Operating Instructions. Digital Wireless Stereo Earphones RP-NJ300B. Model No. TQBM0042

Transcription

1 Operating Instructions Digital Wireless Stereo Earphones Model No. RP-NJ300B GC TQBM0042

2 Dear customer Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Table of contents Before use Accessories... 2 Safety precautions... 3 Part names... 4 Preparation Charging... 4 Turning the power on/off... 5 Connecting a Bluetooth device... 5 How to wear the earphones... 6 Accessories Please check and identify the supplied accessories. 1 USB charging cord 1 Earpieces set (L, S) M-size earpieces are attached at the time of purchase. Operation Listening to music... 6 Making a phone call... 7 Useful functions... 7 Other Restoring to the factory settings... 7 Maintenance... 8 Copyright, etc About Bluetooth... 8 Troubleshooting guide... 9 Specifications To remove the battery when disposing of this unit

3 Safety precautions Unit Avoid using or placing this unit near sources of heat. Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. Do not block the ventilation of this unit with items such as cloth for long periods of time while charging or while the power is on. Earpieces Keep the earpieces out of reach of children to prevent swallowing. Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. Allergies Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions. Precautions for listening with the Earphones Do not use your earphones at a high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Do not use while operating a motorised vehicle. It may create a traffic hazard and is illegal in many areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. This unit is intended for use in moderate and tropical climates. USB Do not use any other USB charging cords except the supplied one. Caution: Use only the supplied USB charging cord when connecting to a computer. 3

4 Part names 8 Left 2 Right Earphone 2 Earpiece 3 Remote controller 4 LED indicator light* The number of blinks or color notifies the status of the unit. (* hereafter referred to as LED ) 5 Charging terminal (DC IN) Open the USB lid and connect the USB charging cord (supplied) to this terminal when charging. (See Charging ) 7 Remote controller 6 USB lid 7 Microphone 8 Battery case (Please remove the battery when disposing of this product. P. 11) 9 Volume + / Next 10 Power / Pairing / Play / Pause / Call 11 Volume / Previous Do not use any other USB charging cords except the supplied one. When using the unit, do not cover the remote controller with the palm of your hand. The Bluetooth connection may be blocked Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. 1 2 Connect this unit to a computer using the USB charging cord Within approximately 3 seconds after the connection is established, the LED on the remote controller will light in red. The LED lights in red when charging is in progress. When charging is completed, the LED will go out. Charging will take approximately 1.5 hours from empty state to fully charged. (Quick charging time for 60 minutes operation: Approx. 20 minutes) Close the charging terminal cover securely 1.5 hours Off Computer USB charging cord (supplied) Do not touch the charging terminal with wet hand If sweat or liquid is attached to the charging terminal, malfunction may occur. The Bluetooth feature cannot be used when this unit is connected to a computer using the USB charging cord. Charge in a room temperature of between 10 C and 35 C. If PC used for charging enters sleep mode, charging may not take place. To avoid product damage, do not expose this product to rain, sweat, water or other liquids. The product illustrations may differ from the actual product. 4

5 Turning the power on/off 1 In the power-off state, press and hold the power of this unit for approx. 3 seconds until the LED (blue) blinks A beep will sound, and the LED (blue) on the remote controller will blink slowly. To turn the power off Power Press and hold for approximately 3 seconds. A beep will sound and the power will be turned off. When the unit is not operated for approximately 5 minutes, the power will automatically turn off. (See Auto power off ( P. 7)) LED Connecting a Bluetooth device Preparation Place the Bluetooth device within approx. 1 m from the unit. Check the device operation using its operation instructions as required. Pairing (Registration) this unit with the Bluetooth device for connection 1 In the power-off state, press and hold the power button of this unit until the LED blinks When pairing a device for the first time : approx. 3 seconds When pairing a second or subsequent devices : approx. 5 seconds The unit starts to search for the Bluetooth device for connection, and the LED will blink in blue and red alternately. 2 Turn on the power of the Bluetooth unit, and enable the Bluetooth function 3 4 Select RP-NJ300B from the Bluetooth device s menu The MAC address ( stands for a character that is unique to each set.) may be displayed before RP-NJ300B is displayed. If prompted for a passkey, input the passkey 0000 (four zeros) of this unit. Check the connection with the Bluetooth device on the unit The LED will blink in blue and red alternately until the connection with the device is completed. When an electronic sound beeps and the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) (Ex.) Bluetooth Bluetooth Device RP-NJ300B ON Select If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairing again. You can pair up to 8 Bluetooth devices with this unit. If a 9th device is paired, the device with the oldest connection will be replaced. To use it, perform pairing again. 5

6 Listening to music Connecting a paired Bluetooth device 1 2 Turn on the unit Press and hold the power button of this unit for approx. 3 seconds until the LED (blue) blinks. A beep will sound, and the LED (blue) will blink slowly. Perform steps 2 and 3 of Pairing (Registration) this unit with the Bluetooth device for connection ( P. 5) When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection established) This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see above). If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Perform pairing again. ( P. 5) How to wear the earphones The left earphone has the marking point as shown in the illustration. Marking point Attension M-size earpieces are attached at the time of purchase. If they are not the right size, replace them with S or L-size earpieces (supplied). If the Bluetooth compatible device supports the A2DP and AVRCP Bluetooth profiles, music can be played back with remote control operations on the unit. A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit. AVRCP (Audio/Video Remote Control Profile): Allows remote control of the device using the unit. 1 Connect the Bluetooth device and the unit ( P. 5) 2 Select and play the music on the Bluetooth device The selected music is output to the earphones of the unit. Operating time of battery Battery type Operating time Rechargeable battery (installed in the unit) Approx. 4 hours 20 minutes Operating time may be less depending on the operating conditions. Attention The unit might leak sound depending on the volume level. When the volume is increased to near maximum level, music may sound distorted. Decrease the volume until the distortion is cleared. Remote controlling You can control the Bluetooth device using the unit. Depending on Bluetooth devices, some functions below do not work, or work differently via operation of the unit. (Operation example) Play / Pause / Call Remote controller Press Play / Pause / Call Press twice quickly Reject the incoming call / Switch the calling device Previous / Next / Volume Press Increase the volume + Press and hold Forward to the start of next track Press Decrease the volume Press and hold Return to the start of current track Volume + / Next Play / Pause / Call Volume / Previous The volume can be adjusted in 15 levels. When the maximum or minimum volume is reached, a beep will sound. Increase/Decrease the volume function is not available while pause. 6

7 Making a phone call With Bluetooth enabled phones (cell phones or smartphones) that support the HSP or HFP Bluetooth profile, you can use the unit for phone calls. HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication using the microphone on the unit. HFP (Hands-Free Profile): In addition to the HSP functions, this profile has the incoming and outgoing calls function. 1 Connect the Bluetooth enabled phone and unit 2 When answering an incoming call 3 4 Press on the unit and answer the call During an incoming call, ringtone will sound from the earphones and the LED will blink. (HFP only) To reject the incoming call, press twice quickly until the ringtone stops. Remote controller Call When making an outgoing call Make an outgoing call on the Bluetooth enabled phone Also refer to the operating manual for the Bluetooth enabled phone. (Checking and operation steps on the unit are explained below) During an outgoing call, ringtone will sound from the earphones and the LED will blink. To cancel the outgoing call, press. A beep will sound. Start talking The LED will repeatedly blink 2 times during a call. The volume can be adjusted during a phone call. For setting instructions, see Remote controlling. ( P. 6) Press to end the phone call A beep will sound. There may be instances when hands free setting needs to be done on the Bluetooth enabled phone. Depending on the Bluetooth enabled phone, you may hear incoming and outgoing call ringtones of the phone from the unit. (HFP only) Press twice quickly on the unit. The calling device will be switched between the Bluetooth enabled phone and the unit. Useful functions Resetting the unit This unit can be reset when all operations are rejected. To reset the unit, push button for 10 seconds. All the previous operations will be cancelled. (The pairing device information will not be deleted.) Auto power off If the unit is silent for approximately 5 minutes and operations for Bluetooth devices are idle during that period, a beep will sound and the power will be automatically turned off. LED indicator light When the battery level is low during use of the unit, the blue blinking LED on the remote controller will change to red. A beep will sound every 1 minute. When the battery runs out, the power will turn off. Restoring to the factory settings When you want to delete all pairing device information, etc., you can restore the unit to the factory settings (original settings upon purchase). Charge the battery before restoring the unit. 1 Turn the power off, and press and hold for approximately 5 seconds Start searching for Bluetooth devices to connect. 2 Press and hold + and for 5 seconds or more simultaneously while searching The LED will blink fast in blue. The unit will restore to the factory settings. Attention When pairing a device again, delete the registering information (Device: RP-NJ300B ) from the Bluetooth device s menu, and register this unit with the Bluetooth device again. ( P. 5) 7

8 Maintenance Clean this unit with a dry and soft cloth. Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. Keeping the battery performance During the long period of disuse, full charge this unit once every 6 months to keep the battery performance. Copyright, etc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Other system names and product names appearing in this document are in general the registered trademarks or trademarks of the respective developer companies. Note that the mark and mark do not appear in this document. About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this unit This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. The actions below are punishable by law in some countries: Taking apart/modifying the unit. Removing specification indications. Restrictions of use Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed. All devices must conform to standards set by Bluetooth SIG, Inc. Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. This system supports Bluetooth security features. But depending on the operating environment and/or settings, this security may not be sufficient. Transmit data wirelessly to this system with caution. This system cannot transmit data to a Bluetooth device. Range of use Use this unit at a maximum range of 10 m. The range can decrease depending on the environment, obstacles or interference. Interference from other devices This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth devices or the devices that use the 2.4 GHz band. This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. Intended usage This unit is for normal, general use only. Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 8

9 Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. General The unit does not respond Push button for 10 seconds. The unit will be reset. (The pairing device information will not be deleted.) Power supply and charging Cannot charge the unit Make sure the computer is turned on and is not on standby or sleep mode. Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports. If the measures mentioned above are not applicable, unplug the USB charging cord and plug it in again. If the charge time and operating time become shortened, the battery may have run down. (Number of charging times of the installed battery: Approximately 300.) Charging takes longer Charge in a room temperature of between 10 C and 35 C. LED does not light during charging Is the USB charging cord (supplied) connected firmly to the USB terminal of the computer? ( P. 4) The power does not turn on Is the unit being charged? The power cannot be turned on during charging. ( P. 4) Bluetooth device connection The device cannot be connected Delete the pairing information for this unit from the Bluetooth device, then pair them again. ( P. 5) Sound and audio volume No sound Make sure that the unit and the Bluetooth device are connected correctly. ( P. 5) Check if music is playing on the Bluetooth device. Make sure that the unit is turned on and the volume is not set too low. Pair and connect the Bluetooth device and the unit again. ( P. 5) Low volume Increase the volume of the unit. ( P. 6) Increase the volume on the Bluetooth device. Sound from the device is cut off / Sound quality is bad Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc. The device may be out of the 10 m communication range. Move the device closer to this unit. Remove any obstacle between this unit and the device. Switch off any wireless LAN device when not in use. A communication problem may arise if the battery is not fully charged. Charge the unit. ( P. 4) Phone calls You cannot hear the other person Make sure that the unit and the Bluetooth enabled phone are turned on. Check if the unit and the Bluetooth enabled phone are connected. ( P. 5) Check the audio settings of the Bluetooth enabled phone. Switch the calling device to the unit if it is set to the Bluetooth enabled phone. ( P. 5) If the volume of the other person s voice is too low, increase the volume of both the unit and the Bluetooth enabled phone. 9

10 Specifications General DC 5 V, 0.6 W Power supply (Internal battery: 3.7 V (Li-polymer 90 mah)) Operating time* 1 Approx. 4 hours 20 minutes Charging time* 2 (25 ºC) Approx. 90 minutes Charging temperature range 10 ºC to 35 ºC Operating temperature range 0 ºC to 40 ºC Operating humidity range 35%RH to 80%RH (no condensation) Mass Approx. 13 g * 1 It may be shorter depending on the operating conditions. * 2 Time taken to recharge from empty to full. Bluetooth section Bluetooth system specification Ver. 4.1 Wireless equipment classification Class 2 (2.5 mw) Frequency band 2402 MHz to 2480 MHz Max RF power 4 dbm (EIRP) Supported profiles A2DP, AVRCP, HSP, HFP Supported codec SBC Operating distance Up to 10 m Speaker section Driver units Terminal section DC IN Microphone section Type 9 mm DC 5 V, 0.6 W Mono Accessory section USB charging cord 0.1 m Earpieces set L, S Specifications are subject to change without notice. 10

11 To remove the battery when disposing of this unit 1 2 The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Battery case 3 4 Battery Danger As the rechargeable battery is specifically for this product, do not use it for any other device. Do not charge the removed battery. Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Do not pierce the battery with a nail, subject it to an impact, or dismantle or modify it. Do not let the wires touch any other metal or each other. Do not carry or store the battery with a necklace, hair pin, or the like. Doing so may cause the battery to generate heat, ignite, or rupture. Warning Do not place the removed battery, and other items within reach of infants. Accidental swallowing of such an item may have an adverse effect on the body. In the event that you think such an item has been swallowed, consult a doctor immediately. In the event of fluid leaking from the battery, take the following measure, and do not touch the fluid with bare hands. Fluid entering into an eye may cause loss of eyesight. Wash the eye with water immediately without rubbing it, and then consult a doctor. Fluid getting on your body or clothes may cause inflammation of the skin or injury. Sufficiently rinse with clean water, and then consult a doctor. A lithium-ion polymer rechargeable battery is built in to the battery case. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure, and remove the internal rechargeable battery. Disassemble after the battery runs out. When disposing of the battery, please contact your local authorities or dealer and ask for the correct method of disposal. 1 Put a straight-slot screwdriver (commercially available) into the battery case Make sure to keep fingers away from the tip of the screwdriver. Select a screwdriver to be large enough for a space under the joint part. 2 Use the screwdriver for leverage, push and open the battery case Be careful not to touch the battery with the screwdriver. 3 Hold the battery and remove it 4 Pull off the battery and separate it from the battery case by cutting off the wires, one by one, with scissors Insulate the wire parts of the removed battery with cellophane tape. Do not damage or dismantle the battery. 11

12 Web Site: Panasonic Corporation 2017 En TQBM0042 M0417KZ0