RT300 Series Crane & Hoist Joystick. RunnTech. Potentiometer: ±32, Hall sensor: ±20
|
|
- Abraham Simpson
- 5 years ago
- Views:
Transcription
1 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick RT00 Series Crane & Hoist Joystick Product Features Single axis or dual axis control; Pure silver contacts to ensure durable; Spring return in 0-position or Friction brake adjustable; Resistant to oil, maritime climate, ozone and UV radiation; Support horizontal and vertical contact drive arrangements; The energized current up to 80V 0A, with reliable performance; million life cycles. Application 00 series industrial crane & hoist joystick (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 0Hz, 60Hz voltage 80V and 0V DC to control the hoist crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake. Technical Information Environment Parameter Storage Temperature Operating Temperature Protection Grade Vibration Amplitude±g, Frequency: 0Hz-00Hz Impact 0g, 6ms, Semi-sinusoidal EMC Anti-interference Rank 00V/m, 0MHz to GHz, 80% sine-wave modulation, meet EN008- (99) standard EMC Emission Rank Rank B, 0KHz to 0MHz, meet EN008- (99) standard ESD Anti-interference Rank Rank, 8KV contact discharge, KV air discharge, meet IEC standard Mechanical Parameter Mechanical Angle Operating Torque Mechanical Life Mechanical Error Electrical Parameter -0 C +80 C -0 C +80 C IP6 Potentiometer: ±, Hall sensor: ±0 N (0N max) million ±0. Power Supply Voltage ±0.V DC Hall sensor Power Supply Current Consumption 6.mA/hall sensor tel: fax: info@runntech.com website: 0
2 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Resolution Ratio infinite Maximum Voltage VDC Hall sensor Reversed Polarity Maximum Voltage.VDC Potentiometer Product Configuration Serial Number Operation Mode Load Resistance KΩ Median Voltage (no-load) 8 - %Vs Power Supply Voltage DCV Power Supply Current <0mA Resolution Ratio infinite Resistance (0%) KΩ and 0KΩ Electrical Angle ± Output Voltage Range (relative voltage) 0 00%; 0 90% Median Voltage 8% % Potentiometer Maximum Load Voltage VDC Maximum Power Consumption ( C) 0.W Switch Direction switch position ± No. Item Content RT00 Series Crane & Hoist Joystick Controller M - friction hold, MS - friction hold & center-lock, T - spring return to center, TS - spring return to center & center-lock Handle Assembly Type L: switch assembled Horizontal (default), I: switch assembled Vertical Electrical Output Form. Y axis. Y & X axis cross direction. Y & X axis full direction Hall sensor Potentiometer HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V6: DCV, 0 +V (voltage output) I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 0 tel: fax: info@runntech.com website:
3 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick 6 Potentiometer Type K, K, K, 0K, 0K or H (Hall sensor) 7 8 Contact Arrangement Handle/Grip Type Refer to Table - - Contact Arrangement Refer to Table - -8 Handle: HD, HD, HD, HD, HD, HD7, HD8, HD0, HD, HD80 9 Mounting Dimensions M: 8 8, central hole 6, M: 8 8, central hole 78 serial number operation mode limiter plate handle assembly type electrical output form Product Installation RT00 - MS - - L - P (0K) - () - HD9 - M L type mounting dimension handle/grip type contact arrangement potentiometer type I type tel: fax: info@runntech.com website: 0
4 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Handle Type HD HD HD HD HD HD7 HD8 HD9 HD0 HD9 with or without Self-resetting button (BT) or Self-lock button (BS) Reference - with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Push to release (mechanical button) with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Multi-combinations, Refer to Table - Multi-combinations, Refer to Table - -7 Diameter 0 60 Diameter Diameter Diameter 0 87 Diameter 0x60 Diameter 0 max Diameter Diameter 0 8 pull to release with latch for mechanical zero interlock Diameter 0 60 Diameter x HD80 with or without Self-resetting button (BT) or Self-lock button (BS) Reference - Diameter 9x6 0 tel: fax: info@runntech.com website:
5 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Handle HD9 HD9 Handle HD9 handle can be installed with a variety of accessories: self-lock button and self-resetting button. With different combinations to meet the industry's needs: solenoid valve amplifier control, variable frequency motor control. We can customize special technical parameters according to your requirements. HD9 handle use PA66 + 0GF, with excellent high temperature performance, can be installed in Joystick RT00 and RT0 to achieve multi-axis control Operation Temperature: -0-8 Storage Temperature: -0-8 Meet IEC68 part -0 Protection Grade IP6/6 HD9 - BT 7 R BS 6 G 6 7 handle type self-resettling button button quantity button location 8 button color button location button color button quantity self-lock button button selection reference Table - tel: fax: info@runntech.com website: 0
6 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Handle HD0 HD0 Handle 07 0 HD0 handle is ergonomically designed, provides a high degree of comfort, highly integrated, multi-channel buttons control output and the handle can be installed with a variety of accessories: analog output of thumbwheel controller, self-resetting (momentary) push button, self-locking push button or rocker switch. With different combinations to meet demands of industrial application for example: solenoid valve amplifier and variable frequency motor control. HD0 handle/grip uses PA66 + 0GF, with excellent high temperature performance, can be installed in joystick of RT00, RT00, RT0 and RT0 to achieve multi-axis control. Operation Temperature -0~-8 Storage Temperature -0~-8 C Meet Standard IEC68. part -0 Protection Grade IP6/6 Model Selection Style Description (all functions selection refer to the Table - HD0a 6 0 without Deadman trigger HD0b BT with Deadman trigger 06 tel: fax: info@runntech.com website:
7 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table -6 Handle HD0 Button Panel Model Selection Style Description (all functions selection refer to the Table -) W00 W00 W00 Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) Can install 6 self-resetting button (BT) / self-locking button (BS) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) Can install self-resetting button (BT) / self-locking button (BS) and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) tel: fax: info@runntech.com website: 07
8 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table -6 Handle HD0 Button Panel Model Selection Style Description (all functions selection reference Table -) 0 handle type handle panel model code self-resettling (momentary) button button quantity W00 Q proportional thumbwheel controller (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) Can install Self-resetting button (BT) / Self-locking button (BS), and proportional thumbwheel (W00) or rocker switch (QTOT) proportional thumbwheel controller (W00) or rocker switch (QTOT) HD0b - BT R G - QTOT position self-resetting rocker switch button color button location button selection refer to Table - 08 tel: fax: info@runntech.com website:
9 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Accessories No. Type Description Parameter Remark 6 BT BS QTOT QTO QSOS Table - Mounting Dimension Self-resetting button Self-locking button position self-resetting rocker switch position self-resetting rocker switch position self-locking rocker switch VA VA pins 0VA pins 0VA pins 0VA W00 Thumbwheel Controller (Hall Sensor) HV, HV, HV, HV No. Mounting Code Mounting Size Description M 8 8 central hole 6 button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W button color Red - R Blue - BL Black - B Yellow - Y Green - G White - W Warning: Please Far away from the magnetic object Application M central hole 78 tel: fax: info@runntech.com website: 09
10 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Contact Arrangement () 6 () 6 () 6 () 6 () 6 (6) 6 (7) () () () () (6) (7) (8) () () () () (6) (7) (8) () () (9) 0 0 tel: fax: info@runntech.com website:
11 Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick Table - Contact Arrangement () () () () () (6) (7) 0 (9) (0) () () () () () () 0 0 (8) () tel: fax: info@runntech.com website:
12 RT00 Series Crane & Hoist Joystick Electronics (Changzhou) Corp. Table - Directional Switch Signal Closed Position Electrical Output Form Entity on behalf of the switch is closed Hall sensor Potentiometer Analog output refer to the following figure I: wire ma ma 0mA (current output) I: wire 0mA ma 0mA (current output) 0 HV: DC V, 0. V (rail to rail) HV: DC V, 0...V HV: DC V,.0..0V HV: DC V,...7V P: Simple directions output (potentiometer with dead zone) P: Simple direction output (potentiometer without dead zone) V: DCV, -0V 0 +0V (voltage output) V: DCV, +0V 0 +0V (voltage output) V: DCV, -V 0 +V (voltage output) V: DCV, +V 0 +V (voltage output) V: DCV, 0 +0V (voltage output) V6: DCV, 0 +V (voltage output) tel: fax: info@runntech.com website:
RT02 Series Robust Industrial Joystick. RunnTech
Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick RT0 Series Robust Industrial Joystick Product Features Potentiometer sensor or Hall sensor; Single axis, dual axis or axis control; Resistant
More informationData Sheet for Joysticks
Finger Joystick Series 87 Dual redundant outputs IP67 sealed lever heights: 8mm and 60mm 5 lever colors Series 87 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationData Sheet for Joysticks
Finger Joystick Series 8 Dual redundant outputs IP6 sealed lever heights: 8mm and 60mm 5 lever colors Series 8 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationPRO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTROLLER
PO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTOLLE PO-6 Single Axis Heavy-Duty Joystick PO-6H Single Axis Heavy-Duty Hall-effect Joystick Construction: The ultra-rugged PO-6 provides precise proportional control
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Millionen cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman also available with USB- or CANbus-Interface The
More informationBF series Paddle controllers
A BF series The BF Series Paddle is the very latest generation in high precision contactless controls. It combines the features of a contactless single axis joystick and a switch in one control. Long trouble-free
More informationMulti-axis controller V 8 / VV 8
Multi-axis controller V 8 / VV 8 /30 03 The multi-axis controller V 8 is a rugged switching device according IEC/EN 947-5- for electro-hydraulic applications.the modular design enables the switching device
More informationData Sheet for Joysticks
Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 8 (on request) Several Output Options (analog, CAN, USB) The TRY80 series provides
More informationData Sheet for Joysticks
Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 68 (on request) Several Output Options (analog, CAN J1939, CANopen, USB) The
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Million cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman Optional interfaces: USB, CANbus J99 or CANopen The
More informationMS series Mid-size Hall effect joysticks
Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealed up to IP68 Available with USB Redundant outputs available 1 million life cycles Available with J1939 CANbus and
More informationHall-Effect Paddle Joystick
Hall-Effect Paddle Joystick Robust design for arduous applications Return-to-center or return-to-end options Under-panel depth minimized to 9mm Rated for 5 million cycles Hall-effect sensor technology
More informationem4 Accessories Digital expansions
em4 Accessories Digital expansions Up to two digital / analog expansions can be added to the em4 nanoplc to expand up to 46 I/Os 6 digital / analog configurable inputs (0-10 VDC, 0-28.8 VDC, Potentiometer)
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationCJ series Ergonomic multifunction joysticks
an APEM Group Company CJ series The CJ Series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick,
More informationData Sheet for Joysticks
Up to two pushbuttons in handle Protection Grade up to IP68 Optionally available with USB and CAN (J99) The TRY50 series covers the transition from finger- to handsize joysticks. This has been realized
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationAnalog micro push button
Analog micro push button for rugged applications 145MA... + 0.5...4.5 V DC analog output at 5 ± 0.5 V DC operating voltage + output signal can be adjusted within the voltage range + non-contact operation
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationData Sheet. JS6000 Joystick Base
Data Sheet JS6000 Joystick Base Mobile Machine Management The JS6000 joystick base is an element of the flexible, powerful, expandable, and affordable joystick family of mobile machine management products.
More information3000 series Premium Hall effect joysticks
Distinctive features and specifications Class leading installed depth
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationInstruction book IQAN-LSL. Publ no HY /UK Edition 0301
Instruction book IQAN-LSL Publ no HY17-8367/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationAccuStar Electronic Clinometer
AccuStar Electronic Clinometer Single Axis ± 60 Range The AccuStar Electronic Clinometer is an extremely accurate angle measurement device. This compact and rugged sensor is ideal where space is critical
More informationZ1 axis pot. (Rocker pot.) side operation. SW1 (ON when pushed)
Single, Dual, Triple or Quad Axis Position Hold or Spring Return Multiple Pushbutton Options Center and/or Directional Micro-Switches Center and/or Positional Detents 5 Mio. Operations Mechanical Life
More informationMulti-axial miniature joystick based on Hall Effect technology
Joystick with grip Multi-axial miniature joystick based on Hall Effect technology J... + space-saving design + highly reliable and long lifetime due to contactless Hall Effect technology + integrated third
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationPush Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
More informationConforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
More informationCurrent DC (ma) Storage Temp. ( C) Red 1.85 Vdc D. Voltage Vac/dc
features specifications Ø8.1mm mounting Black anodised aluminium housing Sealed to IP67 Wide viewing angle Suitable for high vibration applications Internal reverse protection diode fitted as standard
More informationCJ series Ergonomic multifunction joysticks
The CJ series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick, the CJ series utilizes non-contacting
More informationINSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers
2010-12-10 5011699201-PBB1 Eaton Logic Controller ELCB Controllers INSTRUCTION SHEET [Applicable Controllers] ELCB-PB10 ELCB-PB14 ELCB-PB20 ELCB-PB30 ELCB-PB40 IL05001005E 002-1310020-02 Thank you for
More informationMiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A...
Electronics & Software MiniAmp Type 5030A... Miniature Charge Amplifier The MiniAmp Type 5030A is a single channel, industrial charge amplifier, which converts the charge signal from piezoelectric sensors
More informationTM3DI16G module TM3-16 inputs spring
Characteristics module TM3-16 inputs spring Main Range of product Product or component type Range compatibility Modicon TM3 Discrete input module Modicon M221 Modicon M241 Modicon M251 Discrete input number
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationSetting big things into motion. Industrial Controllers Catalog 2018
Setting big things into motion. Industrial Controllers Catalog 208 Product range Tool for Designers, Engineers and Purchasing Agents Your tool for finding industrial controllers for cranes, electro-hydraulic
More informationWM-580. Electronic CANbus Joystick. Market Specification
Electronic CANbus Joystick Market Specification Product Description The joystick is a reliable, ergonomic and configurable control solution. We leveraged our experience in the controls industry, considered
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationSRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationAnalog electric proportional joysticks JEP
Analog electric proportional joysticks JEP 2.01.09 Index: Description: Page 3 Technical features: Page 4 Metering curve: Page 5 Overall dimensions: Pages 6 9 Control handles: Page 10 Rubber boot: Page
More informationHT series Ruggedized Hall effect joysticks
Distinctive features and specifications Rugged finger positioning control Available with CANbus J1939 Available with USB 1.1 HID compliant interface 1, 2 and 3 axis configurations 1 million life cycles
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More information3000 series Premium Hall effect joysticks
The 3000 Series is the very latest generation in high precision contactless joysticks. With a class leading installed depth of
More informationDI561 Digital Input Module
Ordering Data DATA SHEET DI561 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2101 1TNE 968 901 R3101 1TNE 968 901 R3103 1TNE 968 901 R3105 DI561, digital
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationTM3DI16 module TM3-16 inputs
Characteristics module TM3-16 inputs Main Range of product Product or component type Range compatibility Jun 30, 2018 Modicon TM3 Discrete input module Modicon M241 Modicon M251 Modicon M221 Discrete input
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationDC562, digital input/output module,
Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationindustrial panel lamps
features specifications Typical characteristics (Ta = C) Ø8.1mm mounting Robust bright nickel plated brass housing Low profile styling, sunlight readable LEDs Sealed to IP67 Internal reverse protection
More informationHFX series I First generation Hall effect joysticks
an APEM Group Company HFX series I The HFX Series I Joystick is designed for precision finger operated applications requiring proportional control and long trouble-free life. Featuring non-contacting Hall
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Page 1 Issued: May 1999 Status: New Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for arc detection Two high-speed
More informationOPTION SELECTION HFX SERIES LIMITER PLATE OUTPUT OPTIONS S Square V to 5V (Rail to Rail) R Round 1.5V to V X Slotted 2.25V to 4.75V Y Slotted 3 1V to
The HFX Series I Joystick is designed for precision finger operated applications requiring proportional control and long trouble-free life. Featuring non-contacting Hall effect technology for three million
More informationZelio Control-modular measurement and control relays 1
Presentation, description 1 106439 RM35 TM111MW Presentation Motor temperature measurement and 50MW and RM35 TM250MW monitor the following, on 3-phase supplies: correct sequencing of phases L1, L2 and
More informationDATA SHEET Selectable AC transducer, TAS-331DG
DATA SHEET Selectable AC transducer, TAS-331DG Measures power or reactive power on 3-phase AC networks Class 0.5 (IEC-688) measurement Supply and measuring voltage up to 690 V Easy configuration via PC
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationPCD3.C90. Date Modification Asked by: Version E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1
Manual PCD3.C90 Revision History Date Modification Asked by: Version 14.09.09 E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1 22.09.09 Added E/A Bus Connector PCD3.K116 Müller.R 1.2 06.01.10
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More informationElectronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.21 is an electronic timer from the CT-S range with OFF-delay. It provides 10 time ranges and a continuous rated control
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationPenny & Giles Technical Information JC8000
Penny & Giles Technical Information JC8000 Extremely robust design for arduous applications Center detent for enhanced return-to-center performance Under panel depth has been minimized to 78mm Pivot-point
More informationTM221CE24R controller M IO relay Ethernet
Product data sheet Characteristics TM221CE24R controller M221 24 IO relay Ethernet Complementary Main Discrete I/O number 24 Number of I/O expansion module Supply voltage limits Network frequency Inrush
More informationTF501, TF521 Terminal Bases
Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,
More informationNOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog
NOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog Special features non-contacting, magnetic long life electr. angle 720 up to 5760 in 360 -steps available (equates 2... 16 turns) continuous
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Data Sheet 4000 Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology Brief description
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationJC 300 MULTI-AXIS FINGERTIP JOYSTICK
JC 300 MULTI-AXIS FINGERTIP JOYSTICK Developed for those applications where weight and functionality are paramount, the JC300 offers switched or proportional fingertip control in up to three axes. Designed
More informationDX561 Digital Input/Output Module
Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI
More informationXU1-E Earth fault voltage relay. (August 1996) Manual XU1-E (Revision New)
XU1-E Earth fault voltage relay (August 1996) Manual XU1-E (Revision New) Woodward Manual XU1-E GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationJC6000 MULTI AXIS JOYSTICK CONTROLLER
JC6000 MULTI AXIS JOYSTICK CONTROLLER Innovation In Motion INNOVATION IN MOTION The new JC6000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles
More informationVert-X 05E 5V / % Ub. Application Access control systems Forklift
Sensor principle MH-C MH-C2 Electrical Data Measuring range 0... 360 - Indep. linearitiy (without misalignment) % of meas. range ±0.3 - Indep. linearitiy (with allowed misalignment @ 360 ) % of meas. range
More informationFL MC 2000E (SM40) LC
IEC 61850 fiber optic converter with LC fiber optic connection (1310 nm) to convert 100Base-Tx to single- or multi-mode fiber glass Data sheet 3205_en_C 1 Description PHOENIX CONTACT 2014-04-04 2 Features
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Issued: May 1999 Status: Updated Version: B/12.11.2001 Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for
More informationInstruction book IQAN-LST. Publ no HY /UK Edition 0301
Instruction book IQAN-LST Publ no HY17-8364/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationTechnical data sheet. Technical data
echnical data sheet LMQ4A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx 8 m orque 4 Nm Nominal
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationXXA18P1AM12 Ultrasonic sensor cyl. 90 deg M18 - Sn=1m - analog 4-20mA - SYNC - connector M12
Characteristics Ultrasonic sensor cyl. 90 deg M18 - Sn=1m - analog 4-20mA - SYNC - connector M12 Complementary Enclosure material Front material Supply voltage limits Function available [Sa] assured operating
More informationDC561, digital input/output module,
Ordering Data DATA SHEET DC561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2001 DC561, digital input/output module, 16 configurable inputs/outputs,
More informationEaton Logic Controller Modbus Distributed I/O Adapter Module INSTRUCTION SHEET
20101210 5011697701ERS1 Eaton Logic Controller Modbus Distributed I/O Adapter Module INSTRUCTION SHEET [Applicable Distributed I/O Adapter Module] ELCCARS485 IL05004008E 002121402002 CARS485 PO WER ALARM
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationTS series Proportional Hall effect thumbsticks
Distinctive features and specifications 1 or 2 axis Pushbutton handle option Non-contact Hall effect technology Submersible to 1m (3.28ft) per IP68 Threaded metal housing option Redundant outputs available
More information4100 and 4100/R Controllers
The TR TASC Unit speed controller is available in two formats: 4100 for panel mounting 4100/R for rack mounting Facilities are identical for the two models. Construction The p.c.b. card is 0.0625 in flame
More informationEPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number
Fieldbus Gateway RS-232 to PROFINET EPGG001 Part Number Easy handling Gateway from RS-232/422/485 interfaces to PROFINET With two Industrial Ethernet ports Technical Data Electrical Data Supply Voltage
More informationAO561 Analog Output Module
Ordering Data DATA SHEET AO561 Analog Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1201 AO561, analog output module, 2 AO, U/I 1TNE 968 901 R3102 Terminal
More informationTM3AI4 module TM3-4 analog inputs
Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible
More informationVert-X 32E - 24V / CANopen, redundant. Applications Forklifter Platformer Agricultural machine. Features. CiA approved CiA V402/
Sensor principle MH-C2 Electrical data Measuring range 0... 360 Indep. linearity (typ.) % of meas. range ±0.3 Max. hysteresis 0.1 Resolution bit 16 Max. repeatability 0.1 Sample rate khz 0.5 Max. temperature
More informationXU1-DC DC voltage relay. (June 1998) Manual XU1-DC (Revision New)
XU1-DC DC voltage relay (June 1998) Manual XU1-DC (Revision New) Woodward Manual XU1-DC GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More informationTM221CE40R controller M IO relay Ethernet
Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number
More informationConnector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable
44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationElectronic timer CT-ARS.11
2CDC 251 088 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function OFF delay timer without auxiliary voltage One device includes 7 time ranges (0.05 s 10 min) 1 c/o (SPDT) contact
More informationElectronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact The CT-EBD.12 is an electronic time relay with the function flasher starting with ON. It is from the CT-D range.
More informationElectronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers
More information