MU Type Fiber Optic Connectors
|
|
|
- Ethan Haynes
- 6 years ago
- Views:
Transcription
1 Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MU Type Fiber Optic Connectors HMU Series Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with JIS C 5983 (F14 type fiber optic connectors) and IEC MU intermate test by NTT certified connector. 2. Flame resistant Satisfies flammability rating UL94V-0 3. Backplane MU Backplane connector has a self-holding mechanism which does not transfer any force on the back panel when both side of connector assemblies are fully connected. Back panel side connectors can be removed or inserted even both sides are mated. 4. Wide Variety of adapter type Type Number of Fiber connections Back panel side Single Duplex 4 way 8 way 16 way Board Mounting Snap-in Panel Mounting & Screw Panel Mounting (Only Snap-in) Package side 5. Simplified plugs and Receptacles Extremely small size (only 13.75mm Plug length). MU simplified plug is designed for equipments inside connection. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 39
2 Product Specifications Ratings Operating temperature range -25 C to +70 C Storage temperature range -25 C to +70 C SC FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Terminators Optical Characteristics Mechanical Characteristics Item Test Method (IEC 61300) Specifi cations POF/ PCF al Characteristics Insertion Loss Return Loss Engagement and Separation forces SM Wavelength 1310nm (LD) 0.5dB max. (AdPC) MM(GI) Wavelength 1310nm (LED) 0.3dB max. (PC) SM MM(GI) Ferrule with drawal force Cable retention (Straight pull) Durability (cycles, mating/un-mating) Vibration Shock Humidity (Temperature/ humidity- cycles) Wavelength 1310nm (LD) Measured with corresponding connector. Extract zirconia gauge ± mm diameter from split sleeve. 70N tensile loads for one minute. 200 times (Backplane) 500 times (Plug) Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 981 m/s 2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. -10 C to 65 C, humidity: 90% to 96% 10 cycles 40dB min.(adpc) 22dB min.(pc) Simplex plug Duplex plug Engagement force: 20 N max. Separation force: 20 N max. Engagement force: 30 N max. Separation force: 30 N max. Copper alloy split sleeve 1N to 3N Zirconia split sleeve 1N to 2.5N 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. Change of temperature -25 C to +70 C 100 cycles Dry heat 960 hours at 85 C Cold 960 hours at -25 C Salt mist 48 hours in a 5% concentration of salt mist No signifi cant corrosion. Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing Adapter metal fittings Simplifi ed receptacle housing Simplified plug Backplane connector housing Split sleeve Dust cap Material Synthetic resin Steel Zirconia Synthetic resin Stainless steel or copper alloy (Nickel plating) Synthetic resin Zirconia Synthetic resin Zirconia or copper alloy Synthetic resin 40
3 Function diagram Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Duplex plug HMUA-2P2-H1 or HMUA-2P2-H2 and HMUA-F3-A*** Dust cap HMUB-DP-1 Duplex backpanel side HMUB-L2HA-1 or HMUB-L2HB-1 Terminator HMUA-TM-P2 Simplex plug HMUA-P2-H1 or HMUA-P2-H2 and HMUA-F3-A*** Back panel Thickness: 2.4mm or 3.2mm 8-position Backpanel side HMUB-L8HA-1 or HMUB-L8HB-1 Package Sleeve holder Duplex package side Simplex J plug HMUB-SH-1 HMUB-L2PA-1 HMUAJ-P1-H1 or HMUAJ-P1-H2 and HMUA-F3-A*** 8-position package side HMUB-L8PA-1 Simplex plug HMUAJ-P2-H1 or HMUAJ-P2-H2 and HMUA-F3-A*** Terminator HMUAJ-TM-P2 41
4 Ferrules POF/ PCF Terminators SC FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Part Number CL No. A dimension Applicable Fiber cable HMUA-F3-A125(10) HMUA-F3-A1255(10) HMUA-F3-A126(10) SM-9.5/125 GI-50/125 42
5 Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Plug Housings Simplex Plug Housing for 2mm cable Simplex Plug Housing for 0.9mm fiber Duplex Plug Housing for 2mm cable Duplex Plug Housing for 0.9mm fiber JAPAN 48.5 Part Number CL No. Boot color HMUA-P2-H1(61) Blue HMUA-P2-H2(61) Light purple Part Number CL No. Boot color HMUA-P0.9-H1(60) Blue HMUA-P0.9-H2(60) Light purple 48.5 Part Number CL No. Boot color HMUA-2P2-H1(61) Blue HMUA-2P2-H2(61) Light purple Part Number CL No. Boot color HMUA-2P0.9-H1(60) Blue HMUA-2P0.9-H2(60) Light purple JAPAN 43
6 Simplex J Plug Housing for 0.9mm fiber SC FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Notes : This connector is the product for MU backplane solution, and is plugged into Package side Connector Housing with Sleeve Holder. But can't mate with standard MU adapter. POF/ PCF Terminators 4.75 Part Number CL No. Boot color HMUAJ-P0.9-H1(60) Blue HMUAJ-P0.9-H2(60) Light purple Notes : Option for this products Sleeve for temporary mating Part Number : HMUA-RH-1 CL No. : CL Available to mate with standard adapter. (Usage example : Optical measurement) 44
7 Adapters Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Simplex Adapter / Snap-in Panel Mounting Simplex Adapter / Screw Panel Mounting Simplex Adapter / Board Mounting HMUA-A Zirconia HMUA-AS Zirconia Board Mounting Pattern HMUA-AH-3(40) Zirconia 45
8 Duplex adapter / Snap-in Panel Mounting SC FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Terminators Duplex Adapter / Screw Panel Mounting Duplex Adapter / Board Mounting HMUA-2A Zirconia HMUA-2AS Zirconia Board Mounting Pattern POF/ PCF HMUA-2AH-4(40) Zirconia 46
9 Duplex Adapter / Snap-in Panel Mounting 6.25mm Type Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HMUA-2AK Zirconia Notes : Available to 6.25mm pitch MU-PJ attenuators. The outer dimension (and panel cutout) is same as the above HMUA-2A-4". 47
10 HMU Series MU Type Fiber Optic Connectors 8-Position Adapter / Snap-in Panel Mounting SC FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. 8-Position Adapter / Screw Panel Mounting 8-Position Adapter / Board Mounting HMUA-8A Zirconia HMUA-8AS Zirconia Terminators BBoard Mounting Pattern POF/ PCF HMUA-8AH-3(40) Zirconia 48
11 Cost effective adapters 8-Position Adapter / Screw Panel Mounting 16-Position Adapter / Screw Panel Mounting Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HMUA-8A-2(40) Zirconia HMUA-8A-B Copper alloy HMUA-16A Zirconia HMUA-16A-B2(40) Copper alloy 49
12 SC Angled Adapters Special design for angled mount.(the installation angle is 40 degrees. ) Duplex Angled Adapter / Snap-in Panel Mounting FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. 4-Position Angled Adapter / Snap-in Panel Mounting Mounting Angle HMUA-2A-40A Zirconia 40 POF/ PCF Terminators Mounting Angle HMUA-4A Zirconia 40 50
13 Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Duplex Angled Adapter with Shutter / Snap-in Panel Mounting Panel Cutout dimensions Only the angled adapter without shutter. Fiber Position Panel cutout:xmm 06(Duplex+4 position) (4 position 2) (Duplex+4 position 2) (4 position 3) (Duplex+4 position 3) (4 position 4) (Duplex+4 position 4) (4 position 5) Usage Example Mounting Angle HMUA-2A-40A-4-S Zirconia 40 Note: 1) Under no circumstances look into the inside of shutter when the laser device is operational. The laser radiation is not visible to the human eye, but it can seriously damage your eyesight. 2)Please indicate the necessary safety labels when using high power light source. 51
14 Backpanel side Connector Housings SC Duplex Backpanel side Connector Housing FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. 8-Position Backpanel side Connector Housing POF/ PCF Terminators Part Number CL No. Panel thickness HMUB-L2HA-1(40) mm HMUB-L2HB-1(40) mm Note: Screw fastening torque: Nm Part Number CL No. Panel thickness HA-1(40) mm HMUB-L8HB-1(40) mm Note: Screw fastening torque: Nm 52
15 Package side Connector Housings Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Duplex Package side Connector Housing Part Number CL No. HMUB-L2PA-1(40) Note : Screw fastening torque : 0.08Nm 8-Position Package side Connector Housing Part Number CL No. HMUB-L8PA-1(40) Note : Screw fastening torque : 0.08Nm Sleeve Holder HMUB-SH-1(40) Zirconia Board Mounting Pattern Note: This Sleeve Holder should be used for duplex and 8-position package side connector housing and J Plug Housing connector plug. Insert the Sleeve Holder using dedicated tool #HMUB-TS-1. The gold plated section of the Sleeve Holder should be inserted into the package side connector housing. Board Mounting Pattern 53
16 Simplified Receptacles SC Simplex Simplified Receptacle / Screw Panel Mounting FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Terminators POF/ PCF position Simplified Receptacle / Screw Panel Mounting HMUA-SR-1(40) Zirconia HMUA-SR-B Copper alloy 2-Ø2.3 2-Ø or M ±0.1 HMUA-10SR Zirconia HMUA-10SR-B Copper alloy t=1.6 54
17 F D B F D B HMU Series MU Type Fiber Optic Connectors 8-position Simplified Receptacle - for extremely high density applications Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 16-Position Simplified Receptacle - for extremely high density applications Mounting Example HMUA-8SR-3(40) Zirconia HMUA-8SR-B3(40) Copper alloy Please contact to HIROSE for the mounting dimension. HMUA-16SR Zirconia HMUA-16SR-B Copper alloy Please contact to HIROSE for the mounting dimension. a
18 SC Simplified Plug Simplex simplified Plug for 0.9mm fiber FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Split Sleeve Zirconia Copper alloy Extraction Tool for Simplified Plug Part Number CL No. A dimension Applicable Fiber cable Ferrule HMUA-FK-A125(04) HMUA-FK-A1255(04) SM-9.5/125 GI-50/125 Zirconia HMUA-FK-A126(04) HMUA-D Zirconia HMUA-SLIT-SLEEVE(01) Copper alloy Terminators POF/ PCF Part Number CL No. HMUA-FK-T
19 Dust Caps Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Dust Cap for Backpanel side connector housings Dust Cap for Adapters Part Number CL No. Applicable connector HMUB-DP-1(40) Back panel side housing Part Number CL No. Applicable connector HMUA-DP Adapter, simplifi ed receptacle
20 SC Tools Insertion / Extraction Tool for Plug FC Jun Attenuators Copyright 2018 HIROSE ELECTRIC CO., LTD. MU All Rights Reserved. Terminators Insertion / Extraction Tool for Plug Extraction Tool for J Plug Insertion / Extraction Tool for Sleeve Holder Part Number CL No. Color of Tip Remarks HMUA-TP Blue For Conventional Adapters HMUB-TP Brown For MU Backplane system Cost effective type Part Number CL No. Remarks HMU/HEMD-1P For Conventional Adapters and MU Backplane system Part Number CL No. Remarks HMUB-TJ HMUB-L2PA-1, L8PA-1 POF/ PCF Part Number CL No. Remarks HMUB-TS HMUB-L2PA-1,L8PA-1 58
21 Powered by TCPDF ( HMU Series MU Type Fiber Optic Connectors Crimp Tools Jun Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Stop Ring Insertion Tool Part Number CL No. Applicable plug housing HT402/HMUA-P2-H HMUA-P2-H2,H1 HMUA-2P2-H2,H1 Part Number CL No. Applicable connector HMUA.J/PRMD MU plug housings except HMUA-P1.1-H2 59
MU Type Fiber Optic Connectors
MU Type Fiber Optic Connectors HMU Series Back panel side Package side Features. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and
MU Type Fiber Optic Connectors
Type Fiber Optic Connectors Features H Series Back panel side. JIS, IEC standard compliant and intermateability test certified. Comply with JIS C 98 (F4 type fiber optic connectors) and IEC 64-6. intermate
FC Type Fiber Optic Connectors
Type Fiber Optic Connectors HR Series Features 1. JIS, IEC standard compliant and intermateability test certified. Comply with IEC 61754-13 and JIS C 5970(type F01). intermate test by NTT certified connector.
SC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors SC HSC Series FC Jan.1.2018 Attenuators Copyright 2018 HIROSE Environment ELECTRIC CO., LTD. MU All Rights Reserved. Features 1. IEC, JIS standard compliant and intermateability
FC Type Fiber Optic Connectors
FC Type Fiber Optic Connectors HRFC Series MU SC FC Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 597 (F1 type fiber optic connectors). IEC 61754-13
SC Type Fiber Optic Connectors
SC Type Fiber Optic Connectors HSC Series MU SC FC Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F04 type fiber optic connectors) IEC 61754-4 2. Plugs
SC Type Fiber Optic Connectors
Type Fiber Optic Connectors H Series Attenuators POF / PCF Terminators Features 1. IEC, JIS standard compliant and intermateability test certified. Comply with IEC 61754-4 and JIS C 573(F4). intermate
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2000 Simplex PC/APC MULTIMODE PC Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS F-3 Simplex PC/APC MULTIMODE PC Telecommunications and Fiber Optics are developing at an incredible speed. To keep up with tomorrow s requirements
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
DIAMOND Fiber Optic Components
DIAMOND Optic Components NETWORK ACCESSORIES Attenuators Family PC/APC MULTIMODE PC DESCRIPTION Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
SPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
Connector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
Ultra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
LX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility
Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
METRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET
METRIC MIL-C-83522/16B 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
Our Most Important Connection is with You. OSIS SECTION 7. OSIS Series
SECTION 7 OSIS OSIS Series Contents Introduction : One Step Interconnect Solution...7-3 Applications...7-3 International Standard Documents Compliance...7-3 Features and Benefits...7-3 Characteristics
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
OSIS by Radiall One Step Interconnection Solution
FIBER OPTIC AND MULTISIGNAL APPLICATIONS OSIS by Radiall One Step Interconnection Solution Introduction The easiest outdoor interconnection solution: in only one click! To meet the requirements of telecommunication
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS E-2 Backplane PC/APC MULTIMODE PC Enthusiastic customers using the E-2 TM connector system on their equipment encouraged the development of
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER FERRULE, EPOXY
METRIC MIL-DTL-83522/16C 28 June 2013 SUPERSEDING MIL-C-83522/16B 11 May 1995 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components E-2 Compact & Duplex CABLE ASSEMBLIES AND ADAPTES SINGLE MODE PC/APC MULTIMODE PC The E-2 COMPACT and DUPLEX combine the optical and mechanical performances of the E-2 simplex
CONTENTS. Introduction Characteristics Product range. Pages
R2CT TM Series R2CT CONTENTS R2CT TM Pages Introduction... 9-4 Characteristics...9-5 Product range R2CT TM standard plug kit...9-6 R2CT TM mini short plug kit... 9-7 R2CT TM standard receptacle...9-8 R2CT
SMU-P Series Single mode MU CONNECTOR PLUG
DOCUMENT NUMBER S05-H042-01E Single mode MU CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
A Division of Castle Microwave. Fibre Products.
A Division of Castle Microwave Fibre Products www.castlemicrowave.com www.castlecables.co.uk Interconnect Products Global No 1 supplier in quantity for LC Product. Standard Connectors & Adapters Small
LC Connectors and Adapters
, Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements
0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
SMU-C2 Series MU HOUSING - for ø 2 mm cord -
DOCUMENT NUMBER S05-H079-01E MU HOUSING - for ø 2 mm cord - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
Introduction to optical fibers and their applications
Introduction to optical fibers and their applications Felix Donkers Oct, 2008 (draft v0.1) Outline Introduction Optical fibers, patch cords and cables Optical fiber termination and alignment Application
Subminiature, Waterproof Duplex Fiber Optic Connectors
Subminiature, Waterproof Duplex Fiber Optic Connectors MF10B Series Waterproof 2pos. Bayonet lock Highly reliable bayonet lock. When mating Sleeve Plug pin Simply by turning around the sleeve, the taper
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
SSC-PE Series Single mode SC CONNECTOR PLUG
DOCUMENT NUMBER S05-H048-02E Single mode SC CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
EC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
minisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height
NEW Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series Connector mated condition 0.94 1.0MAX X.FL-LP-040 X.FL-LP-03 09 X.FL-LP P -068 1. 1.3MAX 0.89
Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue
One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card
LC Connectors. Fiber Optic Products Catalog. One-Piece LC Connector Product Facts
44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW Engineered by Imagination Suncall Corporation was established in 1943 based on the principles of emphasizing function and precision. We strive to continually
FIBER OPTIC CONNECTORS AND ADAPTERS
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCT CATALOG Engineered by Imagination Suncall America provides advanced fiber optic connectors, adapters and accessories customized for any application. We re focused
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
![2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)](/thumbs/96/127052325.jpg "2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)")
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
C o n n e c t o r s C h a p t e r 183
Connectors Chapter 5 183 Connectors Contents Copper RJ45 FAMILY 700A8 185 LC FAMILY LC Connectors 186 LazrSPEED 189 LC Couplings 190 SC FAMILY SC Connectors 191 SC Connector Clip 192 SC Couplings 193 ST
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: Fax:
259 Yorktown Road, College Town, Berkshire, GU47 0RT Tel: 01276 600200 Email: info@nfi.uk.com Fax: 01276 600161 NFI UK LTD NFI UK Harsh Environment Fibre Optic Connectors NFI UK harsh environment connectors
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330
Product information 19" 1U UniRack2 24xLC-Duplex G.652.D, PC, ceramic, C/2 R819330 1 Pcs. 19" 1U slide-in unit, splice tray plate with 2 splice trays radius 40 mm, fastening material, labeling strips and
LC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
Fiber optic Components Product Catalog 2018
Fiber optic Components Product Catalog 2018 Your R&M benefits: At the a basis glance. for development. «The security of knowing that R&M will still be around in 10 years is a good feeling.» With R&M,
Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height
NEW Features Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series 1. A Low mated height of 0.94 or 1. mm (maximum of 1.0 or 1.3 mm) When connected this
F-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution
F-LINK Inter-Connect Solution PRELIMINARY Overview Optical Cable Corporation (OCC ) introduces the F-LINK Inter-Connect platform, which is simply the most remarkable connector system ever conceived. Born