SYNTEC. Mill Controller Manual (For EZ Series) By: SYNTEC Date: 2010/9/14 Version: 1.0
|
|
- Nathaniel Walsh
- 5 years ago
- Views:
Transcription
1 SYNTEC Mill Controller Manual (For EZ Series) By: SYNTEC Date: 2010/9/14 Version: 1.0
2 Contents 1 CNC MILLING CONTROLLER INTERFACE CNC System Configuration Screen Sections Main Menu Selections F1:Position F1:Coor. Switch F2:1/2 Coor F3:Clear Coor F4:Clear All Relative F5:Workpiece Coor F1:Coor. Latched F2:Rel. Latched F3:Aux. Latched F5:Middle Point Func F2:Program F1:Insert Cycle F2:Delete Line F3:Edit Cycle F4:Simulation F1: STEP F2:Continue F3:Zoom F4:Graph reset F5:Abort F5:Simu. Setting F5:File Manager F1:New File F2:Copy File F3:Delete File F4:Import F5:Export F1:RS232 Import F2 :RS232 Export F3:Network Import... 20
3 F4:Multi Import F5:Multi Export EDIT EDIT sub function F1 : Search EDIT sub function F2 : Replace EDIT sub function F3 : Go To Line EDIT sub function F4 : copy line EDIT sub function F5 : Insert line F2:Teach F1:Rapid Teach F2:Line Teach F3:Arc Teach F4:Cancel Middle F5:Radius Teach F1:Delete Line F2:Coord Switch F3:Point Teach F3:DlgInput (ONLY for 940M) F4:Monitor F1:Coor F2:Graph Adjust F1:Zoom F2:Graph Reset F5:Simu Setting F3:MDI Input F4:SETTING F5:Tool Setting F5:Work Record F5:Alarm F1:Actual F2:History F5: Save F1:Parameter F2:Diagnosis F1:PLC State F2:System Data F3:Global Variable F4:Coord Variable... 39
4 F5:System Manager F3:Guidance MACHINE OPERATION PANEL nd machine operation panel POWER ON POWER OFF Emergency STOP Home mode and Home function Continues JOG (Rapid JOG) Incremental JOG MPG JOG AUTO mode NC file execute MDI mode single block execute MPG Simulation Dry Run Single block Option Stop Option Skip Spindle control Working led Working Liquid Aux table backward Aux table forward Text key description: HOW TO OPERATE SYNTEC 900ME Manual function (JOG, INC_JOG, MPG) HOME Open a file (EDIT / FLOPPY / RS232) Tool setting (G40/G41/G42, G43/G44/G49) Tool Length measurement (G43/G44/G49) Setting the Workpiece origin offset value (G54...G59)... 55
5 3.7 Manual Data Input (MDI) Assigned an executing NC file (AUTO) Graphic Simulation How to check NC file in SYNTEC controller Auto Center Manual Center Auto center operation Z-axis Auto Tool RS232 FUNCTION DNC Function The software of SYNTEC controller replace the software of DNC to execute RS232 function 73
6 1 CNC Milling Controller Interface 1.1 CNC System Configuration CNC Mill Position F1 Program F2 Dlginput F3 Monitor F4 Alarm F5 Param. F6 Diagnosis F7 Guidance F8 Coor Insert Cycle Coor Actual System Param PLC State 1/2 Coor Clear Coor All Clear Relative Workpiece Coor Delete Line Edit Cycle Edit Search Replace Graph Adjust MDI Input Setting Tool setting Work Record History Save Go to page One Operation Setting PLC I Bit PLC O Bit PLC C Bit PLC S Bit PLC A Bit Go To Line PLC Register Copy Line PLC Timer Insert Line PLC Counter Teach System Data Rapid Teach Line Teach Global Data System Manger Arc Teach Software Setup Cancel Middle Backup System Delete Line Install Local L. Simu. Store Language Step Continue Zoom Graph Reset Abort Simu. Setting File Manager New File Copy File Delete File Import Export RS232 Import RS232 Export -1-
7 1.2 Screen Sections The screen of controller is shown as followings: Meanings For Fields on the Display: (1)Program Number (2)Title (3)Time (4)Date (5)Data Input (6)Hint (7)Status (8)Function Key Switch -2-
8 1.3 Main Menu Selections The following diagram is the main menu selections for SNC Mill controller. To operate SNC Milling controller, users simply make the selections by pressing function keys, F1~F5 located on the bottom of the screen. -3-
9 1.3.1 F1:Position This selection displays coordinate settings of current position. It can also be used to reset the position of relative coordinate. Pressing function key, F1, under the main menu to enter this selection (Note:This is the first screen when the system is booted up) Meaning of fields on the display X:X axis coordinate. Y:Y axis coordinate. Z:Z axis coordinate. Feedrate:Feedrate of cutting tool at each machining, mm per minute (mm/min). Spindle:RPM of spindle speed. Machine(Relative coordinate of working platform) The current position of cutting tool relative to working platform is shown as machine coordinate on the display. Relative The current position of cutting tool relate to the previous location. Absolute(Programming Coordinate) The current position of the origin of user defined coordinate is shown as an absolute position on the display. Distance To Go:The distance of the cutting tool that need to move to the next position show on position(+) and negative(-) direction. -4-
10 Function key selections: F1:Coor. Switch Function:Switch Coordinate Display Operation:Under the Position submenu, whenever users press F1 key, the values and coordinate on the left corner of the display will toggle among the four different coordinates with bigger fonts as shown in the following figure: F2:1/2 Coor. Function: Set the center point of work piece as coordinate origin. Operation: Under the Position submenu, when the message line shows X Input (or Y Input or Z Input ), press F2 1/2 Coordinating and the origin of the coordinate will move to the center point of work piece F3:Clear Coor. Function:Reset the value of X(or Y or Z) axis relative coordinate to zero. (No effect on other axes) Operation:Under the Position submenu, when the message line shows X Input (or Y Input or Z Input ), press F3 to reset the value of X(or Y or Z) axis relative coordinate to zero. -5-
11 F4:Clear All Relative Function:Reset XYZ relative coordinate to zero.(no effect on other coordinates) Operation :Under the Position submenu, pressing F4 will reset XYZ relative coordinate to zero F5:Workpiece Coor. Function:Relative to machine coordinate setting for G54~G59. Operation:Under the Position submenu, press "F5" key and the following screen will show up. The users can begin to set the auto machine coordinate settings of G54~G59. (The system needs to be in Ready Status) 1. External Shift : operator can set the all coordinate G54..G59 at the same time. 2. CNC default G54,if user don t set any G54..G59 in the NC file -6-
12
SYNTEC. Mill Controller Manual (For EZ Series) By: SYNTEC Date: 2010/9/14 Version: 1.0
SYNTEC Mill Controller Manual (For EZ Series) By: SYNTEC Date: 2010/9/14 Version: 1.0 Version edit record No. Modify Content date editor New Vision 01 Mill Operation Manual-EN FOR EZ(5Keys) 2010/09/14
More informationSYNTEC Mill Controller Manual
SYNTEC Mill Controller Manual BySYNTEC Data2001/07/01 Ver8.0 Table Of Contents CHAPTER 1 SNC MILLING CONTROLLER INTERFACE...5 1.1 SNC SYSTEM CONFIGURATION...5 1.2 SCREEN SECTIONS...6 1.3 MAIN MENU SELECTIONS...7
More informationSYNTEC. Mill Controller Manual. By: SYNTEC Date: 2015/11/13 Version: 8.16
SYNTEC Mill Controller Manual By: SYNTEC Date: 2015/11/13 Version: 8.16 Version edit record No. Modify Content date editor New Vision 01 1 st version released - Syntec V8.0 02 Modify teach-in operation
More information6 Series Mill Controller Operation Manual
6 Series Mill Controller Operation Manual Date: 2013/10/25 Version: 1.1 Contents 1 Function Key and System Configuration... 4 1.1 Main Screen Sections... 4 1.2 CNC System Configuration... 5 1.3 Coordinate...
More information6 Series Mill Controller Operation Manual
6 Series Mill Controller Operation Manual Date: 2015/11/13 Version: 1.3 2 Contents 1 Function Key and System Configuration... 4 1.1 Main Screen Sections... 4 1.2 CNC System Configuration... 5 1.3 Coordinate...
More informationGSK218M Milling Machine CNC System
GSK218M Milling Machine CNC System GSK218M is widespread CNC system (matched with machining center and general milling machine) employed with 32-bit high performance CPU and super-large-scale programmable
More informationIEEM 215. Manufacturing Processes I Introduction to the ARIX CNC milling machine
IEEM 215. Manufacturing Processes I Introduction to the ARIX CNC milling machine The image below is our ARIX Milling machine. The machine is controlled by the controller. The control panel has several
More informationSINUMERIK 828D / 840D sl quick reference chart
SINUMERIK 828D / 840D sl quick reference chart Jog functions 1. Power up with reference procedure (machine-dependent) Initial power up switch the main disconnect switch to on wait for the entire system
More informationWheel repair and refurbishment application manual
refurbishment application manual Contents 1. GENERAL DESCRIPTION... 1 2. DIGITIZING... 2 Purpose... 2 Using method... 2 Digitizing operation... 4 Protection or limitations:... 8 Digitizing result checking...
More informationOperation Manual. 3.1 Absolute coordinate Relative coordinate Mechanical coordinate
DELTA_NC300_O_EN_20140428 Operation Manual NC300 Table of content Chapter 1: Table of group menu 1.1 Table of system group menu... 1-1 1.2 Primary control panel function keys... 1-9 1.3 Secondary control
More informationCNC MILLING MACHINE NER VC180)
CNC MILLING MACHINE (SPINNER NER VC180) PREPARED BY: RAFIZAH BINTI ABDUL RASHID NOR ZAIAZMIN BIN YAHAYA PREPARED FOR: ADVANCED MANUFACTURING TECHNOLOGY (EPT 311) Page 1 of 12 TURNING ON THE CNC MILLING
More informationOperation Manual. V3.3 December, Wuhan Huazhong Numerical Control Co., Ltd
Century Star Milling CNC System Operation Manual V3.3 December, 2007 Wuhan Huazhong Numerical Control Co., Ltd 2007 Wuhan Huazhong Numerical Control Co., Ltd Preface Preface Organization of documentation
More informationSeries 0ί -MD Mate CNC STANDARD FEATURES
STANDARD FEATURES Axis Control Digital Servo Function 1 Controlled Path Simultaneously controlled axes: Up to maximum of 3 Serial Encoder Interface Axis Name Selected from X,Y,Z and U,V,W,A,B,C Spindle
More informationNCT. PLC Programmer s Manual. Machine Tool Controls. From SW Version x.061 (M) (L)
NCT Machine Tool Controls PLC Programmer s Manual From SW Version x.061 (M) (L) Produced and developed by NCT Automation kft. H1148 Budapest Fogarasi út 7 : Letters: 1631 Bp. P.O. Box 26 F Phone: (+36
More informationChapter 2: Machine Control Panel
2. MACHINE CNTRL PANEL Chapter 2: Machine Control Panel The most important aspect of correct machine operation is an understanding of the control panel. The following figure shows the layout. [ PWER [~ri
More informationOperation Manual (B) KVR-2418 (24L) Fanuc OiMD CNC. KENT INDUSTRIAL (USA) INC Edinger Ave., Tustin, CA 92780
Operation Manual (B) KVR-2418 (24L) Fanuc OiMD CNC KENT INDUSTRIAL (USA) INC. 1231 Edinger Ave., Tustin, CA 92780 Tel: (714) 258-8526 Fax: (714) 258-8530 Internet: WWW.KENTUSA.COM KENT USA THE WAY TO AFFORDABLE
More informationTurning ISO Dialect T
SINUMERIK 802D Short Guide 09.2001 Edition Turning ISO Dialect T User Documentation SINUMERIK 802D Turning ISO Dialect T Short Guide 09.2001 Edition Valid for Control Software Version SINUMERIK 802D 1
More informationWelcome to. the workshop on the CNC 8055 MC
Welcome to the workshop on the CNC 8055 MC Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 1 Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 2 This manual is part of the course for
More information2. (05. 10) CNC TURNING CENTER
2. (05. 10) CNC TURNING CENTER World Top Class Quality HYUNDAI-KIA Machine High Speed, High Accuracy, High Rigidity CNC Turning Center High Productivity, Versatile & Integrated Lathe High Speed, High Accuracy
More informationADT-CNC4940 CNC4940 Milling Machine Control System. Programming Manual
ADT-CNC4940 CNC4940 Milling Machine Control System Programming Manual Adtech (Shenzhen) Technology Co., Ltd. Add: F/5, Bldg/27-29, Tianxia IC Industrial Park, Yiyuan Rd, Nanshan District, Shenzhen Postal
More informationADT-CNC46208 CNC LATHE SYSTEM Maintenance Manual
ADT-CNC46208 CNC LATHE SYSTEM Maintenance Manual http//www.salecnc.com Email sales@salecnc.com . Contents Contents 1. Foreword... - 3-2. System technical characteristics... - 3-2.1 System structure...-
More informationOperation Manual. 3.1 Absolute coordinate Relative coordinate Mechanical coordinate
DELTA_NC300_O_EN_20130624 Operation Manual Table of content NC300 Chapter 1: Table of group menu 1.1 Table of system group menu... 1-1 1.2 Primary control panel function keys... 1-9 1.3 Secondary control
More informationLesson 6 The Key Operation Procedures
Lesson 6 The Key Operation Procedures Step-by-step procedures can keep you from having to memorize every function that you must perform on your CNC machining center. You will soon memorize procedures for
More informationSmall Machine Operator s Panel Connection Manual
Small Machine Operator s Panel Connection Manual -Item- 1. Overview 2. Overall connection diagram 3. Each connections 3.1 Pin assignment 3.2 Power connection 3.3 Emergency stop switch 3.4 I/O Link connection
More informationPreface. GSK983Ma User Manual divides into three parts, that is, Programming, Operation and Appendix.
This user manual describes all proceedings concerning the operations of this CNC system in detail as much as possible. However, it is impractical to give particular descriptions for all unnecessary or
More informationCNC MACHINE CONTROLLER
CNC MACHINE CONTROLLER PERFECT CNC SOLUTION FOR MACHINE TOOLS INDUSTRY USB AC MAIN SUPPLY RS485 COMMUNICATION RS232 COMMUNICATION EMG SMPS I/O Module MPG XYZ Structure Spindle Encoder Spindle System TURNING
More informationCHAPTER 12. CNC Program Codes. Miscellaneous CNC Program Symbols. D - Tool Diameter Offset Number. E - Select Work Coordinate System.
General CHAPTER 12 CNC Program Codes The next three chapters contain a description of the CNC program codes and parameters supported by the M-Series Control. The M-Series Control has some G codes and parameters
More informationCNC PART PROGRAMMING
CNC PART PROGRAMMING (1) Programming fundamentals Machining involves an important aspect of relative movement between cutting tool and workpiece. In machine tools this is accomplished by either moving
More informationMachine Tools Suite 4
Machine Tools Suite 4 Job Name Server Job Console Job Editor Job Reporter Motion Mechanic Job Name Server Job Name Server Job Name Server is a small utility that runs in the background of the PC. It is
More informationADT-CNC4620 CNC46XX Series CNC System Maintenance Manual
ADT-CNC4620 CNC46XX Series CNC System Maintenance Manual Add: 5/F, Tianxia IC Industrial Park, Yiyuan Rd, Nanshan District, Shenzhen Postal code: 518052 Tel: 0755-26099116 Fax: 0755-26722718 E-mail: export@machine-controller.com
More informationFANUC OPEN CNC OPERATOR S MANUAL BASIC OPERATION PACKAGE 2 B-63924EN/01
FANUC OPEN CNC BASIC OPERATION PACKAGE 2 OPERATOR S MANUAL B-63924EN/01 No part of this manual may be reproduced in any form. All specifications and designs are subject to change without notice. The export
More informationCOPYCAT NEW FANGLED SOLUTIONS 2/6/2009
1.0 INTRODUCTION 1.1 CopyCat is a unique wizard used with MACH3. It is not a stand alone program. This wizard will allow you to jog a machine around and create a Gcode file from the movement. 2.0 REQUIREMENTS
More information3000M CNC Programming and Operations Manual for Two-Axis Systems
3000M CNC Programming and Operations Manual for Two-Axis Systems www.anilam.com P/N 70000496G - Contents Section 1 - CNC Programming Concepts Programs... 1-1 Axis Descriptions... 1-1 X Axis... 1-2 Y Axis...
More informationNOTE This function is optional.
5.AUTOMATIC OPERATION B-63943EN-1/03 5.8 RETRACE M Overview The tool can retrace the path along which the tool has moved so far (reverse execution). Furthermore, the tool can move along the retraced path
More informationMULTI-AXIS TURNING CENTER SKT210Y/SY SKT250Y/SY
MULTI-AXIS TURNING CENTER SKT0Y/SY SKT50Y/SY CNC Turning Center World Top Class Quality HYUNDAI-KIA Machine High Speed, High Accuracy, High Rigidity Speed & Power CNC Turning Center SKT0/50Y/SY SKT0SY
More informationTurning your ideas into reality Novakon MPG Manual
Novakon MPG Manual The E-STOP switch button on your Novakon CNC Control Pendant only provides Emergency STOP signal to Mach3 CNC application. For further protection in CNC operation, other emergency protection
More informationDIFFERENCES FROM SERIES 0i-C
B DIFFERENCES FROM SERIES 0i-C Appendix B, "Differences from Series 0i-C", consists of the following sections: B.1 SETTING UNIT...247 B.2 AUTOMATIC TOOL OFFSET...247 B.3 CIRCULAR INTERPOLATION...249 B.4
More informationHAAS Mini Mill User s Manual
Using the Haas Mini Mills HAAS Mini Mill User s Manual Stanford Product Realization Laboratory Version 1.3 166 1. Machine (Pre) Start-Up a. Check Oil Reservoir (at rear of machine). If Oil Level is below
More informationCNC Milling System Operation Manual
HNC-08M CNC SYSTEM CNC Milling System Operation Manual V1.22 2011/01 WuHan HuaZhong Numerical Control Co., Ltd Table of Contents 1 SUMMARIZE...1 1.1 CNC SOFTWARE SYSTEM INTRODUCTION...1 1.1.1 CNC System
More informationGE FANUC 21 CONCEPT 55 MILL ATC TEACHER GUIDE
GE FANUC 21 CONCEPT 55 MILL ATC TEACHER GUIDE 11/1/07 Version 2 Made by EMCO Authored by Chad Hawk Training Index Control Keyboard Pg 1 Fanuc 21 Control Machine Control Fanuc 21 Screen. Pg 2 Fanuc 21 Keys.
More informationPolar coordinate interpolation function G12.1
Polar coordinate interpolation function G12.1 On a Turning Center that is equipped with a rotary axis (C-axis), interpolation between the linear axis X and the rotary axis C is possible by use of the G12.1-function.
More informationConversational Programming for 6000i CNC
Conversational Programming for 6000i CNC www.anilam.com P/N 634 755-22 - Contents Section 1 - Introduction Section 2 - Conversational Mode Programming Hot Keys Programming Hot Keys... 2-1 Editing Keys...
More informationGE Fanuc Automation. Series 15 / 150 Model B for Machining Center. Computer Numerical Control Products. Descriptions Manual
GE Fanuc Automation Computer Numerical Control Products Series 15 / 150 Model B for Machining Center Descriptions Manual GFZ-62082E/04 April 1997 Warnings, Cautions, and Notes as Used in this Publication
More informationTutorial: Basic G Code Programming By: Matthew Jourden Brighton High School Brighton, MI
Tutorial: Basic G Code Programming By: Matthew Jourden Brighton High School Brighton, MI Reference: Coordinate Axis Direction Z Y X Tutorial is designed to create a wireframe model of a part. This tutorial
More informationUp to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface
Up to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface Acu-Rite 3500i boosts efficiency, versatility, touch
More informationMach4 CNC Controller Screen Editing Guide Version 1.0
Mach4 CNC Controller Screen Editing Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,
More informationOPERATION MANUAL. TYPE:C-Type Series CONTROLLER:FANUC 0iMD / 18iMB / 31iB VERSION NO.:AFEQFI03 DATE:2012/05/03 AWEA MECHANTROINC CO.
OPERATION MANUAL TYPE:C-Type Series CONTROLLER:FANUC 0iMD / 18iMB / 31iB VERSION NO.:AFEQFI03 DATE:2012/05/03 AWEA MECHANTROINC CO., LTD NO.15,Keyuan 2nd Rd., Taichung City, Taiwan. 40763 TEL:886-4-2462-9698
More informationHDS Series Quick Start Guide.
Techno-Osai Start Up Sequence HDS Series Quick Turn the Main power switch to the ON Position. 220 volts should have been attached to this switch by an electrician. Power On Button. Computer power ON. The
More informationFAGOR AUTOMATION MC TRAINING MANUAL
FAGOR AUTOMATION MC TRAINING MANUAL ACER MC TRAINING MANUAL 8 holes 1/2" depth grid pattern R0.125 1.5 6 unit: inch R0.25 4 1.25 2 2.675 1/2" depth rectangular pocket 1/2" depth circular pocket R0.75 8
More informationUltimate Screen Reference Guide
MACHMOTION Ultimate Screen Reference Guide 8/11/2011 Everything you need to know to use and setup the MachMotion Ultimate Screen. MachMotion Version 1.0.2 2 P a g e Copyright 2011, MachMotion.com All rights
More informationOperating Manual PA 8000 NT
PA 8000 NT PA Power Automation User documentation PA 8000 NT Edition 11.01 Software Revision 1.9 Copyright PA SUBJECT TO TECHNICAL MODIFICATIONS AND ERRORS PA Power Automation AG Gottlieb-Daimler-Str.
More informationMACHMOTION. Tool Setup. Using MachMotion s CNC Control 12/23/2010. Everything you need to know to setup your tooling in Mach3.
MACHMOTION Tool Setup Using MachMotion s CNC Control 12/23/2010 Everything you need to know to setup your tooling in Mach3. Mach Motion Version 1.0.1 2 P a g e Copyright 2010, MachMotion.com All rights
More information3300M/MK CNC Programming and Operations Manual
3300M/MK CNC Programming and Operations Manual www.anilam.com P/N 70000381C - Contents Section 1 - CNC Programming Concepts Programs... 1-1 Axis Descriptions... 1-1 X Axis... 1-2 Y Axis... 1-2 Z Axis...
More information2. INTRODUCTION TO CNC
Q. Define NC Machines. 2. INTRODUCTION TO CNC A method of automation, in which various functions and processing of machine tools are controlled by letters and symbols. The general objective of NC technology
More informationCNC Turning. Module2: Introduction to MTS-TopTurn and G & M codes. Academic Services PREPARED BY. January 2013
CNC Turning Module2: Introduction to MTS-TopTurn and G & M codes PREPARED BY Academic Services January 2013 Applied Technology High Schools, 2013 Module2: Introduction to MTS-TopTurn and G & M codes Module
More informationSoftware designed to work seamlessly with your CNC Masters machine. Made to work with Windows PC. Works with standard USB
Software designed to work seamlessly with your CNC Masters machine Made to work with Windows PC Works with standard USB Clutter free interface. The software is engineered for the machine so you don t have
More informationG & M Code REFERENCE MANUAL. Specializing in CNC Automation and Motion Control
REFERENCE MANUAL Specializing in CNC Automation and Motion Control 2 P a g e 11/8/16 R0163 This manual covers definition and use of G & M codes. Formatting Overview: Menus, options, icons, fields, and
More information6000i CNC User s Manual
6000i CNC User s Manual January 2008 Ve 02 627785-21 1/2008 VPS Printed in USA Subject to change without notice www.anilam.com P/N 627785-21 - Warranty Warranty ANILAM warrants its products to be free
More information5000M CNC Programming and Operations Manual
5000M CNC Programming and Operations Manual www.anilam.com P/N 70000508G - Warranty Warranty ANILAM warrants its products to be free from defects in material and workmanship for one (1) year from date
More informationXbox gamepad CNC pendant user manual
Patrik Tegelberg 2017-09-04 Xbox gamepad CNC pendant user manual Computer controlled manufacturing machines are awesome, and not designed for manual cutting. This controller, for LinuxCNC, maintains the
More informationCentury Star Turning CNC System. Programming Guide
Century Star Turning CNC System Programming Guide V3.5 April, 2015 Wuhan Huazhong Numerical Control Co., Ltd 2015 Wuhan Huazhong Numerical Control Co., Ltd Preface Preface Organization of documentation
More informationStandard Mach4 Features included with Tangential:
MACH4 TANGENTIAL Tangential takes place on one page: Program Run. The Tangential Profile is intended to operate Machinery equipped with a rotational axis independent of, but usually associated in, the
More informationFeatures & Specifications V
Features & Specifications V18.0919 KEEP THE IRON. UPGRADE YOUR MACHINE. A Turnkey Solution to easily replace your Fadal Control Utilize your existing AC/DC servo components and wiring Replace your old
More informationVERTICAL MACHINING CENTER OPERATION MANUAL I-SERIES-CAM
VERTICAL MACHINING CENTER OPERATION MANUAL I-SERIES-CAM 07.10,2010 FANUC 18M,0I,18I,21I 1. PREFACE... 1-1 2. INSTALLATION AND POWER ON... 2-1 2.1 INPUT POWER ON... 2-2 2.2 SPECIFICATIONS OF ELECTRICAL
More information600L Series INSTRUCTION MANUAL
BNP-B2231A (ENG) 600L Series INSTRUCTION MANUAL Introduction This instruction manual mainly targets lathe. This is to be used as a guide when using MELDAS 600L Series, the software-fixed type of CNC (NC
More informationMELDAS, MELDASMAGIC, and MELSEC are registered trademarks of Mitsubishi Electric Corporation. The other company names and product names are
MELDAS, MELDASMAGIC, and MELSEC are registered trademarks of Mitsubishi Electric Corporation. The other company names and product names are trademarks or registered trademarks of the respective companies.
More informationThis manual describes the various matters concerning the. operations of this CNC system as much as possible. However, it is
This manual describes the various matters concerning the operations of this CNC system as much as possible. However, it is impossible to give detailed descriptions to all the unnecessary or unallowable
More informationKeypad Lay-out. Copyright 2008 Optimal Engineering Systems, Inc
Keypad Lay-out - 1 - Setting Acceleration Pressing the for each motor. key allows the user to enter the acceleration values 1) Press. 2) The controller displays Select Axis:1 thru 3. 3) Press 1 for X axis,
More informationSINUMERIK 802D. Turning. User Documentation
SINUMERIK 802D Brief Instructions Turning 11.2000 Edition User Documentation SINUMERIK 802D Turning Valid for Control Software version SINUMERIK 802D 1 11.2000 Edition SINUMERIK documentation Printing
More informationIntroduction CAUTION. Details described in this manual
Introduction This manual is a guide for using the MELDAS 60/60S Series, MELDASMAGIC64. Programming is described in this manual, so read this manual thoroughly before starting programming. Thoroughly study
More informationCNC Knee Type Milling Machines with USA CENTROID M-400S CNC control
CNC Knee Type Milling Machines with USA CENTROID M-400S CNC control GMM-949-CNC, 9 x49 table, R8, vari-speed, 3 axis CNC... GMM-949F-CNC, 9 x49 table, R8, inverter drive, 5,000 rpm, 3 axis CNC.. Note:
More informationCourse Outline for SELCA Training
Course Outline for SELCA Training ISO Programming Conversational Programming Selca special language Programming PROGET2 Rotary table programming 5 axes tilting Head and table programming For S3000 series
More informationGSK983M Milling Machine CNC System
GSK983M Milling Machine CNC System Introduction GSK983M-S is employed with 640 480 high resolution and high light LCD display about 7. inch, and GSK983M-V with 640 480 high resolution and high light 16
More informationSection 20: Graphics
Section 20: Graphics CNC 88HS Graphics Graphics Menu The graphics menu of the page editor has been designed to allow the user to view the part path of the current program in memory. The graphics can be
More informationCENTROID. M-SERIES Operator's Manual. Version 8.22 Rev U.S. Patent # Centroid Corp. Howard, PA 16841
CENTROID M-SERIES Operator's Manual Version 8.22 Rev. 030826 U.S. Patent #6490500 2004 Centroid Corp. Howard, PA 16841 CNC Control Information Sheet Fill out the following and fax back to Centroid Tech
More informationCENTROID. T-SERIES Operator's Manual. Version 8.22 Rev U.S. Patent # Centroid Corp. Howard, PA 16841
CENTROID T-SERIES Operator's Manual Version 8.22 Rev. 030826 U.S. Patent #6490500 2004 Centroid Corp. Howard, PA 16841 CHAPTER 1 - Introduction Window Description 1-1 Conventions 1-3 Machine Home 1-4 Keyboard
More informationTable of Contents. Fadal. Operator Manual
Table of Contents Power On/Off... 3 Pre-Startup Checks... 3 Power On for System 97/99... 4 Automatic Cold Start... 5 Wrong Power Off Procedure... 6 Auto Startup Program... 7 Power Off Procedure... 9 Pendant...
More informationMELDASMAGIC MMI OPERATION MANUAL (FOR L/G) BNP-B2194 (ENG)
MELDASMAGIC MMI OPERATION MANUAL (FOR L/G) BNP-B2194 (ENG) MELDASMAGIC is a registered trademark of Mitsubishi Electric Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation.
More informationFAGOR 800T CNC OPERATING MANUAL. Ref (in)
FAGOR 800T CNC OPERATING MANUAL Ref. 9701 (in) ABOUT THE INFORMATION IN THIS MANUAL This manual is addressed to the machine operator. It includes the necessary information for new users as well as advanced
More informationMAXNC MAXNC T2-CL OPERATION MANUAL
MAXNC MAXNC T2-CL OPERATION MANUAL COMPUTER REQUIREMENTS: The MAXNC CL software requires a PC computer, 66 M/H or faster, with one bi-directional parallel port installed. Just 640K of standard memory is
More informationMach4 CNC Controller Mill Programming Guide Version 1.0
Mach4 CNC Controller Mill Programming Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,
More informationMach4 Lathe G-Code and M-Code Reference
Mach4 Lathe G-Code and M-Code Reference Chapter 1: Introduction G-Code is a special programming language that is interpreted by Computer Numerical Control (CNC) machines to create motion and other tasks.
More informationNcStudio Programming Manual
NcStudio Programming Manual 6th Edition Weihong Electronic Technology Co., Ltd. The copyright of this manual belongs to Weihong Electronic Technology Co., Ltd. (hereinafter referred to as Weihong Company).
More informationPC-BASED NUMERIC CONTROLLER
Ncstudio PC-BASED NUMERIC CONTROLLER PROGRAMMING MANUAL there is WEIHONG Where there is motion control Thank you for choosing our products! This manual will help you acquaint with our products and learn
More informationSection 8: Commands. Table 1: Command List DESCRIPTION COMMAND PARAMETERS
Section 8: Commands Table 1: Command List DESCRIPTION COMMAND PARAMETERS AUTO: AU, From, to, dry run option, direct block start BACKLASH: BL, Axis no., amount at center, at - limit, at + limit CHANGE DEVICE:
More informationSoftware Manual. Version: H BENCHTOP ROBOT SOFTWARE USER GUIDE Version H
Software Manual Version: H6.1.1.292 BENCHTOP ROBOT SOFTWARE USER GUIDE Version H6.1.1.293 Software Manual Table of Contents SECTION 1: INTRODUCTION... 5 1.1 Introduction...6 1.2 Safety...6 1.3 New Features...6
More informations SINUMERIK 808D ADVANCED
s SINUMERIK 808D ADVANCED CNC Software V4.6.0.4 PPU MLFB & A5E: 808D ADVANCED M CN PPU161.2 6FC5370-2AM02-0CA0 SNC-A5E31952704 808D ADVANCED T CN PPU161.2 6FC5370-2AT02-0CA0 SNC-A5E31952702 808D ADVANCED
More informationCNC 8055 T. New features. Ref.1710 Soft: V02.3x
CNC 8055 T New features Ref.1710 Soft: V02.3x DUAL-USE PRODUCTS Products manufactured by FAGOR AUTOMATION since April 1st 2014 will include "-MDU" in their identification if they are included on the list
More informationLesson 4 Introduction To Programming Words
Lesson 4 Introduction To Programming Words All CNC words include a letter address and a numerical value. The letter address identifies the word type. The numerical value (number) specifies the value of
More informationMach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775
Mach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation:
More informationMANUFACTURING PROCESSES
MANUFACTURING PROCESSES - AMEM 201 Lecture 7: CNC MACHINE TOOLS 1 CNC MACHINE TOOLS TERMINOLOGY NC Numerical Control CNC Computer Numerical Control CAD Computer Aided Design CAM Computer Aided Manufacturing
More informationApplication Case. Application: Delta s AC Servo System on Robot Arms for CNC Machine Tools. Issued by Solution Center Date March 2013 Pages 5
Case Application: Delta s AC Servo System on Robot Arms for CNC Machine Tools Issued by Solution Center Date March 2013 Pages 5 Applicable to Delta s AC Servo Drives and Motors Key words Servo System,
More informationDigital display for EMCO milling machines
Digital display for EMCO milling machines Input box 7 8 9 1 X Y Z HELP 4 5 6 1 2 3 0. - ESC 3 CE ENT R + R - 2 REF RST 1... Screen (working window, displays) 2... 5 soft keys (function depends on the respective
More informationMicrosoft(R) and Windows(R) are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Microsoft(R) and Windows(R) are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MELDAS is a registered trademark of Mitsubishi Electric
More informationCOMPUTER NUMERICAL CONTROL OF MACHINE TOOLS
COMPUTER NUMERICAL CONTROL OF MACHINE TOOLS Department of Mechanical Engineering and Aeronautics University of Patras, Greece Dr. Dimitris Mourtzis Associate professor Patras, 2017 1/52 Chapter 8: Two
More informationINSTALLING THE WINDOWS-BASED DRIVER NOTICE!
INSTALLING THE WINDOWS-BASED DRIVER NOTICE! Keep the machine and the computer unconnected until you carry out this installation operation. Failure to follow the correct procedure may make installation
More information130Series. CNC Horizontal Boring & Milling Machines SNK AMERICA, INC. MACHINE TOOL GROUP
130Series CNC Horizontal Boring & Milling Machines SNK AMERICA, INC. MACHINE TOOL GROUP 100 Howard Street Elk Grove, IL 60007 Tel: 47.364.001 Fax: 47.364.4363 www.snkamerica.com PRINTED IN USA 0/0 CNC
More informationGE FANUC 21 CONCEPT 55 TURN TEACHER GUIDE
GE FANUC 21 CONCEPT 55 TURN TEACHER GUIDE 2/13/08 Version 2 Made by EMCO Authored by Chad Hawk Training Index Control Keyboard Pg 1 Fanuc 21 Control Machine Control Fanuc 21 Screen Pg 2 Fanuc 21 Keys Pg
More informationdfab Laguna CNC Manual With FANUC Control
dfab Laguna CNC Manual With FANUC Control 1 Introduction Throughout this manual we use different nomenclature for [HARD KEYS] and (SOFT KEYS). A [HARD KEY] is a button on the CONTROL PANEL (upper panel)
More informationSSII SUV MANUAL. LAGUNA TOOLS 2072 Alton Parkway Irvine, California Ph:
SSII SUV MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered trademarks of Laguna
More information