Technical Specifications EN80/81/40 Encoder - RD60 IRD

Transcription

1 Technical Specifications EN80/81/40 - Multi CODEC MPEG 2 and H.264 (AVC) 422 HD/SD (EN80/81) and SD () Contribution and Digital Satellite News Gathering (DSNG) s and with optional DVBS/S2 Modulator (L-Band or IF models) =Standard NO=Not Supported or Optional SOPT=Software Optional HOPT=Hardware and Software Optional (Hardware upgrade HOPT requires factory installation and many SOPT s require a HOPT) Details Video Video Input (Digital SDI) 3G BNC x1 ASI Iput Note 1. SD-SDI (SMPTE 259M Mbit/s) with embedded audio per SMPTE 272M HD-SDI (SMPTE 272M Gbit/s) with embedded audio per SMPTE 299M 3G-SDI (SMPTE 424M Gbit/s) with embedded audio per SMPTE 299M Auto detect SD, HD or 3G, or manual configuration. 75 Ohm HOPT Note 2 Video Output (Digital SDI) 3G BNC x 4 Bank A BNC x 2 Bank B BNC x 2 Note 1: If configured with the optional Modulator, the EN80/81/40 can take an ASI input on HDSDI video input to use the encoder as a stand alone modulator. Note 2: The video/audio IO sled on the is identical to the EN80, therefore it is 3G SDI and HD SDI capable. Only the video encoder module is limited to standard definition resolutions. It is factory or authorized repair center upgradable from SD to HD. The uses a different video sled supporting 8 pairs or 16 of MPEG 1 Layer 2 audio encoding, it does NOT support Dolby AC3 encoding. Video Input (Analog) BNC x1 Analog NTSC or PAL (SMPTE 170M, ITU-R 624-4). 75 Ohm Video Output (Analog) BNC x1 Downscaled HD to SD with analog waveform data. 1

2 Technical Specifications EN80/81/40 - Details Video Signal Generation SMPTE Bars with DVB Service Name and Service Provide OSD. Selectable resolutions from NTSC, PAL, 720P 59.94/50 and 1080i 59.94/50. User definable video fail mode. No video inputs are required to generate video signal. Same as encoder Video Output (HDMI 1.3) NA NA NA Digital SD/HD output. Concurrent with SDI Bank A SD encode Standard Definition D1 NTSC fps and PAL 25 fps video SD decode SD Video encode profile and levels (See 420/422 keys) MPEG 2: MP@ML, 422P@ML. Data rates from 1 to 50 Mbs H.264 (MPEG 4): MP@L3.0, MP@L3.1, MP@L3.2. Data rates from Mbs (Support for 420 and 422 for both CODECs based on 420/422 Feature Key) SOPT SOPT SOPT SD decode SOPT HD encode 1080i 59.94, 720P 59.94, 1080i 50, 720P 50 fps video HOPT HD decode SD/HD Video encode profile and levels (See 420/422 Keys) Group Of Pictures (GOP) MPEG 2: MP@ML, 422P@ML, MP@HL, 422P@HL. Data rates from 1 to 80 Mbs H.264 (MPEG 4): MP@L3.0, MP@L3.1, MP@L3.2, HP@l4.0, HP@L4.1. Data rates from Mbs (Support for 420 and 422 for both CODECs based on 420/422Feature Key) MPEG 2: I, IP, IBP, IBBP. H.264 MPEG 4: I, IP, IBP, IBBP SOPT SOPT HOPT SOPT SOPT MPEG 2 420/422 Key Feature key for MPEG and 422 Chroma encode SOPT SOPT SOPT decode SOPT Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2010 Adtec Digital. EN80,,, mediahub-hd422, mediahub-hdpro are trademarks of Adtec Digital. Other product and company names may be trademarks or registered trademarks of their respective companies. This information may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Adtec Digital. *(8 bit chroma) 2

3 Technical Specifications EN80/81/40 - Details H Key H Key Feature key for H Chroma encode SOPT SOPT SOPT decode SOPT Feature key for H * Chroma encode SOPT SOPT SOPT decode SOPT SD encode Pre Processing Filters (SD Only) : Temporal & Spatial (Median) with Time Base Corrector (TBC) on Analog and SDI inputs for SD resolutions only with Chroma filtering for NTSC/PAL NA NA HD encode Pre Processing Motion Compensated Temporal filtering HOPT Note 1 NA NA Interlaced encoding Motion Estimation and Precision MPEG 2: Field/Frame. H.264 MPEG 4: Field / Frame / Frame with MBAFF / Frame without MBAFF / PAFFH.264 Search Range: Horizontal to : Vertical to Pixels Precision MPEG 2: 1/2 Pixel : H.264 MPEG 4: 1/2, 1/4 Pixel Block Size MPEG 2: 16 x 16, 16 x 8 MC: H.264 MPEG 4: 16 X 16, 16 X 8, 8 X 16, 8 X 8 decode decode Video Latency (Encode path only and subject to change) Long (~ 1 second) Distribution Applications, Normal (~ 400 ms) Contribution Applications, Low (~ 250 ms) Low Latency Contribution, Very Low (~ 120 ms) Lowest Latency Applications decode latency is 4 frames Max Ancillary and Waveform Data 3

4 Technical Specifications EN80/81/40 - Details (V/H) ANC and WSS Video User Data Waveform (Composite or SD SDI) : Closed Captions per CEA-608-C (2005), Closed Captions per DVS-157, Wide Screen Signaling (WSS) per ETSI EN V1.4.1 ( ), Teletext per ETSI EN V1.3.1 ( ), AMOL. (V/H) ANC per SMPTE 291M (Native via SD/HD SDI) : Closed Captions per CEA-708 (SMPTE 291M), Teletext per OP47 and SMPTE 2031, VITC per SMPTE 2038, EBU Teletext/ Subtitles, WSS/Teletext/NABTS/CEA-608/TV2GX/ AMOL48/96, User Defined ( ) per SMPTE 2031, AFD/Bar Data/Pan Scan per CEA-CEB16 (2006) per SMPTE 2016 Q Waveform Bridging and Conversion of Video User Data CEA 608 to CEA 708 up-conversion, Caption Bridging - CEA 608 via Composite merged with SD or HD Video via SDI (Similar frame rates required), Teletext Bridging - Waveform Teletext via Composite merged with SD or HD Video via SDI, WSS Bridging - Waveform WSS via Composite merged with SD Video via SDI CEA 708 to CEA 608 on Analog video output Q Transport Stream User Data Carriage SCTE , ETSI EN , v1.2.1 ( ) Q Audio Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2010 Adtec Digital. EN80,,, mediahub-hd422, mediahub-hdpro are trademarks of Adtec Digital. Other product and company names may be trademarks or registered trademarks of their respective companies. This information may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Adtec Digital. *(8 bit chroma) 4

5 Technical Specifications EN80/81/40 - Details Audio Input (Digital) BNC- AES3 x4 BNC-SDI x1 AES-3 (x4). Digital audio uncompressed LPCM on inputs1/2/3/4 or compressed bit stream on inputs 1/2. 75 Ohm SDI (x8 EN80 x16 ). Digital audio embedded per SMPTE 272M (SD) and 299M (HD). Four (4) uncompressed LPCM services user selectable from groups 1/2/3/4 or two (2) compressed bit streams selectable from groups 1/2/3/4. Eight (8) uncompressed LPCM services user selectable from groups 1/2/3/4 or two (2) compressed bit streams selectable from groups 1/2/3/4. 75 Ohm. 4 Pairs or 8 8 Pairs or 16 decode for MPEG 1 Layer 2 with phase alignment 8 Pairs or 16 channel Audio Input (Analog) DB-15 M Analog Balanced Stereo (x2). Analog audio input via DB15 male connector (XLR) breakout cable included. Clip 18 db, 10K Ohm output via two DB9 Male connector MPEG 1 Layer 2 Audio encode 32/44.1/48 Khz. Bit rates include 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384 Kbit/s. Stereo, Mono, Dual Mono. Phase aligned support included. 4 Pairs or 8 8 Pairs or 16 decode 8 pairs or 16 channel Dolby AC 3 Audio encode Audio Passthrough 32/44.1/48 Khz. Bit rates include 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, 448, 512, 576, 640 Kbit/s. Modes 2.0 Stereo and 1.0 Mono. Two (x2) Dolby E 5.1/2.0/1.0, LPCM, Linear Acoustic Stream Stacker. NO decode Q passthrough Audio Signal Generation Audio Tones user selectable frequency per pair (4 on EN80 and 8 on ) from 440 hz to 2.5Khz. Group L/R mute or Pair L/R mute. No audio inputs are required to generate audio tones. On pairs 5/6/7/8 are all the same frequency. 4 Pairs or 8 8 Pairs or 16 same as Transport 5

6 Technical Specifications EN80/81/40 - Details Transport In ASI BNC x3 ISO MPEG 2 Transport Stream per EN :1997 (188 byte only). Physical interface 100 Mbit/s. ASI concurrent with TSoIP (GIGe) and DVBS/S2. Transport Out ASI BNC x3 Transport Over IP (TSoIP) RJ45 x1 ISO MPEG 2 Transport Stream per EN :1997 (188 byte only). Four (4) unique UDP or RTP encapsulated routes with SMPTE 2022 (COP3 FEC). TSoIP (GIGe) concurrent with ASI and DVBS/S2. One unique active IP input selectable. SPTS or MPTS Transport - DVBS/S2 BNC x2 IF F-Type x2 L- Band ISO MPEG 2 Transport Stream per EN :1997 (188 byte only). DVBS/S2 RF Modulation option. Intermediate Frequency (IF) between Mhz or L-Band between Mhz (2150 Option). RF or IF based on model Main and Monitor outputs with user selectable power level. DVB-S2 compliant per EN , DVB-S compliant per EN , DVB-DSNG compliant per EN HOPT HOPT HOPT L-band premium model HOPT DVBS2-8PSK 8PSK Satellite Modulation software key, requires factory installed DVBS/S2 hardware SOPT SOPT SOPT demodulation with standard or premium model SOPT DVBS2-16AP SK 16 APSK Satellite Modulation software key, requires factory installed DVBS/S2 hardware SOPT SOPT SOPT demodulation with premium model SOPT DVBS2-32AP SK 32 APSK Satellite Modulation software key, requires factory installed DVBS/S2 hardware SOPT SOPT SOPT demodulation with premium model SOPT Encryption DVB Common Scrambling Algorithm Basic Interoperable Scrambling System (BISS). Mode 0 Clear (Free To AirFTA), Mode 1 and Mode E. Decryption Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2010 Adtec Digital. EN80,,, mediahub-hd422, mediahub-hdpro are trademarks of Adtec Digital. Other product and company names may be trademarks or registered trademarks of their respective companies. This information may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Adtec Digital. *(8 bit chroma) 6

7 Technical Specifications EN80/81/40 - Details Table Generation MPEG Program Specific Information (PSI) table compliance: PAT /!CAT / PMT - SCTE 35 Ad Insertion Cue DVB Service Information (SI) static table compliance (Dynamic Option) MPEG (PSI) and DVB (SI) table compliance SDT / NIT /!EIT /!TDT/TOT ATSC A65B (PSIP) static table compliance (Dynamic Option) MGT (TVCT) - Terrestrial or (CVCT) - Cable, STT, RRT, EIT 0-3 System and Host Alarms Front Panel LED, Web UI, SNMP, GPIO Command and Control IPv4 via ETH0 Fast Ethernet! SNMP/FTP/SSH/Telnet/HTTP/TSoIP IPv4 via ETH1 GIGE! SNMP/FTP/SSH/Telnet/HTTP/TSoIP Terminal RS232 via RJ45! Terminal, N (Full API and Linux Terminal support) RS422 via DB9 Female! Sony 9 PIN Protocol, O! Slave, controlled by editor! Master, controls deck Parallel (GPIO via DB9 Male)! Encode, Stop, Status, BCD IO for user defined Tally or control! (Full Adtec API Par Port mapping via DVC command file) 7

8 Technical Specifications EN80/81/40 - Details Physical 1 RU chassis (19 x 18 x 1.75 / 482 x 44 x 457 mm ) - 9 pounds Power Inputs Redundant auto switching dual VAC (Standard) Redundant auto switching dual -48 VDC Telco (Option) Redundant auto switching 12 VDC Mobile (Option) Power Usage Start-up:72 Watts - Operational: 60 Watts Operational Operating less than 110 F (38 C) - Non Condensing Safety CE Specifications Disclaimer: Specifications subject to change without written notice. Copyright 2010 Adtec Digital. EN80,,, mediahub-hd422, mediahub-hdpro are trademarks of Adtec Digital. Other product and company names may be trademarks or registered trademarks of their respective companies. This information may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Adtec Digital. *(8 bit chroma) 8