ANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd.
|
|
- Aubrey O’Brien’
- 5 years ago
- Views:
Transcription
1 ANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd. 1
2 ANSYS Workbench Platform The most comprehensive platform for Multiphysics Simulations ANSYS Workbench Framework ANSYS DesignXplorer ANSYS Engineering Knowledge Manager (EKM) DX DOE Optimization Etc. Geometry Meshing Mechanical Fluids Workbench Framework Project management Multiphysics coupling Design point management Scripting SDK Etc. Electronics EKM Data Mgt Process Mgt Workgroups Enterprises Etc. 2
3 Outline ANSYS 14.0 Geometry Advances ANSYS 14.0 Meshing Advances 3
4 ANSYS 14.0 Geometry Advances 4
5 ANSYS 14.0 Geometry Advances Focus on enhancing your productivity through new features, increased flexibility, efficiency and usability ANSYS DesignModeler Core modeling improvements Application-specific modeling ANSYS SpaceClaim Direct Modeler Improved Workbench integration Enhanced Model Preparation Interoperability Support for new CAD releases New CAD file readers 5
6 Direct Entity Input for Modeling Operations Direct entity selections are accepted for Extrude, Revolve, Sweep and Skin/Loft operations Named selections and sketches remain supported as valid inputs for greater automation and flexibility 6 Extrude Revolve Sweep
7 Toolbar Customization Option to customize Toolbars based on physics or other modeling preference for easy and direct access to preferred features and tools All features and tools Mechanical centric features and tools Fluids centric features and tools Electronics centric features and tools 7
8 More Hot Keys New set of hot keys (short cuts) for frequently repeated operations F3: Apply F4: Cancel F6: Toggle display (shaded+edges/shaded/wireframe) F7: Zoom to Fit Ctrl-A: Select All Ctrl-P: Toggle Point selection filter Ctrl-E: Toggle Edge selection filter Ctrl-F: Toggle Face selection filter Ctrl-B: Toggle Body selection filter Sketching mode only Ctrl-Z: Undo Ctrl-Y: Redo Ctrl-C: Copy Ctrl-X: Cut Ctrl-V: Paste 8
9 Additional Visualization Controls Improved visualization controls for modeling and topology verifications Available through View options or directly from the Toolbar Edge Direction Display Vertex Display 9
10 Additional Usability Enhancements Single/Box selection toggle RMB + LMB combination to easily toggle between the two selection modes Auto Freeze during slicing Slice feature and Slice Material operations are now available for all bodies Both active and frozen Active bodies involved in the slice are changed to frozen state automatically 10 Active Bodies Bodies involved in the slice are changed to a frozen state automatically
11 Improved Named Selection Transfer and Error Handling Improved Named Selection transfer between ANSYS DesignModeler and other ANSYS Workbench applications Improved Error handling Attach failures Share topology failures A new export property inside DesignModeler to control named selection transfer to other workbench applications Improved error handling to provide appropriate error and warnings in case of failures 11
12 Mid Surfacing Improvements Selection tolerance Tolerance is used to detect face pairs in case of imperfect offsets Selecting an undetected pair manually provides feedback on tolerance value required, which can be used for automated selection Default value is set to zero Trimming and other cleanup improvements Selection tolerance value is suggested to user 12 Without selection tolerance All the pairs detected successfully with Selection tolerance
13 Rotor Shaft Feature A new option to import and create Shaft geometry Reads input from a text file and automatically creates line bodies with specified crosssections Line bodies for rotor shafts Cross sections are assigned automatically Input data in a text file 13
14 Improved Interoperability with Ansoft Products Bi-directional geometry transfer between Ansoft products and Workbench applications for multiphysics simulations (DesignModeler/Mechanical/Meshing) 14
15 Improved CAD Interoperability Several new readers to provide two types of interfaces for all major CAD systems for improved productivity and flexibility Associative Interfaces Associative, parametric and Bi-directional Readers Native file readers for users without live CAD access Pro/Engineer A new DWG Reader for AutoCAD Improved model processing for faster and targeted updates ANSYS DesignModeler 15
16 CAD Interoperability Options Geometry Interfaces at R Associative Interfaces (Associative, bidirectional and parametric) Creo Parametric Creo Elements/Pro Creo Elements/Direct Modeling NX 8.0 Inventor 2012 SolidWorks 2011 Solid Edge ST3 (103) Solid Edge ST4 CATIA V5 R21 Teamcenter , 8.3 CAD Readers AutoCAD 2012* Creo Elements/Pro NX 7.5 Inventor 2011 SolidWorks 2011 Catia V5 R20 Catia V4 IGES and STEP Parasolid 24.0 ACIS R20 GAMBIT 2.4 * Requires an AutoCAD installation
17 ANSYS SpaceClaim: Improved Integration Improved ANSYS Workbench Integration Improved Associativity and data transfer Support for multiple design points Preview options for Topology Sharing Preview sharing to view topology sharing before transferring the model into Workbench Help detect and fix topology sharing issues before transfer 17
18 ANSYS SpaceClaim: Improved Selection and Repair Improved Selection and Repair Options More Selection Options Select Parents Select Children ClipView option to isolate and examine selected region Multi-face patch option for fixing missing faces ClipView Without multi-face patch on With multi-face patch on 18
19 ANSYS 14.0 Meshing Advances 19
20 Rapid & Robust Meshing Top on the list of challenges engineering companies are facing is shortened product development schedules while at the same time the product designs themselves are becoming increasingly complex. Meshing of these designs introduce challenges in terms of speed, robustness and accuracy. Courtesy Siemens AG. 20
21 Selective Control Persistence Record and replay sequence of meshing steps Flexibility Adv. Front surface meshing Separate min size for curvature & proximity 21
22 Virtual Topologies Virtual Topologies (VT) enabling improved automation, flexibility, and usability: More interactive usage through direct graphics interaction rather than tree objects Ability to run Auto VT on selected edges, faces or bodies Clustering of faces/edges Create hard vertex Face splits Improved meshing performance w/vts Cluster 1 2 Virtual Faces created. 1 for each cluster. Cluster 2 22
23 Virtual Topologies Flexibility: Allows user to get mapped or swept mesh in easier fashion 23
24 Virtual Topologies 24
25 Mesh Connections Mesh connections now work at part level: Post mesh connections by default (pre option still exists) Base part mesh stored to allow for quick changes 25
26 Mesh Connections Local connection changes or mesh changes only affect local area: 26
27 Support for default and/or uniform quad/tri Can mix and match mesh methods with mesh connections, and or use selective meshing: Default quad/tri Uniform quad/tri Mesh connections 27
28 Shell Meshing Improvements Better quad smoothing: Improved laplacian smoothing More ruled mesh on rectangles, etc Default quad/tri 14.0 Default quad/tri Example has ribs attached that are hidden 28
29 Hex Meshing MultiZone improvements Imprinting Through bodies Through long stretches of connected side faces Support for Match control Robustness Speed Speed improvements for multi-body parts with swept blocks 29
30 SUMMARY Geometry Advances: Usability Analysis specific custom tools Interoperability Meshing Advances: Automatic and Robust Meshing Shell Meshing Hex Meshing ICEM CFD and TGrid 30
31 ANSYS 14.0 Geometry and Meshing Update THANK YOU! 31
Advances in Pre-Processing
Advances in Pre-Processing Laz Foley Confidence by Design Chicago June 14, 2012 1 Outline ANSYS DesignModeler Modeling Improvements ANSYS SpaceClaim Direct Modeler Workbench Integration and Model Preparation
More informationIntroduction to ANSYS DesignModeler
Lecture 7 CAD Connections 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 CAD Connections What will you learn from this presentation: Geometry Import
More informationIntroduction to ANSYS DesignModeler
Lecture 5 Modeling 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations Meshing
More informationIntroduction And Overview ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Introduction And Overview 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary The ANSYS Workbench represents more than a general purpose engineering tool. It provides a highly integrated engineering
More informationLecture 6: CAD Import Release. Introduction to ANSYS Fluent Meshing
Lecture 6: CAD Import 14.5 Release Introduction to ANSYS Fluent Meshing 1 Fluent Meshing 14.5 Assembly meshing Workflow This Lecture Tessellated or Conformal CAD import Cap Inlet/Outlets, Create Domains/BOI
More information3-D Design Flow Automation for HFSS. Jim DeLap Technical Manager
3-D Design Flow Automation for HFSS Jim DeLap Technical Manager jim.delap@ansys.com 1 Motivation Existing methods of defining 3D models within HFSS have been sufficient since the introduction of the product
More informationLecture 7: Mesh Quality & Advanced Topics. Introduction to ANSYS Meshing Release ANSYS, Inc. February 12, 2015
Lecture 7: Mesh Quality & Advanced Topics 15.0 Release Introduction to ANSYS Meshing 1 2015 ANSYS, Inc. February 12, 2015 Overview In this lecture we will learn: Impact of the Mesh Quality on the Solution
More informationCAD Integration ANSYS Drive Canonsburg, PA (T) (F)
CAD Integration ANSYS, Inc. Southpointe 2600 ANSYS Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 18.2 August 2017 ANSYS, Inc. and ANSYS Europe,
More informationIntroduction to ANSYS
Lecture 1 Introduction to ANSYS ICEM CFD 14. 0 Release Introduction to ANSYS ICEM CFD 1 2011 ANSYS, Inc. March 22, 2015 Purpose/Goals Ansys ICEM CFD is a general purpose grid generating program Grids for
More informationIntroduction to ANSYS ICEM CFD
Lecture 1 Introduction to ANSYS ICEM CFD 14.5 Release Introduction to ANSYS ICEM CFD 2012 ANSYS, Inc. April 1, 2013 1 Release 14.5 Purpose/Goals Ansys ICEM CFD is a general purpose grid generating program
More informationGeometry Clean-up in. Numerical Simulations
Geometry Clean-up in Numerical Simulations Scope of the this Presentation The guidelines are very generic in nature and has been explained with examples. However, the users may need to check their software
More informationWhat s New Topics in 3.5.1: 1. User Interface 5. Reference Geometry 2. Display 6. Sketch 3. livetransfer 7. Surface / Solid 4. Scan Tools 8.
]^ New Release Turning Measured Points into Solid Models What s New Topics in 3.5.1: 1. User Interface 5. Reference Geometry 2. Display 6. Sketch 3. livetransfer 7. Surface / Solid 4. Scan Tools 8. Measure
More informationSpaceClaim Professional The Natural 3D Design System. Advanced Technology
SpaceClaim Professional The Natural 3D Design System SpaceClaim Professional is the 3D productivity tool for engineers who contribute to the design and manufacture of mechanical products across a broad
More informationCreo Elements/ Pro Advanced SE
Creo Elements/ Pro Advanced SE Create Innovative Designs Faster and More Efficiently Formerly Pro/ENGINEER The Creo Elements/Pro Advanced SE (Standard Edition) Package adds powerful data management capabilities
More informationCoCreate OneSpace Modeling Data Adapter
CoCreate OneSpace Modeling 2007 - Data Adapter This document contains the individual datasheets for the native CAD adapters Table of Contents 1. CATIA V4 Data Adapter 2. Unigraphics Data Adapter 3. Pro/ENGINEER
More informationDesign Exploration and Robust Design. Judd Kaiser Product Manager, ANSYS Workbench Platform
Design Exploration and Robust Design Judd Kaiser Product Manager, ANSYS Workbench Platform 1 Agenda 2 What is Robust Design? At ANSYS Workbench Principles DesignXplorer ANSYS Vision What is Robust Design?
More informationAll-in-One Software Solution for Metal Additive Manufacturing
All-in-One Software Solution for Metal Additive Manufacturing What Makes 3DXpert Ideal for Metal Additive Manufacturing? Specialized Requirements Call for Specialized Software Metal Additive Manufacturing
More informationCADdoctor. CADdoctor EX. Product Configuration/Requirements. Product Configuration. Standard Function. Import & Export Options.
CADdoctor Product Configuration/Requirements Version: EX 8.0 Released date: May 8, 2018 Version: SX 4.2 Released date: July 6, 2017 CADdoctor EX Product Configuration Standard Function Product Import &
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationGEOMETRY MODELING & GRID GENERATION
GEOMETRY MODELING & GRID GENERATION Dr.D.Prakash Senior Assistant Professor School of Mechanical Engineering SASTRA University, Thanjavur OBJECTIVE The objectives of this discussion are to relate experiences
More informationFeature and Topology Detection
Feature and Topology Detection Greater possibilities with Capvidia extension and PARTsolutions Cadenas Industry Forum February 5th, 2015 Thomas Tillmann Capvidia GmbH Agenda Company Overview Application
More informationCATIA V5R21 - FACT SHEET
CATIA V5R21 - FACT SHEET Introduction What s New at a Glance Overview Detailed Description INTRODUCTION CATIA V5 is the leading solution for product success. It addresses all manufacturing organizations;
More informationAttila4MC. Software for Simplifying Monte Carlo. For more info contact or
Attila4MC Software for Simplifying Monte Carlo For more info contact attila@varian.com or Gregory.Failla@varian.com MCNP and MCNP6 are trademarks of Los Alamos National Security, LLC, Los Alamos National
More informationIntroduction to ANSYS FLUENT Meshing
Workshop 04 CAD Import and Meshing from Conformal Faceting Input 14.5 Release Introduction to ANSYS FLUENT Meshing 2011 ANSYS, Inc. December 21, 2012 1 I Introduction Workshop Description: CAD files will
More informationWorkshop 3: Cutcell Mesh Generation. Introduction to ANSYS Fluent Meshing Release. Release ANSYS, Inc.
Workshop 3: Cutcell Mesh Generation 14.5 Release Introduction to ANSYS Fluent Meshing 1 2011 ANSYS, Inc. December 21, 2012 I Introduction Workshop Description: CutCell meshing is a general purpose meshing
More informationIntroduction to ANSYS Fluent Meshing
Workshop 06: Mesh Creation Including Removal of Gaps and Baffle Thickness 14.5 Release Introduction to ANSYS Fluent Meshing 1 2011 ANSYS, Inc. December 21, 2012 I Introduction Workshop Description: Fluent
More informationMay 11, ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary Inventory #
Chapter 1 ANSYS DesignModeler Introduction to Workbench 1-1 ANSYS Workbench Overview ANSYS Workbench comprises the following modules: Simulation for performing structural and thermal analyses using the
More informationEducation Curriculum Surface Design Specialist
Education Curriculum Surface Design Specialist Invest your time in imagining next generation designs. Here s what we will teach you to give shape to your imagination. CATIA Surface Design Specialist CATIA
More informationFreeStyle Shaper Optimizer & Profiler
FreeStyle Shaper Optimizer & Profiler Page 1 Preface Using This Guide More Information What's New? Getting Started Starting the FreeStyle Workbench Creating a First Surface Editing the Surface Creating
More informationKubotek KeyCreator V8.5 What s New Page 1 of 12. Kubotek KeyCreator V8.5 What s New
Page 1 of 12 Kubotek KeyCreator V8.5 What s New Page 2 of 12 Table of Contents File Management 3 General Interface 4 Detailing/Drawing 5 Modeling 10 Display and Graphics 12 Page 3 of 12 File Management
More informationAutodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
More informationWORKSHOP 10 HEX VS TET SOLID ELEMENT MESH
WORKSHOP 10 HEX VS TET SOLID ELEMENT MESH VS WS10-1 WS10-2 Problem Description This workshop is for creating a tetrahedral and hexahedral element mesh for a geometric solid. The tetrahedral mesh can be
More informationIntroduction to ANSYS DesignModeler
Lecture 9 Beams and Shells 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Beams & Shells The features in the Concept menu are used to create and modify
More informationMid Surface Creation. Workshop 5 4. ANSYS, Inc. Proprietary Inventory # May 11, ANSYS, Inc. All rights reserved.
Mid Surface Creation Workshop 5 4 May 11, 2007 2007 ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary Inventory #002496 5 1 Overview Goal Familiarize users with mid surface capabilities that are
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationParametric. Practices. Patrick Cunningham. CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved.
Parametric Modeling Best Practices Patrick Cunningham July, 2012 CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. E-Learning Webinar Series This
More informationAutomatic & Robust Meshing in Fluids 2011 ANSYS Regional Conferences
Automatic & Robust Meshing in Fluids 2011 ANSYS Regional Conferences 1 This is just a taste Note that full 14.0 update webinars of an hour per product will be scheduled closer to the release This presentation
More informationSimLab Release Notes. 1 A l t a i r E n g i n e e r i n g
SimLab 11.0 Release Notes 1 A l t a i r E n g i n e e r i n g System Support extended to load and save GDA/SLB files of size greater than 4GB. Memory allocation is enhanced to support large models. Kubrix
More informationCreo Elements/ Direct Modeling Express
Creo Elements/ Direct Modeling Express Edition Comparison Chart Learn how upgrading to Modeling 18.0, the leading direct 3D CAD design software, can deliver faster design cycles and responsiveness to change
More informationNose Cone. Chapter 4. Rocket 3D Print. A. Revolve. Step 1. Click File Menu > New, click Part and OK. SOLIDWORKS 16 Nose Cone ROCKET 3D PRINT Page 4-1
Chapter 4 Rocket 3D Print Nose Cone A. Revolve. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the content toolbar, Fig. 1. Step
More informationTetra4D Automate. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Automate
Tetra4D Automate Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Automate Tetra4D Automate 2018 Release Notes 1 Table of Contents Version 2018... 3
More informationPTC CREO. ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks. PTC Creo Essentials Packages
PTC CREO PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more products in less time,
More informationVersion 2011 R1 - Router
GENERAL NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Convert Raster to Vector
More informationWorkbench v15 Update
Twin Cities ANSYS User Meeting April 2014 Workbench v15 Update within Epsilon Agenda 1. Usability Improvements 2. New Features 3. Design Modeler Enhancements 4. V14 reminders 2 Usability Improvements 3
More informationReadme and update information
hypercad -S Readme and update information Table of Contents 1. hypercad -S is CAD for CAM!... 1 2. Additions to documentation... 2 Release 2018.2 SP1... 2 Release 2018.2... 2 3. Information on direct
More informationDXF, IGES WMF, EMF STL, VDA, Parasolid, Rhino, ACIS
General NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Report Creator and Designer
More informationNX Advanced Simulation
Siemens PLM Software Integrating FE modeling and simulation streamlines product development process Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis
More informationIntroduction to ANSYS DesignXplorer
Overview 14. 5 Release Introduction to ANSYS DesignXplorer 1 2013 ANSYS, Inc. September 27, 2013 What is DesignXplorer? DesignXplorer (DX) is a tool that uses response surfaces and direct optimization
More informationStructural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment
ANSYS Workbench Tutorial Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
More informationWorld-class finite element analysis (FEA) solution for the Windows desktop
World-class finite element analysis (FEA) solution for the Windows desktop Benefits Significantly speed up the design process by bringing simulation closer to design and reducing time-to-market Reduce
More informationFreeStyle Shaper & Optimizer
FreeStyle Shaper & Optimizer Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA
More informationComplete and robust mechanical simulation solution. imaginit.com/simulation-mechanical
Complete and robust mechanical simulation solution A mechanical simulation solution for finite element analysis powered by the Autodesk Nastran solver Accurately predict product behavior, optimize and
More informationWorkbench Tutorial Minor Losses, Page 1 Tutorial Minor Losses using Pointwise and FLUENT
Workbench Tutorial Minor Losses, Page 1 Tutorial Minor Losses using Pointwise and FLUENT Introduction This tutorial provides instructions for meshing two internal flows. Pointwise software will be used
More informationA Comprehensive Introduction to SolidWorks 2011
A Comprehensive Introduction to SolidWorks 2011 Godfrey Onwubolu, Ph.D. SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Chapter 2 Geometric Construction Tools Objectives: When
More informationSpaceClaim Release Notes. SpaceClaim Release Notes
SpaceClaim 2017.0 Release Notes Table of Contents Table of Contents... 2 SpaceClaim 2017.0 Enhancements Overview... 1 2017.0 Items... 2 Scripting... 2 Equations... 6 Small Units Modeling... 8 Flythrough...
More informationimaginit.com/simulation Complete and robust mechanical simulation solution
imaginit.com/simulation Complete and robust mechanical simulation solution A mechanical simulation solution for finite imaginit.com/simulation element analysis powered by the Autodesk Nastran solver Accurately
More informationAbaqus/CAE: Geometry Import and Meshing
Abaqus/CAE: Geometry Import and Meshing Day 1 Overview of Abaqus/CAE Lecture 1 Demonstration 1 Demonstration 2 Workshop 1 Workshop 2 Workshop 3 Geometry Import and Repair Geometry Import and Repair: Lens
More informationStructural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment. Kent L. Lawrence
ANSYS Workbench Tutorial Structural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
More informationNew Frontiers in CAE Interoperability. Andy Chinn ITI TranscenData
New Frontiers in CAE Interoperability Andy Chinn ITI TranscenData arc@transcendata.com Introduction Data Exchange Integrity Issue of Meshability Geometry Reasoning Geometry Reasoning Applications Conclusions
More informationAutoCAD Lynn Allen s Tips and Tricks
AutoCAD 2012 Lynn Allen s Tips and Tricks AutoCAD 2012 Lynn Allen s Tips and Tricks NOTE You must install Autodesk Inventor Fusion 2012 to use it. In Fusion you can zoom, pan, and orbit to navigate around
More informationAutodesk Moldflow Adviser AMA Model Import Formats
Autodesk Moldflow Adviser 212 AMA Model Import Formats Revision 1, 16 March 212. Contents Chapter 1 Supported model import formats....................... 1 Supported model import formats................................
More informationWorld-class finite element analysis (FEA) solution for the Windows desktop
World-class finite element analysis (FEA) solution for the Windows desktop fact sheet Siemens PLM Software www.siemens.com/plm/femap Summary Femap software is an advanced engineering analysis environment
More informationWhat s New R1
- Contents General/System 3 New InstallShield Wizard >>...3 SURFCAM 2014- Recommended System Requirements >>...4 Utilities 5 New Support Assistant >>...5 Functionality 6 Improved Layer Control >>...6 Enhanced
More informationJMAG-Designer Next Generation Electromagnetic Simulation Pre/Post System
JMAG-Designer Next Generation Electromagnetic Simulation Pre/Post System Draft Engineering Technology Division JRI Solutions, Ltd. 1 Contents Introduction Transition from JMAG-Designer to JMAG Concept
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationFinite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench
Finite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench Course Curriculum (Duration: 120 Hrs.) Section I: ANSYS Mechanical APDL Chapter 1: Before you start using ANSYS a. Introduction to
More informationIntroduction to ANSYS ICEM CFD
Lecture 4 Volume Meshing 14. 0 Release Introduction to ANSYS ICEM CFD 1 2011 ANSYS, Inc. March 21, 2012 Introduction to Volume Meshing To automatically create 3D elements to fill volumetric domain Generally
More informationSpaceClaim 2016 Beta Release Notes. SpaceClaim 2016 Beta. Release Notes
SpaceClaim 2016 Beta Release Notes Table of Contents Table of Contents... 2 SpaceClaim 2016 Enhancements Overview... 1 Beta Items... 2 Skin Surface... 2 Pull... 19 Move... 22 Split Body... 25 Split...
More informationFundamentals of Modeling with Simcenter 3D Robin Boeykens
Fundamentals of Modeling with Simcenter 3D Robin Boeykens robin.boeykens@siemens.com Realize innovation. 3D CAE for the digital twin Simcenter 3D Page 2 Simcenter 3D Engineering Desktop Simcenter 3D Engineering
More informationGeometry Definition in the ADINA User Interface (AUI) Daniel Jose Payen, Ph.D. March 7, 2016
Geometry Definition in the ADINA User Interface (AUI) Daniel Jose Payen, Ph.D. March 7, 2016 ADINA R&D, Inc., 2016 1 Topics Presented ADINA에서쓰이는 Geometry 종류 Simple (AUI) geometry ADINA-M geometry ADINA-M
More informationDirect Modeling: Easy Changes in CAD?
ASEE EDGD Midyear Conference 70th Midyear Technical Conference: Graphical Expressions of Engineering Design Direct Modeling: Easy Changes in CAD? Holly K. Ault Worcester Polytechnic Institute, hkault@wpi.edu
More informationI-deas NX Series Master Modeler Foundation capabilities for feature-based variational solid modeling
I-deas Series Master Modeler Foundation capabilities for feature-based variational solid modeling fact sheet www.ugs.com Summary I-deas Series Master Modeler is the core design module for the I-deas product
More informationChapter 9 3D Modeling
Chapter 9 3D Modeling Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 3D Modeling Snapshot Since Mid 1980 s become common place in industry Software Types Wireframe
More informationGeometric Modeling Systems
Geometric Modeling Systems Wireframe Modeling use lines/curves and points for 2D or 3D largely replaced by surface and solid models Surface Modeling wireframe information plus surface definitions supports
More informationMid-Surface Creation. Mid-Surface Tool:
Mid-Surface Creation Mid-Surface Tool: Reduces 3D geometry of constant thickness to a simplified shell representation ti Automatically places surface body at mid point between 3D face pairs Allows shell
More informationWorking with Neutral Format Surface and Solid Models in Autodesk Inventor
Working with Neutral Format Surface and Solid Models in Autodesk Inventor JD Mather Pennsylvania College of Technology Session ID ML205-1P In this class we will learn how to utilize neutral format data
More informationChapter 1. SolidWorks Overview
Chapter 1 SolidWorks Overview Objectives: When you complete this chapter you will: Have a good background knowledge of SolidWorks Have learnt how to start a SolidWorks session Understand the SolidWorks
More informationComputer Aided Engineering Applications
Computer Aided Engineering Applications 1A.Geometric Modeling 1.1 Geometric modelling methods 1.2 Data representation 1.3 Modeling functions 1.4 Structure of a CAD system Engi 6928 - Fall 2014 1.Geometric
More informationLAB # 2 3D Modeling, Properties Commands & Attributes
COMSATS Institute of Information Technology Electrical Engineering Department (Islamabad Campus) LAB # 2 3D Modeling, Properties Commands & Attributes Designed by Syed Muzahir Abbas 1 1. Overview of the
More informationSpaceClaim 2009 SP2. Release Notes
SpaceClaim 2009 SP2 Release Notes Table of contents General... 3 SpaceClaim 2009 SP2 Highlights... 3 Print... 4 Groups... 4 Object, document, component properties... 4 Structure tree... 4 Select... 6 Designing
More informationCreo for Analyst. Overview
Creo for Analyst Overview In this course, you will learn how to utilize the core functionality enhancements in Creo Parametric 2.0. First, you will become familiar with using and customizing the new ribbon
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationData Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM
Data Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM Agenda Three Digitalization Challenges Exchange Format Choices A Day in the Life of TurboFan-tastic Gmbh Exchange
More informationChapter 6. Concept Modeling. ANSYS, Inc. Proprietary Inventory # May 11, ANSYS, Inc. All rights reserved.
Chapter 6 Concept Modeling 6-1 Contents Concept Modeling Creating Line Bodies Modifying i Line Bodies Cross Sections Cross Section Alignment Cross Section Offset Surfaces From Lines Surfaces From Sketches
More informationAutomatic & Robust Meshing in Fluids 2011 ANSYS Regional Conferences
Automatic & Robust Meshing in Fluids 2011 ANSYS Regional Conferences 1 Automatic & Robust Meshing Assembly Meshing Assembly Meshing enables dramatically reduced time to mesh for typical CAD models by eliminating
More informationCAD Comparison and Related Technology For Enhanced Digital Workflows
CAD Comparison and Related Technology For Enhanced Digital Workflows Thursday, November 16, 2017 Annalise Suzuki Director of Technology & Engagement Elysium Company Intro 30+ Years of CAD Expertise Strong
More informationSimLab 14.1 Release Notes
SimLab 14.1 Release Notes Highlights SimLab 14.0 introduced the new user interface. SimLab 14.1 enhances the user interface using feedback from customers. In addition many new core features have been added.
More informationTetra4D Enrich. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Enrich
Tetra4D Enrich Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Enrich Tetra4D Enrich 2018 Release Notes 1 Table of Contents Version 2018... 3 Definition
More informationSolidWorks FeatureWorks: Automatic versus Interactive Recognition
SolidWorks FeatureWorks: Automatic versus Interactive Recognition What is FeatureWorks? FeatureWorks is an integrated geometry recognition module that allows for files imported to SolidWorks from other
More informationCreo 2.0. Curriculum Guide
Creo 2.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0 Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationTopology Optimization in Fluid Dynamics
A Methodology for Topology Optimization in Fluid Dynamics 1 Chris Cowan Ozen Engineering, Inc. 1210 E. Arques Ave, Suite 207 Sunnyvale, CA 94085 info@ozeninc.com Ozen Engineering Inc. We are your local
More informationThe Quality Of 3D Models
The Quality Of 3D Models Problems and Solutions for Applications Post-Design Fathi El-Yafi Senior Product Engineer Product Department of EXA Corporation 1 : Overview Status Problems Identified Defect Sources
More informationInput CAD Solid Model Assemblies - Split into separate Part Files. DXF, IGES WMF, EMF STL, VDA, Rhino Parasolid, ACIS
General NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Report Creator and Designer
More informationSpaceClaim 2009 SP1. Release Notes
SpaceClaim 2009 SP1 Release Notes Table of contents General... 4 Licensing... 4 Navigation... 5 Structure tree... 5 Copy and Paste... 6 Select... 6 General selection... 6 Select temporary objects... 7
More informationSOLIDWORKS 2019 Advanced Techniques
SOLIDWORKS 2019 Advanced Techniques Mastering Parts, Surfaces, Sheet Metal, SimulationXpress, Top Down Assemblies, Core & Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationComposite Trimmed Surfaces
LESSON 4 Composite Trimmed Surfaces Y Objectives: Import a CAD model into a database. Repair disjointed surfaces by creating composite surfaces. Mesh the newly created composite surfaces PATRAN 302 Exercise
More informationGeomagic Verify. First-Article Inspection and Portable Metrology Platform. Release Notes
Geomagic Verify First-Article Inspection and Portable Metrology Platform Release Notes Software: Geomagic Verify Version 2015.2.0 Release Date: May 2015 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2
More informationEAA SOLIDWORKS University p 1/23. Keyboard Shortcuts. Hide/Show Display Pane = F8. Magnifying Glass = G. Previous View = Ctrl+Shift+Z.
EAA SOLIDWORKS University p 1/23 Keyboard Shortcuts View - FeatureManager Tree Area = F9 View - Full Screen = F11 View - Orientation = SpaceBar View - Redraw = Ctrl+R View - Task Pane = Ctrl+F1 View -
More information