Tutorial : First board in CircuitMaker.
|
|
|
- Howard Mark Evans
- 5 years ago
- Views:
Transcription
1 Tutorial : First board in CircuitMaker. Objectives 1. Create a new project in CircuitMaker. 2. Design electronic circuit in CircuitMaker schematic editor. 3. Design a pcb board for your circuit in CircuitMaker PCB editor. 4. Configure manufacturing output files and release project. Step 1: Create a new project 1. Use Start button on Home ribbon to open TASKS navigation panel. 2. Click on New Project under Projects drop down menu.
2 3. In the Add Project dialog, type in project name: 555 Flashing Led. Click Save button.
3 4. On the Edit Project page click Save button. 5. On the 555 Flashing Led project page click Open Design button. 6. The 555 Flashing Led project is opened in CircuitMaker. Step 2: Add a new schematic document to the project 1. Click on Project button on Home ribbon and select Add new Schematic item.
4 2. Type in file name for the schematic document. Click OK. 3. The schematic document is added to the project and the schematic editor is ready.
5 Step 3: Add components to the schematic. 1. On View ribbon click on Libraries button to open the Libraries panel. 2. In the Libraries panel, type in TLC555CP in the search field and hit Enter. Under Revisions scroll down and select revision 8. The name of the revision will end with -8. Correct component revision is CMP-d8c011cae97e With the revision 8 selected, click Place button.
6 3. With component under mouse cursor move to the center of schematic document. Left click to place symbol on schematic. Tip: CircuitMaker will stay in component placement mode after placing first symbol. To
7 exit component placement mode hit ESC key. If you accidentally place more than one component, exit placement mode first and then left click on component you would like to remove from schematic and hit DEL key. 4. In the Libraries panel search for RNF14FTD100K resistor. Select revision -10.
8 5. Place two resistors to the left of the 555 timer symbol. Tip 1: When you pick this resistor from the Libraries panel, component will be rotated horizontally. Before you place first instance hit SPACE key to rotate component counter-
9 clockwise. Tip 2: You can zoom in and zoom out in the schematic editor view with the PageUp and PageDown keys. 6. In the Library panel search for ESH106M050AC3AA and select revision 1.
10 7. Place the capacitor below the resistors. Notice this is a polarized capacitor and the positive terminal should face up. Use SPACE key to rotate the symbol if necessary.
11 8. In the Libraries panel search for WP710A10ID and select revision 9.
12 9. Place the LED to the right of the 555 timer. Rotate the symbol with the SPACE key.
13 10. In the Libraries panel search for Keystone 1026 and select revision 6.
14 11. Place the battery holder to the right of the LED. Use SPACE key to rotate the symbol and place it with the positive terminal facing up.
15 12. On Home ribbon click on Power Port button and from the drop down list select GND symbol. 13. Place the GND symbol below the GND pin on the 555 timer symbol. 14. All components are on your schematic!
16 Step 4: Wire schematic. 1. On Home ribbon click on Wire button. 2. Left click on end of the GND pin on the 555 timer symbol. This will begin placing the wire on your schematic. Tip: When you hover mouse over the pin, CircuitMaker will change mouse cursor to a red crosshair to indicate best place to begin wiring.
17 3. Left click on top of the GND power port. This will end wire on schematic completing electrical connection between the GND pin on the 555 timer symbol and the power port.
18 4. When last connection point is made, hit ESC key to exit wire placement mode.
19 5. Use wire tool to finish wiring the circuit. Tip: When in the wire place mode, use SHIFT + SPACE keys to toggle between different placement modes. Use SPACE key to change submodes. Look at the status bar at the bottom where information about current place mode is displayed.
20 6. On Tools ribbon click on Annotate button and select Annotate Schematics Quietly item. 7. CircuitMaker will check how many designators need to be updated. Click Yes. 8. All designators on schematic are updated now.
21 9. On Home ribbon click on Project button and from drop down menu select Compile. 10. CircuitMaker will list all compilation issues in the Messages panel that you can open on View ribbon.
22 Step 5: Save project. 1. On Home ribbon click Project button and select Commit Project from drop down menu. 2. CircuitMaker will remind about saving documents before committing project. Click Yes.
23 3. Ensure all documents are selected, type in comment and click OK button. 4. When project is committed, all project files will show up to date status.
24 Step 6: Add PCB document to the project. 1. On Home ribbon click on Project button and select Add new PCB from the drop down list. 2. Type in pcb document name and click OK. 3. CircuitMaker will add new pcb document to the project and will open it in the PCB editor.
25 Step 7: Import components from schematic document and place them on the board. 1. On Home ribbon click on Project button and select Import Changes From 555 Flashing Led.PrjPcb item.
26 2. In the Engineering Change Order dialog click on Execute Changes button. 3. When importing process finishes, click on Close button. 4. All components imported from the project will be placed in the bottom right corner of the PCB editor s workspace. Tip 1: You can zoom in/out in the PCB editor with PageUp / PageDown keys. Tip 2: You can hold down CTRL key and use mouse wheel to zoom in/out Tip 3: You can hold down both the CTRL key and the right mouse button while moving mouse up or down to zoom in/out. This specific combination is using mouse gestures. Tip 4: Use CTRL + PageDown keys to set zoom level automatically to see all components at once.
27 Tip 5: Right click anywhere in the PCB editor workspace and from popup menu pick View -> Fit Board to set zoom level to see the whole board. Tip 6: You can PAN view around by holding down right mouse button and moving the mouse. 5. Left click on the BT1 component and while holding down the left mouse button drag it to the left of the board area. Release the mouse button to drop component in new location.
28 4. Move the C1 component closer to the BT1. While dragging component, CircuitMaker will draw thin lines showing electrical connections between the C1 and other components. Before you release the left mouse button you can rotate component to ease routing. Use the SPACE key to rotate component while moving it. Notice in the picture the C1 component is rotated so the negative terminal is facing up. 5. Move the U1 component closer to the C1 capacitor. Then move the R2 to the right of the U1 component. Rotate it before placing to ease routing later on. The screenshot shows electrical connections just before the component was placed on the board. Use the SPACE key to rotate component while dragging it.
29 6. Move other components closer to each other. Step 8: Define board shape. 1. On Home ribbon click on Board Shape button and select Edit Board Shape from the drop down menu.
30 2. Move the mouse cursor over the edge of the board shape in between defined vertices. Mouse cursor will change to indicate that you can drag board edge to a new location
31 3. Left click on the board edge and while holding down the left mouse button drag it down closer to the components. Release the mouse button when you are there.
32 4. Move other board edges to define new board shape. 5. When you are done, left click anywhere in the PCB editor workspace. The board will appear in edit mode
33 6. On Home ribbon click on Board Shape button and select Create Primitives From Board Shape. 7. In the Primitives From Board Shape dialog type in Width 10 mil and change Layer to Outline. Click OK button.
34 8. The board will have the outline defined. Default color is blue as indicated on the Outline Tab Step 9: Route connections. 1. On Home ribbon click on Route button.
35 2. With the Interactive Routing Tool selected, left click in the middle of the BT1 component pad. The mouse cursor will change to a small circle to indicate where is the best snap point to start the track. 3. While in the interactive routing tool, the PCB editor will mask out all objects that are not electrically connected to the track you are placing.
36 4. While placing the track look at the bottom status bar. It will show information about the current interactive router tool mode. Tip 1: You can toggle between different router modes with the SHIFT + SPACE keys. Tip 2: You can toggle submodes with the SPACE key. Tip 3: When routing not in straight line, you can commit only current track segment and stay in the interactive router mode to place next segment. Left click where you want the track segment to end. Tip 4: To exit interactive router tool use ESC key. 5. Make connection between the BT1 pad and the C1 pad.
37 6. Route the rest of the board. 7. On Home ribbon click on Project button and select Commit from the drop down list. Type in comment and click OK button
38 Step 10: View board in 3D 1. While in the PCB editor hit key 3.
39 8. In the 3D view, hold down the SHIFT key. The mouse cursor will change to give you rotation controls. Tip : While holding down the SHIFT key, hold down the right mouse button and move the mouse around. That s how you rotate the board.
40 9. Rotated board 10. Tips while looking at the board in the 3D view.
41 Tip 1: Key 0 will center the board. Tip 2: Key 9 will flip it by 90 degrees. Tip 3: You can flip board by clicking on Flip Board button on View ribbon. Tip 4: Zooming in and out is the same as in the 2D view. 11. Use key 2 to return to the 2D view. Step 11: Configure manufacturing outputs and release project. 1. On Home ribbon click on Project button and select Release Project from the list. 2. In the Project Release dialog enable outputs.
42 3. Click on Configure link next to the Bill of Materials
43 4. In the Grouped Columns left click on Comment column and while holding down the left mouse button drag it down to the All Columns list. Release mouse button to drop it there.
44 5. In the All Columns field scroll down to Footprint and LibRef. Disable both from the report.
45 6. In the All Columns enable Manufacturer Part Number parameter. The Manufacturer Part Number column will appear in the report. 7. Enable Include Parameters From PCB option.
46 8. In the All Columns scroll down to the PCB parameters. Enable Center-X(Mil), Center- X(mm), Center-Y(Mil), Center-Y(mm), Layer and Rotation. Corresponding columns will appear in the report. 9. You can change output format in the File Format drop down list. Microsoft Excel Worksheet is a widely accepted format for the BOM. When ready click OK button.
47 10. In the Project Release dialog click on Configure next to the Gerber Files.
48 11. In the Gerber Setup dialog on General tab set Units to Inches, change Format to 2:5 12. In the Gerber Setup dialog on Layers tab use Plot Layers drop down menu and select Used On. This enables all used layers from the design to be outputted for manufacturing.
49 13. In the Gerber Setup Dialog on Drill Drawing tab enable Plot all used layer pairs for both the Drill Drawing Plots and the Drill Guide Plots.
50 14. In the Gerber Setup dialog on Apertures tab enable Embedded apertures (RS274X) option.
51 15. In the Gerber Setup dialog on Advanced tab select Suppress leading zeroes option for the Leading/Trailing Zeros option and select Reference to absolute origin for the Position on Film option. Click on OK button when ready.
52 16. In the Project Release dialog click on Configure next to the NC Drill Files.
53 17. In the NC Drill Setup dialog change Units to Inches, change Format to 2:5. Select Suppress leading zeroes for the Leading/Trailing Zeroes option and choose Reference to absolute origin for the Coordinate Positions. Tip : The NC Drill Setup is related to the Gerber Setup and in most cases your PCB manufacturing house will ask you to set these options in both outputs identically. We do it this way in the tutorial as well. Click OK button when ready.
54 18. In the Project Release dialog click on Release button.
55 19. CircuitMaker will run all necessary outputters to produce manufacturing files. During the process it will show status for each kind of output it needs to generate. Wait for the Release Summary dialog to open.
56 20. When all manufacturing outputs are produced the Release Summary dialog opens up automatically. Click CLOSE button.
57 21. Your design is released and in the Project panel in CircuitMaker you will notice all Generated outputs are automatically added in during the process.
58 Summary Congratulations! You have designed and released for manufacturing your first PCB board in CircuitMaker. You can use your web browser to navigate to your user profile page on and download the zip file that includes all manufacturing files that you would like to send out for production.
59
TUTORIAL SESSION Technical Group Hoda Najafi & Sunita Bhide
TUTORIAL SESSION 2014 Technical Group Hoda Najafi & Sunita Bhide SETUP PROCEDURE Start the Altium Designer Software. (Figure 1) Ensure that the Files and Projects tabs are located somewhere on the screen.
Schematic Editing Essentials
Summary Application Note AP0109 (v2.0) March 24, 2005 This application note looks at the placement and editing of schematic objects in Altium Designer. This application note provides a general overview
2008 년안산일대디지털정보통신학과 CAD 강의용자료 PADS 2007
2008 년안산일대디지털정보통신학과 CAD 강의용자료 PADS 2007 1 Learning the PADS User Interface What you will learn: Modeless Commands Panning & Zooming Object Selection Methods Note: This tutorial will use PADS Layout to
From Idea to Manufacture - Driving a PCB Design through CircuitStudio
From Idea to Manufacture - Driving a PCB Design through CircuitStudio Modified by Susan Riege on 13-Sep-2018 Welcome to the world of electronic product development in Altium's world-class electronic design
Introduction to PCB Design with EAGLE. Jianan Li
Introduction to PCB Design with EAGLE Jianan Li Install EAGLE Download EAGLE: http://www.cadsoftusa.com/download-eagle/ Choose Run as Freeware during installation Create a New Project Launch EAGLE and
Getting Started with PCB Design
Getting Started with PCB Design Summary Tutorial TU0117 (v1.2) April 13, 2005 This introductory tutorial is designed to give you an overview of how to create a schematic, update the design information
Introduction to NI Multisim & Ultiboard
George Washington University School of Engineering and Applied Science Electrical and Computer Engineering Department Introduction to NI Multisim & Ultiboard Dr. Amir Aslani 8/20/2017 2 Outline Design
Exercise 1. Section 2. Working in Capture
Exercise 1 Section 1. Introduction In this exercise, a simple circuit will be drawn in OrCAD Capture and a netlist file will be generated. Then the netlist file will be read into OrCAD Layout. In Layout,
From Idea to Manufacture - Driving a PCB Design through SOLIDWORKS PCB
From Idea to Manufacture - Driving a PCB Design through SOLIDWORKS PCB Modified by Jason Howie on 24-Oct-2017 Welcome to the world of electronic product development in Altium's world-class electronic design
Tutorial - Getting Started with PCB Design
Tutorial - Getting Started with PCB Design Old Content - visit altium.com/documentation Modified by Phil Loughhead on 3-Aug-2016 Welcome to the world of electronic product development environment in Altium
- create new schematic to the new project, PCB design begins with a schematic diagram, which present how components are connected
Eagle 8.x tutorial - create a new project, Eagle designs are organized as projects - create new schematic to the new project, PCB design begins with a schematic diagram, which present how components are
Complete Tutorial (Includes Schematic & Layout)
Complete Tutorial (Includes Schematic & Layout) Download 1. Go to the "Download Free PCB123 Software" button or click here. 2. Enter your e-mail address and for your primary interest in the product. (Your
Creating a PCB Design with OrCAD PCB Editor
Creating a PCB Design with OrCAD PCB Editor This guide is focused on learning how to create a PCB (Printed Circuit board) design. The guide will make use of the PCB Flow menu that is part of this workshop
CADSOFT EAGLE TUTORIAL
CADSOFT EAGLE TUTORIAL IEEE OPS 2013-2014 By Shubham Gandhi, Kamal Kajouke 1 Table of Contents 1. Introduction 1.1 Getting Started 1.2 Eagle Schematic Editor 1.3 The Toolbar and Command Bar 1.4 Importing
Design capture, simulation and layout - an introduction Tutorial
Design capture, simulation and layout - an introduction Tutorial A step-by-step introduction to Altium s complete board-level design system 1 Software, documentation and related materials: Copyright 2002
Orcad Layout Plus Tutorial
Orcad Layout Plus Tutorial Layout Plus is a circuit board layout tool that accepts a layout-compatible circuit netlist (ex. from Capture CIS) and generates an output layout files that suitable for PCB
To learn more about a command, dialog, object or panel, press F1 when the cursor is over that item.
Published on Online Documentation for Altium Products (https://www.altium.com/documentation) 主页 > 从理念到制造 通过Altium Designer推动PCB设计 Altium技术文档新纪元 Modified by Jun Chu on Apr 26, 2018 Welcome to the world
Experiment 1 Electrical Circuits Simulation using Multisim Electronics Workbench: An Introduction
Experiment 1 Electrical Circuits Simulation using Multisim Electronics Workbench: An Introduction Simulation is a mathematical way of emulating the behavior of a circuit. With simulation, you can determine
Introduction Creating a Project Footprint Design
EEC 134 Application Note Introduction to PCB Design Cameron Vossoughi Introduction Being fluent in PCB design is essential for electrical engineers regardless of their discipline focus. This application
Table of Contents. Part I Introduction. Part II Creating a simple Schematic and PCB. Part III Creating Libraries.
TUTORIAL 2 DipTrace Tutorial Table of Contents Part I Introduction 4 Part II Creating a simple Schematic and PCB 4 1 Establishing a... schematic size and placing titles 5 2 Configuring libraries... 8 3
Board Options. Modified by Phil Loughhead on 27-Jan Parent page: PCB Dialogs. Old Content - visit altium.com/documentation
Board Options Old Content - visit altium.com/documentation Modified by Phil Loughhead on 27-Jan-2016 Parent page: PCB Dialogs The Board Options Dialog. Summary Board Options dialog allows the designer
A Guide to Autodesk Maya 2015
A Guide to Autodesk Maya 2015 Written by Mitchell Youngerman Table of Contents Layout of Toolbars...pg 1 Creating Objects...pg 2 Selecting & Deselecting Objects...pg 3 Changing Perspective... pg 4 Transforming
Exercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
K e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
PCB Design View. Contents
PCB Design View Contents Placing a Design View Defining the View Area Setting the Location and Scale of the Design View Defining the Title Interactively adjusting the Scale, Size and Focus of the Design
Lesson 5: Board Design Files
5 Lesson 5: Board Design Files Learning Objectives In this lesson you will: Use the Mechanical Symbol Editor to create a mechanical board symbol Use the PCB Design Editor to create a master board design
1 General Principles. General Principles. In this chapter 1-1
1 General Principles In this chapter 1 General Principles 1.1 User Interface 1.2 Title bar 1.3 Menu bar 1.4 Standard Toolbar 1.5 The drawing area 1.6 Component tabs 1.7 Status Bar 1.8 Manipulating Components
Personalize your pen with a color ring
Work with your pen All pen tablets and pen displays include a cordless, battery-free pen that you use to interact with your device. You can hold, write, and draw as you normally would with a pen or pencil.
Apex Sketch v7. Define First
Apex Sketch v7 Legacy Draw First Drawing Method Define First Apex Sketch Version 7 Define First Apex Sketch Version 7 uses the same keystrokes as you would use traditionally in any other Apex program.
MET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
SolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
Click on the SwCAD III shortcut created by the software installation.
LTSpice Guide Click on the SwCAD III shortcut created by the software installation. Select File and New Schematic. Add a component Add a resistor Press R or click the resistor button to insert a resistor.
Pads are used to provide both mechanical mounting and electrical connections to the component pins.
Pad Old Content - visit altium.com/documentation Modified by Jason Howie on 19-Aug-2015 Parent page: Objects Pads are used to provide both mechanical mounting and electrical connections to the component
Lesson 1: Getting Started with OrCAD Capture
1 Lesson 1: Getting Started with OrCAD Capture Lesson Objectives Discuss design flow using OrCAD Capture Learn how to start OrCAD Capture The OrCAD Capture Start Page Open an existing Project Explore the
Lesson 5: Creating Heterogeneous Parts
Lesson 5: Creating Heterogeneous Parts Lesson Objectives After you complete this lesson you will be able to: Create a Heterogeneous part Annotate a Heterogeneous part (Optional) Heterogeneous Parts A heterogeneous
PREZI QUICK START GUIDE
PREZI QUICK START GUIDE What is Prezi? On a mission to end boring presentations and make you a great presenter, Prezi is presentation software, which, unlike slides that literally box you in, lets you
Questions? Page 1 of 22
Learn the User Interface... 3 Start BluePrint-PCB... 4 Import CAD Design Data... 4 Create a Panel Drawing... 5 Add a Drill Panel... 5 Selecting Objects... 5 Format the Drill Panel... 5 Setting PCB Image
Fall Leaves Andrea Mattina
Fall Leaves Andrea Mattina Before starting this project, we need to make sure we are working in millimeters. To change to millimeters, select View from the menu bar and scroll down to View Preferences.
Autodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
Generating a Custom Bill of Materials
Generating a Custom Bill of Materials Old Content - visit altium.com/documentation Modified by on 6-Nov-2013 This tutorial describes how to use the Report Manager to set up a Bill of Materials (BOM) report.
KiCad Example Schematic ( ) Wien Bridge Oscillator
KiCad Example Schematic (2010-05-05) Wien Bridge Oscillator University of Hartford College of Engineering, Technology, and Architecture The following tutorial in that it walks you through steps to use
User Interface Guide
User Interface Guide 1 Contents Overview... 3 Tabmenu... 4 Design modes... 4 Tool groups... 5 Design function groups... 5 Main menu... 6 Toolbars... 7 Drawing area... 9 Status bar... 11 Coordinate box...
Cycle through three routing modes (ignore, avoid or push obstacle) Toggle electrical grid on/off
PCB Editor Shortcuts Old Content - visit altium.com/documentation Modified by on 13-Sep-2017 Parent article: Shortcut Keys PCB Editor Shortcuts + E + B + PAGE UP + PAGE DOWN Cycle through three routing
Word 2016 Tips. Rylander Consulting
Word 2016 Tips Rylander Consulting www.rylanderconsulting.com sandy@rylanderconsulting.com 425.445.0064 Word 2016 i Table of Contents Screen Display Tips... 1 Create a Shortcut to a Recently Opened Document
Create a Scrolling Effect in PowerPoint 2007
Create a Scrolling Effect in PowerPoint 2007 You have a large image, document, etc. that you d like to show in your presentation and you d like to be able to scroll through it with the ability to control
Bungard Elektronik. IsoCAM 2.0
Bungard Elektronik IsoCAM 2.0 IsoCAM Version 2.0 Copyright Bungard Elektronik Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious
Creating a T-Spline using a Reference Image
1 / 17 Goals Learn how to create a T-Spline using a Reference Image. 1. Insert an image into the workspace using Attach Canvas. 2. Use Calibrate to set the proper scale for the reference image. 3. Invoke
DipTrace Tutorial Table of Contents Part I Introduction Part II Creating a simple Schematic and PCB
TUTORIAL 2 DipTrace Tutorial Table of Contents Part I Introduction 4 Part II Creating a simple Schematic and PCB 4 1 Establishing... schematic size and placing titles 5 2 Configuring... libraries 9 3 Designing...
Editing Multiple Objects. Contents
Editing Multiple Objects Contents Selecting Multiple Objects Inspecting the Objects Editing the Objects Editing Group Objects Step 1. Selecting the Capacitors Step 2. Changing the Comment String Step 3.
MDA Electronics. IsoCAM 2.0
MDA Electronics IsoCAM 2.0 IsoCAM Version 2.0 Copyright MDA Electronics Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious
University of Kansas EECS Circuit Board Fabrication Tutorial for 212 Lab
University of Kansas EECS Circuit Board Fabrication Tutorial for 212 Lab Preparing For Export... 1 Assigning Footprints... 1 Recommended Footprints... 2 No Connects... 3 Design Rules Check... 3 Create
Acrobat X Professional
Acrobat X Professional Toolbar Well Page Navigations/Page Indicator Buttons for paging through document Scroll Bar/box page indicator appears when using the scroll button to navigate. When you release
239 Excel Keyboard Shortcuts
239 Excel Keyboard Shortcuts WORK FASTER AND MORE EFFICIENTLY WITH THESE CLEARLY ILLUSTRATED EXCEL SHORTCUTS. My Online Training Hub https://www.myonlinetraininghub.com/ Below is a huge list of Excel keyboard
Profile Modeler Profile Modeler ( A SuperControl Product )
Profile Modeler ( A SuperControl Product ) - 1 - Index Overview... 3 Terminology... 3 Launching the Application... 4 File Menu... 4 Loading a File:... 4 To Load Multiple Files:... 4 Clearing Loaded Files:...
SolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF Mastercam Training Guide Objectives You will create the geometry for Lathe-Lesson-1, and then generate a toolpath to machine the part on a CNC
This section contains a tutorial that introduces you to Multisim and its many functions.
GETTING STARTED GUIDE NI Circuit Design Suite This document contains the following step-by-step tutorials: Multisim Tutorial Multisim is the schematic capture and simulation program designed for schematic
Construction of Industrial Electronic Equipments
VSB-Technical university of Ostrava Faculty of Electrical Engineering and Computer Science Department of electronics Construction of Industrial Electronic Equipments Syllabus Part 2 PCB Design and Fabrication
5 When creating a Thermal Pad you should determine the size of your WebClear (Air-Gap) first, usually 10 th (mils) would have been sufficed.
APPENDIX A SMD AND MULTI-LAYERED PAD Creating SMD Pad and Multi-Layered Pad are generally the same as the pads that you create in Lab 3 with only a slight difference in layer assignment. Multi-Layered
Working with the Board Insight System
Working with the Board Insight System Old Content - visit altium.com/documentation Modified by on 29-Jul-2014 Board Insight is a configurable system of features that give you complete control over viewing
The Rectangular Problem
C h a p t e r 2 The Rectangular Problem In this chapter, you will cover the following to World Class standards: The tools for simple 2D Computer Aided Drafting (CAD) The Command Line and the Tray The Line
Tutorial 3: Using the Waveform Viewer Introduces the basics of using the waveform viewer. Read Tutorial SIMPLIS Tutorials SIMPLIS provide a range of t
Tutorials Introductory Tutorials These tutorials are designed to give new users a basic understanding of how to use SIMetrix and SIMetrix/SIMPLIS. Tutorial 1: Getting Started Guides you through getting
PARTS OF A WORKSHEET. Rows Run horizontally across a worksheet and are labeled with numbers.
1 BEGINNING EXCEL While its primary function is to be a number cruncher, Excel is a versatile program that is used in a variety of ways. Because it easily organizes, manages, and displays information,
Radial Diameter Dimension. Contents
Radial Diameter Dimension Contents Description Availability Placement Editing via an Associated Properties Dialog Editing via the PCB Inspector Panel Editing via the PCB List Panel Graphical Editing Notes
StickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
Boot Camp-Special Ops Challenge Quiz
1. What s the key difference between a panel and dialog window? a. There is none b. Panels must be closed in order to continue editing, whereas dialogs can be left open c. Dialogs must be closed in order
Creating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool
Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text
SIMPLE TEXT LAYOUT FOR COREL DRAW. When you start Corel Draw, you will see the following welcome screen.
SIMPLE TEXT LAYOUT FOR COREL DRAW When you start Corel Draw, you will see the following welcome screen. A. Start a new job by left clicking New Graphic. B. Place your mouse cursor over the page width box.
Component. Modified by Jason Howie on Feb 13, Parent page: PCB Dialogs. Other Related Resources Component (Object) The Component Dialog.
Component Modified by Jason Howie on Feb 13, 2015 Other Related Resources Component (Object) Parent page: PCB Dialogs The Component Dialog. Summary The Component dialog is used to edit the properties of
draw reference planes click on EQ Parametric Truss STEP 1: from the big R _ scroll over New _ click on Family
Parametric Truss STEP 1: from the big R _ scroll over New _ click on Family STEP 2: select Structural Framing - Complex and Trusses from the list of templates _ click on Open STEP 3: type RP (reference
Troubleshooting in Microsoft Excel 2002
Page 1 of 8 Troubleshooting in Microsoft Excel 2002 Result: To understand how to work with the Excel software to enter data, navigate the page, and print materials. Tabs Look at the tabs at the bottom
Comments. Summary. Modified by Rob Evans on Jun 10, Parent page: Workspace Manager Panels
Comments Modified by Rob Evans on Jun 10, 2015 Parent page: Workspace Manager Panels The Comments panel showing a collection of user comments for the currently active project. Summary The Comments panel
Lesson 1 Parametric Modeling Fundamentals
1-1 Lesson 1 Parametric Modeling Fundamentals Create Simple Parametric Models. Understand the Basic Parametric Modeling Process. Create and Profile Rough Sketches. Understand the "Shape before size" approach.
VLSI Lab Tutorial 1. Cadence Virtuoso Schematic Composer Introduction
VLSI Lab Tutorial 1 Cadence Virtuoso Schematic Composer Introduction 1.0 Introduction The purpose of the first lab tutorial is to help you become familiar with the schematic editor, Virtuoso Schematic
Case Study 1: Piezoelectric Rectangular Plate
Case Study 1: Piezoelectric Rectangular Plate PROBLEM - 3D Rectangular Plate, k31 Mode, PZT4, 40mm x 6mm x 1mm GOAL Evaluate the operation of a piezoelectric rectangular plate having electrodes in the
Cadence Tutorial A: Schematic Entry and Functional Simulation Created for the MSU VLSI program by Andrew Mason and the AMSaC lab group.
Cadence Tutorial A: Schematic Entry and Functional Simulation Created for the MSU VLSI program by Andrew Mason and the AMSaC lab group. Revision Notes: Aug. 2003 update and edit A. Mason add intro/revision/contents
Lesson 18: Creating a Hierarchical Block
Lesson 18: Creating a Hierarchical Block Lesson Objectives After you complete this lesson you will be able to: Create hierarchical blocks Copying Schematics between Projects You can copy and paste between
Control the Workplane
Control the Workplane This tutorial outlines the procedures to understand and control the user coordinate system (UCS). You can realign and reorient the UCS to create and modify 3D objects on 2D workplanes
Appendix B Import (CAD Transfer) Mode Keyboard Shortcuts
Import (CAD Transfer) Mode Keyboard Shortcuts Mode-Changing Keys E F H W V P Switch to Edit mode (press twice for Entry mode) Switch to Profile View mode Switch to Highway mode (if available) Switch to
Getting Started. In This Chapter
Getting Started In This Chapter 2 This chapter introduces concepts and procedures that help you get started with AutoCAD. You learn how to open, close, and manage your drawings. You also learn about the
Part. Summary. Modified by Susan Riege on Aug 5, Parent page: Objects
Part Old Content - visit altium.com/documentation Modified by Susan Riege on Aug 5, 2016 Parent page: Objects Related Resources Net Ties and How to Use Them (PDF) The Part represents the actual physical
Polygon Pours and Copper Regions. Fills and Solid Regions. Modified by Admin on Nov 18, 2013
Polygon Pours and Copper Regions Old Content - visit altium.com/documentation Modified by Admin on Nov 18, 2013 A common requirement on a printed circuit board is large areas of copper. It could be a hatched
Introduction to Microsoft Excel
Chapter A spreadsheet is a computer program that turns the computer into a very powerful calculator. Headings and comments can be entered along with detailed formulas. The spreadsheet screen is divided
Getting started in the PCB Editor
Getting started in the PCB Editor by Lori Zukerman of the EE/CAD group 01/07/04 Page 1 of 21 1. Initial Setup... 3 1.1 Copying Drawing Formats... 3 2. Starting your PCB... 3 2.1 Open a setup drawing...
End User Guide. 2.1 Getting Started Toolbar Right-click Contextual Menu Navigation Panels... 2
TABLE OF CONTENTS 1 OVERVIEW...1 2 WEB VIEWER DEMO ON DESKTOP...1 2.1 Getting Started... 1 2.1.1 Toolbar... 1 2.1.2 Right-click Contextual Menu... 2 2.1.3 Navigation Panels... 2 2.1.4 Floating Toolbar...
Revision Notes: July2004 Generate tutorial for single transistor analysis. Based on existing schematic entry tutorial developed for ECE410
Cadence Analog Tutorial 1: Schematic Entry and Transistor Characterization Created for the MSU VLSI program by Professor A. Mason and the AMSaC lab group. Revision Notes: July2004 Generate tutorial for
How to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
Citizens MapViewer User Manual
Citizens MapViewer User Manual This guide has been designed with step-by-step instructions to help familiarize you with using the city s Citizens MapViewer. Each of the controls (menus and buttons) is
Controlling the Drawing Display
Controlling the Drawing Display In This Chapter 8 AutoCAD provides many ways to display views of your drawing. As you edit your drawing, you can control the drawing display and move quickly to different
Word 2007: Flowcharts Learning guide
Word 2007: Flowcharts Learning guide How can I use a flowchart? As you plan a project or consider a new procedure in your department, a good diagram can help you determine whether the project or procedure
DOING MORE WITH POWERPOINT: MICROSOFT OFFICE 2013
DOING MORE WITH POWERPOINT: MICROSOFT OFFICE 2013 GETTING STARTED PAGE 02 Prerequisites What You Will Learn USING MICROSOFT POWERPOINT PAGE 03 Slide Views MORE TASKS IN MICROSOFT POWERPOINT PAGE 05 Formatting
DC Circuit Simulation
Chapter 2 DC Circuit Simulation 2.1 Starting the Project Manager 1. Select Project Manager from the Start All Program Cadence Release 16.5 Project Manager. 2. Select Allegro PCB Designer (Schematic) from
3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
Mouse Navigation. Middle Button (wheel) Pan. Click + Drag. Re-Center View. Double-Click. Context Menu. Tool Operation. Click. Click. Multi-Select.
BLUEBEAM REVU KEYBOARD SHORTCUTS Mouse Navigation Middle Button (wheel) Pan Re-Center View Click + Drag Double-Click Left Button Right Button Tool Operation Click Context Menu Click Pan Click + Spacebar
Design and Print Instruction Manual
Diamond Design Design and Print Instruction Manual Contents Installation 1 Installing the Diamond Design Software 2-3 Installing the ORIGINAL Argox OS-214 printer drivers 4 Installing the EXCEL Argox OS-314
Lesson 9: Advanced Placement Techniques
9 Lesson 9: Advanced Placement Techniques Learning Objectives In this lesson you will: Turn ratsnests on and off to selectively place components Use interactive swapping for pins and gates Apply advanced
2D Tutorial. Project Description: Running VisualAnalysis: Setting Up the Project:
2D Tutorial Project Description: This project has been set-up to demonstrate the basic features of VisualAnalysis. You will model and analyze the following two-dimensional frame with a curved glue-laminated
Introduction and Evaluation Guide
Introduction and Evaluation Guide 2 Pulsonix Tutorial Copyright Notice Copyright WestDev Ltd. 2000-2018 Pulsonix is a Trademark of WestDev Ltd. All rights reserved. E&OE Copyright in the whole and every
One possible window configuration preferences for debug cycles
NEW USER S TUTORIAL Welcome to ICAP/4, Intusoft s suite of analog and mixed-signal simulation products. There is also a New User s Tutorial 2 as follow-on to this tutorial for non-icap/4rx products. Let
Probes are available for placement in the Schematic Editor only, by choosing Place» Directives» Instrument Probe [P, V, I] from the main menus.
![Probes are available for placement in the Schematic Editor only, by choosing Place» Directives» Instrument Probe [P, V, I] from the main menus.](/thumbs/88/116292734.jpg "Probes are available for placement in the Schematic Editor only, by choosing Place» Directives» Instrument Probe [P, V, I] from the main menus.")
Instrument Probe Old Content - visit altium.com/documentation Modified by Admin on Nov 18, 2013 Parent Page: Objects An Instrument Probe. Summary An instrument probe is a design directive. It instructs