POWERBOX Defense Line DAA/DAB/DAC Series 150W to several kws DC/DC Conduction Cooled. Preliminary
|
|
- Easter Walsh
- 6 years ago
- Views:
Transcription
1 50W to several kws Preliminary Features,, 8, 7, 0VDC in packages 50, 00W, 500W utput from V to 8VDC Input filtering EN550 & transient protection Reverse polarity protection Several outputs, parallel or series operations up to several kws MILSTD75, 6, 80, 70 options Safety IEC/EN60950-, RHS lead-free-solder compliant Description The DAA/DAB/DAC, very compact DC/DC converter in chassis mount format, incorporates input filtering, input and output protections, very robust mechanical mounting and connection, optional conformal coating, required in most of the severe environment for industrial, railways, defense type of applications. The converter provides high reliability, high efficiency, input-to-output isolation, soft start, overtemperature protection, input over/undervoltage lockout. The converters wide range of inputs are protected against surges and transients and EMI filtered. The outputs are countinuously shortcircuit proof. The 00 C baseplate operation allows operation in high temperature environment. The output can be configured in many different output voltages from V to 8VDC, can be put in series and parallel, others possibilities are even possible as semi-standard versions. Wide range of accessories like input & output Bus bars, N oring diodes, parallel cables are available to simplify multi units assemblies. Military options (M) make it suitable for MIL STD compliance. Electrical data Input data See table, page. Input fuse Protects against damages in case of a failure. Input transient protection es. Input reverse polarity A diode placed internally. Parallel/series Possible. Redundant operation ring diodes are required to ensure proper N operation (included with optional N bus bar). Hold-up time Limited hold-up time. utput current limitation Continously protected against short-circuit. Thermal considerations Baseplate which should not exceed 00 C. Thermal protection TP protection, automatic restart. Primary inhibit Remote on/off. utput voltage adj. es. Sense lines Enables compensation of voltage drop. V, total drop <0.5, negative line drop <0.5. Power good Green LED. Paralleling signal es. ptions Heatsink (H) Ruggedized (M) 0 C operation (T) Conformal coating (V) The unit is built as standard with a aluminum baseplate as described in the mechanical data. The converter can be delivered with a 5mm heatsink. The unit can be ruggedized to meet MIL-STD80E, MIL-STD6E CE0, on DAA and DAB series only. M option with V & V wide input will comply with MIL STD 75A. The thermal grade of the components are comply with low ambient temperature. During manufacturing process components and pcb are covered with an acrylic coating to address high level of ambiant humidity application. Environmental Damp heat MIL STD 80 Proc Shock MIL STD 80 Proc. 56. Vibrations MIL STD 80 Proc General Electric strenght Insulation resistance Standards Safety standards Input to earth 500Vrms. Input to output 000Vrms. utput to earth 500Vrms. >00Mohms. IEC , EN Railway application Designed to meet EN5055, EN50. Electromagnetic immunity Supply surge EN5055. Direct transients EN5055. Surges EN Electrostatic discharge EN Fast transients/burst EN
2 50W to several kws -IN IN F F INPUT INPUT - F D J 9-6Vdc J D D L J7A J8A INMD IN -IN PC PR UT S -S -UT SC VI INMD C5 C6 6 IC C -IN D C R C7 C8 C9 C0 R6 R7 J5 J6 V -V R5 C C D5 D7 R 6 IC Pgood- Pgood D6 P I J 5 J0 PGD PGD- SENSE PGD- PGD TRIM -SENSE SENSE -SENSE R9 R0 TRIM Sense V -Sense V Trim R J J D8 C C R R R8 6 5 TR verte L L C C D9 C5 J9A Active transient protection J J J
3 50W to several kws Input Model V wide V 8V 7V 0V Characteristics Conditions Number min typ max min typ max min typ max min typ max min typ max Units perating input voltage V Input surge <00ms V Undervoltage turn-on V Undervoltage turn-off V vervoltage turn-off V Input current Vin min DAA A DAB A DAC A No load input power DAA W DAB W DAC W Input capacitance No inrush DAA uf limiting DAB uf circuit DAC uf Start-up time DAA ms DAB ms DAC ms Part Number Structure D A A W HMTV Chassis Input utput Power Input Range ptions D: Defense Line A: DC/DC A: 5mm : 9-6VDC (W) V: VDC 50: 50W : : : None W 8-6VDC 5: 5VDC 75: 75W W: : H: Heatsink B: 0mm 8: 6-75VDC 6: 6VDC 00: 00W M: Ruggedized 75-00W 7: -0VDC 8: 8VDC 5: 5W T: -0 C operation C: 00mm 0: 66-VDC : VDC 50: 50W V: Conformal coating 50-50W 5: 5VDC 75: 75W : VDC 00: 00W 8: 8VDC 50: 50W 6: 6VDC 00: 00W 8: 8VDC 00: 00W 500: 500W
4 50W to several kws utput Data DAA Series General conditions : 5 C ambiant. ) Recycle input voltage or inhibit to restart (>00ms off) - ) utput voltage 95 % of nominal - ) utput voltage < 50mV - ) Nominal input, full load, 0MHz bandwidth - 5) No load to full load, nominal input Model V W V V A A A mvpp % % Number Nom Nom Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Typ Vin wide DAA-V50W-x V DAA-575W-x 5V DAA-6V500W-x 6V DAA-800W-x 8V DAA-00W-x V DAA-500W-x 5V DAA-00W-x V DAA-800W-x 8V DAA-600W-x 6V DAA-800W-x 8V Vin DAA-V00-x V DAA-V6-x V DAA-500-x 5V DAA-500-x 5V DAA-6V500-x 6V DAA-800-x 8V DAA-00-x V DAA-00-x V DAA-500-x V DAA-500-x 5V DAA-500-x 5V DAA-00-x V DAA-00-x V DAA-500-x V DAA-800-x 8V DAA-800-x 8V DAA-8500-x 8V DAA-600-x 6V DAA-600-x 6V DAA-800-x 8V DAA-800-x 8V Vin DAA8-V6-x V DAA8-500-x 5V DAA8-800-x 8V DAA8-500-x V DAA x 5V DAA8-500-x V DAA x 8V DAA x 6V DAA x 8V Vin DAA7-V6-x V DAA7-500-x 5V DAA7-800-x 8V DAA7-00-x V DAA7-500-x 5V DAA7-00-x V DAA7-800-x 8V DAA7-600-x 6V DAA7-800-x 8V Vin DAA0-V50-x V DAA0-V00-x V DAA0-500-x 5V DAA0-500-x 5V DAA0-800-x 8V DAA0-800-x 8V DAA0-00-x V DAA0-00-x V DAA0-500-x 5V DAA0-500-x 5V DAA0-00-x V DAA0-00-x V DAA0-800-x 8V DAA0-800-x 8V DAA0-600-x 6V DAA0-600-x 6V DAA0-800-x 8V DAA0-800-x 8V utput Voltage utput Power Voltage Adjustment vervoltage Protection () utput Current utput Current Limit () Short Circuit Current () utput Noise () Efficiency Load Regulation (5)
5 50W to several kws utput Data DAB Series General conditions : 5 C ambiant. ) Recycle input voltage or inhibit to restart (>00ms off) - ) utput voltage 95 % of nominal - ) utput voltage < 50mV - ) Nominal input, full load, 0MHz bandwidth - 5) No load to full load, nominal input Model V W V V A A A mvpp % % Number Nom Nom Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Typ Vin wide DAB-V75W-x V DAB-575W-x 5V DAB-5W-x V DAB-550W-x 5V DAB-50W-x V DAB-850W-x 8V DAB-6-50W-x 6V DAB-850W-x 8V Vin DAB-V00-x V DAB-V50-x V DAB-550-x 5V DAB-500-x 5V DAB-6V500-x 6V DAB-800-x 8V DAB-50-x V DAB-00-x V DAB-50-x V DAB-550-x 5V DAB-500-x 5V DAB-50-x V DAB-00-x V DAB-50-x V DAB-850-x 8V DAB-800-x 8V DAB-850-x 8V DAB-650-x 6V DAB-600-x 6V DAB-850-x 8V DAB-800-x 8V DAB-850-x 8V Vin DAB8-V50-x V DAB8-500-x 5V DAB8-50-x V DAB8-550-x 5V DAB8-50-x V DAB8-850-x 8V DAB8-650-x 6V DAB8-850-x 8V DAB8-800-x 8V Vin DAB7-V00-x V DAB7-550-x 5V DAB7-850-x 8V DAB7-50-x V DAB7-550-x 5V DAB7-50-x V DAB7-850-x 8V DAB7-650-x 6V DAB7-850-x 8V Vin DAB0-V75-x V DAB0-V00-x V DAB0-500-x 5V DAB0-550-x 5V DAB0-850-x 8V DAB0-50-x V DAB0-00-x V DAB0-550-x 5V DAB0-500-x 5V DAB0-50-x V DAB0-00-x V DAB0-850-x 8V DAB0-800-x 8V DAB0-650-x 6V DAB0-600-x 6V DAB0-850-x 8V DAB0-800-x 8V utput Voltage utput Power Voltage Adjustment vervoltage Protection () utput Current utput Current Limit () Short Circuit Current () utput Noise () Efficiency Load Regulation (5)
6 50W to several kws utput Data DAC Series General conditions : 5 C ambiant. ) Recycle input voltage or inhibit to restart (>00ms off) - ) utput voltage 95 % of nominal - ) utput voltage < 50mV - ) Nominal input, full load, 0MHz bandwidth - 5) No load to full load, nominal input utput Voltage utput Power Voltage Adjustment vervoltage Protection () utput Current Model V W V V A A A mvpp % % Number Nom Nom Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Typ Vin wide DAC-V50W-x V DAC-550W-x 5V DAC-00W-x V DAC-500W-x 5V DAC-00W-x V DAC-800W-x 8V DAC-600W-x 6V DAC-800W-x 8V Vin DAC-V50-x V DAC-V75-x V DAC-550-x 5V DAC-500-x 5V DAC-55-x 5V DAC-800-x 8V DAC-50-x V DAC-00-x V DAC-50-x V DAC-550-x 5V DAC-500-x 5V DAC-550-x 5V DAC-50-x V DAC-00-x V DAC-50-x V DAC-850-x 8V DAC-800-x 8V DAC-850-x 6V DAC-650-x 6V DAC-600-x 6V DAC-850-x 8V DAC-800-x 8V DAC-850-x 8V Vin DAC8-V50-x V DAC8-V75-x V DAC8-550-x 5V DAC8-575-x 5V DAC8-500-x 5V DAC8-800-x 8V DAC8-850-x 8V DAC8-75-x V DAC8-50-x V DAC8-575-x 5V DAC8-550-x 5V DAC8-75-x V DAC8-50-x V DAC8-875-x 8V DAC8-850-x 8V DAC8-650-x 6V DAC8-875-x 8V DAC8-850-x 8V Vin DAC7-V75-x V DAC7-550-x 5V DAC7-800-x 8V DAC7-50-x V DAC7-550-x 5V DAC7-50-x V DAC7-850-x 8V DAC7-650-x 6V DAC7-850-x 8V Vin DAC0-V50-x V DAC0-575-x 5V DAC0-875-x 8V DAC0-00-x V DAC0-500-x 5V DAC0-00-x V DAC0-800-x 8V DAC0-600-x 6V DAC0-800-x 8V DAC0-850-x 8V utput Current Limit () Short Circuit Current () utput Noise () Efficiency Load Regulation (5)
7 Trim PG PG- -S Trim PG- PG PWERB Defense Line 50W to several kws Manual Mechanical DAA Series 5mm 6 trous diam:.5mm mm IN _ Inh -In -Inh S -UT UT 5mm Mechanical DAB Series 5mm J 6 trous diam:.5mm mm J J J Inh Inh Inh- Inh- Pr Pr Pr- Pr- J J5 J6 P J0 0mm Mechanical DAC Series 5mm trous diam:.5mm mm J J IN _ Inh -In -Inh J J5 J6 P J0 -UT UT 00mm
TEP 75WI Series, 75 Watt
TEP 75WI Series, 75 Watt Features UL 60950-1 Rugged, compact metal case Screw terminal adaptor available for easy connection EN 50155 approval for railway applications Optional DIN-rail mounting kit Ultra
More informationTEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter Measures: 2.40 x 2.28 x 0.50
Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 91% No minimum load Soft start Ajustable
More informationTEP 100WIR Series, 100 Watt
TEP 100WIR Series, 100 Watt Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 92% No minimum
More informationPOWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
More informationC B. Models. Ultra wide 4:1 input voltage 20 W DC/DC. edition and EN55032 class A
DC/DC Converter Ultra wide 4:1 input voltage 20 W DC/DC converter in a 1.6 x 1 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationC B. Models. Operating up to 5000m altitude 5 year product warranty
DC/DC Converter Wide 2:1 input voltage 10 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1
More informationPackage (4) Control Logic (3)
Features Regulated Converters 2:1 Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Fixed Operating Frequency Description The series / converters are certified
More informationDatasheet IC266_3 24Vin 110Vin / ±24Vout, 2x75W
intrexis AG Tobelraastrasse 4 CH-8212 Neuhausen am Rheinfall SWITZERLAND Tel +41 (0)525111190 www.intrexis.ch Fax +41 (0)525111199 info@intrexis.ch Datasheet IC266_3 24Vin 110Vin / ±24Vout, 2x75W Rev00
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 84% Fixed Operating Frequency Six-Sided Continuous Shield Description The series wide input range / converters
More information(877) CPCI-3U Series. Input Voltage Range AC Input. Input Voltage Range 48VDC Input. Input Voltage Range 24/28VDC Input
(877) 634-0982 www.digipwr.com 200 300 Watt Compact PCI Power Supply Product Specification Universal AC Input with PFC, 48VDC or 24/28VDC Input Key Product Features Up to 3U Cabinet Environmentally Rugged
More information(877) CPCI-6U Series. Input Voltage Range AC Input. Input Voltage Range 48VDC Input. Input Voltage Range 24/28VDC Input
(877) 634-0982 www.digipwr.com 350 650 Watt Compact PCI Power Supply Product Specification Universal AC Input with PFC, 48VDC or 24/28VDC Input Key Product Features Up to 650W 6U Cabinet Environmentally
More informationDC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, VDC RAILWAY APPLICATIONS
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, 14-160VDC RAILWAY APPLICATIONS FEATURES 60 Watt Output Power Extremely Wide 12:1 Input range: 9-75, 14-160 Output
More information55RQ2 3U, cpci DC/DC Converter 300 Watts Quad Outputs
55RQ2 3U, cpci C/C Converter 300 Watts Quad Outputs Features: High Power ensity, True Single Slot, 3U Package IEEE 1101.2 compliant Full Output Power at +85 C Temperature Wedgelock, Plug-in esign ESS Screened
More informationPOWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield Description The series wide range input / converters are certified to
More information2:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 2:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 88% Ultraminiature Open Frame SMD No Minimum Load Required The RP15-SOF series, are SMD
More informationQKS48T21120 DC-DC Bus Converter Data Sheet Quarter-Brick with 48VDC Input; 21A Output
Quarter-Brick with 48 Input; 12 @ 21A Output Benefits Simplifies power system design; reduces design time and technical risk Compatible with all (12 Vin nom.) POLs available in the market Applications
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : SPECIFICATION MODEL OUTPUT INPUT PROTECTION OTHERS NOTE DDR-120A-12 DDR-120A-24 DC VOLTAGE RATED CURRENT
More informationENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5
Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...
More informationFDC20-48 S 05 W - HC PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC20-48 S 05 W - HC Series Name Input Output Output Input Assembly Option Voltage Quantity
More informationIndustrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
More informationPackaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
More informationRailway & Industrial Power Solutions
Railway & Industrial Power Solutions belfuse.com/power-solutions DC-DC Converters for General Purpose Rail Applications RCM Series The RCM Series (Railway Chassis Mount) DC-DC converters are reliable power
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Fixed Operating Frequency Six-Sided Continuous Shield Description The series / converters are certified
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required Description The wide range input
More informationSeries AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
More informationEnclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More information40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
More informationIndustrial Power Supplies
, Rugged metal case for harsh industrial environments Industrial operating temperature range: 25 C to +70 C Overload and and overtemperature protection Power boost up to 120 % Power-Good signal Shock and
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationRhino PSM Power Supplies. Operating Instructions
Rhino PSM Power Supplies Operating Instructions RHINO Power Supplies PSM Series Description The PSM power supplies are built-in units. The mounting position for PSM power supplies must fulfill the requirements
More informationSafety Standards. Model Number: Unit Weight:
MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating
More informationSwitching Power Supplies
, RoHS compliant Features Ultracompact Open-Frame Switching Power Supply Easy Connection via Screw Terminal Block Universal Input 85 264 VAC, 50/60Hz Industrial Grade Components ow Ripple and oise Overload
More informationUniversal input VAC <150mW No load power consumption
Features Regulated Converter Description Universal input 85-64VAC
More informationMilitary (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial
M3110 SERIES ULTRA-LOW INPUT CURRENT THD, HIGH POWER FACTOR, HIGH EFFICIENCY, SINGLE OUTPUT 3-PHASE AC / DC CONVERTERS Up to 1 000 W Applications Military (Airborne, ground-fix, shipboard), Ruggedized,
More informationC1U-W Tx Series
www.murata-ps.com PRODUCT OVERVIEW The C1U-W-1200 is a 1200 Watt universal AC input, power-factor-corrected (PFC) front-end power supply for general applications. The main output is 12V with a standby
More informationPFE-S SERIES Single Output AC-DC Power Module UL / EN60950 Low Voltage Directive CSA C22.2 No Features Model naming method
PFE-SSERIES 2 29 PFE300S PFE300S Specifications Voltage Range (*2)(*5) V AC85-265 Frequency (*2) Hz 47-63 Input Power Factor (min) (*1)(*5) 0.95 Efficiency (typ) (*1) 81 / 83 83 / 85 Current (*1) A 4.0
More information48V 2KW 1U AC-DC Power Supply PS Electrical Specification for: Telkoor Model:
Electrical Specification for: Telkoor Model: 48V 2KW 1U AC-DC Power Supply PS-2048 SCALE RELEASE DATE 26/06/11 SHEET 1 OF 11 REVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
More informationConstant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
More informationParameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationC1U-W Tx Series AC/DC Front End Power Supply
www.murata-ps.com PRODUCT OVERVIEW The C1U-W-1200 is a 1200 Watt universal AC input, power-factor-corrected (PFC) front-end power supply for general applications. The main output is 48V with a standby
More informationSeries Specifications Ta= 25 C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Min. Typ. Max.
Features Regulated Converter Universal input VAC 4W PCB mount package
More informationTTX400-3U-1S Watt, 3U, 1 Slot, 24VDC Input, CompactPCI Power Supply. CompactPCI POWER SUPPLY
350 Watt, 3U, Slot, 4VDC Input, CompactPCI Power Supply The TTX Series from Tracewell Power offers a wide variety of form factors, utilizing a new topology which provides excellent power density and efficiency.
More informationFeatures. Regulated Converters. RP10-AW 10 Watt 1 x1 Single & Dual Output RP10- _AW/_- DC/DC Converter
Features Regulated Converters : wide input voltage range.kv isolation UL0950- certified Efficiency up to 9% Six-sided continuous shield No minimum load required Description The series are wide input voltage
More informationGSP750 Series. 750 Watts. AC-DC Power Supplies. Models & Ratings. Input
C-DC Power Supplies 750 Watts 900 W Peak Power Rating for 100 ms Universal 80-264 VC Input IT & Medical Safety pprovals 1.0 W Standby Power -40 C to +70 C Operation Remote On/Off 5 V/3 Standby Output 3
More informationFeatures. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter
Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF
More informationNote1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms
Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available
More informationPackaging (4) Isolation Voltage (3) nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1D series -40 C to +95 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationOrdering example: 40W, VDC in, single 12Vout, DIN Mount = RPMD SGW
Features Regulated Converters Class B EMC Filter built-in Reverse Polarity Protected Inrush Current Limiting (Soft Start) Output Trim Potentiometer Output LED Indicator DIN Rail Mounting or Panel Mount
More informationSeries AM20EW-NZ 20 Watt DC-DC Converter
FEATURES:0 Series AM0EW-NZ Models Single output Model Input Voltage (V) Efficiency up to 90% On/Off Remote Control Ultra-wide : Input range Over Voltage Protection No-load consumption 0.W I/Output Isolation
More informationNEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
More informationDDR-120 series. 120W DIN Rail Type DC-DC Converter
DIN Rail Type DC-DC Converter + is a DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION
More informationORDERING INFORMATION SEE PAGE 6
400W High Density Medical/Industrial Grade Open Frame Power Supplies Medical Safety Approval 60601-1 3rd Edition 2 MOPP Class 2 for home use medical applications (BSM400) Single output with 5V Auxiliary
More information-48 VDC Input. ETSI Compliant. NEBS Compliant. Convection-cooled. Covered Versions Available
DCM Series Open Frame Telecom DCDC Converter 48 VDC Input ETSI Compliant NEBS Compliant Convectioncooled High Power Density in Small Package Sizes Covered Versions vailable The DCM family complements the
More informationSeries AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
More informationFEATURES. Nominal Output Voltage and Current
5W, AC-DC converter FEATURES 85-264V Universal AC or wide 100-370V DC Input Operating ambient temperature range: -40 to +85 High I/O isolation test voltage of up to 4000VAC Regulated output, Low ripple
More informationDescription. Protection Features. Operational Features. Mechanical Features. Control Features. Safety & EMC
48Vdc Input, 5Vdc@20A Output Eighth-brick DC-DC Converter AVO100-48S05B Description The AVO100-48S05B is a single output DC-DC converter with standard eighth-brick outline and pin configuration. It delivers
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More informationOrdering Information. Three-phase Input Switch Mode Power Supply S8VT S8VT. Model Number Legend
Three-phase Input Switch Mode Power Supply S8VT DIN-rail mounting, Power Supply with a range of 5 A to 40 A output current 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output Higher stability, lower
More informationVITA 62 VPX-6U 18V - 40V. Input EMI. Operation: -40 C to 85 C (at Card Edge) VPX Features. Outputs: VS1:
VITA 62 Compliant Power Supply 18V - 40V Input EMI Continuous Input Voltage Filtering 5 800W 91% Outputs Maximum Output Power Typical Efficiency Operation: -40 C to 85 C (at Card Edge) VPX Features Outputs:
More informationSeries AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Operating Temp: -40 C to +80 C or -25 C to +80 C Input: 90-264, 47-440Hz, or 130-370VDC Over load, Over, Short Circuit Protection
More informationUniversal input VAC <250mW No load power consumption -25 C to +80 C Operating temperature, with derating
Features Universal input VAC
More informationMPV1060RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1060RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 5W & 10W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse
More informationENGINEERING SPECIFICATION SHEET SPEC. Revision History
SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension
More informationSnaptec Australia Pty. Ltd.
KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage
More informationUniversal Power Supplies
, Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC
More informationMPV1560RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1560RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 15W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse Input
More information150 watt DC/DC solutions include 91% efficient, 1/4-brick converters and MIL-STD-461F EMI filters
QB150 single-output DC/DC converters and QBF150 EMI filters 150 watt DC/DC solutions include 91% efficient, 1/4-brick converters and MIL-STD-461F EMI filters Compliances MIL-STD-704D input transient protection
More informationContinuous Input Voltage Filtering Outputs Maximum Output Power Typical Efficiency Operation: -40 C to 85 C (at Card Edge)
VITA 62 Compliant Power Supply 18V - 40V Input EMI 6 500W 91% Continuous Input Voltage Filtering Outputs Maximum Output Power Typical Efficiency Operation: -40 C to 85 C (at Card Edge) VPX Features Outputs:
More information48V 1.5KW 1U AC-DC Power Supply Electrical Specification for: Telkoor Model: 0/ 7 SHEET 1 OF 1
Electrical Specification for: 48V 1.5KW 1U AC-DC Power Supply Telkoor Model: 900-1548-0000 0/ 7 SHEET 1 OF 1 REVISION HISTORY Rev Level A B Rev Date Change Made Reason for Change Effective Approved 22/06
More informationRhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
More informationMMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
More informationRT4B-110V/12A RECTIFIER
The RT4B-110V/12A is a switched mode rectifier (SMR) module designed to provide up to 12A of output current into a 110V nominal system. It can be used with or without a cooling fan. With a fan it runs
More informationSafety Standards. Model Number:
060AAS19 B Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationCPS Industrial Power Supply
CPS Industrial Power Supply Power Supply Specification Model Number: FSAK C Series Industrial quality, 1U high, multiple output power supply AC Input: full range, active PFC. DC Output: 6 configurable,
More informationSwitch Mode Power Supply S8VT 120/240/480/960 W Models
Switch Mode Power Supply 120/240/480/960 W Models Natural Cooling Three-phase Power Supply Range from 5A up to 40A with Output Voltage of 24VDC 3 phase 400 to 500 VAC 5, 10, 20 and 40 A; 24 VDC output
More informationPower supply CP-C 24/5.0
2CDC 271 064 F0004 Features Supply voltage ranges: 85-264 V AC, 100-350 V DC Output voltage adjustable from 22-28 V DC, default setting 24 V DC 0,5 % 5 A output current Open-circuit, overload and continous
More informationSPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM40-G)
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series / converters are
More informationRailway Products. by Power-One
by Power-One Railway Products The world s first 10:1 input DC-DC converter with up to 300W and >92.5% efficiency The new HR-Series is the latest MELCHER cassette innovation DIN RAIL PRODUCTS Model Type
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationWatts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationVPX55H-3 3U VPX DC/DC Converter
3U VPX DC/DC Converter 500 Watt Ruggedized Converter Plug-in Module, Conduction-Cooled, Six Outputs Description NAI s is a that plugs directly into a standard 3U VPX chassis with a VITA 62 0.8 power supply
More informationMB2000ERUI. High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers. Key Features:
MB2000ERUI High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers Key Features: 20W Power 4:1 Input Voltage Range EN 60950 Approved 3,000 Isolation Efficiency to 90% Meets EN 55032 Compact 1 x 2
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationEfficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
More informationTest and Measurements Automated Systems Component Device Testing Semiconductor Processing & Burn-in Aerospace & Satellite Testing
The TSR10 is a 10 kw, 3-phase input voltage 360-440 VAC power supply with an adjustable DC output voltage between 0.5 V and 50 V and output current between 0.5 A and 200 A. The power supply has been designed
More informationVin= 24VDC Vout= full load with normal start-up time, no external components with <1 second start-up time + diode protection circuit
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L*W*H=11.6*8.5*10.4mm) Wide input range (5V - 4V) Short circuit
More informationM5100 Heavy Industrial Pressure Transducer
CE Compliance Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations DESCRIPTION The M5100 series pressure transducers from the Microfused line of MEAS, set a new price
More information400AUS24 B MDS AUS. MDS Medical AC-DC Open Frame 24Volt, 400Watt / MDS-400AUS24 B. General Description. Model Information. Model Numbering ```
400AUS24 B Highlights & Features Safety Approvals to IEC 60601-1 3.1rd ed. & IEC 60950-1 Compliant with IEC 60601-1-2 4th Ed. Requirements Low touch current (
More informationCPCI - 6U - DC - 350W
Electrical Specification for: CPCI - 6U - DC - 350W Telkoor Part Number: 900-6001-0000 Approvals Name Date Written by: S. Sadot 13/3/08 Engineering: M. Heller 13/3/08 Sales & Marketing: B. Steinfeld 13/3/08
More informationAC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
More informationSeries AMEL20-MAZ 20 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Energy Star compliant Operating Temp: -40 o C to +70 o C Ultra-small package Over load, Over, Short Circuit Protection Up
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
More informationVITA 62 6U ISOLATED 660W 115VAC, 400Hz POWERSUPPLY
L Datasheet VITA 62 POWER SUPPLY LINE Key Features: 1 phase 115VAC 400Hz with 28V backup input 150msec hold time at 380W 1500V Isolation Between Input /Output Active Input EMI Filtering Transient look
More informationDatasheet VITA 62 POWER SUPPLY LINE. VITA 62 6U ISOLATED 1200W 115VAC 400Hz POWER SUPPLY. Key Features:
L Datasheet VITA 62 POWER SUPPLY LINE Key Features: 115V 400Hz Continuous Input Voltage 100msec hold time at 600W 2500V Isolation Between Input /Output Active Input EMI Filtering Transient look ahead/cut-off
More information