Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries. Introduction. Nigel Atkinson ANSYS UK Ltd
|
|
- Buddy Waters
- 5 years ago
- Views:
Transcription
1 Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries Introduction Nigel Atkinson ANSYS UK Ltd 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
2 Invitation Engineers and naval architects involved in the offshore, marine and wave/tidal renewable energy industries are increasing their use of engineering simulation tools from ANSYS to assess: Motion and loading of floating offshore devices and structures Structural integrity and durability Wave device and tidal turbine hydraulic performance Tidal turbine farm layouts and wake-effects Added mass and damping Vortex-induced-vibrations and fluid-structure-interactions The seminar will feature an introduction to the ANSYS product suite followed by technical presentations on the capabilities of ANSYS Fluid Dynamics and Structural Mechanics software of relevance to these applications ANSYS, Inc. All rights reserved. 2 ANSYS, Inc. Proprietary
3 Today s agenda Registration and Coffee Introduction and Welcome Nigel Atkinson, ANSYS UK AGENDA Coffee Break Technical Presentations - AQWA for Multi-Body Hydrodynamics and Motion Analysis including Moorings Richard May, ANSYS UK - ANSYS Structural Mechanics for Global & Local analyses Dr. Steven Varnam, ANSYS UK Technical Presentations - Viscous CFD - Summary of Fluid-Structure-Interaction and Coupled Analysis Capabilities Dr. Phil Stopford, ANSYS UK Summary and Q&A Lunch and Ask the Experts 2010 ANSYS, Inc. All rights reserved. 3 ANSYS, Inc. Proprietary
4 ANSYS, The Company ANSYS are the world s largest CAE Company We design, develop, market and globally support a wide range of Engineering simulation software Over 1600 people worldwide, Over 150 in the UK A suite of multi-purpose software technologies for Structural Mechanics Fluid Dynamics Heat Transfer Electronics Electromagnetics Multiphysics 2010 ANSYS, Inc. All rights reserved. 4 ANSYS, Inc. Proprietary
5 Simulation Driven Product Development Instead of just using engineering simulation for verification or trouble-shooting, many companies are turning to Simulation Driven Product Development (SDPD) Design, simulate, optimize Physically test only the best candidates The benefits of SDPD Better performing products Shorter development times Reduced development costs 10X 100X Productivity Gain Customer needs Business drivers Technology trends 2010 ANSYS, Inc. All rights reserved. 5 ANSYS, Inc. Proprietary
6 ANSYS Offshore Heritage Software simulation tools relevant to today Hydrodynamic diffraction/radiation AQWA Structural Mechanics ASAS (offshore-specific FEA) ANSYS Mechanical (generic implicit FEA) AUTODYN (generic explicit FEA) Viscous Computational Fluid Dynamics CFX FLUENT Courtesy of Xanthus Energy 2010 ANSYS, Inc. All rights reserved. 6 Courtesy ANSYS, Inc. of TU Proprietary Nord EV
7 Today s Objectives Through this seminar we hope to demonstrate how each of these various simulation tools are extremely useful in addressing specific questions In addition we want to introduce how these tools, when coupled together, open up further possibilities to provide additional fidelity by including more physics into the engineering simulation To facilitate our customers to perform coupled simulations using the various ANSYS software, we have developed a framework called Workbench 2010 ANSYS, Inc. All rights reserved. 7 ANSYS, Inc. Proprietary
8 Tomorrow s Framework As well as providing a means of integrating the different physics, ANSYS Workbench provides a common look-and-feel across the range Engineers familiar with one package will soon progress with another Common tasks use common tools DesignModeler for creating geometry CAD Interfaces HPC for running solutions in parallel 2010 ANSYS, Inc. All rights reserved. 8 ANSYS, Inc. Proprietary
9 Workbench Workbench is a project environment that offers process chaining, management and scripting 2010 ANSYS, Inc. All rights reserved. 9 ANSYS, Inc. Proprietary
10 Parametric By Design Parameter definition in Mechanical Simulation (implicit, explicit, MBD) Input parameter created from an expression in ANSYS CFX Parameter definition based on linked Microsoft Excel cells Parameter definition based on ANSYS Mechanical APDL input files Output parameters created from an expression in ANSYS CFD-Post Input parameter created from an expression in ANSYS FLUENT 2010 ANSYS, Inc. All rights reserved. 10 ANSYS, Inc. Proprietary
11 Six-Sigma & Optimisation ANSYS DesignXplorer is a tool that provides all necessary tools for Design exploration: Response surfaces Six-Sigma analysis Optimization techniques ANSYS DesignXplorer is fully embedded in ANSYS Workbench and works from the parameter set definition, regardless of the complexity of the simulation 2010 ANSYS, Inc. All rights reserved. 11 ANSYS, Inc. Proprietary
12 Today s agenda Registration and Coffee Introduction and Welcome Nigel Atkinson, ANSYS UK AGENDA Coffee Break Technical Presentations - AQWA for Multi-Body Hydrodynamics and Motion Analysis including Moorings Richard May, ANSYS UK - Structural Mechanics Dr. Steven Varnam, ANSYS UK Technical Presentations - Viscous CFD - Summary of Fluid-Structure-Interaction and Coupled Analysis Capabilities Dr. Phil Stopford, ANSYS UK Summary and Q&A Lunch and Ask the Experts 2010 ANSYS, Inc. All rights reserved. 12 ANSYS, Inc. Proprietary
Advanced Applications of Fluid Dynamics and Structural Mechanics Simulation in the Upstream Oil and Gas Industry. Introduction
Advanced Applications of Fluid Dynamics and Structural Mechanics Simulation in the Upstream Oil and Gas Industry Introduction Gavin Butcher Account Manager ANSYS UK Ltd 2010 ANSYS, Inc. All rights reserved.
More informationEngineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries. Viscous CFD Applications. Phil Stopford ANSYS UK
Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries Viscous CFD Applications Phil Stopford ANSYS UK 2011 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
More informationSpeed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
More informationANSYS Fluid Structure Interaction for Thermal Management and Aeroelasticity
ANSYS Fluid Structure Interaction for Thermal Management and Aeroelasticity Phil Stopford Duxford Air Museum 11th May 2011 2011 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Fluid Structure
More informationANSYS - Workbench Overview. From zero to results. AGH 2014 April, 2014 W0-1
ANSYS - Workbench Overview From zero to results 2014 W0-1 Runing ANSYS WEiP ANSYS We are going to work in most advanced ANSYS Workbench W0-2 ANSYS Workbench WEiP What is Workbench? Platform for integration
More informationTENDER FOR PURCHASE OF LICENSES OF FINITE ELEMENT ANALYSIS PROGRAM SPECIFICATIONS
TENDER FOR PURCHASE OF LICENSES OF FINITE ELEMENT ANALYSIS PROGRAM SPECIFICATIONS 1. OVERVIEW 1.1. These specifications identify the minimum requirements for the Licenses of two Finite Element Analysis
More informationSeminar June Structural Mechanics. Steve Varnam ANSYS UK
Seminar June 14 2011 Engineering Simulation Software for the Offshore, Marine and Wave/Tidal Renewable Energy Industries Structural Mechanics Steve Varnam ANSYS UK 2010 ANSYS, Inc. All rights reserved.
More informationIntroduction to ANSYS DesignXplorer
Overview 14. 5 Release Introduction to ANSYS DesignXplorer 1 2013 ANSYS, Inc. September 27, 2013 What is DesignXplorer? DesignXplorer (DX) is a tool that uses response surfaces and direct optimization
More informationMay 11, ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary Inventory #
Chapter 1 ANSYS DesignModeler Introduction to Workbench 1-1 ANSYS Workbench Overview ANSYS Workbench comprises the following modules: Simulation for performing structural and thermal analyses using the
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions HPC What is new at CAEA GPU 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints,
More information2008 International ANSYS Conference
2008 International ANSYS Conference Simulation Driven Product Development using ANSYS Technology Padmesh Mandloi Rahul Kumar Samir Kadam 2008 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
More informationoptislang recent developments
optislang recent developments WOST 11 06. 07.11.2013 Dynardo GmbH 2014 optislang 4.2 version 4.1.0 Nov. 13 (WOST) version 4.1.1 Dec. 13 (WB15) version 4.1.2 Apr. 14 version 4.1.3 Jul. 14 More than 1500
More informationIntroduction to Workbench Scripting & Customization ANSYS, Inc. November 29, 2012
Introduction to Workbench Scripting & Customization 1 Outline Understanding the Workbench framework WB Journaling and Scripting Different Customization Methods Conclusion 2 Workbench Framework Application
More information3-D Design Flow Automation for HFSS. Jim DeLap Technical Manager
3-D Design Flow Automation for HFSS Jim DeLap Technical Manager jim.delap@ansys.com 1 Motivation Existing methods of defining 3D models within HFSS have been sufficient since the introduction of the product
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions What is new at CAEA 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints, contact,
More informationSimulation and Optimization in the wind energy industry
Simulation and Optimization in the wind energy industry Numerical Simulation & Optimization www.ozeninc.com/optimization optimization@ozeninc.com Summary Why to use numerical simulations and optimization?
More informationAutomotive Fluid-Structure Interaction (FSI) Concepts, Solutions and Applications. Laz Foley, ANSYS Inc.
Automotive Fluid-Structure Interaction (FSI) Concepts, Solutions and Applications Laz Foley, ANSYS Inc. Outline FSI Classifications FSI Solutions FSI Modeling Approaches ANSYS Workbench for FSI System
More informationParametric. Practices. Patrick Cunningham. CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved.
Parametric Modeling Best Practices Patrick Cunningham July, 2012 CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. E-Learning Webinar Series This
More informationCFD FOR OFFSHORE APPLICATIONS USING REFRESCO. Arjen Koop - Senior Project Manager Offshore MARIN
CFD FOR OFFSHORE APPLICATIONS USING REFRESCO Arjen Koop - Senior Project Manager Offshore MARIN COMPUTATIONAL FLUID DYNAMICS (CFD) Advantages: Quantitative predictions Detailed insight in physical processes
More informationDesign Exploration and Robust Design. Judd Kaiser Product Manager, ANSYS Workbench Platform
Design Exploration and Robust Design Judd Kaiser Product Manager, ANSYS Workbench Platform 1 Agenda 2 What is Robust Design? At ANSYS Workbench Principles DesignXplorer ANSYS Vision What is Robust Design?
More informationCommercial Implementations of Optimization Software and its Application to Fluid Dynamics Problems
Commercial Implementations of Optimization Software and its Application to Fluid Dynamics Problems Szymon Buhajczuk, M.A.Sc SimuTech Group Toronto Fields Institute Optimization Seminar December 6, 2011
More informationGITAM. Skill Development Centre. Computer Aided Engineering UNIVERSITY H Y D E R A B A D. (Estd.u/s 3 of the UGC, 1956)
GITAM Skill Development Centre Computer Aided Engineering A University Committed to Excellence Modeling and Analysis Software tools Creo (Pro/ENGINEER) : Creo is a powerful 3D CAD solutions package optimized
More informationRealize Your Product Promise. Icepak
Realize Your Product Promise Icepak ANSYS Icepak delivers powerful technology for electronics thermal management. Simulating high-performance electronics cooling readily solves challenges in this rapidly
More informationANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd.
ANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd. 1 ANSYS Workbench Platform The most comprehensive platform for Multiphysics Simulations ANSYS Workbench Framework ANSYS DesignXplorer ANSYS
More informationWebinar optislang & ANSYS Workbench. Dynardo GmbH
Webinar optislang & ANSYS Workbench Dynardo GmbH 1 1. Introduction 2. Process Integration and variation studies 6. Signal Processing 5. ANSYS Mechanical APDL in optislang 3. optislang inside ANSYS 4. ANSYS
More informationWB Journaling & Scripting Overview
WB Journaling & Scripting Overview 1 Automatically Record Journals Enable automatic recording Tools -> Options -> Journals and Logs 2 Manually Record Journal 1 2 3 4 Do the operations 3 Edit Journal 4
More information2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Bi-directional Automatic Electromagnetic-Thermal Coupling for HEV/EV Traction Motor Design Using Maxwell and ANSYS Mechanical Peng Yuan Eric Lin Zed (Zhangjun) Tang ANSYS, Inc. 2010 ANSYS, Inc. All rights
More informationMRI Induced Heating of a Pacemaker. Peter Krenz, Application Engineer
MRI Induced Heating of a Pacemaker Peter Krenz, Application Engineer 1 Problem Statement Electric fields generated during MRI exposure are dissipated in tissue of the human body resulting in a temperature
More informationANSYS AIM 16.0 Overview. AIM Program Management
1 2015 ANSYS, Inc. September 27, 2015 ANSYS AIM 16.0 Overview AIM Program Management 2 2015 ANSYS, Inc. September 27, 2015 Today s Simulation Challenges Leveraging simulation across engineering organizations
More informationFuture Trends Part - 1 A New CAD & CAE AIES Ltd
Future Trends Part - 1 A New CAD & CAE Process @ AIES Ltd Dr Ian McLuckie April 2016 ian.mcluckie@aiesl.co.uk 1 Future Trends - CAD & CAE There is a lot of discussion about how we need bigger and faster
More informationThank you for downloading one of our ANSYS whitepapers we hope you enjoy it.
Thank you! Thank you for downloading one of our ANSYS whitepapers we hope you enjoy it. Have questions? Need more information? Please don t hesitate to contact us! We have plenty more where this came from.
More informationOcean Energy Europe 2017
Ocean Energy Europe 2017 Kieran O Brien Executive Director Carnegie Clean Energy Commercial in Confidence & Copyright Carnegie Clean Energy Limited 2017 DISCLAIMER The information contained herein has
More informationCFD Analysis of a Novel Hull Design for an Offshore Wind Farm Service Vessel
CFD Analysis of a Novel Hull Design for an Offshore Wind Farm Service Vessel M. Shanley 1, J. Murphy 1, and P. Molloy 2 1 Hydraulics and Maritime, Civil and Environmental Engineering University College
More informationAQWA User Manual. 275 Technology Drive Canonsburg, PA (T) (F)
AQWA User Manual ANSYS, Inc. Southpointe 275 Technology Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 14.5 October 2012 ANSYS, Inc. is certified
More informationRecent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering.
Recent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering. 19 0 Seminario International de Alta Tecnologia 09 OUT 2014 TEATRO UNIMEP Campus Taquaral Piracicaba SP
More informationANSYS Workbench for Process Compression and Scalability. Jiaping Zhang, Technical Service Engineer, Ansys Inc. Houston Office
ANSYS Workbench for Process Compression and Scalability Jiaping Zhang, Technical Service Engineer, Ansys Inc. Houston Office Jiaping.Zhang@Ansys.com 1 Agenda 1. Ansys Workbench & Mechanical: An Introduction
More informationFluid structure interaction analysis: vortex shedding induced vibrations
Fluid structure interaction analysis: vortex shedding induced vibrations N. Di Domenico, M. E. * University of Rome «Tor Vergata», Department of Enterprise Engineering «Mario Lucertini» A. Wade, T. Berg,
More informationMarine Hydrodynamics Solver in OpenFOAM
Marine Hydrodynamics Solver in OpenFOAM p. 1/14 Marine Hydrodynamics Solver in OpenFOAM Hrvoje Jasak and Henrik Rusche h.jasak@wikki.co.uk, h.rusche@wikki.co.uk Wikki, United Kingdom and Germany 4 December
More informationANSYS FLUENT GUIDE viviso.com ANSYS FLUENT GUIDE. page 1 / 7
page 1 / 7 page 2 / 7 ansys fluent guide pdf FLUENT User's Guide contains detailed information about using FLUENT, including information about the user interface, reading and writing files, defining boundary
More informationANSYS High. Computing. User Group CAE Associates
ANSYS High Performance Computing User Group 010 010 CAE Associates Parallel Processing in ANSYS ANSYS offers two parallel processing methods: Shared-memory ANSYS: Shared-memory ANSYS uses the sharedmemory
More informationANSYS/LS-Dyna. Workbench Using. Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, CAE Associates
ANSYS/LS-Dyna Customization in Workbench Using ACT Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, 2013 2013 CAE Associates CAE Associates CAE Associates is an engineering services
More information2008 International ANSYS Conference
2008 International ANSYS Conference FEM AND FSI SIMULATIONS OF IMPACT LOADS ON GRP SUBSEA COMPOSITE COVERS Kjetil Rognlien, MSc Technical Consultant EDR AS, Norway 2008 ANSYS, Inc. All rights reserved.
More information2 nd Optimization & Stochastic Days India 2012
Report 2 nd Optimization & Stochastic Days India 2012 December 3 4, 2012 9:00 Registrations Agenda Day 1 Seminar 9:50 Welcome by CADFEM 10:00 KEYNOTE: Why Robust Design Optimization in Virtual Product
More informationR15.0 Structural Update
R15.0 Structural Update 1 Tim Pawlak R&D Fellow ANSYS Structural Update Topics Geometry and Mesh Material Behavior Numerical Methods Composites Dynamics Submodeling Multiphysics Solvers User Interface
More informationEvaluation of hydrodynamic coefficients on riser floaters using CFD
Evaluation of hydrodynamic coefficients on riser floaters using CFD Erico Santos, Pedro Mendes, Bruno Luna PETROBRAS (CENPES/PDEP/TDUT) Ricardo Damian ESSS AGENDA MOTIVATION PROCEADURE OVERVIEW RISER GLOBAL
More informationHPC and IT Issues Session Agenda. Deployment of Simulation (Trends and Issues Impacting IT) Mapping HPC to Performance (Scaling, Technology Advances)
HPC and IT Issues Session Agenda Deployment of Simulation (Trends and Issues Impacting IT) Discussion Mapping HPC to Performance (Scaling, Technology Advances) Discussion Optimizing IT for Remote Access
More informationOpen source software tools for powertrain optimisation
Open source software tools for powertrain optimisation Paolo Geremia Eugene de Villiers TWO-DAY MEETING ON INTERNAL COMBUSTION ENGINE SIMULATIONS USING OPENFOAM TECHNOLOGY 11-12 July, 2011 info@engys.eu
More informationRealize Your Product Promise. DesignerRF
Realize Your Product Promise DesignerRF Four-element antenna array showing current distribution and far-field gain, created in DesignerRF using layout editor and solved via HFSS with Solver on Demand technology
More informationTopology Optimization in Fluid Dynamics
A Methodology for Topology Optimization in Fluid Dynamics 1 Chris Cowan Ozen Engineering, Inc. 1210 E. Arques Ave, Suite 207 Sunnyvale, CA 94085 info@ozeninc.com Ozen Engineering Inc. We are your local
More informationNumerical Estimation and Validation of Shallow Draft Effect on Roll Damping
The 14 th International Ship Stability Workshop (ISSW), 29 th September- 1 st October 2014, Kuala Lumpur, Malaysia Numerical Estimation and Validation of Shallow Draft Effect on Roll Damping Toru Katayama
More information2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube
2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube Daniel L. Cler, US Army RDECOM/ ARDEC/ WSEC/ Benet Labs 1 Overview Background Problem
More informationAuto Injector Syringe. A Fluent Dynamic Mesh 1DOF Tutorial
Auto Injector Syringe A Fluent Dynamic Mesh 1DOF Tutorial 1 2015 ANSYS, Inc. June 26, 2015 Prerequisites This tutorial is written with the assumption that You have attended the Introduction to ANSYS Fluent
More informationAnswers to Webinar "Wind farm flow modelling using CFD update" Q&A session
Answers to Webinar "Wind farm flow modelling using CFD - 2012 update" Q&A session Christiane Montavon, Ian Jones Physics related Q: Should the roughness map be scaled from the normal WAsP map to the CFD
More informationComparison of model tests and calculations
Comparison of model tests and calculations Experimental Methods in Marine Hydrodynamics Lecture in week 45 Covers chapter 12 in the lecture notes 1 Contents Validation or verification? Numerical vs. Physical
More informationAnalysis of floating flexible fish cages with ORCAFLEX/PYTHON
Analysis of floating flexible fish cages with ORCAFLEX/PYTHON Short summary presentation, September 2017 @ SEMAR AS 2 SUMMARY Purpose of this presentation is to document analysis of floating flexible fish
More informationDYNARDO Dynardo GmbH CFD Examples. Dr.-Ing. Johannes Will President Dynardo GmbH
CFD Examples Dr.-Ing. Johannes Will President Dynardo GmbH 1 Flow Simulation of LCD Manufacturing Process Task: - Optimization the flow conditions at a LCD manufacturing process - Inputs: - lab geometry
More informationMesh Morphing and the Adjoint Solver in ANSYS R14.0. Simon Pereira Laz Foley
Mesh Morphing and the Adjoint Solver in ANSYS R14.0 Simon Pereira Laz Foley 1 Agenda Fluent Morphing-Optimization Feature RBF Morph with ANSYS DesignXplorer Adjoint Solver What does an adjoint solver do,
More informationUsing the Workbench LS-DYNA Extension
Using the Workbench LS-DYNA Extension ANSYS, Inc. Southpointe 2600 ANSYS Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 18.1 April 2017 ANSYS,
More informationANSYS EnSight. Advanced PostProcessing capabilities. Janos Szegletes
ANSYS EnSight Advanced PostProcessing capabilities Janos Szegletes 2018.05.03. www.econengineering.com1 Fluid Packages - Overview ANSYS CFD Premium ANSYS Ensight SpaceClaim 4 HPC DesignXplorer CFX Fluent
More informationSimulations with ANSYS. Sam Posen Cornell University Presented October 13 th 2010 at HOM10 In Ithaca, NY
Simulations with ANSYS Sam Posen Cornell University Presented October 13 th 2010 at HOM10 In Ithaca, NY ANSYS ANSYS is a finite element analysis package developed for engineering applications ANSYS recently
More informationSoftware Solutions for the Design and Simulation of Electric Machines. Dr. Markus Anders, CD-adapco
Software Solutions for the Design and Simulation of Electric Machines Dr. Markus Anders, CD-adapco Agenda Software for Electric Machine Design and Simulation: About SPEED SPEED& JMAG SPEED& STAR-CCM+,
More informationAppendix P. Multi-Physics Simulation Technology in NX. Christian Ruel (Maya Htt, Canada)
251 Appendix P Multi-Physics Simulation Technology in NX Christian Ruel (Maya Htt, Canada) 252 Multi-Physics Simulation Technology in NX Abstract As engineers increasingly rely on simulation models within
More informationAdvances in Turbomachinery Simulation Fred Mendonça and material prepared by Chad Custer, Turbomachinery Technology Specialist
Advances in Turbomachinery Simulation Fred Mendonça and material prepared by Chad Custer, Turbomachinery Technology Specialist Usage From Across the Industry Outline Key Application Objectives Conjugate
More informationFinite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench
Finite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench Course Curriculum (Duration: 120 Hrs.) Section I: ANSYS Mechanical APDL Chapter 1: Before you start using ANSYS a. Introduction to
More informationANSYS Customization. Mechanical and Mechanical APDL. Eric Stamper. Presented by CAE Associates
ANSYS Customization Mechanical and Mechanical APDL Presented by Eric Stamper 2011 CAE Associates Introduction CAE Associates Inc. Engineering consulting firm since 1981. ANSYS consulting, custom software
More informationWhy HPC for. ANSYS Mechanical and ANSYS CFD?
Why HPC for ANSYS Mechanical and ANSYS CFD? 1 HPC Defined High Performance Computing (HPC) at ANSYS: An ongoing effort designed to remove computing limitations from engineers who use computer aided engineering
More informationFluid-Structure Interaction in STAR-CCM+ Alan Mueller CD-adapco
Fluid-Structure Interaction in STAR-CCM+ Alan Mueller CD-adapco What is FSI? Air Interaction with a Flexible Structure What is FSI? Water/Air Interaction with a Structure Courtesy CFD Marine Courtesy Germanischer
More informationNUMERICAL COUPLING BETWEEN DEM (DISCRETE ELEMENT METHOD) AND FEA (FINITE ELEMENTS ANALYSIS).
NUMERICAL COUPLING BETWEEN DEM (DISCRETE ELEMENT METHOD) AND FEA (FINITE ELEMENTS ANALYSIS). Daniel Schiochet Nasato - ESSS Prof. Dr. José Roberto Nunhez Unicamp Dr. Nicolas Spogis - ESSS Fabiano Nunes
More informationHPC Visualization with EnSight
HPC Visualization with EnSight Beijing 2010.10.27 Aric Meyer Marketing Director, Asia & Pacific CEI Computational Engineering International, Inc. Founded in 1994 out of Cray Research Headquarters in Raleigh,
More informationRecent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering.
Recent Approaches of CAD / CAE Product Development. Tools, Innovations, Collaborative Engineering. Author: Dr.-Ing. Peter Binde Abstract: In this paper, the latest approaches in the field of CAD-CAE product
More informationOverview and Recent Developments of Dynamic Mesh Capabilities
Overview and Recent Developments of Dynamic Mesh Capabilities Henrik Rusche and Hrvoje Jasak h.rusche@wikki-gmbh.de and h.jasak@wikki.co.uk Wikki Gmbh, Germany Wikki Ltd, United Kingdom 6th OpenFOAM Workshop,
More informationGE Usage & Trends
CFD @ GE Usage & Trends Dr. Senior Principal Engineer GE Global Research 06 January 2018 Overview of CFD at GE Wide penetration Aviation, Power, Oil & Gas, Renewables Aerodynamics, heat transfer, aeromechanics,
More informationWorkbench User's Guide
Workbench User's Guide ANSYS, Inc. Southpointe 2600 ANSYS Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 16.2 July 2015 ANSYS, Inc. is certified
More informationDr Antony Robotham - Executive Director extreme Data Workshop April 2012
Dr Antony Robotham - Executive Director extreme Data Workshop 19-20 April 2012 A Centre of Excellence in Virtual Engineering VE best practice demonstration VE business development and research VE education
More informationANSYS BELGIUM TRAINING GUIDE
ANSYS BELGIUM TRAINING GUIDE ANSYS BELGIUM TRAINING GUIDE Welcome to ANSYS Belgium s training guide. In addition to the quality of the code, it is the training and support services we provide that have
More informationHFSS 3D Components. Steve Rousselle, ANSYS. Build, Share, Conquer Release. Release ANSYS, Inc.
HFSS 3D Components Build, Share, Conquer 2015.0 Release Steve Rousselle, ANSYS 1 2015 ANSYS, Inc. What is a 3D Component? Exploded View Assembly of 3D Components Device 2 2015 ANSYS, Inc. Introduction
More informationRoman Walsh Application Engineering Manager
Rapid Engineering through Topological Optimization and Direct Modeling 15.0 Release Roman Walsh Application Engineering Manager Roman.Walsh@ansys.com 1 2014 ANSYS, Inc. October 23, 2014 About ANSYS, Inc.
More informationComposites for JEC Conference. Zach Abraham ANSYS, Inc.
Composites for JEC Conference Zach Abraham ANSYS, Inc. 1 Our Strategy Simulation-Driven Product Development Fluid Dynamics Structural Mechanics Explicit Dynamics Low-Frequency Electromagnetics High-Frequency
More informationsuite nventium From Concept to Product
I suite nventium From Concept to Product Image Courtesy of WorldAutoSteel Enterprise Product Development Solution From Concept to Product The Inventium Suite is an enterprise product development solution.
More informationThe Science of Making Torque from Wind
The Science of Making Torque from Wind Oldenburg October 9-11, 2012 Recent advances in aeroelasticity of wind turbines Spyros Voutsinas NTUA, School of Mechanical Engineering Outline 1. Aeroelasticity:
More informationANSYS Workbench as an Integration Platform for CAE Simulation
ANSYS Workbench as an Integration Platform for CAE Simulation Judd Kaiser Workbench Framework Product Manager 2010 ANSYS South American Conference October 20, 2010 2010 ANSYS, Inc. All rights reserved.
More informationANSYS, Inc. Release Notes
ANSYS, Inc. Release Notes ANSYS, Inc. Release 14.5 Southpointe October 2012 275 Technology Drive 000410 Canonsburg, PA 15317 ANSYS, Inc. is ansysinfo@ansys.com certified to ISO 9001:2008. http://www.ansys.com
More informationLeveraging Integrated Concurrent Engineering for vehicle dynamics simulation. Manuel CHENE MSC.Software France
Leveraging Integrated Concurrent Engineering for vehicle dynamics simulation Manuel CHENE MSC.Software France Agenda Challenge of vehicle dynamic simulation: frequency domain coverage necessity for a multi
More informationDNV GL s 16th Technology Week
OIL & GAS DNV GL s 16th Technology Week Advanced Simulation for Offshore Application: Application of CFD for Computing VIM of Floating Structures 1 SAFER, SMARTER, GREENER OUTLINE Introduction Elements
More informationPreliminary investigation into two-way fluid structure interaction of heliostat wind loads Josh Wolmarans
Preliminary investigation into two-way fluid structure interaction of heliostat wind loads Josh Wolmarans Supervisor: Prof Ken Craig Clean Energy Research Group (CERG), Department of Mechanical and Aeronautical
More informationCAD embedding and integration analysis of CFD and Electromagnetic simulation, with Confidence
CAD embedding and integration analysis of CFD and Electromagnetic simulation, with Confidence Summary Fred Mendonça, CD-adapco, London fred@uk.cd-adapco.com Process Integration, Partnership, CAE Workflow,
More informationPDA Trainer Certification Process V 1.0
PDA Trainer Certification Process V 1.0 ~ 1 ~ Index Introduction to the Certification Process... 3 Certification Process Steps... 4 Description of the Certification Process Steps... 5 A - PDA Trainer Profile...
More informationRBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent
RBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent Gilles Eggenspieler Senior Product Manager 1 Morphing & Smoothing A mesh morpher is a tool capable of performing mesh modifications in order
More informationANSYS Academic 11.0 Summary For Customers & Prospects Revision 4.0 October 2007
ANSYS Academic 11.0 Summary For Customers & Prospects Revision 4.0 October 2007 Dr. Paul Lethbridge Academic & Research Program Manager 2007 ANSYS, Inc. All rights reserved. 1 Product Strategy 2007 ANSYS,
More informationSimulation Technology for Offshore and Marine Hydrodynamics Status Review and Emerging Capabilities
Simulation Technology for Offshore and Marine Hydrodynamics Status Review and Emerging Capabilities Lee Sing-Kwan and Seah Ah Kuan American Bureau of Shipping Presented at the 2 nd International MTEC 2007
More informationIntroduction to ANSYS
Lecture 1 Introduction to ANSYS ICEM CFD 14. 0 Release Introduction to ANSYS ICEM CFD 1 2011 ANSYS, Inc. March 22, 2015 Purpose/Goals Ansys ICEM CFD is a general purpose grid generating program Grids for
More informationAurélien Thinat Stéphane Cordier 1, François Cany
SimHydro 2012:New trends in simulation - Hydroinformatics and 3D modeling, 12-14 September 2012, Nice Aurélien Thinat, Stéphane Cordier, François Cany Application of OpenFOAM to the study of wave loads
More informationComputational Fluid Dynamics PRODUCT SHEET
TM 2014 Computational Fluid Dynamics PRODUCT SHEET 1 Breaking Limitations The Challenge of Traditional CFD In the traditional mesh-based approach, the reliability highly depends on the quality of the mesh,
More informationRealize Your Product Promise. Mechanical Products
Realize Your Product Promise Mechanical Products Courtesy Dale Earnhardt, Engineering Inc. Transient analysis of rigid/flexible suspension mechanism using kinematic joints, springs and contacts The trusted
More informationIntroduction to ANSYS ICEM CFD
Lecture 1 Introduction to ANSYS ICEM CFD 14.5 Release Introduction to ANSYS ICEM CFD 2012 ANSYS, Inc. April 1, 2013 1 Release 14.5 Purpose/Goals Ansys ICEM CFD is a general purpose grid generating program
More informationEnabling Efficient Optimization / Sensitivity and Robustness Analysis for Crashworthiness, NVH, and Multi-disciplinary Concept Assessments
Parametric Modeling of Car Body Structures Enabling Efficient Optimization / Sensitivity and Robustness Analysis for Crashworthiness, NVH, and Multi-disciplinary Concept Assessments White Paper by Dr.
More informationMaximize automotive simulation productivity with ANSYS HPC and NVIDIA GPUs
Presented at the 2014 ANSYS Regional Conference- Detroit, June 5, 2014 Maximize automotive simulation productivity with ANSYS HPC and NVIDIA GPUs Bhushan Desam, Ph.D. NVIDIA Corporation 1 NVIDIA Enterprise
More informationSmartDO. Smart Computing. Smart Design Optimization. Tel :
SmartDO Design Optimization/ System Integration/ Process Automation Email : contact@smartdo.co Tel : 886-37-462-733 SmartDO Optimize Your Product. Make The Most Profit Out Of Your CAE Investment SmartDO
More informationSimulation of Offshore Wave Impacts with a Volume of Fluid Method. Tim Bunnik Tim Bunnik MARIN
Simulation of Offshore Wave Impacts with a Volume of Fluid Method Tim Bunnik Tim Bunnik MARIN Outline Part I: Numerical method -Overview Part II: Applications - Dambreak - Wave run-up - Sloshing loads
More informationUse of STAR-CCM+ in Marine and Off-Shore Engineering - Key Features and Future Developments - M. Perić, F. Schäfer, E. Schreck & J.
Use of STAR-CCM+ in Marine and Off-Shore Engineering - Key Features and Future Developments - M. Perić, F. Schäfer, E. Schreck & J. Singh Contents Main features of STAR-CCM+ relevant for marine and offshore
More information