Bluetooth Transmitter

Transcription

1 User Manual Bluetooth Transmitter BTTC-318 Overview 1 LED indicator status 1 Pair and connect to Bluetooth headphones 2 Use with your TV 2 Check your TV output options before the set up 2 TV s with AUX 3.5mm audio out 3 TVs with RCA audio out(red/white ports labeled AUDIO OUT ) 3 TVs with OPTICAL audio out 4 Use with your AV Receiver with 6.35mm PHONE jack 5 Use with your PC/Laptop 5 Add a 2nd pair of Bluetooth headphone 6 Clear paired history 7 Troubleshooting 7

2 Overview LED indicator status Status LEDs indication Power On/Off BLUE LED on for 1 second Pairing RED and BLUE LED flashes alternately Connected Disconnected Using the aptx LL WHITE LED flashes TWICE per 5 seconds Using the aptx WHITE LED flashes ONCE per 5 seconds Using the FastStream BLUE LED flashes TWICE per 5 seconds Using the SBC BLUE LED flashes ONCE per 5 seconds BLUE LED flashes ONCE per 2 seconds 1

3 Pair and connect to Bluetooth headphones Powering up and turn on the Priva III: Connect it to a TV USB port (now ensure your TV is turned on) or any other USB charger that supports 5V/500mA -2A (e.g. your phone charger) using included Micro USB power cable. Slide on/off switch to ON position, BLUE LED will be on for 1 second. Enter the Priva III into PAIRING MODE: On first use, it will enter PAIRING MODE automatically, LED flashes RED and BLUE alternately. Alternatively, press and hold MFB button for 1 second to manually enter pairing mode. Enter headphone into PAIRING MODE: Please refer to relevant user manual (Usually LED on headphone flashes RED and BLUE alternately or flashes BLUE quickly). Connecting: During the pairing process, keep the devices close to each other and wait. Once connected, the LED on the Priva III will flash once or twice every 5 seconds. Use with your TV Check your TV output options before the set up AUX/3.5mm RCA jacks Other RCA labeled jacks (usually AUDIO OUT audio IN) Optical OUT Big Phone Jack PC USB Output Jack Options Natively Supported? 2

4 TV s with AUX 3.5mm audio out After pairing the Priva III to your Bluetooth headphones and connecting cables, you should be able to hear sound from your headphones; if not, ensure your TV speaker is set to Headset. TVs with RCA audio out (Red/White ports labeled AUDIO OUT ) After pairing the Priva III to your Bluetooth headphones and connecting cables, you should be able to hear sound from your headphones; if not, Ensure use TV Red/White ports labeled AUDIO OUT, other Red/White ports are incorrect. 3

5 Ensure your TV speaker is set to External Speaker. TVs with OPTICAL audio out After pairing the Priva III to your Bluetooth headphones and connecting cables, you should be able to hear sound from your headphones; if not, Ensure your TV speaker is set to External Speaker. Ensure TV audio format is set to PCM or Dolby/DTS is OFF(This is IMPORTANT) 4

6 Use with your AV Receiver with 6.35mm PHONE jack NOTES: Transmitter is NOT compatible with ANY RCA(L/R) ports on back of your AV Receiver, ONLY use the BIG 6.35MM PHONE OUT on front side of your AV Receiver with the 6.35mm to 3.5mm adapter. Do NOT set the volume too high. Plug wired ear buds to the port, check whether the sound is normal. Use with your PC/Laptop The Priva III supports Micro USB digital audio input from your PC/Laptop. This delivers much better audio quality compared to plugging it into the standard 3.5mm AUX analog port. Connect the Priva III to PC/laptop via the included Micro USB data/charging cable. NOTES: The connecting cable must have both DATA SYNC and charging capabilities. After pairing the Priva III to your Bluetooth headphones and connecting cables, you should be able to hear sound from your headphones; if not, Set as default "Playback device" on PC/laptop - Right-click the speaker icon in the bottom-right of the taskbar and select Playback devices. 5

7 Set the Avantree Priva III as the Default Device. For Skype audio settings, please select Avantree Priva III for both Speakers and Microphone. Add a 2nd pair of Bluetooth headphone Step 1: Pair and connect the Priva III to 1st Bluetooth headphone. Step 2: Enter the Priva III into PAIRING MODE manually Press and hold MFB for 1 second until the LED flashes RED and BLUE alternately. Step 3: Place your 2nd set of headphone into Bluetooth PAIRING MODE (please refer to your 2nd headphones user manual, usually LED on headphone flashes RED and BLUE alternately or flashes BLUE quickly). Step 4: Keep the devices close and wait until the LEDs on both devices slow down. Now, both headphones are connected to the Priva III. 6

8 Clear paired history If you are experiencing unexpected issues such as short work range, audio cuts,not pairing, etc. You may need to clear the paired history of Priva III. Step 1: Enter Priva III into pairing mode - press and hold MFB for 1 second until LED flashes RED and BLUE alternately. Step 2: Press and hold MFB button for 5 seconds, BLUE LED is on for 2 seconds, now paired history of Priva III is all cleared. Then Priva III will enter pairing mode automatically. Troubleshooting 7