CA InterTest Batch CA RS 1404 Service List

Transcription

1 CA InterTest Batch CA RS 1404 Service List Description Hiper 8.5 RO63174 WAITING FOR LOCK AFTER JAVA OUTOFMEMORYERROR RO63533 SUPPORT FOR COBOL 5.1 RO64155 GUI HANGS WITH LARGE NUMBERS OF BREAKPOINTS RO64350 S0C4 ABEND OCCURS WHEN DEBUGGING COBOL PROGRAM WITH XML VERB RO64748 PERFORMANCE PROBLEMS MONITORING IN-LINE PERFORM STATEMENTS RO65018 BATCH LINK INITIAL INTERCEPT LISTING SHOWS COMPILE OPTION RO65123 JCL CONVERSION ERROR WHEN PARM IS 63 CHARACTERS LONG RO C4 ABEND AFTER SIMULATING BAKR, PR INSTRUCTIONS IN AMODE 64 RO65605 PROC OVERRIDE MISSING FROM CONVERTED JCL RO65671 S0C4 ABEND IN CAMRTPC WHEN SIMULATING ESTAEX RESET RO65996 SCROLLING ERRORS WHEN SCREEN LONGER THAN 43 ROWS RO67663 SUPPORT SYSPLEX DEBUGGING RO67666 INTERTEST GUI SYSPLEX SUPPORT RO67667 INTERTEST GUI SYSPLEX SUPPORT The CA RS 1404 service count for this release is 14

2 CA InterTest Batch 2 CA RS 1404 Service List for CMR8500 FMID Service Description Hiper CMR8500 RO63533 SUPPORT FOR COBOL 5.1 RO64155 GUI HANGS WITH LARGE NUMBERS OF BREAKPOINTS RO64350 S0C4 ABEND OCCURS WHEN DEBUGGING COBOL PROGRAM WITH XML VERB RO64748 PERFORMANCE PROBLEMS MONITORING IN-LINE PERFORM STATEMENTS RO65018 BATCH LINK INITIAL INTERCEPT LISTING SHOWS COMPILE OPTION RO65123 JCL CONVERSION ERROR WHEN PARM IS 63 CHARACTERS LONG RO C4 ABEND AFTER SIMULATING BAKR, PR INSTRUCTIONS IN AMODE 64 RO65605 PROC OVERRIDE MISSING FROM CONVERTED JCL RO65671 S0C4 ABEND IN CAMRTPC WHEN SIMULATING ESTAEX RESET RO65996 SCROLLING ERRORS WHEN SCREEN LONGER THAN 43 ROWS RO67663 SUPPORT SYSPLEX DEBUGGING The CA RS 1404 service count for this FMID is 11

3 CA InterTest Batch 3 CA RS 1404 Service List for CVH8500 FMID Service Description Hiper CVH8500 RO67666 INTERTEST GUI SYSPLEX SUPPORT The CA RS 1404 service count for this FMID is 1

4 CA InterTest Batch 4 CA RS 1404 Service List for CVH8501 FMID Service Description Hiper CVH8501 RO63174 WAITING FOR LOCK AFTER JAVA OUTOFMEMORYERROR RO67667 INTERTEST GUI SYSPLEX SUPPORT The CA RS 1404 service count for this FMID is 2

5 CA InterTest Batch CA RS PTF RO RO63174 RO63174 M.C.S. ENTRIES = ++PTF (RO63174) WAITING FOR LOCK AFTER JAVA OUTOFMEMORYERROR After Java heap space is exhausted, an internal lock can remain enabled and new GUI requests will be put into a wait state, with multiple instances of this message appearing in the GUI server's STDOUT log: EDT:Seq:nnnn Waiting for Lock Error messages will appear in the server log noting that Java heap space has been exhausted: BPXM023I JVMDUMP039I Processing dump event "systhrow", detail "java/lang/outofmemoryerror" After this, the server will appear to be hung to the GUI users. Multiple instances of this message will appear in STDOUT: EDT:Seq:nnnn Waiting for Lock GUI users will not be able to use the server. Recycle the GUI server. PRODUCT(S) AFFECTED: Testing & Fault Mgmt Tools Common Sym Release 8.5 TFMSYM 316 Copyright (C) 2014 CA. All rights reserved. R00087-AVH850-SP1 DESC(WAITING FOR LOCK AFTER JAVA OUTOFMEMORYERROR). FMID (CVH8501) PRE ( RO16153 RO23713 RO28014 RO56482 RO61424 ) SUP ( RO50589 TR50589 TR63174 ) ++HOLD (RO63174) SYSTEM FMID(CVH8501) REASON (ACTION ) DATE (14024) COMMENT ( PRODUCT: TESTING & FAULT MGMT TOOLS COMMON SYM C RELEASE 8.5 SEQUENCE: AFTER APPLY Purpose: Update CA-InterTest GUI Server Relevance: CA-InterTest GUI Server Knowledge required: CA-InterTest Production Administration, SMP/E and OMVS commands Access required: Superuser access to Unix System Services HFS for CA-InterTest Steps to Perform: 1. After SMP/E APPLY you must set the permissions to 777 by issuing: chmod 777 intertest.jar 2. Cycle the server 3. Verify that the version displayed is as follows: EDT:Implementation-Version: U I ). BINARY LINK('intertest.jar') PARM(PATHMODE(0,7,5,5)).

6 CA InterTest Batch CA RS PTF RO RO63533 RO63533 M.C.S. ENTRIES = ++PTF (RO63533) SUPPORT FOR COBOL 5.1 Version 8.5 of CA Intertest Batch does not support Cobol 5.1 CA Intertest Batch will not work with programs compiled with COBOL 5.1 Unable to use CA Intertest Batch with programs compiled with COBOL 5.1 None. PRODUCT(S) AFFECTED: CA Intertest Batch Release 8.5 INTBAT 898 Copyright (C) 2013 CA. All rights reserved. R00137-EJ6850-SP1 DESC(SUPPORT FOR COBOL 5.1). PRE ( RO16663 RO33671 RO43299 RO61204 ) SUP ( RO15801 RO15824 RO17279 RO21376 RO48784 RO63456 TR15801 TR15824 TR17279 TR21376 TR48784 TR60257 TR60576 TR60991 TR60992 TR62176 TR62192 TR62274 TR63456 TR63533 T13D527 )

7 CA InterTest Batch CA RS PTF RO RO64155 RO64155 M.C.S. ENTRIES = ++PTF (RO64155) GUI HANGS WITH LARGE NUMBERS OF BREAKPOINTS The InterTest GUI (CUI) can hang intermittently if a large number of breakpoints are specified. After pressing the Debug icon for a selected program, causing the associated batch job to be submitted on the mainframe, no breakpoint interrupts will occur in the GUI even though the monitored job is running on the mainframe. Trying to perform another GUI function, such as pressing the Stop button, can cause the GUI to hang and have to be cancelled. Limits the usability of the InterTest GUI, since users can only use a small total number of breakpoints. Cancel and restart the GUI. Cancel the monitored mainframe job. Remove some of the breakpoints in the program and try again. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 917 Copyright (C) 2014 CA. All rights reserved. R00140-EJ6850-SP1 DESC(GUI HANGS WITH LARGE NUMBERS OF BREAKPOINTS). PRE ( RO43299 ) SUP ( TR64155 )

8 CA InterTest Batch CA RS PTF RO RO64350 RO64350 M.C.S. ENTRIES = ++PTF (RO64350) S0C4 ABEND OCCURS WHEN DEBUGGING COBOL PROGRAM WITH XML VERB User experience a S0C4 abend when debugging a COBOL IMS MPP program with XML verbs. S0C4 abend in CA InterTest batch. Users will not be able to debug COBOL IMS MPP programs with XML verbs. None. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 918 Copyright (C) 2013 CA. All rights reserved. R00141-EJ6850-SP1 DESC(S0C4 ABEND OCCURS WHEN DEBUGGING COBOL PROGRAM WITH XML VERB). PRE ( RO61204 ) SUP ( TR64350 )

9 CA InterTest Batch CA RS PTF RO RO64748 RO64748 M.C.S. ENTRIES = ++PTF (RO64748) PERFORMANCE PROBLEMS MONITORING IN-LINE PERFORM STATEMENTS Performance problems may occur when monitoring programs that contain in-line PERFORM statements. The monitoring session may appear to hang, or CA InterTest Batch may run out of virtual storage. 1. The monitoring session may appear to hang 2. CA InterTest Batch may run out of virtual storage Users may not be able to debug programs that contain in-line PERFORM statements. None. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 920 Copyright (C) 2014 CA. All rights reserved. R00143-EJ6850-SP1 DESC(PERFORMANCE PROBLEMS MONITORING IN-LINE PERFORM STATEMENTS). PRE ( RO16663 RO33671 RO43299 RO63533 ) SUP ( RO17279 TR17279 TR60257 TR64748 )

10 CA InterTest Batch CA RS PTF RO RO65018 RO65018 M.C.S. ENTRIES = ++PTF (RO65018) BATCH LINK INITIAL INTERCEPT LISTING SHOWS COMPILE OPTION When debugging an IMS BMP application using Batch Link, the listing is positioned at the compile options for the *INITIAL* Intercept, instead of at the first verb. The error occurs when the PSB name is the same as the monitored program and the Language Environment option ALL31 is set to OFF. The listing is incorrectly prositioned for the *INITIAL* Intercept. Debugging is made more difficult. Debug the application in foreground or rename the PSB. PRODUCT(S) AFFECTED: CA InterTest Batch MVS Release 8.5 INTBAT 897 Copyright (C) 2014 CA. All rights reserved. R00146-EJ6850-SP1 DESC(BATCH LINK INITIAL INTERCEPT LISTING SHOWS COMPILE OPTION). PRE ( RO12245 RO15344 RO16663 RO26750 RO36977 RO41917 RO48373 RO61204 RO61537 ) SUP ( RO17058 RO18278 RO21581 RO25454 RO29477 RO33937 RO36785 RO47327 RO48572 RO61098 RO61934 RO63317 TR17058 TR18278 TR21581 TR25454 TR29477 TR33937 TR36785 TR43378 TR46998 TR47327 TR47660 TR48572 TR58185 TR60710 TR60712 TR61098 TR61934 TR63317 TR65018 T13D499 T13D547 T13D549 )

11 CA InterTest Batch CA RS PTF RO RO65123 RO65123 M.C.S. ENTRIES = ++PTF (RO65123) JCL CONVERSION ERROR WHEN PARM IS 63 CHARACTERS LONG The PARM card for the converted job step is not converted correctly when the parameter is 63 characters long. The ending apostrophe and the comma which is supposed to follow the parameter are both missing. The following JCL errors may occur when the converted JCL is submitted: IEFC621I EXPECTED CONTINUATION NOT RECEIVED IEFC605I UNIDENTIFIED OPERATION FIELD A JCL error will occur when the converted JCL is submitted. Correct the PARM on the converted step before submitting the JCL. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 916 Copyright (C) 2014 CA. All rights reserved. R00147-EJ6850-SP1 DESC(JCL CONVERSION ERROR WHEN PARM IS 63 CHARACTERS LONG). PRE ( RO17010 RO21358 RO28561 RO50219 ) SUP ( RO37152 RO58263 RO64005 TR24052 TR26618 TR34208 TR37152 TR47803 TR49583 TR58263 TR64005 TR65123 )

12 CA InterTest Batch CA RS PTF RO RO65187 RO65187 M.C.S. ENTRIES = ++PTF (RO65187) 0C4 ABEND AFTER SIMULATING BAKR, PR INSTRUCTIONS IN AMODE 64 S0C4 abend after BAKR and PR instructions are simulated in AMODE 64. S0C4 abend. An 0C4 abend may occur when debugging AMODE 64 applications that contain BAKR and PR instructions. None. PRODUCT(S) AFFECTED: CA INTERTEST BATCH Release 8.5 INTBAT 922 Copyright (C) 2014 CA. All rights reserved. R00148-EJ6850-SP1 DESC(0C4 ABEND AFTER SIMULATING BAKR, PR INSTRUCTIONS IN AMODE 64). PRE ( RO26750 RO36977 RO65018 ) SUP ( RO18278 RO21581 RO25454 RO61934 TR18278 TR21581 TR25454 TR58185 TR61934 TR65187 )

13 CA InterTest Batch CA RS PTF RO RO65605 RO65605 M.C.S. ENTRIES = ++PTF (RO65605) PROC OVERRIDE MISSING FROM CONVERTED JCL JCL keyword overrides (such as COND) are ignored when specified on an EXEC statement that calls a procedure, if no procedure step name qualifier is specified. The following keyword overrides are not included on all steps in the called procedure: ACCT, ADDRSPC, COND, DYNAMNBR, PERFORM, RD, REGION The converted JCL may not execute the same as the original JCL. Add the missing keyword override to the JCL after conversion. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 923 Copyright (C) 2014 CA. All rights reserved. R00149-EJ6850-SP1 DESC(PROC OVERRIDE MISSING FROM CONVERTED JCL). PRE ( RO17010 RO21358 RO28561 RO50219 ) SUP ( RO37152 RO58263 RO64005 RO65123 TR24052 TR26618 TR34208 TR37152 TR47803 TR49583 TR58263 TR64005 TR65123 TR65605 )

14 CA InterTest Batch CA RS PTF RO RO65671 RO65671 M.C.S. ENTRIES = ++PTF (RO65671) S0C4 ABEND IN CAMRTPC WHEN SIMULATING ESTAEX RESET S0C4 abend in CAMRTPC when simulating an ESTAEX macro which resets an ESTAE (i.e. ESTAEX 0). If the application is running under IMS, the S0C4 will be followed by a U2480 abend. S0C4 abend in CAMRTPC. The abending application can't be debugged. None. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 924 Copyright (C) 2014 CA. All rights reserved. R00150-EJ6850-SP1 DESC(S0C4 ABEND IN CAMRTPC WHEN SIMULATING ESTAEX RESET). SUP ( RO48949 TR48949 TR65671 )

15 CA InterTest Batch CA RS PTF RO RO65996 RO65996 M.C.S. ENTRIES = ++PTF (RO65996) SCROLLING ERRORS WHEN SCREEN LONGER THAN 43 ROWS Scrolling errors will occur when the scroll value is PAGE and the screen size is longer than 43 rows. When scrolling UP or DOWN by PAGE, the display will scroll more than 43 rows, even though only 43 rows are shown on the screen. Some lines of the display will not be shown when scrolling by PAGE. Adjust the screen size to use a maximum of 43 rows. Alternatively, scroll UP and DOWN by cursor, HALF, or a specific number of lines, instead of using full page scrolling. PRODUCT(S) AFFECTED: CA-INTERTEST/BATCH-MVS Release 8.5 INTBAT 926 Copyright (C) 2014 CA. All rights reserved. R00152-EJ6850-SP1 DESC(SCROLLING ERRORS WHEN SCREEN LONGER THAN 43 ROWS). PRE ( RO50219 RO61204 RO63533 ) SUP ( RO15801 RO15824 RO48784 TR15801 TR15824 TR48784 TR65996 T13D527 )

16 CA InterTest Batch CA RS PTF RO RO67663 RO67663 M.C.S. ENTRIES = ++PTF (RO67663) SUPPORT SYSPLEX DEBUGGING Debugging an application from a remote LPAR within a sysplex is not possible with the current release of InterTest Batch. Programs waiting in the IntBat BLQ are not visible or debugable except from LPAR they were submitted from. A program can only be debugged from the LPAR it is executing on. NONE INTBAT 905 Copyright (C) 2014 CA. All rights reserved. R00158-EJ6850-SP1 DESC(SUPPORT SYSPLEX DEBUGGING). PRE ( RO15344 RO29400 RO29707 RO33671 RO36974 RO41917 RO43299 RO48373 RO61204 RO61537 RO65996 ) SUP ( RO15846 RO15866 RO16068 RO20368 RO22441 RO24188 RO34740 RO64155 RO64350 TR15846 TR15866 TR16068 TR20368 TR22441 TR24188 TR34740 TR56552 TR64155 TR64350 TR64513 TR67663 T13D529 T13D539 ) ++HOLD (RO67663) SYSTEM FMID(CMR8500) REASON (ACTION ) DATE (14071) COMMENT ( CA-INTERTEST/BATCH-MVS Release 8.5 SEQUENCE AFTER APPLY PURPOSE Enable cross SYSPLEX debugging in InterTest Batch r8.5 USERS All users. AFFECTED KNOWLEDGE SMP/E REQUIRED ACCESS SMP/E REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. This PTF requires FMID CVH8501 be installed, and for PTFs TR67666/RO67666 & TR67667/RO67667 to be applied. These will update the CA InterTest Batch server to enable SYSPLEX support, and provide an update to the CA InterTest Batch GUI. 2. CAMRUSR1 is the user exit that determines if a user is authorized to select a Batch Link job for debugging. The parameter list passed to it has been updated in this PTF to include the System ID that a job is running on. To be able to use this new parameter, reassemble CAMRUSR1. 3. If CAIOPTN member CAMRSTBZ has been previously updated and applied using the USERMOD as described in section 'Define the Batch Link Scheduling Table' of the Installation Guide, it must be restored before applying this PTF.

17 CA InterTest Batch CA RS PTF RO The InterTest Batch option table CAMRSTBZ must be changed to indicate SYSPLEX=Y and reassembled to activate SYSPLEX debugging support. If an update to the size of the table is required, follow the instructions as described in section 'Define the Batch Link Scheduling Table' of the Installation Guide. 5. CA InterTest Batch must be re-initialized. To re-initialize, run MR85INIT or CAIRIM, ensuring the CAILIB with the applied PTF is first in the concatenation. 6. A CA InterTest server must be running on each LPAR in the SYSPLEX for this feature to function properly. ).

18 CA InterTest Batch CA RS PTF RO RO67666 RO67666 M.C.S. ENTRIES = ++PTF (RO67666) INTERTEST GUI SYSPLEX SUPPORT Currently, a user of the CA InterTest GUI must have multiple servers defined to find jobs in the Batch Link Queue when they are running on different systems. The user must also add schedules using different servers if they would like the schedule tables for multiple systems to be in synch. This enhancement will enable the user to schedule using one defined server and have it propagate to other systems. The user will also be able to view and select jobs from the Batch Link Queue even if they are running on a different system. A single server can only be used to debug/schedule on a single system. The user will have to add schedules to multiple systems if he does not know which system a transaction will run on. The user will have to look up the Batch Link Queue on multiple systems to find a suspended job. Use multiple servers. PRODUCT(S) AFFECTED: Testing & Fault Mgmt Tools Common Sym Release 8.5 Testing & Fault Mgmt Tools Common Sym Release 8.5 TFMSYM 322 NO INITIAL BP IN GUI AFTER RESUME FROM AUTO BP A user can not continue debugging a batch job from the CA InterTest GUI if it was suspended at an Automatic Breakpoint of an Attention Breakpoint. When a job is SUSPENDED at an Automatic Breakpoint (due to an abending statement) or an Attention Breakpoint (due to using the ATTN key) and picked up from the batch link queue of the InterTest GUI, the user receives message "Debug session has ended before any monitored programs were entered" followed by the automatic breakpoint description. The job then ends without debugging. Batch link jobs will be lost if suspended at an automatic breakpoint and then resumed in the InterTest GUI. 1) User can take a single step when at an automatic breakpoint before suspending the job. This will allow the user to resume normally from the GUI. 2) User can debug using the ISPF environment. PRODUCT(S) AFFECTED: Testing & Fault Mgmt Tools Common Sym Release 8.5 TFMSYM 323 Copyright (C) 2014 CA. All rights reserved. R00095-AVH850-SP1 DESC(INTERTEST GUI SYSPLEX SUPPORT). FMID (CVH8500) SUP ( TR64478 TR67666 ) ++IF FMID(CVH8501) REQ( RO67667). ++HOLD (RO67666) SYSTEM FMID(CVH8500) REASON (ACTION ) DATE (14076) COMMENT ( Testing & Fault Mgmt Tools Common Sym C Release 8.5 SEQUENCE AFTER APPLY PURPOSE Update CA-InterTest Server

19 CA InterTest Batch CA RS PTF RO67666 USERS All users. AFFECTED KNOWLEDGE SMP/E and OMVS commands REQUIRED ACCESS OMVS REQUIRED ************************** * STEPS TO PERFORM * ************************** After application, set the permissions to 777 by issuing chmod 777 intertest_service chmod 777 intertest.jar chmod 777 cavhso31.so chmod 777 cavhso64.so If your site uses PROGRAM CONTROL on the InterTest STEPLIB then these files need to have the equivalent USS extended attribute set. The command to do this is restricted and may need to be executed by a system administrator. This command should be executed in a USS session. extattr +p /u/users/intertest/bin/intertest_services extattr +p /u/users/intertest/bin/intertest.jar extattr +p /u/users/intertest/bin/cavhso31.so extattr +p /u/users/intertest/bin/cavhso64.so This command MUST be executed whenever the file is replaced. This attribute is not needed unless your STEPLIB is PROGRAM CONTROLLED but setting it will do no harm. ).

20 CA InterTest Batch CA RS PTF RO RO67667 RO67667 M.C.S. ENTRIES = ++PTF (RO67667) INTERTEST GUI SYSPLEX SUPPORT Currently, a user of the CA InterTest GUI must have multiple servers defined to find jobs in the Batch Link Queue when they are running on different systems. The user must also add schedules using different servers if they would like the schedule tables for multiple systems to be in synch. This enhancement will enable the user to schedule using one defined server and have it propagate to other systems. The user will also be able to view and select jobs from the Batch Link Queue even if they are running on a different system. A single server can only be used to debug/schedule on a single system. The user will have to add schedules to multiple systems if he does not know which system a transaction will run on. The user will have to look up the Batch Link Queue on multiple systems to find a suspended job. Use multiple servers. PRODUCT(S) AFFECTED: Testing & Fault Mgmt Tools Common Sym Release 8.5 Testing & Fault Mgmt Tools Common Sym Release 8.5 TFMSYM 322 NO INITIAL BP IN GUI AFTER RESUME FROM AUTO BP A user can not continue debugging a batch job from the CA InterTest GUI if it was suspended at an Automatic Breakpoint of an Attention Breakpoint. When a job is SUSPENDED at an Automatic Breakpoint (due to an abending statement) or an Attention Breakpoint (due to using the ATTN key) and picked up from the batch link queue of the InterTest GUI, the user receives message "Debug session has ended before any monitored programs were entered" followed by the automatic breakpoint description. The job then ends without debugging. Batch link jobs will be lost if suspended at an automatic breakpoint and then resumed in the InterTest GUI. 1) User can take a single step when at an automatic breakpoint before suspending the job. This will allow the user to resume normally from the GUI. 2) User can debug using the ISPF environment. PRODUCT(S) AFFECTED: Testing & Fault Mgmt Tools Common Sym Release 8.5 TFMSYM 323 Copyright (C) 2014 CA. All rights reserved. R00095-AVH850-SP1 DESC(INTERTEST GUI SYSPLEX SUPPORT). FMID (CVH8501) PRE ( RO16153 RO23713 RO61424 ) SUP ( RO26556 RO28014 RO41468 RO50589 RO56482 RO63174 TR26556 TR27936 TR28014 TR41468 TR50589 TR56482 TR63174 TR64479 TR67667 ) ++IF FMID(CVH8500) REQ( RO67666). ++HOLD (RO67667) SYSTEM FMID(CVH8501) REASON (ACTION ) DATE (14076) COMMENT ( Testing & Fault Mgmt Tools Common Sym C Release 8.5 SEQUENCE AFTER APPLY

21 CA InterTest Batch CA RS PTF RO67667 PURPOSE Update CA-InterTest Server USERS All users. AFFECTED KNOWLEDGE SMP/E and OMVS commands REQUIRED ACCESS OMVS REQUIRED ************************** * STEPS TO PERFORM * ************************** 1. This PTF requires FMID CMR8500 be installed, and for PTF TR67663/RO67663 to be applied. 2. After application, set the permissions to 777 by issuing chmod 777 intertest_service chmod 777 intertest.jar chmod 777 cavhso31.so chmod 777 cavhso64.so 3. If your site uses PROGRAM CONTROL on the InterTest STEPLIB then these files need to have the equivalent USS extended attribute set. The command to do this is restricted and may need to be executed by a system administrator. This command should be executed in a USS session. extattr +p /u/users/intertest/bin/intertest_services extattr +p /u/users/intertest/bin/intertest.jar extattr +p /u/users/intertest/bin/cavhso31.so extattr +p /u/users/intertest/bin/cavhso64.so This command MUST be executed whenever the file is replaced. This attribute is not needed unless your STEPLIB is PROGRAM CONTROLLED but setting it will do no harm. ). BINARY LINK('intertest.jar') PARM(PATHMODE(0,7,5,5)). BINARY LINK('intertest_service') PARM(PATHMODE(0,7,5,5)). BINARY LINK('cavhso31.so') PARM(PATHMODE(0,7,5,5)). BINARY LINK('cavhso64.so') PARM(PATHMODE(0,7,5,5)). BINARY LINK('updatesite.zip') PARM(PATHMODE(0,7,5,5)).