RHD2000 Recording System Catalog
|
|
|
- Lucinda Banks
- 6 years ago
- Views:
Transcription
1 RHD2000 Recording System Catalog 16 August 2017 The RHD2000 Recording System is a modular family of open-source hardware and software that allows users to record biopotential signals from up to 1024 low-noise amplifier channels using the revolutionary RHD2000 series of digital electrophysiology chips from Intan Technologies. For more information on the items listed in this catalog, visit For prices and order forms visit 1
2 RHD2000 Recording System A USB-linked recording controller connects to a host computer via a standard USB cable. Small amplifier boards connect to this controller via thin, flexible all-digital SPI interface cables. Amplifier boards are available with unipolar electrode inputs and a common reference input (commonly used in neural recording applications) or with bipolar electrode inputs (commonly used in surface EMG or ECG applications). Some boards contain 3-axis accelerometers that may be used to monitor motion or orientation. RHD channel amplifier board with 16 unipolar inputs (#C3334) RHD2132 amplifier board with 32 unipolar inputs (#C3314) RHD2000 USB interface board (#C3100) Supports up to four SPI interface cables and 256 channels total via USB 2.0 cable. RHD2216 amplifier board with 16 bipolar inputs (#C3313) RHD2164 amplifier board with 64 unipolar inputs (#C3315) 512ch Recording Controller (#C3004) Supports up to four SPI interface cables and 512 channels total via USB 3.0 cable. 1024ch Recording Controller (#C3008) Supports up to eight SPI interface cables and 1024 channels total via USB 3.0 cable. RHD ft (0.9 m) SPI interface cable (#C3203) RHD ft (1.8 m) SPI interface cable (#C3206) RHD ft (0.3 m) Ultra Thin SPI interface cable (#C3211) RHD ft (0.9 m) Ultra Thin SPI interface cable (#C3213) RHD ft (1.8 m) Ultra Thin SPI interface cable (#C3216) Multiple SPI cables may be daisy-chained to form longer cables up to 10 meters (33 feet) in length. Both standard (blue) and ultra thin (violet) SPI cables are shown here. For more information on these items, see the RHD2000 evaluation system datasheet at RHD2132 amplifier / accelerometer board with 32 unipolar inputs and 3-axis accelerometer (#C3324) RHD2216 amplifier / accelerometer board with 16 bipolar inputs and 3-axis accelerometer (#C3323) RHD2164 amplifier / accelerometer board with 64 unipolar inputs and 3-axis accelerometer (#C3325) RHD channel amplifier board with 128 unipolar inputs (#C3316) 2
3 RHD2000 Electrode Adapters RHD2164 amplifier board with 64 unipolar inputs (#C3315) RHD2164 amplifier / accelerometer board with 64 unipolar inputs and 3- axis accelerometer (#C3325) Amplifier Boards with 2x Omnetics A pin Connectors Direct connection to NeuroNexus H64LP electrode connectors with 2x Omnetics NPD-36 connectors with 4 guide posts each or two of the adapters shown below. Amplifier Boards with Omnetics A pin Connector RHD2132 amplifier board with 32 unipolar inputs (#C3314) RHD2216 amplifier board with 16 bipolar inputs (#C3313) RHD2132 amplifier / accelerometer board with 32 unipolar inputs and 3-axis accelerometer (#C3324) RHD2216 amplifier / accelerometer board with 16 bipolar inputs and 3-axis accelerometer (#C3323) Direct connection to electrodes with Omnetics NPD-36 connectors with 4 guide posts such as NeuroNexus CM, OCM, and H32 chronic electrode connectors, Plexon CON/32m-V connector, or Blackrock CerePlex M connector. or or RHD pin wire adapter for 36-pin connector (#C3420) RHD2000 electrode adapter board with 36-pin connector (#C3410) Wires may be soldered into holes, or 16-pin DIP socket (included) may be soldered onto board to connect to a NeuroNexus A, OA, or D16 acute electrode connector. RHD channel amplifier board with 16 unipolar inputs (#C3334) Amplifier Boards with Omnetics A pin Connector Direct connection to electrodes with Omnetics NPD-18 connectors with 2 guide posts such as NeuroNexus CM, OCM, and HC16 chronic electrode connectors. or RHA/RHD pin wire adapter for 16-channel amplifier board (#B7600) For more information on these items, see the RHD2000 evaluation system datasheet at 3
4 RHD2000 Dual Headstage Adapters The RHD2000 dual headstage adapter allows two amplifier boards to share a single SPI interface cable. (Cannot be used with the RHD channel amplifier board.) For more information, see the RHD2000 dual interface adapter datasheet at RHD2000 dual headstage adapter (#C3440) A 96-channel headstage with accelerometer created by combining an RHD2164 amplifier board with an RHD2132 amplifier/accelerometer board. to RHD2000 USB interface board A 128-channel headstage created by combining two RHD2164 amplifier boards. to RHD2000 USB interface board 4
5 RHD2000 SPI Cable Adapters The RHD2000 SPI cable adapter board provides a convenient way to access all 12 wires in an RHD2000 SPI interface cable. These boards may be used to develop interfaces between custom hardware under development and existing Intan products. For more information, see the RHD2000 SPI cable/connector specification at RHD2000 SPI interface cable RHD2000 SPI cable adapter board for custom SPI interface applications (#C3430) SPI interface cable plugged into cable adapter board Two RHD2000 SPI cable adapter boards may be used to pass SPI interface signals through a custom connector or commutator, as shown here. For more information, see the RHD2000 Application note: Adapting SPI cables to a commutator at to RHD2000 USB interface board commutator SPI interface cable plugged into cable adapter board Wire T1 to B1, B1 to T1, etc. to RHD2000 amplifier board 5
6 RHD2000 Interface Software Intan Technologies offers free, open-source interface software that allows users to acquire data from the RHD2000 Evaluation System. A compiled, executable version of this software for Windows, as well as the C++/Qt source code, is available at The RHD2000 MATLAB Toolbox (#S2120) is available for users who wish to integrate the RHD2000 Evaluation System directly with MATLAB. For more information on the MATLAB toolbox, see The RHD2000 LabVIEW Library (#S2100) allows users to control the RHD2000 Evaluation System directly from LabVIEW. For more information on the LabVIEW library, see 6
7 RHD2000 Electroplating Board The RHD2000 electroplating board (#C3180) works with the 128-channel amplifier board. Together, these modules support automated electroplating of microelectrode arrays. Includes USB 2.0 cable and power source. For more information on these items, see 7
8 RHD2000 Digital Electrophysiology Chips RHD2216 digital electrophysiology chip with 16 2 bipolar (differential) inputs in QFN surface-mount package (#D8213) as bare die (#P8003) RHD2216 and RHD2132 chips are available in standard 8.0 mm 8.0 mm 56-pin QFN surface mount packages (left and above left) and as 4.8 mm 4.1 mm bare die (above right). RHD2164 chips are available as 7.3 mm 4.2 mm bare die only. RHD2132 digital electrophysiology chip with 32 unipolar inputs and common reference input in QFN surface-mount package (#D8214) as bare die (#P8004) RHD2164 digital electrophysiology chip with 64 unipolar inputs and common reference input as bare die only (#P8005) For more information on these items, see the RHD2000 series digital electrophysiology interface chip datasheet at 8
intan intan RHD2000 Dual Headstage Adapter RHD2000 Dual Headstage Adapter Features Applications Description TECHNOLOGIES, LLC
RHD2000 Dual Headstage Adapter 20 September 2016 Features Allows two RHD2000 amplifier boards to share a single SPI interface cable Compatible with any Intan Technologies amplifier boards in the RHD2000
intan intan RHD2000 Intan 512ch/1024ch Recording Controller Intan Recording Controller User Guide Features Description TECHNOLOGIES, LLC
RHD2000 Intan 512ch/1024ch Recording Controller 31 October 2016 updated 9 October 2018 Features SuperSpeed USB3 interface to Intan Technologies RHD2000-series digital electrophysiology chips. Up to 512
intan intan RHD Channel Amplifier Board RHD Channel Amplifier Board Description Features Applications TECHNOLOGIES, LLC
RHD2000 128 Channel Amplifier Board 24 February 2015; updated 16 August 2017 Features Small (35 mm x 19 mm x 4 mm), lightweight (1.82 g) circuit board containing two RHD2164 64-channel amplifier chips
ADPT-HS36-N2T-32A User Manual
ADPT-HS36-N2T-32A User Manual Adapter for 32 Channel NeuroNexus Probe Table of Contents 1 Adapter Connections... 3 1.1 HS-36 Connection... 3 1.2 ADPT-HS36-N2T-32A Mounting... 3 1.3 Electrode Connection...
QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications
QR/P8 SERIES Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications General QR/P8 Series is a series of small connectors for rack and panel application. This is a
36-Ch Moog Commutator Adapter Instructions for Use
36-Ch Moog Commutator Adapter Instructions for Use PN 7968 Blackrock Microsystems, LLC 391 Chipeta Way, Suite G Salt Lake City, UT 84108 Tel: (866) 806-3692 www.blackrockmicro.com 1 Hardware 1.1 36-Ch
HS-18 User Manual. A preamplifier headstage with 18 channels of unity gain including 16 electrode channels and 2 references.
A preamplifier headstage with 18 channels of unity gain including 16 electrode channels and 2 references. Neuralynx, Inc. 105 Commercial Drive, Bozeman, MT 59715 Phone 406.585.4542 Fax 866.585.1743 www.neuralynx.com
intan intan RHD2216-SHIELD RHD2216 Arduino Shield Description Features TECHNOLOGIES, LLC
RHD2216-SHIELD RHD2216 Arduino Shield 3 February 2017; updated 22 January 2018 Features Simple plug-in connection to Arduino Uno microcontroller (not included). Open-source Arduino C++ software and hardware
The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors.
Date: 25 July 2008 www.quicksilvercontrols.com SilverNugget N3 M-Grade The SilverNugget is a servo controller/driver for NEMA 34 frame microstep motors. Property of Page 1 of 13 This document is subject
IX-228/S Data Acquisition Unit
Hardware Manual IX-228 IX-228S Overview The IX-228 Data Acquisition System has 10 input channels and a low voltage stimulator. The IX-228S adds an isolated high voltage stimulator. Channels 1 and 2 can
Blackrock 32-Channel Cabrio Butterfly Ref Adapter Instruction for Use
Blackrock 32-Channel Cabrio Butterfly Ref Adapter PN-6852 Blackrock Microsystems LLC 630 Komas Drive, Suite 200 Salt Lake City, UT 84108 Tel: +1-801-582-5533 www.blackrockmicro.com 1 System Overview The
Sierra Radio Systems. Digital Compass. Reference Manual. Version 1.0
Sierra Radio Systems Digital Compass Reference Manual Version 1.0 Contents Digital compass board RS485 power injector For more information, go to the Sierra Radio Systems web site at www.sierraradio.net
QR/P4 SERIES. Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
QR/P4 SERIES Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels General QR/P4 Series is a series of small connectors for rack and panel application. This is a smaller-size version
Axona Product Catalogue (Rev. 1.1) 15/10/2015
Axona Product Catalogue (Rev. 1.1) 15/10/2015 Axona Ltd Unit 4U St. Albans Enterprise Centre Long Spring, Porters Wood St. Albans, Herts, AL3 6EN United Kingdom http://www.axona.com support@axona.com Table
The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors.
Date: 5 November 2008 www.quicksilvercontrols.com SilverNugget N2 M-Grade The SilverNugget is a servo controller/driver for NEMA 17 & 23 frame microstep motors. Property of Page 1 of 13 This document is
EtherCAT Slave. EtherCAT Data Transition. EtherCAT Tool: TwinCAT. Taiwan Pulse Motion Co.,Ltd
EtherCAT Slave In network, the master sends an Ethernet frame passing through all of the slave nodes. Each datagram is a command that consists of a header, data and a working counter. datagrams are sent
This presentation will..
Component Identification: Digital Introduction to Logic Gates and Integrated Circuits Digital Electronics 2014 This presentation will.. Introduce transistors, logic gates, integrated circuits (ICs), and
AIO LN-USB. Features. N Series for USB Multifunction DAQ Unit (8ch AI, 2ch AO, 16ch DIO) AIO LN-USB 1. Ver.1.01
N Series for USB Multifunction DAQ Unit (8ch AI, 2ch AO, 16ch DIO) AIO-120802LN-USB This product is a USB2.0-compliant analog I/O unit that extends the analog I/O function of USB port of PCs. Compact design
HS-27-Mini. Headstage preamplifier providing 27 channels of unity gain amplification.
HS-27-Mini Headstage preamplifier providing 27 channels of unity gain amplification. 9/16/2013 Neuralynx, Inc. 105 Commercial Drive, Bozeman, MT 59715 Phone 406.585.4542 Fax 866.585.1743 www.neuralynx.com
Lab Rat User Guide Updated: 2/9/2018
Lab Rat User Guide Updated: 2/9/2018 ii LAB RAT USER GUIDE 2018 Tucker-Davis Technologies, Inc. All rights reserved. Tucker-Davis Technologies 11930 Research Circle Alachua, FL 32615 Tel. +1 386.462.9622
DT8824 High Stability, High Accuracy, Ethernet Instrument Module
DT8824 High Stability, High Accuracy, Ethernet Instrument Module The DT8824 Ethernet data acquisition (DAQ) module offers the highest stability and accuracy for measuring analog signals. Every signal input,
Agilent 84904, 6, 7K/L Programmable Step Attenuators
Agilent 84904, 6, 7K/L Programmable Step Attenuators Data Sheet High Accuracy,Excellent Reliability, Long Life Features and description DC to 26.5 GHz, DC to 40 GHz frequency coverage Optional calibration
Ensemble QL andqle Networked Panel-Mount Piezo Drive
Ensemble QL and QLe Motion Controllers Ensemble QL andqle Networked Panel-Mount Piezo Drive Networkable with any Ensemble drive to control up to ten axes of piezo and/or servo motor stages Single or Multi-axis
HS-27 Manual 5/2/2013. Neuralynx, Inc. 105 Commercial Drive, Bozeman, MT Phone Fax
5/2/2013 Neuralynx, Inc. 105 Commercial Drive, Bozeman, MT 59715 Phone 406.585.4542 Fax 866.585.1743 www.neuralynx.com support@neuralynx.com Table of Contents 1 Headstage 27 Overview... 3 2 Glossary...
Phase Loss Protection Upgrade. Phase Loss Protection Upgrade. In this bulletin:
Phase Loss Protection Upgrade In this bulletin: Introduction... 2 Purpose... 2 General... 2 Applicability... 2 HD3070 Phase Loss Protection Upgrade Kit Parts... 2 Preparation... 4 Install the Phase Loss
iworx RA-834 Recorder
iworx RA-8 Recorder Hardware Manual iworx RA Recorder (IX-RA-8) Overview The iworx RA Recorder is the most advanced and feature-rich physiological data acquisition system on the market. It comes standard
Contactors and Contactor Assemblies
RT contactors, size S00 The product range at a glance The new generation is a complete, modular system family, logically designed right down to the last detail, from the basic units to the accessories.
WIRELESS RF Implantable Stimulation User s Manual
WIRELESS RF Implantable Stimulation User s Manual Triangle BioSystems International 2224 Page Rd. Suite 108 Durham, NC 27703 Phone: (919) 361-2663 Fax:(919) 544-3061 www.trianglebiosystems.com Table of
CerePlex A. Instructions for Use. 630 Komas Drive Suite 200. Salt Lake City UT USA P F
630 Komas Drive Suite 200 Salt Lake City UT 84108 USA P +1 801.582.5533 F +1 801.582.1509 www.blackrockmicro.com CerePlex A Instructions for Use Revision 2.00 / LB-0464 CerePlex A IFU Table of Contents
TECHNICAL NOTE. VS1000: Evaluation Kit EVBA_2.0. Contents. EVBA_2.0 is a plug and play Evaluation Kit for Colibrys VS1000 accelerometers line.
VS1000: Evaluation Kit EVBA_2.0 EVBA_2.0 is a plug and play Evaluation Kit for Colibrys VS1000 accelerometers line. To facilitate the integration in user environment and easily verify the excellent performances
Digital Power Probes, ACL120, ACL220, ACL Internal, and DCL5 (#30015, #30023, #30024, #30025)
Digital Power Probes, ACL120, ACL220, ACL Internal, and DCL5 (#30015, #30023, #30024, #30025) This series of digital power probes by Networked Robotics is used to record a yes/no indication of the presence
SENSING A WORLD OF POTENTIAL TM. Dry Sensor Interface DSI 10/20. Simple Ambulatory No-prep Dry EEG System
SENSING A WORLD OF POTENTIAL TM Dry Sensor Interface DSI 10/20 Simple Ambulatory No-prep Dry EEG System SENSING A WORLD OF POTENTIAL TM The Dry Sensor Interface s SANDTechnology Simple: Headset is typically
Kit# KOV ModBox IR REMOTE CONTROL KIT
ModBox Installation Instructions Kit# KOV-106-000-07 ModBox IR REMOTE CONTROL KIT INTRODUCTION: This kit adds IR Volume and Cancel Control to ModBox Jukeboxes. TOOLS REQUIRED: 1/4" nut driver, Philips
Power Supply, Arduino MEGA 2560, and Stepper Motors Connections
Power Supply, Arduino MEGA 2560, and Stepper Motors Connections By: Maram Sulimani Abstract: Arduino MEGA 2560 is required for this project to control the movement of the 3D printer axis and its extruder.
Number Name Description Notes Image 0101 Resistor, 100 ohm. brown-black-browngold. ¼ watt, 5% tolerance, red-red-brown-gold. brown-black-red-gold.
Passive Components 0101 Resistor, 100 brown-black-browngold. 690620 0102 Resistor, 220 red-red-brown-gold. 690700 0103 Resistor, 1000 brown-black-red-gold. 690865 0104 Resistor, 10k 0201 Capacitor, 1 µf,
DLP-RFID2-EDK2 SETUP PROCEDURE
DLP-RFID2-EDK2 SETUP PROCEDURE This product is designed to make it easy to both test the DLP-RFID2 module without developing your own hardware and provide an easy-to-use platform for those wishing to program,
The Information contained herein is subject to change without notice. Revisions may be issued regarding changes and/or additions.
Pepper 43R TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect, special or consequential damages.
Digital EEG System Series
NEURON-SPECTRUM Digital System Series rom 8 to 21 channels up to 4 channels to record EMG, ECG, EOG, etc. Acquisition and review of in arbitrary monopolar and bipolar montages, EP, PSG acquisition Impedance/acquisition
XBee USB Adapter Board (#32400)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Anadigm FPAA Solutions Training Class III
Anadigm FPAA Solutions Training Class III Agenda Learning Goals Evaluation board components Board architecture Power connection COM connection Output connection Development board Verify proper connection
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article Images Company Robotic Arm PC Interface allows real time computer control and an interactive script writer/player for programming and
Touch Sense Controller
Touch Sense Controller Paul Boston May 11, 2011 (Modified May 22, 2014) (Modified Dec 28, 2015) The Touch Sense Controller is a microprocessor-controlled circuit designed to provide a switch closure when
Intan CLAMP System. Voltage/Current Clamp User Guide. Intan CLAMP System. Features. Description
Intan CLAMP System Voltage/Current Clamp User Guide 16 September 2016; updated 5 April 2017 Features Complete, miniaturized patch clamp amplifier system with small digital headstages using revolutionary
Agilent 7061A and 87130A Switch Attenuator Drivers
Agilent 7061A and 87130A Switch Attenuator Drivers Configuration Guide The purpose of this document is to aid the user in configuring switching systems utilizing Agilent Technologies switch and attenuator
Introduction to MATLABs Data Acquisition Toolbox, the USB DAQ, and accelerometers
Introduction to MATLABs Data Acquisition Toolbox, the USB DAQ, and accelerometers This week we will start to learn the software that we will use through the course, MATLAB s Data Acquisition Toolbox. This
Construction manual. (Almost Ready To Control) Stand , V1.05
V.3 ARTC Construction manual V.3 ARTC (Almost Ready To Control) Stand 5.08.206, V.05 Qube Solutions UG (limited liability) Arbachtalstr. 6, 72800 Eningen, GERMANY http://www.qube-solutions.de/ http://
4X4 Driver Shield Manual
3/31/2012 4X4 Driver Shield Manual High current, high side switching for Arduino Logos Electromechanical 4X4 Driver Shield Manual High current, high side switching for Arduino Introduction The Logos Electromechanical
Application Note #1447. Introduction. Standard Products. Optima Series Interconnect Options
Jan-10 Application Note #1447 Optima Series Interconnect Options Introduction This application note details the various methods of available connections for the Optima series motion controllers. These
Hauptwerk Hardware 2016
Hauptwerk Hardware Interface Board for the Universal Midi Encoder User Manual Page 1 Release 1.2 February 2016 Table of Contents Introduction...3 Board Overview...4 IMPORTANT PLEASE READ...5 Mounting...6
Scalable Neural Recording Interface with Real-time Spike Sorting. NGNI-V1 Platform
Scalable Neural Recording Interface with Real-time Spike Sorting NGNI-V1 Platform OVERVIEW Spike Sorting On-Node and Real-Time Spike Sorting is the process of deinterleaving a recorded neural signal in
Isolated Voltage Input 7B31 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated Voltage Input 7B31 FEATURES Interfaces, amplifies, and filters unipolar and bipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V, linear with temperature.
Stimulation User s Manual. Version 2.0
Stimulation User s Manual Version 2.0 Triangle BioSystems International 2224 Page Rd. Suite 108 Durham, NC 27703 Phone: (919) 361-2663 Fax: (919) 544-3061 www.trianglebiosystems.com Table of Contents Document
Portable Device for High Resolution ECG Mapping
Portable Device for High Resolution ECG Mapping V. Rosík, S. Karas, E. Hebláková, M. Tyšler, S. Filipová Department of Biomeasurements, Institute of Measurement Sciences, SAS, Dúbravská cesta 9, 841 04
3RT, 3TB, 3TF Contactors for Switching Motors
RT, TB, TF Contactors for Switching Motors Overview RT contactors and coupling relays Size S00 with mountable accessories The SIRIUS generation of controls is a complete, modular system family, logically
Mayhew Labs. Extended ADC Shield User Manual
Table of Contents: Introduction 1 Hardware Description 1 Pin Descriptions 2 Setting the SPI communication level 2 Setting User Defined pin usage 2 Freeing Up Pin 9 (BUSY) 2 Installing Input Filtering Capacitors
DT Channel Analog Input USB DAQ Module. Key Features:
DT9844 32-Channel Analog Input USB DAQ Module Ultra High-Accuracy: 20-bits, 0.01% Very High-Speed: 1 MHz sampling Low Noise, Low Crosstalk: -80dB @ 1kHz, 500kHz settling ±500V Tri-sectional Isolation:
Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-1A8 Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB GSV-1A8USB SubD1 (front side) GSV-1A8USB M12 (front side) GSV-1A16USB (rear side) GSV-1A8USB K6D (front side)
Mounting Card MC1XDZR02-HP1
Description The MC1XDZR02-HP1 mounting card is designed to host a DZR or DZXR series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a
Advantys ETB. DATA SHEET Advantys ETB IP 67 Ethernet Digital I/O Modules. Description. Features
Advantys ETB DATA SHEET Advantys ETB IP 67 Ethernet Digital I/O Modules The Advantys ETB family of IP 67 digital I/O modules with direct connection to the Ethernet ( Modbus TCP/IP ) Communication Network.
Application Note #1447. Introduction. Standard Products. Optima Series Interconnect Options
Apr-06 Application Note #1447 Optima Series Interconnect Options Introduction This application note details the various methods of available connections for the Optima series motion controllers. Interconnect
SX100A. Features. Typical Applications. Description
Datasheet -- Pressure Sensors: Measurement Type: Absolute; 0 psia to 100 psia, Unamplified, Representative photograph, actual product appearance may vary. Due to regional agency approval requirements,
AlphaBot2 robot building kit for Arduino
AlphaBot2 robot building kit for Arduino SKU 110060864 Description This AlphaBot2 robot kit is designed to use with an Arduino compatible board UNO PLUS. It features rich common robot functions including
DVI KVM. Extra Long Range Extender Over One CAT5. User Manual EXT-DVIKVM-ELR. Release A8
DVI KVM Extra Long Range Extender Over One CAT5 EXT-DVIKVM-ELR User Manual Release A8 Important Safety Instructions 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all
Ndrive QL andqle Digital Panel-Mount Piezo Drive
Ndrive QL and QLe Amplifiers/Drives Ndrive QL andqle Digital Panel-Mount Piezo Drive Real-time distributed control architecture allows synchronized motion control on up to 32 axes of piezo and/or servo
Dwarf Boards. DN001 : introduction, overview and reference
Dwarf Boards DN001 : introduction, overview and reference (c) Van Ooijen Technische Informatica version 1.6 PICmicro, In-Circuit Serial Prograing and ICSP are registerd trademarks of Microchip Technology
HS-36 Manual. Headstage 36 Unity Gain Pre-amplifier
HS-36 Manual Headstage 36 Unity Gain Pre-amplifier Table of Contents 1 Overview... 3 2 Headstage Amplifier Input Pins (EIB connection)... 4 3 HS-36 Amplifier Output Pins... 5 4 HS-36 Tether Adaptor Pins
Isolated, Voltage or Current Input 7B30 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Voltage or Current Input 7B30 FEATURES Interfaces, amplifies and filters unipolar and bipolar millivolt and voltage inputs. Provides a protected precision output of either +1 V to +5 V or 0 V
SGD 24-M420 Current Loop Indicator PanelPilot Compatible Smart Graphics Display
Features 2.4 colour TFT screen Use PanelPilot software, to setup and customise the display. Compatible with Windows XP, Vista and Windows 7. Multiple configurations included free Programmable via the USB
Datasheet-MA860 Stepper Motor Driver
Datasheet-MA860 Stepper Motor Driver Introduction The MA860 is an economical micro-stepping driver based on patented technology of EDRIVE. It is suitable for driving 2-phase and 4-phase hybrid stepping
USB DIO High Voltage and Relay
DIO High Voltage and -PDISO, -ERB, and - Series -PDISO Series -ERB Series - Series Overview Measurement Computing DIO high voltage and relay product offerings include the -PDISO Series, -ERB Series, and
ADI12-8(USB)GY. Features. Packing List. F&eIt Series Isolated Analog Input Module for USB ADI12-8(USB)GY 1. Ver.1.02
F&eIt Series Isolated Analog Input Module for USB ADI128(USB)GY This product is a USB2.0 compatible terminal module that extends the analog input function of USB port of PCs. This product features 8ch
SX15GD2. Features. Typical Applications. Description
Datasheet -- Pressure Sensors: Measurement Type: Gage; 0 psid to 15 psid, Unamplified, "D2" DIP Representative photograph, actual product appearance may vary. Due to regional agency approval requirements,
PS25255 EPIC QFN sensor, electrophysiology, low gain, low power Datasheet
PS25255 EPIC QFN sensor, electrophysiology, low gain, low power Datasheet Fig. 1 PS25255 (top and bottom) Plessey Semiconductors Electric Potential Integrated Circuit (EPIC) product line targets a range
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
Mounting Card MC1XDZR02-QD
Description The MC1XDZR02-QD mounting card is designed to host a DZR or DZRC series DigiFlex Performance TM digital servo drive. The drive plugs into the bottom side of the mounting card, providing a compact
Mechanical specifications Dimensions (L x W x H) 290 x 125 x mm Weight 445 g. Female DC Barrel Jack Socket 5.5x2.1 mm
Mirror Driver v1.0 The Mirror Driver v1.0 consists of two main hardware blocks. The first acts as a Data Acquisition (DAQ) board while the second is an FPGA evaluation kit which is used as a Digital Signal
SX01DN. Features. Typical Applications. Description
Datasheet -- Pressure Sensors: Measurement Type: Differential, Gage; 0 psid to 1 psid, Unamplified, Ported "N" Package - Straight Port Representative photograph, actual product appearance may vary. Due
TH E FI N EST I N G E E K E NTE RTAI N M E NT
HACKING the C a b l e M o d e m W h at c a b l e c o m pa n i e s d o n t wa n t yo u t o k n o w DerEngel BUILDING A CONSOLE CABLE The device shown in Figure 17-1 is an RS-232 to TTL converter board,
QR/P SERIES PLUG-IN CRIMP CONNECTORS
QR/P SERIES PLUG-IN CRIMP CONNECTORS General QR/P series connectors have been developed for Plugin Connection Power and Signal Circuits in copier machine or other equipments which impose the connectors
K-Beam Accelerometer. Acceleration. Capacitive MEMS, Triaxial Accelerometer. Type 8395A...
Acceleration K-Beam Accelerometer Type 8395A... Capacitive MEMS, Triaxial Accelerometer Type 8395A is a high-sensitivity, low noise triaxial accelerometer which simultaneously measures acceleration and/or
Safety. Features 1 ID: Make all the connections before you plug in the main power. DMX512 Controllable and RDM Configurable
Features DMX512 Controllable and RDM Configurable Designed for driving LED strips through 6 high power 12 and 24 Volts output units available Easy addressing interface (physical switches and RDM) Isolated
HH Channel Data Logging Headstage Manual. Version 6
HH128 128-Channel Data Logging Headstage Manual Version 6 Table of Contents 128-Channel Data Logging Headstage (HH128)... 3 Introduction... 3 Headstage Connection to Electrodes... 5 Configuration... 7
WICE-SPI Hardware Operation Manual
WICE-SPI Hardware Operation Manual 1. Hardware Instruction 1. WICE-SPI processes data transmission, programming or emulation through USB 2.0 interface and does not need external power. 2. WICE-SPI is equipped
Raspberry Pi Compute Development board
Raspberry Pi Compute Development board TM Gumstix, Inc. shall have no liability of any kind, express or implied, arising out of the use of the Information in this document, including direct, indirect,
RKP08 Component List and Instructions
RKP08 Component List and Instructions PCB layout Constructed PCB RKP08 Scematic RKP08 Project PCB Page 1 Description The RKP08 project PCB has been designed to use PIC microcontrollers such as the Genie
Temperature Measurement Instruments Ultra-Accurate... by Design
TEMPpoint Type: Temperature Measurement Instrument Temperature Measurement Instruments Ultra-Accurate... by Design TEMPpoint is a family of temperature measurement instruments designed for high accuracy
LED PAR56 Order Code: P56-151
LED PAR56 Order Code: P56-151 www.cobrainternational.com User Manual COBRA P56-151 Dear Customer, Thank you for purchasing the COBRA P56-151. Cobra is one of the leading manufacturers of professional equipment
Getting started with your DGH module:
Getting started with your DGH module: This document contains step-by-step instructions to quickly connect and communicate with your new DGH modules. For most applications, new modules require a one-time
PRODUCT SHEET INTERFACE MODULES
INTERFACE MODULES HLTC UIMC When connecting the analog output sourcing from external devices to the MP or MP, channel contention must be considered. To connect external device outputs to the MP or MP:
MP3 audio amplifier. Build Instructions. Issue 2.0
MP3 audio amplifier Build Instructions Issue 2.0 Build Instructions Before you put any components in the board or pick up the soldering iron, just take a look at the Printed Circuit Board (PCB). The components
OMX-CI-RS232 Control Interface
Control Interface 970 Rev. B 0.0. Description Integrates GRAFIK 000TM, GRAFIK 000, GRAFIK 7000TM, Softswitch8, and LCP8 systems with a touchscreen or other digital equipment that supports RS communication.
K-Beam Accelerometer. Acceleration. Capacitive MEMS, Triaxial Accelerometer. Type 8396A...
Acceleration K-Beam Accelerometer Type 8396A... Capacitive MEMS, Triaxial Accelerometer Type 8396A is a high-sensitivity, low noise triaxial accelerometer which simultaneously measures acceleration and/or
6A27 6A40 6A68 6A154 6A175
6A154 Interface's 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about those same axes. Six full bridges provide mv/v output on six
GRX-CI-RS232 Control Interface
Control Interface 369364c 1 04.07.17 Description Integrates a GRAFIK Eye Lighting and Shade Control System with a touchscreen, PC, or other digital equipment that supports RS232 communication. Provides
Prototyping Module Datasheet
Prototyping Module Datasheet Part Numbers: MPROTO100 rev 002 Zenseio LLC Updated: September 2016 Table of Contents Table of Contents Functional description PROTOTYPING MODULE OVERVIEW FEATURES BLOCK DIAGRAM
Quick Start Guide. Stepper motor driver expansion board based on L6474 for STM32 Nucleo (X-NUCLEO-IHM01A1) Version 1.
Quick Start Guide Stepper motor driver expansion board based on L6474 for STM32 Nucleo (X-NUCLEO-IHM01A1) Version 1.1 (July 07, 2015) Overview 2 1 Introduction to the STM32 Open Development Environment
Power & Communication Cables
Power & Communication Cables CBLSM-M & CBLSM-X series is the main power and communications cable consisting of a 7W main motor connector split out to a pre-wired RS- DB- connector to plug directly into
IMP-2MC ELECTRODE IMPEDANCE TESTER MULTICHANNEL
MicroProbes for Life Science IMP-2MC ELECTRODE IMPEDANCE TESTER MULTICHANNEL User Instructions Version: January, 2016 18247-D Flower Hill Way Gaithersburg, MD 20879 Phone: +1 301 330-9788 Fax: +1 301 330-9667
Isolated, Voltage or Current Input 7B41 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Voltage or Current Input 7B41 FEATURES Interfaces, amplifies and filters unipolar and bipolar voltage inputs. Module provides a precision output of either +1 V to +5 V or 0 V to +10 V. All 7B41
Multi-channel system install guide
www.coachsound.com Multi-channel system install guide MLA2500 Tourmaster MLS2500 Soundserver 1 HEAD UNIT... 2 1.1 Power and control signals... 2 1.2 GPS connection (MLA2500 only)... 2 1.3 Drivers control