TRAY CABLES FOR INDUSTRIAL PLANT INSTALLATIONS THE RIGHT SOLUTION FOR EVERY APPLICATION

Transcription

1 TRAY ABLES FOR INDUSTRIAL PLANT INSTALLATIONS THE RIGHT SOLUTION FOR EVERY APPLIATION FLEXIBLE ONTROL ONTINUOUS FLEX SILIONE TORSION TRAY VFD DATA SERVO MOTOR EUROPEAN STYLE BUS/AT HALOGEN-FREE REELING SPEIAL USTOM

2 TRAY TRAY & VFD ABLES ABLES UV and oil resistant TR 600 S Type T-ER, MTW, WTT and SA approved 90 flexible tray V -25 SR FT4 OR AWM I/II A/B V FT4 RoHS Marking for TR 600 S 91612: SAB NORTH AMERIA TR 600 S AWG/12 (UL) T-ER 90 DRY 75 WET 600V SUN RES DIR BUR OIL RES I/II OR WTT 1000V OR MTW "FLEXING" OR DP-1 OR AWM 2586 SA I-T PV/N 90 DRY 75 WET 600V -25 SR FT4 OR AWM I/II A/B V FT4 RoHS TR 600 S is a multi-conductor, UL & SA approved flexible tray. It is rated UL T-ER, MTW, AWM and SA I/T for 600 V, 90 and UL WTT and SA AWM 1000V. TR 600 S is UV, oil resistant (Oil Res I & II) and is submersible pump rated (-7 cond.). This can be used without conduit (exposed runs). The reduced outer diameter permits easy handling and installation in confined areas. TR 600 S tray is designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications are machine tools, control systems, assembly lines, N machining centers, grinding machines, bottling equipment, data processing equipment and connections between control panels and machines. TR 600 S is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B) and is UL Type T in acc. to UL standard 1277 and NE Article 6 (92, 501). Additional uses include wind turbine power and control intended to be installed in trays or raceways within a wind turbine generator and NFPA 79 Machine areas. bare copper strands lass K (0 AWG multiple strands) black with consecutive white numbers; green-yellow earth wire from special oil resistant pressure extruded PV black Flexible stranding for easy installation Oil resistant meeting UL Oil Res I and II NFPA 79 for Industrial Machinery UL T-ER (exposed run) SA approved for T Submersible pump (14 AWG, thru 7 cond.) WTT: Wind Turbine Tray able UL-AWM / (UL) / SA: 600 V Min. bending radius fixed installation: 4 x O.D. free movement: 6 x O.D. Temperature: UL-AWM: (UL) / SA: up to +105 up to +90 static: Burning characteristics: (UL) FT4 and SA FT1, FT2, FT4 Oil resistance I + II: Sunlight resistance: old bend test: Direct Burial: Machinery Area: 91802* * * * *2 conductor s are rated UL T only info@sab.com Website:

3 TRAY ABLES TR 600 S Y WTT and Type T-ER, MTW, UV and oil resistant 90 SA approved shielded flexible tray SR FT4 OR AWM I/II A/B V FT4 RoHS Marking for TR 600 S Y : SAB NORTH AMERIA TR 600 S Y AWG/25 (UL) T-ER 90 DRY 75 WET 600V SUN RES DIR BUR OIL RES I/II OR WTT 1000V OR MTW "FLEXING" OR DP-1 OR AWM 2586 SA I-T PV/N 90 DRY 75 WET 600V -25 SR FT4 OR AWM I/II A/B V FT4 RoHS TR 600 S Y is a multi-conductor, UL & SA approved shielded flexible tray. It is rated UL T-ER, MTW, AWM and SA I/T for 600 V, 90 and UL WTT and SA AWM 1000V. TR 600 S Y is UV, oil resistant (Oil Res I & II) and is submersible pump rated (-7 cond.). This can be used without conduit (exposed runs). The reduced outer diameter permits easy handling and installation in confined areas. TR 600 S Y shielded tray is designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications are machine tools, control systems, assembly lines, N machining centers, grinding machines, bottling equipment, data processing equipment and connections between control panels and machines. TR 600 S Y is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B) and is UL Type T in acc. to UL standard 1277 and NE Article 6 (92, 501). Additional uses include wind turbine power and control intended to be installed in trays or raceways within a wind turbine generator and NFPA 79 Machine areas. Wrapping: Screen: bare copper strands lass K (0 AWG multiple strands) black with consecutive white numbers; green-yellow earth wire from fleece tape tinned copper braiding (85% coverage) special oil resistant pressure extruded PV black Flexible stranding for easy installation Oil resistant meeting UL Oil Res I and II NFPA 79 for Industrial Machinery UL T-ER (exposed run) SA approved for T Submersible pump (14 AWG, thru 7 cond.) UL-AWM / (UL) / SA: 600 V Min. bending radius fixed installation: 6 x O.D. free movement: 8 x O.D. Temperature: UL-AWM: (UL) / SA: up to +105 up to +90 static: Burning characteristics: (UL) FT4 and SA FT1, FT2, FT4 Oil resistance I + II: Sunlight resistance: old bend test: Direct Burial: Machinery Area: info@sab.com Website:

4 TRAY ABLES TR 600 HD Type T-ER Heavy Duty tray T4 SA AWM I/II A/B V FT4 RoHS Marking for TR 600 HD : A NORTH AMERIA TR 600 HD 16 AWG 4c P/N (UL) T-ER 90 DRY 75 WET 600V OIL RES I/II SUN RES DIR BUR OR WTT 1000V OR AWM V OR c ( U L) I-T PV/N 600V FT4 SA AWM I/II A/B V FT4 RoHS TR 600 HD is a severe duty motor supply for use in applications that require tray ratings, flexibility, chemical resistance and extreme oil resistance. This can be used without conduit (exposed runs). TR 600 HD is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B), UL Type T is in acc. to UL standard 1277 and NE Article 6. Wind turbine power and control is intended to be installed in trays or raceways within a wind turbine generator. bare copper strands lass K black with numerical print* and one green/yellow earth wire** *Alpha-Numeric Alternate and Inverted, ie: 1-ONE TPE orange (also available in gray or black) Heavy Duty Tray able and ontrol and Instrumentation able UL-AWM recognized for 105 Extremely oil resistant WTT: UL Subject 2277 T: UL Standard 1277 SA listed NFPA 79 for industrial machinery c(ul) I-T FT4 UL-AWM / (UL) / c(ul): 600 V Min. bending radius: 7.5 x O.D. Temperature: UL-AWM: (UL) / c(ul): up to /+90 Burning characteristics: (UL) FT4 and c(ul) FT1, FT2, FT4 Oil resistance I & II: old bend test: Alt. ** Add B at the end of Part No. for blue with numbers; one white-blue conductor and green-yellow earth wire ** Add R at the end of Part No. for red with numbers; one white-red conductor and green-yellow earth wire q Available with gray or black jacket as well as blue and red *For blue add B at end of P/N, for red add an R. i.e B AWG info@sab.com Website:

5 TRAY ABLES TR 600 HD Type T-ER Shielded Heavy Duty tray 600V FT4 SA AWM I/II AB V FT4 RoH Marking for TR 600 HD : A North America TR 600 HD 16 AWG/4c P/N ( U L) T-ER 90 DRY, 75 WET, 600V OIL RES I/II SUN RES DIR BUR OR WTT 1000V OR AWM V OR c( U L) I-T PV/N 600V FT4 SA AWM I/II AB V FT4 RoHS TR 600 HD is a shielded severe duty motor supply for use in applications that require tray ratings, flexibility, chemical resistance and extreme oil resistance. This can be used without conduit (exposed runs). TR 600 HD is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B), UL Type T is in acc. to UL standard 1277 and NE Article 6. Wind turbine power and control is intended to be installed in trays or raceways within a wind turbine generator. Inner jacket: Screen: bare copper strands lass K black with numerical print* and one green/yellow earth wire** *Alpha-Numeric Alternate and Inverted, ie: 1-ONE PV, color black tinned copper braiding, 85% coverage TPE orange (also available in gray or black) Heavy Duty Tray able and ontrol and Instrumentation able UL-AWM recognized for 105 Extremely oil resistant WTT: UL Subject 2277 T: UL Standard 1277 SA listed NFPA 79 for industrial machinery c(ul) I-T FT4 UL-AWM / (UL) / c(ul): 600 V Min. bending radius: 7.5 x O.D. Temperature: UL-AWM: (UL) / c(ul): up to /+90 Burning characteristics: (UL) FT4 and c(ul) FT1, FT2, FT4 Oil resistance I & II: old bend test: Alt. ** Add B at the end of Part No. for blue with numbers; one white-blue conductor and green-yellow earth wire ** Add R at the end of Part No. for red with numbers; one white-red conductor and green-yellow earth wire q Available with gray or black jacket as well as blue and red *For blue add B at end of P/N, for red add an R. i.e B AWG info@sab.com Website:

6 TRAY ABLES TR 600 Auto HD Type T-ER ontinuous flex Heavy Duty tray A AWM I/II A/B V FT4 RoHS Marking for TR 600 Auto HD : A NORTH AMERIA TR 600 Auto HD 16AWG/4c P/N ( U L) T-ER 90 DRY 75 WET 600V OIL RES I/II SUN RES DIR BUR OR WTT 1000V OR AWM V OR c ( U L) I-T PV/N 600V FT4 SA AWM I/II A/B V FT4 RoHS TR 600 Auto HD is a severe duty continuous flex motor supply for use in applications that require tray ratings, flexibility, chemical resistance and extreme oil resistance. This can be used without conduit (exposed runs). TR 600 Auto HD is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B), UL Type T is in acc. to UL standard 1277 and NE Article 6. Wind turbine power and control is intended to be installed in trays or raceways within a wind turbine generator. bare copper strands lass M black with numerical print* and one green/yellow earth wire** *Alpha-Numeric Alternate and Inverted, ie: 1-ONE with fleece tape seperator TPE black Heavy Duty Tray able and ontrol and Instrumentation able UL-AWM recognized for 105 Extremely oil resistant WTT: UL Subject 2277 T: UL Standard 1277 SA listed NFPA 79 for industrial machinery c(ul) I-T FT4 continuous flex applications Min. bending radius fixed installation: free movement: continuous flexing: q UL-AWM / (UL) / c(ul): 600 V 4 x O.D. 6 x O.D. 10 x O.D. Temperature: UL-AWM: (UL) / c(ul): up to /+90 old Bend Test: Burning characteristics: (UL) Vertical Tray Flame and c(ul) FT1, FT2, FT4 Oil resistance I & II: Alt. ** Add B at the end of Part No. for Blue onductors blue with numbers; one white-blue conductor and green-yellow earth wire ** Add R at the end of Part No. for Red onductors red with numbers; one white-red conductor and green-yellow earth wire Available with blue or red *For blue add B at end of P/N, for red add an R. i.e B info@sab.com Website:

7 TRAY ABLES TR 600 Auto HD Type T-ER Shielded continuous flex Heavy Duty tray AWM I/II A/B V FT4 RoHS Marking for TR 600 Auto HD : A NORTH AMERIA TR 600 Auto HD 16AWG/4c P/N ( U L) T-ER 90 DRY 75 WET 600V OIL RES I/II SUN RES DIR BUR OR WTT 1000V OR AWM V OR c ( U L) I-T PV/N 600V FT4 SA AWM I/II A/B V FT4 RoHS TR 600 Auto HD is a shielded severe duty continuous flex motor supply for use in applications that require tray ratings, flexibility, chemical resistance and extreme oil resistance. This can be used without conduit (exposed runs). TR 600 HD is permitted to be used in hazardous (classified) locations lass I, Division 2 per NE Article (B), UL Type T is in acc. to UL standard 1277 and NE Article 6. Wind turbine power and control is intended to be installed in trays or raceways within a wind turbine generator. Wrapping: Screen: Separator: bare copper strands lass M black with numerical print* and one green/yellow earth wire** *Alpha-Numeric Alternate and Inverted, ie: 1-ONE fleece binder tinned copper braiding (85% coverage) tissue tape TPE black Heavy Duty Tray able and ontrol and Instrumentation able UL-AWM recognized for 105 Extremely oil resistant WTT: UL Subject 2277 T: UL Standard 1277 SA listed NFPA 79 for industrial machinery c(ul) I-T FT4 continuous flex applications Min. bending radius fixed installation: free movement: continuous flexing: q UL-AWM / (UL) / c(ul): 600 V 5 x O.D. 10 x O.D. 12 x O.D. Temperature: UL-AWM: (UL) / c(ul): up to /+90 old Bend Test: Burning characteristics: (UL) Vertical Tray Flame and c(ul) FT1, FT2, FT4 Oil resistance I & II: Alt. ** Add B at the end of Part No. for Blue onductors blue with numbers; one white-blue conductor and green-yellow earth wire ** Add R at the end of Part No. for Red onductors red with numbers; one white-red conductor and green-yellow earth wire Available with blue or red *For blue add B at end of P/N, for red add an R. i.e B info@sab.com Website:

8 44 Kaplan Drive Fairfield, NJ Toll Free: