Heimdallr RL User Manual

Transcription

1 Heimdallr RL User Manual Heimdallr RL User Manual Ver 1.2

2 Heimdallr RL User Manual Ver 1.2 ii

3 Heimdallr RL User Manual Ver 1.2 Publication History Version Date Firmware Version March September 2016 iii

4 Heimdallr RL User Manual Ver 1.2 ABOUT THE USE OF THIS PRODUCT After unpacking this product, read the owner s manual carefully, and follow all the operating procedures and other instructions. Users of the system are responsible for checking and complying with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio signals. The Company shall not be held responsible for the use of this system in violation of current laws and statutes. ABOUT THIS DOCUMENT This manual has been compiled with great attention and care. The information it contains has been thoroughly verified. The text was complete and correct at the time of printing. Due to further product development, however, the contents of this document may change without prior notice. The Company accepts no liability for damages resulting directly or indirectly from errors, omissions, or discrepancies between this guide and the product described. All trademarks mentioned belong to their owners, third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner's benefit, without implying a violation of copyright law. RELATED DOCUMENTS This document may be referenced by or may refer to the following relevant manuals: Mobile DVR Hardware Instruction Manual H.264 DVR Operation Manual iv

5 Heimdallr RL User Manual Ver 1.2 Table of Contents Publication History...iii Table of Contents...v 1 Getting Started Heimdallr RL Overview Hardware/OS facilities HeimdallrRL Installation Remove HeimdallrRL HeimdallrRL home screen HeimdallrRL solution chart Navigation Login to the HeimdallrRL HeimdallrRL (Client) Main Screen Functions of HeimdallrRL (client) menu Split views control bar Vehicle DVR and camera connection GPS route and viewing screen Right-click functions Floating button functions Config mode Group Setting Vehicle Setting User Setting System Info Setting Playback Mode Search the playback file Video Control Bar Playback frames Recorded Time Scroll Bar Floating button functions Event Mode Connect Vehicle DVR with Heimdallr Vehicle DVR Setting Connect HeimdallrRL v

6

7 Chapter 1 1 Getting Started 1

8 Heimdallr RL User Manual Ver Heimdallr RL Overview HeimdallrRL is Heimdallr without Relay version. It s the real-time surveillance system. User can use default user name and password admin to log-in to the system and change the user name / password, proceed the System setup, Authentication, Vehicle Cameras viewing, recording, surveillance, GPS Map, video picture capture of the connecting vehicle DVRs Hardware/OS facilities Minimum recommended hardware requirements: Maximum Support Channel quantity CPU: Pentium Dual Core E Ghz Memory: DDR2 800MHz 2GB Graphics Card: Intel G41 Express Chipset 1GB 50 channel under 64 split-screen OS: Windows XP, Window 7 32/64 bits Windows bits Chinese/English Operation System 2

9 Heimdallr RL User Manual Ver HeimdallrRL Installation (1) Double click the program icon to setup the HeimdallrRL(without Relay server) program. CAUTION If the OS is Win 7 of your PC,please run the program as an administrator. If the OS is XP, double-click on the icon. (2) Windows OS platform requires that the application be run as the administrator user. Picture pops-up. (3) Click to accept the license agreement before going next step. (4) Browse to select folder to install Heimdallr client program. 3

10 Heimdallr RL User Manual Ver 1.2 (5) Click Heimdallr to install the program. (6) Click to create the shortcut in the Start Menu folder. And click the Next to continue the setup process 4

11 Heimdallr RL User Manual Ver 1.2 (7)Click to create the desktop icon for login Heimdallr easily. User can find the icon on the desktop screen once finished the set up procedure. (8) Click install to continue with the installation. 5

12 Heimdallr RL User Manual Ver 1.2 (9) Finish the installation. Click Launch Hemidallr to login to the program. 6

13 Heimdallr RL User Manual Ver Remove HeimdallrRL Click the start & All Programs to open the Heimdallr folder. Then click Uninstall Heimdallr, follow the pop-up dialog windows to uninstall the program. CAUTION User can find Heimdallr setting data at the path Computer. local disk ( C ) Users Administrator AppData Roaming Heimdallr even when the program had been removed. 7

14 Heimdallr RL User Manual Ver HeimdallrRL home screen The home screen is a start point to give you instant access to Heimdallr screen and client programs. HeimdallrRL home screen : 8

15 Heimdallr RL User Manual Ver HeimdallrRL solution chart HeimdallrRL is the client program, provides System setup, Authentication, Vehicle Cameras viewing, recording, surveillance, GPS Map, video picture capture of the connecting vehicle DVRs. 9

16 Chapter 2 2 Navigation 10

17 2.1 Login to the HeimdallrRL After installed the program, double click the Heimdallr icon from the desktop. There will be a pop-up dialogue for user to login to the server or client program. Server Mode:Click to login to the HeimdallrRL. Client Mode:Click to login to the Heimdallr Client which supports Heimdallr Relay server. UserName:The default user name is admin. Password : The default password is also admin. 2.2 HeimdallrRL (Client) Main Screen The Heimdallr client main screen will be seen as following: 11

18 2.2.1 Functions of HeimdallrRL (client) menu The following table shows the function of each number. Number Button Name Function/Description 1 Viewing real-time image & map of the vehicle DVRs Search the event list via Normal/ GPS/Playback-list log. Please refer to the chapter 2.7 Retrieve historical recorded images & route map. Please refer to the chapter 2.5 Add/Delete/Modify the Vehicle / Group /User setting & setting of System info. Please refer to the chapter 2.2 &2.3 Snapshot: Click to take the snapshot of the viewing screen and route map. 6 PTZ control, (coming soon) 7 Dual Audio(coming soon) 12

19 Number Button Name Function/Description Click to pop-up the information of the vehicle & DVR Split views control bar The following table shows the function of each number. Number Button Name Function/Description 1 Click to the first page of the channels split views 2 Click to last page of the channels split views 3 Click to next page of the channels split views 4 Click to the last page of the channels split views 5 Enter the number and click go to that page of the split view 6, 7, 8, 9, 10,11,12,13 single-channel, 4-channel, 6-channel,9-channel split-view 13-channel,16-channel,32-channel,64-channel split view Vehicle DVR and camera connection This area listed out the connecting status of the vehicle DVRs and cameras. User can click - & + to have downward or upward connection status. 13

20 No. Icon Description 1 The fleet (vehicle) group 2 Connected Vehicle DVR 3 Connected Camera 4 Disconnected Camera 5 Disconnected Vehicle DVR GPS route and viewing screen 1:Drag and drop the connected vehicle DVR ( ex. ) to the split-screen of live view screen at the right part of the main screen. The GPS route of this DVR will be showed as following. 2:Drag and drop the connected camera( ex. ) to the split-screen of live view screen at the right part of the main screen. The live viewing of this camera will be showed as following. 3: Not Connected means vehicle DVR is disconnected (ex. ) 4 Video Loss means channel camera is disconnected (ex. ) 14

21 The Map view displays the time-history of vehicle s journey (route) position. 1. Select area: Click the rectangle then move the mouse to indicate the area that you would like to know if the vehicle route appear here. ( the percentage will become much bigger than the previous view of the map. Click the hand to stop indicating the area. 2. Zoom in / Zoom Out : Click + or - to zoom in or zoom out the map view. 3. Route info: System will display the vehicle ID, Speed and recorded time of the PVF file. 4. SetMap: Right click the mouse to set GPS routes of multiple vehicle DVRs at the same map. 15

22 2.2.5 Right-click functions Right-click the GPS route and viewing screen to go into the quickly setup menu. Menu Function/Description Click to view the selected camera Click to view in 4-channel split-view Click to view in 6-channel split-view Click to view in 9-channel split-view Click to view in 13-channel split-view Click to view in 16-channel split-view Click to view in 32-channel split-view Click to view in 64-channel split-view Click to view specific one camera view Click to set viewing of the GPS route Click to set viewing of the recording image Click to clear the screen Set Map Click Set Map & choose the DVR user name form the Vehicle menu. Click OK to show the GPS route of the viewing screen Set Map Click Set Video & choose the DVR user name form the Vehicle menu. And click the camera channel number. Click OK to show the video of this camera at the viewing screen. 16

23 2.2.6 Floating button functions Move the mouse to the viewing screen under Preview mode. There will be 4 floating buttons at the left-up corner. Number Button Name Function/Description 1 2 Click to get Vehicle DVR information of viewing image. (coming soon) Click to play the Voice of viewing image. The icon will be in blue color. Click to take the snapshot(picture) of viewing channel or viewing main screen. It will pop-up following window to confirm that the snapshoot photo had been captured successfully. 3 4 Click to start Recording of viewing image. The icon will be in blue color Click the icon again to finish the recording. 2.3 Config mode Click on the Control Bar to enter Config setting menu 17

24 Number Button Name Function/Description 1 Click to go into the Group, Vehicle, User Setting and System info. Please refer to the chapter 2.2.1~ Showing the program information. 3 Click to enable the setting then exit the window. 4 Click to enable the setting & stay at the window. 5 Click to cancel the setting then exit the window Group Setting Click the Group Setting to define all your DVRs as different groups via Add Group, Delete Group and Modify the Group information at this system. 18

25 Add Group While adding a new group at this system, please fill in the blanks with its Name / Address and Contact info. User can define the group name as different fleets group. Delete Group Select to delete one or more groups from the group list. Click Yes to delete all Vehicle(DVRs). Click No to move all Vehicle(DVRs) of this group to the default group. Click Cancel to stop deleting the group and exit this setting screen. 19

26 Modify Group Double click or select one group from the group list then modify its setting. CAUTION User must click the OK or, Apply button of the config screen to enable the add/delete/modify group setting Vehicle Setting Click the Vehicle Setting to Add/Delete/Modify the vehicle DVR information. 20

27 Add Vehicle Click Add Vehicle button, a dialog pups up as following: 21

28 Number Vehicle Info Function/Description 1 Enable 2 Select Group 3 4 Description UserName Password Confirm PW Model Channel Count 5 Video Param Click to show this vehicle DVR info within the vehicle group list. Click to choose the group or keep using the default as the group name for this new Vehicle DVR Fill in the vehicle DVR s information includes its description, user name and password. The filled up words must be less than 30 characters Click to choose the model name then its camera quantity drop-down menu will be list below. 4 -channel cameras for Model504/505/806/868/ channel cameras for Model508/808/ channel cameras for Model516/816 Click to choose the FPS(Frames Per Second) / Resolution of video transmission. Click Apply button to valid the setting parameter. 6 Add Click to add the vehicle DVR. 7 Cancel Click to cancel of adding the vehicle DVR. Delete Vehicle Select to delete one or more vehicle DVR from the list. Click Yes to delete all Vehicle(DVRs). Click No to stop deleting. System will pop-up the reminding windows to let user confirm that if they would to deleted more than 5 vehicle DVR one time. 22

29 Modify the password of Vehicle DVR Double click or select one vehicle DVR from the group list then change its description password setting. CAUTION User must click the OK or, Apply button of the config screen to enable the add/delete/modify vehicle DVR setting. 23

30 2.3.3 User Setting Click the User Setting to can Add, Delete and Modify the User ID/Description and User Name of each HeimdallrRL system. Add User 24

31 Delete User Number Vehicle Info Function/Description 1 Description UserName Password Confirm PW 2 Authority 3 Add 4 Cancel Fill in the Heimdallr system information includes its description, user name and password. The filled up words must be less than 30 characters Authorize viewing th client systems, click Select all to view all client systems. Click to add the Heimdallr to the user list and exit the setting menu. Click to cancel of adding the Heimdallr to the user list and exit the setting menu. Click the user from the list then click the Delete User button. Then click the Yes of the pop-up window to confirm the deleting client user. Please be noted that admin is the default user from the system and it can not be deleted from the list. Modify User Double click the user or click the user from the list & click the Modify User button to change the user description and change its password. 25

32 2.3.4 System Info Setting Click to setup the setting of the HemidallrRL (client) system. Number Button Name Function/Description 1 The default Port No. is The path to save the snapshot file, click Browse to change the path. 3 The default file type is.bmp 4 The path to save recorded file, click Browse to change the path. 26

33 Number Button Name Function/Description 5 User can choose to save the file at.avi or.pvf type 6 The version information about the Hemidallr program. CAUTION User must click the OK or, Apply button of the config screen to enable the setting. 2.4 Playback Mode Click on the Control Bar to enter Playback menu The following table shows the function of each number. Number Function Description 1 2 Search Criteria & Search Result Recorded time scroll bar 3 Video control bar 4 Playback frames Click to specify the searching criteria of the recorded image. Event-log will be listed out after clicking the Search button The horizontal scroll bar for search the recorded data of specific time by mouse Plays forward faster, Plays forward,start/pause the video playback, Plays backward, Plays backward faster Retrieve historical recorded images includes the GPS route of selected vehicle 27

34 Number Function Description Search the playback file Search Criteria Click to take the snapshot(picture) of viewing channel or viewing main screen. Start Time : click the calendar menu to select the date and time when the event took place. End Time : click the calendar menu to select the date and time when the event stopped recording. Select Vehicle: click the select the vehicle (DVR) form the connected DVR list. Search Result Event Serial: Series Number of recorded data provide by system Event Time: The Time event took place Record End Time: The time event recording stopped NOTE Click to retrieve the specific even video from the search result list Video Control Bar Click to play/pause/play forward faster/play backward faster /play forward /play backward of the event that has been selected Button Funciton/Description Click to play the recorded file form the file log list. And the control bar will keep at pause status icon. Click to play previous recorded file from the file log list Click to play next recorded file from the file log list Click to rewind at 1/2/3/4/5 times. Click to play forwarder faster at 1/2/3/4/5 times. 28

35 2.4.3 Playback frames Double click the file from the recorded file log list or click specific file then click to retrieve historical recorded images includes the GPS route of selected vehicle DVR. The default play back screen will be 6-split view. 4-channel cameras will be with 6- split view. 8-channel cameras will be with 9-split view. The default setting of 1 st split view is GPS route map. Double click the specific view to zoom-in the single view & the selected view will be with blue frame Recorded Time Scroll Bar Click to view the recorded data of specific time by mouse The scroll bar will begin at 00:00 of the date user clicked at the Start Time The scroll bar will end at 00:00 of the next date user click at the End Time The purple area is the time which with recording video. Then black area is the time without recording video. The green line points out the time which current playback view Floating button functions Move the mouse to the viewing screen under Preview mode. There will be 4 floating buttons at the left-up corner. The details will be same as chapter Event Mode 29

36 Click on the Control Bar to enter Event Viewer menu StartTime: indicates the start time of events took place. The user can click to choose the year, month & date from the Calendar Menu EndTime: indicates the end time of events ended. The user can click to choose the year, month & date from the Calendar Menu Vehicle: Specifies the vehicle (DVR ) which events took place Event Type: Filters event log by type. Event logs are classified as NONE, General Event Log, Record Event Log, Hardware Event Log, Warning Event Log Speed Event Log, Collision Event Log, Temperature Event Log Search: Click to list out the search result. Search result list: Different event will be corresponding to different parameters Event Type General Event Log Record Event Log Hardware Event Log Warning Event Log Speed Event Log Collision Event Log Temperature Event Log Corresponding parameter 30

37 2.6 Connect Vehicle DVR with Heimdallr Vehicle DVR Setting Turn of the vehicle DVR which you would like to connect with Heimdallr Replay Server. Go to Main Menu Hardware Setup Network Setup Event Notification Setup CMS Server Setup. Activate Service Click Enable to connect this vehicle DVR. Server Address Fill in the HeimdallrRL server s IP address. Port The default Port number is Login ID Set the ID name of this vehicle DVR. This login ID must be identical with the UserName you fill at HeimdallrRL( Client )Vehicle Setting. 31

38 Login Password Set the Password of this vehicle DVR. This login password must be identical with the Password you fill at HeimdallrRL(Client ) Vehicle Setting. CAUTION After setting, user should click EXIT & Save the setting of the DVR setting menu to enable the changed setting Connect HeimdallrRL Start HeimdallrRL program. 1 Click Config->System Info->Port. And set the Port at Click Config->Vehicle Setting->Add Vehicle. Set the user name and password of the DVR and click OK(Apply ) to enable the setting. CAUTION User must click the OK or, Apply button of the config screen to enable the setting. 32