(db)

Transcription

1 75 Video Patchbays 75 Video Patchbays 3G-ready HD-SDI video patchbays featuring Canare s uniquely-developed rotary switches. Panel Size Loaded Video Jacks 2DV 1 U 2 x 2DVS 1 U 2 x DVJB-S 2DV-2U 2 U 2 x 2DVS-2U 2 U 2 x DVJB-S 24DV 1 U 24 x 24DVS 1 U 24 x DVJB-S 24DV-2U 2 U 24 x 24DVS-2U 2 U 24 x DVJB-S 26DV 1 U 26 x 26DVS 1 U 26 x DVJB-S 26DV-2U 2 U 26 x 26DVS-2U 2 U 26 x DVJB-S *Colors other than black are available on custom-made basis. (See page 75) MADE IN CHINA 26DV 15.9 OPENING THIS UNIT WILL VOID WAANTY 75 s DVJB-S VJ-DC Straight Through Dust Cap for Video Jack (color: black 4 pcs) Key Features and Benefits otary switch has been improved for superior isolatinon. Also usable as digital audio patchbay. Can be recessed mm. Wide designation strip (2 U type). Lightweight aluminum alloy video jacks SMPTE ST 424 SMPTE ST Patch Through eturn loss for -6-8 Video Patch Cord (see page 87) eturn Loss & DVJB-S eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 26 db or greater (~75 MHz) 2 db or greater (~2.4 GHz) 1 db or greater (~3. GHz) 26 db or greater (~75 MHz) 26 db or greater (~75 MHz) N/A 2 db or greater (~2.4 GHz) 2 db or greater (~1.5 GHz) 1 db or greater (~3. GHz) 1 db or greater (~3. GHz) 35 db or greater (~1.5 GHz) 2 db or greater (~3. GHz) 35 db or greater (~1.5 GHz) 2 db or greater (~3. GHz) Technical Note otary Switch Technology and Signal outing Chart At the heart of the video jack is an independently-developed rotary switch which has been specially designed for use with high frequency signals. It features dual-contact construction for improved contact stability. W Series () S Series (Straight Through) No Patch Signal thru as Arrowed Signal routes between top and bottom BNC without the use of Video plugs. No Patch Two independent single jacks in a Both Signal Terminated dual housing. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75 load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75 load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. Patch Upper Patch Lower Patch Both Lower Terminated Upper Terminated Signal thru as Arrowed Inserting a Video Patch Cord into front upper port automatically terminates signal path into the lower 75 load. Inserting a Video Patch Cord into front lower port automatically terminates signal path into the upper 75 load. Inserting Video Patch Cords into both front ports inputs and/or outputs signal. 7

2 75 Video Patchbays 75 Staggered Mid-size Video Patchbays 3G-ready mid-size video jacks allow for more efficient use of rack space. Panel Size Loaded Video Jacks 32MD-ST 1 U 32 x MDVJ-S 32MD-STS 1 U 32 x MDVJ-STS 32MD-ST-2U 2 U 32 x MDVJ-S 32MD-STS-2U 2 U 32 x MDVJ-STS 32MD-ST-4U 4 U 96 x MDVJ-S 32MD-STS-4U 4 U 96 x MDVJ-STS *Colors other than black are available on custom model basis except 4 U type (See page 75). 75 Staggered Mid-size Video Jacks MDVJ-S MDVJ-STS MVJ-DC Staggered Mid-size Video Jack, Staggered Mid-size Video Jack, Straight Through Dust cap for Mid-size video Jack (color: black 4 pcs) Key Features and Benefits 32 channels of I/O into 1 U or 2 U, 96 channels of I/O into 4 U. otary switch has been improved for superior isolation. Can be recessed mm (1 U, 2 U type). Wide designation strip (2 U, 4 U type). Lightweight aluminum alloy video jacks. Industry standard BNC plugs can be used. Note : Be sure to use with Mini-Weco video plug eturn Loss & MDVJ-S MDVJ-STS SMPTE ST 424 SMPTE ST 424 SMPTE ST Mini-Weco Video Patch Cord (see page 87) Patch Through (Long BNC port) eturn loss for MDVJ-S t MDVJ-S MADE IN CHINA OPENING THIS UNIT WILL VOID WAANTY 32MD-ST-4U Patch Through (Short BNC port) eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 26 db or greater (~75 MHz) 2 db or greater (~2.4 GHz) 1 db or greater (~3. GHz) 26 db or greater (~75 MHz) 26 db or greater (~75 MHz) N/A 2 db or greater (~2.4 GHz) 2 db or greater (~1.5 GHz) 1 db or greater (~3. GHz) 1 db or greater (~3. GHz) 32MD-STS db or greater (~1.5 GHz) 2 db or greater (~3. GHz) 35 db or greater (~1.5 GHz) 2 db or greater (~3. GHz) 15.9 Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 71

3 75 Video Patchbays 75 Staggered Video Patchbays The next-generation 12G-ready video patchbays with newly developed staggered dual video jacks. Staggered Video Patchbays Panel Size Loaded Video Jacks 32MCK-ST 1 U 32 x MCVJK-S 32MCK-STS 1 U 32 x MCVJK-STS 32MCK-ST Staggered Video Jacks MCVJK-S MCVJK-STS MCVJ-DC Straight Through Duct cap for MCVJ/MCVJK ( black, 1 pcs) Key Features and Benefits SMPTE ST compliant 32 channels of I/O into 1 U Staggered BNC rear jacks Dust-proof shutter Included a sheet of channel designator for easy identification. Can be recessed mm. Lightweight aluminum alloy video jacks Note : Be sure to use with Canare's unique Micro Video Plug (see page 74) Micro Video Patch Cord MCVPC** (see page 87) S11 SMPTE ST S11 SMPTE ST S11 SMPTE ST S Pacth Through (Long Through) Pacth Through (Short BNC port) eturn Loss for MCVJK-S eturn Loss & MCVJK-S MCVJK-STS eturn Loss BNC-BNC: BNC-VIDEO: Patch Through BNC-Self Termination 15 db or greater (~1.5 GHz) 1 db or greater (~3 GHz) 7 db or greater (~6 GHz) 4 db or greater (~12 GHz) 15 db or greater (~1.5 GHz) N/A 1 db or greater (~3 GHz) 7 db or greater (~6 GHz) 4 db or greater (~12 GHz) 45 db or greater (~6 GHz) 45 db or greater (~6 GHz) 72

4 Video Patchbays 75 Micro Video Patchbays Our unique, thinnest and lightest video jacks realize ultimate space efficiency. Micro Video Patchbays Panel Size Loaded Video Jacks 48MC 1 U 48 x MCVJ-W 48MCS 1 U 48 x MCVJ-S Micro Video Jacks MCVJ-W MCVJ-S MCVJ-DC Straight Through Duct cap for MCVJ/MCVJK (black, 1 pcs) Key Features and Benefits High density 48 channels of I/O into 1 U design. Video jack weights 35 g and is half of our conventional one. Space and weight saving; beneficial to O.B. vans DIN 1./ rear jacks. Dust-proof shutter Included a sheet of channel designator for easy identification. Can be recessed mm. SMPTE ST 424 compliant. Note : Be sure to use with our unique Micro Video Plug (see page 74). S eturn Loss for MCVJ-W Comparison of Canare Video Patchbays Micro Video Patch Cord MCVPC** (see page 87) S11 SMPTE ST 424 SMPTE ST S Pacth Through eturn Loss & L MCVJ-W MCVJ-S DIN-DIN: DIN-Video: Patch Through DIN-Self Termination 2 db or greater 2 db or greater 1 db or greater 45 db or greater 2xDV 32MD-STx 32MCK-STx 48MCx Application up to 3G-SDI up to 3G-SDI 12G-SDI up to 3G-SDI Channels 2, 24, Panel Option 1 U, 2 U 1 U, 2 U, 4 U 1 U 1 U Video Port Standard (W.E.) Mini-Weco Canare Micro Canare Micro Patch Cord VPC**-WC MVPC** MCVPC** MCVPC** ear BNC BNC or Slim BNC BNC or Slim BNC DIN 1./ MC 15 2 db or greater 2 db or greater 45 db or greater Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 73

5 Video Plugs Video Plug (W.E. Standard) Suitable Cable Boot Die Set VWP-C4A LV-61S, G-59B/U, Belden 8241, 8279, 241 CB4 TCD-451CA TCD-4CA Standard Package (2pcs) Gold-plated center contact resists deterioration over years of use. Solder center contact and crimp sleeve. VWP-C4A Be sure to use Canare Crimp Tool. VWP-C4A Mini-WECO Video Plug Suitable Cable Boot Die Set MVP-C4 LV-61S, G-59B/U, Belden 8241, 8279, 241 CB TCD-451CA TCD-4CA Standard Package (2pcs) MVP-C4 eturn loss: 26 db or greater (DC GHz), 2 db or greater (DC GHz). Gold-plated center contact resists deterioration over years of use. Solder center contact and crimp sleeve Be sure to use Canare Crimp Tool. MVP-C4 Micro Video Plug Suitable Cable Boot Die Set MCVP-CHW L-2.5CHWS TCD-D3F MVCP-CHW Standard package: 2 pcs Specifically designed for Canare MCVJ and MCVJK-ST jacks. eturn loss: 2 db or greater (DC - 3 GHz) 13 db or greater (DC - 6 GHz) 7 db or greater (DC - 12 GHz) Gold-plated crimp center contact. No solder needed to install. MVCP-CHW Be sure to use Canare Crimp Tool. Video Conversion Connectors BCJ-VWP BCJ-MVP BNC (female) - Video plug (W.E.Standard) BNC (female) - Mini-WECO Video plug BCJ-VWP Standard Package: BCJ-VWP (1 pcs), BCJ-MVP (1 pcs) Note: BCJ-MVP is recommended to use with Slim BNC plug. (see page 31) BCJ-MVP BCJ-VWP BCJ-MVP 74

6 S S 75 OPENING THIS UNIT WILL VOID WAANTY MADE IN CHINA 75 OPENING THIS UNIT WILL VOID WAANTY MADE IN CHINA 75 OPENING THIS UNIT WILL VOID WAANTY MADE IN CHINA Ordering Information Ordering Information 2DV (1U) Number of Video Jacks 2 2 pcs pcs pcs Circuit Type Blank S Straight Through Circuit Type Blank S Straight Through (126.8) (2.2) 4-7x1 Standard Video Patchbays 26 DV S - 5-2U Mid-size Video Patchbays 32 MD - ST S - 1-2U Note: 1) 4 U type is available in black color only 2) 4 U type can not be recessed. Designation Strip Dimensions 1 U: 426 mm x 6.2 mm 2 U: 42 mm x 18.4 mm 4 U: 4 mm x 13.2 mm 32MD-ST-2U (424) 12.7 ack Unit (height) Blank 1 U 2U 2 U Panel Color Blank Black 1 Brown 2 ed 3 Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White ack Unit (height) & Number of Video Jacks Blank 1 U, 32 Jacks 2U 2 U, 32 Jacks 4U 4 U, 96 Jacks Panel Color Blank Black 1 Brown 2 ed 3 Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White (126.8) (7.4) (7.4) (2.2) (13.3) x1(oval) 2 24DV (1U) x DV-2U (2U) (33.6) 4-7x1 (7.4) 16 32MD-ST 4-7x1 32MD-ST-4U (424) (13.5) MDVJ-S MDVJ-S MDVJ-S Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 75

7 Unloaded Video Jack Panels, S422 Patchbays Unloaded Video Jack Panels Panel Size VJ2-V2-1U-*** 1 U 2 ch (4 holes), for DVJB VJ2-V2-2U-*** 2 U 2 ch (4 holes), for DVJB VJ2-V24-1U-*** 1 U 24 ch (48 holes), for DVJB VJ2-V24-2U-*** 2 U 24 ch (48 holes), for DVJB VJ2-V26-1U-*** 1 U 26 ch (52 holes), for DVJB VJ2-V26-2U-*** 2 U 26 ch (52 holes), for DVJB MJ2-M32-1U-*** 1 U 32 ch (64 holes), for MDVJ MJ2-M32-2U-*** 2 U 32 ch (64 holes), for MDVJ VJ2-M32-4U 4 U 96 ch (3 x 32 ch, 192 holes), for MDVJ, Black MJ2-M32CK-1U-BLK 1 U 32 ch (32 slots), for MCVJK, Black *** : Please refer to the ordering information on the right. <Ordering Information> Panel Size 1U 2U 1 U 2 U Coding Ex. VJ2 - V2-2U - BLK Color Codes BLK Black BN Brown ED ed OG Orange YEL Yellow GN Green BLU Blue PPL Purple GY Gray WHT White (7.6) (2) VJ2-V24-1U-BLK x MJ2-M32-2U-BLK (33.6) (13.5) VJ2-M32-4U MJ2-M32CK-1U-BLK 4-7x1 S422 Patchbays Panel Size Connectors Front Panel ear Panel S-422-1U-16 1 U Bantam D sub 9P(F) 16 S-422-1U-24 1 U Bantam D sub 9P(F) 24 S-422-2U-32 2 U Bantam D sub 9P(F) 32 S-422-2U-48 2 U Bantam D sub 9P(F) 48 The S422 serial signal used for VT remote applications can now be switched with Bantam patchbay ease. D sub screws are M2.6 * Listed above items are other manufacturer s products. S-422-2U-48 BANTAM jack Dsub 9P(F) A A1 B B S-422-1U-24 S-422-2U-48 76

8 Connector Panels Pre-Loaded A/V Connector Panels Key Features and Benefits Isolated BNC, CA, F, XL on same panel Clear plastic cover, full screen desi-strip XL Connector Panels 161U-X12F 162U-X21 BNC Connector Panels 161U-JUK Type Panel Size Loaded Connector Panel P/N 1 U 2 U Dimensions (mm) 161U-X1F XL3-31F77 (16 pcs) x x U-X2F XL3-32F77 (16 pcs) x x U-AS1 161U-X12F XL3-31F77 (8 pcs, Left) XL3-32F77 (8 pcs, ight) x x U-B1 NC3FD-LX-B (16 pcs) x x U-AS1D 161U-B2 NC3MD-LX-B (16 pcs) x x U-X21 162U-X22 XJ3M-P3FA (16 pcs, Upper ow) XJ3F-P3MA (16 pcs, Lower ow) 2U-AS7.1 x x 217 XJ3M-P3FA (32 pcs, 2 rows) Type Panel Size Loaded Connector Panel P/N XL3 Panel Mount Adapters 1 U Front ear XJ3M-P3FA XL 3pin (M) XL 3pin (F) XJ3M-P3MA XL 3pin (M) XL 3pin (M) XJ3F-P3FA XL 3pin (F) XL 3pin (F) XJ3F-P3MA XL 3pin (F) XL 3pin (M) XJ3 series are XL3 full compatible. XL jack to jack extremely reduce installation hours ±.2 ±.5 23 ±.2 3 ± ±.2 Blank Panels 2.5 ±.3 (65.77) BP-DXF Easy and quick snap-on mounting without any tools Can be used for both ITT XL-F77 and Neutrik D holes Note: Panel thickness range: t 1.2 to t mm 1 Dimensions (mm) 161U-JUK BCJ-JUK (16 pcs) 1U-AS1 x x U-JUDB BCJ-JUDB (16 pcs) 1U-AS1D x x U 162U-JUK BCJ-JUK (32 pcs, 2 rows) 2U-AS7.1 x x ±.2 ±.5 23 ±.2 3 ± ±.2 Flange Type ITT XL-F ±.3 (59.4) Variety of panel options Most popular panel holes XL F-77 and Neutrik D available PUSH ±.2 ±.5 23 ±.2 3 ± ± ±.3 (75.87) BP-DXF XJ3F-P3MA XJ3M-P3MA ±.2 ±.5 23 ±.2 3 ± ±.2 BP-XF 2.5 ±.3 (69.3) XJ3M-P3FA XJ3M-P3MA XJ3F-P3FA XJ3F-P3MA BP-DXF (2 pcs) Snap-on blank panels for both ITT XL-F77/Neutrik D holes BP-XF (1 pcs) Blank panels for ITT XL-F77 hole with screws BP-D (1 pcs) Blank panels for Neutrik D hole with screws 77 Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies

9 Unloaded A/V Connector Panels Panel Type AS1 (D) AS3 (D) AS5 (D) AS7 (D) Variable panel Variable panel Flat panel Flat panel w/cable tie bar w/cable tie bar w/cable tie bar short type Long type 1U-AS1 (D) 1U-AS3 (D) 1U-AS5 (D) 1U-AS7 (D) 1 U 16 holes x 1 row Connector Panels Depth (mm) U-AS1 (D) 2U-AS3 (D) 2U-AS5 (D) 2U-AS7 (D) 2 U 16 holes x 2 rows Depth (mm) U-AS1 (D) 3U-AS3 (D) 3U-AS5 (D) 3U-AS7 (D) 3 U 16 holes x 3 rows Depth (mm) Panel Height, Number of holes and ows 1U 1 U, 16 holes, 1row 2U 2 U, 32 holes, 2rows 3U 3 U, 48 holes, 3rows Ordering Information 1U - AS3 D Hole Type Blank ITT XL-F77 Type D Neutrik D Type AS3 AS5 AS7 NOTE: Depending on their length, some connectors can not be mounted on the panel with a cable tie bar installed. Variable panel can be recessed mm. Panel Type AS1 Flat panel Flat panel w/cable tie bar Variable panel w/ cable tie bar - short depth Variable panel w/ cable tie bar - long depth elated Products M-MA1U2 M-MA2U2 M-MA3U2 DS1-AS4 1 U mounting brakets for a Variable panel, 2 pcs. (left and right) 2 U mounting brakets for a Variable panel, 2 pcs. (left and right) 3 U mounting brakets for a Variable panel, 2 pcs. (left and right) Designation strip for Canare A/V connector panels, 2 pcs. Examples of Custom-Made Connector Panels 1U-AS3 + XL3-31F U-AS7 + XL3-32F77 16 XL3-31F U-AS7 (box type) Connectors can be mounted on the both side. Connectors Canare Flush-mount BNC, F, CA and XL (ITT XL-F77 or Neutrik D type) are available. Options A) ear Panel A connector panel can be mounted on the rear. B) Box Type A connector panel, top plate and bottom plate can be mounted on the rear. C) ecessed Variable panel can be recessed mm by changing the screw positions of the mounting brackets and can be recessed either 5 mm or 75 mm by changing the mounting brackets to M-MA*U2. Options AS1 (D) AS3 (D) AS5 (D) AS7 (D) A) ear Panel N/A N/A Available Available B) Box Type N/A N/A N/A Available C) eccesed N/A N/A Available Available 78

10 Audio Patchbays Audio Patchbays The gold alloy cross bar contact, which features a low faulty contact rate, is used for the jacks. 481U patchbay can be recessed mm by changing the screw positions on the mounting brackets. Connector 481U-82AQ Bantam Patchbay 82AQ 96 Connector 48-12A/82AQ/EIA Bantam Patchbay 82AQ A/62A/EIA Skini Patchbay 62A A/32A/EIA Maxi Patchbay 32A 52 * Listed above items are other manufacturer s products. Audio Patchbays elated Products 32A 62A 82AQ ABJ-DC NP3TMC-B PH5-A PH5-B DS1-AS1 DS1-AS2 DS1-AS3 Maxi Jack Skini Jack Bantam Jack Bantam Jack Dust Cap (1 pcs/pkg) Maxi/Skini Plug Maxi/Skini/Video Patch Cord Holder Bantam Patch Cord Holder Designation Strip for Bantam (2 pcs.) Designation Strip for Skini (2 pcs.) Designation Strip for Maxi (2 pcs.) * Listed above items are other manufacturer s products. Technical Note <Wiring formats connecting upper and lower connectors> F: Full normal connection Output jack Input jack Upper row Lower row (Cross bar contact) Top view Full Normal Format (series) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is not connected to the lower jack. A signal can be entered by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. (Conventional from) Top view Bantam Jack 82AQ Skini Jack 62A Maxi Jack 32A Bantam patch panel 481U-82AQ Bantam patch panel 48-12A/82AQ/EIA 481U-82AQ 32-12A/62A/EIA Panel Hole Dimensions Panel Hole Dimensions Panel Hole Dimensions BC * M (See page 91 for patch cords.) 48-12A/82AQ/EIA 612A/32A/EIA Patch Cord Holder Capable up to 5 patch cords. Easy to install on the wall or side of rack. PH5-A for Maxi/Skini, Video cords. PH5-B for Bantam cords. Audio Patchbay Normalling s Output from a device is obtained from the upper row, while input to a device is normally connected to the lower row. Users can select from the following three types of connecting functions. H: Half normal connection Output jack Input jack Upper row Lower row ±.8 M2.5 or M2.6 (flat head) Half Normal Format (half-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. Signals are input by inserting a plug in the lower jack. In this case the signal is not connected to the upper jack. 6.4 ±.1 M3 (flat head) 7.9±.1 8.8±.8 M3 (round head) 9.5± ±.8 W: Double normal connection Output jack Input jack Upper row Lower row Double Normal Format (series-parallel) The upper (output) row is connected to the lower row (input) in the state when a plug is not inserted. When a plug is inserted in the upper jack to obtain a signal, the signal is connected to the lower jack. This format allows the signal to be obtained in parallel. The signal can be prevented from going to the lower jack by inserting a dummy plug. A signal can be entered by inserting another plug in the lower jack. Note that the signal in this case is connected to the upper jack. This can be prevented by inserting a dummy plug. Technical Trend Fiber-Optic Systems Connectors Cables Panels & Patchbays Mutichannel Systems Cable Assemblies 79

11 Audio Patchbays Wired Box Type Size Bantam Skini Maxi *481U-WB* can be recessed mm *9-62 connector is identical to ELCO V connector Connector Front ear 481U-WBF 1 U 82AQ U-WBH 1 U 82AQ U-WBW 1 U 82AQ U-WBS 1 U 82AQ WB-F 1 U 82AQ WB-H 1 U 82AQ WB-W 1 U 82AQ WB-F 1 U 62A WB-H 1 U 62A WB-W 1 U 62A WB-F 1 U 32A WB-H 1 U 32A WB-W 1 U 32A Bantam wired box 481U-WB* Bantam wired box 48WB-* Maxi wired box 26WB-* 9-62 Wired Panels Type Bantam Skini Panel 1 Panel 2 Size Connector Size Connector 48XP-F 1 U 82AQ 96 3 U 2 48XP-H 1 U 82AQ 96 3 U 2 48XP-W 1 U 82AQ 96 3 U 2 32XP-F 1 U 62A 64 4 U 32XP-H 1 U 62A 64 4 U XL3-31F77 48 XL3-32F77 48 XL3-31F77 48 XL3-32F77 48 XL3-31F77 48 XL3-32F77 48 XL3-31F77 32 XL3-32F77 32 XL3-31F77 32 XL3-32F77 32 XL3-31F XP-W 1 U 62A 64 4 U XL3-32F77 32 *Cables are 2 meters in length. Skini wired panel 32XP-* Normaling Options F: Full normal 481U-WB* H: Half normal 48WB-* W: Double normal 48XP-* S: Single (No normal) TC**B (See page 91 for patch cords) 9-62 Connector Format (Wired box) <ear panel> Bantam Lower row ~48 ch Upper row ~48 ch Lower row 1~24 ch Upper row 1~24 ch Skini Lower row 17~32 ch Upper row 17~32 ch Lower row 1~16 ch Upper row 1~16 ch Maxi Lower row 14~26 ch Upper row 14~26 ch Lower row 1~13 ch Upper row 1~13 ch 9-62 connector is mated with 9-68 connector requires either 1 or 5 contact and 9-T cover for assembling. <Wired box side> <Cable side> ( V) ( V) 1 : Solder type ( ) Contact 5 : Crimp type ( ) Cover 9-T : Top entrance ( T) *The numbers in parentheses are ELCO ordering codes. ** Contact extraction tool: Crimping pliers for 5: (AWG #18), (AWG #2-#22), (AWG #24-#26). Wiring Table for 9-62 Channel no. Maxi Skini Bantam SHIELD A H B J S C K T D L U E M V F N W X AE AM Y AF AN Z AH AP AA AJ A AB AK AS AC AL AT BJ BS BY BK BT BZ BL BU CA BM BV CB BN BW CC BP BX CD CF CN CW 2 CH CP CX CJ C CY CK CS CZ CL CT DA CM CU DB 8