manual. 2in1 LAN Tester & Multimeter. Model: 57314
Instruction Manual 2in1 LAN Tester & Multimeter Model: 57314 1 Contents Introduction... Features... Safety Precautions.. Meter Description... Electrical Specification... Operation.. AutoRanging Multimeter.
More informationMultiple Digital Messaging Unit
HARRIS DRACON DIVISION Multiple Digital Messaging Unit Installation and Configuration Copyright 994 Harris Dracon All Rights Reserved Written/Printed in U.S.A. 0II7404-00 Issue, Nov. 994 Notice Every effort
More informationHardware User s Manual. Digital Video Motion Detector DVMD1-X
Hardware User s Manual Digital Video Motion Detector DVMD1-X Version 010 Revision A July, 2004 2395 Kenwood Drive Boulder, CO 80303 (303) 543-0440 TECHNICAL SPECIFICATIONS VENDOR Radiant Inc. http://www.dvmd.com
More informationInstalling and Removing SDRAM and DRAM
CHAPTER 4 This chapter explains how to remove and replace the main memory modules on the network processing engine or network services engine. For the location of the memory module you are replacing, find
More informationWarning Before Installation. Package Contents EN - 1. Refer to your user's manual for the operating temperature.
510000221G Warning Before Installation English Power off the Network Camera as soon as smoke or unusual odors are detected. Do not place the Network Camera on unsteady surfaces. Do not insert sharp or
More informationProfessional Pan Tilt Zoom Camera ST-HD-PTZ-2MP INSTALLATION MANUAL
Professional Pan Tilt Zoom Camera ST-HD-PTZ-2MP INSTALLATION MANUAL www.nacebrands.com www.securitytronix.com Description: The ST-HD-PTZ-2MP is a professional-grade intelligent dome color camera with Pan/Tilt/Zoom
More informationOFFICE UPS MULTI-DEVICE PROTECTION UPS 500S/600S/750S
OFFICE UPS MULTI-DEVICE PROTECTION UPS 500S/600S/750S USER S MANUAL 1.Safety instructions Thank you for selecting this uninterrupted power source. It provides you with better protection for connected equipment.
More informationCM X6 Matrix Switcher
INSTALLATION/OPERATION CM800-2X Matrix Switcher C1522M-C (2/05) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS... DESCRIPTION... 7 MODELS... 10 ASSOCIATED EQUIPMENT... 10 COMPATIBLE PRODUCTS...
More informationSTANDALONE PRESSURE DISPLAY SYSTEM OPERATIONS AND MAINTENANCE MANUAL
STANDALONE PRESSURE DISPLAY SYSTEM OPERATIONS AND MAINTENANCE MANUAL p/n ALS5A100 TABLE OF CONTENTS SECTION DESCRIPTION 1.0 GENERAL DESCRIPTION 2.0 SYSTEM OPERATING INSTRUCTIONS 3.0 DRAWINGS, PARTS LISTS
More informationINSTALLATION INSTRUCTIONS 921P EntryCheck TM
80 Avenida Acaso, Camarillo, Ca. 90 (805) 494-06 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 9P EntryCheck TM The EntryCheck 9P Indoor/Outdoor Keypad is a surface mount
More informationVITEK VTD-IR2811DN FEATURES: 1/3 Color CCD with 560 TV of Lines Resolution (600 TV Lines in B/W mode)
VTD-IR2811DN 560 TV Line Indoor Day/Night IR Dome Camera VITEK FEATURES: 1/3 Color CCD with 560 TV of Lines Resolution (600 TV Lines in B/W mode) 20 Infrared LEDs enable Viewing in Total Darkness up to
More informationThermometer / Barometer System
TBX USER S MANUAL Thermometer / Barometer System 616TA Pg.2of12 TABLE OF CONTENTS QUICK START GUIDE... 3 INTRODUCTION... 6 SPECIFICATIONS... 6 TERMINAL COMPARTMENT LAYOUT... 7 FEATURES... 8 OPERATION...
More informationJ1 Harness Connector Parts (Male Pins & Plug Housings) Picture QTY Used in Manufacturer Manufacturer PN Description Molex Cross Reference
Molex Plug PENTA J Power Harness - P/N MVP-4037-08-J 6-Pin Molex Position Color Use J Block 4 Red Main Power In J. 2 5 2 Black Return In J.2 3 6 3 White or Blue Ignition In J.3 Rear View 4 Red Main Power
More informationProcedure to Upgrade from B&W Maintenance Panel to TIB Color Touchscreen Door in a Working Maxum or Maxum II Analyzer Equipped With a SYSCON2
Procedure to Upgrade from B&W Maintenance Panel to TIB Color Touchscreen Door in a Working Maxum or Maxum II Analyzer Equipped With a SYSCON2 Difficulty Level: High Estimated time to execute: 3 Hours Revision
More informationManual# Installation Manual. 200E Series. DCU 210E/208E Engine Panel RP 210E/220E Remote Panel
Manual# 1006495 Installation Manual 200E Series DCU 210E/208E Engine Panel RP 210E/220E Remote Panel Installation Manual for the Marine Pro 200E Series ~~~ DCU 210E/208E Diesel Engine Control Unit RP 210E/220E
More informationBCM2 Series Branch Circuit Monitors Quick Setup Guide
BCM2 Series Branch Circuit Monitors Quick Setup Guide Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA 70E in the USA, or applicable
More informationQUICK SETUP GUIDE. BCM2 Series Branch Circuit Monitors. Safety Information. Equipment Maintenance and Service. Raritan DANGER!
QUICK SETUP GUIDE BCM2 Series Branch Circuit Monitors Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA 70E in the USA, or applicable
More information4170 POS System Installation Guide
4170 POS System 4170 Installation Guide Thank you for selecting UTC RETAIL s innovative Model 4170 Point of Sale solution! This Installation Guide will help you efficiently install the 4170 POS. The document
More informationHVG400. Installation Guide
HVG400 Installation Guide September 2013 Trademarks & Copyright Trademarks All trademarks mentioned in this manual are the sole property of their respective manufacturers. Copyright Ltd., Jerusalem, Israel
More informationCAMit I Camera with built in Modem
CAMit I Camera with built in Modem User s Manual CAMit I AP revision: 3.3 CAMit I Setup revision: 2.0.1 Manual revision: 2.0 Date: February 27, 2002 Congratulations You just acquired a fine product from
More informationManual Supplement. Manual Title: ESA609 Users Supplement Issue: 7 Print Date: February 2014 Date: 2/19 Revision/Date: 1 Page Count: 13
Manual Title: Supplement Issue: 7 Print Date: February 2014 Date: 2/19 Revision/Date: 1 Page Count: 13 This supplement contains information necessary to ensure the accuracy of the above manual. This manual
More informationContents. Chapter 1 Introduction to the CP-10. Keys and Functions Checking Software Version Technical Support...1-5
Contents Chapter 1 Introduction to the CP-10 Keys and Functions....1-2 Checking Software Version....1-5 Technical Support...1-5 Chapter 2 Executing Switches Chapter 3 Verifying Signal Status Verifying
More informationSC6540. Quick Start Guide
C TÜV Rheinland US Quick Start Guide SC6540 Model SC6540 SAFETY CHECKLIST Survey the test station. Make sure it is safe & orderly. Always keep unqualified/unauthorized personnel away from the test area.
More information8806 Series. 15 Multi-functional Touch Panel PC. Quick Reference Guide
8806 Series 15 Multi-functional Touch Panel PC Quick Reference Guide 1st Ed 10 July, 2009 8806 Contents 1. Getting Started...3 1.1 Safety Precautions...3 1.2 Packing List...3 1.3 System Specifications...4
More informationParts Required. Installing the Network Adapter Card ETHERNET LAN ADAPTER INSTALLATION INSTRUCTIONS. POS/EM Systems
Parts Required This kit, P/N 035-9-0, provides components, software, and instructions for installing an Ethernet LAN adapter in a POS/EM Value system and associated software for a POS/EM Value NCR Unity
More informationM260 Load Cell Amplifiers
E L 4 - + 2-3 1-2 M260 Load Cell Amplifiers Description. This fast start guide shows basic installation, setup, and calibration for most applications. For more specific information contact Minsterport.
More informationHydroGuard 4 to 20 ma Output Module. For use with HydroGuard Water Quality Monitor and Controller
HydroGuard 4 to 20 ma Output Module For use with HydroGuard Water Quality Monitor and Controller Technician's Manual Installation, Operation, and Maintenance Guide Chapter 1: Preface... 3 1.1 Intended
More informationLocal Set Point Module Operating Bulletin
Local Set Point Module Operating Bulletin 1 Notice: The manufacturer reserves the right to make any changes and improvements to the products described in this manual at any time and without notice. This
More informationOverview. Features CHAPTER
CHAPTER 2 This chapter provides these topics that describe the Catalyst 2955 switch, hereafter referred to as the switch. Features, page 2-1 Front-Panel Description, page 2-3 Rear-Panel Description, page
More informationUpgrade Instructions. View Manager 96 v Software Upgrade. The system displays the following prompt:
WORLD LEADER IN ELECTRONIC SECURITY Upgrade Instructions View Manager 96 v. 5.0 1 Software Upgrade This software permits you to upgrade your VM96 version 3.x or 4.x system to the latest version of VM96
More informationST-C5VRS-600 VIDEO AND RS232 EXTENDER Installation and Operation Manual
NTI R NETWORK TECHNOLOGIES INCORPORATED XTENDEX TM Series ST-C5VRS-600 VIDEO AND RS232 EXTENDER Installation and Operation Manual Manual 039 Rev. 3/13/03 WARRANTY INFORMATION The warranty period on this
More information-C5RS-LC RS232 EXTENDER
XTENDEX Series ST-C5RS-LC RS232 EXTENDER Installation and Operation Manual ST-C5RS-LC RS232 Extender Man249 Rev. 10/30/17 TRADEMARK XTENDEX is a registered trademark of Network Technologies Inc in the
More informationPerle IDS-108F(XT) Unmanaged 10/100 Ethernet Switches. Installation Guide. P/N (Rev G)
Perle IDS-108F(XT) Unmanaged 10/100 Ethernet Switches Installation Guide P/N 5500339-10 (Rev G) Overview This document contains instructions necessary for the installation and operation of the Perle IDS-108F
More informationIntellex Digital Video Management System. Intellex Version 2.2 to 2.3 Upgrade Instructions
Intellex Digital Video Management System Intellex Version 2.2 to 2.3 Upgrade Instructions 2 Intellex Digital Video Management System Notice Copyright The information in this manual was current when published.
More informationand Network Interface Modules Installation Instructions
4010-9817 and 4010-9821 Network Interface Modules Installation Instructions Cautions and Warnings DO NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS DAMAGED. Upon unpacking your Simplex product, inspect the
More informationPLEASE READ INSTRUCTIONS CAREFULLY BEFORE INSTALLATION!
TUC2 / TUCH2 Model Series Installation Instructions PLEASE READ INSTRUCTIONS CAREFULLY BEFORE INSTALLATION! APPLICATION The TUC2 provides temperature space monitoring with a backlit LCD. The TUCH2 provides
More information2 in1 LAN Tester & Multimeter. Model: PCE-LT 1
www.pce-industrial-needs.com Tursdale Technical Services Ltd Unit N12B Tursdale Business Park Co. Durham DH6 5PG United Kingdom Phone: +44 ( 0 ) 191 377 3398 Fax: +44 ( 0 ) 191 377 3357 info@tursdaletechnicalservices.co.uk
More informationADC7520 SERIES. 1600W Battery Chargers and Power Supplies
ADC7520 SERIES 1600W Battery Chargers and Power Supplies Wide output adjustment range 0 72VDC Analog control by external 0-5VDC voltage Temp.comp charging, sense as on option Power fail relay alarm Master-Slave
More informationSNC-DF40P High Resolution Minidome Color Camera with 10/100 Base T Ethernet
ARCHITECT & ENGINEER SPECIFICATIONS SECTION 16780 VIDEO SURVEILLANCE SYSTEMS SNC-DF40P High Resolution Minidome Color Camera with 10/100 Base T Ethernet PART 2 PRODUCTS 2.01 CCTV / NETWORK CAMERA SPECIFICATIONS
More informationP6210 PN: 86085A A
P6210 1 PN: 86085A1000010 86085A1000000 Zavio P6210 Quick Installation Guide Please follow the installation steps below to set up P6210 Pan/Tilt IR Dome IP Camera. Check the package contents against the
More informationAD-1 POWER SUPPLY. AD-1 listed AC ADAPTER. Supplies 12 Vdc to both AP-1TB and remote speaker/microphone.
6955 VALJEAN AVE, VAN NUYS, CA 91406 PH: (818)994-6498 / FAX: (818)994-6458 techsupport@louroe.com / www.louroe.com AP-1TB SINGLE ZONE TWO-WAY AUDIO BASE STATION INSTALLATION AND OPERATING INSTRUCTIONS
More informationSecurity and Convenience Components 519H Three-Channel Receiver
Security and Convenience Components 519H Three-Channel Receiver FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not
More information05/11/2012 Ins-30202 Net2 Entry - Monitor Paxton Technical Support 01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00-19:00 (GMT) Saturday from 09:00-13:00 (GMT)
More informationIntelligent Security & Fire Ltd
05/11/2012 Ins-30202 Net2 Entry - Monitor Technical Support 01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00-19:00 (GMT) Saturday from 09:00-13:00 (GMT) Documentation
More informationConnecting your EYEsurv ESC-PTZ-600 to your DVR
Connecting your EYEsurv ESC-PTZ-600 to your DVR Introduction: This guide will take you through each step in connecting your EYEsurv PTZ to your DVR allowing for full control and movement. Step 1: First
More information