The detailed instruction please download at

Size: px

Start display at page:

Download "The detailed instruction please download at"

Myra Carson
5 years ago
Views:

1 L57 Instruction

2 The detailed instruction please download at Any questions,get support from, or Thank you! 1

3 KeysSchematic Pre./ REW Screen Next/FF Vol+ REC Vol- Earphone Play/ Pause USB Hole ON/OFF switch STOP /SAVE Mode(Menu) Speaker Built-in MIC 2

4 Catalog 1.Turn on 2.Turn off 3. Record 4. Record settings 5. Play 6. Play setting 7. Delete 8. System setting 9. Device Storage 10.Technique Parameter 3

5 1.Turn on: Push the "ON/OFF" 1 switch to "ON"(As figure A);If Power switch already at ON position, Long press2 key,then goes to Play Interface(As figure B ) The Fame.mp3 1 2 A B 4

6 2.Turn off: Long press the 1 for 3 seconds,the screen will shows "GOODBYE!"(As figure B),the device is turned off. Push the "ON/OFF"2 switch to "OFF",the voice recorder will cut off the power. The Fame.mp3 1 2 A 5 B

7 3.Recording: (1) Turn on the device,short press the 1"REC" button begin recording. The screen wills shows the recording timing running and the LED light will be flashing(as figure A). (2)The device in the recording state,short press the "PLAY"1 button to pause recording;short press the "PLAY "1 button again to continue recording. (3)Short press the "STOP" button to end recording,the screen will shows "Saved!". (As figure B). 6

8 2 Saved A B Note:The recorded file will named with the date you recorded such as wav 7

9 4.Record settings: 1. Record Quality Setting In the status of stop recording (not pause), short-press the 1 M button to enter the MENU OPTION first, and then press the2 or Select Record Setting (As figure A) Press 3 M enter it, and select Record Quality (As figure B) Press 3 M enter it, and select the recording quality you like such as 32kpbs or 384kpbs And press M, confirm your selection (As figure C). 8

10 menu menu menu Local folder Record quality 192K BPS 2 384K BPS record seting rec light setting mic sensitivity A B C 2. Recording Indicator Light: in the status of stop recording; short press1 M enter Menu Setting and then press 2 or select Record Setting (As figure A) Press 3 M enter it,select rec light, press 3 M enter it(as figure B), Select close or open and then press 4 M 9

11 confirm your selection ( As figure C) Now the recording indicator will ON/OFF as the setting menu Local folder record seting setting 2 menu Record quality rec light mic sensitivity menu closelity openg A B C 3.MIC Sensitivity select:in the status of pause or stop recording; short press1 M enter MENU and then press 2 or select record setting (As figure A) Press 3 M enter it,select MIC sensitivity and then press 3 M again enter it (As figure B) 10

12 Press 4 or select from 0-7 level, and then press 5 M confirm your selection(the higher level, it records longer distance but more noise; the lower level, it records shorter distance, but less noise; you could plug your headphone and monitor your recording effect) menu Local folder record seting setting 2 menu Record quality rec light mic sensitivity A B C 11

13 4.Recording LCD display No Recording mode Name 1 Battery Icon 2 Current recordings file name 3 Current File Bit Rate 4 Current File Format 5 Remaining Space Time 6 Current Recording Time 7 Current recordings file name 8 REC/Play/Pause State Display 9 Current File Sequence 10 Total Number of Files 5.Playback: 12

14 In recordings file or music mode,press 1 playing,and press 1 again, pause play(as figure A); In the status of playing, press 2 or switch to next/previous track(as figure B); At standby or pause status,press 3 it could switch between recording and music mode,at the stop or pause status,press 4 it will start to play currently file(as figure C) The Fame.mp3 The Fame.mp3 2 The Fame.mp A B C 13

15 Playing LCD display /0010 The Fame.mp3 A MP3 Music mode No Name 1 Battery icon 2 Current music file name 3 Current Repeat Mode 4 Current File Bit Rate 5 Current File Format 6 Current File Total-Time 7 Current File Play Time 8 Current music file name 9 Play/Pause State Display 10 Current File Sequence 11 Total Number of Files

16 6. Playback Setting: A-B repeat Function:In the playing status, long press 1 M,set start point A, (As figure A) And now the screen will display 2 B and flash,and then long press 3 M again,it will set the end repeat end point B (As figure B) Now the screen will display 4 A-B and stop flash,the device will repeat playing between A and B,and press 5 M again, cancel A-B repeat (As figure C) 15

17 The Fame.mp3 The Fame.mp3 The Fame.mp3 A- A-B A B C 7. Delete: At the status of stop, long press 1 M enter delete menu(as figure A) Screen will display Delete file, Delete all, Exit Press 2 or select it; press 3 M again, confirm selection and delete file(the 16

18 more file you delete, the long time it needs,do not shut down the device during delete file or it will cause damage to files in the recorder) (as figure B) Cancel DELETE, press4 cancel it, and return the main interface(as figure B) The Fame.mp3 menu Delete file Delete all Exit A B 17

19 8. System Setting: System Time: Once set, the time will be remember; When the battery is exhausted, it will reset to default time, you will to set date and time again Backlight: the display backlight could be set at :0-30 seconds. Language: the device built-in multiple language, English, German, French, Italian, Spanish, Japanese etc. Format Device: entering format device, Press REW or FF select OK or Cancel ; If you need format the device, select ok, and press MENU,confirm it, device will be format If NOT, select Cancel, or Press STOP cancel it 18

20 NOTE: format device, it will erase all data on the device, Please backup! Factory Settings: select factory settings, Press MENU enter it, Press REW or FF, select Ok or Cancel Select ok, and press MENU, confirm selection, device will restore factory settings Press STOP or select Cancel to cancel it 9.Device Storage : (8GB) WAV Format 384Kbps 32Kbps Storage Time 2760Mins 33600Mins 10. Technique Parameter Dimension 101X27X10.8MM Display LCD Display (96*64, negative) USB USB 2.0 High Speed 19

21 Memory Battery 8GB Memory 8GB 3.7V/230MAH Polymer Battery PCM Pulse Code Modulation for about 46.5 hours Music MP3 WMA 8KHz 48KHz 8Kbps 320Kbps 32KHz 48KHz 48Kbps 192Kbps Record PCM 384Kbps HQ 192Kbps SP Standard LP Long Time 128Kbps 32Kbps, 64 Kbps Earphone Output Max. Out FR 10Mw +10mW(32Ohm) 20Hz~20KHz 20

22 SNR >80dB Dist 0.05% Temperatur -5 to 40 Supported System Windows 98 Second Edition/ Millennium Edition/2000/XP/ Windows 7 The manual content is subject to its newest version; It is sorry, we cannot notice it. Trouble Shooting Guide 1)No Recordings If there is no recordings, or you have deleted all recordings in your voice recorder, when you open your voice recorder, you will see no recordings or NOT RECORD on the screen. Don t worry, you could just go ahead to press REC or M (menu) or STOP to switch to Music folder as your wish 21

23 2)Format Error Format Error, this usually happens from 2 aspect: A.During recording, directly push down the POWER BUTTON to OFF position, that will cause file damage, before switch off your voice recorder, you need to press STOP save the recordings first B.Computer do not support the.wav file. The recordings were saved as.wav format. For WINDOWS 10 or MAC user may encounter with this issue. Don t worry You could download the free VLC Media Player to solve this issue 3)How to connect to computer Use the attached cable connect to your computer, or your android phone cable If you failed connect it to your computer, you could contact us, support@evistr.com we will 22

24 help you solve it, or you could do some trouble shooting, according our next chapter said Or you could go to the simple way, just change a new socket or new cable. Because this issue usually happens like you failed connect your flash drive to your computer, they are the same issues. 4)Cannot find my recordings in the recorder This mainly because when you open the voice recorder, it reads the MUSIC folder, you could long press STOP switch back to music folder Or you could connect it to your computer to check whether there is recordings in your recorder 5)How to open voice activated function Go to system setting, find record setting, enter it, select AVR mode, open AVR mode, and press M confirm it. 23

25 Now press REC, you will see VOR on the screen, it means you have successfully set voice activated recording function 6)Press REC, it not recording First check, the recording light blink or not Second, can you see VOR on the screen If so, it means you have open the voice activated recording function, during this setting, it will only records when high enough decibels sound detected, you could go to record setting, find AVR sensitivity, and adjust it. It helps But we suggest you could close the AVR mode, if you do not want this function 7)Why it is only playing 16 seconds each recordings / music This is because you enter Intro playback mode, it 24

26 will playback 16 seconds of each file At the status of playback, you could press M (menu), find Repeat, enter it Select Repeat All or other mode, press M (menu), confirm your setting NOTE: it must during playing, press M (MENU), then you could enter playback setting 8)Why it playback in random Same way to solve this issues as issue 7 9)How to use the A-B repeat function During playback, long press M, you will see A on the screen, and B is blink, it selected the start point Long press M again, select point B Now it will playback between Point A to B 25

27 10)The recording is noise Don t recording near computer, electric fans, air conditioner, sound bar that will easily cause noise, the recorder will pickup this statics noise 11)It suddenly shows delete file At the status of stop recording or playing, when you long press M (menu), it will enter delete mode. So when you see this information, you should be mistakenly enter delete mode, press FF/REW to select exit, or don t do any operation, it will return back to normal screen. If you selected YES, and press M, all your files will be deleted! Be ware of this. 12)Screen shows NOT RECORD! I could do nothing When you see this, it is because you have deleted all recordings in your recorder. So it will 26

28 shows NOT RECORD! At this moment, you just need to press REC, to record a new recording, that will be OK, at this status, many buttons will not work, it is normal, because no file. 13) Space is full When space is full, you could connect to your computer, and copy out your recordings, and save it to your computer, and then delete all the recordings in your voice recorder. The voice recorder has a limited storage at 8GB, so after a while of using, it may be full of storage, you need to back up it on your computer We will regular update our E-book, based on our customer feedback. We hope to get more interaction from your side, and let us know more we could do, you could visit more of this information from our website: 27

Happy Recording with Your TOOBOM Voice Recorder

Happy Recording with Your TOOBOM Voice Recorder Enjoy Recording, No cumbersome recorder Simple Tutorials, Happy recording Still have unexpected issues with the voice recorder? No worry. Phone support at your available time REQUEST PHONE CALL or CUSTOM