Teradata Data Warehouse Appliance Platform Product and Site Preparation Quick Reference B K May 2011

Transcription

1 Teradata Data Warehouse Appliance 2650 Platform Product and Site Preparation B K May 2011

2 The product or products described in this book are licensed products of Teradata Corporation or its affiliates. Teradata, BYNET, DBC/1012, DecisionCast, DecisionFlow, DecisionPoint, Eye logo design, InfoWise, Meta Warehouse, MyCommerce, SeeChain, SeeCommerce, SeeRisk, Teradata Decision Experts, Teradata Source Experts, WebAnalyst, and You ve Never Seen Your Business Like This Before are trademarks or registered trademarks of Teradata Corporation or its affiliates. Adaptec and SCSISelect are trademarks or registered trademarks of Adaptec, Inc. AMD Opteron and Opteron are trademarks of Advanced Micro Devices, Inc. BakBone and NetVault are trademarks or registered trademarks of BakBone Software, Inc. EMC, PowerPath, SRDF, and Symmetrix are registered trademarks of EMC Corporation. GoldenGate is a trademark of GoldenGate Software, Inc. Hewlett-Packard and HP are registered trademarks of Hewlett-Packard Company. Intel, Pentium, and XEON are registered trademarks of Intel Corporation. IBM, CICS, RACF, Tivoli, z/os, and z/vm are registered trademarks of International Business Machines Corporation. Linux is a registered trademark of Linus Torvalds. LSI and Engenio are registered trademarks of LSI Corporation. Microsoft, Active Directory, Windows, Windows NT, and Windows Server are registered trademarks of Microsoft Corporation in the United States and other countries. Novell and SUSE are registered trademarks of Novell, Inc., in the United States and other countries. QLogic and SANbox are trademarks or registered trademarks of QLogic Corporation. SAS and SAS/C are trademarks or registered trademarks of SAS Institute Inc. SPARC is a registered trademark of SPARC International, Inc. Sun Microsystems, Solaris, Sun, and Sun Java are trademarks or registered trademarks of Sun Microsystems, Inc., in the United States and other countries. Symantec, NetBackup, and VERITAS are trademarks or registered trademarks of Symantec Corporation or its affiliates in the United States and other countries. Unicode is a registered trademark of Unicode, Inc. in the United States and other countries. UNIX is a registered trademark of The Open Group in the United States and other countries. Other product and company names mentioned herein may be the trademarks of their respective owners. The information contained in this document is provided on an as-is basis, without warranty of any kind, either express or implied, including the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. In no event will Teradata Corporation be liable for any indirect, direct, special, incidental, or consequential damages, including lost profits or lost savings, even if expressly advised of the possibility of such damages. The information contained in this document may contain references or cross-references to features, functions, products, or services that are not announced or available in your country. Such references do not imply that Teradata Corporation intends to announce such features, functions, products, or services in your country. Please consult your local Teradata Corporation representative for those features, functions, products, or services available in your country. Information contained in this document may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. Teradata Corporation may also make improvements or changes in the products or services described in this information at any time without notice. To maintain the quality of our products and services, we would like your comments on the accuracy, clarity, organization, and value of this document. Please teradata-books@lists.teradata.com Any comments or materials (collectively referred to as Feedback ) sent to Teradata Corporation will be deemed non-confidential. Teradata Corporation will have no obligation of any kind with respect to Feedback and will be free to use, reproduce, disclose, exhibit, display, transform, create derivative works of, and distribute the Feedback and derivative works thereof without limitation on a royalty-free basis. Further, Teradata Corporation will be free to use any ideas, concepts, know-how, or techniques contained in such Feedback for any purpose whatsoever, including developing, manufacturing, or marketing products or services incorporating Feedback. Copyright 2011 by Teradata Corporation. All Rights Reserved.

3 NOTICE This is a contractual document. It contains important warnings and confers important legal rights and obligations. You are advised to read it carefully. It is the responsibility of the customer to assure that all installation preparations are complete and in compliance with Teradata Corporation specifications and requirements and all applicable national, state, or local codes, regulations, and laws. SITE PREPARATION This document contains the information necessary for the preparation of a site conforming to Teradata Corporation specifications. It is very important that the site complies with the requirements specified in this document because, once the equipment has been installed, deficiencies in site preparation or the problems caused by these deficiencies are much more difficult to detect and correct. Failure to comply with these requirements or take proper steps to protect equipment against risks identified in this document may cause serious damage to the equipment and to the customer's business. In addition to the need to comply with the requirements specified, electrical wiring and mechanical systems must also comply with all relevant codes, laws, and regulations. It is important that the site be prepared by a customer or his agent who is fully conversant with the special requirements of electronic equipment. The responsibility for ensuring that the site is prepared in compliance with this document remains with the customer. For information and guidance purposes only, a list is provided, in general terms, of these matters for which the customer is responsible. This list is not intended to be comprehensive, and in no way modifies, alters, or limits the responsibility of the customer for all aspects of adequate site preparation. Teradata staff will be available to answer questions relating to the contents of this document, except where: The customer has been notified that a full or partial consultant service is available and/or that Teradata will be willing to undertake a preliminary or final site survey, and The customer shall have entered into a formal contract with Teradata for provision of the same. No comment, suggestion, or advice offered or not offered about preparation of the site, nor any inspection of the site whether before or after preparation, is to be taken as approval of the location of the site and equipment, or of its preparation, and Teradata will not be liable in respect of any comment, suggestion, or advice given by its staff, or in respect of any failure to give advice. Problems caused by a customer s failure to meet any of the site prep requirements may result in Teradata: Charging the customer for additional services, Reclassifying a reported problem priority, and/or Being relieved of the obligation to perform services. Finally, only the customer can know the full extent of damage which may be caused to his business by reason of failure of equipment which is to be installed. For this reason it is the customer's responsibility to ascertain the extent of any such possible damage to his existing or planned business, and to effect full insurance in respect of it. CUSTOMER RESPONSIBILITIES The customer must do or provide the following: When required by Teradata, provide the Teradata customer service representative with appropriate drawings that indicate: Location of the equipment Site wiring (power and signal, paths and lengths) Location of other equipment capable of generating electrical noise, electromagnetic interference, heat, etc. Make building alterations necessary to meet wiring and other site requirements. Provide and install all communications cables, wall jacks, special connectors, and associated hardware. Make sure all applicable codes, regulations, and laws (including, but not limited to, electrical, building, safety, and health) are met. Provide and install auxiliary power or other equipment as required. Make sure the environmental requirements of the system/unit are met. Provide floor coverings and environmental systems that limit or control static electricity build-up and discharge.

4 AC POWER LINE TRANSIENT PROTECTION In the process of power distribution, transient electrical energy (including, but not limited to, lightning strikes, intermittent short circuits, and switching transients) can be introduced on to power lines. Such transient energy can be very damaging to electronic hardware and can also cause data corruption. Under these circumstances, Teradata Corporation recommends the use of AC power transient suppressors and data (communication) line transient suppressors. Such protective devices are intended to guard against power and data line transients that can result in hardware damage and various system or program errors. Improvement of any deficiencies in power quality is a customer responsibility. Malfunction and/or component failure as a result of power quality problems are/is not covered by Teradata Maintenance Agreement. Teradata Corporation accepts no liability for any such occurrence nor for its consequences. DATA LINE TRANSIENT PROTECTION The nature of the transient phenomenon may extend to the data communication lines connected to this equipment. It is the responsibility of the customer to install and connect a data line transient suppression system to correct or prevent any deficiencies. Malfunction and/or component failure as a result of data quality problems are/is not covered by the Teradata Maintenance Agreement. Teradata Corporation accepts no liability for any such occurrence or for its consequences.

5 Purpose and Audience Purpose The purpose of this guide is to provide introductory information about the platform configuration and site preparation requirements. This guide does not provide full product or site preparation information and is intended to be used in conjunction with the Teradata Data Warehouse Appliance 2650 Platform Product and Site Preparation Guide. The full Product and Site Preparation Guide contains the full requirements for preparing a site to receive and install a system, including product statements, cautions and warnings, power measurements, and more. Audience The audience includes, but is not limited to: Customer system administrators and facilities personnel Teradata installation, service, and support personnel Product Description The Teradata Data Warehouse Appliance 2650 platform is an optimized, fully-integrated data warehouse solution designed to meet entry-level data warehousing and analytical decision support requirements, typically requiring fast data scans and heavy analytics. The 2650 model is based on 3-node cliques (3 TPA nodes attached to 3 disk arrays). This creates a CPU-rich environment, designed to support database compression and analytic features. The 2650 can scale up to 45 nodes and is offered with Teradata Database 13.10, 13.0, or Teradata 12.0; Teradata Tools and Utilities 13.10, 13.0, or 12.0; and SUSE Linux Enterprise Server 10 (SLES 10) SP3 or SP Platform Product and Site Preparation 5

6 Cabinet Configurations Cabinet Configurations Figure 1: 2650 First and Second Cabinet Configurations--Maximum Load 2 24-port 1Gb Ethernet switches for server management (chassis #1 and #21) Secondary SM Switch or 48-Port Enet Switch 2 24-port 1Gb Ethernet switches for server management OR 2 48-port 1Gb Ethernet switches for server management and BYNET (chassis #1 and #21) CMIC or VMS per cabinet CMIC / VMS CMIC / VMS 13 TMS / Channel Server TMS / Channel Server / SWS port 1Gb Ethernet switches for BYNET (chassis #10 and #11) KVM BYNET-1 Switch cable manager BYNET-0 Switch TMS / Channel Server 9 8 TMS / Channel Server # managed chassis 1 Primary SM Switch or 48-Port Enet Switch # unmanaged chassis 2 AC boxes per cabinet AC Box AC Box AC Box AC Box components loaded/accessible from rear of cabinet Cabinet_ Platform Product and Site Preparation

7 Dimensions for Cabinet: 24 x 43 Inch Rack Dimensions for Cabinet: 24 x 43 Inch Rack 3.2 cm 1.25 in Feature Height Width Depth Cabinet frame cm (77 in) cm (24 in) cm (43 in) cm 77 in + side stabilizers cm (14 in) each side cm (9 in) + front door cm (5 in) + crown cm (1.25 in) side panels cm (1 in) each side cm 43 in 61 cm 24 in 12.7 cm 5 in Cabinet_0253 Cabinet Footprint/Clearances: 24 x 43 Inch Rack Minimum Front Service Clearance cm 40 in Side Stabilizer 22.9 cm 9 in Caster (fixed) Door Clearance 61 cm 24 in 61 cm 24 in cm 43 in Side Stabilizer cm 7 in Tile Cutout Location cm in Minimum Rear Service Clearance 81.3 cm 32 in Caster (swivel) cm in Door Clearance 61 cm 24 in One Cabinet with Stabilizers Four Ganged Cabinets Cabinet_ Platform Product and Site Preparation 7

8 Weight and Floor Loading Weight and Floor Loading Unit Actual Footprint Area (No Stabilizers) Approx. Installed Weight Distributed Floor Loading Concentrated Floor Loading 2650 cabinet maximum 3-clique configuration Shipping crate 0.68 sq m (7.33 sq ft) 698 kg (1540 lb) based on cabinet footprint: 1025 kg/sq m (210 lb/sq ft) based on footprint plus servicing clearance required to open doors: 492 kg/sq m (100 lb/sq ft) 13.7 kg/sq cm (185 lb/sq in) The shipping crate weighs approximately 136 kg (300 lb). The crate's height x depth x width dimensions are 2.1 m (82 in) x 1.4 m (54 in) x 1 m (39 in). Maximum Cable Lengths Cable Type BYNET Ethernet Server Management Ethernet Maximum Cable Length 30 m (98.5 ft) 30 m (98.5 ft) 1 Gbit Copper 30 m (98.5 ft) Cabinet Heat Dissipation Cabinet Typical Heat Dissipation BTU/Hr a 2650 Max Config b 27, Min Config c 10,600 a 1 watt = BTU/Hr. b 2650 estimated maximum power for following hardware configuration = Nine processing nodes with two CPUs each, nine disk arrays with twenty-four storage drives each, one CMIC node or VMS, two AC boxes, and two 24-port server management switches. c 2650 measured minimum power for following hardware configuration = Three processing nodes with two CPUs each, three disk arrays with twenty-four storage drives each, one CMIC node or VMS, two AC boxes, two 24-port server management switches, and one KVM Platform Product and Site Preparation

9 Input Power Plugs and Receptacles Input Power Plugs and Receptacles Table 1: Power Plugs/Receptacles for Canada, Colombia, El Salvador, Japan, Mexico, Nicaragua, Panama, South Korea, Taiwan, United States, and Venezuela Unit Power Plug Power Receptacle Nameplate Rating a b (Supplied w/ Component) (Provided by Site) 2650 Cabinet NEMA L6-30P NEMA L6-30R 24 Amp 30 Amp NEMA L6-30P 4 cords per cabinet 4 receptacles per cabinet Vac each receptacle on separate power source connection: line to line SWS c (dedicated 5U server) NEMA 5-15P NEMA 5-15R NEMA max 4 cords max 4 receptacles (2 for processor, 1 ea. monitor, modem) a Do not use this table to determine power consumption, to estimate current draw, or to estimate heat generation. For these parameters, see the Product and Site Preparation Guide. Nameplate ratings are a statement of product certification. For North America, code requires the nameplate current rating to be less than the plug rating. b Frequency rating is 50 or 60 Hz for all products. c A system includes a dedicated SWS server or a VMS with an SWS virtual machine (VM). Table 2: Power Plugs/Receptacles for Most Countries Other Than Canada, Colombia, El Salvador, Japan, Mexico, Nicaragua, Panama, South Korea, Taiwan, United States, and Venezuela * Unit Power Plug Power Receptacle Nameplate Rating a b (Supplied w/ Component) (Provided by Site) 2650 Cabinet 32 Amp IEC Single-Phase IEC CEE17, pin and sleeve, 32 Amp, blue, P+N+E, IP44 splash-proof plug, 4 cords per cabinet IEC CEE17, pin and sleeve, 32 Amp, blue, P+N+E 4 receptacles per cabinet each receptacle on separate power source 24 Amp Vac SWS c (dedicated 5U server) country dependent country dependent International max 4 cords max 4 receptacles (2 for processor, 1 ea. monitor, modem) a Do not use this table to determine power consumption, to estimate current draw, or to estimate heat generation. For these parameters, see the Product and Site Preparation Guide. Nameplate ratings are a statement of product certification. b Frequency rating is 50 or 60 Hz for all products. c A system includes a dedicated SWS server or a VMS with an SWS VM. * Bahrain, Brazil, Lebanon, Philippines, and Saudi Arabia require discussions with the site team to determine the appropriate NEMA, Russellstoll, or IEC power plug feature for the specific site Platform Product and Site Preparation 9

10 Communications/Network Requirements Communications/Network Requirements Communications/Network Feature One LAN drop (1Gb Ethernet Copper) Defined IP addresses Purpose Required for each: 2650 processing node Service Workstation * (SWS) (dedicated 2U or 5U server) Teradata Managed Server (TMS) that is used for running applications, loading data, or archive/recovery Note: Additional LAN drops may be required for networkbased archive/recovery. Required for each: 2650 processing node SWS * (dedicated 2U or 5U server) TMS that is used for running applications, data loading, or archive/recovery Customer-provided external internet access (through Axeda or VPN) * A system includes a dedicated SWS server or a VMS with an SWS VM. Required for server management to forward alerts and messages to Teradata, and for Teradata to dial into the system for remote support Platform Product and Site Preparation