RNEK-MN31B User Manual

Transcription

1 Inside your life! RNEK-MN31B User Manual Ver.1.0 HD/VGA 2Ch. Dashcam.

2 Record of Revision Revision Date Description of Changes Drafter 1.0 Aug.09, 2016 Initial release HD Yang 1

3 I. Product Summary 1. Specification 2. Name of parts 2

4 Chapter Ⅰ Product Summary 1. Specification Specifications Resolution/Frames Front and Rear (2CH) Front : 1280 X 720 (max 20 frames) Rear : 640 X 480 (max 15 frames) Camera Image sensor Front : 1/4 1.3MP CMOS (Himax) Rear : 1/3 0.35MP CMOS (Clairpixel) Angle of view Front : Diagonal 129 / Rear : Diagonal 120 Display Record LCD Status LED Video/Audio codec Normal mode Event mode Parking event mode Continuous recording method Voice recording Storage device 3.5 TFT LCD with TSP (480 x 320), Fast touch response Power/Record(Red/Blue), Security(White) Video : H264 / Audio : PCM 1 minute unit recording while driving Records 10 seconds before / 20 seconds after Records 10 seconds before / 20 seconds after First In First Out mode (When the storage for each mode is full, it erases the oldest pictures) Voice recording supported (On/Off available) 16GB Micro SD card (Max 32GB) Operating voltage DC +12 ~ +24V Operation temperature -20 ~ +70 Others Standby Current Shock Sensor GPS Max. 100uA 3 axis G-sensor External GPS (Option) Speaker Internal (8 ohm, 1W) Size/Weight 100 X 61 X 21(mm)/120g (the main body except the mount) Battery, LCD management 3 / 23 Prevent Battery discharge, protect LCD from high temperature 3

5 Chapter Ⅰ Product Summary 2. Name of parts 4 / 23 4

6 Chapter Ⅰ Product Summary Basic function Operating mode Condition Voice guide Contents Constant mode Constant We re starting to record. Records while driving in 1 minute interval Event Buzzer (Beep beep) Manual recording Button (Menu) Buzzer (Beep beep) Parking recording Event (Impact) Motion Event (Motion detection) Operating status (LED, security) Buzzer (Beep beep) Buzzer (Beep beep) Records 10 seconds before & 20 seconds after impact (Records for 30 seconds total) Records 10 seconds before & 20 seconds after pushing button (Records for 30 seconds total) Records 10 seconds before & 20 seconds after impact (Records for 30 seconds total) Records 10 seconds before & 20 seconds after motion detection (Records for 30 seconds total) Menu LED setting On Off Status Status LED Front LED Boot Red ON Off Firmware Update Red/blue ON in turn (Write: Red ON/Blue OFF Scan: Red OFF/Blue ON) Format Red, 0.25 sec(on) / 0.25 sec(off) Off Constant recording During event / impact 1CH: Red, 0.5 sec(on) / 2.5 sec(off) 2CH: Blue, 0.5 sec(on) / 2.5 sec(off) 1CH: Red, 0.5 sec(on) / 0.5 sec(off) 2CH: Blue, 0.5 sec(on) / 0.5 sec(off) 5 / 23 2 sec off/2 sec on 2 sec periodic flicker Driving mode: 0.5 sec periodic flicker Parking mode: 3 sec periodic flicker Parking recording standby Red(1 sec) / Blue(1 sec) flicker 4 sec periodic flicker No SD card Off Off High temperature cutoff (From LCD turn-off) Red, 0.25 sec(on) / 2.5 sec(off) Off 5

7 Main menu screen 1) After completion of bootup, screen will display Preview Menu and operating status. 2) Operating status display screen icons (Bottom screen) Icon Comment Note Year, month, day, hour, minute, second - Recording channel - Constant recording Impact recording, manual recording, motion recording parking standby Current recording status Impact sensor - Sound recording status: ON, OFF - GPS signal status: ON, OFF - 6 / 23 6

8 3) Screen contents 4) Icons When you touch each icon on the main menu display, following function or setting screen will be displayed in correspondence. Icon Comment It quickly sets sound recording, screen saver, parking mode, and LCD turnoff. During rear camera connection, it adjusts screen split size. This icon selects to play file and set configuration. Use this icon when there s urgent need to record manually. Once recording is started, OSD will display manual recording has started. You cannot use manual recording during event recording, and OSD will display cannot manually record during event recording. 7 / 23 7

9 5) Quick Setting Touch quick setting icon to view quick setting screen. 6) Quick setting function Item Set-up function Comment Sound recording On / Off Sets sound recording. When set to off, device will not record sound. Default value On Screen saver On / Off Sets to use screen saver or not. On Parking mode Off / Motion + Impact / Impact Selects automatic parking and recording format during parking mode. When set to off, device continues with driving mode recording without switching to parking mode, Motion + Impact LCD screen On / Off Sets LCD screen output. On QUICK SET 8 / 23 8

10 7) Change Channel When Change Channel icon is touched, screen will be displayed in PIP mode so that rear image can be viewed at the same time. How to change channel Touch Change Channel icon to switch screen. Front (full screen)+rear(upper right 1/4) Front (1/2)+Rear (1/2) Front (full screen) Rear (full screen) 9 / 23 9

11 8) Manual Recording Choose Manual Recording and the device will record in the same manner as event occurrence. Bottom status bar will flicker EVT icon and make beep beep sound. When motion event or impact event is in operation, manual recording function will be available. 10 / 23 10

12 Record Setting Name Set value Contents Default value Recording resolution Low/Medium/High High Driving impact sensitivity Off, Stage 1(dull) ~Stage 10(sensitive) It controls the sensitivity of impact sensor which starts event recording during driving. Stage 4(Normal) Parking impact sensitivity Off, Stage 1(dull) ~Stage 10(sensitive) It controls the sensitivity of impact sensor which starts event recording during driving. Stage 10(Sensitive) Motion sensitivity Dull, Normal, Sensitive Normal Parking mode Off/Motion+Impact/Impact Off: Proceeds with driving recording without switching to automatic parking mode. Motion+Impact: It begins recording when there is motion or impact during parking. Impact: It only begins recording when there is impact during parking. Motion+Impact System Automatic Shutoff Automatic shut-off low temp correction 11.5/23.0, 11.8/23.6, 12.0/24.0, 12.2/24.4, 12.5/25.0 Selects automatic system shut-off battery voltage. 11.8/23.6 Off/On Sets battery discharge voltage correction at low temperature. Off Sound recording On/Off Selects to record sound. On 11 / 23 11

13 Sound Setting Item Setting Value Comment Default Value Speaker sound Stage 0(sound off)~ Stage 3(Large) Sets the volume of general sound, voice guide, and sound effect. Stage 2(Normal) Voice guide On / Off Turns on/off voice guide. On Display Setting Item Setting Value Comment Default Value LCD brightne ss Screen saver type Screen saver switch Stage 1(low)~ Stage 3(high)/autom atic Image/Clock/ LCD screen off Sets LCD brightness. Sets type of screen saver. Stage 2(Normal) LCD screen off 1 min/5 min/10 min Sets the time to switch to screen saver. 1 min Front LED OFF / ON / Flicker Selects motion setting o f front LED. Flicker Rear LED OFF / ON/ Flicker Selects motion setting o f rear LED. ON Adjust touch sequential touch of + icon When touch doesn t operate normally. 12 / 23 12

14 Time Setting Item Setting Value Comment Default Value GPS automatic time s etting Off/On When receiving signal from external GPS, it automatically sets date and time. On Manual time setting Sets time with arrow. Press Back and the set time will be applied. Time does not initialize System Information Item Setting Value Comment Default Value Privacy setting ON / OFF Selects to put in password or not to access format and play mode. Off Change password 4 digits between number 0~9 Sets password. In case you forget your password, format the device in PC viewer and password will be reset to System information - Displays system information / 23 13

15 Viewer Initial Setting Value 14 / 23 14