The Quality Connection. GigaLine Fiber optic cabling systems for DataCenter Office Industry

Transcription

1 The Quality Connection GigaLine Fiber optic cabling systems for DataCenter Office Industry

2 2 Welcome to the mega store for cable and system solutions Issue: March 2014 LEONI Kerpen GmbH The contents of this catalog are protected by copyright. All rights are reserved. GigaLine Cabling systems Whenever broadband data transmission in combination with large transmission lengths in LAN or MAN is required, fiber optic cable and connection technology is the best choice. With GigaLine fiber optic cables and GigaLine FO connectivity, LEONI offers high-speed data motorways for backbone networks. LEONI products and solutions are used wherever the highest reliability, quality and durability are a must even in harsh and unfavourable conditions. All necessary planning documentation available online: Technical changes, errors and omissions without prior notice. Safety instructions Cables are to be used for the designated applications only.. Waiver The specifications in this document are provided according to our best current knowledge. However, these specifications may not be considered an assurance of specific properties or suitability for specific purposes of the respective products. Such indications may not be interpreted as a misguidance for the violation of property rights or as an assurance of a corresponding license. The suitability of each product for any particular purpose must be checked beforehand with our specialists. Our policy is to continuously improve our materials and products. Therefore, we reserve the right to offer alternatives consistent with our manufacturing programme at the time of enquiry. All information concerning material properties, fire performance, construction, electrical and technical data, prices etc. reflects our current level of knowledge and is provided without obligation. Dimensions and weights are guideline values. All specifications can be changed at any time without prior notification. General conditions of sale and delivery We refer to the currently valid General conditions of sale and delivery which can be obtained from the respective companies.

3 3 page The LEONI Group 4 High-quality industrial cables and conductors 5 Great brands, great service 6 Green Technology 8 Technologies investment in sustainable security 8 GigaLine product range GigaLine FO data cables Introduction GigaLine FO data cables GigaLine fire secured FO data cables GigaLine FO connectivity Introduction GigaLine FO cabling systems GigaLine Trunk and splice boxes GigaLine Compact fiber optic distribution system GigaLine Office and floor distributors GigaLine Fiber-To-The-Desk (FTTD) wall outlets GigaLine FO patch cords / trunk cables GigaLine Patch cord GigaLine Trunk pre-assembled trunk cables GigaLine DataCenter links 86 Acceptance measurement for GigaLine cabling systems 92 Field of applications Office 94 DataCenter 96 Index 102 LEONI news 103

4 4 The LEONI Group Cable expertise for the most varied industrial markets LEONI is a leading supplier of cable systems and related services for the automotive industry and various other industrial sectors. Our group of companies employs more than 61,000 people in 33 countries. Corporate vision, highest quality and innovative power have made us one of the leading cable manufacturers in Europe. LEONI develops and produces technically sophisticated products ranging from wire and optical ibers to cables through to complete cable systems and also ofers the related services. Moreover, the product portfolio comprises strands, standardised cables, hybrid cables, glass iber as well as special cables, cable harnesses, wiring systems components and fully assembled systems for applications in various industrial markets. Your markets our strength. As diverse as our product and service range are the markets and sectors LEONI is supplying. We focus our activities on customers in the ields of Automotive & Commercial Vehicles, Industry & Healthcare, Communication & Infrastructure, Electrical Appliances and Conductors & Copper Solutions. We are among the leading European suppliers in the Communication & Infrastructure market to which at LEONI as a cable manufacturer also belong activities in the ields of Infrastructure & Data Communications, Industrial Plant Projects, Solar & Windpower, Energy & Telecommunications, Irradiation Cross-Linking and Traic Engineering. Our customers beneit worldwide from innovative as well as reliable and long-lasting products of high quality. LEONI we create the best connection for your future. For further information Products and services portfolio at a glance Cable harnesses Service Cable systems / Wiring systems Sensors Relay and safety systems Engineering Copper cables Wires & strands Hybrid cables Optical fibers Optical cables Connectors LEONI's core markets Automotive & Commercial Vehicles Industry & Healthcare Communication & Infrastructure Electrical Appliances Conductors & Copper Solutions

5 5 Future-proof complete solutions For building infrastructure cabling in energy and data technology Business Unit Infrastructure & Datacom The demands on traic, data and infrastructure networks will rise in the future. Larger data bandwidths, global networking and increasing individual traic are associated with constraints on resources, cost pressures and environmental protection. Providing eicient, sustainable and safe power supply as well as energy and data distribution in buildings is the demand of tomorrow. LEONI s business unit Infrastructure & Datacom has realised these insights for quite some time and produces the quality connections of the future today already. Together with the Energy & Communication business unit, LEONI ofers futureproof complete solutions for building infrastructure cabling in energy and data technology. The innovative energy supply of tomorrow The exponentially increasing energy consumption is rising along with the growing urbanisation and mobility and also determines the trends in the energy industry. We try to face these insights successfully today already. With our products and services for energy production and distribution we want to make an active contribution to the prevention of today s energy loss in the future. Energy and communication will inevitably merge in the future. With the focus on intelligent energy grids we contribute to sparing the environment, resources and costs. For maximum safety in building cabling As a leading supplier in the market of structured building cabling, we combine competencies in energy and communications networks, public buildings, civil engineering, oices, data centres and industry. While increasingly complex applications confront the infrastructure with new challenges, we are obligated to provide maximum safety everywhere. Flexible system and connection solutions also make it possible to be prepared for tomorrow s connections today. Data networks of the future In order to do justice to the future exchange of data, we already ofer cabling systems that are structured and a safe investment. Bigger volumes of data, global linking and easily scalable data networks will shape the future. Requirements that we are confronting with innovative, safe and sustainable high-grade glass ibre and copper cables and modular cabling and connection systems. Cost-eiciency in every stage of the project Our service package BETAsolution provides on-site consulting from planning, projecting to logistics and installation all the way to project acceptance. Rising costs and time pressures combined with ever-higher requirements for materials and sustainability call for increasingly eicient project management. Major projects like the Gotthard Base Tunnel in Switzerland beneit not only from the comprehensive range but also from our knowledge and skill. BETAsolution reduces interfaces and considerably increases project eiciency. Specialists ensure comprehensive complete solutions worldwide and thus create a true competitive edge for our clients. Our long-standing tradition of producing innovative cable products is our pledge to constant peak performance. Starting with our competence centres in Däniken (Switzerland) and Stolberg (Germany), it is necessary to always plan ahead in the ields of development and research for our products. Connecting tomorrow s world today already then also means looking ahead. Constant advancement and research is our claim in this. We see complexity as a challenge. Being innovative to us means moving forward and simultaneously trusting in our competencies. We create connections that link people safely, quickly and convincingly today and tomorrow. For further information

6 6 Great brands, great service Put your trust in the best partner to suit your needs Our commitment to developing innovative products proves our dedication to our responsibility. In conjunction with our consulting services, we create trust and help our partners accomplish maximum safety for people and infrastructure in their projects. Infrastructure for maximum safety in cabling for buildings Investors, integrators, designers, installers and the trade you can now get all your cabling, connectivity and complete cabling solutions from a single source from copper and ibre optic technology to halogen-free energy cables, with or without circuit integrity. Constant safety, environmental compatibility and energy eiciency innovations complete the list of customer beneits. Global presence, consulting on site during all stages of a project as well as extensive experience gained in numerous projects and far-reaching synergies inside and outside the LEONI Group makes us international one of the most accredited partners in the ield of building and infrastructure cabling. Our products set the standard worldwide in buildings, in underground construction and in traffic infrastructure. Our cables based on our proprietary patented design and production processes ensure maximum safety and performance. The halogenfree, fire-resistant insulation materials meet all the relevant standards while their extended service life also presents a compelling advantage. Whether as laying systems or highly complex network systems, our full infrastructure range convinces customers worldwide. BETAflam according to the VDE standard Safety and installation cables BETAflam according to the British Standard BS 6387 Safety and installation cables BETAfixss with circuit integrity under fire acc. to DIN 4102 Certified installation systems

7 7 Datacom for maximum data integrity and bandwidth Energy the best connection for energy supply From the very beginning of the digital data era, we have fulilled data networking requirements for both the short term and the far future by using great innovation and a forward-looking approach. The profound expertise of the Infrastructure & Datacom BU in copper and ibre optical cabling technologies represents a powerful advantage in structured cabling systems for industry, data centres and oices the sustainable copper and glass ibre cables of our own production are among the safest and most innovative products in the primary to tertiary cabling market. MegaLine Copper cables and passive system components With innovative and sustainable solutions we face the dynamic development in the energy and communication market today already. As one of the leading system and development partners for energy production, transmission and distribution, we accept the responsibility for safe and sustainable energy supply. Our low- and medium-voltage power cables provide convincing durability and resist even the most adverse conditions. BETApower Cable for power generation BETAsolution Cost-efectiveness at every phase of the project GigaLine Fiber optical cables and passive system components VarioLine Modular system peripherals

8 8 Green Technology Our company aim is to combine innovation with sustainability. Our vision is to create sustainable connections in technological harmony with the natural resources. The cycle of nature gives us the best model to emulate. It is our responsibility to learn from nature and make use of it while conserving it and treating it with care. The growing scarcity of the natural resources and the increasing burden on the environment require a rethink on all levels of society. For LEONI, sustainability is an integral part of group policy. We are the first cable manufacturer in the world to develop a holistic concept for green technology. While trends like globalisation, mobility and urbanisation also determine the markets, sustainability and global responsibility are a central credo. To be considered the most innovative cable manufacturer for environmentally friendly technologies that is our goal. At that, it is of vital interest to us to detect the needs and requirements of tomorrow today and supply the markets of the future with sustainable, future-proof solutions. Green technology stands for the resource-conserving and lowemission production of sustainable quality cables made with low-pollution elements. We constantly work at optimising the efficiency with which resources are used in the manufacturing process by deploying energy-efficient machines or taking heat recovery measures. More and more locations in our global production network are environmentally certified according to the ISO standard. As a worldwide active and leading European supplier of wires, optical fibres, cables and cable systems for communication and infrastructure projects it is our responsibility to constantly optimise the sustainability and durability of our products, system solutions and services and thus lower the environmental load. We have to increase the amount of environmentally compatible raw materials in our cable products as well as the recyclability of processed materials or components and in doing so create end products that are developed for the environmental standard of tomorrow today. In conjunction with the ecological compatibility, future technologies are measured in terms of efficiency, service life, emission reduction and the conservation of natural resources. Innovative cable products and systems, holistic solutions and maximum performance in project management are the added value which we offer to our customers and business partners. These are also our cornerstones for strong connections into the future.

9 9 EU Directive 2012/19/EU on waste electrical and electronic equipment. EU Directive 2011/65/EU for restriction of the use of certain hazardous substances in electrical and electronic equipment. EU Regulation 1907/2006/EC (REACh) the chemical regulation of the European Union. There are various environmental directives in the European Union (EU). Directive 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) regulates the disposal of electrical and electronic equipment and components. The use of certain hazardous materials in electrical and electronic devices is defined by Directive 2011/65/EU RoHS 2 (Restriction of Hazardous Substances). Chemicals and materials in general are regulated by the law on chemical substances 1907/2006/ EC REACh (Registration, Evaluation, Authorisation and Restriction of Chemicals). This means avoiding the following substances, among others: Polybrominated diphenyl ether (PBDE) Decabromodiphenyl ether (DecaBDE) Perfluorooctane sulfonate (PFOS) Pentabromodiphenyl ether (PentaBDE) Octabromodiphenyl ether (OctaBDE) Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr VI) Polybrominated biphenyls (PBB) Cables and conductors and their associated connectors are only affected by Directive 2012/19/EU WEEE insofar as they are an internal part of the listed equipment and components. What does REACh mean? REACh REACh stands for Registration, Evaluation, Authorisation and Restriction of Chemicals. With REACh, the previous chemical law is basically harmonised, simplified and valid in all EU Member States. Cables and conductors have now been included in 2011/65/EU RoHS 2 since 2013 for the first time (Category 11 or as an internal component of the respective product). Fiber optic cables, power cables (>250 V) and installed fixed cables e.g. in premises are not concerned. The only permissible marking according to RoHS 2 is the CE marking, which is printed on the product package. Under REACh, there is a so-called candidate list with substance of very high concern (SVHC), which are subject to obligatory information and should be substituted in the long run. The list of candidate materials is updated twice per year by the European Chemicals Agency (ECHA) in Helsinki.

10 10 Technologies investment in sustainable security Universal application with high system integrity Our development and production centres LEONI Studer (Switzerland) and LEONI Kerpen (Germany) are linked by one thing in particular: competence. In extensive production areas, we work with state-of-the-art methods and systems in plastics processing, materials processing, extrusion technology, electron beam cross-linking and the testing of all products. We use state-of-the-art production equipment in order to offer our customers a maximum of safety and quality. New and innovative plastics mixtures and cables are constantly being developed in modern laboratories. The focus is on improved insulating properties, higher temperature tolerances, longer lifetimes, easy handling and better safety features. Our test laboratories for flammability tests, HF technology and optical measurement technology safeguard our quality standards and promote innovation. This is demonstrated by the large number of approvals and certificates coming from well-known independent testing institutes worldwide.

11 11 Halogen free IEC , EN Degree of acidity of combustion gases IEC , EN Smoke density IEC 61034, EN Flame retardancy IEC , EN , IEC + EN /-24 Circuit integrity DIN VDE , EN 50200, VdS 3423, VDE 0482 BS 8434 System integrity under fire DIN 4102 part 12 IT cabling systems Office EN , ISO/IEC IT cabling systems Industry EN , ISO/IEC IT cabling systems DataCenter EN , ISO/IEC Numerous national and international certificates confirm the company s ability to provide innovative solutions.

12 GigaLine 12 GigaLine FO data cables

13 Office DataCenter Industry 13 GigaLine GigaLine FO data cables GigaLine FO data cables The fiber 14 GigaLine FO data cables For LAN, WAN and SAN 17 GigaLine fiber qualities 18 GigaLine colour codes 19 GigaLine type codes 20 Buffered fiber sheaths- and jacketing material for optical cables 21 Rodent protection for fiber optic cables 22 Pictograms 23 Handling and safety notices 24 GigaLine FO data cables 25 o dc GigaLine Indoor cable, duplex fig 8 KL-I-V(ZN)H 2 G/E 25 o dc i GigaLine Indoor cable, duplex fig 0 KL-I-V(ZN)HH 2 G/E 26 o dc GigaLine Indoor cable, Mini-Breakout KL-I-V(ZN)H n G/E 27 o dc i GigaLine Breakout cable KL-I-V(ZN)HH n G/E 28 o dc i GigaLine Universal cable, Mini-Breakout 800 N KL-U-VQ(ZN)H n G/E 29 o dc i GigaLine Universal cable, central 2500 N KL-U-DQ(ZN)BH 1xn G/E 30 o dc i GigaLine Universal cable, stranded 4000 N KL-U-DQ(ZN)BH nxm G/E 31 o dc i GigaLine Universal cable, central 2500 N KL-U-DQ(ZN)H(SR)H 1xn G/E 32 o dc i o dc i LEONI fire secured FO data cables 33 GigaLine fire secured universal cable, central with CI GigaLine fire secured universal cable, central with CI KL-U-D(ZN)BH 1xn G/E System integrity at least 90 min KL-U-DQ(ZN)H(SR)H 1xn G/E System integrity at least 120 min o i GigaLine Outdoor cable, central 1750 N KL-A-DQ(ZN)B2Y 1xn G/E 36 o i GigaLine Outdoor cable, stranded 4000 N KL-A-DQ(ZN)B2Y nxm G/E 37 o i GigaLine Outdoor cable, central 1750 N KL-A-DQ(ZN)2Y(SR)2Y 1xn G/E 38 o i GigaLine Outdoor cable, stranded 4000 N KL-A-DQ(ZN)2Y(SR)2Y nxm G/E 39 o i GigaLine Outdoor cable, stranded with sheath, 4000 N KL-A-DF (ZN)(L) 2Y nxm G/E 40 page o Office cables dc DataCenter cables i Industrial cables

14 GigaLine 14 FO data cables GigaLine FO data cables The iber The steady increase in internet and intranet traffic, multimedia applications and the establishment of central storage networks (SAN or Storage Area Networks) in companies have fundamentally changed the traffic and load distribution in networks. New media require new, more powerful passive network infrastructures. LEONI offers a future-proof cabling system with reserves well beyond those stipulated in the standards. Comparison of requirements for Standard and GigaGrade Fiber category OM1 G62.5/125 at 850 nm Fiber category OM1 G62.5/125 at 1,300 nm Standard OM1 OM1e LEONI GigaGrade G62.5/125 M Standard OM1 OM1e LEONI GigaGrade G62.5/125 M Attenuation 3.5 db/km 3.0 db/km 1.5 db/km 0.8 db/km Modal bandwidth 200 MHz x km 250 MHz x km 500 MHz x km 800 MHz x km Gigabit Ethernet segment length 275 m 500 m 550 m 1,000 m 10 Gigabit Ethernet segment length 32 m 65 m 300 m 450 m Comparison of requirements for Standard and GigaGrade Standard OM2 Fiber category OM2 G50/125 Fiber category OM2 G50/125 at 850 nm OM2 LEONI Standard GigaGrade G50/125 OM2e LEONI High Performance GigaGrade G50/125 Standard OM2 at 1,300 nm OM2 LEONI Standard GigaGrade G50/125 OM2e LEONI High Performance GigaGrade G50/125 Attenuation 3.5 db/km 2.7 db/km 2.5 db/km 1.5 db/km 0.8 db/km 0.7 db/km Modal bandwidth 500 MHz x km 500 MHz x km 600 MHz x km 500 MHz x km 500 MHz x km 1200 MHz x km Gigabit Ethernet segment length 10 Gigabit Ethernet segment length 550 m 550 m 750 m 550 m 550 m 2,000 m 82 m 82 m 150 m 300 m 300 m 700 m The right fiber LEONI offers a comprehensive range of optical fibers tailored to the various network requirements such as future-proof high-performance transmission in DataCenters, reliable office networks and stable industrial networks. LEONI Multimode fibers GigaLine cables offer immediate, significant added value for your operation. At no additional charge, the fiber optic cables are now equipped with bend insensitive OM3 and OM4 fibers (j-bendable). Advantages of j-bendable fibers Greater reliability with higher packing density and installation in constricted areas due to the low bending loss. Low-risk patching in operation the data transmission remains stable despite significant bending. The doubled tensile strength of the fibers minimises the risk of a fiber tear in the patch field (200 kpsi in comparison to the standard with 100 kpsi). Maximum security for a mix and match with fibers of other manufacturers due to the minimum transition damping. Made in Germany j-bendable fibers are manufactured by the LEONI subsidiary j-fiber GmbH in Jena Germany's only specialists for fiber production. Learn more at

15 Office DataCenter Industry FO data cables 15 GigaLine The optimum multimode fiber for every application: GigaGrade GigaGrade j-bendable j-bendable OM1 OM2e OM3 OM4 LAN Datacenter LAN Oice LAN Industry Comparison of requirements for Standard and OptiGrade Fiber category OM3 G50/125 Fiber category OM3 G50/125 Standard OM3 at 850 nm OM3 LEONI j-bendable OM3 Standard OM3 at 1,300 nm OM3 LEONI j-bendable OM3 Attenuation 3.5 db/km 2.5 db/km 1.5 db/km 0.7 db/km Modal bandwidth (overfilled launch) 1500 MHz x km 1,500 MHz x km 500 MHz x km 500 MHz x km EMB (effective modal bandwidth) 2000 MHz x km 2,000 MHz x km n.a. n.a. Gigabit Ethernet segment length 550 m 900 m 550 m 550 m 10 Gigabit Ethernet segment length 300 m 300 m 300 m 300 m 40/100 Gigabit Ethernet segment length 100 m 100 m 100 m 100 m Comparison of requirements for Standard and OptiGrade Fiber category OM4 G50/125 Fiber category OM4 G50/125 Standard OM4 at 850 nm OM4 LEONI j-bendable OM4 Standard OM4 at 1,300 nm OM4 LEONI j-bendable OM4 Attenuation 2.5 db/km 2.5 db/km 1.5 db/km 0.7 db/km Modal bandwidth (overfilled launch) 3,500 MHz x km 3,500 MHz x km 500 MHz x km 500 MHz x km EMB (effective modal bandwidth) 4,700 MHz x km 4,700 MHz x km n.a. n.a. Gigabit Ethernet segment length 550 m 1000 m 550 m 550 m 10 Gigabit Ethernet segment length 550 m 550 m 300 m (LX4) 300 m (LX4) 40/100 Gigabit Ethernet segment length 150 m 150 m 150 m 150 m j-bendable OM3 for 10 GbE networks The sophisticated IT cabling in DataCenters and office buildings, with a 10 Gigabit Ethernet-compatible network, is based on the laser-optimised j-bendable OM3 fiber. j-bendable OM4 future-proof without compromise The j-bendable OM4 multimode fiber fulfils the requirements of the OM4 standard for the serial transmission of 10 Gbit/s with an EMB of 4,700 MHz x km over 550 m. The fiber has been optimised for applications with 850 nm VCSEL and offers the possibility of use at higher transmission rates such as 40 Gbit/s or 100 Gbit/s going into the future. j-bendable OM4 is the first choice when it comes to speed and high data rates.

16 GigaLine 16 FO data cables Comparison of requirements for Standard and j-lwp SMF+ Standard OS2 IEC B6_a at 1,310 nm Fiber category OS2 E9/125 (G.652.D) LEONI OS2 j-lwp SMF+ Standard OS2 IEC B1.3 at 1,550 nm LEONI OS2 j-lwp SMF+ Attenuation 0.40 db/km 0.36 db/km 0.30 db/km 0.23 db/km Attenuation at 1,383 nm < 0.40 db/km 0.36 db/km 1 Gigabit Ethernet segment length 5,000 m 5,000 m 10 Gigabit Ethernet segment length 10,000 m 10,000 m 22,250 m 40,000 m 40 Gigabit Ethernet segment length 10,000 m 10,000 m Comparison of requirements for Standard and j-lbl SMF Standard OS2 IEC B6_a at 1,310 nm Fiber category OS2 E9/125 low bend (G.657.A) LEONI OS2 low blend j-lbl SMF Standard OS2 IEC B6_a at 1,550 nm LEONI OS2 low blend j-lbl SMF Attenuation 0.40 db/km 0.36 db/km 0.30 db/km 0.23 db/km Attenuation at 1,383 nm < 0.40 db/km 0.36 db/km 1 Gigabit Ethernet segment length 5,000 m 5,000 m 10 Gigabit Ethernet segment length 10,000 m 10,000 m 22,250 m 40,000 m 40 Gigabit Ethernet segment length 10,000 m 10,000 m 100 Gigabit Ethernet segment length 10,000 / 40,000 m 10,000 / 40,000 m Attenuation [db] j-lwp SMF+ proven for long links The low-water-peak singlemode fiber, j-lwp SMF+ as per ITU-T G652.D or as per EN OS2, offers the best transmission performance across the entire wavelength range from 1,260 nm to 1,625 nm. The fiber can be used in the wavelength ranges from 1,360 nm to 1,480 nm due to the reliably stable, low attenuation at 1,383 nm. The j-lwp SMF+ is the preferred fiber wherever maximum flexibility and long transmission lengths are required. The use of WDM systems enables the full spectrum of fiber capacity to be used the prerequisite for flexible network planning. The fiber is fully compatible with installed singlemode networks and enables network solutions with maximum performance and flexibility. Bending sensitivity at diferent wavelengths 1,310 nm 1,550 nm 1,625 nm Bending diameter [mm] j-lbl SMF flexible and compatible The j-lbl SMF as per ITU-T G657.A is a high-performance fieldtested singlemode fiber for applications where the need for compatibility with installed G.652.D networks is linked with the requirement for improved bending characteristics for sturdy, flexible and space-saving installations. The j-lbl SMF offers maximum transmission performance with minimum attenuation. Due to the reliably and permanently low attenuation at 1,383 nm, it can be used in the wavelength range from 1,360 nm to 1,480 nm and the fiber is therefore also suitable for wavelength multiplexing (DWDM and CWDM). The fiber exhibits excellent splicing properties thanks to its firstrate uniformity and geometry. This means it is backwards compatible with already installed conventional singlemode fibers (to ITU-T G.652.A+B) and low-water-peak singlemode fibers (to ITU-T G.652 C+D). Bending characteristics Macro-bending losses, bending-induced attenuation 10 bends, radius 15 mm 1 bend, radius 10 mm Values Unit 1,550 nm 0,03 db 1,652 nm 0,20 db 1,550 nm 0,30 db 1,625 nm 1,00 db

17 Office DataCenter Industry FO data cables 17 GigaLine GigaLine FO data cables for LAN, WAN and SAN The use of fiber optic data cables is especially recommended if electromagnetic influences can occur reliable potential isolation is required a wide transmission bandwidth is required low attenuation and therefore long transmission links are required crosstalk is not permitted sparking (for areas subject to explosion hazards) is not permitted low weight and small dimensions are an advantage increased security against interception is required The product range at a glance: Easy-to-assemble indoor cables with compact buffered fiber technology for the patch and horizontal areas Universal cables for the backbone area indoors and outdoors Outdoor cables for LAN and WAN applications A wide range of designs such as outdoor cables with corrugated steel cladding steel band or steel wire armour additional lead covering as protection against chemicals Gigabit, 10, 40 and 100 Gigabit Ethernet strictest requirements for the quality of the fiber optic cabling. The Ethernet protocol is the state of the art today in every area of structured cabling. The corresponding standards for transmission rates from 1 Gigabit/s to 100 Gigabit/s are defined in IEEE 802.3ba. Attenuation [db/km] Comparison SMF G652B / G652D ITU T 652B ITU T 652D The process used to manufacture the fibers has been optimised in such a way that the profile of the multimode fiber is extremely precise and disturbances in the fiber core are virtually eliminated. As differential mode delay does not occur under these circumstances, mode-conditioning patch cords are not necessary. For more than ten years now, the standard versions of fiber optic cables with an improved gradient fiber G50/125 from the category "OM2e" have provided bandwidth-length products of 600 MHz x km in the first window (850 nm) and 1,200 MHz x km in the second window (1,300 nm) as well as Gigabit Ethernet segment lengths of 750/2,000 m. GigaLine fiber optic cables with OM3 and OM4 fibers are the optimum transmission medium, whatever the future might hold. Using the OM4 fibers with a laser bandwidth of 4,700 MHz x km in the first window enables segment lengths of up to 550 m with 10 GbE, up to 300 m with 16 Gbit/s Fiberchannel or up to 150 m with 40 and 100 GbE. This in turn enables cost-effective realisation of 10 GbE in the backbone of a building in nearly all cases. Singlemode fibers must be used over long distances. The singlemode fibers exceed the current requirements of the OS2 standard according to EN with attenuation of just 0.36 db/ km at 1,310 nm and less than 0.22 db/km at 1,550 nm. This means that the wavelength ranges around 1,383 nm can also be used to increase the transmission capacity. The graph shows the steadily dropping attenuation curve from 1,300 nm to 1,625 nm for all singlemode fibers. These characteristics and the PMD link design value of just 0.06 ps/ km guarantee large reserves for faster transmission rates over very long distances and WDM transmission systems. The use of high-quality optical fibers is the key to managing future data volumes. GigaLine Fiber optic data cables are the first step in careful planning and implementation of a passive network infrastructure Wavelength [nm]

18 GigaLine 18 FO data cables GigaLine Fiber qualities Fiber specifications GigaGrade G62.5/125 j-bendable G50/125 GigaGrade G50/125 j-bendable G50/125 j-bendable G50/125 j-lwp SMF+ E9...10/125 j-lwp SMF+ E9...10/125 OptiGrade IEC 11801/EN OM1e OM2 OM2e OM3 OM4 OS2 OS2 low bend IEC A1b A1a.1 A1a.1 A1a.2 A1a.3 B1.3 B6_a ITU-T G.651 G.651 G.651 G.651 G.652.D G.657.A Attenuation coefficient db/km at 850 nm db/km at 1,300 nm max. 3.0 max. 0.7 max. 2.7 max. 0.8 max. 2.5 max. 0.7 max. 2.5 max. 0.7 max. 2.5 max. 0.7 db/km at 1,310 nm db/km at 1,383 nm db/km at 1,550 nm db/km at 1,625 nm Bandwidth MHz x km at 850 nm min. 250 min. 500 min. 600 min. 1,500 min. 3,500 MHz x km at 1,300 nm min. 800 min. 500 min. 1,200 min. 500 min. 500 Laser bandwidth MHz x km at 850 nm min. 2,000 min. 4,700 max max max max max max max max Dispersion at 1,310 nm max. 3.5 ps/nm x km max. 3.5 ps/nm x km at 1,550 nm max. 18 ps/nm x km max. 18 ps/nm x km Zero-dispersion wavelength 1,302 λ 0 1,322 1,302 λ 0 1,322 Zero-dispersion slope ps/nm² x km ps/nm² x km PMD Fiber < 0.1 ps/ km < 0.1 ps/ km Link < 0.06 ps/ km < 0.06 ps/ km Segment length with Gigabit Ethernet at 850 nm (1000 BASE SX) 500 m 550 m 750 m 900 m 1,000 m at 1,300 nm (1000 BASE LX) 1,000 m 550 m 2000 m 550 m 550 m 5,000 m 5,000 m Segment length with 10 Gigabit Ethernet at 850 nm (10G BASE-SR/SW) 65 m 82 m 150 m 300 m 550 m at 1,300 nm (10G BASE-LX4) 450 m 300 m 700 m 300 m 300 m 10,000 m 10,000 m at 1,550 nm (10G BASE-ER/EW) 40,000 m 40,000 m Segment length with 40/100 Gigabit Ethernet at 850 nm 40/100 GBASE-SR4/SR m 150 m at 1,310 nm 40/100 GBASE-LR4 10,000 m 10,000 m Numerical aperture Nominal value Refractive index (nominal value) at 850 nm at 1,300 nm at 1,310 nm at 1,550 nm Proof load 100 kpsi 8.8 N 200 kpsi 17.6 N 100 kpsi 8.8 N 200 kpsi 17.6 N 200 kpsi 17.6 N 100 kpsi 8.8 N 100 kpsi 8.8 N

19 Office DataCenter Industry FO data cables 19 GigaLine GigaLine colour codes Wires (with stranded loose tubes) Counting wire Counting direction wire Red White Other wires Green for G50/125 Dummy elements Bue for G62.5/125 Yellow for E9 10/125 Natural colours The wires are consecutively counted, starting with the wire closest to the counting element. The dummy elements are not counted. Mini-Breakout cable EIA/TIA 598C Fiber no. Colour 1 Blue 2 Orange 3 Green 4 Brown 5 Grey 6 White 7 Red 8 Black 9 Yellow 10 Violet 11 Pink 12 Turquoise Fibers (in loose tubes) IEC Fiber no. Colour 1 Red 2 Green 3 Blue 4 Yellow 5 White 6 Grey 7 Brown 8 Violet 9 Turquoise 10 Black 11 Orange 12 Pink 13 Red/black 14 Green/black 15 Blue/black 16 Yellow/black 17 White/black 18 Grey/black 19 Brown/black 20 Violet/black 21 Turquoise/black 22 Natural/black 23 Orange/black 24 Pink/black

20 GigaLine 20 FO data cables GigaLine Type codes for easy assignment of the construction elements in iber optic cables GigaLine Cable type Communication cable KL Field of application Indoor cable Universal cable Outdoor cable Breakout outdoor cable I U A AT Buffered fiber Tight buffered loose tube Gel-filled loose tube V D Constructional composition Swelling material, dry, longitudinally watertight Water-blocking gel-filled, longitudinally watertight Non-metallic strain relief Steel strain relief Armour Corrugated steel tape Q F (ZN) (ZS) B (SR) Cable sheath PE Polyethylene sheath 2Y Al + PE PE coated aluminium sheath (L)2Y FRNC Halogen-free/flame-retardant sheath H PVC Polyvinyl chloride sheath Y PA Polyamide sheath 4Y PUR Polyurethane sheath 11Y Fiber number and fiber bundling Number of fibers Number of loose tubes x number of fibers per tube n nxm Miscellaneous n Field diameter/sheath diameter in E9/125 n Core diameter/sheath diameter in G50/125 or G62.5/125 Wavelength 850 nm B 1,300/1,310 nm F 1,550 nm H Bandwidth/dispersion coefficient in MHz km in ps/nm km with multimode fibers, dispersion parameters with singlemode fibers

21 Office DataCenter Industry FO data cables 21 GigaLine Jacketing material for optical cables Balancing application and fire prevention criteria The sheath around the cable protects the optical fiber(s) from the effects of mechanical, thermal and chemical action as well as the ingress of moisture. In the event of a fire, however, the cable sheath should prevent a fire from spreading and stop toxic and corrosive gases from being produced. The use of halogen-free, flame-retardant materials is advisable in order to protect equipment and buildings but above all to protect people. In harsh environments, PUR and PVC, in particular, are used owing to their high resistance to oils and their abrasion resistance. PE is also commonly used as a sheath material for outdoor applications. However, it is often extremely difficult to meet all the requirements using just one sheath material. To best satisfy the prevailing local operating conditions, LEONI offers a choice of different materials. Please contact us if the criteria for your particular application are not met by the cable constructions in this catalogue. Additional requirements can often be met through customised measures when making the sheath (e.g. aluminium tape or special mixtures of sheaths). Cable sheath material Material characteristics FRNC PUR PVC PE Resistance to aging Halogen-free Flame retardancy + + / Elasticity + Abrasion resistance / Low smoke gas generation ++ / Low emission of corrosive gases ++ +/ Low smoke gas toxicity ++ +/ No toxicological risk ++ +/ General resistance to FRNC PUR PVC PE UV light 1) 1) 1) 1) Water absorption + + Gas difusion 2) Fuels + +/ + Petroleum/lubricants excellent + good depends on recipe weak inadequate 1) UV resistance can be increased by adding black colour pigments or UV stabilisers 2) Permeation depends on the type of gas, e.g. Ar, CH 4, N 2, O 2 low gas permeation, CO 2, H 2, He higher gas permeation 3) Low swelling in saturated hydrocarbons; signiicant swelling in aromatic hydrocarbons. Aliphatic esters cause swelling, highly polar organic solvents dissolve under the efect of extreme swelling 4) Swelling in aliphatic and aromatic hydrocarbons and in chlorinated hydrocarbons Organic solvents + 3) + 4) Alcohol + + Oxidants + Acids Alkaline solutions Saline solutions + + +

22 GigaLine 22 FO data cables Rodent protection for fiber optic cables Fiber optic cables are relatively thin and therefore very susceptible to rodent damage. Depending on the application it is important that fiber optic cables can offer protection against this type of damage. There are no national or indeed international standards or test specifications covering the corresponding requirement for rodent protection. The following construction has been customary in the market in Europe (particularly in Germany, Austria and Switzerland) since the early 1990s: For outdoor cables, the usual aramid yarns for strain relief are replaced with glass rovings. These glass yarns shatter and get into the mouth and throat of the rodents. The animals associate gnawing on cables with pain and usually stop. The general rule is: The more glass rovings, the greater the protection for the cable. The overall diameter should also be as large as possible. Constructions with stranded loose tubes give even less favourable leverage in combination with the larger core diameter. The cable then acts like a gag bit. Before the rodent reaches the glass rovings, however, it first has to gnaw through the outer sheath. Constructions with an additional polyamide sheath (thickness 0.5 mm) have also proven themselves here as polyamide is very hard and smooth. Metal armouring must be recommended as rodent protection for all applications where rodent damage is to be expected. This is the case, for example, with installation in shafts or conduits with a correspondingly large diameter, e.g. along railway lines or motorways. The following types of metal armouring are available: Corrugated steel cladding The most common metal armouring is the mm thick corrugated steel cladding due to its very good flexibility. Steel wire armour The steel wire armour made from wires with a thickness of up to 1.25 mm is very robust. Steel band Steel band sheathing consists of two overlapping layers of steel band that are wound around the cable. In the case of cables with two sheaths with sheathing between them, the ingress of water into the cable core is also prevented provided the internal sheath is not damaged. This combination of plastic, glass and moisture-absorbing swelling material has to be gnawed through before rodent reaches the loose tubes containing the internal optical fibers. Despite all precautions, however, damage to the outer sheath can never be fully ruled out.

23 Office DataCenter Industry FO data cables 23 GigaLine Pictograms Flame-retardant and halogen-free sheath The outer sheath of the cable is self-extinguishing and does not propagate fire. The halogen-free sheath material forms neither toxic nor corrosive combustion gases in the event of fire. Chemical resistance Generally good resistance to oil, petrol, acids and alkaline solutions. Rodent proof The cable core is protected against damage by rodents with glass rovings. Note: Despite all the precautions, damage to the outer sheath can never be fully ruled out. Rodent proof The cable core is more heavily protected against damage by rodents with two sheaths and metal armouring. Note: Despite all the precautions, damage to the outer sheath can never be fully ruled out. Resistance to UV rays The cable outer sheath is resistant to UV rays.

24 GigaLine 24 FO data cables Handling and safety notices when using optical cables Please note the following when installing optical fibers: Valid installation regulations for optical fibers Valid industrial safety guidelines for handling optical fibers VDE regulations (DIN EN Parts 1 to 3, Cabling installation) The following regulations also apply: The drums must always be stored and transported standing on their flanges Please note the limit values specified in the respective data sheet Do not remove the protective packaging from the cable ends during installation Do not go below the permitted bending radius (see data sheet) Avoid soiling and mechanical loading of the assembled connectors Do not exceed the maximum tensile load of the cable in axial direction before, during and after installation (use suitable aids) The maximum tensile load only applies in conjunction with adhesion with the strain relief elements Installation is not permitted if the ambient temperature is exceeded or gone below (specific value in the data sheet) Cable runs must be selected so as to avoid mechanical loads as far as possible and also minimise future loads Mechanical stresses, for example caused by movement, must be prevented, even during provisional installation Compression of the outer sheath, for example by cable ties, must be avoided when securing the cables After installation: carefully free the cable ends from the packaging/pull tool All cable ends must be protected from the ingress of moisture before, during and after installation Immersion with water must be avoided the fibers and connectors must not come into contact with water Optical fibers must be unwound from the coil or ring without torsion so that no kinks or twists can occur Install optical cables with extreme care. Please make sure that the fibers are neither overstretched nor compressed in addition to immediate damage, this also poses the threat of problems with the long-term behaviour When installing in protective conduits, please make sure that these have no sharp edges and that kinks are avoided The attenuation of each cable must be checked immediately after installation using a suitable calibrated meter, otherwise warranty claims may arise Body and eye protection must be worn when handling bare fibers from glass optical fibers, including if the cable is damaged Please note all regulations relating to eye safety

25 Office DataCenter Industry FO data cables 25 GigaLine GigaLine Indoor cable, duplex ig 8 Advantages very flexible cable more than twice the bandwidth with OM2e fibers for applications up to 40/100G ➊ ➋ ➌ Type KL-I-V(ZN)H 2 G/E Application Connection cable and patch cord for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Suitable for direct connector assembly. Installation in dry areas, in cable ducts, on cable trays or in conduits. Construction ➊ Two single cables (2.8 mm with 900 µm semi-ight buffered loose tubes) with strain relief in fig. 8 sheath with separator ➋ Strain relief Non-metallic (aramid yarns) ➌ Cable sheath Halogen-free, flame-retardant compound Sheath colour OS2 Yellow OM1e/OM2e Orange OM3 Aqua OM4 Heather violet Thermal characteristics Transport/storage Installation Operating temp. 25 C up to +70 C 5 C up to +50 C 10 C up to +70 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 30 mm 15 mm (over flat side) dynamic 60 mm 30 mm Max. crush strength long-term 600 N/dm short-term 1000 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC , Cat. A No. of fibers Buffered fibertyp Outer diam. approx. Weight approx. Max. strain relief Fire load approx. µ mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/ x LKD 8DB LKD 8DA LKD 8DA LKD 8DA LKD 8DC x LKD 8XB LKD 8XA LKD 8XA LKD 8XA LKD 8XC

26 GigaLine 26 FO data cables GigaLine Indoor cable, duplex ig 0 Advantages robust more than twice the bandwidth with OM2e fibers for applications up to 40/100G ➊ ➋ ➌ Type KL-I-V(ZN)HH 2 G/E Application Connection cable and patch cord for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Suitable for direct connector assembly. Installation in dry areas, in cable ducts, on cable trays or in conduits. Construction ➊ Two single cables with strain relief (2.1 mm with 900 µm semitight buffered fibers) running parallel under one sheath ➋ Strain relief Non-metallic (aramid yarns) ➌ Cable sheath Halogen-free, flame-retardant compound Sheath colour OS2 Yellow OM1e/OM2e Orange OM3 Aqua OM4 Heather violet Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 10 C up to +70 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 35 mm 20 mm dynamic 65 mm 35 mm for single elements 30 mm 15 mm Max. tensile force long-term 600 N Max. crush strength long-term 500 N/dm short-term 750 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC , Cat. A Further characteristics Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/ x LKD 8DB LKD 8DA LKD 8DA LKD 8DA LKD 8DC

27 Office DataCenter Industry FO data cables 27 GigaLine GigaLine Indoor cable, Mini-Breakout Advantages flexible space-saving more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-I-V(ZN)H n G/E Application Campus/backbone cabling, suitable for direct connector assembly. Connection cable and patch cord for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Installation in dry areas, in cable ducts, on cable trays or in c onduits. Construction ➊ Up to 12 semi-tight buffered fibers (900 µm) stranded under one outer sheath ➋ Strain relief Non-metallic (aramid yarns) ➌ Cable sheath Halogen-free, flame-retardant compound Sheath colour OS2 Yellow OM1e/OM2e Orange OM3 Aqua OM4 Heather violet ➊ ➋ ➌ Thermal characteristics Transport/storage Installation Operating temp. 25 C up to +70 C 5 C up to +50 C 10 C up to +70 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 10 x outer Ø 10 mm dynamic 15 x outer Ø 15 mm for single elements 30 mm Max. tensile force long-term 600 N Max. crush strength long-term 500 N/dm short-term 1000 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC , Cat. A Further characteristics Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/ LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC LKD 8MB LKD 8MA LKD 8MA LKD 8MA LKD 8MC

28 GigaLine 28 FO data cables GigaLine Breakout cable Central element Advantages robust, crush resistant each fiber is strain-relieved more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-I-V(ZN)HH n G/E Application Connection cable and patch cord for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Suitable for direct connector assembly. Installation in dry areas, in cable ducts, on cable trays or in conduits. Construction ➊ Up to 12 single cables with strain relief as breakout elements (2.1 mm with 900 µm semi-tight buffered fibers) stranded under one outer sheath ➋ Ripcord under the outer sheath ➌ Strain relief Non-metallic (aramid yarns) ➍ Cable sheath Halogen-free, flame-retardant compound Sheath colour OS2 Yellow OM1e/OM2e Orange OM3 Aqua OM4 Heather violet ➊ ➌ ➋➍ Thermal characteristics Transport/storage Installation Operating temp. 25 C up to +70 C 5 C up to +50 C 10 C up to +70 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter for single elements 30 mm 15 mm Max. crush strength long-term 1000 N/dm short-term 1500 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC , Cat. A Further characteristics Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9...10/ LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC , LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC , LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC , LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC , LKD 8BB LKD 8BA LKD 8BA LKD 8BA LKD 8BC

29 Office DataCenter Industry FO data cables 29 GigaLine GigaLine Universal cable, Mini-Breakout 800 N Advantages flexible & space-saving universal use longitudinally watertight more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-U-VQ(ZN)H n G/E Application Campus/backbone cabling, suitable for direct connector assembly. Connection cable and patch cord for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF House connections possible without additional interconnection points (splices). Installation indoors and outdoors in dry conduits, on covered cable trays or in cable ducts. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. ➊ ➋ ➌ Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +60 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 10 5 x outer diameter dynamic x outer diameter for single elements mm Max. crush strength long-term 300 N/dm short-term 500 N/dm Construction ➊ Up to 24 tight buffered fibers (900 µm) stranded under one outer sheath Buffered fiber colour code acc. to EIA/TIA598C ➋ Strain relief Non-metallic (aramid yarns) ➌ Cable sheath Halogen-free, flame-retardant compound Sheath colour Yellow Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC , Cat. A Further characteristics Longitudinal watertightness IEC F5 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9...10/ LKD 8NB LKD 8NA LKD 8NA LKD 8NA LKD 8NC LKD 8NB LKD 8NA LKD 8NA LKD 8NA LKD 8NC LKD 8NB LKD 8NA LKD 8NA LKD 8NA LKD 8NC

30 GigaLine 30 FO data cables GigaLine Universal cable, central 2500 N Advantages can be laid in the ground universal use longitudinally watertight more than twice the bandwidth with OM2e fibers for applications up to 40/100G with OM3 and OM4 fibers Type KL-U-DQ(ZN)BH 1xn G/E Application Installation cable, suitable for campus/backbone cabling and for structured cabling acc. to ISO/IEC and EN (2nd edition). Ideal for all applications from Classes OF 300, OF 500, OF 2000, OF 5000 and OF Suitable for installation indoors in applications involving increased mechanical requirements as well as risk of rodent damage. Suitable for splicing. House connections possible without additional interconnection points (splices). Installation indoors and outdoors in conduits, on covered cable trays, in cable ducts or directly in the ground (in a bed of sand). Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Central filled loose tube with max. 24 fibers, up to 12 fibers diameter 2.9 mm, up to 24 fibers diameter 3.5 mm Fiber colour code acc. to IEC 60304, Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Swellable threads ➌ Strain relief Non-metallic (glass rovings) ➍ Cable sheath Halogen-free, flame-retardant compound Sheath colour Black ➊ ➋ ➌ ➍ Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 2000 N/dm short-term 3500 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 Resistance to microbes No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M x LKD 8UB7 00M LKD 8UA2 00M LKD 8UA500M LKD 8UA7 00M LKD 8UC7 00M9 0000

31 Office DataCenter Industry FO data cables 31 GigaLine GigaLine Universal cable, stranded 4000 N Advantages can be laid in the ground universal use longitudinally watertight more than twice the bandwidth with OM2e fibers for applications up to 40/100G with OM3 and OM4 fibers Type KL-U-DQ(ZN)BH nxm G/E Application Installation cable, suitable for campus/backbone cabling and for structured cabling acc. to ISO/IEC and EN (2nd edition). Ideal for applications from Classes OF 300 to OF Suitable for installation in applications involving increased mechanical requirements as well as risk of rodent damage. Suitable for splicing. House connections possible without additional interconnection points (splices). Installation indoors and outdoors in conduits, on covered cable trays, in cable ducts or directly in the ground (in a bed of sand). Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Stranded filled loose tube with up to 12 fibers and blind elements, if applicable Fiber colour code acc. to IEC Loose tube colour: Counting wire red, counting direction wire white, yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Central GFR strength member ➌ Swellable threads ➍ Strain relief Non-metallic (glass rovings) ➎ Cable sheath Halogen-free, flame-retardant compound Sheath colour Black ➊ ➋ ➌ ➍ ➎ Thermal characteristics Transport/storage Installation Operating temp. Mechanical characteristics Min. bending radius static 40 C up to +70 C 5 C up to +50 C 40 C up to +60 C dynamic Max. crush strength long-term Fire performance short-term Smoke density IEC Halogen free IEC x outer diameter 20 x outer diameter 3000 N/dm 4000 N/dm Flame retardancy IEC , IEC Further characteristics Longitudinal watertightness Impact resistance Cable bending Resistance to microbes IEC F5 IEC E4 IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9...10/125 2x LKD 8UB7 1K LKD 8UA2 1K LKD 8UA5 1K LKD 8UA7 1K LKD 8UC7 1K x LKD 8UB7 1K LKD 8UA2 1K LKD 8UA5 1K LKD 8UA7 1K LKD 8UC7 1K x LKD 8UB7 1K LKD 8UA2 1K LKD 8UA5 1K LKD 8UA7 1K LKD 8UC7 1K x LKD 8UB7 1K LKD 8UA2 1K LKD 8UA5 1K LKD 8UA7 1K LKD 8UC7 1K Further types on request

32 GigaLine 32 FO data cables GigaLine Universal cable, central 2500 N Advantages optimal rodent armouring can be laid in the ground universal use longitudinally and transversally waterproof more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-U-DQ(ZN)H(SR)H 1xn G/E ➊ ➋ ➌ ➍ ➎ Application Installation cable, suitable for campus/backbone cabling and for structured cabling acc. to ISO/IEC and EN (2nd edition). Ideal for all applications from Classes OF 300, OF 500, OF 2000, OF 5000 and OF Suitable for installation in applications involving increased mechanical requirements as well as risk of rodent damage. Suitable for splicing. House connections possible without additional interconnection points (splices). Installation indoors and outdoors in dry conduits, on covered cable trays, in cable ducts or directly in the ground. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Central filled loose tube with max. 24 fibers, up to 12 fibers diameter 2.9 mm, up to 24 fibers diameter 3.5 mm Fiber colour code acc. to IEC 60304, Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Strain relief Non-metallic (glass rovings) ➌ Inner sheath Halogen-free, flame-retardant compound Inner sheath colour Black ➍ Armouring Corrugated steel cladding ➎ Cable sheath Halogen-free, flame-retardant compound Sheath colour Black Thermal characteristics Transport/storage Installation Operating temp. 25 C up to +70 C 5 C up to +50 C 25 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 2500 N/dm short-term 3500 N/dm Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 Resistance to microbes No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K x LKD 8UB7 99K LKD 8UA2 99K LKD 8UA5 99K LKD 8UA7 99K LKD 8UC7 99K9 0000

33 Office DataCenter Industry FO data cables 33 GigaLine LEONI ire secured FO data cables with a ire barrier to protect the ibers in the event of a ire A functioning communication system is of vital importance in the event of a fire. It is therefore vital that a fiber optic cable maintains its. The results of the fire tests certify that the "fire secured" fiber optic data cables maintain their system integrity and their insulation integrity for 90 and 120 minutes respectively in the event of a fire. In particular in public facilities and buildings where large numbers of people gather (e.g. tunnels, airports, hotels, etc.), fire alarm, SOS telephone and video monitoring systems are used to coordinate rescue measures and fire fighting efforts as efficiently as possible. Also in industrial facilities, processes have to be terminated in a controlled manner in order to avoid serious secondary damage to humans and the environment. Modern communication systems are increasingly using optical data transmission systems for transmitting data. These are often the only option given the high requirements for data rates and transmission paths. With its "fire secured" universal cables, LEONI offers products which are tested according to IEC and EN and protect the fibers from exposure to fire thanks to their special construction with a fire barrier.

34 GigaLine 34 FO data cables GigaLine Fire secured universal cable, central with CI Advantages system integrity during exposure to fire for at least 90 minutes more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-U-D(ZN)BH 1xn G/E ➊ ➋ ➌ ➍ ➎ Application Installation cable suitable for campus/backbone cabling and structured cabling acc. to ISO/IEC and EN (2nd edition). Ideal for all applications from Classes OF 300 to OF Suitable for installation in applications involving increased mechanical requirements as well as risk of rodent damage. Suitable for splicing. House connections possible without additional interconnection points (splices). Installation in dry areas, in cable ducts, on cable trays or in conduits. Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 3000 N/dm short-term 4500 N/dm Construction ➊ Central filled loose tube with max. 24 fibers, up to 12 fibers diam. 3.5 mm, up to 24 fibers diam. 4.0 mm ➋ with fire protection barrier Fiber colour code acc. to IEC 60304, Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125) ➌ Strain relief Non-metallic (glass rovings) ➍ Cable sheath Halogen-free, flame-retardant compound ➎ Ripcords under the sheath Sheath colour Yellow Fire performance Smoke density IEC Halogen free IEC Flame retardancy IEC , IEC Further characteristics Total system and Acc. to IEC and -25 insulation integrity EN 50200/DIN VDE 0482 Part 1 (90 minutes) Max. change in attenuation 2.0 db No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B x LKD 8UB7 00B LKD 8UA2 00B LKD 8UA5 00B LKD 8UA7 00B LKD 8UC7 00B9 0000

35 Office DataCenter Industry FO data cables 35 GigaLine GigaLine Fire secured universal cable, central with CI Advantages system integrity during exposure to fire for at least 120 minutes optimal rodent armouring longitudinally and transversally waterproof more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-U-DQ(ZN)H(SR)H 1xn G/E ➊ ➋ ➌ ➍ ➎ Application Installation cable suitable for campus/backbone cabling and structured cabling acc. to ISO/IEC and EN (2nd edition). For applications from Classes OF 300 to OF Suitable for installation in applications involving increased mechanical requirements as well as risk of rodent damage. Suitable for splicing. House connections possible without additional interconnection points (splices). Installation indoors and outdoors in dry conduits, on covered cable trays or in cable ducts. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Central filled loose tubes with max. 24 fibers, up to 12 fibers diam. 3.5 mm, up to 24 fibers diam. 4.0 mm Fiber colour code acc. to IEC 60304, Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Strain relief Non-metallic (glass rovings) ➌ Inner sheath Halogen-free, flame-retardant compound ➍ Armouring Corrugated steel sheath as fire protection barrier and rodent protection ➎ Cable sheath Halogen-free, flame-retardant compound Sheath colour Yellow Thermal characteristics Transport/storage Installation Operating temp. Mechanical characteristics Min. bending radius static 25 C up to +70 C 5 C up to +50 C 25 C up to +60 C dynamic Max. crush strength long-term Fire performance short-term Smoke density IEC Halogen free IEC x outer diameter 20 x outer diameter 2500 N/dm 3500 N/dm Flame retardancy IEC , IEC Further characteristics Total system and Acc. to IEC and -25 insulation integrity EN 50200: 2000 Class PH120 & BS 8434: 2003 Part 2 (120 minutes) No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C x LKD 8UB7 00C LKD 8UA2 00C LKD 8UA5 00C LKD 8UA7 00C LKD 8UC7 00C9 0000

36 GigaLine 36 FO data cables GigaLine Outdoor cable, central 1750 N Advantages economical solution for outdoor installation longitudinally watertight more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-A-DQ(ZN)B2Y 1xn G/E ➊ ➋ ➌ Application Outdoor cable for direct installation in the ground, in conduits and where there is a risk of rodent damage in MAN (city networks) and LAN (campus/backbone). Suitable for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Easy to install thanks to greasefree, dry cable core. Suitable for splicing. Installation indoors, in conduits, on covered cable trays, in cable ducts or directly in the ground. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 1500 N/dm short-term 2500 N/dm Fire performance Halogen free IEC Construction ➊ Central filled loose tube with up to 24 fibers Fiber colour code acc. to IEC 60304, Loose tube colour: Yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Strain relief Non-metallic (glass rovings) ➌ Cable sheath PE, UV-resistant Sheath colour Black Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A x LKD 8AB7 00A LKD 8AA2 00A LKD 8AA5 00A LKD 8AA7 00A LKD 8AC7 00A9 0000

37 Office DataCenter Industry 37 GigaLine FO data cables GigaLine Outdoor cable, stranded 4000 N Advantages economical solution for outdoor installation longitudinally watertight more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-A-DQ(ZN)B2Y nxm G/E Application Outdoor cable for direct installation in the ground, in conduits and where there is a risk of rodent damage in MAN (city networks) and LAN (campus/backbone). Suitable for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Easy to install thanks to greasefree, dry cable core. Suitable for splicing. Installation indoors, in conduits, on covered cable trays, in cable ducts or directly in the ground. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. ➊ ➋ ➌ ➍ ➎ Thermal characteristics Transport/storage Installation Operating temp. Mechanical characteristics Min. bending radius static 40 C up to +70 C 10 C up to +50 C 40 C up to +60 C dynamic Max. crush strength long-term Fire performance short-term Halogen free IEC x outer diameter 20 x outer diameter 3000 N/dm 4000 N/dm Construction ➊ Stranded filled loose tube diameter 2.4 mm with up to 12 fibers and blind elements, if applicable Fiber colour code acc. to IEC Loose tube colour: Counting wire red, counting direction wire white, yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ central strength member ➌ Swellable nonwoven ➍ Strain relief Non-metallic (glass rovings) ➎ Cable sheath PE, UV-resistant Sheath colour Black Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9...10/125 2x LKD 8AB7 0K LKD 8AA2 0K LKD 8AA5 0K LKD 8AA7 0K LKD 8AC7 0K x LKD 8AB7 0K LKD 8AA2 0K LKD 8AA5 0K LKD 8AA7 0K LKD 8AC7 0K x LKD 8AB7 0K LKD 8AA2 0K LKD 8AA5 0K LKD 8AA7 0K LKD 8AC7 0K x LKD 8AB7 0K LKD 8AA2 0K LKD 8AA5 0K LKD 8AA7 0K LKD 8AC7 0K Further types on request

38 GigaLine 38 FO data cables GigaLine Outdoor cable, central 1750 N Advantages optimal rodent armouring longitudinally and transversally waterproof more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-A-DQ(ZN)2Y(SR)2Y 1xn G/E ➊ ➋ ➌ ➍ ➎ Application Outdoor cable for direct installation in the ground, in conduits and where there is an increased risk of rodent damage in MAN (city networks) and LAN (campus/backbone). Suitable for structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Easy to install thanks to grease-free, dry cable core. Suitable for splicing. Installation outdoors in conduits, on covered cable trays. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Central filled loose tube with up to 24 fibers Fiber colour code acc. to IEC ➋ Strain relief Non-metallic (glass rovings) ➌ Inner sheath PE ➍ Armouring Corrugated steel cladding as highly effective rodent protection ➎ Outer sheath PE, UV-resistant Sheath colour Black Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 2500 N/dm short-term 3500 N/dm Fire performance Halogen free IEC Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 1x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L x LKD 8AB7 00L LKD 8AA2 00L LKD 8AA5 00L LKD 8AA7 00L LKD 8AC7 00L9 0000

39 Office DataCenter Industry 39 GigaLine FO data cables GigaLine Outdoor cable, stranded 4000 N Advantages optimal rodent armouring longitudinally and transversally waterproof more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-A-DQ(ZN)2Y(SR)2Y nxm G/E ➊ ➋ ➌ ➍ ➎ ➏ ➐ Application Outdoor cable for direct installation in the ground, in conduits and where there is an increased risk of rodent damage in MAN (city networks) and LAN (campus/backbone). Suitable for use in structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Easy to install thanks to grease-free, dry cable core. Suitable for splicing. Installation outdoors, in conduits, on covered cable trays or directly in the ground. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Stranded filled loose tube diam. 2.4 mm with up to 12 fibers Fiber colour code acc. to IEC Loose tube colour: Counting wire red, counting direction wire white, yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Central strength member ➌ Swellable nonwoven ➍ Strain relief Non-metallic (glass rovings) ➎ Inner sheath PE, colour Black ➏ Armouring Corrugated steel cladding as highly effective rodent protection ➐ Outer sheath PE, UV-resistant Sheath colour Black Thermal characteristics Transport/storage Installation Operating temp. 40 C up to +70 C 10 C up to +50 C 40 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer-ø max. crush strength Brandverhalten dynamic 20 x outer-ø long-term 3000 N/dm short-term 5000 N/dm Halogen free IEC Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 2x LKD 8AB7 0A LKD 8AA2 0A LKD 8AA5 0A LKD 8AA7 0A LKD 8AC7 0A x LKD 8AB7 0A LKD 8AA2 0A LKD 8AA5 0A LKD 8AA7 0A LKD 8AC7 0A x LKD 8AB7 0A LKD 8AA2 0A LKD 8AA5 0A LKD 8AA7 0A LKD 8AC7 0A x LKD 8AB7 0A LKD 8AA2 0A LKD 8AA5 0A LKD 8AA7 0A LKD 8AC7 0A Further types on request

40 GigaLine 40 FO data cables GigaLine Outdoor cable, stranded with sheath, 4000 N Advantages optimally longitudinally and transversally waterproof more than twice the bandwidth with OM2e fibers for applications up to 40/100G Type KL-A-DF(ZN)(L)2Y nxm G/E ➊ ➋ ➌➍➎ Application Water-blocking gel-filled longitudinally and transversely watertight outdoor cable for installation directly in the ground, in conduits and where there is a risk of rodent damage in MAN (city networks) and LAN (campus/backbone). Suitable for use in structured cabling acc. to ISO/IEC and EN (2nd edition). In keeping with the fiber type ideal for all applications from Classes OF 300 to OF Suitable for splicing. Installation indoors and outdoors in conduits, on covered cable trays or directly in the ground. Mechanical pulling in with winches is only permitted in conjunction with force measuring devices with a logging feature. Construction ➊ Stranded filled loose tube diameter 2.4 mm with up to 12 fibers and blind elements, if applicable Fiber colour code acc. to IEC Loose tube colour: Counting wire red, counting direction wire white, yellow (E9/125), green (G50/125), blue (G62.5/125) ➋ Central strength member ➌ Filling Water-blocking gel filling in twist cavities of the cable core ➍ Strain relief Non-metallic (glass rovings) ➎ Outer sheath Aluminium sheath, resistant to UV rays (aluminium tape with PE sheath) Sheath colour Black Thermal characteristics Transport/storage 40 C up to +70 C Installation 5 C up to +50 C Operating temp. 40 C up to +60 C Mechanical characteristics Min. bending radius static 15 x outer diameter dynamic 20 x outer diameter Max. crush strength long-term 1500 N/dm short-term 3000 N/dm Fire performance Halogen free IEC Further characteristics Longitudinal watertightness IEC F5 Impact resistance IEC E4 Cable bending IEC E11 No. of fibers Outer diam. approx. Weight approx. Further types on request Max. strain relief Fire load approx. mm kg/km N MJ/m kwh/m OM1e G62.5/125 OM2e G50/125 Order no. OM3 bendable G50/125 OM4 bendable G50/125 OS2 E9 10/125 2x LKD 8AB LKD 8AA LKD 8AA LKD 8AA7 0A LKD 8AC x LKD 8AB LKD 8AA LKD 8AA LKD 8AA7 0A LKD 8AC x LKD 8AB LKD 8AA LKD 8AA LKD 8AA7 0A LKD 8AC x LKD 8AB LKD 8AA LKD 8AA LKD 8AA7 0A LKD 8AC

41 Office DataCenter Industry FO data cables 41 GigaLine

42 GigaLine 42 FO connectivity GigaLine FO connectivity

43 Office DataCenter Industry FO connectivity 43 GigaLine GigaLine FO connectivity page GigaLine FO cabling systems 44 GigaLine Trunk and splice boxes 47 o dc Fiber optic trunk box o dc Fiber optic splice box telescopic trunk box fixed trunk box telescopic splice box fixed splice box GigaLine Compact fiber optic distribution system 55 o dc Compact fiber optic rack 56 o dc Compact fiber optic module for pre-assembled breakout cables 57 o dc Compact fiber optic module for splicing solutions 58 GigaLine Office and floor distributors 61 o Fiber optic office and floor distributors size A for up to 4 splice cassettesx size B for up to 24 splice cassettes GigaLine Fiber-To-The-Desk (FTTD) wall outlets 65 o FTTD wall outlets for surface mounting for flush mounting 66 o FTTD wall outlets cable reservoir splice tray for cable reservoir 67 o FTTD outlet for cable ducts 68 o FTTD mounting bracket for cable ducts o Office dc DataCenter i Industry

44 GigaLine 44 FO connectivity GigaLine FO cabling systems High-performance components for building a iber optic infrastructure GigaLine is a perfectly coordinated system made up of components optimised for performance and quality. The GigaLine system is determined by the application, required link length and transmission protocol. The interplay of high-quality fibers which far exceed the standard and connectors with high-quality workmanship enable maximum performance and range for the respective application (GbE/10 GbE). The requirements for fibers and connectors differ depending on the field of application. The table below shows the protocol-dependent attenuation budget according to EN for the 10 Gigabit Ethernet protocol. From this is derived the number of possible connections based on the overall link. The following harmonised components were taken into consideration when putting together the system: Industry Office DataCenter Campus OM1e OM2 OM2e OM3 OM4 OS2 SC, ST LC, SC LC, MTP / MPO LC, SC Fiber optic cables (GigaLine ) with laser/dispersion-optimised multimode fibers that far exceed the standard and have appropriate performance reserves (for fiber specifications see section on GigaLine fiber optic data cables) The system components are optimised to meet the requirements for both distance and data rate. That is why LEONI consistently uses its own j-fiber fibers (cables, pigtails, patch cords). Fiber optic connectors with low insertion losses and high return losses GigaLine has components for every field of application. Industry Office DataCenter Campus GigaLine wall outlets GigaLine wall distributors GigaLine trunk and splice boxes GigaLine DClink GigaLine Compact Maximum transmission lengths for 10 Gigabit Ethernet system solutions. OM2e OM3 bendable OM4 bendable OS2 Max. link length* Attenuation budget** 1.8 db 2.6 db 2.6 db 6.2 db Max. fiber attenuation 0.37 db 0.75 db 1.37 db 3.6 db Number of possible connectors Recommended connectors LC, MTP/ MPO, SC LC, MTP/ MPO, SC * Based on 10 GbE ** All specifications are based on 850 nm or 1,310 nm LC, MTP / MPO, SC LC, SC

45 Office DataCenter Industry FO connectivity 45 GigaLine Graph 1 shows the system reserves afforded by the high-quality fibers and connectors in relation to EN Decisive advantages of these system reserves are: Longer transmission lengths for certain applications (100 Mbit/s, 1 GbE, 10 GbE, 40 GbE, 100 GbE) The option to insert more patch cords or splices Additional attenuation caused by aging processes can be curtailed Network extensions can be realised with ease and a certain level of assurance within the link lengths Quality is our benchmark Assembly of fiber optic connectors involves both adjustment of the fibers in the ferrule as well as time-consuming grinding and polishing. The aim here is to machine the connector so precisely by means of optimised processes that the insertion loss and reflections are kept to a minimum. This is done by means of PC polishing (PC = physical contact). Spherical polishing of the ferrule spring mounted in the connector housing produces a fiber/fiber transition at the end faces. In other words when two connectors are plugged into one coupling, the spring pressure pushes out all the air between the mating fibers of both connectors. The glass/glass transition then has very low reflections and low attenuation. Distance/km Attenuation-limited operation LEONI OM4 bendable LEONI OM3 bendable LEONI OM2e Standard OM3 Standard OM2 To maximise the performance of a PC connector, the surface parameters of the connectors must be carefully checked during the polishing process. The interferometer is an indicatory measuring instrument for this. The overlaps of coherent light waves are used to measure the quality of optical surfaces (fer- Dispersion-limited operation rule surfaces). The most important parameters are: Apex offset Bandwidth/MHz Graph 1: System reserves of GigaLine 150, 300 and 550 relative to the standard (offset between the highest point and the centre of the fiber) Radius of the connector interface (fiber/ferrule) Fiber height (undercut, protrusion) GigaLine BIMMF as well as patch and trunk cable the perfect combination GigaLine fiber optics are equipped with bend insensitive OM3 and OM4 fibers (j-bendable). That means significant added value for you: Greater reliability with higher packing density and installation in constricted areas due to the low bending loss. Low-risk patching in operation - the data transmission remains constantly stable despite significant bending. The doubled tensile strength of the fibers minimises the risk These parameters are decisive for the long-term behaviour and therefore the quality of a fiber optic connector. Insertion loss of the connectors used in GigaLine system components. Fiber type Insertion loss typ. Return loss G62.5/125 OM1e 0.2 db > 35 db G50/125 OM2e 0.2 db > 35 db G50/125 OM3 bendable 0.2 db > 35 db G50/125 OM4 bendable 0.2 db > 35 db E9..10/125 OS2 0.2 db > 50 db E9..10/125 OS2 APC 0.2 db > 65 db of a fiber tear in the patch field (200 kpsi in comparison to the standard with 100 kpsi). Maximum security for a mix and match with fibers of other manufacturers due to the minimum transition damping.

46 GigaLine 46 FO connectivity

47 Office DataCenter Industry FO connectivity 47 GigaLine GigaLine Trunk and splice boxes Multifunctional housing technology, 19" GigaLine trunk and splice boxes can be used in all areas of building data cabling. The construction of the components ensures speed and reliability during initial installation, maintenance and extension. All boxes are pre-assembled ready to install and constructed so that two cables can be inserted via cable glands or two divider heads can be inserted from above. A breakout panel to which the cables can be secured using cable ties is available as an alternative. Your guarantee for quick and reliable installation: The box body is made from aluminium and therefore very light The boxes are assembled ready to install The permissible bending radii as well as ease of installation are guaranteed even with high packing densities The telescopic version offers the advantage that all components are easily accessible for testing and maintenance work GigaLine trunk and splice box: Boxes with one rack unit as fixed installation or telescopic version Boxes with two rack units are always telescopic The front panel is made from galvanised steel panel and Light grey RAL 7035, powder coated One rack unit can be equipped with up to 24 x SC Duplex, 24 x LC Duplex, 24 x MT-RJ, 24 x E 2000, 24 x ST, 24 x FC couplings

48 GigaLine 48 FO connectivity GigaLine Fiber optic trunk box Box 19" / 1 RU, telescopic or ixed Advantages light as a feather easy to install GigaLine Trunk box telescopic Description Telescopic fiber optic patch panel for pre-assembled trunk cables. Suitable for terminating up to 48 optical fibers. Construction Box Aluminium, with dust protective cover telescopic and removable drawer, depth continuously adjustable by up to 50 mm Front panel and Galvanised steel panel, powder coated mounting bracket Colour: Grey RAL 7035 Capacity Installation of up to 2 trunk cables Labelling Channel 1 12 / 1 24 (screen printing) A/B coding with SC/ST/FC configuration Dimensions 19" / 1 RU 44 mm x 483 mm x 220 mm (HxWxD) Weight approx. 1.7 kg Configuration Equipment available with up to 24 slots Couplings SC Duplex, FC-PC/FC-APC, ST E2000/E2000 HRL, MTRJ, LC Duplex Accessories (optional) Breakout panel for securing cables using cable ties Designation Order no. GigaLine Telescopic trunk box see table Breakout panel LKD 9D Singlemode Number of fibers SC Duplex Met/Cer SC Duplex, blue Plastic/Cer LCD, blue Plastic/Cer E2000, blue Plastic/Cer E2000HRL, green Plastic/Cer 6 LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A Multimode Number of fibers SC Duplex, beige Plastic/PhBz LC Duplex, beige Plastic/PhBz LC Duplex, aqua Plastic/Cer LC Duplex, heather violet Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A LKD 9D32 A Other conigurations available on request

49 Office DataCenter Industry FO connectivity 49 GigaLine Advantages light as a feather easy to install GigaLine Trunk box ixed Description Fiber optic patch box for pre-assembled trunk cables. Suitable for terminating up to 48 optical fibers. Construction Box Aluminium, with dust protective cover Front panel Galvanised steel panel, powder coated Colour: Grey RAL 7035 Capacity Installation of up to 2 trunk cables Labelling Channel 1 12 / 1 24 (screen printing) A/B coding with SC/ST/FC configuration Dimensions 19" / 1 RU 44 mm x 483 mm x 220 mm (HxWxD) Weight approx. 1.4 kg Configuration Equipment available with up to 24 slots Couplings SC Duplex, FC-PC/FC-APC, ST E2000/E2000 HRL, MTRJ, LC Duplex Accessories (optional) Breakout panel for securing cables using cable ties Designation Order no. GigaLine Smart trunk, ixed see table Breakout panel LKD 9D Singlemode Number of fibers SC Duplex Met/Cer SC Duplex, blue Plastic/Cer LCD, blue Plastic/Cer E2000, blue Plastic/Cer E2000HRL, green Plastic/Cer 6 LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 AXXX 0000 LKD 9D42 A Multimode Number of fibers SC Duplex, beige Plastic/PhBz LC Duplex, beige Plastic/PhBz LC Duplex, aqua Plastic/Cer LC Duplex, heather violet Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A LKD 9D42 A Other conigurations available on request

50 GigaLine 50 FO connectivity GigaLine Fiber optic splice box Box 19" / 1 RU, telescopic Advantages light as a feather easy to install best optical properties GigaLine Splice box telescopic Description Telescopic fiber optic patch panel for up to 48 optical fibers. For terminating fiber optic transmission links with pigtails. Construction Box Aluminium, with dust protective cover telescopic and removable drawer, depth continuously adjustable by up to 50 mm Front panel and Galvanised steel panel, powder coated, Mounting bracket Colour: Grey RAL 7035 Pigtails Pigtails ready for splicing and plugged in (colours acc. to DIN IEC 60304) Labelling Channel 1 12 / 1 24 (screen printing) A/B coding with SC/ST/FC configuration Dimensions 19" / 1 RU 44 mm x 483 mm x 220 mm (HxWxD) Weight approx. 1.8 kg Optical characteristics Insertion loss typ. for all fiber types 0.2 db Return loss typ. G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Configuration Equipment Couplings available with up to 24 slots SC Duplex, FC-PC/FC-APC, ST, E2000/E2000 HRL, MTRJ, LC Duplex Accessories 1 x M20 cable gland Splice cassette Crimp splice protective holder Accessories (optional) Breakout panel for securing cables using cable ties Designation GigaLine Telescopic splice box Order no. see table Breakout panel LKD 9D

51 Office DataCenter Industry FO connectivity 51 GigaLine Singlemode OS2 E9..10/125 Number of fibers SC Duplex Met/Cer SC Duplex, blue Plastic/Cer LCD, blue Plastic/Cer E2000, blue Plastic/Cer E2000HRL, green Plastic/Cer 6 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A Multimode OM1e G62.5/125 Number of fibers SC Duplex, beige Plastic/PhBz LCD, beige Plastic/PhBz 6 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A Multimode OM2e G50/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, beige Plastic/PhBz E2000, beige Plastic/Cer 6 LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A Multimode OM3 G50/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, aqua Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31A Multimode OM4 G50/125 Number of fibers SC Duplex, beige Met /Ker SC Duplex, beige Plastic/PhBz LCD, heather violet Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 AXXX 0000 LKD 9D31 A LKD 9D31 A LKD 9D31 A LKD 9D31 AXXX 0000 Other conigurations available on request

52 GigaLine 52 FO connectivity GigaLine Fiber optic splice box Box 19" / 1 RU, ixed Advantages light as a feather easy to install best optical properties GigaLine Splice box ixed Description Fiber optic patch panel, for up to 48 optical fibers. For terminating fiber optic transmission links with pigtails. Optical characteristics Insertion loss typ. for all fiber types 0.2 db Construction Return loss typ. G62.5/125 OM1e > 35 db Box Front panel Pigtails Aluminium with dust protective cover Galvanised steel panel, Colour: Grey RAL 7035 Pigtails ready for splicing and plugged in (colours acc. to DIN IEC 60304) G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Labelling Channel 1 12 / 1 24 (screen printing) A/B coding with SC/ST/FC configuration Configuration Dimensions 19" / 1 RU Equipment available with up to 24 slots 44 mm x 483 mm x 220 mm (HxWxD) Couplings SC Duplex/SC Duplex, FC-PC, FC-PC(HRL) Weight approx. 1.5 kg (SM), ST/ST, E2000/E2000, E2000HRL/ E2000HRL (SM), MT-RJ/MT-RJ (MM), LC Duplex Accessories 1 x M20 cable gland Splice cassette Crimp splice protective holder Accessories (optional) Breakout panel for securing cables using cable ties Designation GigaLine Splice box, ixed Order no. see table Breakout panel LKD 9D

53 Office DataCenter Industry FO connectivity 53 GigaLine Singlemode OS2 E9..10/125 Number of fibers SC Duplex, blue Met/Cer SC Duplex, blue Plastic/PhBz E2000, blue Plastic/Cer E2000HRL, green Plastic/Cer 6 LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 Multimode OM1e G62.5/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, beige Plastic/PhBz E2000, beige Plastic/Cer 6 LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000 Multimode OM2e G50/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, beige Plastic/PhBz E2000, beige Plastic/Cer 6 LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A Multimode OM3 G50/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, aqua Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000 LKD 9D41 A Multimode OM4 G50/125 Number of fibers SC Duplex, beige Met/Cer SC Duplex, beige Plastic/PhBz LCD, heather violet Plastic/Cer E2000, beige Plastic/Cer 6 LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 A LKD 9D41 A LKD 9D41 A LKD 9D41 AXXX 0000 LKD 9D41 AXXX 0000 LKD 9D41 A Other conigurations available on request

54 GigaLine 54 FO connectivity

55 Office DataCenter Industry FO connectivity 55 GigaLine GigaLine Compact iber optic distribution system for maximum packing density and lexibility GigaLine Compact is a user-friendly fiber optic distribution system that can be configured with up to 144 fibers with conventional couplings such as SC, ST, E 2000 and with 288 fibers with LC Duplex couplings. The system combines compactness with optimum fiber optic management. GigaLine Compact is ideal for applications where space is tight and maximum flexibility is required. GigaLine Compact rack with excess-length drawer 3+1 RU Width: 19"/84 HP Height 4 RU (3 RU rack + 1 RU excess-length drawer) Can be configured with up to 12 modules Excess-length drawer can be pulled out towards the rear, for holding loose tube reserves and securing the fiber optic cables, alternatively up to 6 pre-assembled trunk cables with up to 48 fibers can be secured using cable glands Management panel for patch cord routing and adherence to the bending radii GigaLine rack with excess-length drawer 3+1 RU GigaLine Compact module 3 RU/7 HP For up to 24 fibers Available with up to 12 couplings Configured with SC Duplex, ST, E2000, FC-PC, MT-RJ or LC Duplex couplings Front panel: Aluminium, with mounting screws Including splicing cassette and excess-length cassette Buffered fiber pigtails are inserted, stripped and coloured (primary and secondary coating) acc. to the DIN IEC colour code ready for splicing for fast and secure installation Fiber qualities: OM1e, OM2e, OM3, OM4 and OS2 The couplings can be retrofitted at any time GigaLine Compact module 3 RU, 7 HP

56 GigaLine 56 FO connectivity GigaLine Compact iber optic rack with mounted excess-length drawer 3+1 RU Advantages for high packing densities clearly laid out cable management Loose tube guide plate GigaLine Compact rack Description Rack with 84 HP. The excess-length drawer for the loose tubes can be pulled out to the rear. Max. 6 trunk cables with 48 fibers each can be inserted from above or up to 12 loose tube cables with max. 288 fibers can be inserted from the front. Construction Box Aluminium with permanently installed runners for the built-in modules Excess-length For clear organisation of the drawer loose tube reserves and securing, can be pulled out to the rear 19" / 4 RU Dimensions 176 mm x 483 mm x 295 mm (HxWxD) Accessories (optional) Loose tube guide To protect the loose tubes on the rear, plate especially in open racks Dummy front panel To close off unused 7HP module slots Accessories 1 x M20 cable gland 5 x patch cord routing Rack rear view Designation Order no. GigaLine Compact rack LKD 9D Loose tube guide plate LKD 9D Dummy front panel 7 HP LKD 9D Rack for GigaLine trunk cables rear view

57 Office DataCenter Industry 57 GigaLine FO connectivity GigaLine Compact iber optic module Built-in module for pre-assembled breakout cables, 3 RU / 7 HP GigaLine Compact trunk module Description Built-in module, available with 3, 6 and 12 slots. Including excess-length cassette. Configuration Couplings SC Duplex, ST, E2000, FC-PC, MT-RJ, LC Duplex, LC-Quad Construction Module rack Front panel Capacity Dimensions Aluminium Aluminium, with mounting screws for up to 24 fibers 7 HP / 1 RU 128 mm x 35 mm x 240 mm (HxWxD) Accessories Labelling strips Cable ties Singlemode Number of fibers SC Duplex, blue Plastic/Cer LCD, blue Plastic/Cer E2000, blue Plastic/Cer 6 LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D (LC-Quad) Multimode Number of fibers SC Duplex, beige Plastic/PhBz LC Duplex, beige Plastic/PhBz LC Duplex, aqua Plastic/Cer LC Duplex, heather violet Plastic/Cer 6 LKD 9D LKD 9D LKD 9D52 0XXX 0000 LKD 9D52 0XXX LKD 9D LKD 9D LKD 9D52 0XXX 0000 LKD 9D52 0XXX LKD 9D (LC-Quad) LKD 9D (LC-Quad) LKD 9D (LC-Quad) Further connectors available on request

58 GigaLine 58 FO connectivity GigaLine Compact iber optic module Built-in module for splicing solutions Advantages best optical properties GigaLine Compact splice module Description Built-in module, available with 3, 6 and 12 slots. Including splice cassette and excess-length cassette. The buffered fiber pigtails are inserted, stripped and coloured (primary and secondary coating) acc. to the DIN IEC colour code ready for splicing for fast and secure installation. Construction Module rack Aluminium Front panel Aluminium, with mounting screws Pigtails Up to 24 pigtails ready for splicing and plugged in (colours acc. to DIN IEC 60304) 7 HP / 1 RU Dimensions 128 mm x 35 mm x 240 mm (HxWxD) Optical characteristics Insertion loss typ. for all fiber types 0.2 db Return loss typ. G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Configuration Couplings The couplings can be retrofitted at any time Accessories Labelling strips Cable ties for securing the loose tubes Crimp splice protective holder Protective tube for loose tubes 90 cm

59 Office DataCenter Industry FO connectivity 59 GigaLine Singlemode OS2 E9.. 10/125 Number of fibers SC Duplex, blue Met/Cer LC Duplex, blue Plastic/Cer E2000, blue Plastic/Cer 6 LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D (LC-Quad) Multimode OM1e G62.5/125 Number of fibers SC Duplex Plastic/PhBz LC Duplex Plastic/PhBz 6 LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D (LC-Quad) Multimode OM2e G50/125 Number of fibers SC Duplex Plastic/PhBz LC Duplex Plastic/PhBz 6 LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D (LC-Quad) Multimode OM3 G50/125 Number of fibers SC Duplex Plastic/PhBz LC Duplex, aqua Plastic/Cer 6 LKD 9D LKD 9D LKD 9D LKD 9D LKD 9D (LC-Quad) Multimode OM3e G50/125 Number of fibers SC Duplex Plastic/PhBz LC Duplex, heather violet Plastic/Cer 6 LKD 9D LKD 9D51 00XX LKD 9D LKD 9D51 XXXX LKD 9D (LC-Quad) Further conigurations on request

60 GigaLine 60 FO connectivity

61 Office DataCenter Industry FO connectivity 61 GigaLine GigaLine Oice and loor distributors Multifunctional housing for FTTD/FTTO cabling Network installations are increasingly being implemented with disturbance-proof fiber optic systems technology with future capabilities. This allows EMC problems as well as different earthing potentials to be avoided for cabling reaching through whole buildings. When a fiber optic cabling system with a star structure is used in a building, the long ranges involved make it possible to dispense with active components on the individual floors. 19" distributor cabinets and separate security areas (rooms) as well as the associated power supply are no longer necessary. The space-saving office and floor distributors are perfectly suited for the transitions from high-fiber backbone cables to breakout cables for workplace cabling. They are easy to install and offer space-saving organisation and optimum protection for fiber optic systems engineering. GigaLine stands for a high degree of flexibility: The GigaLine office and floor distributors can be optionally equipped with splice cassettes and/or distributor plates for holding fiber optical couplings Later modifications to the components used are possible at any time Holds up to 288 fibers The buffered fiber pigtails are coloured acc. to the DIN IEC colour code for fast and reliable installation The pigtail buffered fibers in the splice cassette are stripped and ready for splicing The incoming and outgoing fiber optic cables are fixed to a strain relief strip in the housing The cable entries are sealed via brush strips or PG cable glands Housings have one removable/lockable swing door Housing colour: Light grey RAL 7035 GigaLine office and floor distributor Are tailored to the customer's requirements and supplied fully assembled Are available in 2 sizes Office 1 Office 2 Office 3 Office 4 Office 5 Office 6 Office 7 Basement

62 GigaLine 62 FO connectivity GigaLine Fiber optic oice and loor distributors Wall distributor for up to 4 or 24 splice cassettes Advantages space-saving universal use GigaLine Wall distributor size A Application Space-saving distributor cabinets for Fiber-To-The-Office or Fiber-To-The-Desk cabling systems. Suitable for distributing up to 24 channels (48 fibers). Features For up to 4 splice cassettes with a total of 48 fibers. The buffered fiber pigtails are inserted, stripped and coloured acc. to the DIN IEC colour code (primary and secondary coating) ready for splicing for fast and reliable installation. Construction Powder-coated steel panel, colour Light grey RAL 7035 Cable entry from above and below possible 4 cable entries either as M20/M25 or strip brush Door with lock or bolt Weight approx. 4 kg Dimensions Size A 300 mm x 300 mm x 85 mm (H x W x D) Configuration Optionally only with couplings for pre-assembled trunks, as splice box or combined Accessories Up to 4 splice cassettes With crimp splice protective holder, buffered fiber strain relief and cover Up to 24 couplings: LCD, SCD or E2000 Designation GigaLine Wall distributor, size A with 4 splice cassettes and 24 strip brushes Order no. LKD 9D additional equipment on request

63 Office DataCenter Industry FO connectivity 63 GigaLine Advantages space-saving universal use GigaLine Wall distributor size B Application Space-saving distributor cabinets for Fiber-To-The-Office or Fiber-To-The-Desk cabling systems. Suitable for distributing up to 144 channels (288 fibers). Features For up to 24 splice cassettes for up to 288 fibers. The buffered fiber pigtails are inserted, stripped and coloured (primary and secondary coating) acc. to the DIN IEC colour code ready for splicing for fast and secure installation. Construction Dimensions Size B 600 mm x 425 mm x 220 mm (H x W x D) Configuration See distributor A Accessories Up to 24 splice cassettes with crimp splice protective holder, buffered fiber strain relief and cover or up to 96 ST or LCD couplings or up to 48 SCD couplings with the corresponding number of splice cassettes Powder-coated steel panel, colour Light grey RAL 7035 Cable entry from above and below possible 4 cable entries either as M20/M25 or strip brush Door with lock or bolt Weight approx. 7 kg Designation GigaLine Wall distributor, size B with 12 splice cassettes, 3 strip brushes and an insertion plate Order no. LKD 9D additional equipment on request

64 GigaLine 64 FO connectivity

65 Office DataCenter Industry FO connectivity 65 GigaLine GigaLine Fiber-To-The-Desk (FTTD) wall outlets Compact fiber optic connectivity high performance, immunity to disturbances, future capabilities Of course, the GigaLine system also includes comprehensive solutions for fiber-to-the-desk. Here it is possible to use a wide range of wall outlets with the corresponding installation materials for surface mounting and installation in ducts. As a result of a specific outlet design, bending never goes below the admissible bending radii of the fibers, thus ensuring that the fiber keeps its full functionality even in the long term: A defined bending radius for the fiber ensures the service life An effective strain relief for cables and pigtails and clean guidance within the outlet ensure minimum strain on the fiber and preservation of the physical characteristics The dimensions of the outlets are as small as possible GigaLine flush-mounted outlet The flush-mounted outlet can be installed in ducts or, as the name suggests, mounted flush. Special features: Can be equipped with up to two duplex or four simplex couplings Possible types of coupling: SC Duplex, ST Simplex, E 2000, LC Duplex The bending radius of the fiber of at least 30 mm is ensured by the cable reservoir and the cable guide The outlet has a downward inclination of 10. This ensures optimum protection against mechanical stress The universal carrying frame is compatible with usual mounting cups All current connecting techniques are supported: Assembly of fiber optic plugs on site Use of pre-assembled cables Splicing of buffered fiber pigtails GigaLine flush-mounted outlet Lebensdauer (Jahre) ,01 25 Jahre 5 loops 4 loops 3 loops 2 loops 0, loop Biegeradius (mm)

66 GigaLine 66 FO connectivity GigaLine FTTD wall outlets for surface / lush mounting GigaLine Wall outlet for surface mounting Features Wall outlet for surface mounting. Downward outlet direction Splice tray for four splices For 2 SC Duplex or LC Quad couplings Cover with screw as access protection Cable entry for 3 10 mm cables Adherence to the bending radii of approx. 30 mm thanks to guided fiber paths Optical characteristics Insertion loss typ. Return loss typ. Dimensions 120 mm x 80 mm x 25 mm (HxWxD) Accessories G50/125 OM3/4 0.2 db E9..10/125 OS2 0.2 db G50/125 OM3/4 > 35 db E9..10/125 OS2 > 50 db (PC) Cable ties, coupling protection, wall mounting set > 65 db (APC) GigaLine Wall outlet for lush mounting Features Wall outlet for mounting in ducts and for underfloor mounting. Downward outlet direction (at an angle of 10 ) Termination of up to 4 fibers Bending radius > 30 mm in combination with cable reservoir KR or cable guide KF Colour: Oyster white RAL 1013 Optical characteristics Insertion loss typ. Return loss typ. Dimensions 114 mm x 85 mm x 41 mm (HxWxD) Scope of delivery G50/125 OM3/4 0.2 db E9..10/125 OS2 0.2 db Equipped with 2 fiber optic couplings With labelling insert (enclosed) G50/125 OM3/4 > 35 db E9..10/125 OS2 > 50 db (PC) > 65 db (APC) Designation GigaLine wall outlet for surface mounting (1 piece) GigaLine wall outlet for surface mounting (1 piece) Configuration Order no. OS2 E9..10/125 OM3 G50/125 SC Duplex Plastic/Cer LKD 9D SC Duplex Plastic/PhBz LKD 9D LC Quad Plastic/Cer LKD 9D LC Quad Plastic/PhBz LKD 9D without pigtails SC Duplex Plastic/Cer LKD 9D SC Duplex Plastic/PhBz LKD 9D LC Quad Plastic/Cer LKD 9D LC Quad Plastic/PhBz LKD 9D Designation Configuration Order no. GigaLine wall outlet for lush mounting (1 piece) 2 LC Duplex Plastic/PhBz LKD 9FK SC Duplex Plastic/PhBz LKD 9FK SC Duplex Met/Cer LKD 9FK ST Simplex Met /PhBz LKD 9FK

67 Office DataCenter Industry FO connectivity 67 GigaLine GigaLine FTTD wall outlets Cable reservoir / splice tray GigaLine Cable reservoir KR Features For flush-mounted outlet to hold excess cable lengths in the duct and/or safety reserves (up to 4 x 1 m for an overall diameter of 3 mm). GigaLine Splice tray for cable reservoir KR Features For storing fiber optic splices when splicing plug pigtails. The separate storage of splice reserve and working reserve protects the sensitive splice area. Min. bending radius > 30 mm Direction-independent cable entry with cable tie strain relief on entry and exit side Can be equipped with one or two splice holders for 4 fusion splices or mechanical splice connectors Snaps into cable reservoir KR Dimensions 76 mm x 151 mm x 50 / 55 mm (HxWxD) 50 mm installation depth (KR50), 55 mm installation depth (KR55) Designation Order no. Designation Order no. GigaLine Cable reservoir KR50 (1 piece) LKD 9FK GigaLine Splice tray for cable reservoir KR (1 piece) LKD 9FK GigaLine Cable reservoir KR55 (1 piece) LKD 9FK

68 GigaLine 68 FO connectivity GigaLine FTTD outlet for cable ducts for installation in ducts GigaLine Outlet EK for cable ducts Features Extremely compact outlet for horizontal or vertical installation in ducts. Termination of 1 duct/2 fibers. Outlet direction: Downwards at an angle of 45, defined bending radius in conjunction with suitable mounting bracket MH Strain relief using cable ties Central plate 50 mm x 50 mm General characteristics Can be equipped with 1 duplex coupling or 2 simplex couplings Possible types of coupling: SC Duplex, E 2000, LC Quad The integrated cable guide guarantees adherence to the minimum bending radius The universal central plate can be combined with various switch ranges Both cables with pre-assembled plugs and plugs assembled on site can be used Designation Configuration Order no. GigaLine Outlet EK for cable ducts (1 piece) 1 LC Quad Plastic/PhBz LKD 9FK SC Duplex Plastic/PhBzr LKD 9FK

69 Office DataCenter Industry FO connectivity 69 GigaLine GigaLine FTTD mounting bracket for installation in ducts for outlet EK for cable ducts Mounting bracket MH for vertical installation Mounting bracket MH for horizontal installation GigaLine Mounting bracket MH Features For space-saving installation of the outlet EK for cable ducts. The mounting bracket is easy to install and guarantees adherence to the required bending radii. Bracket for horizontal or vertical installation with 50 mm and 55 mm installation depths available Mounting options T-slot mounting Horizontal or vertical, fits ducts from Thealit, OBO/Bettermann, ASYCO and Alusor Design Height 50 mm (MH50) Height 55 mm (MH55) Designation Order no. GigaLine horizontal mounting bracket MH50 (1 piece) LKD 9FK GigaLine horizontal mounting bracket MH55 (1 piece) LKD 9ZK GigaLine vertical mounting bracket MH50 (1 piece) LKD 9FK GigaLine vertical mounting bracket MH55 (1 piece) LKD 9ZK

70 GigaLine 70 FO patch cords / trunk cables GigaLine FO patch cords / trunk cables

71 Office DataCenter Industry FO patch cords / trunk cables 71 GigaLine GigaLine FO patch cords / trunk cables page GigaLine FO patch cords 72 o dc Fiber optic patch cord, breakout 72 o dc Fiber optic patch cord, LC/PC-Uniboot 74 dc FO patch cords MTP MTP I-F(ZN)H 1x12 MTP I-F(ZN)HH 2x12 GigaLine Trunk pre-assembled trunk cables 77 o dc Fiber optic trunk cable, Mini-Breakout 78 o dc i Fiber optic trunk cable, breakout 80 i Fiber optic trunk cable, outdoor 82 o dc i Fiber optic trunk cable, universal o Office dc DataCenter i Industry

72 GigaLine 72 FO patch cords / trunk cables GigaLine Fiber optic patch cord, breakout Type KL-I-V(ZN)HH Advantages Breakout patch cord OS2 equipped with LC Duplex, SC Duplex, SC Simplex, E-2000 Simplex robust with dual cable sheath fiber type recognisable on the cladding best optical properties GigaLine Patch Figure 0 Construction Buffered fiber Strain relief Cable sheath Sheath colour Dimensions Two semi-tight buffered fibers with strain relief as breakout elements (diam. 2.1 mm) running parallel under one outer sheath Colour: Orange (multimode), yellow (singlemode) Aramid Halogen-free, flame-retardant compound OM1e, OM2, OM2e Orange OS2 Yellow OM3 Aqua OM4 Heather violet Outer cable diameter 3.1 x 5.2 mm Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Bending radius static 35 mm 20 mm (over flat side) dynamic 65 mm 35 mm single element 30 mm 15 mm Optical characteristics (typical) Insertion loss for all fiber types 0.2 db Return loss G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 10 C up to +70 C Fire performance Flame retardancy Halogen free Smoke density IEC / IEC , Cat. A IEC IEC Outer sheath Strain relief Tight bufered iber Subcable sheath

73 Office DataCenter Industry Office DataCenter 73 GigaLine FO patch cords / trunk cables Length m OM1e G62.5/125 µm OM2e G50/125 µm OM3 G50/125 µm OM4 G50/125 OS2 E9..10/125 Configuration ST-ST (IEC ) 1.0 LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A Configuration SC Duplex SC Duplex (IEC ) 1.0 LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A Configuration LC Duplex LC Duplex (IEC ) 1.0 LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A

74 GigaLine 74 FO patch cords / trunk cables GigaLine Fiber optic patch cord, LC/PC-Uniboot Type KL-I-V(ZN)H Uniboot patch cord OM4 equipped with 2 x LC DuplexUniboot Advantages lowest space requirements very flexible no preferred Uniboot patch cord OS2 equipped with 2 x LC DuplexUniboot GigaLine Patch LCD-Uniboot GigaLine Patch LCD-Uniboot GigaLine Patch LCD-Uniboot OS2 OM3 OM4 Uniboot patch cord OM3 equipped with 2 x LC DuplexUniboot bending direction fiber type recognisable on the cladding best optical properties Construction Cable type Buffered fiber KL-I-V(ZN)H Two semi-tight buffered fibers under a common sheath (round diam. 2.8 mm) Strain relief Cable sheath Sheath colour Aramid Halogen-free, flame-retardant compound OM1e, OM2, OM2e Orange OS2 Yellow OM3 Aqua OM4 Heather violet Cable diameter 2.8 mm Thermal characteristics Transport/storage Installation Operating temp. 25 C up to +70 C 5 C up to +50 C 10 C up to +70 C Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Bending radius static 30 mm 15 mm dynamic 60 mm 30 mm Tensile strength 300 N Optical characteristics Insertion loss Return loss Laser bandwidth Fire performance Flame retardancy Halogen free Smoke density Configuration LC Duplex Uniboot < 0.4 db 0.2 db (typical) Patch cord OS2 Patch cord OM3/OM4 Patch cord OM3 Patch cord OM4 > 50 db (PC) > 65 db (APC) > 35 db 1,500 MHz x km 4,700 MHz x km IEC / IEC , Cat. A IEC IEC Kabellänge See table, other plug types and lengths on request Length m GigaLine Patch LCD-Uniboot OS2 E9..10/125 GigaLine Patch LCD-Uniboot OM3 G50/125 GigaLine Patch LCD-Uniboot OM4 G50/125 Configuration 2 x LC Duplex Uniboot Configuration 2 x LC Duplex Uniboot Configuration 2 x LC Duplex Uniboot 1.0 LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A LKD 9A

75 Office DataCenter Industry 75 GigaLine FO patch cords / trunk cables GigaLine FO patch cords MTP Type KL-I-F(ZN)H / KL-I-F(ZN)HH MTP / MPO patch cord Advantages GigaLine Patch MTP I-F(ZN)H 1x12 GigaLine Patch MTP I-F(ZN)HH 2x12 lowest space requirements very flexible no preferred bending direction fiber type recognisable on the cladding best optical properties Description Connection-ready MTP patch cord assembled at both ends with one or two MTP plugs (female) or one MTP (female) to six LC Duplex Uniboot plugs. Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 10 C up to +70 C Construction Cable type Strain relief Cable sheath Sheath colour Cable diameter KL-I-F(ZN)H 1x1 or KL-I-F(ZN)HH 2x12 Aramid Halogen-free, flame-retardant compound OM2 Yellow OM3 Aqua OM4 Heather violet 3.0 mm (bei 1x12) 8.9 mm (bei 2x12) Mechanical characteristics Bending radius OM1e/2e/OS2 OM3/4 bendable KL-I-F(ZN)H 1x12 static 30 mm 15 mm dynamic 60 mm 30 mm KL-I-F(ZN)HH 2x12 static 90 mm 45 mm dynamic 180 mm 30 mm Single element see KL-I-F(ZN)H 1x12 Tensile strength KL-I-F(ZN)H 1x12 KL-I-F(ZN)HH 2x N 600 N Field of application In DataCenters as a patch cord for applications acc. to ISO/IEC and EN (2nd edition) GigaLine Patch MTP 6LCDU (fanout) for multimode applications via two fibers (up to 10GBASE-SR) GigaLine Patch 1MTP 1MTP for multimode applications via 2 x 4 fibers (40GBASE-SR4) GigaLine Patch 2MTP 2MTP for multimode applications via 2 x 10 fibers (100GBASE-SR10) Optical characteristics (typical) Insertion loss Return loss Fire performance Flame retardancy Halogen free Smoke density 0.3 db (MTP) for all fiber types 0.2 db (LCDU) for all fiber types OM3/OM4 OM3/OM4 > 20 db (MTP) > 40 db (LCDU) IEC / IEC , Cat. A IEC IEC Designation Configuration side A Configuration side B Order no. GigaLine Patch 12 GigaLine Patch 2x12 Wiring (1:1) Order no. OM3 6 LCD MTP* 6x LC duplex Uniboot OM3 MTP female 12 OM3 LKD 9R72 1xxx 0000 OM4 6 LCD MTP* 6x LC duplex Uniboot OM4 MTP female 12 OM4 LKD 9R72 4xxx 0000 OM3 MTP MTP* MTP female 12 OM3 MTP female 12 OM3 LKD 9R73 6xxx 0000 LKD 9R73 5xxx 0000 OM4 MTP MTP* MTP female 12 OM4 MTP female 12 OM4 LKD 9R73 nxxx 0000 LKD 9R73 3xxx 0000 KBG00005 OM3 2xMTP 2xMTP* 2x MTP female 12 OM3 2x MTP female 12 OM3 LKD 9R73 xxxx 0000 LKD 9R7n nxxx 0000 OM4 2xMTP 2xMTP* 2x MTP female 12 OM4 2x MTP female 12 OM4 LKD 9R73 nxxx 0000 LKD 9R73 4xxx 0000 * crossed xxx = Length in m. 1 piece per packing unit. Wiring (X) KBG00003 KBG00004

76 GigaLine 76 FO patch cords / trunk cables

77 Office DataCenter Industry FO patch cords / trunk cables 77 GigaLine GigaLine Trunk pre-assembled trunk cables Safely through "thick and thin" Ready-to-connect units are at the heart of our fiber optic system technology. Our pre-assembled cables (GigaLine trunk cables) guarantee rapid, reliable and economical installation. Coordinated system components ensure the quality of the transmission line. Installations times are calculable. A lasting solution On-site installation frequently takes place under unfavourable conditions. Moisture, dirt and poorly accessible areas are nothing unusual. This is why we use an IP67 protection class wire ripple tube for our GigaLine trunk cables with universal or outdoor cable. Thanks to their particularly strong construction with an encapsulated cable divider and bolted-on wire ripple tube, our trunk cables are protected against water spray and noncrush. They are ideal for harsh construction site environments and outdoor cabling systems. Indoor cables are fitted with dust protection without strain relief to prevent soiling of the plugs. GigaLine trunk cables ensure that ambient conditions do not affect the quality of the transmission lines either during or after installation. The feeder aid is flexible and has a small cross section. This enables pre-assembled trunk cables to be easily fed into tight, twisty manholes and installation channels. A frictional connection is formed with the divider head. It acts on the strain relief elements and the sheaths. The fibers thereby remain free of tension. The divider head design guarantees the stability of the physical parameters and a long service life. Time is money GigaLine trunk cables stand for reliable and calculable installation. Installations times are short. All GigaLine 19" trunk cable housings have recesses on the back in which the divider head is mounted to prevent rotation. The fast assembly minimises any downtime e.g. as a result of an IT system's temporary shutdown. There is no need for splicing the cables or fitting the plugs on site, which would sometimes involve adverse conditions. This also does away with costly outlay on splicing equipment and specially trained staff. GigaLine trunk cables can also be used as a cable pre-assembled at one end. Fields of application GigaLine trunk cables are ideal for backbone cabling in the primary and secondary segments as well as for collapsed backbone cabling. Quality means maximum safety The plugs are assembled with high quality ceramic ferules under clean conditions. The plug faces are polished to the highest standard, thereby ensuring outstanding plug transitions in reproducible quality (input and return attenuation). A test certificate with the attenuation readings of each fiber is supplied with the product. There is also the option of having OTDR measurements.

78 GigaLine 78 FO patch cords / trunk cables GigaLine Fiber optic trunk cable, Mini-Breakout Type KL-I-V(ZN)H, pre-assembled at both ends Advantages easy assembly best optical properties GigaLine Trunk Mini-Breakout Construction Single elements Strain relief Cable sheath Patch element Dust protection Protection class Up to 12 semi-tight buffered fibers with diameter 0.9 mm Colour code acc. to EIA/TIA 598C Blue (1), orange (2), green (3), brown (4), grey (5), white (6), red (7), black (8), yellow (9), violet (10), pink (11), turquoise (12) Aramid threads Halogen-free, flame-retardant compound OM1e, OM2e Orange OS2 Yellow OM3 Aqua OM4 Heather violet diameter 0.9 mm, shortest patch element 55 cm, gradation 5 cm Protected with plastic tube acc. to IP44 Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 10 C up to +50 C Optical characteristics Insertion loss typ. for all fiber types 0.2 db Return loss typ. G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Bending radius static 10 5 x outer diameter dynamic x outer diameter Fire performance Flame retardancy Halogen free Smoke density IEC / IEC , Cat. A IEC IEC 61034

79 Office DataCenter Industry Office DataCenter 79 GigaLine FO patch cords / trunk cables Plug SC E2000 LC Singlemode OS2 E9..10/125 4 LKD 9Vxx x08b 0000 LKD 9Vxx x08l LKD 9Vxx x08c 0000 LKD 9Vxx x08m LKD 9Vxx x08n LKD 9Vxx x08e 0000 LKD 9Vxx x08o 0000 Multimode OM2e G50/125 4 LKD 9Vxx x LKD 9Vxx x09f LKD 9Vxx x LKD 9Vxx x09g LKD 9Vxx x LKD 9Vxx x Multimode OM3 G50/ Multimode OM1e G62.5/125 4 LKD 9Vxx x10o 0000 LKD 9Vxx x10y LKD 9Vxx x10p 0000 LKD 9Vxx x10z LKD 9Vxx x10r 0000 LKD 9Vxx x xxx = Length in metres, measured from plug side A to plug side B further plug types and fiber numbers on request

80 GigaLine 80 FO patch cords / trunk cables GigaLine Fiber optic trunk cable, breakout Type KL-I-V(ZN)HH, pre-assembled at both ends Advantages easy assembly best optical properties GigaLine Trunk Breakout Construction Single elements Up to 12 buffered fibers under one sheath, diameter 2.1 mm Strain relief Aramid threads Cable sheath Halogen-free, flame-retardant compound OM1e, OM2e Orange OS2 Yellow OM3 Aqua OM4 Heather violet Patch element Shortest patch element 55 cm, gradation 5 cm Dust protection Protected with plastic tube Protection class acc. to IP44 Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 10 C up to +50 C Optical characteristics Insertion loss typ. Return loss typ. for all fiber types 0.2 db G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db Mechanical characteristics OM1e/2e/OS2 OM3/4 bendable Min. bending radius static 10 5 x outer diameter dynamic x outer diameter Fire performance Flame retardancy Halogen free Smoke density IEC / IEC , Cat. A IEC IEC 61034

81 Office DataCenter Industry FO patch cords / trunk cables 81 GigaLine Plug SC E2000 LC Singlemode OS2 E9..10/125 4 LKD 9Vxx x11d 0000 LKD 9Vxx x11n LKD 9Vxx x11f 0000 LKD 9Vxx x11p LKD 9Vxx x11g 0000 LKD 9Vxx x11q 0000 Multimode OM2e G50/125 4 LKD 9Vxx x LKD 9Vxx x12a 0000 LKD 9Vxx x12k 0000 Multimode OM3 G50/ Multimode OM1e G62.5/125 4 LKD 9Vxx x14u 0000 LKD 9Vxx x LKD 9Vxx x15i LKD 9Vxx x14w 0000 LKD 9Vxx x LKD 9Vxx x15k LKD 9Vxx x14y 0000 LKD 9Vxx x15a 0000 LKD 9Vxx x15m 0000 xxx = Length in metres, measured from plug side A to plug side B further plug types and fiber numbers on request

82 GigaLine 82 FO patch cords / trunk cables GigaLine Fiber optic trunk cable, universal Type KL-U-DQ(ZN)BH, pre-assembled at both ends Advantages robust design easy assembly high crush resistance & tensile strength best optical properties GigaLine Trunk U-DQ(ZN)BH IP67 Construction Single elements Farbcode Strain relief Cable sheath Divider head Strain relief Patch element Strain relief Dust protection Protection class Up to 48 buffered fibers with strain relief under one sheath, diameter 1.8 mm Acc. to IEC Non-metallic (glass rovings) Halogen-free, flame-retardant compound Colour: black Aluminium 600 N Ø 1.8 mm, assorted colours acc. to IEC 60304, shortest patch element 55 cm, gradation 5 cm 100 N Protective tube IP67 Acc. to IP67 Size of the divider head Diameter divider head max. Diameter pull tool max. for 2 12 fibers 25 mm for fibers 33 mm for 2 12 fibers 33 mm for fibers 43 mm Mechanical characteristics Bending radius static 15 x outer diameter dynamic 20 x outer diameter Fire performance Flame retardancy Halogen free Smoke density IEC / IEC , Cat. C IEC IEC Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +70 C Further characteristics Longitudinally IEC F5 watertight Optical characteristics Insertion loss typ. for all fiber types 0.2 db Return loss typ. G62.5/125 OM1e > 40 db G50/125 OM2e > 40 db G50/125 OM3 > 40 db G50/125 OM4 > 40 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 70 db

83 Office DataCenter Industry 83 GigaLine FO patch cords / trunk cables Plug SC E2000 E2000HRL LC Singlemode OS2 E9..10/125 4 LKD 9Vxx x61n 0000 LKD 9Vxx x61t 0000 LKD 9Vxx x61z 0000 LKD 9Vxx x60h LKD 9Vxx x61o 0000 LKD 9Vxx x61u 0000 LKD 9Vxx x LKD 9Vxx x60i LKD 9Vxx x61p 0000 LKD 9Vxx x61v 0000 LKD 9Vxx x LKD 9Vxx x60k LKD 9Vxx x61q 0000 LKD 9Vxx x61w 0000 LKD 9Vxx x LKD 9Vxx x60l LKD 9Vxx x61r 0000 LKD 9Vxx x61x 0000 LKD 9Vxx x LKD 9Vxx x60m LKD 9Vxx x61s 0000 LKD 9Vxx x61y 0000 LKD 9Vxx x LKD 9Vxx x60n 0000 Multimode OM2e G50/125 4 LKD 9Vxx x61g 0000 LKD 9Vxx x60b LKD 9Vxx x61h 0000 LKD 9Vxx x60c LKD 9Vxx x61i 0000 LKD 9Vxx x60d LKD 9Vxx x61k 0000 LKD 9Vxx x60e LKD 9Vxx x61l 0000 LKD 9Vxx x60f LKD 9Vxx x61m 0000 LKD 9Vxx x60g 0000 Multimode OM3 G50/125 4 LKD 9Vxx x61a 0000 LKD 9Vxx x LKD 9Vxx x61b 0000 LKD 9Vxx x LKD 9Vxx x61c 0000 LKD 9Vxx x LKD 9Vxx x61d 0000 LKD 9Vxx x LKD 9Vxx x61e 0000 LKD 9Vxx x LKD 9Vxx x61f 0000 LKD 9Vxx x60a 0000 Multimode OM4 G50/125 4 LKD 9Vxx x60u 0000 LKD 9Vxx x LKD 9Vxx x60v 0000 LKD 9Vxx x LKD 9Vxx x60w 0000 LKD 9Vxx x LKD 9Vxx x60x 0000 LKD 9Vxx x LKD 9Vxx x60y 0000 LKD 9Vxx x LKD 9Vxx x60z 0000 LKD 9Vxx x Multimode OM1e G62.5/125 4 LKD 9Vxx x60o LKD 9Vxx x60p LKD 9Vxx x60q LKD 9Vxx x60r LKD 9Vxx x60s LKD 9Vxx x60t 0000 xxx = Length in metres, measured from plug side A to plug side B further plug types and fiber numbers on request

84 GigaLine 84 FO patch cords / trunk cables GigaLine Fiber optic trunk cable, outdoor Type KL-A-DQ(ZN)B2Y, pre-assembled at both ends Advantages robust design easy assembly high crush resistance & tensile strength best optical properties GigaLine Trunk A-DQ(ZN)B2Y IP67 Construction Single elements Farbcode Strain relief Cable sheath Divider head Strain relief Patch element Strain relief Dust protection Protection class Up to 48 buffered fibers with strain relief under one sheath, diameter 1.8 mm Acc. to IEC Non-metallic (glass rovings) PE, UV-resistant Colour: black Aluminium 600 N Shortest patch element 55 cm, gradation 5 cm 100 N Protective tube Acc. to IP67 Size of the divider head Diameter divider head max. Diameter pull tool max. for 2 12 fibers 25 mm for fibers 33 mm for 2 12 fibers 33 mm for fibers 43 mm Mechanical characteristics Bending radius static 15 x outer diameter dynamic 20 x outer diameter Fire performance Halogen free IEC Thermal characteristics Transport/storage 25 C up to +70 C Installation 5 C up to +50 C Operating temp. 25 C up to +70 C sonstige Eigenschaften Longitudinally IEC F5 watertight Optical characteristics Insertion loss typ. for all fiber types 0.2 db Return loss typ. G62.5/125 OM1e > 35 db G50/125 OM2e > 35 db G50/125 OM3 > 35 db G50/125 OM4 > 35 db E9..10/125 OS2 > 50 db E9..10/125 OS2 APC > 65 db

85 Office DataCenter Industry 85 GigaLine FO patch cords / trunk cables Plug SC E2000 E2000HRL LC Singlemode OS2 E9..10/125 4 LKD 9Vxx x LKD 9Vxx x00j 0000 LKD 9Vxx x00q LKD 9Vxx x LKD 9Vxx x00k 0000 LKD 9Vxx x00r LKD 9Vxx x LKD 9Vxx x00l 0000 LKD 9Vxx x00s LKD 9Vxx x LKD 9Vxx x00m 0000 LKD 9Vxx x00t LKD 9Vxx x LKD 9Vxx x00n 0000 LKD 9Vxx x00u LKD 9Vxx x00a 0000 LKD 9Vxx x00o 0000 LKD 9Vxx x00v 0000 LKD 9V LKD 9Vxx x00b 0000 LKD 9Vxx x00p 0000 LKD 9Vxx x00w 0000 LKD 9Vxx x01a 0000 Multimode OM2e G50/125 4 LKD 9Vxx x01b 0000 LKD 9Vxx x01p 0000 LKD 9Vxx x LKD 9Vxx x01c 0000 LKD 9Vxx x01q LKD 9Vxx x01d 0000 LKD 9Vxx x LKD 9Vxx x01e 0000 LKD 9Vxx x LKD 9Vxx x LKD 9Vxx x01g 0000 LKD 9Vxx x LKD 9Vxx x01h 0000 LKD 9Vxx x Multimode OM3 G50/ LKD 9V10 062A 0000 LKD 9Vxx x62j LKD 9Vxx x65g 0000 Multimode OM1e G62.5/125 4 LKD 9Vxx x03g 0000 LKD 9Vxx x03u LKD 9Vxx x03h 0000 LKD 9Vxx x03v LKD 9Vxx x03i 0000 LKD 9Vxx x03w LKD 9Vxx x03j 0000 LKD 9Vxx x03x LKD 9Vxx x03l 0000 LKD 9Vxx x03z 0000 xxx = Length in metres, measured from plug side A to plug side B further plug types and fiber numbers on request

86 GigaLine 86 DataCenter links GigaLine DataCenter links

87 Office DataCenter Industry DataCenter links 87 GigaLine GigaLine DataCenter links page GigaLine DataCenter links 88 dc DataCenter link DClink 40/100 OM3 G50/125 DClink 40/100 OM4 G50/ dc DataCenter link dc DataCenter MTP module DClink OS2 E9.10/125 DClink OM3 G50/125 DClink OM4 G50/125 DC MTP module OS2 E9..10/125 DC MTP module OM3 G50/125 DC MTP module OM4 G50/ o Office dc DataCenter i Industry

88 GigaLine 88 DataCenter links GigaLine DataCenter links Quick & easy solution for ready-to-use links in DataCenters DataCenters have special requirements since downtimes there can have catastrophic consequences. It must therefore be ensured that disruptions are kept to a minimum, particularly when carrying out renovation work during operation. LEONI has developed systems for this that take these requirements into consideration right from the construction stages of a new DataCenter. For transmissions up to 10 Gbit/s, fiber pairs are separated from the 12x fiber bundle using an MPO to LC duplex fanout (see Figure) so that 144 channels are available per rack unit. As well as ensuring adherence to the applicable cabling standards, our systems also offer countless options for quick and reliable construction and renovation of DataCenters. DClink 40/100 is a cabling system that is suitable for all transmission protocols. It is delivered as a tested permanent FO link and consists of a cable with 8x12 OM3/OM4 fibers that is already equipped with a partial patch panel at both ends. The preassembled link just has to be installed by snapping it into the socket provided in the patch panel. This allows three GigaLine DClink partial patch panels with 8 MPO couplings each in the patch panel to be fitted at a single level. GigaLine patch cord MPO-MPO (12 OM3/OM4) GigaLine patch cord MPO-6LC-Dx (fanout) To retrofit the system for 40 Gbit/s systems (parallel transmission over 2 x 4 fibers), the fanout simply has to be replaced by simplex MPO patch cords (see Figure) with 12 fibers (24 systems per rack unit). Two simplex MPO patch cords, i.e. 2x12 fibers (parallel transmission over 2 x 10 fibers) are used for 100 Gbit/s (12 systems per rack unit). VarioLine DClink sockets with 3 GigaLine DClink modules 40/100 Gbit/s with 8 MPO each The use of low or medium data rates of up to 10 Gbit/s and higher data rates of up to 40 and 100 Gbit/s can thus be realised without modifications to the permanently installed GigaLine DClink cabling. This allows the fibers to be used both individually for applications up to 10 Gbit/s and in parallel for 40 and 100 Gbit/s. Migration or connection to the necessary transmission technology is carried out via application-specific patch cords. In contrast to conventional cabling systems in which the link has to be replaced, GigaLine DClink offers numerous advantages: Migratability to all data rates used is possible by simply replacing the patch cords (no need to modify the permanent installation) Rapid and economical installation as GigaLine DClink is delivered fully assembled High reliability and quality as GigaLine DClink is tested before leaving the factory Clear arrangement in spite of high packing density

89 Office DataCenter Industry DataCenter links 89 GigaLine GigaLine DataCenter link Connection-ready links up to 100 Gbit/s Advantages for all data rates up to 100 Gbit/s highest degree of preassembly simplest assembly best optical properties GigaLine DClink 40/100 OM3 G50/125 GigaLine DClink 40/100 OM4 G50/125 Description Connection-ready link one DClink module in a high tensile strength connection with a high-quality universal cable at each end. The housing can be opened if necessary and the divider containing the patch elements removed and pulled through tight openings ( diam. 35 mm) with the help of a pull-in tube. Field of application In DataCenters acc. to ISO/IEC and EN (2nd edition). DClink OS3 For all applications from Classes > OF-100(40 and 100 GBE), OF-300 (10 GbE), OF-500 (GbE/Fiber Channel) and OF-2000 (Fast Ethernet) DClink OM4 For all applications from Classes > OF-100(40 and 100 GBE), OF-300 (GigaLine 550), (10 GbE), OF-500 (GbE/FiberChannel) and OF-2000 (Fast Ethernet) DClink-Modul Housing Dimensions Configuration Insertion loss Steel panel, front Jet black RAL mm x 135 mm x 150 mm (HxWxD) 8 MTP / MPO 0.25 db (typ.) Return loss OM3 > 20 db OM4 > 20 db Accessories (optional) GigaLine DClink Pull tool Order no.: LKD 9R Designation Cable type Colour GigaLine DClink 40/100 OM3 GigaLine DClink 40/100 OM4 KL-I-F(ZN)H(ZN)H 8x12 24 G50/125 2,5B1500 0,7F500 (IEC A1a.2) KL-I-F(ZN)H(ZN)H 8x12 24 G50/125 2,5B3500 0,7F500 (IEC A1a.3) Aqua 2,000 Heather violet Laser bandwidth Strain relief Cable sheath MHz x km N mm 2,000 1,000 Halogen-free and lameretardant Sheath diameter 14.0 Configuration Order no. GigaLine DClink OM3 G50/125 GigaLine DClink OM4 G50/125 8 MTP(male) 8 MTP(male) LKD 9R31 6xxx 0000* LKD 9R31 nxxx 0000* xxx = Length between the link modules in m. Further conigurations on request. 1 piece per packing unit. * Wiring: crossed (KBG00007)

90 GigaLine 90 DataCenter links GigaLine DataCenter link Connection-ready links Advantages for all data rates up to 10 Gbit/s highest degree of preassembly simplest assembly GigaLine DClink OS2 E9.10/125 GigaLine DClink OM3 G50/125 GigaLine DClink OM4 G50/125 Description Connection-ready link one DClink module in a high tensile strength connection with a high-quality universal cable at each end. The housing can be opened if necessary and the divider containing the patch elements removed and pulled through tight openings ( diam. 35 mm) with the help of a pull-in tube. Field of application In DataCenters acc. to ISO/IEC and EN (2nd edition). DClink OS2 For all applications up to Class OF DClink OM3 For all applications from Classes OF-300 (10 GbE), OF-500 (GbE/Fiber Channel) and OF-2000 (Fast Ethernet) DClink OM4 For all applications from Classes > OF-300 (GigaLine 550), (10 GbE), OF-500 (GbE/ FiberChannel) and OF-2000 (Fast Ethernet) DClink-Modul Housing Dimensions Configuration Insertion loss Steel panel, front Jet black RAL mm x 135 mm x 150 mm (HxWxD) Fiber optic connector (see table) 0.2 db (typ.) Return loss OS2 > 50 db (PC), > 70 db (APC) OM3 > 40 db OM4 > 40 db Accessories (optional) GigaLine DClink Pull tool Order no.: LKD 9R Designation Cable type GigaLine DClink OS2 KL-U-DQ(ZN)BH 1x12 or 24 E9/125 0,36F3,5/0,22H18 (ITU G652.D) GigaLine DClink OM3 KL-U-DQ(ZN)BH 1x12 or 24 G50/125 2,5B1500 0,7F500 (IEC A1a.2) 2,000 GigaLine DClink OM4 KL-U-DQ(ZN)BH 1x12 or 24 G50/125 2,5B3500 0,7F500 (IEC A1a.3) 4,700 Laser bandwidth Strain relief Cable sheath Sheath diam. MHz x km N mm 1,000 Halogen-free and lameretardant 7.0 (12 fibers) 7.5 (24 fibers) Configuration Order no. GigaLine DClink OS2 E9..10/125 GigaLine DClink OM3 G50/125 GigaLine DClink OM4 G50/125 6 LC Duplex PC 6 LC Duplex PC* LKD 9R20 8xxx 0000 LKD 9R30 8xxx 0000 LKD 9R10 8xxx LC Duplex PC 6 SC Duplex PC* LKD 9R20 9xxx 0000 LKD 9R30 9xxx 0000 LKD 9R10 9xxx SC Duplex PC 6 SC Duplex PC* LKD 9R21 0xxx 0000 LKD 9R31 0xxx 0000 LKD 9R11 0xxx LC Duplex PC 12 LC Duplex PC* LKD 9R21 1xxx 0000 LKD 9R31 5xxx 0000 LKD 9R11 1xxx E2000-Simplex PC 12 E2000 Simplex PC* LKD 9R21 2xxx 0000 LKD 9R31 2xxx 0000 LKD 9R11 2xxx LC Duplex PC 12 E2000 Simplex PC* LKD 9R21 3xxx 0000 LKD 9R31 3xxx 0000 LKD 9R11 3xxx 0000 *Wiring: crossed in pairs (KBG00001) xxx = Length between the link modules in m. Other conigurations on request. 1 piece per packing unit.

91 Office DataCenter Industry DataCenter links 91 GigaLine GigaLine DataCenter MTP module for installation in DClink frame GigaLine DC MTP module OS2 E9..10/125 GigaLine DC MTP module OM3 G50/125 GigaLine DC MTP module OM4 G50/125 Description Connection-ready MTP module for installation in a DClink frame. Field of application In DataCenters and in structured cabling acc. to ISO/IEC and EN (2nd edition). For all applications from Classes >OF-300 (GigaLine 550) (10 GbE), OF-500 (GbE/FiberChannel) und OF-2000 (Fast Ethernet). DC MTP module Housing Dimensions Front side Configuration Insertion loss Return loss Rear Configuration Insertion loss Return loss Fiber types Steel panel, front Jet black RAL mm x 135 mm x 150 mm (HxWxD) max. 12 LC Duplex, 6 SC Duplex, 12 SC-Simplex, 12 E-2000 Simplex typ. 0.2 db > 50 db (SM, PC), > 65 db (SM, APC), > 35 db (MM) 1x or 2x MTP (male) typ. 0.3 db > 50 db (SM), > 20 db (MM) OS2 / OM4 / OM3 Designation Configuration Order no. Configuration Order no. 1 x GigaLine MTP module OS2 E9..10/125 6 LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G x GigaLine MTP module OS2 E9..10/ LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G x GigaLine MTP module OM4 G50/125 6 LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G x GigaLine MTP module OM4 G50/ LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G x GigaLine MTP module OM3 G50/125 6 LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G x GigaLine MTP module OM3 G50/ LC Duplex PC* LKD 9R LC Duplex PC** LKD 9R7G piece per packing unit. * Wiring: crossed (KBG00003) ** Wiring: crossed / twisted in pairs (KBG00006)

92 GigaLine 92

93 Office DataCenter Industry 93 GigaLine Acceptance measurement for GigaLine cabling systems The acceptance measurement for GigaLine cabling systems is carried out in accordance with the requirements of ISO/IEC or EN :2007. DIN ISO/IEC is also relevant to the acceptance measurement. The set measuring range must be twice as big as the transmission link to be measured. The pulse width of the OTDR should be chosen as short as possible. This keeps the dead zones at reflected events to a minimum. For an OTDR measurement, a launch fiber and receive fiber must be used. These must be longer than the dead zone of the OTDR being used. For multimode links, the fiber should be at least 100 m in length; for singlemode links, the fiber should be at least 500 m in length. A bidirectional measurement is necessary to avoid or eliminate measurement errors due to different backscatter coefficients if the overall link consists of several spliced or patched sublinks. Index-adjusting materials must not be used. Maximum attenuation of the transmission links in db Class Multimode Singlemode 850 nm 1,300 nm 1,310 nm 1,550 nm OF OF OF OF OF Attenuation meters OTDR Fiber identifiers Both attenuation meters and OTDR are vital for professional fiber optic installation. The test engineer must have a valid calibration certificate for the testing device.

94 94 Field of application Oice Field of application

95 Office DataCenter Industry Field of application 95 Generic cabling in oice buildings The complete cable system, from distribution equipment to workstation Structure of a generic communication cable system ISO/IEC and DIN EN /2 CD EI FD CP TO TE Campus distributor Building distributor Floor distributor Consolidation point Telecommunications outlet Terminal equipment CD EI FD CP TO TE Subsystem Subsystem of the primary of the secondary cabling cabling system system Subsystem of the tertiary cabling system Generic communication cable system Equipment connection cabling system ISO/IEC and EN ISO/IEC and EN ISO/IEC and EN ISO/IEC and EN Information technology Information technology Information technology Information technology Generic communication cable systems Generic communication cable systems Generic communication cable systems Generic communication cable systems Office buildings Industry Apartments DataCenters ISO/IEC and EN Information technology Generic communication cable systems General requirements These days, the future of a company depends to a large extent on reliable and timely data processing. The rapid development of data bit rates and the wide range of applications require a very flexible, high-performance network infrastructure that will be able to meet the demands for the next ten years. High-quality generic IT networks form the backbone of the business in research & development, banks, insurance companies, universities, hospitals, hotels, airports and many other sectors, providing smooth operation and financial success. The smart use of fiber optics and copper data technologies for the backbone and horizontal wiring to the user enables costeffective networking of standard resources such as PCs and printers, with an extension to IP telephony and multimedia applications. Other applications, such as Power-over-Ethernet (PoE), support the powering of devices such as web cameras, wireless LAN access points, IP phones and laptops via the copper data cabling. These structured, generic communication cable systems meet both the international and European standards set by ISO/IEC and DIN EN /2 respectively.

96 96 Field of application DataCenter Field of application

97 Office DataCenter Industry Field of application 97 Generic cabling in DataCenters Structure of a generic communication cable system ENI MD ZD LDP EO EQP External network interface Main distributor Zone distributor Local distribution point (optional) External network interface Application-specific transmission equipment ENI Distributor acc. to EN Network access MD ZD LDP EO EQP Main distribution cabling Zone distribution cabling Generic communication cable system Equipment cabling ISO/IEC and EN ISO/IEC and EN ISO/IEC and EN ISO/IEC and EN Information technology Information technology Information technology Information technology Generic communication cable systems Generic communication cable systems Generic communication cable systems Generic communication cable systems Office buildings Industry Apartments DataCenters ISO/IEC and EN Information technology Generic communication cable systems General requirements The structure The maximum extension is 2,000 metres. In DataCenters the main distribution cabling is frequently designed using fiber optic technology, while in smaller networks the external network interface (ENI) is connected directly to the zone distributor (ZD). The standards describe various models for flexible and fixed connections in and between the subsystems. The cabling of the main and zone distribution must, according to ISO/IEC 24764, meet the requirements of Class E A for copper technology and transmission classes OF-300, OF-500 and OF-2000 for fiber optic technology as a minimum. The standards Generic communication cable systems are defined in the standards EN and ISO/IEC In addition, specific requirements for DataCenters are defined in EN and ISO/IEC The cabling used in DataCenters consists of three subsystems: Network access cabling Main distribution cabling Zone distribution cabling

98 98 Field of application Requirements and solutions Fast high-quality cost-optimised DataCenter The DataCenter, the heart of the business, controls the production and administrative processes. A failure here can have catastrophic consequences, and the availability of a DataCenter must be therefore guaranteed more or less around the clock. The cabling system makes a key contribution to its operation reliability. Performance requirements for modern DataCenters Maximum availability, zero downtime maximum reliability Short installation times Maximum performance Minimal space requirement high packing density Cost efficiency Environmental compatibility Green IT The diverse requirements for DataCenters cannot be considered separately. For example, optimising the environmental performance will lead to a reduction in costs. Investing in industrially pre-assembled components is usually associated with higher costs, but enables installation and testing times to be reduced, thus reducing the cost associated with downtime. High quality Quality testing at the factory, performance and safety are already built into LEONI products. Minimise downtime Installation and commissioning take a very short time, with no need for special tools or assembly skills. This keeps downtime to a minimum. Cost reduction The use of GigaLine DClink results in cost savings of up to 55 % in comparison with traditional modular systems using MPO connection technology. Costs per link* 100 % Modular solutions with MPO * Example: Link length: 30 m, fibers: 24 x OS2, plugs: LC Duplex 45 % DClink

99 Office DataCenter Industry Field of application 99 The advantages Exceed all requirements with LEONI GigaLine DClink MegaLine DClink GigaLine DCflex LEONI can offer a range of highquality products that go well beyond the current standards and requirements for data centers. VarioLine CP An EC7 plug and the corresponding cable delivers performance far exceeding Class F A Fiber optic cable systems constructed using LEONI cables offer enormous reserves for attenuation and bandwidth The Installation Plug and play solutions for copper and fiber optic applications consist of pre-assembled links and the VarioLine DClink frame (19", 1 RU) for the DClink modules. The DClink modules are simply inserted and clicked into place from the rear after the links are installed. Ecologically aware cabling Environmentally sound materials and production methods, the possibility of recycling or ecologically viable recovery and, last but not least, the reusability of products if required guarantee maximum environmental compatibility. Cables and components are free of hazardous substances. DClink system solutions DClink can be used to create fiber optic, copper or mixed configurations in various categories. This renders on-site assembly completely unnecessary. The modules can be easily removed again using a simple release tool. Optimising attenuation A GigaLine DClink offers up to 70 % less attenuation than conventional modular systems using MPO connectivity. Attenuation per link* I L =1.4 db 100 % Modular solutions with MPO I L =0.4 db > 30 % DClink * Example: Link length: 30 m, fibers: 24 x OS2, plugs: LC Duplex

100 100 Field of application Comparison of cabling systems Single cable vs. multi cable Single cables complex installation and cannot be reused It is not just installing new cables that is difficult and timeconsuming, but also removing the old cables. The only options are either to cut them out or simply leave them where they are. This means that there is no practical way of reusing them and they are not recycled. The disorganised way in which the cables are installed obstructs the flow of cooling air. Only a higher volumetric flow rate and/or a lower air temperature can help here. Both mean higher costs and increased environmental impact.

101 101 Multi cables quick and clean installation and can be reused at any time Pre-assembled multi cable solutions ensure a clean and clear cabling layout in the raised floor. As well as making installation easier and therefore quicker, this also helps to improve cooling air circulation. Cables and components are free of hazardous substances. The low volume of the installed multi cables guarantees an unobstructed flow of cooling air and therefore uses less energy.

102 GigaLine 102 Index Welcome to the mega store for cable and system solutions The LEONI Group 4 High-quality industrial cables and conductors Great brands, great service 6 Green Technology 8 Technologies investment in sustainable security GigaLine FO data cables 12 The fiber 14 For LAN, WAN and SAN 17 Fiber qualities 18 Colour codes 19 Type codes 20 Jacketing material for optical cables 21 Rodent protection for fiber optic cables 22 Pictograms 23 Handling and safety notices 24 GigaLine Indoor cable, duplex fig 8 25 GigaLine Indoor cable, duplex fig 0 26 GigaLine Indoor cable, Mini-Breakout 27 GigaLine Breakout cable 28 GigaLine Universal cable, Mini-Breakout 800 N GigaLine Universal cable, central 2500 N GigaLine Universal cable, stranded 4000 N GigaLine Universal cable, central 2500 N LEONI fire secured FO data cables 33 GigaLine fire secured universal cable, central with CI, 90 min system integrity GigaLine fire secured universal cable, central with CI, 120 min system integrity GigaLine Outdoor cable, central 1750 N 36 GigaLine Outdoor cable, stranded 4000 N GigaLine Outdoor cable, central 1750 N 38 GigaLine Outdoor cable, stranded 4000 N GigaLine Outdoor cable, stranded with sheath, 4000 N GigaLine FO connectivity 42 FO cabling systems 44 GigaLine Trunk and splice boxes 47 Fiber optic trunk box 48 Fiber optic splice box, telescopic 50 Fiber optic splice box, fixed 52 GigaLine Compact fiber optic distribution system 55 Compact fiber optic rack 56 Compact fiber optic module 57 Compact fiber optic module, for splicing solutions GigaLine Office and floor distributors 61 Fiber optic office and floor distributors 62 GigaLine Fiber-To-The-Desk (FTTD) wall outlets FTTD wall outlets for surface / flush mounting FTTD wall outlets Cable reservoir / splice tray FTTD outlet for cable ducts 68 FTTD mounting bracket for cable ducts 69 GigaLine FO patch cords / trunk cables Fiber optic patch cord, breakout 72 FO patch cords LC/PC-Uniboot 74 FO patch cords MTP MTP / MPO patch cord GigaLine Trunk pre-assembled trunk cables Fiber optic trunk cable, Mini-Breakout 78 Fiber optic trunk cable, breakout 80 Fiber optic trunk cable, universal 82 Fiber optic trunk cable, outdoor 84 GigaLine DataCenter links 86 DataCenter links 88 DataCenter link up to 100 Gbit/s 89 DataCenter link, connection-ready 90 DataCenter link MTP module 91 GigaLine Acceptance measurement 93 Office Field of application 94 Generic cabling in office buildings 95 DataCenter Field of application 96 Generic cabling in DataCenters 97 Requirements and solutions 98 The advantages 99 Comparison of cabling systems 100

103 Office DataCenter Industry 103 GigaLine LEONI news Additional catalogues for MegaLine copper systems and VarioLine connection systems available online at. Our regularly updated information services such as the LEONI newsletter keep you abreast of recent developments at LEONI and on the market. Visit our homepage: Here you will find the latest information Product and company news Specialist articles Trade fairs, seminars and roadshows Announcement texts Standardisations/certification programmes