flare MOVE Relay modules Modular design H 10/02
|
|
|
- Tiffany Pierce
- 5 years ago
- Views:
Transcription
1 flare MOVE Relay modules Modular design H 10/02
2 Relay modules flare MOVE Plug-in relays Overall width: 15.8 mm plug-in relay single changeover contact / 2 changeover contact Dimensions (mm): B x H x T 15.8 x 78.6 x 76 Coil voltage 12 V AC/DC Output 250 V AC / 10 A L, w Coil voltage 24 V AC/DC Output 250 V AC / 8 A 2 Changeover contact L, w Description Type Part No. Box Qty Type Part No. Box Qty Relay module 12V DC; 1U; AgNi; 10A Flare move 12DC1W10A Relay module 12V AC; 1U; AgNi; 10A Flare move 12AC1W10A Relay module 24V DC; 2U; AgNi; 8A Flare move 24DC2W8A Relay module 24V AC; 2U; AgNi; 8A Flare move 24AC2W8A Relay module 115V AC; 1U; AgCdO; 16A Relay module 230V AC; 2U, AgNi; 10A Coil side (same for both contact materials) DC AC DC AC Nominal operating voltage 12 V DC 12 V AC 24 V DC 24 V AC Maximum operating voltage 21 V DC 13.2 V AC 42 V DC 26.4 V AC Minimum operating voltage 8.8 V DC 9.6 V AC 17.5 V DC 19.2 V AC Nominal input current 41 ma 90.5 ma 22.2 ma 46 ma Nominal input capacity 0.5 W 1.2 VA 0.5 W 1.2 VA Operating range ( ) U N ( ) U N ( ) U N ( ) U N Connectable via plug-in jumper 8 Modules 8 Modules Status display LED green LED green Switching characteristics AgNi AgNi Maximum switching voltage 400 V AC* 250 V AC Nominal switching voltage 250 V AC 250 V AC Maximum switching current 10 A AC/DC 8 A Maximum switching capacity AC VA 2000 VA Maximum starting current 20 A (0.5 sec.) 15 A (0.5 sec.) Pickup/dropout delay (including chatter) 15 ms / 12 ms 15 ms / 12 ms Maximum switching frequency 10 Hz (without load); 0.5 Hz (at full load) 10 Hz (without load); 0.5 Hz (at full load) Contact material AgNi AgNi Minimum switchable voltage 5 V AC/DC 5 V AC/DC Minimum switchable current 5 ma AC/DC 5 ma AC/DC Minimum switching capacity 300 mw 300 mw Mechanical endurance AC/DC 2 x x x 10 7 Electrical endurance AC 1 2 x x x 10 5 Rated voltage 250 V 250 V Isolation voltage of input/output 3.6 kv eff. / kv eff. / 2 Overvoltage category III III Degree of pollution 3 2 Ambient temperature 40 C C 40 C C Storage temperature 40 C C 40 C C Protection type/mounting rail IP 20 / TS35 IP 20 / TS35 Emitted interference/interference immunity Wire range of screw terminal: finely stranded/single core 0.25 mm 2 4 mm 2 / 0.25 mm 2 6 mm mm 2 4 mm 2 / 0.25 mm 2 6 mm 2 Relay type Relay 12 V DC; ; AgNi; 10 A Screw holder for operating voltage 12 V DC Relay 12 V AC; ; AgNi; 10 A Screw holder for operating voltage 12 V AC Relay 24 V DC; 2 Changeover contact; AgNi; 8A Screw holder for operating voltage 24 V AC Relay 24 V AC; 2 Changeover contact; AgNi; 8 A Screw holder for operating voltage 24 V AC Accessories Type Part No. Box Qty Type Part No. Box Qty Variclip (plastic, black), retaining clip VARICLIP VARICLIP Retaining clip (metal) METALL METALL Comb shaped jumper for linking terminals A1, A2, continous current 10A KB SF KB SF Marker tag (plastic, white) BZ SF BZ SF * for 400 V applications, requirements for pollution degree 2 are met. Subject to change without further notice
3 flare Overall width: 15.8 mm plug-in relay single changeover contact / 2 changeover contact Dimensions (mm): B x H x T 15.8 x 78.6 x 76 Coil voltage 115 V AC Output 250 V AC / 16 A L, w Coil voltage 230 V AC Output 250 V AC / 10 A L, w Description Type Part No. Box Qty Type Part No. Box Qty Relay module 12V DC; 1U; AgNi; 10A Relay module 12V AC; 1U; AgNi; 10A Relay module 24V DC; 2U; AgNi; 8A Relay module 24V DC; 2U; AgNi; 8A Relay module 115V AC; 1U; AgCdO; 16A Flare move 115AC1W Relay module 230V AC; 2U, AgNi; 10A Flare move 230AC1W Coil side Nominal operating voltage 115 V AC (50/60 Hz) 230 V AC (50/60 Hz) Maximum operating voltage 121 V AC 253 V AC Minimum operating voltage 88 V AC 184 V AC Nominal input current 10.1 ma 6 ma Nominal input capacity 1.2 VA 1.2 VA Operating range ( ) U N ( ) U N Connectable via plug-in jumper 8 Modules 8 Modules Status display LED green LED green Switching characteristics AgCdO AgNi Maximum switching voltage 400 V AC* 400 V AC* Nominal switching voltage 250 V AC 250 V AC Maximum switching current 16 A** 10 A Maximum switching capacity AC VA 2500 VA Maximum starting current 30 A (0.5 sec.) 20 A (0.5 sec.) Pickup/dropout delay (including chatter) 15 ms / 12 ms 15 ms / 12 ms Maximum switching frequency 10 Hz (without load); 0.5 Hz (at full load) 10 Hz (without load); 0.5 Hz (at full load) Contact material AgCdO AgNi Minimum switchable voltage 10 V AC/DC 5 V AC/DC Minimum switchable current 5 ma AC/DC 5 ma AC/DC Minimum switching capacity 500 mw 300 mw Mechanical endurance AC/DC 1 x x x x 10 7 Electrical endurance AC 1 1 x x x 10 5 Rated voltage 250 V 250 V Isolation voltage of input/output 3.6 kv eff. / kv eff. / 3 Overvoltage category III III Degree of pollution 3 3 Ambient temperature 40 C C 40 C C Storage temperature 40 C C 40 C C Protection type/mounting rail IP 20 / TS35 IP 20 / TS35 Emitted interference/interference immunity Wire range of screw terminal: finely stranded/single core 0.25 mm 2 4 mm 2 / 0.25 mm 2 6 mm mm 2 4 mm 2 / 0.25 mm 2 6 mm 2 Relay type Relay 115 V AC; ; AgCdO; 16 A Screw holder for operating voltage 115 V AC Relay 230 V AC; 2 Changeover contact; AgNi; 10 A Screw holder for operating voltage 230V AC Accessories Type Part No. Box Qty Type Part No. Box Qty Variclip (plastic, black), retaining clip VARICLIP VARICLIP Retaining clip (metal) METALL METALL Comb shaped jumper for linking terminals A1, A2, continous current 10A KB SF KB SF Marker tag (plastic, white) BZ SF BZ SF Subject to change without further notice * for 400 V applications, requirements for pollution degree 2 are met. ** rated values: 10 A V with a current > 10 A, the contact terminal must be connected in parallel (21 with 11, 24 with 14, 22 with 12) 3
4 Relay modules flare MOVE Plug-in relays Overall width: 6,2 mm Plug-in Dimensions (mm): B x H x T 6.2 x 88 x 76 Coil voltage 12 V DC; AC/DC Output 250 V AC / 6 A E, w Coil voltage 24 V DC; AC/DC Output 250 V AC / 6 A E, w Description + Au (5 µ) Box Qty + Au (5 µ) Box Qty 12 V Relay module DC V Relay module DC V Relay module AC / DC V Relay module AC / DC Coil side Nominal operating voltage 12 V DC 12 V AC / DC 24 V DC 24 V AC / DC Maximum operating voltage 14.4 V DC 13.2 V AC / DC 28.8 V DC 26.4 V AC / DC Minimum operating voltage 9.8 V DC 9.8 V AC / DC 18.2 V DC 19.2 V AC / DC Nominal input current 15.2 ma 19 ma 9.4 ma 12 ma Nominal input capacity AC / DC 0.2 W 0.25 V A 0.23 W 0.3 V A Operating range ( ) U N ( ) U N ( )U N ( ) U N Connectable via plug-in jumper 20 Modules 20 Modules Status display LED green LED green Switching characteristics + Au (5 µ) + Au (5 µ) Maximum switching voltage 400 V AC 400 V AC Nominal switching voltage 250 V AC 250 V AC Maximum switching current 6 A AC / DC 6 A AC / DC Maximum switching capacity 1500 V A / 150 W 1500 V A / 150 W Maximum starting current 30 A (0.5 sec.) 30 A (0.5 sec.) Pickup/dropout delay (including chatter) 7 ms / 11 ms 7 ms / 11 ms Maximum switching frequency 20 Hz (without load); 0.1 Hz (at full load) 20 Hz (without load); 0.1 Hz (at full load) Contact material + Au (5 µ) + Au (5 µ) Minimum switchable voltage 12 V AC / DC 5 V AC / DC 12 V AC / DC 5 V AC / DC Minimum switchable current 10 ma AC / DC 2 ma AC / DC 10 ma AC / DC 2 ma AC / DC Minimum switching capacity 500 mw 50 mw 500 mw 50 mw Mechanical endurance 1 x x 10 7 Electrical endurance at 230 V AC / 6 A 6 x x 10 4 Rated voltage 250 V 250 V Isolation voltage of input/output 4 kv eff. 4 kv eff. Overvoltage category III (in accordance with HD 625.1S1) III (in accordance with HD 625.1S1) Degree of pollution 2 (in accordance with HD 625.1S1) 2 (in accordance with HD 625.1S1) Ambient temperature 0 C C 0 C C Storage temperature 40 C C 40 C C Protection type/mounting rail IP 20 / TS35 IP 20 / TS35 Emitted interference/interference immunity Wire range of screw terminal: finely stranded/single core 0.14 mm mm 2 / 0.5 mm mm mm mm 2 / 0.5 mm mm 2 Accessories Relay type Part No. Box Qty Relay type Part No. Box Qty Screw holder for operating voltage (6/12/24) V DC 12 or 24 V DC or 24 V DC Screw holder for operating voltage (6/12/24) V AC/DC 12 or 24 V DC or 24 V DC Screw holder for operating voltage (48/60) V AC/DC 60 V DC V DC Screw holder for operating voltage ( ) V AC/DC 60 V DC V DC Screw holder for operating voltage ( ) V AC/DC 60 V DC V DC Insulation plate IP SF IP SF Comb shaped jumper for linking the terminals, continous current 36 A KB SF KB SF Marker tag (plastic, white) BZ SF BZ SF Marker plate BM SF BM SF V DC Relay V DC Relay V DC Relay 4 Subject to change without further notice
5 flare Overall width: 6.2 mm Plug-in Dimensions (mm): B x H x T 6.2 x 88 x 76 Coil voltage 115 V AC/DC Output 250 V AC / 6 A E, w Coil voltage 230 V AC/DC Output 250 V AC / 6 A E, w Description + Au (5 µ) Box Qty + Au (5 µ) Box Qty 115 V AC/DC Relay module V AC/DC Relay module Coil side Nominal operating voltage 115 V AC/DC (50/60 Hz) 230 V AC/DC (50/60 Hz) Maximum operating voltage 138 V 264 V Minimum operating voltage 88 V 184 V Nominal input current 5 ma 4 ma Nominal input capacity 0.9 VA 0.9 VA Operating range ( ) U N ( ) U N Connectable via plug-in jumper 20 Modules 20 Modules Status display LED green LED green Switching characteristics + Au (5 µ) + Au (5 µ) Maximum switching voltage 400 V AC* 400 V AC* Nominal switching voltage 250 V AC 250 V AC Maximum switching current 6 A 6 A Maximum switching capacity AC VA 1500 VA Maximum starting current 10 A (0.5 sec.) 10 A (0.5 sec.) Pickup/dropout delay (including chatter) 7 ms / 11 ms 7 ms / 11 ms Maximum switching frequency 10 Hz (without load); 0.5 Hz (at full load) 10 Hz (without load); 0.5 Hz (at full load) Contact material + Au (5 µ) + Au (5 µ) Minimum switchable voltage 12 V 5 V 12 V 5 V Minimum switchable current 10 ma 2 ma 10 ma 2 ma Minimum switching capacity 500 mw 50 mw 500 mw 50 mw Mechanical endurance AC/DC 1 x x 10 7 Electrical endurance AC 1 6 x x 10 4 Rated voltage 250 V 250 V Isolation voltage of input/output 4 kv eff. / 3 4 kv eff. / 3 Overvoltage category III III Degree of pollution 3 3 Ambient temperature 40 C C 40 C C Storage temperature 40 C C 40 C C Protection type/mounting rail IP 20 / TS35 IP 20 / TS35 Emitted interference/interference immunity Wire range of screw terminal: finely stranded/single core 0.25 mm mm 2 / 0.25 mm mm mm mm 2 / 0.25 mm mm 2 Accessories Relay type Part No. Box Qty Relay type Part No. Box Qty Screw holder for operating voltage (6/12/24) V DC 12 or 24 V DC or 24 V DC Screw holder for operating voltage (6/12/24) V AC/DC 12 or 24 V DC or 24 V DC Screw holder for operating voltage (48/60) V AC/DC 60 V DC V DC Screw holder for operating voltage ( ) V AC/DC 60 V DC V DC Screw holder for operating voltage ( ) V AC/DC 60 V DC V DC Insulation plate IP SF IP SF Comb-shaped jumper for linking the terminals A1, A2 20 poles KB SF KB SF Marker tag (plastic, white) BZ SF BZ SF Marker plate BM SF BM SF V DC Relay 24 V DC Relay 60 V DC Relay (für 115 V / 230 V Relay module) V DC Relay (für 115 V / 230 V Relay module) Subject to change without further notice * for 400 V applications, requirements for pollution degree 2 are met. 5
6 flare MOVE Relay modules Plug-in relays Wiring diagrams: flare MOVE Mechanical relay modules 12 V DC Relay Part No V AC Relay Part No V DC Relay Part No V AC Relay Part No V AC Relay Part No V AC Relay Part No Dimensions 6 Subject to change without further notice
7 flare Wiring diagrams: flare MOVE Mechanical relay modules 12 V DC; AC/DC Relay Part No Part No V DC; AC/DC Relay Part No Part No V AC/DC Relay Part No Part No V AC/DC Relay Part No Part No Dimensions Subject to change without further notice 7
8 Headquarter: Wieland Electric GmbH Brennerstraße D Bamberg Sales and Marketing Center: Wieland Electric GmbH Benzstraße 9 D Bamberg Phone +49 (0) 9 51/ Fax +49 (0) 9 51/ info@wieland-electric.com DIN rail terminal blocks with screw connection with spring connection with IDC connection Terminal blocks for electrical installations with screw connection with spring connection Lighting and appliance terminals Terminal strips PC board connectors modular/pluggable insulated headers rising cage clamp/ plug connectors TOP connection spring connection electronics housings Electronics components relay modules solid-state modules interface modules function modules Power Supplies Fieldbus components motor starter power bus distributed I/Os Systems for electrical installation Mains connectors Bus connectors Compact connectors Low voltage connectors Flat cable systems Distribution systems EIB switching devices Product Range Multipole connectors Multipole adapter EExi Data cablefeed-through Connectors with mixed contacts
Coupling relays. The safe way to achieve a perfect interface in process applications. interface flare
interface The safe way to achieve a perfect interface in process applications. In the microchip age of bits and bytes, one might assume that there is no place left for electromechanical relays. Far from
selos The Wieland Terminal. selos New Generation Wieland Electric, inventor of the safe connection. Fast on the Rail
The Wieland Terminal. selos New Generation Wieland Electric, inventor of the safe connection. Fast on the Rail selos DIN rail terminal blocks with screw connection Reliable connection, proven concept!
gesis IP+ Installation System in IP IP 68 For use in rough environments Excerpt from the product range MC 04/07
gesis IP+ Installation System in IP 6... IP 68 For use in rough environments Excerpt from the product range 0162.6 MC 04/07 Areas gesis IP+ For electrical installations with increased requirements for
samos Product Range samos Modular Electronic Safety System
Sales and Marketing Center: Wieland Electric GmbH Benzstraße 9 D-96052 Bamberg Phone +49 (9 51) 93 24-0 Fax +49 (9 51) 93 24-1 98 www.wieland-electric.com www.gesis.com www.gesis-network.com info@wieland-electric.com
Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
safety Safety Products Safety for all applications E 03/07 Downloaded from Elcodis.com electronic components distributor
safety Safety Products Safety for all applications 0152.5 E 03/07 Safety switching devices from Wieland Electric Wieland Electric provides safety switching devices for all daily industrial use applications.
Control elements. Fine adjustment. Status indication. 24 V DC typ. 0,25 W / 0,25 VA. 24 V DC typ. 0,03 W / 0,09 VA. 0,15 3 s. 0,5 10 h.
On-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status
VEO. V2ZR V AC/DC Art.Nr.: V2ZR10P V AC/DC Art.Nr.: TECHNICAL DATA
Off-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5 mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status
VEO. V2ZS V AC/DC Art.Nr.: V2ZS20P V AC/DC Art.Nr.: TECHNICAL DATA
4 time ranges 4 transition times Supply voltage 12-240V AC/DC 2 normally open contacts Width 22,5 mm Control elements Fine adjustment star contactor Setting of time range star contactor Transit time Status
RUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future.
gesis FLEX gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future. 2 gesis FLEX Room automation of the future Decentralized room automation with gesis FLEX In terms of flexibility,
VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
Interface Relay CRINT-1x
Interface Relay CRINT-1x 1 Features Space saving interface relay to combine with PLCs Coil voltage UC12, 24, 48, 60, 110-125, 220-240V Integrated protection circuit Relay is replaceable separately Available
1.5 Solid State Relays
Relays.. Solid State Relays Application s Pins Contacts AC ratings DC ratings Socket CSS Series AC Solid state, Instantaneous switching CSS-I A / 0 V S0 AC Solid state synch. to zero crossing CSS-Z A /
revos revos Industrial Multipole Connectors 3 48 pole in metal housing Program for Tough Tasks
revos Industrial Multipole Connectors 3 8 pole in metal housing Program for Tough Tasks Heavyduty industrial plug connectors for all applications The heavyduty industrial plug connectors revos are classified
R15 industrial relays of small dimensions
R15 127 R15 2 C/O R15 3 C/O R15 4 C/O Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated
Slim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
VEO. V2UF230V10 Art.Nr.: TECHNICAL DATA
Continous voltage monitoring Mains fluctuation detection Detects voltage drop / short interruptions of at least 10ms Prevents undefined states in switching and control systems Generates reset pulse after
40 Series - Miniature PCB/Plug-in relays A. 3.5 mm contact pin pitch 1 Pole 10 A PCB or 95 series sockets.
40 Series - Miniature PCB/Plug-in relays 8-10 - 12-16 40 1 & 2 Pole relay range 40.31-1 Pole 10 (3.5 mm pin pitch) 40.51-1 Pole 10 (5 mm pin pitch) 40.52-2 Pole 8 (5 mm pin pitch) PCB mount - direct or
VEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
DEK-REL- 5/I/1. Extract from the online catalog. Order No.:
Extract from the online catalog DEK-REL- 5/I/1 Order No.: 2941183 The illustration shows the version DEK-REL- 24/I/1 Relay terminal block, with soldered-in miniature relays, contact (AgNi +Au): small to
70 SERIES. Line monitoring relay
70 SRIS 70 SRIS lectronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window Mode, Phase
MODULES FOR SAFETY AND MONITORING
MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel. ++4 6 / 466 33 33, Fax ++4 6 / 46 96 06 http://www.woertz.ch Woertz-USA 5 Discovery Drive,
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
gesis LINECT Universal Connector System for Recessed Luminaires State-of-the-Art Standard
gesis LINECT gesis LINECT Universal Connector System for Recessed Luminaires State-of-the-Art Standard gesis LINECT components Pluggability for more light Bringing plug and play to lighting installation
RUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
34 SERIES. Slim electromechanical PCB relays 6 A Ultra-slim 1 Pole - 6 A relay
34 Slim electromechanical PCB relays 6 34 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in terminal sockets 34.51 34.51-5010
Miniature PCB Relays A
SЕRIES Miniature PCB Relays 8-10 - 12-16 Medical and dentistry Control panels Panels for electrical distribution Toys utomation for blinds, grilles and shutters Door and gate openers Electronic circuit
RUC-M industrial relays for DC loads
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity
Pluggable interface relays and optocouplers CR-P Pcb relays, optocouplers and accessories
Data sheet Pluggable interface relays and optocouplers CR-P Pcb relays, optocouplers and accessories Pluggable interface relays and optocouplers are used for electrical isolation, amplification and signal
PSR-SCP- 24DC/URM4/4X1/2X2/B PSR-SPP- 24DC/URM4/4X1/2X2/B
Safety Relay as a Contact Extension Block INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- 24DC/URM4/4X1/2X2/B safety relay can be used as a contact extension block in safety circuits
RUC industrial relays of small dimensions
with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston
Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories
Data sheet Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories Boxed interface relays and optocouplers are used for electrical isolation, amplification and signal
4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
RM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
Accessories for pluggable interface relays CR-P Sockets
Data sheet Accessories for pluggable interface relays CR-P Sockets Characteristics Logical and standard socket for pluggable interface relays CR-P Snap-on mounting on DIN rail Connector for pluggable function
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
RM35UB3. Product data sheet Characteristics. voltage control relay RM35-U - range V AC. Main. Complementary
Characteristics voltage control relay RM35-U - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
PSR-SCP- 24DC/SSM/2X1 PSR-SPP- 24DC/SSM/2X1
PSR-SCP- DC/SSM/2X1 PSR-SPP- DC/SSM/2X1 Safety Relay With Downtime Monitoring INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- DC/SSM/2X1 safety relay can be used in safety circuits
wienet VPN industrial router Telecontrol, remote maintenance and alarm - simply and safely Managing from a distance.
VPN industrial router Telecontrol, remote maintenance and alarm - simply and safely Managing from a distance. Applications Energy systems Wind turbines Solar farms Biogas cogeneration systems Heat pumps,...
RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.
Characteristics voltage control relay RM17-U - range 9..15 V DC Price* : 70.64 GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
Switching relay CT-IRS with 1, 2 or 3 c/o contacts Data sheet
1SVR 430 221 F7300 2 1 3 Characteristics Switching relay ON-delay approx. 10 ms 1, 2 or 3 c/o contacts Switching relay with gold-plated contacts Width 22.5 mm Approvals e f GOST CCC CT-IRS 1 U/R: green
RM17UB3. Product data sheet Characteristics. voltage control relay RM17-U - range V AC. Main. Complementary
Characteristics voltage control relay RM17-U - range 183..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay
RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA
Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
PLC-RSC- 24DC/ Extract from the online catalog. Order No.:
Extract from the online catalog PLC-RSC- 24DC/21-21 Order No.: 2967060 PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with power contact,
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
MINI MCR-SL-UI-2I-NC. Extract from the online catalog. Order No.:
Extract from the online catalog MINI MCR-SL-UI-2I-NC Order No.: 2864176 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration
Semiconductor relay, 2-conductor technology Switching element DC 30 V, 100 ma, wide-range input Screw-/ Spring terminal
DC 30 V, 100 ma, wide-range input Nominal voltage AC/DC 110 230 V 760307 OT 6-0307 AC/DC 110 230 V 5 Nominal voltage AC/DC 110 230 V 761307 OT 6-1307 AC/DC 110 230 V 5 AC/DC 110 230 V voltage range 77.0
PSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B
PSR-SCP- 24DC/SDC4/2X1/B PSR-SPP- 24DC/SDC4/2X1/B Safety Relay for Emergency Stop and Safety Door Circuits INTERFACE Data Sheet 102858_02_en PHOENIX CONTACT - 12/2006 Description The PSR-...- 24DC/SDC4/2X1/B
ETD-BL-1T-230(-PT) Multifunctional time relay with various functions and adjustable times. Data sheet. 1 Description
(-PT) Multifunctional time relay with various functions and adjustable times Data sheet 106395_en_02 PHOENIX CONTACT 20-06-08 1 Description Requirements pertaining to safety and system availability increase
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
MINI MCR-SL-UI-REL(-SP)
Configurable Threshold Value Switch Data Sheet 11/2004 Method of Operation The configurable 3-way threshold value switch MINI MCR-SL-UI-REL(-SP) is used to control and monitor analog standard signals.
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
Slim Relay G2RV. Model Number Structure. Model Number Legend. The World's First Industrial Slim Relay NTLP: WAITING FOR @
Slim Relay 2R The World's First Industrial Slim Relay arge plug-in terminals for easy connection. ED indicator and mechanical flag to check operation. Transparent housing enables checking relay condition.
PI84 with socket GZM80 interface relays
RM84 + GZM80 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) Min. switching current Max. inrush current Rated current
Pluggable interface relays CR-P Pcb relays
Data sheet Pluggable interface relays CR-P Pcb relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable
Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F Approvals a culus f CCC CT-BS Circuit diagram Marker label Marks g c CE C-Tick Order data
Accessories for pluggable interface relays CR-M Sockets
2CDC 292 072 F0004 2CDC 291 0 F0004 2CDC 291 004 F0005 2CDC 291 042 F0004 CR-M4LS CR-M4LC CR-M4SS CR-MH Features Logical and standard socket for interface relays CR-M Snap-on mounting on DIN rail Width
Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in prom design. It is intended for installation in the distribution board on 35 mm mounting rails.
PLC-RSC- 24UC/21. Extract from the online catalog. Order No.:
Extract from the online catalog PLC-RSC- 24UC/21 Order No.: 2966184 The illustration shows the version PLC-RSC-24DC/21 PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and
02/11/2015
35 mm - 1 Relay 8A OUR1 Part number 88867105 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
Switching and controlling in the switch cabinet
Switching and controlling in the switch cabinet Relays Opto-coupler Solid state relays Intelligent interface technology 02 03 MIRO INTERFACE TECHNOLOGY MINIMUM SPACE MAXIMUM FUNCTIONALITY Application areas
RM35TF V AC
Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
safety Product Range Safe System Solutions for Automation Technology
Headquarters: Wieland Electric GmbH Brennerstraße 10 14 D-96052 Bamberg Sales and Marketing Center: Wieland Electric GmbH Benzstraße 9 D-96052 Bamberg Phone +49 9 51 9324-0 Fax +49 951 9324-198 www.wieland-electric.com
Double-deck terminal block; Through/through terminal block; L/L; gray housing
0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Item No: 870-0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Marking Business data Supplier
RM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
Pluggable interface relays CR-M Miniature relays
Data sheet Pluggable interface relays CR-M Miniature relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC
RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA 250 V AC
Characteristics phase control relay RM17-T - range 183..484 V AC Complementary Maximum switching voltage Minimum switching current [Us] rated supply voltage Supply voltage limits Control circuit voltage
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules 39 SERIES Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention
PLC-RSC- 24DC/21. Extract from the online catalog. Order No.:
Extract from the online catalog PLC-RSC- 24DC/21 Order No.: 2966171 The illustration shows the version PLC-RSC-24DC/21 PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and
Relay actuators & Status indicating modules
19 SЕRIES Relay actuators & Status indicating modules Panels for electrical distribution FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage
RM84 / RM85 / RM87 Miniature Electromagnetic Relays
Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Product datasheet Characteristics OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication
RM35JA32MR Current control relay 0.15A 15A, 2 C/O
Characteristics Current control relay 0.15A 15A, 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay type Switching capacity in VA Measurement
OTB1C0DM9LP I/O distributed module OTB - CANopen bus m
Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Main Range of product Product or component type Integrated connection type Bus type Jan 28, 2018 Modicon OTB I/O distributed module
Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages The CM-ESS.1 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
CONTROL PANEL COMPONENTS CONTROL PANEL SOLUTIONS
PRODUCT PROFILE Automation Industrial applications CONTROL PANEL COMPONENTS CONTROL PANEL SOLUTIONS www.finder-us.com The Company...An Italian Brand with global presence FINDER S.p.A. - Global Headquarters
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
OTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m
Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Complementary Topology Bus length Main Number of devices per segment 0...32 Data format Parity Discrete input voltage
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
XC-CPU-201 XC-CPU-201-XV
/ XC-CPU- XC-CPU--XV Ethernet integrated The / MBit Ethernet interface of the XC offers the perfect link to IT communication. Whether you need rapid access to programs, high-speed data exchange between
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
REL-MR- 12DC/ Extract from the online catalog. Order No.: Pluggable miniature relays, with power contact, 2 PDT, input voltage 12 V DC
Extract from the online catalog REL-MR- 12DC/21-21 Order No.: 2961257 Pluggable miniature relays, with power contact, 2 PDT, input voltage 12 V DC Commercial data EAN 4017918163525 Pack 10 pcs. Customs
Bulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
PHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
IB IL 24/48 DOR 2/W-XC-PAC
Inline digital output terminal, version for extreme conditions, 2 relay PDTs Data sheet 8463_en_01 PHOENIX CONTACT 2015-08-12 1 Description The terminal is designed for use within an Inline station. It
RINT. Phone: Fax: Web:
RINT RINT Relay and Accesories Part Number Key Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified. RINT interface relays consist of two components:
RM35TF. Main. Product or component type. Product specific application. Relay monitored parameters 250 V AC 5 A AC
Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
selos selos DIN Rail Terminal Blocks with Screw Connection Professional Screw Technology
selos DIN Rail Terminal Blocks with Screw Connection Professional Screw Technology 1 Sales and Marketing Center in Bamberg Photo of the Bamberg headquarters STOCKO headquarters in Wuppertal automation
NEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
Zelio Relay - plug-in relays
Presentation Presentation offer the advantages of compact size and modular design: their slim width ( mm) saves space when mounting on a rail at the back of an enclosure. RSL relays are available in two
PLC-RSC- 24DC/21 Order No.:
Typical release time Operating voltage display Name of protection Protective circuit/component 8 ms Yes Polarity protection Polarity protection diode Contact side Contact type Contact material Maximum
RM35LM33MW liquid level control relay RM35-L V AC/DC
Characteristics liquid level control relay RM35-L - 24..240 V AC/DC Complementary reset time maximum switching voltage Main range of product product or component type relay type relay name relay monitored
Micro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
TABLE OF CONTENTS Bulletin 700-HA General Purpose Relays and Timing Relays. Description Page Description Page. Description
9 Bulletin 700-HA Bulletin 700-HA 10 A Rating DPDT 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Finger Grips for Easy Installation and Removal Optional Manual Operator Optional Pilot Light Optional
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
Slim Relay G2RV. Features. Test switch operation. Protection cover: lock. Protection cover: unlock. Protection cover open. Protection cover close
Slim Relay GRV The only truly industrial 6 mm relay Lockable test switch models now available. Large plug-in terminals for reliable connection. LED indicator and mechanical flag for status indication.