VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
|
|
- Bruce Glenn
- 6 years ago
- Views:
Transcription
1 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES 0B GENERAL APPLICATION TECHNICAL DATA B Choice of vent to atmosphere or pipe away models. Modular design provides flexibility of field installation and allows easy reconfiguration, repair or on-site upgrading. Oversized pressure and vacuum ports provide maximum flow capacity. Easily removable hood and cover for inspection and maintenance. Seat rings are both interchangeable and field replaceable. Protective screens at pressure and vacuum ports prevent entrance of foreign matter. Outlet adapter on the B Series is one pipe size larger than the valve inlet flange to optimize flow capacity. Zero product loss when combined with a vapor recovery system. Replaceable and interchangeable pressure and vacuum seat rings. All-weather non-frosting and ice-resistant coating option available for valve seats and guides. Extended service options available for high temperature and chemical applications. The 0B and B are designed for use on atmospheric and low pressure storage tanks or for emergency venting on smaller tanks. The 0B vents to atmosphere; the B allows vapors to be piped away for recovery. Materials: Aluminum, carbon steel, stainless steel Special materials on application Sizes 0B/B: to (DN 0 to 00) B/B: x to x (DN 0 x 0 to 00 x 0) Connections: Drilled flanges settings: up to psig (0. barg). Temperature range: - to 0 F (- to C) Emerson.com/FinalControl Emerson. All Rights Reserved. VCTDS-00-EN /0
2 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES SPECIFICATIONS The 0B and B Series pressure and vacuum relief valves are available in a variety of configurations to meet your specific needs. Sizes 0B/B: (DN 0) (DN 0) (DN 00) (DN 0) (DN 0) 0 (DN ) (DN 00) Sizes B/B: x (DN 0 x DN 0) x (DN 0 x DN 00) x (DN00 x DN 0) x (DN0 x DN 0) x 0 (DN 0 x DN ) 0 x (DN x DN 00) x (DN 00 x DN 0) FLANGED CONNECTIONS - STANDARD FLANGE DRILLING Aluminum Drilled to ANSI Class 0 dimensions (flat face) Drilled to DIN ( bar) dimensions (flat face) CS, DI and SS body Drilled to ANSI Class 0 dimensions (raised or flat face) Drilled to imperial DIN ( bar) dimensions (raised or flat face Drilled to JPI or JIS (raised or flat face) - consult your sales representative Mounting studs Fractional (imperial) Metric TESTING Each valve is tested for proper setting and for a leakage rate of less than SCFH (0.0 Nm /hr) of air at 0 percent of the set point. Each valve is tested for leak tightness at percent of set point as required in API Standard 00. PARTS AND MATERIALS (see page ) Material code Item Body Aluminum Aluminum Carbon steel SS Weatherhood Aluminum Aluminum Carbon steel SS Guide stem Aluminum SS SS SS Guide posts SS SS SS SS Pallet Aluminum SS SS SS Seat ring Aluminum SS SS SS Seat ring retainer [] Polypropylene Polypropylene Polypropylene Polypropylene Insert [] PTFE PTFE PTFE PTFE Insert retainer Aluminum SS SS SS 0 Screen [] HDPE HDPE HDPE HDPE Gaskets [] Fiber Fiber Fiber Fiber O-ring [] NBR NBR NBR NBR Weights Lead Lead Lead Lead NOTE. Materials are as standard. See model option code for other materials and their associated temperature ranges.. PTFE coated aluminum may be supplied with material codes - to achieve lower settings.. All nuts and cap screws are SS.
3 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES PARTS AND MATERIALS 0B (see page ) 0 0 B (see page ) 0
4 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES SPECIFICATIONS SETTING INFORMATION Min. pressure set, oz/in Min. vacuum set, oz/in Low set range High set range Size Aluminum SS Aluminum SS (min. to oz/in ) (min. to oz/in ) (oz/in to psig) (oz/in to psig) 0B B B B Lower settings may be available. Please consult your sales representative. All valves are factory tested for leakage and correct setting prior to shipment. Certification of valve setting is available upon request. The mixed pressure/vacuum set ranges, 0 and 00 (Low pressure/high vacuum and high pressure/low vacuum) use heavier pallets and therefore have higher low set range minimums. For these cases, add the applicable value from the table (right) to the low set range minimum. (This increase does not apply for 0 and B/B.) Size Aluminum SST
5 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES DIMENSIONS 0B AND B Size code 0 Nominal pipe size (0) (0) (00) (0) (0) 0 () (00) A ⅛ () () ⅛ () (0) ⅞ () () ⅝ () B ½ () 0¾ () ⅜ (0) () ⅝ () () () C ⅞ () ¼ () () ½ () () () ⅜ () D* 0 () () ½ () () ⅝ () () ⅞ (0) D** () ¼ () ⅝ () ½ () ¾ () () ⅞ (0) SECTION A-A A B A * Low set ** High set All other figures are for the high set option. A C Lead weight (A/R) D B AND B Size code 0 SECTION A-A Nominal pipe size x (0 x 0) x (0 x 00) x (00 x 0) x (0 x 0) x 0 (0 x ) 0 x ( x 00) x (00 x 0) A () ⅜ () () () () ⅝ () ⅜ () B ¼ () ⅞ () () 0 () ⅛ (0) ⅛ (0) ¾ () C* () 0¾ () ¾ () ¾ () ⅛ () (00) () C** ½ () ½ () () () ½ () ¼ () () D ¾ () ⅜ () () 0½ () ⅛ () ⅞ () ¾ (0) E ¾ () () () ¼ () 0¾ () () () A A E D A * Low set ** High set All other figures are for the high set option. Lead weight (A/R) Dimensions are for preliminary general information and should not be used for construction purposes. Certified dimensional drawings are available upon request. C B Dimensions, in. (mm)
6 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at 0. inch of water 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
7 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at inch of water 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
8 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
9 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
10 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) 0
11 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
12 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for 0B series, set at API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
13 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at 0. inch of water 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
14 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at inch of water 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
15 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
16 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
17 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
18 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at 0 0 API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
19 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Flow curves for B series, set at API Std. 00. Certified test data by independent Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH) Thousands of cubic feet/hour at 0 F and. psia, air flow (SCFH)
20 VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES ORDERING INFORMATION SELECTION GUIDE Example: 0B T FF OP 0 0 Model Air cushion pressure/vacuum relief valve Model Vent-to-atmosphere Pipe-away Configuration OB Standard B All weather type (- F to 0 F) Size " (" x ") " (" x 0") " (" x ") 0 0" (0" x ") " (" x ") " (" x ") " (" x ") Body/trim material Aluminum/aluminum (- F to F) Aluminum/ stainless steel (- F to F) Carbon steel/ stainless steel (- F to 0 F) stainless steel/ stainless steel (- F to 0 F) Insert material T PTFE (- F to 00 F) B NBR (-0 F to F) V FKM (- F to 00 F) Flange connection FF Flat face flange drilled to ANSI 0 with fractional studs MF Flat face flange drilled to ANSI 0 with metric studs FR Raised face flange drilled to ANSI 0 with fractional studs (not available on aluminum) MR Raised face flange drilled to ANSI 0 with metric studs (not available on aluminum) DF DIN flat face flange drilling DR DIN raised face flange drilling (not available on aluminum) Gasket/O-ring and retainer/screen material OP Standard fiber/nbr and plastic (-0 F to F) OS Standard fiber/nbr and stainless steel (-0 F to F) TP PTFE and plastic (- F to F) TS PTFE and stainless steel (- F to 0 F) BP NBR and plastic (-0 F to F) BS NBR and stainless steel (-0 F to F) VP FKM and plastic (- F to F) VS FKM and stainless steel (- F to 0 F) setting range (see table, page ) 0 Low setting 0 High setting setting range (see table, page ) 0 Low setting 0 High setting Example: " size aluminum body/ss trim, PTFE insert, 0 FF flanges, standard fiber/nbr gaskets, low set pressure and vacuum, temperature range: - F to F.
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationVAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS
VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and
More informationThe 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels.
Varec Series The Series is designed to provide emergency venting of low pressure storage tanks and vessels. Introduction When the tank is exposed to abnormal internal pressure or vacuum beyond the capability
More informationVAREC 5000/5010 SERIES FLAME ARRESTERS
VAREC 000/00 SERIES FLAME ARRESTERS Group D end-of-line flame arresters with a unique extensible bank frame designed to stop the propagation of flame from external sources FEATURES 00 SERIES - HORIZONTAL
More informationThe 5400A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel.
Varec 00A Series The 00A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel. Introduction Varec s have been the industry standard for over
More informationVAREC 5000/5010. Flame Arresters
VREC 000/00 The 000/00 Series end-of-line flame arresters are used in gas piping systems, petroleum storage tank roofs and digester covers to prevent the propagation of a flame into the system. INTROUCTION
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationMark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More information98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationComposite Type Rupture Disc
Composite Type Rupture Disc 2-2202-2 COMPOSITE* TYPE RUPTURE DISC What is a Composite Type Rupture Disc? A Composite Type Rupture Disc is a differential pressure relief device used to protect pressurized
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationDouble stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More information708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
More informationSV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationBaumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationRosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
More informationComposite Type Rupture Disc
Composite 3pg.qxp 6/22/2007 10:31 AM Page 1 Composite Type Rupture Disc ORDERING To assure selection of the correct rupture disc and holder for your application, please determine the following: Preformed
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
More informationPRODUCT SELECTION GUIDE BRAND PRODUCTS SINCE 1964 RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS
SINCE 1964 PRODUCT SELECTION GUIDE RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS PRODUCT SELECTION GUIDE LAMOT QUALITY RUPTURE DISCS Since 1964, the LaMOT brand of rupture discs and rupture disc holders have
More informationDouble stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationshop online:
Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid
More informationB34 SR & SN Medium Duty Commercial&Industrial Regulator
Product Bulletin KG IMAC Systems, Inc. 90 Main Street, PO Box 0 Tullytown, PA 9007 Tel. -800-9-GAS () 9-00 Fax:() 9-98 www.imacsystems.com B SR & SN Medium Duty Benefits Economical Space-saving design
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationFlow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationPreparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
More information~. LOW FLOW Series Bellows Stem Seal. ~ a division of Jordan Valve
~. LOW FLOW 8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with a pressure-tight
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More information1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
More informationPerformance!Nxt Release
June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
More informationNEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
More informationModel VDL 115 Vacuum drying chambers for flammable solvents
Model VDL 115 Vacuum drying chambers for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationPreparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders
Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders GEP-7011 Rev. F 23777 Ref. ID: 8637 WARNING USER SHOULD READ AND THOROUGHLY
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
More informationTECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
More informationCHECK VALVE CH-1601A (EN)
CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
More informationC200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationFlow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level measurement Overview EchoMax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More information1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
More informationModel VD 23 Vacuum drying chambers for non-flammable solvents
Model VD 23 Vacuum drying chambers for non-flammable solvents A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology
More informationAB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
More informationPreparation and Installation of the HPX (DD) Rupture Disc / HPX Double Disc Holder Assembly
Preparation and Installation of the HPX (DD) Rupture Disc / HPX Double Disc Holder Assembly GEP-6074 Rev. J 102335 Ref. I.D.: 16590 WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS
More information334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm
High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More information708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
More informationRATIO CONTROLLER HD FIRE PROTECT PVT. LTD. TECHNICAL DATA INSTALLATION NOTE DESCRIPTION SPECIFICATION
RATIO CONTROLLER TECHNICAL DATA MODEL SIZE MAX. SERVICE PRESSURE FACTORY HYDRO TEST PRESSURE MOUNTING APPROVAL FINISH ORDERING INFORMATION DESCRIPTION Bronze Construction:- RCW-B, RCW-BM RCF-B, RCF-BM
More informationSCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
More informationSOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
More informationFULL COLOR TAB #7 MSE, MSR
FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output
More informationEnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationERNG-X. Description. Applications. ERNG-X Specifications DERNG2108X012
ERNG-X DERNG2108X012 Description The ERNG-X is a steady state no bleed engineered system for accurate and reliable control of Natural Gas. The ERNG-X includes a pressure regulator, preconditioning filters,
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2013 Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance
More informationSMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level Measurement Overview Echomax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More information2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
More information8000 Series Bellows Stem Seal
8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationPig Valves Complete Solutions for Industrial Valves. jagflo.com
Pig Valves Complete Solutions for Industrial Valves Cat.no.:E-PV-00 Introduction ~ Quality Commitment How to Order Product Introduction Material Specifications Working Sequences Design Feature Dimensions
More informationCast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
More informationInline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120
Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00
More informationP143 Pressure Regulator
P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationa World of Connection PLASSIM FITTINGS
PLASSIM FITTINGS C A T A L O G U E Water Distribution 2 Irrigation 12 Telecom 22 Box sizes 27 x 18 x 24 cm A-2 x 28 x 24 cm A-3 48 x 33 x 24 cm A-4 51 x 41 x 41 cm A-5 48 x 33 x 27 cm A-6 51 x 41 x 41
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationSampling Solutions 1
Sampling Solutions 1 Sampling solutions Series 27f side-mounted with Series 26k Series 27a/27c Series 27f/27p horizontal Series 27d/27e Series 27f vertical Bottle holder Series 27d/27e with adapter Series
More information3-PORT SEAT VALVES PN16 WITH EXTERNALLY THREADED CONNECTIONS STAZ-16, STBZ-16, STCZ-53 DATASHEET
-PORT SEAT VALVES PN WITH EXTERNALLY THREADED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In small or medium-sized heating, ventilating and air conditioning plants as a control or safety shutoff valve. For
More informationSubsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
More informationOPTIFLUX 6000 Handbook
OPTIFLUX 6000 Handbook Electromagnetic flow sensor for hygienic and sanitary applications The documentation is only complete when used in combination with the relevant documentation for the signal converter.
More informationSensor Mounting Shells and Adaptors
Effective: June 2001 (replaces May, 1994) EX-1690 Sensor Mounting Shells and Adaptors Part Numbers and Applications Guide to Tank Mounting Shells and Retrofit Adaptor Inserts for use with King-Gage AcraSensor,
More informationWAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
More informationNDP-50 Series Specifications
NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped
More informationModel 243 Service Regulators. R-1306 Rev. 10
Model 4 Service Regulators R06 Rev. 4 Service Regulators These large capacity service regulators are designed and built for commercial, industrial and gas distribution work. They are right at home in such
More informationPreparation and Installation of the RCS Rupture Disc Assembly
GEP-6048 Rev. Y 102335 Ref. I.D.: 6691 Preparation and Installation of the RCS Rupture Disc Assembly WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING DISC. THESE
More informationUnitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
More informationINDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More informationLevel Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
More informationKIT CR-4 NOTES: 1/2" TUBING BARBS (DEFAULT CONNECTION) MADE IN THE U.S.A. U.S. PATENT No. 5,863,128 1/2" MNPT (ALTERNATE CONNECTION)
NOTES: 1. MADE IN THE U.S.A. 1/2" TUBING BARBS (DEFAULT CONNECTION) 2. 3. U.S. PATENT No. 5,863,128 U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 1/2" MNPT (ALTERNATE CONNECTION) 4. MATERIAL:
More informationM3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
More informationSHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
More information