Drawings. Model UT35A Digital Indicating Controller (UT35A-NNN-xx-xx/x) SD 05P01D41-05EN. External Dimensions. Panel Cutout Dimensions.

Transcription

1 Drawings SD PD-EN Model A Digital Indicating Controller (A-NNN-xx-xx/x) [Style: S] External Dimensions Unit: mm (approx. inch) 96 (.78) (.) 6 (.6) Bracket Terminal cover (.79) 96 (.78) 9.6 (.6) 9.6 (.7). (.) Bracket to mm (. to.9 inch) (panel thickness) Panel Cutout Dimensions General mounting 7 (.6) min. Side-by-side close mounting [(N ) 96+9] +.8 ([(N-).78+.6] ) (.6 ) () (.9) (.6 ) min. (.7) N stands for the number of controllers to be installed. However, the measured value applies if N (.6 ) () (.98) tolerance: ±(value of JIS B -998 tolerance grade IT8) / SD PD-EN rd Edition: Aug. (YK) P-

2 Terminal Wiring Diagrams Control output O (Suffix code: Output ; -T) E-terminal area - - PV input TC input Current (ma) input (Suffix code: Output =-P) Position proportional control output VALV Relay output HIGH (direct) LOW (reverse) Triac output Contact output ALM (Equipped as standard) External output (relay) Alarm- output (PV high limit) Alarm- output ( PV low limit) Alarm- output PV high limit Contact rating: V AC, A V DC, A (resistance load) AL AL AL Relay rating: V AC, A V DC, A (resistance load) Power supply - V AC power supply N L Triac Contact rating: 7 - V AC Allowable load current:.8 A Allowable range: - V AC (±%) (free voltage) /6 Hz shared (Suffix code: Output ; -R or -U and Output ; N or A) Relay output NC Feedback input % % Contact rating: V AC, A V DC, A (resistance load) Heating/cooling control output (Suffix code: Output and Output ; -UU, -UR, -RU or -RR. Terminal has no function in -AU and -AR.) O O Heating/cooling relay output Cooling -side Heating -side Contact rating: V AC, A V DC, A (resistance load) V AC/DC power supply N L Resistance: Ω to. kω Feedback input Current (ma) input + - PV (Equipped as standard) RTD input Voltage (mv, V) input A b B Factory default: PV input type is undefined. ( V AC/DC power supply: Optional suffix code /DC) CAION Do not use a - V AC power supply for the V AC/DC model; otherwise, the instrument will malfunction. When feedback input is current E-terminal area (Optional suffix code /RT) Retransmission output (Suffix code: Output ; A or U) Cooling-side control output Current/voltage pulse output RET/O - ma DC, - ma DC, Voltage pulse (V) 6 RET Retransmission output V DC loop power supply Default: PV retransmission - ma DC or.-8. V DC - ma DC (Max. ma DC) 6 6 Load resistance 6 Ω or less Default: - ma DC Contact input DI (Equipped as standard) No-voltage Transistor STOP when DI=ON DI DI RUN when DI=OFF DI AO when DI=ON DI MAN when DI=OFF Contact rating: V DC, ma or more Heater break alarm HBA (Optional suffix code /HA) External output (transistor) Heater current detection input Heater break alarm- HAL output CT Heater break alarm- HAL output CT Transistor rating: V DC, ma Can not be used for retransmission output or V DC loop power supply when current/voltage pulse output is used. Can be used for retransmission output or V DC loop power supply when control output is not used. Current output range can be changed. (Suffix code: Output ; -A or -U) Control output O Current/voltage pulse output Retransmission output Default: Undefined 7 - ma DC, 7 - ma DC, - ma DC, Voltage pulse ( V) - ma DC Default: - ma DC V DC loop power supply V DC (Max. ma DC) Can be used for retransmission output or V DC loop power supply when current/voltage pulse output is not used for control output. Current output range can be changed. In Position proportional type, can be used for retransmission output or V DC loop power supply. All Rights Reserved. Copyright 9-, Yokogawa Electric Corporation. SD PD-EN rd Edition Aug., -

3 Terminal Wiring Diagrams (E-Terminal Area) Contact input DI (Optional suffix code /X) No-voltage Transistor DI DI DI DI DI Contact rating: V DC, ma or more DI DI DI DI DI Function can be assigned to the terminals with no function. Contact output DO (Optional suffix code /Y) External output (transistor) DO DO DO DO DO Transistor rating: V DC, ma Function can be assigned to the terminal with no function. Contact input / Contact output DI/DO No-voltage Transistor DI DI DI DI (Optional suffix code /W) External output DO DO Contact rating: V DC, ma or more Transistor rating: V DC, ma E-terminal area E-terminal area All Rights Reserved. Copyright 9-, Yokogawa Electric Corporation. SD PD-EN rd Edition Aug., -

4 Terminal Wiring Diagrams (E-Terminal Area) E-terminal area - communication RS8 (Optional suffix code /CH) SDB(+) 7 SDA(-) 8 RDB(+) RDA(-) E-terminal area Ethernet communication (with gateway function) BASE-T/BASE-TX RJ connector Upper side LED (baud rate) Color Amber Lit M bps M bps Lower side LED (link activity) Color Lit Blink Green Linked Active Link failure ETHR (Optional suffix code /ET) RSA(-) 8 PROF (Optional suffix code /PD) PROFIBUS-DP communication (with Modbus master) VP RxD/TxD-P RxD/TxD-N DGND SHIELD LED Lit User profile error RDY Communicating (green) successfully ERR Not connected, or communication failure (flashing) VP Data 9Ω line RxD/TxD-P RDY Data Ω ERR line RxD/TxD-N 9Ω DGND bus power Data signal (positive data receive/transmit) Data signal (negative data recive/transmit) Signal ground Shield ground No power, or Communication failure If the is located at the end of a segment for the PROFIBUS terminating resistors are separately needed. These are to be prepared by users. (9 Ω: pcs. Ω: pc., or an active terminator.) RSA(-) 8 DNET (Optional suffix code /DN) DeviceNet communication (with Modbus master) LED MNS (green/ red) CAN_L V- Lit/flashing User profile error MNS CAN_H Ω CAN_L V+ CAN_H DeviceNet power supply V RX/TX + signal DRAIN Shield/Drain wire RX/TX - signal DeviceNet power supply common. Communicating successfully (green, lit). Not connected (green, flashing). Critical link failure (red, lit). Communication timeout (red, flashing) At power-on/communication faulted (green/red, flashing) No electricity If the is located at the end of a segment for the DeviceNet terminating resistors are separately needed. These are to be prepared by users. ( Ω: pc.) RSA(-) 8 CC-L (Optional suffix code /CC) CC-Link communication (with Modbus master) LED L ERR L RUN (green) Lit User profile error/ Address error L ERR L RUN Communication failure (CRC error) Communicating successfully DA DB Ω FG SLD Frame ground Shield DG RX/TX signal ground DB RX/TX- signal DA RX/TX+ signal No carrier detected/ Connection timeout If the is located at the end of a segment for the CC-Link terminating resistors are separately needed. These are to be prepared by users. ( Ω: pc.) RSA(-) 8 All Rights Reserved. Copyright 9-, Yokogawa Electric Corporation. SD PD-EN rd Edition Aug., -

5 Terminal Wiring Diagrams (E-Terminal Area) V DC loop power supply LPS (Optional suffix code /L) V DC loop power supply.6-8. V DC (Max. ma DC) Contact output DO (Optional suffix code /Y) External output DO DO E-terminal area E-terminal area DO DO DO Contact input DI (Optional suffix code /X) No-voltage Transistor DI Transistor rating: V DC, ma DI DI DI DI Function can be assigned to the terminals with no function. DI DI DI DI DI Contact rating: V DC, ma or more Function can be assigned to the terminals with no function. Contact input / Contact output DI/DO (Optional suffix code /W) No-voltage Transistor DI DI DI DI Contact rating: V DC, ma or more External output DO DO Transistor rating: V DC, ma All Rights Reserved. Copyright 9-, Yokogawa Electric Corporation. SD PD-EN rd Edition Aug., - Subject to change without notice.