Condition Report /09/ :00 - Medical Equipment Auction :00

Transcription

1 Condition Report Sale Sale Date Location: Viewing: Removal: /09/ :00 - Medical Equipment Auction :00 Malmesbury, Wiltshire, UK Friday 9th September 12pm-5pm, Monday 12th September 10am-6pm and morning of the sale from 8.30am By 4pm on Thursday 15th September Storage charges will be incurred after this date These reports are compiled by our Medical Engineering Team and are for guidance only - all lots are sold as seen, as per our Conditions of Sale. We recommend that wherever possible you inspect lots prior to purchase. Lot 2 Software: Datex Ohmeda Aestiva 5 Anaesthetic Machine 4.8 The system powered up fine and completed self initialisation successfully, both displays are in good condition and functional. Rotating knob and soft keys are all functional. Available ventilation modes include Volume and pressure controlled, SIMV, and PSVPro Mode. Medical gas hoses, scavenging system, and CO2 absorber are included and appear to be in good condition. The Flowmeter assembly, patient breathing system, and bellows are in tact. The system was tested with a test lung, the Minute Volume was checked against the frequency and was found to be within limits. A Module Rack is present, but no modules or accessories are included. The back up battery was not working at the time of testing. Overall the system is in satisfactory physical condition. Lot 5 Associated Equipment: Lot 6 Stack Trolley with Fujinon E400 Processor and Fujinon E400 Light Source, Sony 2004 Sony Video printer UP-51MD The Fujinon E 400 processor and light source power up ok. The light source xenon lamp and brightness control are in good working order. The processor was tested with a compatible video scope and test monitor; good image quality was displayed. All functions keys and keyboard are working fine. The Sony colour printer power up and he funcvtion keys and LCD are working : not fully tested. System is mounted on a trolley. Lot is in good overall condition. Year of manufacture Some interconnecting cables are included. Spacelabs Ultracare SLP Anaesthesia Monitor Page 1 6

2 Lot 7 Spacelabs Ultracare SLP Anaesthesia Monitor - FJCM The anaesthesia monitor powers up and completes the initial self test successfully. Display screen, function keys and rotary control kob are in good working order. The unit contains the following parameters: ECG, SpO2, NIBP, IBP, Temp, NMT, Spirometry and Gas measurements (CO2, O2, N2O, AA, ID and P&V). The monitor appears to be functional but has not been fully tested. Overall the unit is i good physical condition. Lot 8 Spacelabs Ultracare SLP Anaesthesia Monitor - FCJM The anaesthesia monitor powers up and completes the initial self test successfully. Display screen, function keys and rotary control kob are in good working order. The unit contains the following parameters: ECG, SpO2, NIBP, IBP, Temp, NMT, Spirometry and Gas measurements (CO2, O2, N2O, AA, ID and P&V). The monitor appears to be functional but has not been fully tested. Overall the unit is i good physical condition. Lot 15 Accessories: Lot 18 Eschmann TD830 Diathermy with Foot Switches Monopolar footswitches The unit power up and display comes on. Most of the soft keys have fallen through and unable to activate the functions. The PCB behind the display and keys is loose. The system was not fully tested. Aloka SSD-500 Ultrasound with Probe The ultrasound powers on. The keyboard, trackball, display and switches are all functioning. Some buttons are worn but still functional. The probe is in good physical condition, but a shadow shows in the image. Besides that B and M mode, gain, and focus are all functioning fine. The resolution and grayscale are satisfactory. Lot 50 Kappa 52 Video Colposcope with Camera Control Unit, Remote Control, Manual, The colposcope DVC 750 processor powers on, all indicators and softbuttons are functional. Display is not included in this lot. For testing a compatible display was connected. The system produces good quality images and the light source is in good working order. Focus and Zoom are working fine, a white balance was completed successfully. The remote control is in good working condition. Overall the unit is in reasonably good condition. Page 2 6

3 Lot 51 Operating Hours: Associated Equipment: Accessories: Lot 52 Accessories: Lot 58 Datascope System 98XT Cardio Sync 2 Balloon Pump S A Datascope System 90 Series IABP Trainer Datascope IABP Doppler ECG Cable Operating/ Service Manual The IABP power and system self-test completed ok. The LCD and function keys are working fine. All adjustment and setting was functional. He cylinder is not included and warming indicator for low He is on. The built-in pump is running but pressure check was not done. The ECG trace was working and printer in good working order. The IABP was not fully tested but it is in good physical condition. The Datascope IABP Doppler is in good working order and physical condition. Zeiss Theatre Microscope Eye pieces set 12,5x Objective lens f=200 The power supply for the light source is working fine. The optical is ok but needs cleaning. Both observer tube and binocular assemblies are functional. System is in an average physical condition with several scratches and rust marks on the base. Eye pieces - 12,5 x and objective lens: f=200. Iris Medical Oculight GL Laser with Foot Switch, Key and 3 x Pairs of Glasses Powers up and completes the system self test successfully. Dispay panel and controls appear to be functional but the fibre optic cable / laser aperture is not included to carry out further checks. The unit is in reasonable physical condition. Lot 68 Operating Hours: Software: Draeger Caleo Infant Incubator ARSL V 2.01 Page 3 6

4 Lot 69 Operating Hours: Software: Draeger Caleo Infant Incubator ARRM V 2.01 The incubator power up and passess its self tests. The control panel's LCD, function keys and rotary selector knob are working. The system was tested in the air temperature mode and the set temperatures were maintained accordingly. The skin temperature mode was not fully tested since the unit did not come with skin probe. Oxygen sensor was inoperative at the time of test. Humidifier monitor is working fine. The incubator built-in weighing scale was tested and it is in good working order. All motorised tilt and height adjustment are functional. Incubator canopy, doors and latches are all in good order. this incubator had boiler upgrade fitted in 26/02/2010. The unit is in good physical condition. Lot 72 Draeger Babylog 8000 Plus Ventilator The Babylog ventilator powers on. The display is missing a few pixels, all soft buttons are functional accordingly. The flowsensor was able to calibrate, whereas for the O2 sensor an error message displayed: "O2 measurement disturbed, chance sensor". The system was tested in SIPPV mode and was found to be working accurately. Following ventilator modes are available: CPaP, IPPV/IMV, SIMV, SIPPV, PSV. Operating hours at the time of testing were at 5377 hours. Overall the unit is in satisfactory condition, medical hoses are included. Lot 87 Edan im8 Patient Monitor Boxed as New 2016 Page 4 6

5 Lot 88 Edan im8 Patient Monitor Boxed as New (No Battery) 2016 Powers up ok. Display screen, function keys and rotary control kob are in good working order. The unit contains the following parameters: ECG, SpO2, NIBP and Temp. The monitor appears to be functional but has not been fully tested. The unit is in excellent physical condition (appears to be not used). All accessories (ECG lead, SpO2 probe, NIBP cuff with hose and Temp probe) are included. Battery is not included. Lot 91 Sonosite Micromaxx Ultrasound System with L38E/10.5MHz Probe The unit does not power up. Both the ultrasound unit and the transducer are in good physical condition. No further checks carried out. Battery is in place and the unit also includes a mini dock adaptor. Charger is not included. Lot 105 Accessories: Lot 109 Lot 120 ERBE ICC 200 Diathermy with Foot Switches Footswitch The ICC 200 power up and system self-test completed ok. The numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and cut and bipolar measured values were within limit, except for the coagulation mode the values were slightly lower than expected. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. Boston Scientific Zoom Latitude Programming System with ECG Lead/Telemetry The unit powers up and successfully goes through its boot-up process. The touchscreen display, control panel function keys and printer are in good working order. When tested with a patient simulator, the unit produced good ECG waveforms and printouts. The telemetry wand looks to be in good physical condition but was not tested. Overall the unit along with all the accessories is in fairly good physical condition. Olympus CYF-4 Cystoscope Page 5 6

6 Lot 121 Storz Fibrescope - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Good image - Leak Test Not Tested - Overall Condition Good physical condition but fibre optic cable is not included - Dimension: 600 x 4 mm Lot 122 Fujinon Videoscope - Badge Removed - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Not tested (processor not available) - Remote Control Switches Not tested (processor not available) - Distal End Satisfactory condition - Image Quality Not tested (processor not available) - Leak Test Leaking - Overall Condition Good physical condition but leaking. Image quality not tested. - Dimension: 1600 x 13 mm Lot 123 Fujinon EC-530WL Videoscope Page 6 6

7 Lot 124 Fujinon Videoscope - Badge Removed - Insertion Tube Good condition (with a small dent) - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Good image - Leak Test Leaking - Overall Condition Good physical condition and good iamge but leaking. - Dimension: 1000 x 13 mm Lot 125 Fujinon Videoscope - Badge Removed - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Good overall condition - Dimension: 1000 x 13 mm Lot 126 Fujinon EC-450LP5 Videoscope Page 7 6

8 - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Good overall condition - Dimension: 1600 x 12 mm Lot 127 Fujinon EC-530WL Videoscope - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement, up/down lock not working - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Not tested (processor not available) - Remote Control Switches Not tested (processor not available) - Distal End Good condition - Image Quality Not tested (processor not available) - Leak Test Pass - Overall Condition Good physical condition. Image quality not tested. - Dimension: 1600 x 13 mm Lot 128 Fujinon Colonoscope - Badge Removed Page 8 6

9 Lot 129 Fujinon EB-470T Bronchoscope - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Good image - Leak Test Leaking - Overall Condition Good physical condition and good iamge but leaking. - Dimension: 500 x 6 mm Lot 130 Fujinon EB-470T Bronchoscope - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Cabble has a dent (sustained internal damage) - Objective Lens & Focussing Unable to check - Remote Control Switches Functional - Distal End Good condition - Image Quality Very dark image - Leak Test Pass - Overall Condition Good physical condition but very dark image. - Dimension: 500 x 6 mm Lot 131 Olympus GIF-PQ20 Flexible Scope Page 9 6

10 Lot 132 Olympus Videoscope TJF240 - Insertion Tube Good condition (distal cover missing) - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition (distal cover missing) - Image Quality Good image - Leak Test Pass - Forceps Elevation Mechanism Ok - Overall Condition Good overall condition - Dimension: 1200 x 12 mm Lot 133 Pentax 0197 Flexi Scope - Insertion Tube Satisfactory condition (has a small dent) - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Good image - Leak Test Pass - Overall Condition Satisfactory physical condition but fibre optic cable is not included. - Dimension: 600 x 4 mm Page 10 6

11 Lot 134 Pentax FL-10BS Flexi Scope - Insertion Tube Satisfactory condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Good image - Leak Test Pass - Overall Condition Satisfactory physical condition but fibre optic cable is not included. - Dimension: 600 x 4 mm Lot 135 Storz Endoscope BN1 - Insertion Tube Satisfactory condition (sleeve damaged on the flexible section) - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Satisfactory image (small section of fibres broken) - Leak Test Not tested - Overall Condition Satisfactory physical condition but fibre optic cable is not included. - Dimension: 600 x 5 mm Lot 136 Olympus Evis CYF Type 240A Videoscope Page 11 6

12 Lot 137 Fujinon EG 450WR5 Gastroscope - 2G202A596 - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing satisfactory - Remote Control Switches Functional - Distal End Good condition - Image Quality Satisfactory image but shows some noise when out of focus - Leak Test Pass - Overall Condition Satisfactory overall condition with a little bit of noise on the image. - Dimension: 1000 x 10 mm Lot 138 Fujinon Gastroscope (Badge Erased) - Insertion Tube Very good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Good overall condition. - Dimension: 1000 x 10 mm Lot 139 Fujinon Gastroscope - 4G201A412 (Badge Erased) Page 12 6

13 Lot 140 Fujinon Gastroscope - SN4G201A553 (Badge Erased) - Insertion Tube Good condition (has a small dent) - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission satisfactory (one light channel not working) - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Good image - Leak Test Pass - Overall Condition Good overall condition. One light channel not working. - Dimension: 1000 x 10 mm Lot 141 Fujinon EC 530WL Colonscope - 2C447B005 Page 13 6

14 Lot 142 Fujinon Colonscope - 1C308A312 (Badge Erased) - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Good overall condition. - Dimension: 1600 x 13 mm Lot 143 Fujinon Gastroscope - 2G201A272 (Badge Erased) - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Good overall condition. - Dimension: 1000 x 10 mm Lot 144 Fujinon Colonscope - 1C308A313 (Badge Erased) Page 14 6

15 Lot 145 Fujinon Colonscope - 2C308A041 (Badge Erased) - Insertion Tube Very good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Very good overall condition. - Dimension: 1600 x 12 mm Lot 146 Pentax F-13 Flexible Scope RBS - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Good image (has two broken fibres) - Leak Test Pass - Overall Condition Satisfactory physical condition but fibre optic cable is not included. - Dimension: 550 x 4 mm Lot 147 Pentax F-13 RBS Flexible Page 15 6

16 Lot 148 Pentax F-13 RBS Flexible - Insertion Tube Satisfactory condition (has a few dents) - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Good image (has two/three broken fibres) - Leak Test Pass - Overall Condition Satisfactory physical condition with dents on the insertion tube and fibre optic cable is not included. - Dimension: 550 x 4 mm Lot 149 Pentax FCY 15RBS Cystoscope with BS-LH2 Light Source and Qty of Page 16 6

17 Lot 150 Pentax FCY 15RBS Cystoscope with BS-LH2 Light Source and Qty of - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Very good physical condition. No fibre optic cable but includes a portable battery powered light source (Pentax BS-LH2). - Dimension: 350 x 5 mm Lot 151 Pentax FCY 15RBS Cystoscope with BS-LH2 Light Source and Qty of - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement - Light Guide Cable & Light Transmission Good light transmission but no fibre optic cable - Objective Lens & Focussing Good focus - Remote Control Switches N/A - Distal End Good condition - Image Quality Very good image - Leak Test Pass - Overall Condition Very good physical condition. No fibre optic cable but includes a portable battery powered light source (Pentax BS-LH2). - Dimension: 350 x 5 mm Lot 152 Pentax FCY 15RBS Cystoscope with BS-LH2 Light Source and Qty of Page 17 6

18 Lot 170 Storz 6 Urethrascope with Sheath (View and Light Guide Fine) In good physical condition with clear image and good light transmission. Lot 182 Toshiba PVT-661 VT Ultrasound Probe N/A The transducer was tested with phantom and had poor grey scale and resolution. There is signs of crystal dropout in middle of image. Lens with signs of normal wear and tear. Physical condition is good. Lot 183 Toshiba PST-30 BT Ultrasound Probe N/A The transducer was tested with phantom and had poor grey scale and resolution. There is noise (spikes) accross the image. Lens with cracks on all four corners and sighns of detach on one side. Physical condition is poor. Lot 195 Toshiba PVT-375 BT Ultrasound Probe N/A N/A Page 18 6

19 The transducer was tested with phantom and had poor grey scale and resolution. There is big crystal dropout in middle of image. Lens seems in good aspect with signs of normal wear and tear. Physical condition is good. Lot 196 Toshiba PVT-661 VT Ultrasound Probe N/A The transducer was tested with phantom and had poor grey scale and resolution. There is signs of crystal dropout in middle of image. Lens is in good aspect with signs of normal wear and tear. Physical condition is good. Lot 207 Olympus Videoscope TJF240 - Insertion Tube Good condition - Bending mechanism & Angulation Control Good movement & locks - Light Guide Cable & Light Transmission Good - Objective Lens & Focussing Good focus - Remote Control Switches Functional - Distal End Good condition (end cap not included) - Image Quality Good image - Leak Test Pass - Overall Condition Good overall condition. - Dimension: No Carry case Lot 209 Lot 210 Olympus MH-977 Pig Tail Lead The video cable MH-977 was tested with compatible stack and videoscope and found to be working fine. Fair physical condition. Olympus GIF-N30 Flexi Scope (No Case) Page 19 6

20 Lot 249 Lot 250 Operating Hours: Software: Lot 254 Datascope System 98XT Balloon Pump S J5 The IABP power and system self-test completed ok. The LCD and function keys are working fine. All adjustment and setting was functional. Helium cylinder and ECG lead is not included and warming indicator for low He is on. The built-in pump is running but pressure check was not done. The ECG trace was working and printer in good working order when tested with test ECG lead. The IABP was not fully tested but it is in good physical condition. The Datascope IABP Doppler is in good working order and physical condition. The drip pole hook has detached from the pole. Draeger Caleo Infant Incubator V2.01 The incubator power up; the control panel's LCD, function keys and rotary selector knob are working. The system was tested in the air temperature mode and the set temperature s were maintained accordingly. The skin temperature mode was not fully tested since the unit did not come with skin probe. Oxygen sensor was inoperative at the time of test. Humidifier monitor is working fine. The incubator built-in weighing scale was tested and it is in good working order. All motorised tilt and height adjustment are functional. The unit is in good physical condition. Hanaulux Blue 80 Mobile Examination Lamp The lamp power on fine. Unit comes with an EU plug. Several marks and scratches on stand and the lamp backside. Overall the unit is in satisfactory condition. Lot 256 Accessories: Metrum Cryoflex CSC 2334 IF Probe hose connectors Footswitch Cylinder hose connector Page 20 6

21 Lot 257 Draeger Fabius Anaesthetic Machine Flowmeters and pipeline pressure gauges are in good working order and the O2 flush is also operational. Medical gas hoses vacuum regulator with hose and AGSS receiver with hose are included. The unit does not contain ventilator. Overall it is in reasonable physical condition. The O2 flowmeter is slightly faulty. Lot 259 Datex Aestiva 5 Anaesthetic Machine with Isoflurane Vapouriser The system powered up fine and completed self initialisation successfully, both displays are in good condition and functional. Rotating knob and soft keys are all functional. Available ventilation modes include Volume and pressure controlled, SIMV, and PSVPro Mode. Medical gas hoses, scavenging system, and CO2 absorber are included and appear to be in good condition. The Flowmeter assembly, patient breathing system, and bellows are in tact. The system was tested with a test lung, the Minute Volume was checked against the frequency and was found to be within limits. A Module Rack with a multiparameter module is present, but no accessories. Also a Anaesthetic Agent Canister is included (Isoflurane only). The back up battery was working at the time of testing. Overall the system is in satisfactory physical condition. Lot 260 Operating Hours: Software: Ohmeda Incubator with Scale HCDC50517 Aprox N/A N/A Page 21 6

22 Lot 261 Operating Hours: Software: Ohmeda Incubator HCDC50023 aprox N/A N/A Unit powers up and a permanent audible alarm plus probe failure LED alarm lit permanently. This unit has some canopy doors and laches dismantled and placed inside, on top of bed. Canopy front left side is cracked (previous glue attempt have been made by third party) and canopy is not attached to base. Mechanic bed tilting and electro-hydraulic height adjustment are functioning well. There are naked wires at mains extension plug (back side of unit). Unable to perform further tests due to the permanent alarm. Lot 263 Novalung Vision Ventilator The unit powers on and completes initial self test successfully. The expiratory cassett is not included, therefore the unit was not fully tested. The display and rotary knobs were all in good condition. Modes to choose from by mechanical switch are HFOV, Spont, and Vent. SIMV and CMV modes were displayed as well, but as mentioned the system was not fully tested. The system appears to be in tact and in good physical condition. Lot 264 Novalung Vision Ventilator - CHD-14078, D5053 The unit powers on and completes initial self test successfully. The expiratory cassett is not included, therefore the unit was not fully tested. The display and rotary knobs were all in good condition. Modes to choose from by mechanical switch are HFOV, Spont, and Vent. SIMV and CMV modes were displayed as well, but as mentioned the system was not fully tested. The system appears to be in tact and in good physical condition. Lot 265 Leica Wild Operating Microscope (No Eye Pieces or Lens) The Wild microscope M690 power up and the control panel function knobs are working. The halogen light system is functional with good brightness control. The optical system of the microscope could not be tested since the binocular assembly, eye pieces and objective lens are missing. The footswitch control is not attached and therefore the motorised zoom, focus and X-Y adjustment functions could not be fully tested. The microscope is in fair physical condition with few rusty patches on the base. Page 22 6

23 Lot 267 Lot 269 Accessories: Software: Lot 272 Lot 273 Accessories: Lot 275 Associated Equipment: Eschmann MR Operating Table Te operating table hydraulic lift and mechanical adjustment for trendelenberg, side tilt and flex are working fine. The head and leg support adjust are working as well. Cushions are in good condition. The brake release peddle is loose, not working properly. Otherwise in fair physical condition. Human Med AG Body-Jet Water Assisted Liposuction Unit Pneumatic Footswitch x2 C: 0.13 P: 0.12 The unit power up and the flow/volume display and function keys are working fine. There are no probe or accessories to test the water jet system, but the pump can be heard running with the foot switch activated. The vacuum pump, jar selector, vacuum regulator and manometer are in good working order. Good vacuum power was recorded. The weighing system for the volume monitoring appears to be working but not fully tested. The system is in good physical and cosmetic condition. Draeger Transport Incubator 5400 The unit powers up fine. All latches and hinges are in satisfactory condition. The unit heated up according to set values and was able to maintain the temperature for the time of testing. Medical hoses are included, but the O2 application was not tested. All switches and gauges appear to be functional, but have not been fully tested. The battery was not working at the time of testing, the power failure alarm is not working. Mattress is included and in okay condition. BK Medical Falcon 2101 EXL Ultrasound (No Probe) User's Guide manual The US unit power and the system initialisation completed successfully. The unit is without transducer, therefore full test was not possible. The CRT display and control console's function keys/keyboard are in good working order. The unit is not good physical and cosmetic condition. Olympus WM-30 Workstation with CLV-U20 Light Source, CV-200 Processor, Olympus Uteroflator P Olympus Light source CLV-U20 Olympus Video processor CV-200 Panasonic VCR Sony CRT monitor Page 23 6

24 Lot 276 Lot 300 Zeiss Colposcope (No Lens) The colposcope OPMI 1-FC power supply and halogen lamp with brightness control are working fine. But the fibre optic guide cable is missing. The optical system is in fair condition with good magnification. Objective lens f=250. Eye pieces - 10x/22B. One of the hand lock screew is missing for the arm support swing lock. System is in an average physical condition. Dinamap Pro 400 BP Monitor on Stand, GE Dash 2500 Patient Monitor on Stand The Dash 2500 powers on, the battery is flat. NIBP is corresponding with the system, all buttons and the rotary knob are in working condition. The display is functional, overall the unit is in good physical condition. Procare 400 also powers on fine. Available parameters are NIBP, Temp, and SPO2, but not tested. NIBP hose is included. Power adaptor is not included. Overall this unit is in satisfactory condition. Lot 307 Luxo AIM-100 Theatre Light with Transformer/Wall Attachment - Part Number The minor operating light is in good physical condition with the lamps in place but the uit has not been tested. Ceiling mount plate and transformer are included. Lot 318 Lot 333 Storz Trolley with Fujinon E400 Processor, E400 Light Source , The Fujinon E 400 processor and light source power up ok. The light source xenon lamp and brightness control are in good working order. The processor was tested with a compatible video scope and test monitor; good image quality was displayed. All functions keys and keyboard are working fine. The Sony colour printer power up and he funcvtion keys and LCD are working : not fully tested. System is mounted on a trolley. Lot is in good overall condition. Year of manufacture Some interconnecting cables are included. GE Dash 4000 Patient Monitor The unit powers on fine and completes the initial self test successfully. The display is in good condition. The rotary knob works intermittantly when pushed. The ECG application was tested with an ECG analyzer and was found to be in good working condition. NIPB was also corresponding with the system and appears to be working fine. The unit is in a satisfactory condition, accessories are not included. Lot 334 GE Dash 4000 Patient Monitor Page 24 6

25 The unit powers on fine and completes the initial self test successfully. The display, soft keys, and rotary knob are in good condition. The ECG application was tested with an ECG analyzer and was found to be in good working condition. NIPB was also corresponding with the system and appears to be working fine. The unit is in a good condition, accessories are not included. Lot 335 GE Dash 4000 Patient Monitor The unit powers on fine and completes the initial self test successfully. The display, soft keys, and rotary knob are in good condition. The ECG application was tested with an ECG analyzer and was found to be in good working condition. NIPB was also corresponding with the system and appears to be working fine. The unit is in a good condition, accessories are not included. Lot 338 Accessories: Lot 339 Lot 357 Lot 359 Eschmann TD830 Diathermy with Foot Switches Monopolar footswitches The TD830 power up ok and numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar measured RF power values were within limit. Bipolar footswitch is not included and function was not fully tested. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. Eschmann TD830 Diathermy with Foot Switches The TD830 power up ok and numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar measured RF power values were within limit. Bipolar footswitch is not included and function was not fully tested. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. ERBE ICC200 Diathermy (No Foot Switch) The ICC 200 power up and system self-test completed ok. The numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar and bipolar measured values were within limit. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. GE Dinamap Pro400 BP Monitors x , All units power on, buttons are functional but some worn. Available modes are NIBP, SPO2, and Temperature. A unit is missing the rotary knob, another has a rusty NIPB connector. The trolley of one unit is seized up. Overall the units are in medium to poor condition, not fully tested. Page 25 6

26 Lot 360 Software: GE MAC 1200 ECG Recorder (No Leads) V5.1 Unit powers up and passes its initial self-test. The display, keyboard and other softkeys are in good working order. When tested with a patient simulator Riegel Uni-Pulse, the unit produced good ECG traces on the display and also good clear printouts. This unit has no ECG leads. Backup battery was also functional at the time of testing. The roll-stand, castors and brakes are also in good condition. Overall the unit is in satisfactory physical condition. Lot 446 Dinamap Monitors x Critikon: All indicators and softbuttons are functional. The NIBP hose to cuff connection is damaged. XL: Also all buttons are working and display is in okay condition. Hose and cuff included. Compact T: Static sound when trying to power on, no further testing conducted. Criticon DM Plus: Powers up fine, all options are accessable. NIBP hose is included. Lot 448 Storz Halogen 150 Light Source The light source is in good working order and reasonable physical condition. Lot 451 Spacelabs Patient Monitor with Leads The unit completes its self test, touchscreen diagnostic error warning is displayed. Unit is in poor condition, no further tests conducted. Lot 452 Datex Ohmeda S5 Patient Monitors x 2 with Adaptors The unis power on fine. The display of one of the units is missing lines of pixels, which causes some difficulty readig displayed information. Available modes are SPO2, NIBP, and ECG, but not fully tested. Lot 462 Olympus CLK-4 Light Source The lightsource comes on, brightness adjustment was functional, and pump was working as well. Overall the unit appears to be in good condition. Page 26 6

27 Lot 468 Accessories: Lot 472 Eschmann TD830 Diathermy with Foot Switches Footswitch The TD830 power up ok and numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar measured RF power values were within limit. Bipolar footswitch is not included and function was not fully tested. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. Edan im8 Patient Monitor Boxed as New 2016 Powers up ok. Display screen, function keys and rotary control kob are in good working order. The unit contains the following parameters: ECG, SpO2, NIBP and Temp. The monitor appears to be functional but has not been fully tested. The unit is in excellent physical condition (appears to be not used). All accessories (ECG lead, SpO2 probe, NIBP cuff with hose and Temp probe) are included. Battery is also included. Lot 473 Edan im8 Patient Monitor Boxed as New 2016 Powers up ok. Display screen, function keys and rotary control kob are in good working order. The unit contains the following parameters: ECG, SpO2, NIBP and Temp. The monitor appears to be functional but has not been fully tested. The unit is in excellent physical condition (appears to be not used). All accessories (ECG lead, SpO2 probe, NIBP cuff with hose and Temp probe) are included. Battery is also included. Lot 499 Software: GE MAC 1200ST ECG Recorder (No Leads) V6.2 Unit powers up and passes its initial self-test. The display, keyboard and other softkeys are in good working order. When tested with a patient simulator Riegel Uni-Pulse, the unit produced good ECG traces on the display and also good clear printouts. This unit has no ECG leads. Backup battery was also functional at the time of testing. The roll-stand, castors and brakes are also in good condition. Overall the unit is in satisfactory physical condition. Lot 500 Steris Hausted APC - All Purpose Chair Page 27 6

28 Lot 501 Steris Hausted APC - All Purpose Chair All mechanical positioning adjustments and brakes are in good working order. Cushions are included and overall the unit is in good physical condition with side cots also in place. Lot 507 Dinamap Pro 400V2 Patient Monitor x 3 Two of the monitors power up and complete the system self test successfully. Display panels and controls are in good working order and the units appear to be functional (not been fully tested). One of the monitors does not power up. The units are in reasonable physical condition. SpO2 probes and BP cuffs are included. Lot 516 Lot 522 Lot 529 Lot 531 Toshiba I Style Ultrasound (No Probes, For Spares and Repair) The Toshiba Nimio XG has several of it electronics part stripped off. All the knobs on the control console has been remeoved. The LCD monitor and keyboard is still with the unit, but unable to power up to find if the LCD is working. The Mitsubishi printer P93 was tested separately and it was in good working order. The statem comes without probes and the sides and back cover is missing. Most of the slotted PCBs are in place. Dinamap Pro 400 Patient Monitor x 3 Units all power on, soft buttons on all three units are slightly worn but functional. Available parameters are NIBP, SPO2, and Temp. 3 SpO2 probes and 3 NIBP cuffs are included and 1 temperature probe, but not tested. Datex Ohmeda Aestiv/5 Anaesthetic Machine with S/5 Monitor The unit powers on and completes its initial self test successfully. A module rack is not included, therefore the monioring display was not tested, it is physically in tact. The vent display is in average condition, buttons are slighly worn and a number of pixels are missing. The system was tested with a test lung, the breathing circuit is functioning, and the results for the tidal volume and frequency checked against the minute volume were within limits. Available modes are pressure and volume conrolled. The O2 sensor calibration was completed. Granulates in the CO2 absorber are discolored. The back up battery was not working at the time of testing. Dinamap Pro 300V2 Patient Monitor x 3 Page 28 6

29 Lot 532 Zeiss Colposcope (No Lens) Powers up ok. Lamp and brightness control are in good working order and the optical system is clear. The manual position adjustments are in tact, one cover of a rotating knob is missing, but the adjustment is working. The binocular assembly is intact with eyepieces and objective lens in place and the system produces clear images. The focus and magnification controls are also functional. Overall the unit is in good physical condition. Lot 537 Storz Tricam Camera Head No compatible system was available, therefore not tested. The camera is in good physical and cosmetic condition. Lot 538 Storz P1 Image 1 Camera Head The camera head is in a good physical condition. White balance, focus are in good working order, good quality image was achieved. Push buttons are functioning. Overall the camerahead is in satisfactory condition. Lot 542 De Soutter Cordless Operating Handeice x 3 with Seven Attachments and Battery The handpieces and attachments are in satisfactory physicl condition with minor sigs of wear. Batteries are not included therefore unable to test the handpieces. Handpiece Model: KDX-600 (sagital saw), CDX-600 (recip. saw), MDX-600 (drill/reamer). Lot 554 Software: Lot 560 ERBE ICC350 and ERBE APC 300 Diathermy V2.11 (APC 300) The ICC 350 power up and the numerical; displays and power selector soft key and mode selectors are in good working order. The unit has no accessories or foot switches. the unit electronics appears to be working but not fully tested. The APC 3000 power up with the system self-test completed ok. The LCD and function keys are in good working order. The system come up with the He cylinder empty warming. He cylinder not included and there are no accessories attached. System is in fair physical condition but not fully tested. Datex Ohmeda Monitor with E-PRESTN and ECAIOV Modules Page 29 6

30 Accessories: Gas module: SN: DM: 11/2008 Type: E-CAiO-00 ECG Module: SN: DM: 08/2008 Type: E-PRESTN-00 The unit (type F-CM1-04) powers on and passess its initial self tests. Pannel buttons, rotary knob and display are fully functional and in good condition. The gas module and blood pressure monitor seems in good working order however they hadn't been fully tested. The ECG module was tested with the Riegel Uni-Pulse and SPO2 with OxSim OX-1 and they are in good working order. Also the battery mode was working fine at the time of tests (it needs a good charge). The unit has no leads (ECG, SPO2, mains, NIBP cuff). Overall the physical and cosmetic condition of the unit is good. Lot 561 Accessories: Datex Ohmeda Monitor with E-PRESTN and ECAIOV Modules ECG module: SN: DM: 01/2008 Type: E-PRESTN-00 Gas module: SN: DM: 02/2011 Type: E-CAiOV-00 Page 30 6

31 Lot 585 Ohmeda Incubator The unit powers on and completes initial self test successfully. All latches, hinges and port holes are in tact. Indicators come on and are functional. Some of the tubing access covers are broken. The mattress is included and in average condition. The bed tilt is functioning fine, as well as the electronic height adjustment. The unit heats up according to set values and was able to maintain the temperature for the period of testing. Battery back up was not working at the time of testing. Overall the unit is in satisfactory condition. Lot 586 Olympus TI-1900 Stack Trolley with CV-240 Processor, CLV-U4 Light Source, All units of the stack system turn on accordingly without any errors. The stack system was tested with a compatible pig tail and endoscope, as those are not incldued. Also the interconnecting cable between the processor and the lightsource is missing. Both processor and lightsource are in good working condition, all buttons and indicators were functional. The whitebalance appears to be working but was not verified as the system was tested in B&W. The CRT display is in good condition, and the xenon lamp was in good working order. Overall the system is in a satisfactory condition. Lot 587 Accessories: Datex Ohmeda S/5 Moniotor with NIBP, E-INTPSM adn E-CAIOV Modules Gas module: SN: DM: 2005 Type: E-CAiOV-00 ECG module: SN: DM: 12/2014 Type: E-PSMP-01 Interface module for PSM: E-INTPSM Ref: M Page 31 6

32 Lot 589 Datex Ohmeda S/5 Anaesthesia Monitor with M-CAiO abd M-OPRESN Modules The unit powers on and completes its initial self test successfully. Display, softbuttons, and rotator knob are in good condition and functioning. A multiparameter module and a gas sensor are included and appear to be in tact, but not fully tested. The NIPB and Gas module corresponded accordingly and appear to be working fine. The water trap is missing from the gas sensor. The back up battery was working at the time of testing. Overall the unit is in satisfactory condition. Lot 603 Accessories: Lot 611 Lot 614 Accessories: Lot 618 Erbe ICC200 Diathermy with Footswitch Footswitch The ICC 200 power up and system self-test completed ok. The numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar and bipolar measured values were within limit. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in fair physical condition. Pentax Stack Trolley with Fujinon E400 Light Source and E400 Processor The Fujinon E 400 processor and light source power up ok. The light source xenon lamp and brightness control are in good working order. The processor was tested with a compatible video scope and test monitor; good image quality was displayed. All functions keys are working fine. System is mounted on a Pentax trolley with voltage stabiliser. Lot is in good overall condition. Year of manufacture Video cables are not included. Erbe ICC200 Diathermy and Footswitch Footswitch Service manual The ICC 200 power up and system self-test completed ok. The numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar and bipolar measured values were within limit. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in very good physical condition. Datex Ohmeda S/5 Anaesthesia Monitor with M-CAiO abd M-OPRESN Modules Page 32 6

33 Lot 641 Lot 643 Lot 646 Accessories: Lot 651 Eschmann TD830 Diathermy (No Foot Switch) The TD830 power up ok and numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and monopolar measured RF power values were within limit. Bipolar footswitch is not included and function was not fully tested. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. No footswitch included one was used for testing. Sony LCD Monitor x Both the colour LCD monitors power up and the menus and function keys are working fine. The monitors were tested on a stack system and very good quality image were displayed. Both units are in good cosmetic and physical condition. Model No. LMD -2140MD ERBE 200 Diathermy with Footswitch Footswitch The ICC 200 power up and system self-test completed ok. The numerical displays, mode selectors and power output selectors are in good working order. The unit was tested with ESU analyser and Coag and bipolar measured values were within limit. The cut mode measured values were slight lower than expected. The patient plate monitoring circuit is working fine and footswitches are functional. Unit is in good physical condition. Kowa Portable Slitlamp SL-14 The charger / base unit powers up but the bulb in the main slit lamp does not power up. The optics is clear but the main body of the slit lamp has sustained a few cracks. Otherwise the unit is in satisfactory physical condition. Lot 668 Accessories: Valley Lab Force EZ Diathermy on Trolley and Footswitch Monopolar footswitch set x2 Bipolar footswitch x1 Valleylab Trolley Page 33 6

34 Lot 672 Datex Ohmeda Aestiva 5 Anaesthetic Machine The system powered up fine and completed self initialisation successfully. The ventilation monitor is missing a number of pixels, which might affect reading, the monitoring display is in good condition, soft keys are slightly worn, as is the rotating knob when pushed. The monitor support arm is noisy when moved. Available ventilation modes include Volume and Pressure controlled, SIMV, and PSVPro mode. Medical gas hoses, scavenging system, and CO2 absorber are included and appear to be in good condition. The Flowmeter assembly, patient breathing system, and bellows are in tact. The system was tested with a test lung, the Minute Volume was checked against the frequency and was found to be within limits.a module rack is present, modules and accessories are not included. The back up battery was working at the time of testing. Overall the system is in satisfactory physical condition. Lot 673 Datex Ohmeda Aestiva 5 Anaesthetic Machine The system powered up fine and completed self initialisation successfully, both displays are in good condition and functional, some pixels are missing on the ventilation monitor. The monitor support arm is functional but noisy when moved. Rotating knob and soft keys are all functional. Available ventilation modes include Volume and Pressure controlled, SIMV, and PSVPro mode. Medical gas hoses and CO2 absorber are included and appear to be in good condition. The Flowmeter assembly, patient breathing system, and bellows are in tact. The system was tested with a test lung, the Minute Volume was checked against the frequency and was found to be within limits. A Module rack is present, no modules or accessories included. The back up battery was working at the time of testing. Overall the system is in satisfactory physical condition. Lot 675 Storz Stack System with Sony Trinitron Monitor, Storz Endoflator , All units power on, The CRT Monitor is in good condition. The uterine balloon therapy unit appears to be in tact. No compatible camera was present, therefore the image quality was not checked. Printers and Recorder also appeared to be in tact, but also not fully tested. Lot 678 Associated Equipment: Accessories: Software: ERBE ICC 200 Diathermy with Foot Switch and APC 300 Erbe APC 300 Footswitch Trolley Bipolar cable x1 Patient plate cable x2 V2.20 Page 34 6