CA Endevor Software Change Manager CA RS 1606 Service List

Transcription

1 CA Endevor Software Change Manager CA RS 1606 Service List Description Type 17.0 RO88314 PACKAGE CAST DOES NOT FAIL IF SUBSYSTEM DOES NOT EXIST PTF RO89322 C1X0250W MESSAGE STOPS THE PROCESSOR EXECUTION PTF RO89346 APPROVER RELATIONSHIP HANG PTF RO89380 ENBE138E/PKMR281E WITH DSNAME MAPPING - HYPHEN PTF RO89407 SHIP RMT CONF MAIL SHOWS FAILED PTF RO89480 INCORRECT BUILT FOR APPROVER NOTIFICATION PTF RO89716 BSTCOPY - C1X0503E MESSAGE STOPS THE EXECUTION PTF RO89859 PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE PTF RO89860 PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE PTF RO90018 OVERRIDE SIGNOUT AUTHORITY INVALID FOR ALTER ACTION PTF RO90031 STEPLIB NOT UNALLOCATED WHEN FIRST DSN=IGNORE PTF RO90034 SCL - CONFUSING ERROR MESSAGE C1BM4100: E049 PTF RO90095 CONPARMX - PARMS MAY NOT BE WRITTEN INTO PARMSMSG PTF The CA RS 1606 service count for this release is 13

2 CA Endevor Software Change Manager 2 CA RS 1606 Service List for CSIQH00 FMID Service Description Type CSIQH00 RO88314 PACKAGE CAST DOES NOT FAIL IF SUBSYSTEM DOES NOT EXIST PTF RO89322 C1X0250W MESSAGE STOPS THE PROCESSOR EXECUTION PTF RO89346 APPROVER RELATIONSHIP HANG PTF RO89380 ENBE138E/PKMR281E WITH DSNAME MAPPING - HYPHEN PTF RO89407 SHIP RMT CONF MAIL SHOWS FAILED PTF RO89480 INCORRECT BUILT FOR APPROVER NOTIFICATION PTF RO89716 BSTCOPY - C1X0503E MESSAGE STOPS THE EXECUTION PTF RO89859 PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE PTF RO90018 OVERRIDE SIGNOUT AUTHORITY INVALID FOR ALTER ACTION PTF RO90031 STEPLIB NOT UNALLOCATED WHEN FIRST DSN=IGNORE PTF RO90034 SCL - CONFUSING ERROR MESSAGE C1BM4100: E049 PTF RO90095 CONPARMX - PARMS MAY NOT BE WRITTEN INTO PARMSMSG PTF The CA RS 1606 service count for this FMID is 12

3 CA Endevor Software Change Manager 3 CA RS 1606 Service List for CSIQH01 FMID Service Description Type CSIQH01 RO89860 PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE PTF The CA RS 1606 service count for this FMID is 1

4 CA Endevor Software Change Manager CA RS PTF RO RO88314 RO88314 M.C.S. ENTRIES = ++PTF (RO88314) PACKAGE CAST DOES NOT FAIL IF SUBSYSTEM DOES NOT EXIST When package with ADD action contains subsystem which does not exist, cast will not fail. Execution of such package will fail with error message C1G0228E and might cause an abend U0806 for corrupted load module. Confusion in diagnose of the problem, because cast does not fail with the proper message. None. CA Endevor SCM Release 17.0 CA Endevor SCM Release 18.0 ENDBAS 6830 Copyright (C) 2016 CA. All rights reserved. R00197-SCM170-SP1 DESC(PACKAGE CAST DOES NOT FAIL IF SUBSYSTEM DOES NOT EXIST). PRE ( RO71576 RO73028 RO85998 ) SUP ( RO79618 RO82015 TR79618 TR82015 TR88314 )

5 CA Endevor Software Change Manager CA RS PTF RO RO89322 RO89322 M.C.S. ENTRIES = ++PTF (RO89322) C1X0250W MESSAGE STOPS THE PROCESSOR EXECUTION Whenever a processor step includes a reserved DD name like CONLIB or C1MSGS1, the allocation of this DD is skipped and the message C1X0250W is issued. However as a additional consequence, the execution of the processor step with reserved DD name is stopped as well as the execution of all following processor steps. This is a bug. The next processor steps should continue with execution. C1X0250W message stops processor execution. Processor execution is stopped. Do not use reserved DD names. CA Endevor SCM Version 16.0 ENDBAS 7329 Copyright (C) 2016 CA. All rights reserved. R00205-SCM170-SP1 DESC(C1X0250W MESSAGE STOPS THE PROCESSOR EXECUTION). PRE ( RO71392 RO76397 RO76715 RO80617 RO82327 ) SUP ( RO73867 RO87806 TR73867 TR87806 TR89322 )

6 CA Endevor Software Change Manager CA RS PTF RO RO89346 RO89346 M.C.S. ENTRIES = ++PTF (RO89346) APPROVER RELATIONSHIP HANG APPROVER RELATIONSHIP HANG When creating an Approver Relationship in F/G, the request may hang This may occur when an Endevor System has more 100 tpye records, and the create of the Approver Relationship specifies a Type that does not exist, or tries to access a Type record greater than 100. The TSO session hangs The TSO session has to be cancelled and the action will not complete None CA Endevor SCM Version 16.0 ENDBAS 7327 Copyright (C) 2016 CA. All rights reserved. R00207-SCM170-SP1 DESC(APPROVER RELATIONSHIP HANG). SUP ( TR89346 )

7 CA Endevor Software Change Manager CA RS PTF RO RO89380 RO89380 M.C.S. ENTRIES = ++PTF (RO89380) ENBE138E/PKMR281E WITH DSNAME MAPPING - HYPHEN A DEFINE SHIPMENT MAPPING RULE dataset name is incorrectly flagged with mesage ENBE138E/PKMR281E (DSN contains an invalid character) whenever either the host or remote dataset names contain a hyphen. Hyphens (-) are a valid character for use in a MVS a dataset name. Error messages ENBE138E/PKMR281E are incorrectly issued Dataset names with hyphens cannot be used. Use dataset names without hyphens. CA Endevor SCM Release 16.0 ENDBAS 7338 Copyright (C) 2016 CA. All rights reserved. R00208-SCM170-SP1 DESC(ENBE138E/PKMR281E WITH DSNAME MAPPING - HYPHEN). PRE ( RO70848 RO71576 ) SUP ( TR89380 )

8 CA Endevor Software Change Manager CA RS PTF RO RO89407 RO89407 M.C.S. ENTRIES = ++PTF (RO89407) SHIP RMT CONF MAIL SHOWS FAILED Package Ship shows *FAILED* for RC=00 in the subject of the remote confirmation notification . Package Ship shows *FAILED* for RC=00 in the subject of the remote confirmation notification . Misleading None ENDBAS 7337 Copyright (C) 2016 CA. All rights reserved. R00210-SCM170-SP1 DESC(SHIP RMT CONF MAIL SHOWS FAILED). SUP ( TR89407 )

9 CA Endevor Software Change Manager CA RS PTF RO RO89480 RO89480 M.C.S. ENTRIES = ++PTF (RO89480) INCORRECT BUILT FOR APPROVER NOTIFICATION An incorrect FROM address is built for approver notification when NOTFOPT option 2 is selected in sample user exit XIT7MAIL. The DOMAIN name is missing. If NOTFOPT option 2 is selected the address is being built as follows: From: GOLED01@USILCA11 where GOLED01 is the USERID from field PECBUSER USILCA11 is the HOSTNAME It should be built as follows: From: GOLED01@USILCA11.CA.COM where GOLED01 is the contents of PECBUSER USILCA11 is the HOSTNAME CA.COM is the DOMAIN name The same error occurs for Mail From: An incorrect is built. An incorrect is built. None CA Endevor SCM Version 16.0 ENDBAS 7336 Copyright (C) 2016 CA. All rights reserved. R00212-SCM170-SP1 DESC(INCORRECT BUILT FOR APPROVER NOTIFICATION). SUP ( TR89480 )

10 CA Endevor Software Change Manager CA RS PTF RO RO89716 RO89716 M.C.S. ENTRIES = ++PTF (RO89716) BSTCOPY - C1X0503E MESSAGE STOPS THE EXECUTION BSTCOPY can be used to copy between PDS load libraries and PDSE load libraries, from PDSE to PDSE, and from PDSE back to PDS. When a member selected to be copied is already present in an output library and the replace parameter (R) is not specified in the select member statement, BSTCOPY will issue the C1X0503E error message and stop processing with RC=12. However if there are more members selected and they don't exist in the target library, they are not copied after C1X0503E is issued. This behavior is in conflict with IEBCOPY behavior which issue warning message about member already existing in the output library, but the action continues. BSTCOPY should mimic IEBCOPY as much as possible. Processing is stopped after C1X0503E error message is issued Users' confusion due to different behavior than IEBCOPY. None. CA Endevor SCM Version 16.0 ENDBAS 7325 Copyright (C) 2016 CA. All rights reserved. R00215-SCM170-SP1 DESC(BSTCOPY - C1X0503E MESSAGE STOPS THE EXECUTION). PRE ( RO71397 RO71576 RO72200 RO72695 RO74136 RO74600 RO75121 RO78177 RO78325 RO80617 RO82327 RO84103 RO85998 RO86723 RO88260 RO89542 ) SUP ( RO72103 RO81545 RO88124 TR72103 TR81545 TR88124 TR88729 TR89716 ) ++HOLD (RO89716) SYSTEM FMID(CSIQH00) REASON (ACTION ) DATE (16119) COMMENT ( SEQUENCE Before Apply PURPOSE This PTF updates an Endevor TABLE in the CSIQSRC library. If you have customized the TABLE delivered by this PTF, you must backup your customized version of the TABLE before applying this PTF to avoid losing your changes. USERS All Endevor users. AFFECTED KNOWLEDGE 1. SMP/e REQUIRED 2. Endevor Administration 3. Endevor TABLES ACCESS Update access to the CSIQAUTU library. REQUIRED ************************** * STEPS TO PERFORM * **************************

11 CA Endevor Software Change Manager CA RS PTF RO Backup any customized TABLES in CSIQSRC that this PTF supplies. 2. APPLY this PTF. 3. Re-apply your customizations to the updated TABLES in CSIQSRC. 4. Assemble and Link the updated TABLE to the CSIQAUTU library. ).

12 CA Endevor Software Change Manager CA RS PTF RO RO89859 RO89859 M.C.S. ENTRIES = ++PTF (RO89859) PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE ISPF panel ENDIE407 is displayed when browse or edit actions are requested for the element with compromised footprint. If terminal model 2 is used, the panel ENDIE407 is not displayed and the whole Endevor session is terminated. IBM error ISPP121 Users' confusion Use terminal model 4 or higher CA Endevor SCM Version 16.0 ENDBAS 7347 Copyright (C) 2016 CA. All rights reserved. R00216-SCM170-SP1 DESC(PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE). PRE ( RO78402 ) SUP ( TR89859 ) ++IF FMID(CSIQH01) REQ(RO89860 ). ++HOLD (RO89859) SYSTEM FMID(CSIQH00) REASON (ACTION ) DATE (16141) COMMENT ( SEQUENCE Before Apply PURPOSE This PTF updates PANELS in the CSIQPENU library. If you have customized the PANEL(S) delivered by this PTF, you must backup your customized version of the PANEL(S) before applying this PTF to avoid losing your changes. USERS All Endevor users. AFFECTED KNOWLEDGE 1. SMP/e REQUIRED 2. Endevor Administration 3. Endevor PANELS ACCESS No special access is required. REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Backup any customized PANELS in CSIQPENU that this PTF supplies. 2. APPLY this PTF. 3. Re-apply your customizations to the updated PANELS in CSIQPENU. ).

13 CA Endevor Software Change Manager CA RS PTF RO RO89860 RO89860 M.C.S. ENTRIES = ++PTF (RO89860) PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE ISPF panel ENDIE407 is displayed when browse or edit actions are requested for the element with compromised footprint. If terminal model 2 is used, the panel ENDIE407 is not displayed and the whole Endevor session is terminated. IBM error ISPP121 Users' confusion Use terminal model 4 or higher CA Endevor SCM Version 16.0 ENDBAS 7347 Copyright (C) 2016 CA. All rights reserved. R00216-SCM170-SP1 DESC(PANEL ENDIE407 - TERMINAL MODEL 2 INCOMPATIBLE). FMID (CSIQH01) PRE ( RO78403 ) SUP ( TR78225 TR89860 ) ++IF FMID(CSIQH00) REQ(RO89859 ). ++HOLD (RO89860) SYSTEM FMID(CSIQH01) REASON (ACTION ) DATE (16141) COMMENT ( CA Endevor SCM Japanese Localization Version 17.0 SEQUENCE Before Apply PURPOSE This PTF updates PANELS in the CSIQPJPN library. If you have customized the PANEL(S) delivered by this PTF, you must backup your customized version of the PANEL(S) before applying this PTF to avoid losing your changes. USERS All Endevor users. AFFECTED KNOWLEDGE 1. SMP/e REQUIRED 2. Endevor Administration 3. Endevor PANELS ACCESS No special access is required. REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. Backup any customized PANELS in CSIQPJPN that this PTF supplies. 2. APPLY this PTF. 3. Re-apply your customizations to the updated PANELS in CSIQPJPN. ).

14 CA Endevor Software Change Manager CA RS PTF RO RO90018 RO90018 M.C.S. ENTRIES = ++PTF (RO90018) OVERRIDE SIGNOUT AUTHORITY INVALID FOR ALTER ACTION When an Alter action is executed that requires the signout to be overridden, the check for override signout authorization is using "ALTER" instead of "SIGNOVR" for access with the external security interface (ESI). This results in anyone having Alter access having Signout Override access for the Alter action. A user that has Alter access but does not have Override Signout access is allowed to override signout during an Alter action. Unauthorized access to Signout Override for Alter. Note that this affects the Alter action only, no other actions. None. ENDBAS 7352 Copyright (C) 2016 CA. All rights reserved. R00218-SCM170-SP1 DESC(OVERRIDE SIGNOUT AUTHORITY INVALID FOR ALTER ACTION). PRE ( RO71576 ) SUP ( RO77211 RO80208 RO88768 TR77211 TR80208 TR88768 TR90018 )

15 CA Endevor Software Change Manager CA RS PTF RO RO90031 RO90031 M.C.S. ENTRIES = ++PTF (RO90031) STEPLIB NOT UNALLOCATED WHEN FIRST DSN=IGNORE If processor step contains STEPLIB ddname with first DD statement containing DSN=IGNORE parameter and second DD statement is regular dataset, such STEPLIB ddname will not be freed after the processor execution. Datasets in STEPLIB ddname are not freed. During package execution with many elements the maximum number of dataset allocation might be reached and no further allocation will be allowed. None. CA Endevor SCM Release 16.0 ENDBAS 7349 Copyright (C) 2016 CA. All rights reserved. R00219-SCM170-SP1 DESC(STEPLIB NOT UNALLOCATED WHEN FIRST DSN=IGNORE). PRE ( RO71392 RO72695 RO74692 RO80640 RO88260 ) SUP ( RO75059 TR75059 TR90031 )

16 CA Endevor Software Change Manager CA RS PTF RO RO90034 RO90034 M.C.S. ENTRIES = ++PTF (RO90034) SCL - CONFUSING ERROR MESSAGE C1BM4100: E049 When using several SCL SET statements of the same kind (for example SET FROM), SET should remains in effect until the system encounters another SET statement or a CLEAR statement, or when processing ends. The SET statements append to each other statements of the same type unless the statement contains set of the value that supersedes all previous. However using SET in following example with ADD element action will result in C1BM4100: E049 error message being issued. SET FROM ENV 'ENV1' SYS 'P7341' SUB 'SUBS1' TYP 'TEXT' STA 1. SET FROM DDN ADDELM. SET TO ENV 'ENV1' SYS 'P7341' SUB 'SUBS1' TYP 'TEXT'. ADD ELEMENT TEXT02. C1BM4100: E049 FROM "ENDEVOR" NOT VALID FOR THIS ACTION. The user can be mistaken while the last SET FROM is using a DDName, however the error message says Endevor location is used. C1BM4100: E049 error message with no clear link to the use SET statement. Users' confusion. Use CLEAR command in between two SETs. CA Endevor SCM Version 16.0 ENDBAS 7341 Copyright (C) 2016 CA. All rights reserved. R00220-SCM170-SP1 DESC(SCL - CONFUSING ERROR MESSAGE C1BM4100: E049). PRE ( RO71576 RO73497 RO74600 ) SUP ( RO78317 TR78317 TR90034 )

17 CA Endevor Software Change Manager CA RS PTF RO RO90095 RO90095 M.C.S. ENTRIES = ++PTF (RO90095) CONPARMX - PARMS MAY NOT BE WRITTEN INTO PARMSMSG The CONPARMX utility dynamically builds execution parameters for processor step programs such as compilers or the linkage editor. It builds a parameter string and optionally invokes a program depending on how you code the utility. This utility uses several parameters. Parameter parm8 specifies whether to build a parameter string to a file. It has two possible values: 1) The first is Y which writes the parameter string to the PARMS DD statement and the parm1 program is not invoked. This data set can then be used as input to a processor step that follows. 2) The second one is N (Default) passes the parameter string to the parm1 program and invokes it. The parameter string is not written to the PARMS DD statement. PARMSMSG DD statement specifies that the output parameter string value is written to this data set for diagnostic purposes. In case of parm8 is coded as Y and PARMSMSG is allocated, no output is printed to PARMSMSG. This is a bug. PARMSMSG containing "NULL OUTPUT OPTIONS STRING" Users' confusion None. CA Endevor SCM Version 16.0 ENDBAS 7330 Copyright (C) 2016 CA. All rights reserved. R00221-SCM170-SP1 DESC(CONPARMX - PARMS MAY NOT BE WRITTEN INTO PARMSMSG). SUP ( RO72204 TR72204 TR90095 )