CCT-1301 MK2 USER MANUAL

Transcription

1 denver-elect ronics. com CCT-1301 MK2 USER MANUAL ENG-1

2 1.Shutter Speaker 3.ON/OFF 4.USB port 5.Micro SD card slot 6.Lens 4 7.Charging indicator light 8.Busy indicator light 9.Cover Screen 11.Mode Menu 13.AV port Down (Zoom out) 15.Up (Zoom in) 16.Tripod slot For the power capacity in the battery, refer to the following icons: Full Middle Low 1.Connect device to car adaptor through Mini-USB port, device will power on automatically & enter standby mode and start charging with red indicator light ON. Once device has been fully charged, red indicator light goes out. 2. Connect device to PC via USB cable, device will power on automatically and start charging. Once device has been fully charged, red indicator light goes out. Installation and Removal of micro SD card 1. In the direction as indicated, insert the micro SD card into the slot until it is held firmly. 2. To take the micro SD card out, slightly press the micro SD card to eject it out. [Note]: 1. Observe the direction to insert the micro SD card; if the direction is wrong, the device and/or the micro SD card may be damaged. 2. When the micro SD card is inserted into the device, the machine will set the micro SD card as preset storage. 3. If the micro SD card is incompatible with the device, please insert the card again or replace it for retry. ENG-2

3 4. PLEASE USE 8GB-32GB/CLASS 10 (C10) MICRO SD CARDS ONLY. 5. Please insert the micro SD card ONLY when device is OFF. Operation Instructions Turn ON/OFF Device 1. Press the ON/OFF key for 1 second to switch ON and hold for 1 seconds to switch OFF device manually. 2. Connect the device with car charger in the car. When car engine starts up, device will be switched ON automatically. When car engine shuts off or car charger been disconnected, device switches OFF with 10 seconds delay. How to Enter System Setup In Video / Photo / Vehicle mode, continuous press the Menu key to select the System Setup, press the UP/Down - shutter key to setting: - Sound Effect: Shutter: [on]/[off] Start-up: [on]/[off] Beep: [on]/[off] - Frequency: [50HZ]/ [60HZ] - Auto Power Off:[OFF]/[1min]/[2min]/[3min] - Language: You may set the desired OSD language menu. [German]/[Danish]/[Spanish]/[French]/[Italian]/[Dutch]/[Polish]/[Portuguese]/[Swedish]/ [Finnish]/[English] - TV Mode: [NTSC] / [PAL] - Format: Format the memory card. [YES ]/[NO] - Default Setting:[YES ]/[NO] Take Video and Set Video Menu 1. Take video When its powered of enter the Vehicle mode as default; press the Mode key to enter the video mode with icon displaying at the upper-left corner of screen. Press the Shutter key to start video recording after proper Micro SD card been inserted. During recording, the red icon flashes. To stop, press and hold power 2 second. 2. Set Video Menu Press Menu to switch this options. - Video Resolution :[1280*720 HD]/[640*480 VGA] - Loop recording time: [3 Minutes]/[5 Minutes]/[10 Minutes]/[off]. To record, store and recycle the video file by 3/5/10 minutes per section. - Date: [on]/[off]/[set Date]. - Setup: Refer to setting the System Setup. ENG-3

4 Re c ording Movie Clips in a c a r 1. Ta ke Mo vie Clip s Pre ss the p o we r ke y to e nte r the Ve hic le mo d e a s d e fa ult with ic o n d isp la ying o n the uppe r-le ft c o rne r o f the sc re e n. Pre ss the Shutte r ke y to sta rt re c o rding mo vie c lips a fte r pro pe r Mic ro SD c a rd b e e n inse rte d. During re c o rding, the re d ic o n fla she s. [Note ]: - Whe n the d e vic e is mo unte d o n the wind shie ld with c a r c ha rg e r c o nne c te d, it will p o we r ON a nd sta rt re c o rding a uto ma tic a lly o nc e c a r e ng ine sta rts up. - During c ha rg ing with c a r c ha rg e r c o nne c te d, it suppo rts simulta ne o us re c o rding. 2. Se t Ve hic le me nu Pre ss the MENU b utto n to switc h b e twe e n a ll the me nus. - Vide o Re so lutio n: [1280*720 HD]/ [640*480 VG A]. - Lo o p re c o rding : [Off]/ [3minute s]/ [5minute s]/ [10minute s]. To re c o rd, sto re a nd re c yc le the vid e o file b y 3/ 5/ 10 minute s p e r se c tio n. - G Se nso r: Off/ lo w/ Mid d le / Hig h. Onc e G sensor turned ON to low/middle/high sensitivity and trig g e re d, p re ss 'MODE' b utto n while re c o rding,the ic o n turn re d a nd a p p e a ring o n LCD sc re e n,c urre nt vid e o file will b e lo c ke d a s imp o rta nt file. Suc h lo c ke d file s wo n t b e re c yc le d b y lo o p re c o rding func tio n. - Pa rking Mo nito r Mo de : [On]/ [Off]. - Ro ta te :[o n]/ [o ff] - Mo tio n d e te c tio n: [o n]/ [o ff]. Whe n c a r is p a rke d a nd mo tio n d e te c tio n turne d On, DVR will d e te c t mo ving o b je c ts in fro nt o f c a r a nd trig g e r re c o rd ing a uto ma tic a lly, o r sta y a t sta nd b y sta te if the re s no o b je c t mo ving. - Da te & Time : [o n]/ [o ff]/ [Se t Da te ]. - Se tup : Re fe r to se tting the Syste m Se tup. Ta ke Photo a nd Se t Photo Me nu 1. Ta ke Pho to s Pre ss the p o we r ke y to e nte r the Ve hic le mo d e a s d e fa ult; p re ss the Mo d e ke y to e nte r the Pho to mo d e with ic o n displa ying o n the uppe r-le ft c o rne r o f the sc re e n. The n, ho ld the de vic e firmly, the n p re ss Shutte r ke y to ta ke p ho to s. Pho to s will b e sto re d into me mo ry c a rd a uto ma tic a lly. 2. Se t Pho to Me nu During p ho to mo d e, p re ss MENU ke y to e nte r p ho to me nu se tting s. - Re so lutio n:[5m 2592*1944] / [3M 2048*1536] / [2M 1600*1200]/ [VG A 640*480]. - Ima g e Qua lity:[fine ]/ [No rma l] - Da te : [o n]/ [o ff]/ [Se t Da te ]. - Se tup : Re fe r to se tting the Syste m Se tup. ENG 4

5 Re c ording Movie Clips in a c a r 1. Ta ke Mo vie Clip s Pre ss the p o we r ke y to e nte r the Ve hic le mo d e a s d e fa ult with ic o n d isp la ying o n the uppe r-le ft c o rne r o f the sc re e n. Pre ss the Shutte r ke y to sta rt re c o rding mo vie c lips a fte r pro pe r Mic ro SD c a rd b e e n inse rte d. During re c o rding, the re d ic o n fla she s. [Note ]: - Whe n the d e vic e is mo unte d o n the wind shie ld with c a r c ha rg e r c o nne c te d, it will p o we r ON a nd sta rt re c o rding a uto ma tic a lly o nc e c a r e ng ine sta rts up. - During c ha rg ing with c a r c ha rg e r c o nne c te d, it suppo rts simulta ne o us re c o rding. 2. Se t Ve hic le me nu Pre ss the MENU b utto n to switc h b e twe e n a ll the me nus. - Vide o Re so lutio n: [1280*720 HD]/ [640*480 VG A]. - Lo o p re c o rding : [Off]/ [3minute s]/ [5minute s]/ [10minute s]. To re c o rd, sto re a nd re c yc le the vid e o file b y 3/ 5/ 10 minute s p e r se c tio n. - G Se nso r: Off/ lo w/ Mid d le / Hig h. Onc e G sensor turned ON to low/middle/high sensitivity and trig g e re d, p re ss 'MODE' b utto n while re c o rding,the ic o n turn re d a nd a p p e a ring o n LCD sc re e n,c urre nt vid e o file will b e lo c ke d a s imp o rta nt file. Suc h lo c ke d file s wo n t b e re c yc le d b y lo o p re c o rding func tio n. - Pa rking Mo nito r Mo de : [On]/ [Off]. - Ro ta te :[o n]/ [o ff] - Mo tio n d e te c tio n: [o n]/ [o ff]. Whe n c a r is p a rke d a nd mo tio n d e te c tio n turne d On, DVR will d e te c t mo ving o b je c ts in fro nt o f c a r a nd trig g e r re c o rd ing a uto ma tic a lly, o r sta y a t sta nd b y sta te if the re s no o b je c t mo ving. - Da te & Time : [o n]/ [o ff]/ [Se t Da te ]. - Se tup : Re fe r to se tting the Syste m Se tup. Ta ke Photo a nd Se t Photo Me nu 1. Ta ke Pho to s Pre ss the p o we r ke y to e nte r the Ve hic le mo d e a s d e fa ult; p re ss the Mo d e ke y to e nte r the Pho to mo d e with ic o n displa ying o n the uppe r-le ft c o rne r o f the sc re e n. The n, ho ld the de vic e firmly, the n p re ss Shutte r ke y to ta ke p ho to s. Pho to s will b e sto re d into me mo ry c a rd a uto ma tic a lly. 2. Se t Pho to Me nu During p ho to mo d e, p re ss MENU ke y to e nte r p ho to me nu se tting s. - Re so lutio n:[5m 2592*1944] / [3M 2048*1536] / [2M 1600*1200]/ [VG A 640*480]. - Ima g e Qua lity:[fine ]/ [No rma l] - Da te : [o n]/ [o ff]/ [Se t Da te ]. - Se tup : Re fe r to se tting the Syste m Se tup. ENG 4

6 Playback Mode 1. Browse files After the device powers ON and enters the Vehicle mode, press the mode key to enter the PLAYBACK mode, press the UP/DOWN key to browse the all files. In the playback mode, press the UP/DOWN key to choose the photo or video to be previewed; Press the SHUTTER key to play the video, Press the shutter key again to pause, press the UP key to stop replaying. 2. Delete In playback mode, press the Menu button to have the Delete/Protect options appearing. Choose Delete and its submenu Delete one or Delete all or Cancel file in the memory card. [Note]: The important files that have been locked by G-sensor or Emergent key can t be deleted. 3. Protect In playback mode, press the Menu button to have the Delete/Protect options appearing. Choose Protect and display Lock/Unlock One Video / Lock all / Unlock all. The locked file cannot be deleted (except formatting). [Note]: The G-Sensor locked file may be deleted via menu unlocking. Connection to PC via USB Cable 1. USB Backup Mode (SDHC) Connect the DVR and PC with the USB cable, then the device will automatically power on and the SDHC word display on the screen, then one mobile disc will appear on My Computer on the desktop and you may find the desired file in the Mobile Disc/DCIM folder. 2. PC-CAM 1. Press and hold the shutter key, connect the DVR and PC with the USB cable, when the device power on automatically, the PC-CAM display on the screen. At this time, you can enter the PC functions. 2. PC operation system: Windows 2000/XP/Vista/Windows 7 or above. 3. Choose PC-CAM, then the DVR may be used as a camera. 4. Remove the USB cable to turn off the DVR. Reset Improper operation or incorrect memory card can cause DVR to freeze. Please press the RESET hole on the bottom side of DVR to power OFF the DVR. Power ON DVR manually and DVR will automatically restore the factory default settings. Connecting the Camcorder to a TV 1. Connect the camcorder to a TV via the AV cable. ENG-5

7 2. Turn o n the TV a nd the c a mc o rd e r, a nd the n se t the TV to AV mo d e. 3. Whe n the c a mc o rd e r is se t to re c o rd mo d e, yo u c a n pre vie w the sub je c ts yo u wa nt to re c o rd o n the TV sc re e n. 4. Whe n the c a mc o rde r is se t to Pla yb a c k mo de, yo u c a n re vie w a ll the file s sto re d in the c a me ra o n the TV. Te c hnic a l Spe c ific ations Se nso r 1.3 Me g a Pixe ls CMOS LCD displa y 1.77" TFT Sc re e n Le ns F/ 2.8 f=5.3mm Shutte r Ele c tro nic Shutte r: 1/ 2 ~ 1/ 800 se c Dig ita l zo o m 4 Re so lutio n Ima g e :[5M 2592*1944] / [3M 2048*1536] / [2M 1600*1200]/ [VG A 640*480] Vide o : [1280*720 HD]/ [640*480 VG A]. Sto ra g e Exte rna l me mo ry: mic ro SD c a rd (no t inc lud e d ),up to 32G B Po we r so urc e Li-io n b a tte ry(b uilt in) Amb ie nt te mpe ra ture Ope ra ting : 0 C to 40 C Sto ra g e : -20 to 60 C Mic ro pho ne Built-in Spe a ke r Built-in Dime nsio n 71.8x46.6x26(mm) We ig ht Ab o ut 55 g Warning Lithium battery inside! Do not try to open the product! Do not expose to heat, water, moisture, direct sunlight! Only charge with the original adaptor supplied with this product! CAUTION! ENG 6

8 ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Imported by: DENVER ELECTRONICS A/S Stavneagervej 22 DK-8250 Egaa Denmark www. facebook. com/denverelectronics ENG-7