for Mainframe Type OS390-E Installation Manual (For the Unauthorized Version)

Transcription

1 for Mainframe Type OS390-E Installation Manual (For the Unauthorized Version) SP-H6E-MO First Edition: November 1,

2 The unauthorized version is a module to be used when it is not possible to register with the authorized libraries. Some functions cannot be used in this version. The following operations will not function normally. (1) Execution of pre-send jobs. (2) Setting 'J : Notifies After Post-Receive Successful Job Completion'option for Receive Completion Notification of the receive managementinformation. (3) Carrying out remote job execution from the remote machine to a Mainframe in synchronous transfer mode. (4) Sending operation of files on MT. (5) Receiving operation of files to MT. (6) Issuing request from the Management screen via a job 1 Installation Procedure HULFT is saved by using IEBCOPY in the medium in which it is provided. The five libraries that will be installed are HULFT JCL library, HULFT ISPF Panel Library, HULFT ISPF Message Library, HULFT Parameter Library and HULFT Load Module Library. The Product key and Serial Number must be registered. You will not be able to use HULFT if you do not register them. Restore HULFT JCL library Refer to 1.1 Restore the various libraries of HULFT Refer to 1.2 Create the HULFT System File Refer to Installation manual YES Use DNS and TCP/IP Host File NO Refer to Installation manual About DNS Create HULFT IP Management File Refer to Installation manual Create HULFT PORT Management File Change HULFT Screen Command Procedure Refer to Installation manual Refer to Installation manual Change the Logon Procedure Refer to Installation manual Change the Environment Settings File Refer to Installation manual Register the Product Key Refer to Installation manual 2.3 Register the Serial Number Refer to Installation manual 2.4 Register OMVS Permission Refer to Installation manual 2.5 Installation procedure 2

3 1.1 Restoring the HULFT JCL library Restore the HULFT JCL library that is stored in the medium in which HULFT is provided, to DASD using IEBCOPY (The underlined parts in the example of JCL given in this manual should be changed as per your environment). [HULFT JCL library] file attributes and capacity are as follows. LRECL=80 BLKSIZE=6160 RECFM=FB DSORG=PO SPACE=(CYL,(1,1,50)) [Example of JCL] //INSTALL JOB CLASS=A,MSGCLASS=B //JOBCAT DD DSN=USERCAT,DISP=SHR //JCLGEN EXEC PGM=IEBCOPY //IN DD DSN=HULFT.V6.JCL,DISP=(OLD,KEEP),UNIT=CMT, // VOL=SER=HUL060,LABEL=1 //OUT DD DSN=HULFT.JCL,DISP=(NEW,CATLG),UNIT=SYSDA, // VOL=SER=HUL001,SPACE=(CYL,(1,1,50)) // 3

4 1.2 Restoring the various HULFT libraries Restore HULFT Parameter Library, HULFT Load Module Library (Unauthorized version), HULFT ISPF Panel Library and HULFT ISPF Message Library given in the medium provided, to the DASD. Template JCL : HULFT.JCL(INSTALL4) [Example of JCL] //INSTALL JOB CLASS=A,MSGCLASS=B //JOBCAT DD DSN=USERCAT,DISP=SHR //PARMGEN EXEC PGM=IEBCOPY //IN DD DSN=HULFT.V6.PARMLIB, DISP=(OLD,PASS), // UNIT=CMT,VOL=SER=HUL060,LABEL=4 //OUT DD DSN=HULFT.PARMLIB,DISP=(NEW,CATLG), // UNIT=SYSDA,VOL=SER=HUL001,SPACE=(CYL,(1,,10)) //LOADGEN EXEC PGM=IEBCOPY //IN DD DSN=HULFT.V6.LOAD2,DISP=(OLD,PASS), // UNIT=CMT,VOL=SER=HUL060,LABEL=6 //OUT DD DSN=HULFT.LOAD,DISP=(NEW,CATLG),UNIT=SYSDA, // VOL=SER=HUL001,SPACE=(CYL,(20,,50)) //PNLGEN EXEC PGM=IEBCOPY //IN DD DSN=HULFT.V6.PANEL2,DISP=(OLD,PASS), // UNIT=CMT,VOL=SER=HUL060,LABEL=7 //OUT DD DSN=HULFT.PANEL,DISP=(NEW,CATLG),UNIT=SYSDA, // VOL=SER=HUL001,SPACE=(CYL,(3,,50)) 4

5 //MSGGEN EXEC PGM=IEBCOPY //IN DD DSN=HULFT.V6.MSG2,DISP=(OLD,KEEP), // UNIT=CMT,VOL=SER=HUL060,LABEL=8 //OUT DD DSN=HULFT.MSG,DISP=(NEW,CATLG),UNIT=SYSDA, // VOL=SER=HUL001,SPACE=(CYL,(3,,50)) // 5