Standard actuator 440K-A Standard actuator 440G-A Fully flex actuator 440G-A07269

Transcription

1 Safety Interlock Overview 1 Product Selection Description Elf Cadet 3 T15 T15 GD T5T6 T5 GD T6 GD MTGD TLS GD Atlas 5 440G MT actuator 440KA11095 actuator 440KA1138 actuator 440GA07136 GD standard actuator Flat actuator, not to be used with metal alignment guide 440GA KA1014 GD flat actuator 440KA actuator, not to be used with metal alignment guide 440KA1006 Fully flex actuator 440GA7143 Fully flex actuator 440GA0769 Extended flat actuator Metal alignment guide with semiflexible actuator Alignment guide with semiflexible actuator 440KA KA KA11144 Alignment guide with fullyflexible actuator Catch and Retainer Kit Replacement Alignment Guide 440KA KA KA Visit our website:

2 Safety Tongue Elf Product Selection Safety Auxiliary Action Actuator Type M16 1 N.C. 1 N.O. N.C. Recommended s M16 Conduit 1/ inch NPT Adaptor Distribution Box 4Pin Micro (M1) Connector ArmorBlock Guard I/O 5Pin Micro (M1) Flat 440KE KE KE KE KE KE3305 GD Metal alignment guide w/semiflex actuator 440KE KE KE KE KE KE33076 Flat 440KE KE KE KENNFPS KE KE KE3304 GD Metal alignment guide w/semiflex actuator 440KE KE KENNAPS 440KE KE33079 For connector ratings see page 39. With a 5pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 313 for wiring details. Description Safety Outputs Auxiliary Outputs Terminals Reset Type Supply Cat. Page No. SingleFunction Safety Relays for N.C. Switch MSR17RP 3 N.O. 1 N.C. Removable (Screw) 4V AC/DC RN3135 MSR17TP 3 N.O. 1 N.C. Removable (Screw) Auto./Manual 4V AC/DC RN313 MSR30RT N.O. Solid State 1 N.O. Solid State Removable SingleFunction Safety Relays for 1 N.C. & 1 N.O. Switch Auto./Manual or 4V DC RN3198 MSR9T N.O. 1 N.C. Fixed Auto./Manual 4V AC/DC RF307 MSR33RT N.O. Solid State 1 N.O. Removable Modular Safety Relays MSR10P Base N.C. only MSR0P Input Module MSR310P Base MSR30P Input Module N.O. 1 N.C. and PNP Solid State Removable Auto. or Monitored Manual Auto./Manual or 4V DC SELV RF300 4V DC from the base unit RH3176 Removable 4V DC RH3178 MSR300 Series Output Modules 3 PNP Solid State Removable Auto./Manual PNP Solid State Removable 4V DC RW319 4V DC from the base unit Note: For additional Safety Relays connectivity, see the Safety Relays section (page 58) of this catalog. For additional Safety I/O and Safety PLC connectivity, see the Programmable Safety System section (page 5107) of this catalog. For application and wiring diagrams, see the Safety Applications section (page 101) of this catalog RW318 1 Connection Systems Description Connection to Distribution Box 4Pin Micro (M1) Connection to ArmorBlock Guard I/O 5Pin Micro (M1) 1 N.C. & 1 N.O. N.C. N.C. Cordset 889DF4AC 889DF4AC Patchcord 889DF4ACDM 889DF4ACDM 889RF5ECRM Distribution Box 898DP4 KTDM4 898D4 LTDM4 Shorting Plug 898D41KUDM 898D41LUDM TPort 898D43KYD4 898D43LYD4 Replace symbol with ( m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), ( m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 4 or 8 for number of ports. Note: For additional information, see the Safety Connection System section (page 71) of this catalog. 311

3 Safety Tongue Elf Description Dimensions 1 Approximate Dimensions Flat actuator, not to be used with metal alignment guide KA actuator, not to be used with metal alignment guide KA1006 Metal alignment guide with semiflexible actuator KA1030 Metal Alignment Guide KA1069 Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. Replacement Cover 440AA33085 Dust Cover 440KA (.95) 5 (0.98) 31 Visit our website:

4 Safety Tongue Cadet 3 Product Selection Safety Auxiliary Action 3 N.C. N.C. 1 N.O. Recommended s MBB Actuator Type M16 M16 Conduit 1/ inch NPT Adaptor Distribution Box 6Pin Micro (M1) Connector ArmorBlock Guard I/O 5Pin Micro (M1) Flat 440KC KC KC KCNNFPS KC KC KC1091 GD Metal alignment guide w/semiflex actuator 440KC KC KCNNAPS 440KC1070 Flat 440KC KC KC KC KC KC1067 GD Metal alignment guide w/semiflex actuator 440KC KC KC1055 Flat 440KC KC KC KC KC KC1068 GD Metal alignment guide w/semiflex actuator 440KC KC KC1080 For connector ratings see page 39. With a 5pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 317 for wiring details. Description Safety Outputs Auxiliary Outputs Terminals Reset Type Supply Cat. Page No. SingleFunction Safety Relays MSR17RP 3 N.O. 1 N.C. Removable (Screw) 4V AC/DC RN3135 MSR17TP 3 N.O. 1 N.C. Removable (Screw) Auto./Manual 4V AC/DC RN313 MSR16T N.O. None Fixed Auto./Manual 4V AC/DC 5 440RN3117 MSR30RT N.O. Solid State 1 N.O. Solid State Removable Modular Safety Relays MSR10P Base N.C. only MSR0P Input Module MSR310P Base MSR30P Input Module N.O. 1 N.C. and PNP Solid State Removable Auto./Manual or Auto./Manual or 4V DC RN3198 4V DC from the base unit RH3176 Removable 4V DC RH3178 MSR300 Series Output Modules 3 PNP Solid State Removable Auto./Manual PNP Solid State Removable 4V DC RW319 4V DC from the base unit Note: For additional Safety Relays connectivity, see the Safety Relays section (page 58) of this catalog. For additional Safety I/O and Safety PLC connectivity, see the Programmable Safety System section (page 5107) of this catalog. For application and wiring diagrams, see the Safety Applications section (page 101) of this catalog RW318 1 Connection Systems Description 6Pin Micro (M1) 5Pin Micro (M1) Cordset 889RF6ECA Patchcord 889RF6ECRM 889RF5ECRM Distribution Box 898RP68MTA5 Shorting Plug 898RP61MURM TPort NA Replace symbol with ( m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), ( m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Note: For additional information, see the Safety Connection System section (page 71) of this catalog. 315

5 & Safety Tongue Cadet 3 Description Dimensions 1 Approximate Dimensions Flat actuator, not to be used with metal alignment guide 90 actuator, not to be used with metal alignment guide Metal alignment guide with semiflexible actuator Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. # $ ' ( ) ' ( * KA KA KA1030 Replacement Cover 440AA1115 Dust Cover 440KA1718! " # $ % Note: D, 3D and electrical drawings are available on Visit our website:

6 Safety Tongue Trojan T15 Product Selection Type Trojan T15 Trojan T15 GD Safety Auxiliary Action Actuator Type M0 N.C. 1 N.C. 1 N.O. N.C. 1 N.C. 1 N.O. M0 Conduit 1/ inch NPT Adaptor Distribution Box 4Pin Micro (M1) Connector ArmorBlock Guard I/O 5Pin Micro (M1) 440KT KT KT KVNNSPS Fully 440KT KT KT KVNNBPS 440KT KT KT KT KT11386 Fully 440KT KT KT KT KT11388 GD 440KT KT KT KVNNGPSNG Fully 440KT KT KT KT KT11391 GD 440KT KT KT1139 Fully 440KT KT KT KT KT For connector ratings see page 39. Recommended s Description Safety Outputs Auxiliary Outputs Terminals Reset Type Supply Cat. Page No. SingleFunction Safety Relays for N.C. Switch MSR17RP 3 N.O. 1 N.C. Removable (Screw) 4V AC/DC RN3135 MSR17TP 3 N.O. 1 N.C. Removable (Screw) Auto./Manual 4V AC/DC RN313 MSR30RT N.O. Solid State 1 N.O. Solid State Removable SingleFunction Safety Relays for 1 N.C. & 1 N.O. Switch Auto./Manual or 4V DC RN3198 MSR9T N.O. 1 N.C. Fixed Auto./Manual 4V AC/DC RF307 MSR33RT N.O. Solid State 1 N.O. Removable Modular Safety Relays MSR10P Base N.C. only MSR0P Input Module MSR310P Base MSR30P Input Module N.O. 1 N.C. and PNP Solid State Removable Auto. or Monitored Manual Auto./Manual or 4V DC SELV RF300 4V DC from the base unit RH3176 Removable 4V DC RH3178 MSR300 Series Output Modules 3 PNP Solid State Removable Auto./Manual PNP Solid State Removable 4V DC RW319 4V DC from the base unit Note: For additional Safety Relays connectivity, see the Safety Relays section (page 58) of this catalog. For additional Safety I/O and Safety PLC connectivity, see the Programmable Safety System section (page 5107) of this catalog. For application and wiring diagrams, see the Safety Applications section (page 101) of this catalog RW318 Connection Systems Description Connection to Distribution Box 4Pin Micro (M1) Connection to ArmorBlock Guard I/O 5Pin Micro (M1) N.C. 1 N.C. & 1 N.O. N.C. Cordset 889DF4AC 889DF4AC Patchcord 889DF4ACDM 889DF4ACDM 889DF5ACDM Distribution Box 898D4 LTDM4 898DP4 KTDM4 Shorting Plug 898D41LUDM 898D41KUDM TPort 898D43LYD4 898D43KYD4 Replace symbol with ( m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), ( m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 4 or 8 for number of ports. Note: For additional information, see the Safety Connection System section (page 71) of this catalog. 319

7 , ,,1,1, Safety Tongue Trojan T15 Description To Be Used With: Dimensions 1 actuator Trojan T15 Models Only KA1138 GD standard actuator Trojan GD Models Only GA7011 GD flat actuator Trojan GD Models Only 440KA Alignment guide with semiflexible actuator Discard Alignment Guide for GD Models 440KA11144 Alignment guide with fullyflexible actuator Discard Alignment Guide for GD Models KA7010 Sliding bolt actuator Trojan GD Models Only GA7163 Catch and Retainer Kit Trojan T15 Models Only KA11094 Replacement Cover All Models 440AA11499 Dust Cover All Models 440KA17180 Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. 3, / 3 / 61. /, / 8 9 : ; ; < = >8? ; > ; < = >8 9 : 8 = A B 8 Note: D, 3D and electrical drawings are available on 01,. / 3 / D F < = > >G < D D? G D < D > F D? E ; < 8 > H ;? 3 /,1,. / 3 / 3 / / 8 = > ; < = > C D? D ; > E ; < = > F 8? 30 Visit our website:

8 Safety Tongue Trojan 5 & 6 Product Selection Type Trojan 5 Trojan 5 GD Type Trojan 6 Trojan 6 GD Safety Auxiliary Action Actuator Type M0 N.C. 1 N.O. M0 Conduit Connector Safety Auxiliary Action Actuator Type M0 1/ inch NPT Adaptor 8Pin Micro (M1) 3 N.C. 1 N.O. N.C. N.O. 3 N.C. 1 N.O. N.C. N.O. Gold s MBB MBB 440KT KT KT KT KT KT KT KT KW1BNPH MBB 440KT KT KW1MNPH GD 440KT KT KT KT11444 MBB 440KT KT11457 M0 Conduit 1/ inch NPT Adaptor Distribution Box 6Pin Micro (M1) Connector GD 440KT KT1145 ArmorBlock Guard I/O 5Pin Micro (M1) 440KT KT KT1105 Guide/Semi Guide/Fully 440KT KT KT KT KT KT KTNNBPS 440KT KT KT KT KT KT114 Guide/Semi Guide/Fully 440KT KT KT KT KT KT KT KT KT11365 GD 440KT KT KT KTNNGPSNG Guide/Semi Guide/Fully 440KT KT KT KT KT KT KT KT116 GD 440KT KT KT11369 Guide/Semi Guide/Fully 440KT KT KT KT KT KT KT KT1137 Trojan 5 30 N 440KT KT KT1149 For connector ratings see page 39. With a 5pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 37 for wiring details. 440KT KT KW1BNPHNG MBB 440KT KT KW1MNPHNG For connector ratings see page 39. With an 8pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 37 for wiring details. 1 33

9 Safety Tongue Trojan 5 & 6 Description To Be Used With: Dimensions actuator Trojan T5 and T6 Models Only KA11095 GD standard actuator GD Models Only GA7011 GD flat actuator GD Models Only KA Alignment guide with semiflexible actuator Discard Alignment Guide for GD Models KA11144 Alignment guide with fullyflexible actuator Discard Alignment Guide for GD Models KA7010 Sliding bolt actuator GD Models Only GA7163 Catch and Retainer Kit Trojan T5 and T6 Models Only KA11094 Replacement Cover Trojan T5 Models Only Trojan T5 GD Trojan T6 Models Only Trojan T6 GD 440AA AA AA AA11498 Dust Cover All Models 440KA

10 Safety Tongue MTGD Product Selection Red Body Type MTGD MTGD Latch Release Actuator Safety Auxiliary Action Type M0 1/ in NPT 1Pin M3 3 N.C. 1 N.O. N.C. N.O. 3 N.C. 1 N.O. N.C. N.O. Conduit Connector 8Pin Micro (M1) ArmorBlock Guard I/O 5Pin Micro (M1) 440KMT KMT KMT55094 GD Fully ible 440KMT KMT KMT KMT KMT KMT55096 MBB 440KMT KMT KMT KMT KMT KMT KM1BNDH GD Fully ible 440KMT KMT KMT KMT KMT KMT55099 MBB 440KMT KMT KMT55101 Snap Acting 440KMANDT 440KMANDL 440KM1ANDH 440KMNNNDS Extende d Flat GD Fully ible 440KMAEDM 440KMAEDT 440KMASDM 440KMASDT 440KMABDM 440KMABDT 440KMT KMT KMT5504 GD Fully ible 440KMT KMT KMT KMT KMT KMT55103 MBB 440KMT KMT KMT KMT KMT KMT KM1BNDHN5 440KMNNNDSN5 GD Fully ible 440KMT KMT KMT KMT KMT KMT5505 MBB 440KMT KMT KMT KM1MNDHN5 1 For connector ratings see page 39. With a 5pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 33 for wiring details. With an 8pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 33 for wiring details. Yellow Body Type Safety Auxiliary Action Actuator Type 1/ in NPT 1Pin M3 MTGD N.C. N.O. Snap Acting Conduit Connector 5Pin Micro (M1) 440KMANYT Extended Flat 440KMAEYT 440KMAEYL 440KMNAEYS N.C. N.O. MBB 440KMMNYTN5 440KMNNNYSN5 For connector ratings see page 39. With a 5pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 33 for wiring details. With an 8pin micro (M1) connector, not all contacts are connected. See Typical Wiring Diagram on page 33 for wiring details. 39

11 Safety Tongue MTGD Description Dimensions GD standard actuator GA7011 GD flat actuator KA1111 Fully flex actuator GA Sliding bolt actuator GA7163 Extended flat actuator KA17116 Dust Cover 440KA17180 Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. MTGD Latch Release 4 x M5 MTGD 11.5 (0.45) 60 (.36) 5 (0.) 8.75 (0.34) 40 (1.57) 30 (1.18) 119 (4.68) (4.66) (0.86) 40 (1.57) 30 (1.18) 0.5 (0.81) 38 (1.5) 10.5 (0.41) 60 (.36) 10.4 (4.03) 4.6 (0.97) 10.5 (0.41) 43 (1.69) (4.59) 30.8 (1.1) 40.7 (1.6) 30.8 (1.1) 9. (0.36) 5 (0.) 43 (1.69) 51 (.0) 67.6 (.66) 74.6 (.93) 30.8 (1.1) 9. (0.36) 5 (0.) 1 x M0, 1 x 1/" NPT 0.5 (0.81) 8.75 (0.34) 1 x M0, 1 x 1/" NPT 0.5 (0.81) 8.75 (0.34) Note: D, 3D and electrical drawings are available on 331

12 I Safety Guard Locking 440GMT 1 Connection Systems Cordset Patchcord Replace symbol with ( m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), ( m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 0M3, (0.3 m), 0M6 (0.6 m), 1 (1 m), ( m) or 3 (3 m) for standard lengths. Note: For additional information, see page 71. Description 8Pin Micro 1Pin M3 Description Dimensions GD standard actuator GD flat actuator Fully flex actuator Sliding bolt actuator Extended flat actuator Replacement Cover, No LED, No Override Key Replacement Cover, LED, Override Key Emergency Override Key (See Warning below.) DF8AB 889MF1AH 889DF8ABDM 889MF1AHMU 440GA KA GA GA KA GMT GMT GA3606 Dust Cover 440KA17180 WARNING: Do not attach the Emergency Override Key to the 440GMT switch. Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. Note: D, 3D and electrical drawings are available on Visit our website:

13 I Safety Guard Locking TLSGD Description Dimensions GD standard actuator GA7011 GD flat actuator KA1111 Extended flat actuator KA Fully flex actuator GA7143 Sliding bolt actuator not to be used with the Escape Release GA7163 Cover for TLS1 with external override key for series D and earlier 440GA7140 Cover for TLS3 with external override key for series D and earlier 440GA714 Cover for TLS1 with override key attached for series D and earlier 440GA707 Cover for TLS3 with override key attached for series D and earlier 440GA708 Cover for TLS1 with external override key for series E and later 440GA7371 Cover for TLS3 with external override key for series E and later 440GA737 Cover for TLS1 with override key attached for series E and later 440GA7373 Cover for TLS3 with override key attached for series E and later 440GA7374 Emergency Override Key (See Warning below.) ible Release 1 m (3.8 ft) Cable 440GA GA7356 ible Release 3 m (9.84 ft) Cable GA7357 Dust Cover 440KA17183 Sliding Bolt KAMDS Mounting Plate KAMDSSMPB WARNING: Do not attach the Emergency Override Key to the TLSGD switch. 343