CA XCOM Data Transport for z/os CA RS 1403 Service List

Transcription

1 CA XCOM Data Transport for z/os CA RS 1403 Service List Description Hiper 11.6 RO61834 INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS RO62912 XCOMM0099E SEND DATA LENGTH > WITH TCPIP TRANSFERS RO63279 MSTRCATU=NO PARAMETER IGNORED RO64318 XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED RO64611 INCORRECT MESSAGE DURING TYPE=INQUIRE TRANSFER RO64895 SERVER - XCOMLOG DISPLAYS WRONG VALUE FOR JOBACB PARAMETER RO65110 PING DOES NOT HONOR PORT NUMBER RO65224 XCOMM0104E - INVALID DATA RECEIVED - EXPECTING MEMBER NAME The CA RS 1403 service count for this release is 8

2 CA XCOM Data Transport for z/os CA RS 1403 Service List Description Hiper 11.5 RO61821 INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS RO63638 BATCH - LUSER/LPASS SECURITY FOR TYPE=SCHEDULE RO67217 TRANSFER HANGS AND FAILS WITH MESSAGE XCOMM0714E The CA RS 1403 service count for this release is 3

3 CA XCOM Data Transport for z/os 3 CA RS 1403 Service List for CBXGB50 FMID Service Description Hiper CBXGB50 RO61821 INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS RO63638 BATCH - LUSER/LPASS SECURITY FOR TYPE=SCHEDULE RO67217 TRANSFER HANGS AND FAILS WITH MESSAGE XCOMM0714E The CA RS 1403 service count for this FMID is 3

4 CA XCOM Data Transport for z/os 4 CA RS 1403 Service List for CBXGB60 FMID Service Description Hiper CBXGB60 RO61834 INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS RO62912 XCOMM0099E SEND DATA LENGTH > WITH TCPIP TRANSFERS RO63279 MSTRCATU=NO PARAMETER IGNORED RO64318 XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED RO64611 INCORRECT MESSAGE DURING TYPE=INQUIRE TRANSFER RO64895 SERVER - XCOMLOG DISPLAYS WRONG VALUE FOR JOBACB PARAMETER RO65110 PING DOES NOT HONOR PORT NUMBER RO65224 XCOMM0104E - INVALID DATA RECEIVED - EXPECTING MEMBER NAME The CA RS 1403 service count for this FMID is 8

5 CA XCOM Data Transport for z/os CA RS PTF RO RO61834 RO61834 M.C.S. ENTRIES = ++PTF (RO61834) INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS The INQWAIT value specified for an XCOMJOB TYPE=INQUIRE job is not being honored correctly. The actual time for the inquire is double the value that is specified by the INQWAIT parameter. The time for a XCOMJOB TYPE=INQUIRE is twice as long as the specified INQWAIT time. The status of transfers for TYPE=INQUIRE jobs will not be done within the time specified by the INQWAIT parameter. Set the INQWAIT value for half of the desired time for the TYPE=INQUIRE job. PRODUCT(S) AFFECTED: CA XCOM Data Transport for z/os r11.5 CA XCOM Data Transport for z/os r11.6 XCMVS 1136 Copyright (C) 2013 CA. All rights reserved. R00099-BXG116-SP1 DESC(INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS). PRE ( RO56104 ) SUP ( RO54346 RO55001 TR54346 TR55001 TR61834 )

6 CA XCOM Data Transport for z/os CA RS PTF RO RO62912 RO62912 M.C.S. ENTRIES = ++PTF (RO62912) XCOMM0099E SEND DATA LENGTH > WITH TCPIP TRANSFERS An XCOMM0099E error occurs when sending a file with COMPRESSION=ZLIB or LZLARGE and PACK=LENGTH using TCP/IP. This occurs for both type=execute and type=schedule transfers. The following message is displayed on the XCOMLOG. XCOMM0099E SEND DATA LENGTH > The transfer fails to complete. Specify COMPRESS=NO or remove PACK=LENGTH and rerun the transfer. PRODUCT(S) AFFECTED: CA XCOM Data Transport r11.6 XCMVS 1153 Copyright (C) 2013 CA. All rights reserved. R00107-BXG116-SP1 DESC(XCOMM0099E SEND DATA LENGTH > WITH TCPIP TRANSFERS). SUP ( TR62912 )

7 CA XCOM Data Transport for z/os CA RS PTF RO RO63279 RO63279 M.C.S. ENTRIES = ++PTF (RO63279) MSTRCATU=NO PARAMETER IGNORED When creating a dataset which has no alias, the transfer completes and catalogs the dataset in the Master Catalog even though the MSTRCATU parameter is set to NO in the XCOMDFLT table or TYPE=CONFIG member. A LISTCAT of the dataset in question shows that it is cataloged in the Master Catalog. The Master Catalog will contain entries that the user did not request. None PRODUCT(S) AFFECTED: CA XCOM Data Transport r11.5 CA XCOM Data Transport r11.6 XCMVS 1156 Copyright (C) 2013 CA. All rights reserved. R00109-BXG116-SP1 DESC(MSTRCATU=NO PARAMETER IGNORED). PRE ( RO51241 RO59725 ) SUP ( RO51950 RO57670 RO57769 RO58310 RO59456 TR51950 TR57670 TR57769 TR58310 TR59456 TR63279 )

8 CA XCOM Data Transport for z/os CA RS PTF RO RO64318 RO64318 M.C.S. ENTRIES = ++PTF (RO64318) XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED XCOM server correctly receives message XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED TRANSACTION. However, the message does not directly indicate the cause of the insufficient storage. The following message is displayed on the XCOMLOG. XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED TRANSACTION The CA-XCOM server may need to be recycled if the condition persists. Increase the REGION size of the CA-XCOM server if it is too small. PRODUCT(S) AFFECTED: CA XCOM Data Transport r11.6 XCMVS 1160 Copyright (C) 2013 CA. All rights reserved. R00111-BXG116-SP1 DESC(XCOMM1122E - INSUFFICIENT STORAGE TO ATTACH THE REQUESTED). SUP ( TR64318 )

9 CA XCOM Data Transport for z/os CA RS PTF RO RO64611 RO64611 M.C.S. ENTRIES = ++PTF (RO64611) INCORRECT MESSAGE DURING TYPE=INQUIRE TRANSFER After multiple transfers have been scheduled either through TCP/IP or to servers in a PLEXQ, a TYPE=INQUIRE XCOMJOB will then result in an incorrect error message being returned. The following incorrect error message is being returned for a TYPE=INQUIRE XCOMJOB after multiple successful transfers have been scheduled to a PLEXQ group of servers: "XCOMM0656I NO HISTORY RECORD FOR REQUEST nnnnnn" The following incorrect error message is being returned for a TYPE=INQUIRE XCOMJOB after multiple successful transfers have been scheduled through TCP/IP: "XCOMM0657I REQUEST nnnnnn NOT COMPLETED:" Unable to properly determine the status of the transfer requests when running an XCOMJOB TYPE=INQUIRE. None. PRODUCT(S) AFFECTED: CA XCOM Data Transport for z/os r11.6 XCMVS 1161 Copyright (C) 2013 CA. All rights reserved. R00112-BXG116-SP1 DESC(INCORRECT MESSAGE DURING TYPE=INQUIRE TRANSFER). SUP ( TR64611 )

10 CA XCOM Data Transport for z/os CA RS PTF RO RO64895 RO64895 M.C.S. ENTRIES = ++PTF (RO64895) SERVER - XCOMLOG DISPLAYS WRONG VALUE FOR JOBACB PARAMETER When the JOBACB parameter is specified in the TYPE=CONFIG member, the XCOMLOG for the CA XCOM server will display a different value than what was specified. Since this parameter is only used by the XCOMJOB batch job, its value should not even be displayed in the XCOMLOG for the server. The following message is displayed on the XCOMLOG during start up. XCOMM0991I JOBACB = XCOM where XCOM is not the value of the JOBACB parameter in the TYPE=CONFIG member used to start up the CA XCOM server. The display of the JOBACB parameter on the XCOMLOG of the CA XCOM server may cause confusion to the CA XCOM administrator though the CA XCOM server will work normally since this parameter is not used by the server. None PRODUCT(S) AFFECTED: CA XCOM Data Transport r11.6 XCMVS 1165 Copyright (C) 2013 CA. All rights reserved. R00113-BXG116-SP1 DESC(SERVER - XCOMLOG DISPLAYS WRONG VALUE FOR JOBACB PARAMETER). PRE ( RO56357 RO56967 RO58083 RO58944 ) SUP ( RO60525 RO62275 TR60525 TR62275 TR64895 )

11 CA XCOM Data Transport for z/os CA RS PTF RO RO65110 RO65110 M.C.S. ENTRIES = ++PTF (RO65110) PING DOES NOT HONOR PORT NUMBER When a TYPE=DEST member that specifies values for IPPORT and IPNAME is enabled, the CA XCOM PING command using that IPNAME will use the IPPORT from the TYPE=DEST menber and ignore any IPPORT specified on on the command. The PING request fails with the following error message: XCOMM0780E Txpi 308: TxpiInitSSL Failed msg = <error:1408f10b:ssl routines:ssl3_get_record:wrong version number> value = The PING command does not honor the IPPORT specified on the command. Disable the TYPE=DEST member and execute the PING command again. PRODUCT(S) AFFECTED: CA XCOM Data Transport r11.6 XCMVS 1167 Copyright (C) 2013 CA. All rights reserved. R00114-BXG116-SP1 DESC(PING DOES NOT HONOR PORT NUMBER). SUP ( TR65110 )

12 CA XCOM Data Transport for z/os CA RS PTF RO RO65224 RO65224 M.C.S. ENTRIES = ++PTF (RO65224) XCOMM0104E - INVALID DATA RECEIVED - EXPECTING MEMBER NAME Library transfers used to transfer multiple members to a single sequential file on a CA XCOM for z/os server with LIBNEG=YES fails with message: XCOMM0104E INVALID DATA RECEIVED - EXPECTING MEMBER NAME Library transfers with a sequential file as the target fail with message: XCOMM0104E INVALID DATA RECEIVED - EXPECTING MEMBER NAME Transfer fails and data is not sent. None PRODUCTS AFFECTED: CA XCOM Data Transport for z/os r11.6 XCMVS 1162 Copyright (C) 2013 CA. All rights reserved. R00115-BXG116-SP1 DESC(XCOMM0104E - INVALID DATA RECEIVED - EXPECTING MEMBER NAME). PRE ( RO50683 RO51213 RO52043 RO52912 RO59725 ) SUP ( RO51305 RO53772 RO57557 TR51305 TR53772 TR57557 TR65224 )

13 CA XCOM Data Transport for z/os CA RS PTF RO RO61821 RO61821 M.C.S. ENTRIES = ++PTF (RO61821) INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS The INQWAIT value specified for an XCOMJOB TYPE=INQUIRE job is not being honored correctly. The actual time for the inquire is double the value that is specified by the INQWAIT parameter. The time for a XCOMJOB TYPE=INQUIRE is twice as long as the specified INQWAIT time. The status of transfers for TYPE=INQUIRE jobs will not be done within the time specified by the INQWAIT parameter. Set the INQWAIT value for half of the desired time for the TYPE=INQUIRE job. PRODUCT(S) AFFECTED: CA XCOM Data Transport for z/os r11.5 CA XCOM Data Transport for z/os r11.6 XCMVS 1136 Copyright (C) 2013 CA. All rights reserved. R00185-BXG115-SP1 DESC(INQWAIT VALUE NOT HONORED FOR TYPE=INQUIRE JOBS). FMID (CBXGB50) PRE ( RO22200 ) SUP ( RO35965 RO51064 RO53831 RO54371 TR35965 TR51064 TR53831 TR54371 TR61821 )

14 CA XCOM Data Transport for z/os CA RS PTF RO RO63638 RO63638 M.C.S. ENTRIES = ++PTF (RO63638) BATCH - LUSER/LPASS SECURITY FOR TYPE=SCHEDULE After applying RO42428, TYPE=SCHEDULE batch jobs that specify an LUSER and LPASS perform a premature security check. Any TYPE=SCHEDULE transfers using LUSER and LPASS in SYSIN01 may receive error messages indicating an invalid userid or password. The actual message varies based on the external security package used. Unauthorized jobs will also receive messages indicating APF authorization is required. TYPE=SCHEDULE batch jobs may fail if the correct local userid and password are not entered, or if the job is not APF authorized. Provide a correct local userid and password for TYPE=SCHEDULE transfers for the system where the XCOM batch job is run. The batch job also has to run in the APF authorized mode. PRODUCTS AFFECTED: CA XCOM Data Transport r11.5 XCMVS 1154 Copyright (C) 2013 CA. All rights reserved. R00188-BXG115-SP1 DESC(BATCH - LUSER/LPASS SECURITY FOR TYPE=SCHEDULE). FMID (CBXGB50) PRE ( RO20628 RO21687 RO22200 RO23794 RO30681 RO47775 RO50875 RO58414 ) SUP ( RO42428 RO46944 TR21687 TR30681 TR42428 TR46944 TR63638 ) ++HOLD (RO63638) SYSTEM FMID(CBXGB50) REASON (ACTION ) DATE (13329) COMMENT ( Product: CA XCOM Data Transport for z/os Release 11.5 Sequence: AFTER APPLY. Purpose: Update customized load modules XCOMTOPS and XCOMRACF. Relevance: Only for users that run customized XCOMTOPS or XCOMRAF. security modules based on XCOM samples. Knowledge required: Assembling programs, location of Common Services macros Access required: CA XCOM sample, JCL, macro and load libraries Steps to Perform: 1. Apply the fix. 2. Customize the updated samples based on your security package. - For CA Top Secret Security, customize sample CAI.CBXGSAMP(XCOMTOPS). - For IBM RACF, customize sample CAI.CBXGSAMP(XCOMRACF). 3. Reassemble the customized samples based on your security package. - For CA Top Secret Security, use CAI.CBXGJCL(ASMTOPSU). - For IBM RACF, use CAI.CBXGJCL(ASMRACFU). 4. Recycle CA XCOM server. ).

15 CA XCOM Data Transport for z/os CA RS PTF RO RO67217 RO67217 M.C.S. ENTRIES = ++PTF (RO67217) TRANSFER HANGS AND FAILS WITH MESSAGE XCOMM0714E After applying RO61115, long running XCOM SNA transfers between z/os systems hang and fail with an error message XCOMM0714E VTAM COMMAND TIMEOUT. Transfer will start and then messages will appear in the XCOM logs: XCOMM0186E ÝXCOM1 RC 0C FDBK2 0B SENSE SEND XCOMM0714E VTAM COMMAND TIMEOUT, ABORTING SESSION WITH SLU=ÝXCOM2 XCOMM0096E RECEIVE REQUEST ENDED DUE TO VTAM ERROR XCOMM0186E ÝXCOM2 RC 00 FDBK2 00 SENSE RECEIVE The SEND/RECEIVE in the error messages above may be swapped. The hanging transfer will keep the VTAM session active until the VTAM TIMEOUT limitation is reached. Other SNA transfers may queue up until this transfer fails and makes an available VTAM session. None PRODUCTS AFFECTED: CA XCOM Data Transport r11.5 XCMVS 1170 Copyright (C) 2014 CA. All rights reserved. R00193-BXG115-SP1 DESC(TRANSFER HANGS AND FAILS WITH MESSAGE XCOMM0714E). FMID (CBXGB50) PRE ( RO23447 RO27048 RO29298 RO48041 ) SUP ( AR61115 RO55673 RO61115 TR55673 TR61115 TR67217 )