Getting Started. Getting Started Package Contents Parts & Functions USIM Card Memory Card Battery...

Size: px

Start display at page:

Download "Getting Started. Getting Started Package Contents Parts & Functions USIM Card Memory Card Battery..."

Avis Bishop
5 years ago
Views:

1 Pakage Contents Parts & Funtions USIM Card Memory Card Battery... -8

2 Pakage Contents The following items are inluded in the pakage. Please onfirm pakage ontents before use. Contat SoftBank Customer Support (P.7-3) for missing items. 006Z Battery Quik Start Guide (Japanese) Warranty (unit, AC Adapter) AC Adapter Miro USB Cable (USB Charger) This Wi-Fi router aepts mirosd /mirosdhc Card (sold separately). Purhase one to use Memory Card funtions. Keep Warranty in a safe plae. WLAN Initialization Stiker -2

3 Parts & Funtions Part Names & Funtions a b d e f Display a b e f g a Display Wi-Fi router status appears. See "Display" (P.-3). b External Devie Port Connet Miro USB Cable here. WPS Key Long Press to enable/disable Wi-Fi. When Wi-Fi is disabled, press any key to enable Wi-Fi. With WLAN on, press and hold for WPS (Wi-Fi Proteted Setup); adjust settings for WPS ompatible Wi-Fi devies. See "Conneting WPS Supported Wi-Fi Devies" (P.2-8). Seurity set to WEP by default; use SoftBank 006Z Utility to set WPS. See "Ativating SoftBank 006Z Utility" (P.5-2). d CONNECT Key Long Press to toggle onnet/disonnet. Press and hold to toggle Always On/Manual. Setting appears on Display. e Power Key Toggle power on/off. Power on to enable WLAN; onnets to Internet automatially. f Battery Cover d a Connetion Status 3G: Conneted Network b Signal Strength : Strong Weak Status Notifiations Battery harging or WPS onnetion status. See "Status Notifiations" (P.-4) d Internet Connetivity Default : Press and hold CONNECT Key to toggle setting: : Always On : Manual e Roaming Status Appears when roaming. Paket Communiations harges may be high when roaming. f Conneted Wi-Fi devies : No Wi-Fi devies onneted : Wi-Fi disabled h -3

4 g Battery Strength : Full Empty Blinking: Battery exhausted : Charging h Internet Connetivity Conneted Disonneted If Wi-Fi router is not used for a while, Display turns off automatially. Press any key to illuminate Display. Leaving Wi-Fi router idle (no transmissions/battery fully harged) ativates Sleep mode and ends Internet onnetion. Press any key to anel Sleep mode and re-establish a onnetion. Status Notifiations These notifiations may appear on Wi-Fi router: 表示 Display WPS Proessing WPS Sueed WPS Failed Conneting No Servie Insert USIM Invalid USIM Enter PIN Enter PUK SIM Lok LOW Battery DATA MAIN DATA SUB Charging (Power Off) 状態 Status Configuring WPS onnetion WPS onnetion established WPS onnetion failed Attempting to establish Internet onnetion Wi-Fi router is outside servie area USIM Card is not installed Invalid USIM is installed PIN entry required in SoftBank 006Z Utility PUK entry required in SoftBank 006Z Utility USIM Card is loked Charge battery now Wi-Fi router is in Unlimited Data Disount Area Wi-Fi router is in Unlimited Data Disount Sub Area -4

5 USIM Card USIM Card is the property of SoftBank Mobile. The IC hip ontains ustomer information inluding phone number. USIM Card must be installed for use. See USIM Card user guide (Japanese). USIM Card Installation Power off 2 If Miro USB Cable is onneted, remove it 7 With label up, 4 slide forward, 5 press down to insert d e 8 Replae Cover 3 Remove Cover 4 Lift battery 2b (Use Noth a) and remove it 5 Insert USIM Card into USIM Card Slot with IC hip down a b IC hip 6 Confirm USIM Card installation -5

6 Removing USIM Card Power off 2 If Miro USB Cable is onneted, remove it 3 Remove Cover 4 Lift battery 2b (Use Noth a) and remove it 5 Slide USIM Card out and remove it from USIM Card Slot 6 With label up, 4 slide forward, 5 press down to insert d e 7 Replae Cover a b Avoid touhing the IC hip; may ause damage. Foribly inserting/removing USIM Card may damage it. Be areful not to lose removed USIM Card. Prevent hildren from aidentally swallowing USIM Card. If IC hip is dusty, lean with a soft loth. Memory Card Wi-Fi router aepts mirosd /mirosdhc up to 32GB. SoftBank does not guarantee ompatibility with all mirosd /mirosdhc ards. -6

7 Memory Card Installation Power off 2 If Miro USB Cable is onneted, remove it 3 Remove Cover (see "USIM Card Installation" (P.-5) Step 3 ) 4 Remove battery (see "USIM Card Installation" (P.-5) Step 4 ) Removing Memory Card Power off 2 If Miro USB Cable is onneted, remove it 3 Remove Cover (see "Removing USIM Card" (P.-6) Step 3 ) 4 Remove battery (see "Removing USIM Card" (P.-6) Step 4 ) 5 Slide Cover down until it liks and lift it as shown 6 With ontats down, insert Memory Card 7 Slide Cover up until it liks 5 Slide Cover 6 Remove down until it Memory Card liks and lift it as shown 7 Slide Cover up until it liks 8 Replae battery (see "USIM Card Installation" (P.-5) Step 7 ) 9 Replae Cover (see "USIM Card Installation" (P.-5) Step 8 ) 8 Replae battery (see "Removing USIM Card" (P.-6) Step 6 ) 9 Replae Cover (see "Removing USIM Card" (P.-6) Step 7 ) Do not insert USIM Card or Memory Card with exessive fore. May ause damage. Do not misplae a removed Memory Card. -7

8 Battery Inserting Battery Insert battery before use. For battery installation steps, see "USIM Card" (P.-5). Charging Battery Battery is not harged fully out of the box. Charge battery fully before using Wi-Fi router. AC Adapter Insert Miro USB Cable miro plug into Wi-Fi router External Devie Port 2 Insert Miro USB Cable plug into AC Adapter 3 Plug AC Adapter prongs into AC 00 V outlet USB Charger Insert Miro USB Cable miro plug into Wi-Fi router External Devie Port 2 Insert Miro USB Cable plug into PC USB port Conneting Wi-Fi router to PC for the first time automatially ativates driver installer. See P.3-5 or P.3-6. USB harging may be unavailable depending on modem (battery) temperature. Battery Strength Battery Strength indiator appears at the top of Display. If battery beomes low, indiator flashes. See "Display" (P.-3) -8

9 Charging Preautions When harging battery, note the following: Battery must be installed to harge it. Always use speified AC Adapter or Miro USB Cable. Battery disharges even if Wi-Fi router is not in use. Charge after long periods of disuse. Approximate Charging Time/Operating Time Charging Time AC Adapter: 4 hours USB Charger: 5 hours Continuous Operating Time 2 Continuous Communiation Time 2 00 hours 4 hours Varies by ambient temperature, battery usage, et. 2 Varies by environment, signal onditions, et. Replae battery if operating time shortens notieably. -9

Package Contents 1-2 Part Names & Functions 1-3 Contents and Descriptions 1-3 Display 1-4 Status Notifications 1-4

1 Package Contents 1-2 Part Names & Functions 1-3 Contents and Descriptions 1-3 Display 1-4 Status Notifications 1-4 Bridge Mode 1-6 Overview 1-6 Operating Specifications 1-6 Bridge Mode Restrictions 1-6