Motorized switch-disconnectors OTM_F_. Installation instruction 34OTM_F_ / 1SCC303010M0202
|
|
|
- Austen Allison
- 5 years ago
- Views:
Transcription
1 Motorized switch-disconnectors _F_ Installation instruction 4_F_ / SCC000M00
2
3 Contents Installation instruction, _F_ Contents Mounting and dimensional drawings... 4 Mounting positions... 5 Control circuit... 5 Manual operation: Local... 6 Electrical operation: Remote... 6 Automatic operation... 7 Impulse control... 7 Continuous control... 7 Locking... 8 Locking state information... 8 Technical data... 9 Terminal clamp sets: OZX_... 0 Terminal shrouds: OTS_... 0 Auxiliary contact blocks: OA_... Handle storage: OTVS0... Fourth pole: OTP_... O OFF I O I O A06644 O OFF SCC000M00, rev. B
4 4 PE L C I Installation instruction, _F_ Mounting and dimensional drawings: 0-5F_C_ M4 m 6.6 lb.in. ø 4,5 DIA ,5...5 mm / x,5-6 mm AWG / x 4-6 AWG 4-5 mm in mm 8.../0 AWG ote: Use protection against direct contact. For example: 90 4 mm 0.6 in 6 m 55 lb.-in. Remove 5.8 A06 E F_M 40 5 Ø4,5, E M005/0-5F_M B ,5 6, , ( -pole ) 86,5 ( 4-pole ) 6 4 SCC000M00, rev. B
5 4 PE L C I C L + - Mounting positions, Control circuit Installation instruction, _F_ Mounting positions 4 A06 PE I 0 Control Circuit Only an authorised electrician may perform the electrical installation and maintenance of motorized switch. Do not attempt any installation or maintenance actions when a motorized switch is connected to the electrical mains. Before starting work, make sure that the switch is de-energised. A C B 4 PE L F C I 0 4 Vdc A06. Terminal for motor operator voltage supply. Control terminal for push buttons. Terminal for state information of locking Do not couple power for the control terminal. See the correct terminal for the power supply. 5 SCC000M00, rev. B
6 Installation instruction, _F_ Manual operation: Local, Electrical operation: Remote Manual operation: Local A064 CLICK! Electrical operation is prevented when the handle is attached to the switch panel. Electrical operation: Remote ever open any covers on the product. There may be dangerous external control voltages inside the motorized switch even if the voltage is turned off. ever handle control cables when the voltage of the motorized switch or external control circuits are connected. 4 A065 I 6 SCC000M00, rev. B
7 Electrical operation: Resetting Fuse. Impulse control, Continuous control Installation instruction, _F_ Resetting Fuse A066 Impulse control I 0 I - position 0 - position Continuous control I - command 0 - command I - position A position If a new command is given before the switch has reached the position of the previous command, the internal protection may operate. 7 SCC000M00, rev. B
8 Installation instruction, _F_ Locking, Locking state information Locking Prevent manual and electrical operation. Locking possible at any position. Check position before locking. I 4 Position 5 I mm A067 0-I State information Fuse Res et SCC000M00, rev. B Fuse Res et 4 8 Fuse Res et A068 I
9 Technical data Installation instruction, _F_ Technical data Motor operator, control circuit Value Cabling/Rating Rated operational voltage U [V] 0-40 Vac/dc 50-60Hz Operating voltage range x U Operating angle 90 0-I, I-0 Operating time See Table Protection degree Rated impulse withstand voltage Uimp IP 0, front panel 4 kv Voltage supply PE L, + -,5 -,5mm F Max. MCB 6A Control terminal for the push-buttons C I 0,5 -,5mm Maximum cable length Terminal for state information Also used with the automatic control unit Common, voltage supply Handle attached or motor operator locked 4 SCPD 00 m 4 Max. MCB CA Operating temperature C Transportation and storage temperature C,5mm A AC-/50V Altitude Max. 000m Table General technical data of motor operators Type Voltage U e ominal current a) I n Current Inrush a) Operating time a) I-0, 0-I [V] [A] [A] [s] _ 0-40 Vac/dc 0, - 0,5,5 -,0 0,5 -,0 a) Under nominal conditions Table Specified technical data of motor operators 9 SCC000M00, rev. B
10 Installation instruction, _F_ Terminal clamp sets OZX_, Terminal shrouds OTS_ OZX_ mm 8.../0 AWG OZXL OZXT OZXT4 OZXL 6-5F_C OZXT OZXT4 6 m 55 lb.in 4 mm 0.6 in OZXT6 OZXT OZXT OZXT6 A069 OTS_ OTS5T OTS5T A SCC000M00, rev. B
11 Auxiliary contact blocks OA_, Handle storage OTVS0 Installation instruction, _F_ OA_ x0,75...,5 mm x8...4 AWG 0,8 m 7 lb.-in. POZIDRIVE M,5 Form 4 OAG max O C OAG0 OA8G0 I 0 8,75 max OAG0 OA8G0 OAG OAG For -pole only A064 OTVS0 0 6 A B A064 SCC000M00, rev. B
12 Installation instruction, _F_ Fourth pole OTP_ OTP_ C OTP_ OTPD60FP OTPD5FP A O I B 40 OTPS60FP OTPL60FP OTP60FP OTPE60FP 6-5 OTPS5FP OTPL5FP OTP5FP OTPE5FP ()7 L4 PE ()8 T4 PE 4-5 mm in mm 8.../0 AWG 40,5...5 mm AWG x,5-6 mm x AWG A064 6 m 55 lb.-in. 4 mm 0.6 in SCC000M00, rev. B
13 otes Installation instruction, _F_ SCC000M00, rev. B
14 Installation instruction, _F_ otes 4 SCC000M00, rev. B
15
16 Printed by: Waasa Graphics Oy, Vaasa Finland Producted by: GRAFIMER, Vaasa, Finland ABB Oy Breakers and Switches P.O Box 6 FI-650 VAASA, Finland Telephone Telefax The technical data and dimensions are valid at the time of printing. We reserve the right to subsequent alterations.
34OTM_F_C rev. F / 1SCC303009M0206. Motorized change-over switches OTM_F_C Installation and operating instructions
4_F_C rev. F / SCC0009M006 Motorized change-over switches _F_C nstallation and operating instructions Contents Contents Mounting and dimensional drawings... 4 Mounting positions... 5 Control circuit...
By-pass and transfer switches OT_Y. Installation instruction 34OT_Y_ / 1SCC301080M001
By-pass and transfer switches OT_Y Installation instruction 34OT_Y_ / 1SCC301080M001 Installation instruction, OT_Y Contents Operation...3 Mounting and dimensional drawings... 4-12 OT160-250_Y_... 4-5
Automatic Transfer Switch OTM_C_20D. Installation and Operation Instructions
Automatic Transfer Switch OTM_C_20D Installation and Operation Instructions Contents 1 SYMBOLS & TERMS... 1 1.1 USE OF SYMBOLS... 1 1.2 EXPLANATIONS OF ABBREVIATIONS AND TERMS... 1 2 PRODUCT OVERVIEW...
Automatic Transfer Switch OTM_C20D
v Read through this instruction carefully before working on the switch, and keep this instruction for later reference v The images provided in this instruction book are for illustration purposes only and
115/230 VAC Digital Input Module OHDI-01
Drive IT Low Voltage AC Drives User s Manual 115/230 VAC Digital Input Module OHDI-01 OHD4 2 115/230 VAC Digital Input Module OHDI-01 Safety WARNING! All electrical installation and maintenance work on
Miniature Circuit-Breaker IEC Series 8562
> 1 to 3 pole versions > Rated current from 0.5... 40 A > 6 or 10 ka breaking capacity to DI VDE 0641, respectively E 60898 > Isolating Function to E 60947-2 > Permanently set thermal and magnetic trips
ABB Drives. User s Manual. Digital I/O Extension Module RDIO-01
ABB Drives User s Manual Digital I/O Extension Module RDIO-01 Digital I/O Extension Module RDIO-01 User s Manual 3AFE 64485733 REV B EN EFFECTIVE: 10.2.2003 2003 ABB Oy. All Rights Reserved. Safety Instructions
Dimensional drawings. Dimensional drawings
119 120 Frame size R7 without pedestal (mm) Center of gravity 64796003_3/7 E 121 Frame size R7 with bottom exit (mm) 64796003_6/7 G 122 Frame size R7 with bottom exit and top entry and bottom exit shrouds
K1C024B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Sub-assembly
NF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC1010D0201 28/03/11 NFE-.. / NFZE-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
ST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077
MINIATURE CIRCUIT BREAKERS ST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077 The ST 200 M miniature circuit breaker provides supplementary
High Impedance Protection Relay SPAE010, SPAE011. Product Guide
SPAE010, SPAE011 SPAE010, SPAE011 1MRS750383-MBG Issued: April 1999 Status: Updated Version: D/21.03.2006 Data subject to change without notice Features High impedance type differential current earth-fault
Safe monitoring relays
monitor for safe standstill monitoring Approvals Block diagram Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous LED indicator
TeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
K1D004ACH cam switch - 4-pole A - for Ø 22 mm
Characteristics cam switch - 4-pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing mode Cam
User s Manual Pulse Encoder Interface Module OTAC-01
Drive IT Low Voltage AC Drives User s Manual Pulse Encoder Interface Module OTAC-01 2 Safety WARNING! All electrical installation and maintenance work on the drive should be carried out by qualified electricians
Feeder protection relay SPAA 121 C. Product Guide
Issued: April 1999 Status: Updated Version: C/06.03.2006 Data subject to change without notice Features Two-phase low-set phase overcurrent unit with definite time or inverse time characteristic Two-phase
MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
K1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm
Characteristics cam voltmeter switch - 3L and 3L-N - 60-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
MNS ACS880 Switchgear mounted industrial drives
MNS ACS880 Switchgear mounted industrial drives Switchgear mounted industrial drives AC Drives are designed for installation in a normal industrial environment. However, various auxiliary equipment for
Ordering Key. Type Rated Operational Rated operational Control Voltage Uc Options
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
K1K015NZ4 cam stepping switch - 2-pole A - screw mounting
Characteristics cam stepping switch - 2-pole - 60-12 A - screw mounting Complementary Number of steps 5 Main Range of product Product or component type Component name [Ith] conventional free air thermal
Residual overvoltage relay
Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Definite-time residual overvoltage earthfault protection and supervision Two independent operation stages, e.g. one
VLT Line Filter MCC 107 EMC Filter Series VLT Midi Drive FC 280 (K1 K3)
These instructions provide technical and installation information for the MCC 107 EMC filter series. Only Danfoss qualified personnel is allowed to install this equipment. The personnel must be familiar
High impedance protection relay
High impedance protection relay Page 1 Issued: April 1999 Status: New Data subject to change without notice Features High impedance type differential current earth-fault protection, so called restricted
DC-Switch With G20S/G20. next
DC-Switch With knife contacts G2S/G2 www.krausnaimer.com next Content The most important technical data: G2S / G2... 3 Electrical data of ON/OFF-Swichtes: G2S / G2... 4 Electrical data of Change Over Switches:
Rated operational Control Voltage Uc Supply Voltage Connection Rated operational current 40 C voltage Ue Us 25A AC-53a 32A AC-53a
otor Controllers AC Semiconductor otor Controller Type RSHR 3-Phase Soft starting and stopping of 3-phase squirrel cage motors Control of all 3 phases In Line or In Delta motor connection Low inrush and
Earth-fault Relay SPAJ 110 C. Product Guide
Issued: April 1999 Status: Updated Version: C/12.04.2006 Data subject to change without notice Features Low-set neutral overcurrent stage with definite time or inverse time characteristic High-set neutral
K1D011B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 30-12 A - for Ø 22 mm Complementary Main Number of decimal 11 Switching angle 30 Range of product Product or component type Component name
ABB Drives. User s Manual. Analogue I/O Extension Module RAIO-01
ABB Drives User s Manual Analogue I/O Extension Module RAIO-01 Analogue I/O Extension Module RAIO-01 User s Manual 3AFE 64484567 REV A EN EFFECTIVE: 1.2.2002 2002 ABB Oy. All Rights Reserved. Safety
SR2B201FU compact smart relay Zelio Logic - 20 I O V AC - clock - display
Characteristics compact smart relay Zelio Logic - 20 I O - 100..240 V AC - clock - display Main Range of product Product or component type Complementary Local display Number or control scheme lines Cycle
K1B004TLH cam switch - 1 pole A - screw mounting
Characteristics cam switch - 1 pole - 30-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing mode Cam
K1D012ULH cam changeover switch - 2-pole A - screw mounting
Characteristics cam changeover switch - 2-pole - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing
60103 Circuit Breaker
6003 Circuit Breaker United States MINIATURE CIRCUIT BREAKER, 20/240VAC, 2A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Circuit Breaker Type: Standard
ABB Drives. User s Manual Pulse Encoder Interface Module MTAC-01
ABB Drives User s Manual Pulse Encoder Interface Module MTAC-01 Pulse Encoder Interface Module MTAC-01 User s Manual 3AFE68591091 REV B EN EFFECTIVE: 04.04.2006 2006 ABB Oy. All Rights Reserved. 5 Safety
Allen-Bradley 1492-RCDA4A40
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Suitable for DIN Rail mounting Approval marks are easily visible on dome Terminal design helps
Supplementary Circuit Protectors Type GSB63
Supplementary Circuit Protectors Type GSB63 l Protection of circuits against short circuit and overload currents l UL1077 supplementary protection l 1,, 3 and 4 pole arrangements l 13 amperage sizes up
E-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection
3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
Nokeval. FD100 series. User Manual
Nokeval FD100 series User Manual Contents Document information... 2 FD100A4 and FD100A6 field displays... 3 Power supply connection... 4 Configuring... 5 Specifications... 7 Document information Device
SR3B261FU modular smart relay Zelio Logic - 26 I O V AC - clock - display
Characteristics modular smart relay Zelio Logic - 26 I O - 100..240 V AC - clock - display Main Range of product Product or component type Zelio Logic Modular smart relay Complementary Local display Number
SR3B261FU modular smart relay Zelio Logic - 26 I O V AC - clock - display
Characteristics modular smart relay Zelio Logic - 26 I O - 100..240 V AC - clock - display Main Range of product Product or component type Zelio Logic Modular smart relay Complementary Local display Number
Sensitive Earth-fault Relay SPAJ 111 C. Product Guide
Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent
SR2B121B compact smart relay Zelio Logic - 12 I O - 24 V AC - clock - display
Characteristics compact smart relay Zelio Logic - 12 I O - 24 V AC - clock - display Main Commercial Status Range of product Product or component type Commercialised Zelio Logic Compact smart relay Complementary
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
Combined Overcurrent and Earth-fault Relay SPAJ 141 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/19.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
SR2A201BD compact smart relay Zelio Logic - 20 I O - 24 V DC - no clock - display
Characteristics compact smart relay Zelio Logic - 20 I O - 24 V DC - no clock - display Main Range of product Product or component type Complementary Local display Number or control scheme lines Cycle
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm
Product data sheet Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Two-hand control unit for press controllers and safety circuits Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous 1
Non-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
Motor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
MULTI-POLE PHOTOVOLTAIC SYSTEMS. COMPACT and MODULAR Housing
MULTI-POLE Lightning Current and Surge Arresters for PHOTOVOLTAIC SYSTEMS Class I / (B+C) and Class II / (C) COMPACT and MODULAR Housing 44 PV ISPRO BS(R) 12,5 The PV ISPRO BS(R) 12,5 series of over voltage
XCKS141H29 limit switch XCKS - th.plastic roller lever var. length - 1NC+1NO - snap - M20
Characteristics limit switch XCKS - th.plastic roller lever var. length - 1NC+1NO - snap - M20 Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device
Technical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
K1F006ALH cam switch - 6-pole A - screw mounting
Characteristics cam switch - 6-pole - 45-12 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting
Single contact blocks
Single contact blocks Selection diagram CONTACT BLOCKS 10G 01G 10L 01K 1NO leading slow slow 1NO slow lagging slow CONNECTIONS silver contacts (standard) G silver contacts gold plated FIXING V clamping
Non-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
ic60n RCBO 30 ma IEC , IEC , AS/NZS
ic60n RCBO 30 ma DB405571 Country approval pictograms IEC 61009-1, IEC 61009-2-2, AS/NZS 61009.1 PB110075-70 b The single-phase ic60n RCBO s self-contained residual current device provides protection of
Autoprotected Surge Arresters New OVR Plus range
Autoprotected Surge Arresters New OVR Plus range A complete solution with the OVR PLUS range Thanks to its continuous innovation on surge protection, ABB improves constantly its offer by launching on the
FUSERBLOC LMDC Fuse combination switches FUSERBLOC Live Maintenance DC
Fuse protection The solution for > Live maintenance of speed drives supplied by a common DC bus > Live maintenance of PV inverters connected in parallel on a same circuit fuser-lm_2_a Strong points > Compact
Redline. Extensions. Display contacts. Function S. Display contact CA. Function. Add-on Devices T3.2
Redline Extensions All MCB s (except G20), RCCB s (except Delta B) & RCBO s are designed to accept the same family of extensions. Main device ON Normal working status Addon Devices The extensions intended
Sensitive definite time or inverse time earth-fault stage for back-up residual earthfault
Issued: April 1999 Status: Updated Version: B/09.11.2001 Data subject to change without notice Features Sensitive restricted earth-fault protection stage for fast, selective earth-fault protection Sensitive
Datasheet - CSS 11-30S-D-M-ST
12.02.2013-18:42:30h Datasheet - CSS 11-30S-D-M-ST Safety sensors / CSS 30S Preferred typ Stainless steel enclosure Max. 31 sensors can be wired in series. Connector M12, 8-pole Ø M30 High repeat accuracy
Combined Overcurrent and Earth-fault Relay SPAJ 140 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/18.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
WEG Contactors - CWM and CWME Series
Inside (877) 789 Fax () 87 WEG Contactors CWM and CWME Series International () 07 The CWM generalpurpose contactor line has been designed taking into consideration industrial duty and reliability in mind.
SR2B121BD compact smart relay Zelio Logic - 12 I O - 24 V DC - clock - display
Characteristics compact smart relay Zelio Logic - 12 I O - 24 V DC - clock - display Main Range of product Product or component type Zelio Logic Compact smart relay Complementary Local display Number or
Arc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Page 1 Issued: May 1999 Status: New Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for arc detection Two high-speed
MSR 2400W. Multi purpose Power System for Telecom and Industrial Applications. Nominal Output Voltage. Voltage Setting Range
MSR 2400W Multi purpose Power System for Telecom and Industrial Applications 2400 W modular system All voltages available 0 144VDC per module U and I adjustable from 0 to max value Hot-swap plug-in modules
Safe monitoring relays
Unit features Unit description Gertebild ][Bildunterschrift_Stillstandswchter Standstill monitor for safe standstill monitoring Approvals Zulassungen Gertemerkmale Positive-guided relay outputs: 2 safety
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
Surge Protection Devices Ex9UE2
Surge Protection Devices Ex9UE2 Surge Protection Devices Type 2 (Class II, T2, C) Tested according to EN 61643-11 Maximum continuous operational voltage U c from 275 V up to 440 V AC Versions with 1+0,
Mini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
SERIES 230 A2ADTL Transfer Switch User Manual
SERIES 230 A2ADTL Transfer Switch User Manual Version V1.1 Revision Date Jan 12 th, 2018 BOM Code 31013293 ASCO Power Technologies provides customers with technical support. Users may contact the nearest
Close Protection from Moeller. miniature branch circuit breakers miniature supplementary protectors
Close Protection from Moeller miniature branch circuit breakers miniature supplementary protectors FAZ branch circuit breakers General Information... Selection Tables Trip Characteristic C - Box terminals...
Safe timer relay/contact expansion modules
Contact expander module for increasing the number of available contacts, Pulse-on timer relay for step-by-step control of movement sequences, Delay-on energisation timer for unlocking an interlock with
Features. LED Driver. RCOB Constant Current Active PFC Single Output. AC/DC Converter
Features LED Driver Low Cost 230VAC LED Supply 350mA to 1050mA Output, 25-44VDC Active Factor Correction >0.95 Designed to drive 15W-46W COB LEDs Terminal Block Input/Output with Cable Clamps Fully Protected
Electronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers
Synchro-check relay. Application
Issued: April 1999 Status: Updated Version: B/08.11.2001 Data subject to change without notice Features Two identical operation stages allowing the closing conditions of two separate circuit breakers to
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous
ohne Abbildung Contact expansion module for increasing the number of available contacts Approvals PZE X4.1P with universal power supply Unit features Positive-guided relay outputs: 4 safety contacts (N/O),
Max. Back-up fuse [A] 50 ka, 690V AC 5 ka, 600V AC IEC/EN Coordination Type 1 Type 2
![Max. Back-up fuse [A] 50 ka, 690V AC 5 ka, 600V AC IEC/EN Coordination Type 1 Type 2](/thumbs/89/100527568.jpg "Max. Back-up fuse [A] 50 ka, 690V AC 5 ka, 600V AC IEC/EN Coordination Type 1 Type 2")
Bulletin T Product Selection Thermal Overload Relays For Use With C C Setting Range [A] gl/gg Max. Backup fuse [A] UL Class K ka, V AC ka, V AC IEC/EN Coordination Type Type UL.. TAA.. TAA.. TAA.. TAA..
Disconnect Switches. Safe Switching and Disconnecting
IB105-UK_U1_U4_Pfade.indd 2-3 14.04.2005, 16:51:30 Disconnect Switches Safe Switching and Disconnecting Disconnect Switches from Salzer are hand-operated switchgear for main circuits and are offered as
SR2B121FU. Price* : USD with ladder programming. 80 maat 100 V (without extension)
Characteristics Product availability : Stock - Normally stocked in distribution facility Price* : 288.00 USD Main Range of product Product or component type Complementary Local display Number or control
XCKP2110N12 limit switch XCKP - metal end plunger - 1NC +1NO - snap - 1/2NPT
Characteristics limit switch XCKP - metal end plunger - 1NC +1NO - snap - 1/2NPT Complementary Switch actuation Electrical connection Cable entry Contacts insulation form Positive opening Positive opening
SR3B261FU modular smart relay Zelio Logic - 26 I O V AC - clock - display
Characteristics modular smart relay Zelio Logic - 26 I O - 100..240 V AC - clock - display Product availability : Stock - Normally stocked in distribution facility Price* : 486.00 USD Main Range of product
Catalog Number Identification with Elements Explained V V V V X 347 V Hz
Owner s Manual 917 & 918 Remote Control Switches TABLE OF CONTENTS page Ratings & Installation... 1 2 Optional Accessories... 3 4 Troubleshooting & Parts Kits... 5 Wiring & Outline Diagrams... back of
SRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
Datasheet - SLB 200-C04-1R
14.02.2013-17:06:30h Datasheet - SLB 200-C04-1R Safety light barriers / Safety monitoring modules to monitor safety light barriers / SLB 200-C Up to 2 light barrier pairs SLB 200 can be connected 1 safety
ZB5FG09 flush mounted selector switch head key pos stay put
Characteristics flush mounted selector switch head key 455 3 pos stay put Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device short name XCKJ Sensor
1492-SP Supplementary Protectors
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-
RER 123 Bus Connection Module. Technical Description
Bus Connection 1MRS751143-MUM Issued: 06.11.1998 Version: E/08.07.2005 Bus Connection 1. About this manual...4 1.1. Copyrights...4 1.2. Trademarks...4 1.3. Guarantee...4 2. Safety information...5 3. General...6
ABB Drives. User s Manual. Modbus Adapter Module RMBA-01
ABB Drives User s Manual Modbus Adapter Module RMBA-01 Modbus Adapter Module RMBA-01 User s Manual 3AFE 64498851 REV A EN EFFECTIVE: 1.3.2002 2002 ABB Oy. All Rights Reserved. Safety instructions Overview
XCKS131 limit switch XCKS - thermoplastic roller lever - 1NC+1NO - snap action - Pg13
Characteristics limit switch XCKS - thermoplastic roller lever - 1NC+1NO - snap action - Pg13 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 80.00 USD Main Range
Technical data. Safety parameters: see page 333. DC maximum residual ripple: 10% Supply voltage tolerance: DC consumption: Control circuit
Safety module CS DM-01 Technical data Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94 Protection degree IP40 (housing), IP20 (terminal strip) Dimensions see page 283, design A Two-hand
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
SR3B261BD modular smart relay Zelio Logic - 26 I O - 24 V DC - clock - display
Product datasheet Characteristics SR3B261BD modular smart relay Zelio Logic - 26 I O - 24 V DC - clock - display Main Range of product Product or component type Zelio Logic Modular smart relay Complementary
24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD
United States 24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Approvals: IEC 60947-2 Rated