Hitachi Universal Storage Platform V Hitachi Universal Storage Platform VM Hitachi Storage Navigator Messages

Transcription

1 Hitachi Universal Storage Platform V Hitachi Universal Storage Platform VM Hitachi Storage Navigator Messages FASTFIND LINKS Document Organization Product Version Getting Help Contents MK-96RD613-18

2 Copyright 2011 Hitachi, Ltd., Hitachi Data Systems Corporation. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Hitachi, Ltd. (hereafter referred to as Hitachi ) and Hitachi Data Systems Corporation (hereinafter referred to as Hitachi Data Systems ). Hitachi and Hitachi Data Systems reserve the right to make changes to this document at any time without notice and assume no responsibility for its use. This document contains the most current information available at the time of publication. When new or revised information becomes available, this entire document will be updated and distributed to all registered users. Some of the features described in this document may not be currently available. Refer to the most recent product announcement or contact your local Hitachi Data Systems sales office for information about feature and product availability. Notice: Hitachi Data Systems products and services can be ordered only under the terms and conditions of the applicable Hitachi Data Systems agreements. The use of Hitachi Data Systems products is governed by the terms of your agreements with Hitachi Data Systems. Hitachi is a registered trademark of Hitachi, Ltd., in the United States and other countries. Hitachi Data Systems is a registered trademark and service mark of Hitachi, Ltd., in the United States and other countries. ShadowImage and TrueCopy are registered trademarks or trademarks of Hitachi Data Systems. ESCON, IBM, and z/os are registered trademarks of International Business Machines Corporation. All other trademarks, service marks, and company names are properties of their respective owners. Microsoft product screen shots reprinted with permission from Microsoft Corporation. ii

3 Contents Preface... v Intended Audience...vi Product Version...vi Document Revision...vi Source Documents for this Revision... vii Changes in this Revision... vii Document Organization... viii Referenced Documents... viii Document Conventions...ix Convention for Storage Capacity Values...x Getting Help...x Comments...x Hitachi Storage Navigator Messages and s Hitachi Storage Navigator Messages Message Window Format Remote Console-Storage Navigator s Acronyms and Abbreviations Contents iii

4 iv Contents

5 Preface This document lists the error codes and error messages for the Hitachi Storage Navigator for Hitachi Universal Storage Platform V and Hitachi Universal Storage Platform VM (USP V/VM) storage system, and provides the recommended action for the error conditions. Please read this document carefully to understand how to use this product, and maintain a copy for reference purposes. This preface includes the following information: Intended Audience Product Version Document Revision Source Document(s) for this Revision Changes in this Revision Document Organization Referenced Documents Document Conventions Convention for Storage Capacity Values Getting Help Comments Preface v

6 Intended Audience This document is intended for system administrators, Hitachi Data Systems representatives, and Authorized Service Providers who are involved in installing, configuring, and operating the Hitachi Universal Storage Platform V and VM storage systems. This document assumes the following: The user has a background in data processing and understands RAID storage systems and their basic functions. The user is familiar with the Universal Storage Platform V and/or VM storage system and has read the Universal Storage Platform V/VM User and Reference Guide. The user is familiar with the Storage Navigator software for the Universal Storage Platform V/VM and has read the Storage Navigator User s Guide. The user is familiar with the Hitachi USP V/VM array subsystem. Product Version This document revision applies to USP V/VM microcode x and higher. Document Revision Revision Date Description MK-96RD613-P February 2007 Preliminary Release MK-96RD April 2007 Initial Release, supersedes and replaces MK-96RD613-P MK-96RD May 2007 Revision 1, supersedes and replaces MK-96RD MK-96RD July 2007 Revision 2, supersedes and replaces MK-96RD MK-96RD August 2007 Revision 3, supersedes and replaces MK-96RD MK-96RD November 2007 Revision 4, supersedes and replaces MK-96RD MK-96RD January 2008 Revision 5, supersedes and replaces MK-96RD MK-96RD March 2008 Revision 6, supersedes and replaces MK-96RD MK-96RD March 2008 Revision 7, supersedes and replaces MK-96RD MK-96RD May 2008 Revision 8, supersedes and replaces MK-96RD MK-96RD August 2008 Revision 9, supersedes and replaces MK-96RD MK-96RD November 2008 Revision 10, supersedes and replaces MK-96RD MK-96RD February 2009 Revision 11, supersedes and replaces MK-96RD MK-96RD June 2009 Revision 12, supersedes and replaces MK-96RD MK-96RD November 2009 Revision 13, supersedes and replaces MK-96RD MK-96RD February 2010 Revision 14, supersedes and replaces MK-96RD vi Preface

7 Revision Date Description MK-96RD July 2010 Revision 15, supersedes and replaces MK-96RD MK-96RD September 2010 Revision 16, supersedes and replaces MK-96RD MK-96RD December 2010 Revision 17, supersedes and replaces MK-96RD MK-96RD April 2011 Revision 18, supersedes and replaces MK-96RD Source Documents for this Revision MK-96RD613-18b Changes in this Revision Added the following error messages: Part , 70000, , 68925, , 65812, , Changed the following error messages: Part , 58106, 58333, 58456, 58684, 58685, , 8607, 8614, 8615, 8622, 8623, Deleted the following error messages: Part , , Changed the severity level for the following error messages: Part , 56555, 56556, Preface vii

8 Changed the failure level for the following error messages: Part Document Organization The following table provides an overview of the contents and organization of this document. Click the chapter title in the left column to go to that chapter. The first page of each chapter provides links to the sections in that chapter. Chapter Hitachi Storage Navigator for Universal Storage Platform V/VM Messages and s Acronyms and Abbreviations Description Covers the various messages and error codes released by the storage system. Defines the acronyms and abbreviations used in this document. Referenced Documents Hitachi Universal Storage Platform V/VM: USP V/VM User and Reference Guide, MK-96RD635 Storage Navigator Users Guide, MK-96RD621 viii Preface

9 Document Conventions The terms Universal Storage Platform V and Universal Storage Platform VM refer to all models of the Hitachi Universal Storage Platform V and VM storage systems, unless otherwise noted. This document uses the following typographic conventions: Convention Bold Italic Monospace < > angled brackets [ ] square brackets Indicates the following: Description Text in a window or dialog box, such as menus, menu options, buttons, and labels. Example: On the Add Pair dialog box, click OK. Text appearing on screen or entered by the user. Example: The -split option The name of a directory, folder, or file. Example: The horcm.conf file Indicates a variable, which is a placeholder for actual text provided by the user or system. Example: copy source-file target-file Indicates a screen text example (text appearing on screen or entered by the user). Example: # pairdisplay -g oradb Indicates a variable, which is a placeholder for actual text provided by the user or system. Example: # pairdisplay -g <group> Italic is also used to indicate variables. Indicates optional values. Example: [ a b ] indicates that you can choose a, b, or nothing. { } braces Indicates required or expected values. Example: { a b } indicates that you must choose either a or b. vertical bar Indicates that you have a choice between two or more options or arguments. Examples: [ a b ] indicates that you can choose a, b, or nothing. { a b } indicates that you must choose either a or b. underline Indicates the default value. Example: [ a b ] This document uses the following icons to draw attention to information: Icon Meaning Description Note Calls attention to important and/or additional information. Tip Caution WARNING Provides helpful information, guidelines, or suggestions for performing tasks more effectively. Warns the user of adverse conditions and/or consequences (e.g., disruptive operations). Warns the user of severe conditions and/or consequences (e.g., destructive operations). Preface ix

10 Convention for Storage Capacity Values Getting Help Physical storage capacity values (e.g., disk drive capacity) are calculated based on the following values: 1 KB = 1,000 bytes 1 MB = 1,000 2 bytes 1 GB = 1,000 3 bytes 1 TB = 1,000 4 bytes 1 PB = 1,000 5 bytes Logical storage capacity values (for example, logical device capacity) are calculated based on the following values: 1 KB = 1,024 (2 10 ) bytes 1 MB = 1,024 KB or 1,024 2 bytes 1 GB = 1,024 MB or 1,024 3 bytes 1 TB = 1,024 GB or 1,024 4 bytes 1 PB = 1,024 TB or 1,024 5 bytes 1 block = 512 bytes If you need to call the Hitachi Data Systems Support Center, make sure to provide as much information about the problem as possible, including: The circumstances surrounding the error or failure. The content of any error message(s) displayed on the host system(s). The content of any error message(s) displayed on Storage Navigator. The Storage Navigator configuration information (use the FD Dump Tool). The service information messages (SIMs), including reference codes and severity levels, displayed by Storage Navigator. The Hitachi Data Systems customer support staff is available 24 hours a day, seven days a week. If you need technical support, log on to the Hitachi Data Systems Portal for contact information: Comments Please send us your comments on this document: doc.comments@hds.com. Include the document title, number, and revision, and refer to specific section(s) and paragraph(s) whenever possible. Thank you! (All comments become the property of Hitachi Data Systems.) x Preface

11 1 Hitachi Storage Navigator Messages and s This chapter covers the various messages and error codes released by the storage system. Hitachi Storage Navigator Messages Message Window Format Remote Console-Storage Navigator s Hitachi Storage Navigator Messages and s 1-1

12 Hitachi Storage Navigator Messages Figure 1-1 shows a typical message window displayed by the Hitachi Storage Navigator for Hitachi Universal Storage Platform V and Hitachi Universal Storage Platform VM (hereafter referred to as USP V/VM) software. Figure 1-1 Sample Message Window (Information- Message) 1-2 Hitachi Storage Navigator Messages and s

13 Message Window Format Figure 1-2 illustrates the message window s format: [X] message-text (YYYY ZZZZZ) Figure 1-2 Message Window Format X indicates the message level. There are four message levels, as shown below. All USP V/VM system message panels display the following information: Message level: Information Warning Fatal error The server is unable to accept the request from Storage Navigator. One possible cause is that some process is in progress at the server. This message does not indicate an error. Message text: Descriptive text that appears in the message window. It may include variables %s (character string) and %d (numeral). The values of these variables are determined when processing is performed. Messages with a part code 60xx (where xx is a two-digit number) are TrueCopy for IBM z/os (TCz) or TrueCopy (TC) messages. This manual contains TCz messages only. If you are a TrueCopy user, note that: The word M-VOL in TCz messages is equivalent to P-VOL in TC messages. The word R-VOL in TCz messages is equivalent to S-VOL in TC messages. Part code: The ID of the application that issued the message. In Figure 1-1, the part code is 110. Message number: Decimal number within the range of 0000 to In Figure 1-1, the message number is If Storage Navigator starts and displays the following message, refer to the code and number the (YYYY ZZZZZ) represents. A check box may be indicated in the message window. If you check it the message will not appear until you login again. A network error occurred, the server is not ready, or an error occurred in the server. (YYYY ZZZZZ) Hitachi Storage Navigator Messages and s 1-3

14 Remote Console-Storage Navigator s To find solutions to the Hitachi Storage Navigator for USP V/VM errors, refer to Table 1-1 of this manual or the Troubleshooting chapter in the user guides for the program products causing the errors. Table 1-1 lists the error codes and error messages for Storage Navigator and provides recommended action for the error conditions. In some cases, the Recommended Action column may be blank. In these circumstances, the user should take actions based on instructions provided in the error message and based on what the user is trying to accomplish. Table 1-1 also provides the severity level and failure level of the error conditions. Severity s. The severity levels for the error codes are: i: Information E: W: Warning N: The server is unable to accept the request from Storage Navigator. One possible cause is that some process is in progress at the server. This message does not indicate an error. s. The failure levels for the error codes are: 0: No 1: Select MSG OK to end forcibly 2: All Refresh or Exit is valid only 3: All Refresh, Refresh, or Exit is valid and the buttons, other than the buttons of the functions in which the error occurred, are valid. 4: To make refresh possible 5: No status change 6: No change with refreshing automatically 7: Storage Navigator is automatically switched to view mode. If necessary, change the mode to Modify. 1-4 Hitachi Storage Navigator Messages and s

15 Table 1-1 s Part An error occurred during SVP please call A time-out error occurred. Please wait for the SVP to reboot, and then retry the The specified volume cannot be set as a command device or a component of a LUSE volume, because it is being used as a TrueCopy, ShadowImage, or Crosssystem Copy volume. Select another volume An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call The number of set operations exceeds the maximum (20000) An error occurred during SVP please call An error occurred during SVP please call An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support If this problem persists please call The SVP reboots automatically. If the same error occurs despite retrying, please call the Support If this problem persists please call Please reduce the number of set operations, and perform again. Input the correct user name and log in again. Input the correct password and log in again. Hitachi Storage Navigator Messages and s 1-5

16 The user ID is already logged in. Do you want to log in forcibly? Since the same user name is being used, log in with the other user name An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support Please call Please call Please call Please call An error occurred. If this problem persists, please call the Support A network error occurred. The probable cause is: - A timeout error occurred during communication with the SVP. The error occurs only in the internal process. Log on again. A network error may occur when the load of another application program working on the same PC with Storage Navigator is high. Increase the value of the RMI timeout period when network error occurs. E The number of clients logged on to the RMI server has exceeded 32. Log on again after a while The server configuration is invalid. Please call Failed to access the Config file. Please call Network error detected; exclusive lock is released. Lock is removed. Lock again An error occurred during SVP please call If the same problem persists despite retrying, please call the Support The user ID or password is invalid. Enter correct user ID or password An error occurred during SVP please call An error occurred during SVP please call The specified user ID is already logged on, or the previous logon was not properly terminated. Please try again later. (By default, the session/rmi time-out is one minute.) If the same problem persists despite retrying, please call the Support Log on with a different user ID. There is a possibility that the termination process in the previous log-on was invalid. (Terminated by clicking the end button of the browser.) After RMI Time-out (default 1 min.), log on again. W 2 E Hitachi Storage Navigator Messages and s

17 An error occurred during SVP please call An error occurred during SVP please call Since the SVP is busy, the monitoring data cannot be obtained. If the same problem persists despite retrying, please call the Support Wait a while, then retry. Do either of the following if two users are displaying the Performance Monitor window or running the Export Tool: Ask one of the users to display another window. Ask one of the users to log off. Wait for one of the users to quit the Export Tool. W An administrator is changing a system environment file. Please log on again after waiting for a while. Log on again after waiting a while. E Modify mode released due to inactivity. Do you want to get back to the Modify mode? An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call To get back to the Modify mode, click [OK]. Otherwise, click [Cancel]. If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support If the same problem persists despite retrying, please call the Support W 9 Hitachi Storage Navigator Messages and s 1-7

18 An error occurred during SVP please call If the same problem persists despite retrying, please call the Support The same user ID is already registered. Check the setting, and then retry the NULL or blank space(s) are used in the user ID. Check the setting, and then retry the The characters used for the user ID or the number of the characters of the user ID are invalid. Check the setting, and then retry the Specify another user ID. Enter a correct user ID. Enter a correct user ID The user name is not set. Check the setting, and then retry the An administrator cannot be added or deleted. Check the setting, and then retry the The password flag is invalid. Check the setting, and then retry the The password is invalid. Check the setting, and then retry the The specified permission flag is invalid. Check the setting, and then retry the The specified authority flag is invalid. Check the setting, and then retry the A file format error occurred. Check the setting, and then retry the An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call The user name is not set. Check the setting, then retry the Check the setting, then retry the The password flag is invalid. Check the setting, then retry the The password is invalid. Check the setting, then retry the The specified permission flag is invalid. Check the setting, then retry the The specified authority flag is invalid. Check the setting, then retry the A file format error occurred. Check the setting, then retry the 1-8 Hitachi Storage Navigator Messages and s

19 An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call If the same problem persists despite retrying, please call the Support A file open error has occurred. If the same problem persists despite retrying, please call the Support Failed to access the file. Check the setting, and then retry the If the same problem persists despite retrying, please call An error occurred during SVP please call Failed to access the file. Check the setting, then retry the If the same problem persists despite retrying, please call the Support An error occurred. If this problem persists, please call the Support No more users can be registered, because the number of registered users has reached the maximum. Reduce the number of users, and then retry the Delete unnecessary user accounts A network error occurred. The SVP is not ready, or an error occurred in the SVP The content of the management file of the audit log is invalid. Reboot the SVP PC and retry the request. If this problem persists, please call If the same problem persists despite retrying, please call the Support E 1 Hitachi Storage Navigator Messages and s 1-9

20 An error occurred during processing. The version of Storage Navigator may not match the version of destination SVP. Clear the cache of JRE and the browser, restart the browser, and then retry the processing. If this problem persists, the proxy server may be the cause of the problem. Please contact your network administrator. If your network does not have any problem, and this problem persists, please call the Support An error occurred during SVP please call An error occurred during server please call An error occurred during SVP please call Applying operation (operation of changing configuration) is in progress in the other SLPR. Applying operation (operation of changing configuration) cannot be performed simultaneously in the multiple SLPRs This function cannot be used by the storage partition administrator The available SLPR does not exist. Please contact the storage administrator and have the SLPR set The operation failed because the audit log is being processed. Please wait for a while, and then retry the The SVP is transferring the file to the FTP server. Wait for a while, then retry the Another user is downloading the file or transferring the file to the FTP server. Please wait for a while, and then retry the The Storage Navigator version may not match the version of the destination SVP. Clear the cache of JRE and close the browser, restart the browser, and then retry the processing. Storage Navigator is downloaded over your network and then executed. If this problem persists and you use a proxy server, the old version of the program could remain in the cache of the proxy. Contact your network administrator to clear the proxy cache. If that does not solve the problem and this problem persists, please call the Support Center for resolution. If the same problem persists despite retrying, please call the Support An error occurred during server please call Wait a while, then retry the Select another window. To set this function, please contact the storage administrator. Please contact the storage administrator and have the SLPR set. Wait a while, then retry the Wait for a while, then retry the Wait for a while, and then retry the E Transfer to the FTP server is disabled. Check the setting. Check the setting Hitachi Storage Navigator Messages and s

21 Failed to connect to the FTP server. Check the IP address, or the connection between the SVP and the FTP server. Check the IP address, or the connection between the SVP and the FTP server The file transfer to the FTP server failed. Check the user ID and the password. Check the setting The file transfer to the FTP server failed. Check the output folder and the status of the FTP server The file transfer to the FTP server failed. If this problem persists, please call The complete operation is performed to all SIMs related to Audit Log Complete operation of SIMs failed because the number of audit logs that had not been transferred exceeded the threshold The complete operation of the SIM may not have completed since the SVP is busy An invalid value is included in the management file of the audit log. Please retry the CVAE version information ID is invalid. Check the setting, and then retry the Check the output folder and the status of the FTP server. Complete operation of the SIM is not necessary. Transfer the audit logs that have not been transferred by FTP or download operation, then retry the If there are SIMs not completed, retry the If the same problem persists despite retrying, please call the Support CVAE version information ID is invalid. Check the setting, and then retry the The Login could not be performed because a function failed to start during SVP initialization. Please call Please call The operation failed because the SVP OS does not support IPv No more CVAE version information can be registered, because the number of registered CVAE version information reached the maximum. Reduce the number of CVAE version information and then retry the The specified LU path does not exist. Check the setting An error occurred during SVP please call Use the IPv4 FTP server. If you want to use the IPv6 FTP server, please contact Support No more CVAE version information can be registered, because the number of registered CVAE version information reached the maximum. Reduce the number of CVAE version information and then retry the The configuration information has already been changed. Check the setting and make the settings for the configuration information again. Hitachi Storage Navigator Messages and s 1-11

22 An error occurred during SVP please call The SVP is busy. Wait for a while, then click [Refresh All] on the File menu and refresh the configuration An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call Click [Refresh All] on the File menu and refresh the configuration. If nothing changes despite retrying, please call W The server configuration is invalid. Please call Please call An error occurred during SVP please call An error occurred during SVP please call An error occurred. If this problem persists, please call the Support Array is refreshing, or the settings by the user are registered. Please retry after a while. Retry after a while. N A connection error has occurred. Retry the same If the same error occurs despite retrying, please call An error occurred during SVP please call 1-12 Hitachi Storage Navigator Messages and s

23 An error occurred during SVP please call The number of requests exceeds the maximum number that can be processed. Reduce the number of requests and retry the A sequence error occurred. Please call the developer of the client program The disk subsystem is in internal process, or some other user is changing the configuration. Wait a while, then click [Refresh] on the File menu, or wait a while and login again You cannot delete paths and host groups at the same time An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call Reduce the number of requests and retry the Connection is terminated from the server due to the network failure, etc. Log on again. This error might occur and remain internally in the unlock function log when a user in View mode selects the Exit button, but this is not a problem. In other cases, please call the Support Wait a while, then click [Refresh] on the File menu, or wait a while and login again. Delete paths and host groups separately. W Now processing. Please wait a while, and then retry the Log in again after a while. Hitachi Storage Navigator Messages and s 1-13

24 The SVP is busy. Please wait for a while, and then retry the An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call Another user has lock, please try again later An error occurred during SVP please call An error occurred during SVP please call This function cannot be used by the storage partition administrator Because the settings across the multiple SLPRs are contained, the authority has been shifted to the storage administrator from the storage partition administrator. To continue the operation, please contact the storage administrator. To perform other operations, select a function button The resources of other SLPR(s) cannot be accessed An error occurred in the disk subsystem. The configuration may be inconsistent. Please select [All Refresh] and refresh the configuration. If the same problem persists despite retrying, please call the Support Another user is accessing with Modify mode. Wait a while and retry. Select another window. To set this function, please contact the storage administrator. To continue the operation, please contact the storage administrator and have the settings across the multiple SLPRs cancelled, then retry the To perform other operations, select a function button. Correct the settings, then retry the Click [All Refresh] and refresh the configuration. W The Login could not be performed because a function failed to start during SVP initialization. Please call Please call 1-14 Hitachi Storage Navigator Messages and s

25 You are trying to set multiple paths to the same volume from one group Multiple volumes are specified to a single port, group or LUN combination The emulation type of the volumes combined into a LUSE volume is not for open systems An error occurred during SVP please call An error occurred. If this problem persists, please call the Support LU path is set to a volume which links as an expanded LU The emulation types of the volumes combined into a LUSE volume are not the same LU path is set to the releasing expanded LU. (You need to release the expanded LU and path at the same time.) An error occurred. If this problem persists, please call the Support The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The volume that links as an expanded LU extend over CU#. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The emulation type of a volume that links as an expanded LU is not the same. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The specified port does not exist. You have specified a wrong port number. Or the specified port type (exclusively for mainframe) cannot be processed in this agent. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call Hitachi Storage Navigator Messages and s 1-15

26 An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support The specified LU path does not exist The specified value of the command device setting is invalid. Check the setting The number of volumes you intend to combine into a LUSE volume exceeds the maximum. LUN is invalid. (The specified value is not in the specification.) The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call The specified volume does not exist. (You have specified wrong CU#:LDEV#) Or the LDEV (exclusively for mainframe) cannot be processed in this agent. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call Host mode is invalid. (The specified value is not in the specification.) The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call Fibre topology information is invalid. (The specified value is not in the specification.) The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The specified value of the command device setting is invalid. (The specified value is not in the specification.) The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support The configuration information has been already changed. Check the settings and request the setting of the configuration information again Hitachi Storage Navigator Messages and s

27 An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call The specified extent is over the size which can be specified An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call The free space remaining in the parity group is not enough to install a customized volume (CV) The specified emulation type of the customized volume (CV) is a type that cannot be combined An error occurred during SVP please call An error occurred during SVP please call The CU number and the LDEV number set in the VLL operation are the same as those of other volumes An error occurred during SVP please call Set the extent area within the size which can be specified, then retry the There is no capacity left in the logical parity group to create CV. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call The specified emulation type of CV cannot coexist. There is no capacity left in the logical parity group. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call Check and correct the settings. If Volume Initialize and Make Volume are specified at the same time, operate them separately. Hitachi Storage Navigator Messages and s 1-17

28 An error occurred during SVP please call An error occurred during SVP please call The specified Subsystem ID already exists. Specify another SSID An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred. If this problem persists, please call the Support Security Switch Off operation and path adding operation cannot be performed simultaneously. Check the current configuration and then make settings again An error occurred during SVP please call The specified WWN is already in use. Specify another WWN You are trying to register the same WWN as the already registered one. Please check the settings and request the setting of the configuration information again The specified host name or the host group name is already registered. (The host name and the host group name cannot be the same.) Correct the specified content, and issue the request again. You are trying to perform LUN Manager operation for non-fibre port. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support First, add paths, then click Apply. Next, turn off the security switch, then click Apply. Correct the specified contents, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. Correct the specified contents, and request the setting of the configuration information again Hitachi Storage Navigator Messages and s

29 WWN number, which is not registered, is specified. (When deleting, or changing) You are trying to register the same host group number as the already registered one The specified host group has not been registered An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call Volume initialization operation cannot include the last LDEV of RAID striping group An error occurred during SVP please call An error occurred during SVP please call An error occurred during SVP please call An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support The specified volume is currently used by Compatible PAV and is not available for VLL The configuration information has been already changed. Check the settings and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. Since at least one LDEV is required in the parity group, you cannot uninstall anymore. A nickname is not specified when the configuration change of LUN Manager is requested. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support Change the volumes to create a CV via the VLL Next, retry the VLL setting. Hitachi Storage Navigator Messages and s 1-19

30 An error occurred. If this problem persists, please call the Support Command device security cannot be set to the specified volume because the volume is not a command device The command device setting and the command device security setting are incorrect. You cannot do any of the following to the same volume: - Specify the volume as a command device and disable command device security on the volume. - Specify the volume as a noncommand device and enable command device security on the volume There are no host groups where the WWN will be registered A volume set as a command device cannot be used as a component of a LUSE volume. Select another volume An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support You have not specified the value when registering WWN. Or zero is set as the WWN value. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The setting method of command device/command device security is incorrect. The following settings are invalid. 1. Set command device + Release command device security 2. Release command device + Set command device security The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. Correct the specified contents, and request again. CHA high-speed mode is specified to unmounted CHA. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support A request has been made to change to a channel speed that the Fibre PCB does not support. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call 1-20 Hitachi Storage Navigator Messages and s

31 An error occurred. If this problem persists, please call the Support You cannot specify the default nickname when setting the nickname of a host group or a host No more host groups can be set, because the number of host groups has reached the maximum (254) that can be set in a port Failed to set the WWN because the number of WWNs exceeds the maximum that can be set in a port Failed to set the host mode because the number of host modes exceeds the maximum that can be set in a port Failed to set the path because the number of paths exceeds the maximum that can be set in a port An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support Failed to form a LUSE volume because the number of LUSE volumes exceeds the maximum that can be set in a disk array subsystem. When the WWN is registered in LUN Manager, the number of WWNs you can register is exceeded. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support Correct the specified contents, and request again. No more host groups can be set, because the number of host groups has reached the maximum (254) that can be set in a port. Reduce the number of host groups, then retry the The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has already been changed. Check the settings, and request the setting of the configuration information again. The configuration information has already been changed. Check the settings, and request the setting of the configuration information again. When PORT information (Fibre Address/Fibre Topology/Channel Speed) is set, multiple change instructions are set to the same PORT. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support When CHA high-speed mode is set, multiple change instructions are set to the same PORT. The error does not occur normally because it cannot be modified in the window. In the unlikely event that this error occurs, please call the Support The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. Hitachi Storage Navigator Messages and s 1-21

32 An error occurred. If this problem persists, please call the Support An error occurred. If this problem persists, please call the Support Because the Port Group setting is done, it is impossible to change. Please release the Port Group setting Processing in progress. Please wait for a while, and then retry the Release the Port Group setting. Log in again after a while. W An error occurred during SVP processing. If this problem persists please call An error occurred during SVP processing. If this problem persists please call An error occurred during SVP processing. If this problem persists please call An error occurred during SVP processing. If this problem persists please call The volume cannot be configured as a command device because the volume does not have Read/Write attribute Failed to set the host because the number of hosts exceeds the maximum that can be set in a port The specified host ID is already registered The specified host is already registered An incorrect host name was specified A non-registered host was specified. Correct settings, then retry. Correct the settings, then retry. Correct the settings, then retry. Correct the settings, then retry. Correct the settings, then retry. Correct the settings, then retry An error occurred. If this problem persists please call the Support The specified path cannot be added, because the volume is used by a Remote Copy pair An error occurred. If this problem persists please call the Support The port information is inconsistent with PCB mode information. If this problem persists please call Correct the specification, then retry the If this problem persists please call Correct the port information or the PCB mode information. W Hitachi Storage Navigator Messages and s

33 You are trying to insert in the linkage operation including LUSE. (LDEV number is inserted to the LDEV numbers created in LUSE) In the linkage operation including LUSE, the path is specified to other than the top You cannot expand the LU because the host mode of the group with paths which are defined in the LU is corresponding to online LUSE. The configuration information has already been changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again No information can be changed about this external port because the port has an external volume You cannot set high-speed mode to a package including an external port. Correct the settings, then retry. Correct the settings, then retry The selection of High Speed mode/mix mode is invalid. The specified port cannot be changed to High Speed mode/mix mode High Speed mode/mix mode was specified. However, there are addresses to which High Speed mode/mix mode cannot be set in the Fibre Addresses of the specified ports High Speed mode/mix mode was specified. However, there are topologies to which High Speed mode/mix mode cannot be set in the topologies of the specified ports S-VOLs remain on the Fibre-RCU port. This operation may cause a fatal damage to the S-VOLs. Please stop this If you want to continue this operation, please remove the S-VOLs from the RCU port first Cache Residency cannot be set to the specified volume because the IO Suppression mode is set to Enable Cache Residency cannot be set for this volume because its Cache mode is set to Disable. Change the parameter to a path where the High Speed mode/mix mode can be set, then retry the The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The configuration information has been already changed. Check the settings, and request the setting of the configuration information again. The specified Port is for Fibre TrueCopy. Delete a logical path, then retry the Disable the IO Suppression mode of this volume, then retry the operation, or remove the volume from the volumes to be set. Enable the Cache mode of this volume, then retry the operation, or remove the volume from the volumes to be set. Hitachi Storage Navigator Messages and s 1-23