Baby WIFI CLOCK Camera

Transcription

1 Руководство пользователя DE-WECM-CL1000A User Manual EN Baby WIFI CLOCK Camera User Manual Страница 1 из 24

2 Contents Overview 1 Clock Operation. 2 APP operation.6 Connecting to Internet.. 8 Viewing Live Video. 10 Time Stamp.12 Recording to Memory Card. 13 Viewing Photos and Videos. 14 Alarm Recordings 15 FTP uploads and alerts.. 16 Playback on PC and Wed UI.. 18 IPMultiView Clien..20 Страница 2 из 24

3 Overview Страница 3 из 24

4 Clock Operation Open the plastic cover on the back of the camera. Insert Micro SD Memory card (Up to 64GB) into the SD Memory Card Slot and switch on the power and then connect the adapter to wall socket with camera. Note: built-in battery: 1200mhA, power supply for camera only. AA alkaline battery:3 AA battery, power supply for clock only. AC/DC adapter: input AC 110V~240V, output DC 5.0V/2.0A. power supply for clock and camera. Setting the time: Press the SET for three seconds to enter time setup. The YEAR will begin go blink. Press the UP/DOWEN to enter current year. Press the SET again and UP/DOWEN to enter current MONTH. Press the SET again and UP/DOWEN to enter the current DATE. Press the SET again and UP/DOWEN to enter the current HOUR. Страница 4 из 24

5 Press the SET again and UP/DOWEN to enter the current MINUTE Press SET again and press UP/DOWEN to change 24-hour clock between 12-hour clock. Press SET to return to normal clock mode. Setting Alarms On the normal clock mode, press DOWN to set the alarm clock the clock displaying --:A1 that means alarm 1 is off. Press UP to turn on the alarm 1 and press SET and UP/DOWN to enter hour. Press the SET again to move over to the minute and press UP/DOWN to enter minute. Press SET to set the alarm 2. Follow the same as preceding method to enter alarm time press SET to set the alarm 3. Follow the same as preceding method to enter alarm time. Setting voice control and display In default situation, the voice control on. The display will off Страница 5 из 24

6 after time, date and temperature was displayed circularly which about 15 second. When the voice up to 60dB the display go back on. Press V/S to turn off voice and the display show --:SD which the display will keep showing time, date and temperature circularly. Press the V/S again to turn on voice control and the display show ON:SD Hold V/S for 5 seconds to keep showing time solidly. Hold V/S for 5 seconds again to come back circulating Setting temperature unite On the normal clock mode, press UP to change temperature unite between Celsius and Fahrenheit. Setting brightness On the normal clock mode, press UP unstill showing 8:01 then press UP/DOWN to adjust brightness. RESET Страница 6 из 24

7 The clock camera have two reset bottom. The clock rest on the back of the clock and The camera reset bottom in the battery slot. If your clock is unresponsive, press the clock reset bottom with a needle to reboot clock. If your camera is unresponsive or no WIFI signal, press the camera reset bottom for 20 seconds to reset camera to default setting and the camera indicator will flash to indicate a successfully reboot. Страница 7 из 24

8 APP Operation Download APP DOWNLOAD THE APP P2PLiveCam from Google Play or APP Store. You can also scan below QRcode to download the app directly. CONNECT DIRECTLY TO THE CAMERA S WIFI If the camera has not been setup yet, the blue light will blink slowly to indicate that it is transmitting a local WIFI signal. Use your mobile phone to search for WIFI network. The WIFI name start with the letter CM. Connect to this network. (See below for example) Страница 8 из 24

9 Once connected to the network open P2PLiveCam. From the main live video screen press the ADD(+) button in the top right corner. Form the ADD Device screen tap ADD NEW ONLINE CAMERA to add camera. Form the ADD NEW ONLINE CAMERA screen tap QR SCAN to use your phone s camera to scan the sticker on the back of the camera or manually enter the UID. You can also tap SEARCH LAN to see your camera. This will also Страница 9 из 24

10 show you the IP Address of your camera. The camera can be named anything and the default password is 8888 Press OK to add camera and return to the main live view screen Connecting to Internet Once the camera is added the settings can be accessed by Страница 10 из 24

11 pressing the gear to the right of the camera. Form the pop up menu press Device Settings. Form the Advance Settings screen press WiFi Config. On this screen select the WIFI network with sent by your home router and connect. Страница 11 из 24

12 There will be a pop up prompt to input the password to connect to the WIFI network. It will ask you want to connect to this network and when ok is pressed the camera will reboot. The light on the camera will blink for 30 seconds and then turn solid once the clock connects to the WIFI network. You can now reconnect your phone or tablet to your home network WIFI. Страница 12 из 24

13 Viewing live video From the live video tab of the app, the cam will show up at the top and it will say online when it is functioning and connected correctly. Tap on the camera to bring up the live view. Brightness, Contrast and Sound Brightness. Contrast Set video resolution you want to display Turn Audio on or off. Note: by default the Mic is off. Страница 13 из 24

14 Snapshot - Save a current screenshot to the phone record video Save a video to the phone Setting Time Stamp To set time choose the Time settings menu from the Device Settings screen. This screen will allow you to set and sync the timestamp for the video so it is correct. Recording to Memory Enter the advanced config menu by tapping on the gear on the right side of the cam and selecting Advanced Config. Then Страница 14 из 24

15 selecting SD Card record config. On this screen: Record settings Video Resolution File length Sound on and off Loop Recording on and off Format (completely erase) the memory card Страница 15 из 24

16 Photos And Videos comeback view Edit- allows for easy deletion of videos Phone view videos saved to the phone SD card View videos saved to the clock s SD card Downloads View progress of files downloading from SD card to phone Completed downloads View files that have been downloaded to the phone Select active cameras Choose which camera to view files form if there are more than one Страница 16 из 24

17 Alarm Recordings To activate motion detection based recording enter the alarm config menu form the Device Settings menu. From hare turn on the motion detection and set a sensitivity for alarm. When the camera detects motion it will snap a photo and send an alert to the phone. To set the camera to record with motion capture you must enable alarm based recoding in the SDCARD Record config. Страница 17 из 24

18 In the Device Settings menu enter the SDCard Record config menu. Form here set the record function to on-alarm. Other settings can also be changed on this screen such as file length for video recordings, sound recording on or off, and loop recording which will record over the old files when the memory card is full. alerts/ftp uploads Configuring FTP uploads and alerts can both be done from the Device Settings menu. Contact your local network administrator or IT technician for Страница 18 из 24

19 help configure the settings. (See below for example) Playback on PC and Videos can be reviewed and copied to a hard drive for backup by connecting the camera to a computer by removing micro SD card from the camera and inserting into a computer. It will come up as a removable drive and all the files can be accessed by opening the folder. For playback we currently recommend a free grogram called Potplayer, fond at theps:\\potplayer.daum.net Страница 19 из 24

20 Eyerayo is NOT AFFILIATED with potplayer.daum.net Playback on PC and web The WIFI clock camera can be accessed from a computer by suing the IPCAMERA application that can be found on the include CD. Open the program and click on the ip camera that comes up. A prompt will came up asking for user name and password. The default user name is admin and the default password is left blank. Страница 20 из 24

21 Form the web UI Click Browser pug-ins and install the pug-ins. This bill bring up the web UI.From here settings can be change and a live view of the camera will be viewable. Страница 21 из 24

22 IPMultiView Clien The WIFI clock camera also can be remote view from a computer by IPMultiView application that can be found on the include CD. Install IPmultiView on your computer. Open the program and enter name and password. The default user name is admin and the default password is left blank. Form the main UI clicl SETTING to add camera. Страница 22 из 24

23 Click ADD then enter the P2P UID and password. The UID can be found the sticker on the back of the camera and the password default is Страница 23 из 24

24 Live View Страница 24 из 24