July Domonial Wireless Alarm System TCPA Keyfobs

Size: px

Start display at page:

Download "July Domonial Wireless Alarm System TCPA Keyfobs"

Noel White
6 years ago
Views:

1 July 2013 Domonial Wireless Alarm System TCPA Keyfobs

TCPA Keyfobs Ergonomic and compact design Multiple accessories fitting all usages Water resistance LED to acknowledge successful command Backward compatibility TCPA1B: 1-button -> emulation of

2 TCPA Keyfobs Ergonomic and compact design Multiple accessories fitting all usages Water resistance LED to acknowledge successful command Backward compatibility TCPA1B: 1-button -> emulation of TCM800HF (on Domonial) TCPA2B: 2-button -> emulation of TCBPA8M-1 (on Domonial) See compatibility table for other panels Added value functions Panic Alarm, Drive of actuators, Arming/Disarming, Door bell (with upcoming new panel firmware) Supervision (with upcoming new panel firmware) 2

3 Wireless Keyfobs Range 3

4 Compatibility with other Panels 4

accessories Water resistant IP67 Supervised (upcoming) Status LED 4 years battery life Alpha, V2, Alpha Russia

5 TCPA1B 1-Button Panic Alarm Keyfob APPLICATIONS Panic/Hold-up alarm Life comfort User supervision BENEFITS Usable all time Simple to operate Well fitting design Long battery life KEY FEATURES Panic Alarm (default) Multi-wear accessories Water resistant IP67 Supervised (upcoming) Status LED 4 years battery life Alpha, V2, Alpha Russia radio protocols Backward compatible Other optional modes: Home automation Doorbell (upcoming) User supervision (upcoming) 5

Multi-wear accessories Water resistant IP67 Supervised (upcoming) Status LED 4 years battery life Alpha, V2, Alpha

6 TCPA2B 2-Button Panic Alarm Keyfob Stickers included APPLICATIONS Panic/Hold-up alarm Life comfort User supervision BENEFITS Usable all time Simple to operate Well fitting design Long battery life KEY FEATURES Panic Alarm (default) Multi-wear accessories Water resistant IP67 Supervised (upcoming) Status LED 4 years battery life Alpha, V2, Alpha Russia radio protocols Backward compatible Other optional modes: Home automation Setting/Unsetting User supervision (upcoming) 6

7 Multi-wear Accessories Included Pendant Keychain Wristband Belt clip / Wall/Desk mount 7

8 Wall/Desk Mount of Bracket Accessory Possible hole positions for wall or desk mount Make a hole in the predefined hole positions. Use screws with a head thickness of less than 2mm 8

9 Enrolment on Domonial REGISTRATION PROCEDURE First, set the panel to registration mode To start registration, press the keyfob button for 5 seconds. The LED will start blinking. The keyfob will try to register with the following sequence of radio protocols: Alpha, V2, Alpha Russia On DomoPC 6.0 the keyfob are enroled with the «TCB800M» type. The new «TCPA1B» or «TCPA2B» type are supported starting from DomoPC 6.2 After the first registration, to enroll again the keyfob with a different panel remove and put the battery back before starting the registration procedure 9

TCPA1B Configuration CONFIGURATION VIA DOMOPC Select the wanted button behavior on the Alert column of the Keyfobs/Standard settings window

10 TCPA1B Configuration CONFIGURATION VIA DOMOPC Select the wanted button behavior on the Alert column of the Keyfobs/Standard settings window for the registered keyfob Current panels only offer Alert1/2/3 options. Other optional TCPA1B modes will be supported by upcoming panel SW 10

11 TCPA2B Configuration DomoPC 6.0 CONFIGURATION VIA DOMOPC 6.0 Select the wanted buttons behavior using the following Keyfobs settings: Long push (2s) of both buttons Standard tab / Alert column Right button Advanced tab / «Ctrl+Part Arm» column Left button Advanced tab / «Ctrl+Arm» column Short push (300ms) of both buttons Advanced tab / «Ctrl+Disarm» column Current panels only offer some options. Other optional TCPA2B modes will be supported by upcoming panel SW 11

12 TCPA2B Configuration DomoPC 6.2 CONFIGURATION VIA DOMOPC 6.2 Select the wanted buttons behavior using the following settings in the Keyfobs Advanced tab: Short push (300ms) of both buttons Short double push Long push (2s) of both buttons Long double push Right button Left button Current panels only offer some options. Other optional TCPA2B modes will be supported by upcoming panel SW 12

13 Battery Replacement BATTERY REPLACEMENT 1. Remove 4 screws (1) and lift off cover. 2. Using a small flat-blade screwdriver remove old battery (2). 3. Insert new battery by placing new battery under the gold tab and then pressing down (3). Ensure the positive (+) side of battery is face up after installation 4. Align cover and attach with 4 screws NOTE: When replacing the battery, wait a minimum of 10 seconds prior to installing the new battery 13

14 Battery Lifetime BATTERY LIFETIME Battery lifetime depends on number of activations per month and supervision period Protocol alpha example: more than 4 years of lifetime with 200 activations per month without supervision 14

15 THANK YOU 15

16 Enrolment on Vista (1/2) SELECTION OF THE PROTOCOL To work with Vista EUHS, TCPA1B/TCPA2B must be set into V2 protocol This must be done BEFORE enrolment on panel TCPA1B: press the button for 5sec TCPA2B: press simultaneously both buttons for 5sec Then, the keyfob LED will blink during 10-15sec Without any «answer» coming back in ALPHA or RUSSIA protocol, the keyfob will be automatically set in V2 IMPORTANT: This must be done before setting the panel into enrolment mode. 16

17 Enrolment on Vista (2/2) ENROLMENT As any other keyfob working with Vista panels, enrolment will be done by pressing the button(s) on panel request. 1. Enter in programming mode (install code ) 2. Enter in zone programming (*56) 3. Select zone where keyfob will be enrolled 4. Choose appropriate zone type (mostly 06-07: panic silent or audible, or any other type desired) 5. Select RF button 6. For enrolment, on panel request, press the keyfob button (TCPA1B) or the 2 buttons simultaneously (TCPA2B) 7. Press the button(s) again, and if requested confirm a 3rd time 8. Program then alpha description, pass to another zone or exit zone programming with Input S/N L AXXX-XXXX 1 Xmit to Confirm Press * to Skip 17

Property of Monitronics Inc

Property of Monitronics Inc Enter Program 1. 4112 + 8 + 0 + 0 (Display should show 20) or Power down then back up and press * and # within 1 minute (If exiting programming you can re-enter within 1 minute by pressing * and #) Exit