WORLD LEADING PRODUCTS FOR LASER SCIENTISTS AND ENGINEERS

Transcription

1 2 Output TEC Controller, 128 Watts Each Output, Optimized for Laser & Non-Linear Crystal Temperature Control High Stability Temperature Controller for Laser Diodes and Crystals 2 x ±16.00 Volt, ±8.00 Amp TEC / Peltier Controller Outputs 2 x Temperature Sensor Inputs RS-232 or USB with Control Software and LabView Drivers Ultra-Small Footprint: 105mm x 44mm x 164mm TEC-150 DATA SHEET WORLD LEADING PRODUCTS FOR LASER SCIENTISTS AND ENGINEERS

2 DATA SHEET TEC-150 Product Overview: These dual output high power laser diode TEC controllers provide precise, simultaneous control of two Peltier coolers with independent fully programmable PID control loops. They are designed to deliver milli-degree temperature control stability from two separate 8 volt, 16 amp bipolar DC current outputs. One output and temperature sensor is typically used for the laser diode cooler and the second output is used to control the temperature of a crystal. Each output has it s own feedback from a temperature sensor input. These units include a simple to use graphical user interface software suite, LabView drivers, and a command set of terminal programming tools which can be accessed through the RS-232 or USB remote interface. High Speed Precision PID TEC Control Loop for Fast Temperature Settling and Milli-Degree Stability: The TEC-150 Peltier element controllers come with standard PID control loop settings which are preset for optimal control of typical laser diode thermal loads. The proportional variable (gain) can be set using a simple linear scale of gain constants. In order to simplify setup and programming, the commands are deprecated with L for laser and C for crystal, respectively. Simple GUI Interface and Powerful Programming Tools: All TEC control parameters and all monitoring functions are accessible through the RS-232 or USB interfaces. The graphical user interface offers a simple dashboard for laboratory and R&D environments, while the terminal software tools suite provide fast integration of the TEC-150 into laser systems or manufacturing applications.

3 TEC-150 SPECIFICATIONS 2 X TEC CONTROLLER (PELTIER) OUTPUTS 2 x TEC Output Current Range (bipolar): ± 8.00 Amps (each) 2 x TEC Output Voltage Range (bipolar) : ± Volts (each) TEC Control Loop Algorithm: Full P.I.D. Peltier Controller P.I.D. Variables: User Adjustable (ships with factory pre-set variables) Temperature Control Stability (8 25 C) : C Temperature Range: -25 C to 150 C TEC Setpoint Resolution: 0.01 C Laser Diode Temperature Protection: User Set Upper and Lower Temperature Limits Peltier Element Protection: User Set Current Limit Hardware Design Topology: H-Bridge, Bipolar 2 X TEMPERATURE SENSOR INPUTS Thermistor: All 2 Wire NTC Types: IC Temperature Sensors: Thermocouple: 10 kω Thermistors: Thermocouple: K-Type 10 kω, 100 kω PT100, PT1000 K-Type USER INTERFACE RS232 Standard LabView Drivers Included Control Software Included USB Optional: LabView Drivers Included Control Software Included $95.00 (Option SVC-USB) INPUT POWER SUPPLY AND DIMENSIONS Required Power Supply Input: +24 VDC Dimensions: Input Voltage Connector: 44mm x 105mm x 164mm 9 Pin D-Sub CONNECTORS Peltier: Power Supply Input: Sub-D 15 pin, Female Sub-D 9 pin, male

4 DATA SHEET

5 Product Warranty: In addition to the standard full one year waranty, this product is offered with an additional 3 months of extended warranty for a total of 15 months of waranty coverage. The warranty includes all parts and labor. The warranty does not include customer induced product damage. Our Customer Commitment: You Get Direct, Fast Tech-Support from a Product ENGINEER... Not a Sales Person You get DIRECT access to the correct factory engineer for your product. We eliminate the sales person middle-man back and forth time delays resolving technical issues. No more Contact Us forms. Every product has an assigned engineer in our auto-messaging data base to give you direct, immediate access to the correct tech-support info. You Get an Extended Warranty All products from come with a 12 month factory warranty. Additionally, we offer and extra 3 months of warranty on top of the standard warranty. Warranty does not include customer induced product damage. You Get the Lowest Factory-Direct Prices Worldwide All of our 3rd party global suppliers set & quote their own direct pricing. There are NO Mark-Up s. You get their lowest direct price.