EAO Your Expert Partner for Human Machine Interfaces. EAO Product Information. Series 14

Transcription

1 EAO Your Expert Partner for Human Machine nterfaces EAO Product nformation Series

2

3 Switches and ndicators

4 Contents Description... Product Assembly... 4 Devices raised mounting... 6 Devices flush mounting... 1 Accessories Technical Data Typical Applications... Application guidelines... 1 Marking... 2 Drawings... 6 ndex

5 Description Specimen order Product nformation lluminated pushbutton : General notes The Series illuminated pushbuttons combine the robust actuators of the Series 4 with choice of either snapaction switching elements with gold plated silver contacts for one changeover only. These pushbuttons have an P 67 proof front (temporary emerson) and can be immersed to a depth of one metre. The range includes pushbuttons, keylock switches and selector switches. Anodized aluminium parts can have visible variations due productiontechnical reasons. lluminiated pushbutton actuator, 29 mm dia., snapaction switching element, 1NC + 1 NO, momentary action, soldering terminal Essential accessories : Lens plastic red Marking plate white translucent Front ring aluminium natural SingleLED, T5.5, 12 VAC/DC, white Mounting Mounted from the front through either 22.5 mm dia cut out for raised or.5 mm dia for flush. The pushbuttons are secured to the panel by means of a fixing ring/ nut and prevented from twisting by two srews. To ensure correct positioning of the pushbuttons we can provide a positioning insert if required. The Low Level switching elements with universal terminals allow them to PCB mounted. These terminals are also suitable for dip soldering. A plugin base is available, which when soldered to the board allows the switch to be easily pluggedin. We reserve the right to modify technical data All dimensions in mm Lenses Lenses of transparent plastic or aluminium are available in various standard colours. Marking For further information about engraving, hot stamping and film inserts see part Marking. llumination The T5.5 incandescent (filament) lamp (6, 12, 24, 28,, 6, 48 V) ensures perfect illumination of the lenses, which are supplied in various colours. T5.5 SingleChip LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Do not solder the terminals directly, because of the high surface temperature. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. Position indication The status of a maintained action switch can be determinded by the position of the lens. Keylock switch Single locks (2 positions). There are 1 different locks with standard numbers f the lock number is not specified, we will supply standard number 11. Additional lock numbers are available on request. Two keys are supplied with each keylock switch. Spare keys for standard locks may be ordered by quoting TypNr. 987 (please state the lock number).

6 Product Assembly lluminated pushbutton, raised mounting Front ring 2 Lens Marking plate 4 LED 5 Actuator housing with switching element 6 Front plate 7 Fixing nut lluminated pushbutton, flush mounting Front bezel set, flush mounting 2 Lens Marking plate 4 LED 5 Actuator housing with switching element 6 Front panel 7 Pressure ring 8 Fixing nut

7 Product Assembly Keylock switch, raised mounting 1 1 Front ring 2 Actuator housing with switching element Front plate 4 Fixing nut 2 4 Selector switch, flush mounting 1 1 Front ring 2 Actuator housing with switching element Front plate 4 Antitwist ring 5 Pressure ring 6 Fixing nut

8 Devices raised mounting ndicator actuator full face illumination Essential Accessories: d Lens cap page 18 d Marking cap for Lens cap page 19 d SingleLED page 24 Ø 29 mm TypNr. e ndicator actuator full face illumination P 67 1 D UT D UT S S UT Front protection Diode (1N 47) Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Diode (1N 47): D = Diode, = without Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 ndicator actuator front illumination Essential Accessories: d Front ring page 19 d Lens plastic page 17 d Marking plate for Lens plastic and metal page 18 d SingleLED page 24 Ø 29 mm TypNr. e ndicator actuator front illumination P 67 S S UT Front protection Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm), UT = Universal terminal Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 6

9 Devices raised mounting Buzzer Buzzer Operation voltage 24 VDC Front protection Ø 29 mm Front cap TypNr. e P 65 Brass nickelplated S Plastic black S Terminals Mounting dimensions Technical drawing Circuit drawing Further information in the Technical Data and Typical Applications Terminals: S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 7

10 Devices raised mounting lluminated actuator pushbutton Essential Accessories: d Front ring page 19 d Lens plastic page 17 d Marking plate for Lens plastic and metal page 18 d SingleLED page 24 Front protection Switching system Ø 29 mm Contacts TypNr. e lluminated actuator pushbutton P 67 LL 1 NC MA UT M UT NC + 1 NO MA UT M UT NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO 1 D MA UT M UT D MA UT M UT MA S S M S S NC + 2 NO 1 D MA UT M UT D MA UT M UT MA S M S NC + NO MA S M S NC + 4 NO MA S M S Diode (1N 47) Switching action Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 47): = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 8

11 Devices raised mounting Mushroomhead actuator pushbutton Essential Accessories: d Front ring page 19 d Marking plate for Mushroomhead cap page 18 d Mushroomhead cap page 18 Front protection Ø 4 mm Contacts TypNr. e Mushroomhead actuator pushbutton P 67 LL 1 NC MA UT M UT NC + 1 NO MA UT M UT NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO MA S S M S S NC + 2 NO MA S M S NC + NO MA S M S NC + 4 NO MA S M S Switching system Switching action Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 9

12 Devices raised mounting lluminated mushroomhead actuator pushbutton Essential Accessories: d Front ring page 19 d Marking plate for Mushroomhead cap page 18 d Mushroomhead cap illuminated page 18 d SingleLED page 24 Front protection Switching system Ø 4 mm Contacts TypNr. e lluminated mushroomhead actuator pushbutton P 67 LL 1 NC MA UT M UT NC + 1 NO MA UT M UT NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO 1 D MA UT M UT D MA UT M UT MA S S M S S NC + 2 NO 1 D MA UT M UT D MA UT M UT MA S M S NC + NO MA S M S NC + 4 NO MA S M S Diode (1N 47) Switching action Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 47): = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 1

13 Devices raised mounting Keylock switch 2 positions Keylock switch 2 positions Position A : Basic position Position C : Maintained action Standard lock 11, Front : Plastic black Position A : Basic position Position C : Momentary action Standard lock 11 Front : Plastic black Front protection Switching system Keylock switches are supplied with 2 keys. Other lock numbers on request Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 Switching action Ø 29 mm Front ring Contacts TypNr. e P 65 Aluminium natural LL 1 NC + 1 NO MA UT A 415.6K C 418.6K C + A 412.6K NO MA UT A 4.6K C 417.6K C + A 411.6K SA 1 NC + 1 NO MA S A 25.25K C 5.25K C + A 15.25K S1 A 25.22K C 5.22K C + A 15.22K NC + 2 NO MA S A 26.25K C 6.25K C + A 16.25K NC + NO MA S A 27.25K C 7.25K C + A 17.25K NC + 4 NO MA S A 28.25K C 8.25K C + A 18.25K P 65 Aluminium natural LL 1 NC + 1 NO M UT A 48.6K NO M UT A 47.6K SA 1 NC + 1 NO M S A 1.25K S1 A 1.22K NC + 2 NO M S A 2.25K NC + NO M S A.25K NC + 4 NO M S A 4.25K Terminals Key remove Component layout Mounting dimensions Technical drawing Circuit drawing 11

14 Devices raised mounting Selector switch 2 positions nonilluminative Selector switch 2 positions Position A : Basic position Front protection Front ring P 67 Aluminium natural Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 Switching system Switching action Ø 29 mm Lever Contacts TypNr. e Plastic black long LL 1 NC + 1 NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO MA S S M S S NC + 2 NO MA S M S NC + NO MA S M S NC + 4 NO MA S M S Plastic black short LL 1 NC + 1 NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO MA S S M S S NC + 2 NO MA S M S NC + NO MA S M S NC + 4 NO MA S M S Terminals Component layout Mounting dimensions Technical drawing Circuit drawing 12

15 Devices flush mounting ndicator actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 2 d Lens plastic page 17 d Marking plate for Lens plastic and metal page 18 d SingleLED page 24 Ø 5 mm TypNr. e ndicator actuator, flush mounting P 67 S S UT Front protection Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm), UT = Universal terminal Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 Buzzer, flush mounting Buzzer, flush mounting Operation voltage : 24 VDC Front protection Ø 5 mm Front cap TypNr. e P 4 Aluminium black S Aluminium natural S Terminals Mounting dimensions Technical drawing Circuit drawing Further information in the Technical Data and Typical Applications Terminals: S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 1

16 Devices flush mounting lluminated pushbutton actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 2 d Lens plastic page 17 d Marking plate for Lens plastic and metal page 18 d SingleLED page 24 Front protection Switching system Ø 5 mm Contacts TypNr. e lluminated pushbutton actuator, flush mounting P 67 LL 1 NC MA UT M UT NC + 1 NO MA UT M UT NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO 1 D MA UT M UT D MA UT M UT MA S S M S S NC + 2 NO 1 D MA UT M UT D MA UT M UT MA S M S NC + NO MA S M S NC + 4 NO MA S M S Diode (1N 47) Switching action Terminals Component layout Mounting dimensions Technical drawing Circuit drawing Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 47): = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48

17 Devices flush mounting Keylock switch actuator 2 positions, flush mounting Essential Accessories: d Antitwist ring, flush mounting page 25 d Front bezel set, flush mounting page 2 Keylock switch actuator 2 positions, flush mounting Position A : Basic position Position C : Maintained action Standard lock 11, Front : Plastic black Position A : Basic position Position C : Momentary action Standard lock 11 Front : Plastic black Front protection Switching system Keylock switches are supplied with 2 keys. Other lock numbers on request Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 Switching action Terminals Key remove Component layout Mounting dimensions Technical drawing Ø 5 mm Contacts TypNr. e P 65 LL 1 NC + 1 NO MA UT A 415.6K C 418.6K C + A 412.6K NO MA UT A 4.6K C 417.6K C + A 411.6K SA 1 NC + 1 NO MA S A 25.25K C 5.25K C + A 15.25K S1 A 25.22K C 5.22K C + A 15.22K NC + 2 NO MA S A 26.25K C 6.25K C + A 16.25K NC + NO MA S A 27.25K C 7.25K C + A 17.25K NC + 4 NO MA S A 28.25K C 8.25K C + A 18.25K P 65 LL 1 NC + 1 NO M UT A 48.6K NO M UT A 47.6K SA 1 NC + 1 NO M S A 1.25K S1 A 1.22K NC + 2 NO M S A 2.25K NC + NO M S A.25K NC + 4 NO M S A 4.25K Circuit drawing 15

18 Devices flush mounting Selector switch actuator 2 positions, flush mounting Essential Accessories: d Antitwist ring, flush mounting page 25 d Front bezel set, flush mounting page 2 Selector switch actuator 2 positions, flush mounting Position A : Basic position Front protection Switching system: LL = Low level switching element, SA = Snapaction switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x.5 mm) Component layout from page 6, Mounting dimensions from page 7, Technical drawing from page 8, Circuit drawing from page 48 Switching system Switching action Ø 5 mm Lever Contacts TypNr. e P 67 Plastic black short LL 1 NC + 1 NO MA UT M UT NC MA UT M UT NO MA UT M UT SA 1 NC + 1 NO MA S S M S S NC + 2 NO MA S M S NC + NO MA S M S NC + 4 NO MA S M S Terminals Component layout Mounting dimensions Technical drawing Circuit drawing 16

19 Accessories Front Lens plastic To obtain P 67 use Marking plate TypNr X Lens Ø 29 mm TypNr. e Lens plastic black opaque flush blue transparent flush colourless transparent flush green transparent flush red transparent flush yellow transparent flush Lens raised, plastic To obtain P 67 use Marking plate TypNr X Lens Ø 29 mm TypNr. e Lens raised, plastic colourless transparent flush green transparent flush red transparent flush yellow transparent flush Lens metal with spot To obtain P 67 use Marking plate TypNr X Lens Ø 29 mm TypNr. e Lens metal with spot Aluminium black flush Aluminium blue flush Aluminium gold flush Aluminium natural flush Aluminium olivegreen flush Aluminium red flush Stainless steel natural flush Lens metal To obtain P 67 use Marking plate TypNr Lens Ø 29 mm TypNr. e Lens metal Aluminium black flush Aluminium blue flush Aluminium gold flush Aluminium natural flush Aluminium olivegreen flush Aluminium red flush Stainless steel natural flush

20 Accessories Lens cap To obtain P 67 use Marking plate TypNr X Lens Ø 29 mm TypNr. e Lens cap Plastic blue transparent Plastic colourless transparent Plastic green transparent Plastic red transparent Plastic yellow transparent Mushroomhead cap To obtain P 67 use Marking plate TypNr Mushroom had cap Ø 4 mm TypNr. e Mushroomhead cap Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque Mushroomhead cap illuminated To obtain P 67 use Marking plate TypNr Mushroom had cap Ø 4 mm TypNr. e Mushroomhead cap illuminated Plastic blue transparent Plastic colourless transparent Plastic green transparent Plastic red transparent Plastic yellow transparent Marking plate for Lens plastic and metal Marking plate for Lens plastic and metal LED Marking plate TypNr. e Plastic colourless transparent ribbed LED and Filament lamp Plastic white translucent nonilluminative Plastic black opaque Marking plate for Mushroomhead cap Marking plate TypNr. e Marking plate for Mushroomhead cap Plastic white translucent

21 Accessories Marking cap for Lens raised, plastic Marking cap for Lens raised, plastic LED Marking cap TypNr. e Plastic colourless transparent ribbed LED and Filament lamp Plastic white translucent Marking cap for Lens cap Marking cap for Lens cap LED Marking cap TypNr. e Plastic colourless transparent ribbed LED and Filament lamp Plastic white translucent Front ring Ø 29 mm TypNr. e Front ring A Front bezel set for Mushroomhead pushbutton Front Bezel Ø 5 mm TypNr. e Front bezel set for Mushroomhead pushbutton Aluminium black Aluminium natural Mounting dimensions from page 7, Technical drawing from page 8 Mounting dimensions Technical drawing 19

22 Accessories Front bezel set, flush mounting Front bezel Ø 5 mm TypNr. e Front bezel set, flush mounting Aluminium black Aluminium natural Stainless steel natural Mounting dimensions from page 7 Mounting dimensions Legend frame adhesive, Aluminium black Legend frame x 5 mm for raised mounting Technical drawing from page 8 Technical drawing TypNr. e x 57.5 mm for flush mounting Legend plate insert for Legend frame and Legend plate insert.5 x 2.5 mm, adhesive, Aluminium black TypNr. e x 2.5 mm, adhesive, Aluminium natural Protective cover, raised mounting Mounting hole size 22.5 mm dia. Protective cover, raised mounting hinged, transparent, with means for sealing, for Pushbutton Protection cover only for selector switches in basic position A applicable. Technical drawing from page 8 Technical drawing TypNr. e hinged, transparent, with means for sealing, for Selector switch hinged, transparent, with means for sealing, with spring fitted, for Pushbutton

23 Accessories Protective cover, flush mounting Mounting hole size.5 mm dia. Protective cover, flush mounting hinged, Aluminium natural, with means for sealing, for Pushbutton and Selector switch short lever hinged, Aluminium natural, with means for sealing, spring fitted, for Pushbutton and Selector switch short lever Technical drawing from page 8 Technical drawing TypNr. e hinged, Aluminium natural, with window, spring fitted, for Pushbutton Front protective cap for ndicator and lluminated pushbutton for protection P 68 Front protective cap only together with Lenses X, X and Front rings 74.6.X Front protective cap TypNr. e Silicone colourless transparent Front protective ring for lluminated pushbutton with front illumination (P 67) Front protective ring with transparent Pebax membrane, temperature resistance 4 C C with transparent silicone membrane (extent resistant to sea water), temperature resistance 4 C C Ø 29 mm Front protective ring TypNr. e Aluminium natural /A.5 Aluminium natural Chromed brass Front protective ring to be mounted with a torque of 4 Ncm onto actuator. Front bezel with protective membrane, flush mounting for lluminated pushbutton (P 67) Front bezel with protective membrane, flush mounting with transparent silicone membrane Front bezel to be mounted with a torque of 4 Ncm onto actuator. Front bezel Ø 5 mm TypNr. e Aluminium black Aluminium natural with transparent silicone membrane, resistant to sea water Stainless steel natural E. 21

24 Accessories Blind plug Blind plug Size 28 mm dia., for mounting hole 22.5 mm dia. Technical drawing from page 8 Front protection Technical drawing Blind plug TypNr. e Plastic black P Size 6 mm dia., for mounting hole.5 mm dia. Plastic black P Spare key Spare key Standard lock 11 (KABA) TypNr. e Other lock numbers on request > Backside PCB plugin base PCB plugin base 16.4 mm dia. x 9.8 mm for Low level switching element, Pins axial TypNr. e x 12.9 mm x 9.8 mm for Snapaction switching element 2.8 mm, Pins axial x 17.9 x 8.4 mm for Low level switching element, Pins bent at rightangle PCB plugin base Pins rightangle : With the extendable mounting the distance between plugin base and PCB can be varied up to mm. Component layout from page 6 Component layout Flat receptacle Flat receptacle 2. x.5 mm for Universal terminal TypNr. e x.5 mm for Plugin terminal

25 Accessories nsulation sleeve nsulation sleeve Cover Plugin terminals for snapaction switching element 2.8 mm TypNr. e for Flat receptacle for Flat receptacle Terminal cover TypNr. e Terminal cover > llumination Filament lamp Socket Operating voltage/current TypNr. e Filament lamp T VAC/DC, 1 ma VAC/DC, 5 ma VAC/DC, 25 ma VAC/DC, 5 ma VAC/DC, 4 ma VAC/DC, 4 ma VAC/DC, 5 ma VAC/DC, 25 ma VAC/DC, 2 ma

26 Accessories SingleLED Socket Light colour Operating voltage/current TypNr. e SingleLED T5.5 blue 12 VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 4/8 ma VDC, 15 ma green 12 VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 4/8 ma VDC, 15 ma red 12 VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 4/8 ma VDC, 15 ma white diffuse 12 VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 4/8 ma VDC, 15 ma yellow 12 VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 7/ ma VAC/DC, 4/8 ma VDC, 15 ma Note: AC operation through halvewave rectifier possible, slight flickering can occure. Terminal plate empty for fitting with series resistors Terminal plate empty 1 spaces 125 x 6 x 15 mm TypNr. e spaces x 6 x 15 mm spaces 25 x 6 x 15 mm spaces 62.5 x 6 x 15 mm

27 Accessories > Assembling Positioning insert TypNr. e Positioning insert 91.1 Mounting dimensions from page 7 Mounting dimensions Antitwist ring, flush mounting TypNr. e Antitwist ring, flush mounting Reducing ring Devices 22.5 mm dia. in mounting hole size.5 mm dia. Reducing ring Aluminium black You need to install two reduction rings. TypNr. e Aluminium natural Lens plug for round lens, flush mounting Lens plug for round lens, flush mounting for mounting and dismantling of Lens round, flush mounting TypNr. e Lamp remover TypNr. e Lamp remover CAUTON A switching process might be released when replacing the Lamp/LED! 25

28 Accessories Enclosure Grey similar RAL 75; cover leadsealable Enclosure with mounting hole 1 x 22.5 mm dia., with antitwist device Openings for cable gland M16 or M2. Protection class P 66. Technical drawing from page 8 Technical drawing Dimension TypNr. e L 94 mm, W 94 mm, H 81 mm with mounting hole 2 x 22.5 mm dia., with antitwist device L 1 mm, W 94 mm, H 81 mm with mounting hole x 22.5 mm dia., with antitwist device L 18 mm, W 94 mm, H 81 mm with mounting hole 4 x 22.5 mm dia., with antitwist device L 18 mm, W 182 mm, H 11 mm with mounting hole 6 x 22.5 mm dia., with antitwist device L 18 mm, W 182 mm, H 11 mm Cable gland Cable gland M16, Plastic grey with traction relief; protection degree P 68. TypNr. e M2, Plastic grey

29 Technical Data Actuator with snapaction switching element Switching system Selfcleaning, doublebreak, snap action switching system (with contact gap 2 x.5 mm). 1 normally closed or 1 normally open contact per element. Snapaction switching elements with soldering terminals at the sides: up to 4 switching element can be on a pushbutton (max. 4 normally closed and 4 normally open contacts). Snapaction switching element with axial plugin terminals 2.8 mm stackable, only 1 switching element can be on a pushbutton. Electrical characteristics Standards The devices comply with : EN EC Rated voltage 25 VAC/DC as per EN EC Contact resistance New state 5 mω as per DN EC Electrostatic discharge (ESD) Keylock switch 15 kv Material Material of contact Gold plated silver Switch housing Plugin/soldering terminal Diallylphthalate DAP, Polyamide 66, Polysulfone, heatresistant and selfextinguishing Soldering terminal: PA 6.6 Ultramide Actuator housing Polyamide Mechanical characteristics Terminals Snapaction switching element with tinned soldering terminals at the sides: Max. wire diameter 2 wires à 1.2 mm max. wire crosssection of stranded cable 1x 1 mm² Snapaction switching element with axial plugin terminals, which can also be used as soldering terminals: Plugin terminal 2.8 x.5 mm Soldering terminal: Max. wire diameter 2 wires of 1 mm Max. wire crosssection of stranded cable 2 x.75 mm² or 1 x 1. mm² Rated current 5 A Conventional free air thermal current th 5 A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. Switch rating 25 VAC, 5 A (cosφ 1) 25 VAC, A (cosφ,) Switch rating AC (cosφ,7) Voltage 125 VAC 25 VAC Current A 2 A Switch rating DC (inductive) L:R = ms Voltage 24 VDC 6 VDC 11 VDC 22 VDC Current 2 A.7 A.2 A.1 A Electric strength VAC, 5 Hz, 1 min. between all terminals and earth, as per EN EC solation resistance >7 MΩ between the opend contats at 5 VDC, as per EN EC (reinforced insulation) Protection class Actuating torque Measured at the key or lever of the keylock or selector switch 2.5 Ncm Ncm, depending on the number of switching elements Actuating force Maintain 5 N N Momentary.2 N... 6 N depending on the number of switching elements Actuating travel lluminated pushbutton: mm Switch actuator 2 positions: Momentary action 1 x ca. 42 deflection momentary action Maintained action 1 x ca. 9 deflection maintained action Rebound time 5ms Mechanical lifetime Momentary action 2 million Cycles of operation Maintained action 1 million Cycles of operation Environmental conditions Storage temperature 4 C C Service temperature 25 C C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Protection degree as per EN EC 6529 front side P 67 Shock resistance (semisinusoidal) max. 15 m/s², pulse width 11 ms, axis, as per EN EC Vibration resistance (sinusoidal) max. 1 m/s² at 1 Hz... 5 Hz, as per EN EC

30 Technical Data Climate resistance Damp heat state as per EN EC 6682 Damp heat cyclic as per EN EC Approvals > Approbations CB (EC 6158) CSA ENEC (EN 6158) Germanischer Lloyd UL Declaration of conformity CE Actuator with low level switching element Switching system This low level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μa/μv up to 1 ma/42 VAC/ DC. Singlebreak momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible. Special features are the long life, extremely short rebound time and stable contact resistance. Material Material of contact Gold plated Switch housing Polysulfone, heatresistant and selfextinguishing Actuator housing Polyamide Mechanical characteristics Terminals The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plugin terminals. For these terminals we can also supply a plugin base which, when soldered on to the board, enables the switch to be plugged in. Soldering terminal: Max. wire diameter 2 wires of 1 mm Max. wire crosssection of stranded cable 2 x.75 mm² Plugin terminal: 2. x.5 mm. Actuating torque Measured at the key or lever of the keylock or selector switch 2.5 Ncm Ncm, depending on the number of switching elements Actuating force... 4 N, depending on the number of switching elements Rebound time typical <1 μs Mechanical lifetime Momentary action 5 million cycles of operation Maintained action 1 million cycles of operation Electrical characteristics Contact resistance New state 5 mω as per DN EC Electrostatic discharge (ESD) Keylock switch 15 kv Switch rating 1 μa, 1 μv to 1 ma at 42 VAC/VDC Electric strength VAC, 5 Hz, 1 min. between all terminals and earth, as per EN EC Protection class Environmental conditions > Storage temperature 4 C C Service temperature 25 C C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Protection degree as per EN EC 6529 front side P 67 Shock resistance (semisinusoidal) max. 15 m/s², pulse width 11 ms, axis, as per EN EC Buzzer Buzzer system System Piezo disc Material Alarm buzzer case Polyamide Front cap Plastic Polyamide Metal Nickelplated brass (seawater proof) Mechanical characteristics Actuating travel lluminated pushbutton : mm Switch actuator 2 positions: Momentary action 1 x ca. 42 deflection momentary action Maintained action 1 x ca. 9 deflection maintained action Terminals Plugin terminal 2.8 x.5 mm Electrical characteristics Frequency (tone) approx. 2.8 khz continuous tone only 28

31 Technical Data Sound pressure 95 db (A) ±8 db at a distance of.1 m Operation Voltage/Current Operation Voltage 24 VDC ±1 % Operation Current 25 ma Environmental conditions Storage temperature 4 C C Operating temperature 25 C C Protection degree as per EN EC 6529, frontside P 4, devices flush mounting P 65, devices raised mounting Approvals Declaration of conformity CE 29

32 Typical Applications Diode element When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space.

33 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a freewheeling diode connected in parallel. This freewheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this freewheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The freewheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the freewheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the freewheeling diode must be connected as close as possible to the inductive load! Switching with inductive load Fig. 1 Counter emf over load without freewheeling diode Fig. 2 Switch ON OFF VDC + _ Freewheeling diode nductive load Sveral hundred to several thousend volts e = L di dt 1

34 Marking General notes 1. Engraving n addition to the most commonly used world languages, in DN 51 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. The lenses are filled with black or white colour. Standard height of letters is mm. f the height is not specified, we will supply mm engraved letters. 2. Hot stamping Standard legends and SO symbols are hot stamped. For larger series it is worth considering markings by means of hot stamping. We will pleased to advise you. > All dimensions in mm Engraving marking cap for ndicator round, full face illumination Height of letters Number of lines Number of (target value) letters per line Line spacing h b1 b2 b d The gap between 2 words results in each case a letter less. > All dimensions in mm Engraving marking cap for ndicator and illuminated Pushbutton round, front illumination Height of letters Number of lines Number of (target value) letters per line Line spacing h b1 b2 b d The gap between 2 words results in each case a letter less. > 2

35 Marking All dimensions in mm Engraving legend plates Dimension Devices mounting style Height of letters h Number of lines Number of (target value) letters per line x 5 round, raised 2 12 B B B1 5 x 57.5 round, flush 2 12 B B B2 mage B1 B2 Ø25 Ø h 5 The gap between 2 words results in each case a letter less. > Height of letters 6 mm Standard texts for marking plates and marking caps for ndicator and lluminated Pushbutton

36 Marking > Symbols for marking plates and marking caps for ndicator and lluminated Pushbutton > 4

37 Marking Continued from previous page 5

38 Drawings Component layout 1 PCB plugin base page 22 Extendable mounting pins b 42 1 a 4 Switch 1 b a Drilling plan (conductor side) Ø1. all holes x ndicator actuator full face illumination page 6 ndicator actuator front illumination page 6 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 Keylock switch 2 positions page 11 Selector switch 2 positions page 12 ndicator actuator, flush mounting page 1 lluminated pushbutton actuator, flush mounting page Keylock switch actuator 2 positions, flush mounting page 15 Selector switch actuator 2 positions, flush mounting page 16 Terminals (rearside) PCB layout (conductor side) Ø1. all holes.81 1 a b PCB plugin base page Ø1. all holes Ø2.1 hole for central mounting with M2 screw, if desired

39 Drawings 4 PCB plugin base page Ø2.1 hole for central mounting with M2 screw, if desired Ø all holes Mounting dimensions 1 ndicator actuator, flush mounting page 1 Buzzer, flush mounting page 1 lluminated pushbutton actuator, flush mounting page Keylock switch actuator 2 positions, flush mounting page 15 Selector switch actuator 2 positions, flush mounting page 16 Front bezel set, flush mounting page 2 5 min min. Hole spacing 7 mm min. by using blind plug Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 min min. 42 Positioning insert page 25 R.8 max. min min. 7

40 Drawings 4 Front bezel set for Mushroomhead pushbutton page 19 5 min min. 5 ndicator actuator full face illumination page 6 ndicator actuator front illumination page 6 Buzzer page 7 lluminated actuator pushbutton page 8 Keylock switch 2 positions page 11 Selector switch 2 positions page 12 for devices without antitwist device for devices with antitwist device (rotary) (recommended for keylock switch) for devices selector switch long lever min. min min min. min. 42 min. Hole spacing 1 mm min. by using blind plug Technical drawing 1 Buzzer page x

41 Drawings 2 Blind plug page 22 Blind plug page Ø Protective cover, raised mounting page 2 Front panel thickness reduces by.5 mm to max. 4.5 mm 5 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max..5 mm 6 Protective cover, raised mounting page 2 Front panel thickness reduces by.5 mm to max. 4.5 mm 9

42 Drawings 7 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max..5 mm 8 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max..5 mm 9 Legend frame page Ø Legend frame page Ø

43 Drawings 11 Enclosure page Enclosure page

44 Drawings 1 Enclosure page Enclosure page

45 Drawings 15 Enclosure page Buzzer, flush mounting page x.5 5 4

46 Drawings 17 ndicator actuator full face illumination page x.5 Soldering terminal Soldering terminal (also pluggable) Universal terminal Universal terminal + diodes L1 U U+D L L1 U U+D D, 2D L 18 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page Soldering terminal Soldering terminal (also pluggable) Universal terminal Universal terminal + diode L L1 2.8x.5 U U+D L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO 1NC+1NO+D 2NC+2NO+D NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5 U+D ndicator actuator front illumination page x.5 Soldering terminal Soldering terminal (also pluggable) Unversal terminal L1 U L L1 U L 44

47 Drawings 2 lluminated actuator pushbutton page 8 29 Soldering terminal Soldering terminal (also pluggable) Universal terminal Universal terminal + diode L L1 2.8x.5 U U+D L L1 U U+D 1NC+1NO 2NC+2NO NC+NO 4NC+4NO NC+1NO+D 2NC+2NO+D NC, 1NO, 1NC+1NO, 2NC, 2NO Keylock switch 2 positions page L1 2.8x.5 U Soldering terminal Soldering terminal (also pluggable) Unversal terminal L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO NC, 1NO, 1NC+1NO, 2NC, 2NO L 22 Selector switch 2 positions page L1 2.8x.5 U Soldering terminal Soldering terminal (also pluggable) Unversal terminal L L1 U 1NC+1NO NC+2NO NC+NO 4NC+4NO NC, 1NO, 1NC+1NO, 2NC, 2NO L 45

48 Drawings 2 Selector switch 2 positions page L1 2.8x.5 U Soldering terminal Soldering terminal (also pluggable) Universal terminal L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO NC, 1NO, 1NC+1NO, 2NC, 2NO L 24 ndicator actuator, flush mounting page Ø5 2.8x.5 Soldering terminal Soldering terminal (also pluggable) Universal terminal L L1 U L1 U L 25 lluminated pushbutton actuator, flush mounting page 5 Soldering terminal Soldering terminal (also pluggable) Universal terminal Universal terminal + diode Ø5 L1 2.8x.5 U U+D L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO 1NC+1NO+D 2NC+2NO+D NC, 1NO, 1NC+1NO, 2NC, 2NO 55,5 U+D L 46

49 Drawings 26 Keylock switch actuator 2 positions, flush mounting page Soldering terminal Soldering terminal (also pluggable) Universal terminal Ø5 L1 2.8x.5 U L L1 U 1NC+1NO NC+2NO NC+NO 4NC+4NO NC+1NO, 2NO L 27 Selector switch actuator 2 positions, flush mounting page Soldering terminal Soldering terminal (also pluggable) Universal terminal Ø5 L1 2.8x.5 U L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO NC+1NO, 2NC, 2NO L 28 Front bezel set for Mushroomhead pushbutton page Soldering terminal Soldering terminal (also pluggable) Universal terminal Universal terminal + diode Ø5 L1 2.8x.5 U U+D L L1 U 1NC+1NO 2NC+2NO NC+NO 4NC+4NO 1NC+1NO+D 2NC+2NO+D NC, 1NO, 1NC+1NO, 2NC, 2NO 55,5 U+D L 47

50 Drawings Circuit drawing 1 Buzzer page 7 Buzzer, flush mounting page 1 x1+ x2 2 ndicator actuator full face illumination page 6 ndicator actuator front illumination page 6 ndicator actuator, flush mounting page 1 a(x1) b+(x2) ndicator actuator full face illumination page 6 ndicator actuator front illumination page 6 ndicator actuator, flush mounting page 1 4 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page x1 V x2+ 5 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page x1 x2+ 6 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 a (+) b+ 4() 7 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 a (+) 1() b+ 4() 2(+) 48

51 Drawings 8 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 x1 x2+ 9 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a (+) b+ 4() 1 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a (+) 1() b+ 4() 2(+) 11 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 x1 x2+ 12 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a 2 b+ 1 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a 2 4 b+ lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a 2 b+ 49

52 Drawings 15 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a b+ 16 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a b+ 17 Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page V 21 Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page

53 Drawings 22 Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page V 28 Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page

54 Drawings Selector switch 2 positions page 12 Selector switch actuator 2 positions, flush mounting page lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page x1 V x2+ 2 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page x1 x2+ lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 a (+) b+ 4() 4 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 a (+) 1() b+ 4() 2(+) 5 lluminated actuator pushbutton page 8 Mushroomhead actuator pushbutton page 9 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 1 x1 x2+ 6 lluminated actuator pushbutton page 8 lluminated mushroomhead actuator pushbutton page 1 lluminated pushbutton actuator, flush mounting page 1 a (+) b+ 4() 52