CA Disk Backup and Restore CA RS 1405 Service List

Transcription

1 CA Disk Backup and Restore CA RS 1405 Service List Description Hiper 12.5 RO63713 ENHANCEMENT: MERGE VBACKUP TAPES RO65832 CONFLICTS IF CA ALLOCATE IS IN SAME ZONE RO67768 MSG 9999 & ABEND ADSTH003 W/RO62020 APPLIED, ADD ZFS SUPPORT RO69146 ENHANCEMENT PET ABEND MESSAGES The CA RS 1405 service count for this release is 4

2 CA Disk Backup and Restore 2 CA RS 1405 Service List for CCUWC50 FMID Service Description Hiper CCUWC50 RO63713 ENHANCEMENT: MERGE VBACKUP TAPES RO65832 CONFLICTS IF CA ALLOCATE IS IN SAME ZONE RO67768 MSG 9999 & ABEND ADSTH003 W/RO62020 APPLIED, ADD ZFS SUPPORT RO69146 ENHANCEMENT PET ABEND MESSAGES The CA RS 1405 service count for this FMID is 4

3 CA Disk Backup and Restore CA RS PTF RO RO63713 RO63713 M.C.S. ENTRIES = ++PTF(RO63713) DESC(ENHANCEMENT: MERGE VBACKUP TAPES). ++VER(Z038) FMID(CCUWC50) PRE(RO37466) SUP(T5YR249) /* PROBLEM DESCRIPTION: This enhancement adds a new MERGE parameter, VBACKUPVOLS, which causes MERGE to process volumes that contain VBACKUP data sets rather than standard backup volumes. SYMPTOMS: N/A IMPACT: N/A CIRCUMVENTION: N/A HIPER: NO DISTRIBUTION CODE: A PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release: 12.5 RELATED PROBLEM(S): */. ++HOLD(RO63713) SYSTEM REASON(DOC) FMID(CCUWC50) COMMENT( Product: CA Disk Release 12.5 Publication: Message Reference Guide Chapter 3 Messages Update Message CRITERIA FOR SELECTING MERGE VOLUMES AS A PERCENTAGE OF UTILIZATION: 2424 DISK ARCHIVE VOLUMES USING LESS THAN nn% OF THE ALLOCATED SPACE BPI TAPE ARCHIVE VOLUMES USING LESS THAN nn% OF #len TAPEFEET = (bbbb-feet, cccckb) BPI TAPE ARCHIVE VOLUMES USING LESS THAN nn% OF #len TAPEFEET = (bbbb-feet, cccckb) 2424 CART ARCHIVE VOLUMES USING LESS THAN nn% OF #len CARTFEET = (bbbb-feet, cccckb) 2424 CART ARCHIVE VOLUMES USING LESS THAN nn% OF THE ACTUAL CART SIZE 2424 ONLY PRIMARYn SELECTED 2424 ONLY VBACKUP VOLUMES SELECTED Reason: This group of messages is provided to inform the user of the parameters being used during MERGE processing. Value nn is the value specified in the MERGE PERCENT command parameter. Volumes using less than this percentage of space will be processed by MERGE. All others will be ignored. The value #len is taken from sysparm TAPEFEET or CARTFEET depending on device type. It is one of the values used to determine the percentage of a volume that is full. Value bbbb is based on the values shown for #len and nn, and indicates the number of used tape feet that will determine if it is to be merged. Value cccc is number of kilobytes. If CARTCALC is specified as Y, the used cartridge percent is based on the actual size. PRIMARYn shows which type, PRIMARY1 or PRIMARY2 type Archvols were selected. If VBACKUP VOLUMES message is present, only VBACKUPs Archvols will be selected for merging. Publication: User Guide Chapter 11 MERGE MERGE Command Syntax Add the following command after USEARCHVOL:,VBACKUPVOLS Add the following message after USEARCHVOL description: VBACKUPVOLS

4 CA Disk Backup and Restore CA RS PTF RO63713 This optional parameter causes only VBACKUP volumes to be selected for Merge. By default, Merge bypassed VBACKUP volumes. Note: If the PACK parameter is not used for VBACKUP, sysparm ARCHPACK must be set to N to maintain the one VBACKUP volume data set to one Archvol relationship. Using ARCHPACK set to Y will pack the data sets together just as adding PACK to the VBACKUP command did. ). VERSION(CCTUC60,CCTVC50).

5 CA Disk Backup and Restore CA RS PTF RO RO65832 RO65832 M.C.S. ENTRIES = ++PTF(RO65832) DESC(CONFLICTS IF CA ALLOCATE IS IN SAME ZONE). ++VER(Z038) FMID(CCUWC50) /* PROBLEM DESCRIPTION: S0C4 abends and assembly errors in user exits and usermods if CA Disk is installed in the same zones after CA Allocate. Duplicate name conflicts occur when CA Disk is installed into a target zone that already contains CA Allocate. SMP/E keeps the element from the first product that is installed. The CA Disk copy of the element is not installed because the first product owns the element. SMP/E then ends with RC=0. SYMPTOMS: MAC GSMEPI00 NOT INSTALLED during install of CA Disk 12.5 FMID CCUWC50. ABEND S0C4 in ADSMVS60 GSMEPI00. Assembly errors in CA Disk exits and usermods. IMPACT: CA Disk usermods and exits cannot be assembled. SVC gets S0C4. CIRCUMVENTION: Install the products in different target and distribution zones. HIPER: NO DISTRIBUTION CODE: A PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release: 12.5 RELATED PROBLEM(S): */. ++IF FMID(CCTVC50) THEN REQ(RO65971). ++IF FMID(CCTUC60) THEN REQ(RO69011). VERSION(CCTUC60,CCTVC50).

6 CA Disk Backup and Restore CA RS PTF RO RO67768 RO67768 M.C.S. ENTRIES = ++PTF(RO67768) DESC(MSG 9999 & ABEND ADSTH003 W/RO62020 APPLIED, ADD ZFS SUPPORT). ++VER(Z038) FMID(CCUWC50) PRE(RO21408 RO62020 RO66625) SUP(T T33C038 T5YR251 BR62020) /* PROBLEM DESCRIPTION: 1) Backup/Archive gets a U0100 abend in ADSTH003 with a 9999 message, CALL FUNCTION= 4 IS IN ERROR DUE TO ARCHIVE NOT OPEN, when no volume with enough space can be found for archiving to DASD. 2) Backup/Archive gets a U0100 abend in ADSTH003 with a 9999 message, CALL FUNCTION= 4 IS IN ERROR DUE TO ARCHIVE NOT OPEN, when a DASD volume does not have enough space for archiving to DASD. 3) Backup/Archive gets a U0100 abend in ADSTH003 with a 9999 message, NO C RECORD WRITTEN, when CA Disk hits EOT/EOF on an archvol while processing a multivolume user data set. 4) When backing up a VSAM data set, the catalog work area is too small to access all the VSAM components needed during the Stump process. 5) This enhancement provides support for the backup and restore of zfs data sets. A new value ZFS is added to sysparm USEDSSIO, it allows the DFSMSdss data mover path to be used while writing ARCHVOLS. The user can select or exclude zfs by using ZFS,EQ,YES or ZFS,EQ,NO criteria. 6) When backing up data sets with SCAN REALVOLS with CRI=(CATSTAT,NE,YES) 2885 message will appear if uncataloged SMS PSE data sets are not excluded. SYMPTOMS: 1) U0100 abend in ADSTH NO VOLUME WAS FOUND IN THE DISK POOL TO SATISFY THE MINIMUM ALLOCATION REQUIREMENTS CALL FUNCTION= 4 IS IN ERROR DUE TO ARCHIVE NOT OPEN. 2) U0100 abend in ADSTH SB37-04 ABEND OCCURRED PROCESSING VOLUME=vvvvvv, DSNAME=archive.dsn *0568 dsn NOT PROCESSED - CAPACITY OF ARCHIVE DATA SET EXCEEDED *0501 NO DATA SETS WRITTEN TO ARCHIVE DATA SET VOLUME=vvvvvv KEY=key DSN=archive.dsn 0394 dsn ON volume NOT ARCHIVED DUE TO PREVIOUS ERROR(S) 9999 CALL FUNCTION= 4 IS IN ERROR DUE TO ARCHIVE NOT OPEN 3) U0100 abend in ADSTH NO C RECORD WRITTEN 4) The following messages are issued: ADSVS CATLG SERVICE RETURN CODE IS 40-2 FOR(ddd) ADSVS LENGTH OF CATALOG WORKAREA NEEDED IS nnn BYTES 5) None 6) The following messages from MSGPRINT are issued ADSDM NO JFCB WAS FOUND FOR DDNAME = ADSDM ddd ON vvvvvv NOT ARCHIVED DUE TO PREVIOUS ERROR(S) IMPACT: 1) Backup/Archive jobs have to be rerun 2) Backup/Archive jobs have to be rerun 3) Backup/Archive jobs have to be rerun 4) The data set cannot be backed up. 5) None 6) Error messages cause unnecessary attention since uncataloged SMS PSE will not be processed. CIRCUMVENTION: 1) Remove RO ) Remove RO ) Remove RO ) None 5) None 6) Use CRITERIA=(CATSTAT,NE,YES,AND,PSORG,NE,PSE) to bypass PSE data sets.

7 CA Disk Backup and Restore CA RS PTF RO67768 HIPER: NO DISTRIBUTION CODE: A PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release: 12.5 RELATED PROBLEM(S): */. ++HOLD(RO67768) SYSTEM REASON(DOC) FMID(CCUWC50) COMMENT( Product: CA Disk Release 12.5 Publication: CA Disk System Guide Chapter 6: SYSPARMS, Add the following to the USEDSSIO definitions after LARGE: ZFS - USEDSSIOZFS Processes only zseries File System (zfs) Publication: CA Disk User Guide Chapter 2: Add under the SELECT Command Criteria and their Meanings after VSAMORG ZFS - zseries File System Chapter 2: Add under the SELECT Command DSCL SELECT CRITERIA Field Name Descriptions, after VSAMORG organization type ZFS - zseries File System (yes/no) The value of this field can be set to YES/TRUE/ON or NO/FALSE/OFF. For example, SELECT CRITERIA=(ZFS,EQ,YES) selects all zfs data sets. Chapter 6: Backup/Archive BACKUP and ARCHIVE Considerations under DSCL Selection Criteria, add the following after NOTE: If you want to select ZFS type data sets, you can do so by using the following SELECT statement: SELECT CRITERIA=(ZFS,EQ,YES) If you don't want to select ZFS type data sets, you can do so by using the following SELECT statement: SELECT CRITERIA=(ZFS,EQ,NO) z/fs type data sets are considered as opened VSAM, to prevent unnecessary backups, CRITERIA=(F1MODBIT,EQ,ON) is required. Publication: CA Disk Message Guide 4578 dsn ON volser BYPASSED BECAUSE SYSPARM USEDSSIO IS NOT SET TO ZFS Reason: CA Disk selected a zfs data set during BACKUP or ARCHIVE processing. Neither one of these commands support the zfs data set structure. Action: Add ZFS or * as a value for the USEDSSIO ddd ON vvvvvv BYPASSED BECAUSE DATA SET IS AN UNCATALOGED SMS PDSE/PSE Reason: CA Disk does not support logical backup of uncataloged SMS PDSE and PSE data sets. Action: Exclude or catalog the data set. ).

8 CA Disk Backup and Restore CA RS PTF RO RO69146 RO69146 M.C.S. ENTRIES = ++PTF(RO69146) DESC(ENHANCEMENT PET ABEND MESSAGES). ++VER(Z038) FMID(CCUWC50) PRE(RO21408 RO62020) SUP(T266161) /* PROBLEM DESCRIPTION: When a job abends, the abend messages generated by PET contain only abend code and abending module name. Additional information such as DSN and VOLSER may greatly reduce problem analysis time. SYMPTOMS: No error messages. IMPACT: Limited PET abend information makes problem analysis difficult. CIRCUMVENTION: None HIPER: NO DISTRIBUTION CODE: A PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release: 12.5 RELATED PROBLEM(S): */.