Accessories Fieldbus Box

Transcription

1 Power cables, sensor cables, connection cables and further accessories see the EtherCAT Box chapter from page 514 Pre-assembled cables for fieldbus components include a wide range of cable assemblies. For clarity, the order numbers are listed without cable length information in the following tables. For detailed ordering information referencing the cable length please see the web pages or the price list. For technical data sheets see PROFIBUS, Modbus, RS232, RS485 Pre-assembled cables for flexible applications Material characteristics Pict. ZK1031-6xxx-1xxx PUR, 2-wire, (2 x 0.25 mm²), shielded, drag-chain suitable, purple A 756 Electrical data Ratings 160 V (according to IEC ) Material outer cladding PUR, inner insulation polyethylene Installation drag-chain suitable DC resistance Ω/km Line capacitance 28.5 nf/km Nominal impedance 150 Ω at 1 MHz Approval UL style vol. 1 sec. 8, RoHS-compliant, halogen-free, flame-resistant Cable, pre-assembled with M12 socket (5-pin/straight) to Pict. ZK xxx B ZK xxx M12 plug (4-pin/straight) C Cable, pre-assembled with M12 socket (5-pin/angled) to Pict. ZK xxx D ZK xxx M12 plug (4-pin/straight), reverse-keyed E Cable, pre-assembled with M12 plug (5-pin/straight) to Pict. ZK xxx F Cable, pre-assembled with M12 plug (5-pin/angled) to Pict. ZK xxx G ZK xxx M12 plug (5-pin/angled) H

2 ZS ZS ZS ZS ZS ZS ZS ZS ZS ZB3200 ZB3300 tee-connector, 12 Mbaud (blue ID ring) tee-connector, 12 Mbaud for the direct connection to the other tee-connectors (yellow ID ring) Y-connector, 12 Mbaud (plug, socket) termination resistor (plug) plug for field assembly socket for field assembly plug for field assembly, angled socket for field assembly, angled control cabinet feed through M12, plug-coupling PROFIBUS cable 12 Mbaud 1 x 2 x 0.64 mm² PROFIBUS cable 12 Mbaud 1 x 2 x 0.64 mm², 5-wires, drag-chain suitable Pict. I J K L M N O P A B C D d = 8.5 mm Sectional view E F G H 757 I J K L M N O P Illustrations similar

3 CANopen, DeviceNet Pre-assembled cables for fixed installation Material characteristics Pict. ZK1052-6xxx-3xxx PVC, 4-wire, (4 x 0.32 mm²), shielded, fixed installation, grey Q Electrical data Ratings 300 V, 80 C Material outer cladding PVC, inner insulation polyethylene Supply cable black, red Data lead blue, white DC resistance Ω/km Line capacitance pf/m Nominal impedance 126 Ω at 1 MHz Approval UL approval, AWM 2476, 80 C, 300 V; CSA AWM I/II A/B, 80 C, 300 V, FT1 Cable, pre-assembled with M12 socket (5-pin/straight) to Pict. ZK xxx R Cable, pre-assembled with M12 socket (5-pin/angled) to Pict. ZK xxx S Cable, pre-assembled with M12 plug (5-pin/straight) to Pict. ZK xxx T ZK xxx M12 socket (5-pin/straight) U ZK xxx M12 socket (5-pin/angled) V Cable, pre-assembled with M12 plug (5-pin/angled) to Pict. ZK xxx W ZK xxx M12 socket (5-pin/angled) X 758 Pict. ZS Y-connector (plug, socket) ZS Y-connector with stub, 1 m (plug, socket) ZS termination resistor (plug, 120 Ω pin 4 5) Y ZS straight socket, screw type connection ZS angled socket, screw type connection ZS straight plug, screw type connection ZS angled plug, screw type connection ZS control cabinet lead-in M12, plug-coupling Z ZS distribution box: 1 x 5-pin plug, 4 x 5-pin socket a Q R S T d = 7.24 mm Sectional view

4 U V W X Y Z Illustrations similar a Technical data Fieldbus CANopen or DeviceNet Bus plug M12 plug, 5-pin, screwed Data transfer rates up to 1 Mbaud (CANopen) or 500 kbaud (DeviceNet) Protection class IP 67 Temperature range C Fieldbus output 126 The following stub lines are not to be exceeded: Fieldbus input Distribution box Status display of DeviceNet supply voltage V+ (optional with CANopen) Baud rates Max. stub length (multidrop) Max. bus length with multidrop technology (without stubs) 1,000 kbaud 0.3 m 25 m 500 kbaud 1.2 m 60 m 250 kbaud 2.4 m 120 m 125 kbaud 4.8 m 310 m

5 IP-Link Cordsets ZK xxx Z1101 Z1103 pre-assembled IP-Link cable, drag-chain suitable plastic fibre optic, single core, 1,000 µm with protective PU cladding and Kevlar strain relief, drag-chain suitable plastic fibre optics, 1,000 µm, PUR sheat ø 6 mm, heavy duty, drag-chain suitable Plug Pict. ZS plug, unit pack 1 b ZS plug, unit pack 10 b ZS IP-Link plug, unit pack 10, clip type c ZK IP-Link jumper d IP-Link accessories ZS mounting plate for Coupler Box, zinc-coated steel sheet, 270 mm ZS sanding gauge for IP-Link connector ZS abrasive paper P600, 10 sheets ZS locking device IP-Link, stainless steel 760 b c d Illustrations similar

6 KS2000 Configuration software KS2000 The KS2000 can be used for parametering modules, local diagnostics, forcing data, monitorig values, updating firmware and programming Beckhoff mini PLCs via TwinCAT. The connection between the fieldbus components and the PC is established via the serial or USB connection cable provided, or via the network and TCP/IP. The KS2000 configuration software for Windows NT/2000/XP/Vista or Windows 7 operating systems has a friendly user interface, making work comfortable and convenient. Pict. KS2000 configuration software for project design, commissioning and parameterisation of Beckhoff modules and Bus Terminals e USB cable for KS2000 The KS2000 cable connects the modules with the PC. The USB cable features electrical isolation. Status LEDs indicate whether data are sent or received. On the connected PC the USB cable behaves like a COM port and can therefore be used for all Beckhoff tools using serial communication. Pict. KS2000-Z3-USB connection cable for KS2000 or TwinCAT for serial conversion from USB for, length 3 m f 761 e ADS (over fieldbus) f KS2000- Z2-USB

7 FM33xx-B110 Housing type A Housing type B FM33xx-B110 Thermocouple with EtherCAT interface 762 The FM33xx-B110 fieldbus modules allow 12 or 32 thermocouples to be connected to a module. The connecting circuitry for these multiple thermocouples is housed in a compact, splash-proof housing and has an EtherCAT IN and an EtherCAT OUT interface. The modules are supplied with power via separate M8 connections and are daisychain -capable on both the power supply and EtherCAT sides, i.e. several modules can be wired in series in a line topology. The module s circuit can operate thermocouple sensors using a 2-wire connection. Linearisation over the full temperature range is realised with the aid of a micro processor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The Fieldbus Modules have back-voltage protection circuitry to protect against external voltages applied to the thermocouple inputs. Voltages of up to 230 V AC are withstood without damage to the module. Those thermocouple inputs that are not affected remain functionally operative or are only affected for a short time. The extended parameterisation is carried out via EtherCAT. The parameters are stored in the module. The status of the Fieldbus Module is indicated via LEDs. The different versions of the FM33xx Fieldbus Module differ in terms of the number of available thermocouple input channels (12 or 32 channels) and the housing type (clip-on housing A or add-on housing B). The addon housing (type B) features two locking latches and a continuous rubber seal to provide an IP 65 connection to the socket element. In addition, housing type B features two cast brackets with holes for attaching the FM module to mounting plates (throughhole mounting). FM3312-B FM3312-B FM3332-B FM3332-B FM33xx-B110 Fieldbus Module, thermocouple, 12-channel, type J, EtherCAT IN/OUT interface, housing type A Fieldbus Module, thermocouple, 12-channel, type J, EtherCAT IN/OUT interface, housing type B Fieldbus Module, thermocouple, 32-channel, type J, EtherCAT IN/OUT interface, housing type A Fieldbus Module, thermocouple, 32-channel, type J, EtherCAT IN/OUT interface, housing type B

8 FM33xx-B110 Technical data FM3312-B110 FM3332-B110 Fieldbus EtherCAT Data transfer rates 100 Mbaud Configuration possibility via the controller Fieldbus connection method 2 x M12 socket, 4-pin (d-coded) Thermocouple channels Thermocouple connections industrial plug-in connection (Han24E, Han64D), 2-wire connection Cable length max. 100 m Sensor types type J, mv measurement (other types on request) Measuring range type J: C Resolution 0.1 C per digit Conversion time approx. 250 ms Measuring accuracy < ±0.5 % (of the full scale value) Input filter 5 variations, configurable Power supply 24 V DC (-15 %/+20 %), feed: 1 x M8 plug, 4-pin; downstream connection: 1 x M8 socket, 4-pin Current consumption typ. 120 ma/max. 150 ma typ. 150 ma/max. 180 ma Bit width in the process image input: 1 x 16 bit data, 2 x 8 bit status (per channel), 1 bit WcState, 10 bytes InfoData Electrical isolation channels/control voltage: 500 V, between the channels: no, control voltage/fieldbus: 500 V (EtherCAT) Housing type A industrial plug-in connector, Han24B Housing type B add-on housing AGG + locking bracket Housing pin insert Han24E Han64D Contacts hard gold plated Dimensions (L x W x H) type A: 120 mm x 52 mm x 129 mm, type B: 150 mm x 52 mm x 129 mm Weight type A: 950 g, type B: 1,030 g Operating/storage temperature C/ C Vibration/shock resistance conforms to EN /EN EMC immunity/emission conforms to EN /EN Protect. class/installation pos. housing to IP 65 (EtherCAT connector: IP 67)/variable Further information ZK1090-6xxx-xxxx ZK2020-3xxx-xxxx accessories EtherCAT/Ethernet M12 power cables

9 FM33xx-B310 Housing type A Housing type B FM33xx-B310 Thermocouple with PROFIBUS interface 764 The FM33xx-B310 Fieldbus Modules allow 12 or 32 thermocouples to be connected to a module. The connecting circuitry for these multiple thermocouples is housed in a compact, splash-proof housing and has a PROFIBUS DP interface with a transmission rate of 12 Mbaud. Data are mainly exchanged cyclically, although acyclic services ( DP-V1 ) are also available for parameterisation and diagnosis. The module s circuit can operate thermocouple sensors using a 2-wire connection. Linearisation over the full temperature range is realised with the aid of a microprocessor. The temperature range can be selected freely. The error LEDs indicate a broken wire. Compensation for the cold junction is made through a temperature measurement in the connecting plugs. This means that standard extension leads can be connected. The have backvoltage protection circuitry to protect against external voltages applied to the thermocouple inputs. Voltages of up to 230 V AC are withstood without damage to the module. Those thermocouple inputs that are not affected remain functionally operative or are only affected for a short time. The extended parameterisation may be carried out either via the fieldbus or, using the KS2000 software tool, through the configuration interface. The parameters are stored in the module. The status of the Fieldbus Module is indicated via LEDs. The different versions of the FM33xx-B310 Fieldbus Module differ in terms of the number of available thermocouple input channels (12 or 32 channels), the type of thermocouple that is implemented (type J or K), and the housing type (clip-on housing A or add-on housing B). The add-on housing (type B) features two locking latches and a continuous rubber seal to provide an IP 65 connection to the socket element. In addition, housing type B features two cast brackets with holes for attaching the FM module to mounting plates (throughhole mounting). FM33xx-B310 FM3312-B Fieldbus Module, thermocouple, 12-channel, type K, PROFIBUS interface, housing type A A FM3312-B Fieldbus Module, thermocouple, 12-channel, type J, PROFIBUS interface, housing type A A FM3312-B Fieldbus Module, thermocouple, 12-channel, type K, PROFIBUS interface, housing type B B FM3312-B Fieldbus Module, thermocouple, 12-channel, type J, PROFIBUS interface, housing type B B FM3332-B Fieldbus Module, thermocouple, 32-channel, type K, PROFIBUS interface, housing type A A FM3332-B Fieldbus Module, thermocouple, 32-channel, type J, PROFIBUS interface, housing type A A FM3332-B Fieldbus Module, thermocouple, 32-channel, type K, PROFIBUS interface, housing type B B FM3332-B Fieldbus Module, thermocouple, 32-channel, type J, PROFIBUS interface, housing type B B

10 FM33xx-B310 Technical data FM3312-B310 FM3332-B310 Fieldbus PROFIBUS DP Data transfer rates max. 12 Mbaud Configuration possibility via KS2000 or the controller Fieldbus connection method DIN 45322, 6-pin, screwed Thermocouple channels Thermocouple connections industrial plug-in connection (Han24E, Han64D), 2-wire connection Cable length max. 10 m Sensor types type J, K, mv measurement Temperature range type J: C; type K: ,370 C Resolution 0.1 C per digit Conversion time approx. 250 ms Measuring error < ±0.5 % (of the full scale value) Input filter 5 variations, configurable Power supply 24 V DC (-15 %/+20 %) Current consumption typ. 90 ma/max. 120 ma typ. 100 ma/max. 130 ma Bit width in the process image input: 4 x 16 bit data, optional: 4 x 8 bit control/status Electrical isolation channels/control voltage: 500 Vrms, between the channels: no, control voltage/fieldbus: 100 Vrms (PROFIBUS) Housing type A industrial plug-in connector, Han24B Housing type B add-on housing AGG + locking bracket Housing pin insert Han24E Han64D Contacts hard gold plated Dimensions (L x W x H) type A: 120 mm x 52 mm x 129 mm, type B: 150 mm x 52 mm x 129 mm Weight type A: 950 g, type B: 1030 g Operating/storage temperature C/ C Vibration/shock resistance conforms to EN /EN EMC immunity/emission conforms to EN /EN Protect. class/installation pos. housing to IP 65 (PROFIBUS connector: IP 67)/variable Further information ZS angled PROFIBUS plug, DIN 45322, 6-pin ZS angled PROFIBUS socket, DIN 45322, 6-pin ZS straight PROFIBUS plug terminating resistor, 6-pin ZB3300 PROFIBUS cable 12 Mbaud 1 x 2 x 0.64 mm², 5-wires, drag-chain suitable KS2000 configuration software for extended parameterisation 761