FACE006 Series. Facial & Proximity, Smart Card Reader

Size: px

Start display at page:

Download "FACE006 Series. Facial & Proximity, Smart Card Reader"

Alisha Morton
5 years ago
Views:

Facial & Proximity, Smart Card Reader FACE006 Series Key Features Face Recognition and Proximity Reader Store up to 10,000 Facial Templates RF only, RF+Face, RF+P/W+Face, PIN+Face mode Fast

256ch), TCP/IP, USB Port External reader port to work with existing 26bit wiegand, 8bit burst, ABA track II (FACE006EX) Weigand, ABA Track II output Single Communication Cables HOST FIELD With

1 Facial & Proximity, Smart Card Reader FACE006 Series Key Features Face Recognition and Proximity Reader Store up to 10,000 Facial Templates RF only, RF+Face, RF+P/W+Face, PIN+Face mode Fast verification time (less than 0.5sec) Network communication via RS232/RS422 (Max. 256ch), TCP/IP, USB Port External reader port to work with existing 26bit wiegand, 8bit burst, ABA track II (FACE006EX) Weigand, ABA Track II output Single Communication Cables HOST FIELD With ID-TECK s Controller Only RS422/232 Serial Converter or Lan Converter ADD. 11 RS422 ADD. 00 Registration Terminal FACE006 REG ADD. 01 ADD. 10 RS422 26bit Wiegand Comparison Table FACE006 Built-in 125KHz RF Reader (4 ) RF(PIN) Only / RF+FACE / RF +Password (4 digit)+face FACE006P PIN (4~8 digit)+face FACE006EX Built-in External Reader port (26bit Wiegand, 8bit burst, ABA Track II) FACE006SR Built-in MHz(MIFARE) Smart Card Reader(4inch) SMART RF only/smart RF + FACE / SMART RF + Password (4 digit) + FACE FACE006 READER ADD. 12 ADD. 13 ADD. 14 ADD. 15 ADD. 30 ADD Diffrent Communication Cables HOST Registration Terminal FACE006REG FIELD ADD. 00 Loop2 : RS422 With Other Company Controller or imdc(idteck) RS422/232 Serial Converter or Lan Converter Loop1 : RS422 ADD. 00 ADD. 01 ADD. 10 RS422 26bit Wiegand FACE006 READER RS422 ADD.01 ADD.02 ADD.03 ADD.04 ADD.253 ADD.254 FACE006EX 2 Diffrent Communication Cables Only HOST Registration Terminal FACE006 REG RS422/232 Serial Converter or Lan Converter FIELD ADD.00 Loop2 : RS422 Loop1 : RS422 OTHER COMPANY CONTROLLER ADD. 00 ADD. 01 ADD. 31 RS422 26bit Wiegand FACE006EX READER RS422 ADD.01 ADD.02 ADD.03 ADD.04 ADD.253 ADD.254 Input Signal Input Signal 26bit Wiegand, 8bit Burst, ABA Track II 26bit Wiegand, 8bit Burst(4 Char), ABA Track II

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FACE006 Series CPU 32bit DSP chip and 8bit/16bit Microprocessors Memory Face Module Program memory : 256KByte ROM Data memory : 8MB

Verification Time Less than 0.5sec RF Reader Face006 Built-in Proximity Reader (125KHz) Face006SR Built-in 13.

2 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FACE006 Series CPU 32bit DSP chip and 8bit/16bit Microprocessors Memory Face Module Program memory : 256KByte ROM Data memory : 8MB flash memory Controller Program memory : 2MB flash memory Face Templates 10,000 Facial Templates CCD Camera Built-in 230,000 pixel board camera Telephone Interphone / Telephone Selectable Face Verification Time Less than 0.5sec RF Reader Face006 Built-in Proximity Reader (125KHz) Face006SR Built-in 13.56MHz MIFARE External Reader (FACE006EX) 1 External Reader Port (26bit Weigand, 8bit Burst, ABA Track II) Output 26bit Weigand, ABA Track II, Video(NTSC), Audio, Telephone Jack Open Collector : FACE Verification Error Inputs : LED Control Beeper Control LCD Display 1 x Graphic LCD, 122 x 32 pixel Keypad 16 Numeric Keypad Communication Port RS232 / Addressable RS422(Max256ch), TCP/IP, USB (13.56MHz MIFARE ) Baud rate : 4800bps, 9600bps (default), 19200bps up to bps LED / Beeper Red, Green, Yellow LED, Piezo Buzzer Power DC12V / Max. 700mA Operation Environment -15ºC~+40ºC (+5ºF~104ºF), 10~90% RH(Non-Condensing) Color Dark Pearl Gray Weight 600g (1.25lbs) Ordering Information Part number FACE006 FACE006P FACE006EX FACE006SR Description Facial & Proximity PIN Reader (10,000 Facial Templates), Built in 125KHz RF reader Facial & PIN Reader (10,000 Facial Templates), PIN+FACE Facial & Proximity PIN Reader (10,000 Facial Templates), External Reader port Facial & Smart Card Reader (10,000 Facial Templates), Built-in 13.56MHz (MIFARE ) reader Dimensions inch (mm) Facial & Proximity, Smart Card Reader MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Facial Recognition Module/SDK FRM4000 (SDK) Key Features Standalone Facial

Search and Verification Algorithm) Fast Verification Time (Less than 0.

(Store up to 10,000 Facial Templates) Built-in Image Capture Function

bytes of reference ID numbers Control of Contrast, Brightness and

9600, 14400, 19200, 38400, 57600 and 115200bps selectable Download &

Development Kit)Available Facial Recognition SDK Consisting of : FRM4000

3 Facial Recognition Module/SDK FRM4000 (SDK) Key Features Standalone Facial Recognition Module Using Unique IDTECK Facial Recognition Algorithm (Face Search and Verification Algorithm) Fast Verification Time (Less than 0.5sec.) Built-in 32bit DSP chip Built-in Monitor Program 8MB Flash Memory (Store up to 10,000 Facial Templates) Built-in Image Capture Function Connectivity for 230K/430K Pixel CCD Camera with Video(NTSC) signal 4 bytes of reference ID numbers Control of Contrast, Brightness and Authorization Level Built-in RS232 communication port with Baud Rate of 9600, 14400, 19200, 38400, and bps selectable Download & Upload Facial Templates Single Power Supply of DC5V SDK (Software Development Kit)Available Facial Recognition SDK Consisting of : FRM4000 Module CCD Camera Communication Adapter Power Supply Software CD Protocol Manual Facial Recognition SDK DEMO KIT

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FRM4000 CPU 32bit DSP chip Memory Monitor Program memory:256kb ROM Data memory : 8MB Flash Memory Facial Templates 10,000 Facial

CCD Camera port 230K/430K pixel CCD camera with NTSC signal Communication port Single RS232 port Baud Rate : 9600bps(Default),14400bps,19200bps, 38400bps, 57600bps and 115200bps Power Single DC5V,

07lbs) Ordering Information Part number FRM4000 FRM4000-SDK CCD BW230 CCD COLOR Description Face Recognition Module with 8MB Flash memory Face Recognition Module(8MB) with Board Camera and Software

4 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FRM4000 CPU 32bit DSP chip Memory Monitor Program memory:256kb ROM Data memory : 8MB Flash Memory Facial Templates 10,000 Facial Templates Verification time Less than 0.5 sec. CCD Camera port 230K/430K pixel CCD camera with NTSC signal Communication port Single RS232 port Baud Rate : 9600bps(Default),14400bps,19200bps, 38400bps, 57600bps and bps Power Single DC5V, max.500ma Operating Environment -35 C ~+65 C(-31ºF~149ºF),10%~90%RH(Non-Condensing) Board Size 55mm x 95mm x 6mm Board Weight 30g(0.07lbs) Ordering Information Part number FRM4000 FRM4000-SDK CCD BW230 CCD COLOR Description Face Recognition Module with 8MB Flash memory Face Recognition Module(8MB) with Board Camera and Software Package(Protocol and Manual) Board Camera, B/W, 230 Pixel, NTSC Board Camera, Color, 230 Pixel, NTSC Dimensions inch (mm) Facial Recognition Module / SDK MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Fingerprints & Proximity, Smart Card Access Controller FINGER007 Series Key Features Dual function for Access Control and Time & Attendance 720 Fingerprints holders / 26,000 Event buffers (2,000 /

32ch), TCP/IP available with LAN Converter Dual Fingerprint Registration (Optional) Independent 4 inputs /4 output including 2 FORM-C Relay outputs External reader port for Anti-pass back operation

FINGER007 125KHz RF Reader(10cm) back lighting on keypad RF Only / RF+Fingerprints / RF+Password(4 digit) + Fingerprint FINGER007P PW(4~8 digit) + Fingerprint FINGER006SR 13.

5 Fingerprints & Proximity, Smart Card Access Controller FINGER007 Series Key Features Dual function for Access Control and Time & Attendance 720 Fingerprints holders / 26,000 Event buffers (2,000 / 4,500 Fingerprints optional) Standalone/Network communication via RS232/RS422 (max. 32ch), TCP/IP available with LAN Converter Dual Fingerprint Registration (Optional) Independent 4 inputs /4 output including 2 FORM-C Relay outputs External reader port for Anti-pass back operation Dual Tamper switches High Protection from scratch abd ESD Standalone Configuration Time & Attendance (Enterance) 26Bit Wiegand Output Door Lock Time Attendance (EXIT) or Exit Button Comparison Table FINGER KHz RF Reader(10cm) back lighting on keypad RF Only / RF+Fingerprints / RF+Password(4 digit) + Fingerprint FINGER007P PW(4~8 digit) + Fingerprint FINGER006SR 13.56MHz SMART RF Reader (10cm MIFARE ), LCD + Keypad back lighting on keypad SMART RF / SMART RF+ Fingerprint / SMART RF+ Password(4digit)+Fingerprint back lighting on keypad CVVSB /4C CVVSB /2C CVVSB /4C Network Configuration LAN Card Converter TCP/IP RS232 Modem RS422 to RS232 Converter Auto Dialer Wooden, Iron door Memory Capacities Time Code 10 Time Interval 5 Holiday Code 10 Holiday 32 RS422 (Max. 32)

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FINGER007 Series CPU 32bit Strong ARM and Dual 8bit Microprocessor Memory Finger Module Program Memory: 8Kbyte ROM Data Memory:

Event Buffers Template Size 800Bytes Reading Time Card(30ms), Fingerprint (less than 1 sec, 3 sec for auto match) RF Reader FINGER007 Built-in 4 (10cm) 125 KHz RF reader FINER007SR Built-in 4 13.

6 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FINGER007 Series CPU 32bit Strong ARM and Dual 8bit Microprocessor Memory Finger Module Program Memory: 8Kbyte ROM Data Memory: 1Mbit/2Mbit/4Mbit Flash Memory Controller Program Memory: 64 KByte Flash Data Memory: 4Mbit SRAM(Battery back up) Fingerprint Template/Event Buffers 720/2,000/4,500 Fingerprint Templates / 26,000 Event Buffers Template Size 800Bytes Reading Time Card(30ms), Fingerprint (less than 1 sec, 3 sec for auto match) RF Reader FINGER007 Built-in 4 (10cm) 125 KHz RF reader FINER007SR Built-in MHz MIFARE reader External 125KHz 1 Reader port (26bit Wiegand, 8bit Burst) (FINGER007) for antipass back Reader Port 13.56MHz 1 Reader port (34bit Wiegand, 8bit Burst) (FINER007SR) for antipass back Input/Output Ports Input: 4 (Isolation) Output: 2 Form-C Relay(COM, NO, NC) Rating Max. 2A, 2 TTL Outputs LCD Display 1x LCD Module, 2 lines x 16ch, 65.5 x 13.8mm screen Keypad 16 numeric keypad with back lighting Communications RS232/RS422( Max. 32 ch), TCP/IP available with LAN converter Baud Rate : 4800, 9600 (Default), bps and bps Software programmable LED Indicator/Beeper 3 LED (Red/Green/Yellow), Piezo buzzer Power DC12 V, Max. 350mA Operation Environment -15 C~ +40 C(+5ºF~104ºF), 10% ~90% RH(Non-Condensing) Color / Weight Dark pearl gray / 547g (1.20 lbs) Ordering Information Part number Description Finger007 Finger007 access controller (720 users), Built in RF reader Finger007P Finger007 access controller (720 users), PIN+Finger operation Finger007SR Finger007 access controller (720 users), Built in MIFARE reader There will be -x surfix with the part number and -2 is for 2,000 users and -4 is for 4,500 users. Dimensions Fingerprints & Proximity, Smart Card Access Controller inch (mm) MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Fingerprints & Proximity, Smart Card Reader FGR006 Series Key Features Proximity and Fingerprint Verification Stores up to 720/2,000/4,500 Fingerprints RS232 Communication jack for upload/download

7 Fingerprints & Proximity, Smart Card Reader FGR006 Series Key Features Proximity and Fingerprint Verification Stores up to 720/2,000/4,500 Fingerprints RS232 Communication jack for upload/download Fingerprints using PDA or Notebook Dual Fingerprint Registration RF only, RF+Finger mode (FGR006) Network communication via RS232/RS422/RS485 (Max. 255ch) and TCP/IP (Converter Required) Fast Verification Time less than 1 sec. External Reader Port to work with existing Proximity Reader (26bit Weigand) or Keypad/Barcode/Magstripe Reader (FGR006EX) Wiegand, ABA Track II Output Mode Selection of Two way Fingerprint download (Directly or indirectly to FGR006 from FGR006REG) High Protection from scratch and ESD Comparison Table FGR006 Built-in 125KHz RF Reader (4 ) RF Only / RF+Fingerprint FGR006EX Built in external reader port 26 bit wiegand, 8 bit burst, ABA Track II FGR006REG Fingerprint Registration Terminal FGR006RSR 13.56MHz SMART RF Reader (10cm MIFARE ) SMART RF/SMART RF + Fingerprint Single Communication Cables HOST FIELD With ID-TECK s Controller Only FINGER007 READER RS422/232 Serial Converter or Lan Converter ADD. 11 RS422 ADD. 00 Registration Terminal FGR006REG ADD. 12 ADD. 13 ADD. 14 ADD. 15 ADD. 30 ADD Diffrent Communication Cables HOST Registration Terminal FGR006REG FIELD ADD. 00 Loop2 : RS422 With Other Company Controller or imdc(idteck) FGR006 READER 26bit Wiegand ADD. 01 ADD. 10 RS422 RS422/232 Serial Converter or Lan Converter Loop1 : RS422 ADD bit Wiegand ADD. 01 ADD. 10 RS422 RS422 ADD.01 ADD.02 ADD.03 ADD.04 ADD.253 ADD.254 FGR006EX 2 Diffrent Communication Cables Only HOST Registration Terminal FGR006 REG RS422/232 Serial Converter or Lan Converter FIELD ADD.00 Loop2 : RS422 Loop1 : RS422 OTHER COMPANY CONTROLLER ADD. 00 ADD. 01 ADD. 31 RS422 26bit Wiegand FGR006EX READER RS422 ADD.01 ADD.02 ADD.03 ADD.04 ADD.253 ADD.254 Input Signal Input Signal 26bit Wiegand, 8bit Burst, ABA Track II 26bit Wiegand, 8bit Burst(4 Char), ABA Track II

8 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m FGR006 Series CPU 32bit Strong ARM and Dual 8bit Microprocessor Memory Module Program Memory: 8K Byte ROM Data Memory: 1Mbit/2Mbit/4Mbit flash Memory Controller Program Memory: 64K Byte Flash ROM Data Memory: 255KB SRAM Fingerprint Templates 720/2000/4500 Fingerprint Templates Template Size 800 Bytes Verification Time Less than 1 sec Proximity Reader FGR006 Built-in 10cm Proximity Reader (125KHz) FGR006SR Built-in 10cm MIFARE Reader (13.56 MHz) External Reader Port (FGR006EX) 1 Reader Port(26 bit Wiegand, ABA Track II, 8 Bit Burst(Keypad)) Output 26 bit Wiegand, ABA Track II Open Controller Output Fingerprint Verification Error Inputs LED Control, Beeper Control(RS485) Communication Port Addressable RS485/RS422(Max255)/RS232 Port/ TCP/IP(External converter) Baud Rate : 4800bps, 9600bps(Default), bps and 38400bps Power DC7V~DC17V, Max. 350mA Operating Environment -15 C~+40 C(+5ºF~104ºF), 10%~90% RH(Non-Condensing) Dimension 66mm x 129mm x 52mm (2.6 x 5.1 x 2.0 ) Ordering Information Part number Description FGR006 Fingerprints Reader (720 Fingerprints user), Built-in RF Reader FGR006REG Fingerprints Registration Terminal FGR006EX Fingerprints + External Reader Port (720 Fingerprint Reader) FGR006SR Fingerprints Reader (720 Fingerprints User), Built-in 13.65MHz(MIFARE) There will be -x surfix with the part number and -2 is for 2,000 users and -4 is for 4,500 users. Dimensions inch (mm) Fingerprints & Proximity, Smart Card Reader MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Contactless Smart Card & Reader SR10/SR20 ISC80/IMC135 Key Features SR10/20 13.

26/34bit Wiegand, RS232/RS485, ABA Track II Output Optional Password Authorization Function LED and Beeper Control Input 6 Array Red

9 Contactless Smart Card & Reader SR10/SR20 ISC80/IMC135 Key Features SR10/ MHz (MIFARE ) Smart Card Reader ISO14443 Type-A Compatible User Defined Format Available Data Read/Write Function by RS232 port 26/34bit Wiegand, RS232/RS485, ABA Track II Output Optional Password Authorization Function LED and Beeper Control Input 6 Array Red Color LED Indicators (SR10 Only) Weather Proof Epoxy Potting (SR20 Only) ISC80/IMC135 Credit Card Size and ISO Thickness (ISC80) Sticker Type Coin Tag (IMC135) 13.56MHz ISO14443 Type-A Compatible Passive Type Card and Tag 1Kbyte EEPROM Read and Write Function (SR10/SR20/SRK101 R/W Reader, PRG2000) Built-in Password Algorithm 10 Years Data Retention 100,000 Overwrite Times Optional Magnetic Stripe (ISC80) Printing Photo ID Embedding Biometrics Data (Using PRG2000B KIT)

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m SR10 / SR20 / ISC80 / IMC135 SR10 SR20 ISC80 IMC135 CPU 8bit Microprocessor Read Range 4inch(10cm) 4inch(10cm)

150mA Output 26/34bit Wiegand, RS232/RS485,ABA Track II External Beeper Control Low active, DC0 ~ 5V, Max.50mA External LED Control Low active, DC0 ~ 5V, Max.

39lbs) 185g(0.41lbs) Size 4 x5.6 x0.8 1.82 x4.81x0.87 2.13 x 3.38 x 0.03 1 (2.54cm) Diameter, (54mm x 86mm x 0.8mm) 0.

56MHz Mullion Type Proximity Reader based on MIFARE 13.56MHz MIFARE type (13.56MHz) ISO Standard Size Card MIFARE type (13.

10 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m SR10 / SR20 / ISC80 / IMC135 SR10 SR20 ISC80 IMC135 CPU 8bit Microprocessor Read Range 4inch(10cm) 4inch(10cm) Compatible Card ISO14443 Type-A (MIFARE) Frequency 13.56MHz Power DC 12V, Max.150mA Output 26/34bit Wiegand, RS232/RS485,ABA Track II External Beeper Control Low active, DC0 ~ 5V, Max.50mA External LED Control Low active, DC0 ~ 5V, Max.50mA LED/Beeper 6 Array Red LED, 2 Color LED(Red, Green), Piezo Buzzer Piezo Buzzer Operating Environment -15ºC ~ +65ºC, 10 ~90% Color Black Dark Pearl Gray Weight 180g(0.39lbs) 185g(0.41lbs) Size 4 x5.6 x x4.81x x 3.38 x (2.54cm) Diameter, (54mm x 86mm x 0.8mm) 0.04 (1mm) Thickness Ordering Information Part number SR-10 SR-20 ISC80 IMC135 Description Wall Mount Type Proximity Reader based on MIFARE 13.56MHz Mullion Type Proximity Reader based on MIFARE 13.56MHz MIFARE type (13.56MHz) ISO Standard Size Card MIFARE type (13.56MHz) Sticker Coin Tag Dimensions inch (mm) Magnetic stripe or Optical Barcode Contactless Smart Card & Reader ISC80 SR-10 SR-20 IMC135 MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Biometrics (Fingerprints) Embedded Smart Card Programmer PRG2000B Kit Key Features Fingerprints Embedded Smart Card

Patented Encryption Algorithm Connection for Fingerprint Registration Terminal(RS232) User Defined Format available

Contactless Read/Write Function from/to Smart Card (ISO14443 Type-A) Fast Overwrite Time less than 5 sec.

PRG2000B kit Consisting of PRG2000B Kit PRG2000B - 1 set FGR006REG (RS232) - 1set Application S/W CD - 1 copy Power

11 Biometrics (Fingerprints) Embedded Smart Card Programmer PRG2000B Kit Key Features Fingerprints Embedded Smart Card Program Kit PRG2000B kit Write Encrypted ID and Fingerprint Template on the Smart Card (ISO14443 type A compatible) Patented Encryption Algorithm Connection for Fingerprint Registration Terminal(RS232) User Defined Format available 2 x RS232 Communication Port for Biometrics Reader and PC Connection Connection to Personal Computer (RS232) Contactless Read/Write Function from/to Smart Card (ISO14443 Type-A) Fast Overwrite Time less than 5 sec. Card Issuing Application Software Package Database for Fingerprint User Management Single Power Supply PRG2000 PRG2000B kit Consisting of PRG2000B Kit PRG2000B - 1 set FGR006REG (RS232) - 1set Application S/W CD - 1 copy Power Adapter (AC110V~220V, Output DC 12V, 500mA) 1 ea Communication Cable (RS232, 9pin Female) 1 ea Software Manual 1 copy FGR006REG Holder - 1 ea

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PRG2000B kit CPU Memory

Weight 16bit microprocessor Program memory : 2Mbit ROM Data memory : 32Kbyte SRAM Built-in

2 x RS232 serial port 2 color LED, Piezo Buzzer Patented Encryption Algorithm Biometrics

+65ºC(+5ºF~149ºF), 10 ~90% RH(Non-Condensing) 230g(0.

Card Program kit Configuration PRG2000B kit RS232 PRG2000 RS232 FGR006REG Biometrics

12 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PRG2000B kit CPU Memory Reader Overwrite Time Communication LED / Beeper Data Encryption Software Power Environment Weight 16bit microprocessor Program memory : 2Mbit ROM Data memory : 32Kbyte SRAM Built-in Contactless Smart Card Reader (Read and Write) Less than 5 sec. 2 x RS232 serial port 2 color LED, Piezo Buzzer Patented Encryption Algorithm Biometrics Programming Software included DC 12V, 500mA Adapter included (AC 110V~220V) -15ºC ~ +65ºC(+5ºF~149ºF), 10 ~90% RH(Non-Condensing) 230g(0.50lbs) Ordering Information Part number PRG2000B kit Description Fingerprints Embedded Smart Card Program kit Configuration PRG2000B kit RS232 PRG2000 RS232 FGR006REG Biometrics (Fingerprints) Embedded Smart Card Programmer Card issuing application S/W MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

13 Fingerprints Embedded Smart Card Reader FGR006SRB Series Key Features Built-in Fingerprint and Smart Card Reader 13.56MHz ISO14443 Type-A compatible Read Fingerprint Templates directly from the Smart Card Unlimited Fingerprint User Decode Encrypted Biometrics Data using Patented Encryption Algorithm Protected ID and Fingerprint Template copy Support PRG2000B Biometrics Programmer with Software Tamper Alarm Function Fast Varification Time less than 1 sec. Built-in 2 color LED and Beeper sound 26bit/34bit Wiegand, ABA Track II, RS232/RS485 Output Format User Defined Format available Configuration Controller 26Bit Wiegand Output

Specifications CPU Memory i n t e l l i g e n t s e c u r i t y s y s t e m Reader Fingerprint Templates Verification Time Output FGR006SRB Series 32bit strong ARM and 16bit Microprocessor Program

14 Specifications CPU Memory i n t e l l i g e n t s e c u r i t y s y s t e m Reader Fingerprint Templates Verification Time Output FGR006SRB Series 32bit strong ARM and 16bit Microprocessor Program Memory: 2Mbit ROM Data Memory: 32Kbyte Sram Built-in Smart Card Reader (ISO14443 Type-A Compatible) Unlimited Less than 1 sec. 26bit/34bit Wiegand, ABA Track II, RS232/RS485 (Optional) Fingerprint Error output (Open Collector) Temper Switch Output LED Control, Beeper Control Input DC12V, Max. 300mA Red and Green LED, Piezo Buzzer -15 C~+40 C(+5ºF~104ºF), 10%~90% RH(Non-Condensing) Input Power LED/Beeper Environment Dimension 66mm x 129mm x 52mm (2.6 x 5.1 x 2.0 ) Weight 230g(0.50lbs) Ordering Information Part number FGR006SRB Description Fingerprints Embedded Smart Card Reader Dimensions inch (mm) Fingerprints Embedded Smart Card Reader MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Proximity / Smart / MS Card Time & Attendance Controller 505R 505M SR505R 505R/SR505R Key Features Dual Function for Access Control and Time & Attendance 500~10,000 users / 2500~7250 Events

15 Proximity / Smart / MS Card Time & Attendance Controller 505R 505M SR505R 505R/SR505R Key Features Dual Function for Access Control and Time & Attendance 500~10,000 users / 2500~7250 Events Standalone / Network communication via RS232/RS422(Max 32ch) and TCP/IP External Reader port for Anti Pass Back operation Independent 4 inputs and 4 outputs including 2 Form-C relay output Built in RF Reader Operation Mode selectable. Comparison Table 505R 125KHz RF Reader (4 ) RF / RF+Password(4 digit)/ PIN(4~6 digit) 505M Magstripe/Magstripe+Password (4~6digit)/PIN(4~6digit) SR505R 13.56MHz Smart RF Reader (5cm-MIFARE), Compatible with transportation card Smart RF/Smart RF+Password (4~6digit)/PIN(4~6digit) Standalone Door Lock Time & Attendance (Enterance) Time & Attendance (EXIT) Anti-pass back (EXIT) CVVSB /4C CVVSB /2C Expansion LAN Card 26Bit Wiegand Output CVVSB /4C TCP/IP or Converter 505M Exit Button Wooden, Iron door Memory Capacities Time Code 10 Time Interval 5 Holiday Code 10 Holiday 32 RS232 Dial Up Modem RS422 to RS232 Converter Auto Dialer Dial Up Modem RS422 (Max. 32)

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m 505R / 505M / SR505R CPU Memory Verification Time Proximity Reader External Reader Port User / Event Inputs / Output LCD Display

16 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m 505R / 505M / SR505R CPU Memory Verification Time Proximity Reader External Reader Port User / Event Inputs / Output LCD Display Keypads Communication port Display Status Power Operating Environment Color / Weight 505R SR505R 505M 125KHz 13.56MHz Magstirpe Dual 8bit microprocessors Program memory : 8K Byte ROM Data memory : 128KB ROM 30ms Built-in 10cm Proximity Reader (10cm) Built-in 5cm MIFARE Reader (13.56MHz) Built-in Magnetic Slot Reader 1 port for 26 bit Wiegand 1 port for 34 bit Wiegand 1 port for TTL interface Users : Selectable Events Users : 500~10,000, Events :2500~7250 Input: 4EA (Isolation) Output: 2EA of Form-C realy(com, NO, NC), Rating 2A, 2EA of TTL output 1X Character LCD Module, 2 linex16ch, 65.6X Number numeric Keypad 505R, SR505R: RS232/RS422 (Max32 ch)tcp/ip Available with LAN Converter (External Converter) Boud Rate : 4800bps, 9600bps(Default), bps and 38400bps Software Programmable Red/Green/Yellow LED, Piezo Buzzer DC12V, Max. 350mA -20 C~+70 C, 10%~90% RHD Dark Pearl Gray / 397g (1.88lbs) Order Information Dimensions Part number Description 505R-10 RF or PIN Only, RF+PW Operation (10,000 users) 505M-10 Magstripe or PIN Only, Magstripe+PW Operation (10,000 users) SR505R-10 MIFARE or PIN Only, MIFARE+PW Operation (10,000 users) Proximity/Smart/ MS Card Time & Attendance Controller The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com JAN 2003 Copyright 2003 IDTECK Co., Ltd.

RF/PIN Single Door Access Controller 100R Key Features Single Door Access Controller 512 Card holders Built-in 4 (10cm) RF reader RF only or RF+P/W (4~6 digit) operation modes

and unlock functions Setting for Safe / Secure mode Try-out error Alarm Optional 4ch Voice Auto-dialer 3 LEDs for system operation status Back lighting on keypad Water

17 RF/PIN Single Door Access Controller 100R Key Features Single Door Access Controller 512 Card holders Built-in 4 (10cm) RF reader RF only or RF+P/W (4~6 digit) operation modes External reader port for Exit Communication via RS232 Independent 5 inputs and 4 outputs including 2 output relays All I/Os and operating Times user front programmable Door lock and unlock functions Setting for Safe / Secure mode Try-out error Alarm Optional 4ch Voice Auto-dialer 3 LEDs for system operation status Back lighting on keypad Water Registance Standalone Door Lock Exit Reader or Exit Button CVVSB /4C CVVSB /2C CVVSB /4C Glass Door Expansion WEB Camera Server Internet CCTV Camera RS232 Mobile Phone

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m 100R CPU Memory Read Range Reading Time Card Holders Input / Output ports Reader Port Communication Keypads Self Diagnostic LED

30ms 512 Card holders Inputs : 5 ea Relay Outputs : 2 ea (COM, NO, NC) TTL Output : 1 ea Chime bell output : 1 ea 1 External reader port (26 bit Wiegand format) RS232, Baud rate : 9600bps 12 numeric

464 lbs) Ordering Information Part number Description 100R-5 RF or PIN only, RF+PIN Operation (512 users) Dimensions inch (mm) RF/PIN Single Door Access Controller MAR 2003 Copyright 2003 ID TECK Inc.

18 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m 100R CPU Memory Read Range Reading Time Card Holders Input / Output ports Reader Port Communication Keypads Self Diagnostic LED indicators Power Operating Environment Reset Color Weight IDK50 IDC170 IDC80 Dual 8bits microprocessors Program memory : 20 KB ROM Data memory : 2 KB EEPROM 2 inch (5cm) 4 inch (10cm) 4 inch (10cm) 30ms 512 Card holders Inputs : 5 ea Relay Outputs : 2 ea (COM, NO, NC) TTL Output : 1 ea Chime bell output : 1 ea 1 External reader port (26 bit Wiegand format) RS232, Baud rate : 9600bps 12 numeric keypad with back lighting Yes 3 LEDs (Red, Green, Yellow) DC 12V, max. 200mA -35 C ~ +65 C, 10% ~ 90% humidity Watch-dog timer & power on reset Dark pearl gray 210g (0.464 lbs) Ordering Information Part number Description 100R-5 RF or PIN only, RF+PIN Operation (512 users) Dimensions inch (mm) RF/PIN Single Door Access Controller MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

programmable Door lock / unlock function Anti-magnetic protection Try-out error alarm and keypad lock 3 LEDs for system

19 PINPAD Single Door Access Controller PIN120 Key Features Single Door Access Controller 512 PIN numbers User defined 4~6 digit PIN numbers 1 exit input and 2 Relay outputs Chime bell output All I/Os and operating Times user front programmable Door lock / unlock function Anti-magnetic protection Try-out error alarm and keypad lock 3 LEDs for system operation status Water Registance Standalone Door Lock Exit Button CVVSB /4C CVVSB /2C CVVSB /4C Glass Door

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PIN120 CPU Memory PIN numbers Input / Output ports Keypads Self Diagnostic LED indicators Power Operating Environment Reset Color

back lighting Yes 3 LEDs (red, green and yellow) DC 12V, 200mA. -35 C ~ +65 C, 10% ~ 90% humidity Watch-dog timer & power on reset Dark gray 197g (0.

20 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PIN120 CPU Memory PIN numbers Input / Output ports Keypads Self Diagnostic LED indicators Power Operating Environment Reset Color Weight 8bit microprocessor Program memory : 20KB ROM Data memory : 2KB FLASH memory 512 PIN numbers Inputs : 1 ea Relay Outputs : 2 ea (COM, NO, NC) Chime bell output : 1 ea 12 numeric keypad with back lighting Yes 3 LEDs (red, green and yellow) DC 12V, 200mA. -35 C ~ +65 C, 10% ~ 90% humidity Watch-dog timer & power on reset Dark gray 197g (0.44 lbs) Order Information Part number PIN120-5 Description PIN operation Only (512 users) Dimensions PINPAD Single Door Access Controller The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com NOV 2002 Copyright 2002 IDTECK Co., Ltd.

Proximity Door Lock PDL100 Key Features Proximity

Holders and One Master Card Battery Operation

and Internal Buzzer Initializing Button Card Data

Door Open Time (Fixed) Mode setting for Manual /

21 Proximity Door Lock PDL100 Key Features Proximity Door Lock Built-In Proximity Reader 512 Card Holders and One Master Card Battery Operation (30,000 opening) Low Battery Alarm Two Color LED and Internal Buzzer Initializing Button Card Data retains without Battery 5 sec. Door Open Time (Fixed) Mode setting for Manual / Auto Lock function Wake up for 5 sec. to read Proximity Card by Infrared Sensor

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PDL100 Door Lock Door Handle Card Holders Proximity Reader Card Format Memory Power Openings Door Open Time IR Sensor

26bit Wiegand format Non-volatile memory (Flash memory) 8 x AA size battery 30,000 times door openings 5 sec. Fixed door open time Wake up for 5 sec.

16lbs) Order Information Part number PDL100G PDL100S Description Proximity Door Lock, Gold color Proximity Door Lock, Silver color Dimensions inch (mm) Proximity Door Lock The specifications

22 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m PDL100 Door Lock Door Handle Card Holders Proximity Reader Card Format Memory Power Openings Door Open Time IR Sensor Initializing Button LED Buzzer Operating Environment Color Weight Motor driven lock and unlock Left/Right handle selectable 512 card holders and one master card Built-In proximity reader IDTECK 26bit Wiegand format Non-volatile memory (Flash memory) 8 x AA size battery 30,000 times door openings 5 sec. Fixed door open time Wake up for 5 sec. to read Proximity Card Built-In Indoor set 2 LED (Red and Green) Internal Buzzer sound -20 C ~ +60 C, 10% ~ 90% Humidity Gold and Silver Color 2.8kg (6.16lbs) Order Information Part number PDL100G PDL100S Description Proximity Door Lock, Gold color Proximity Door Lock, Silver color Dimensions inch (mm) Proximity Door Lock The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com NOV 2002 Copyright 2002 IDTECK Co., Ltd.

Standalone Single Door Controller RFL200 RFL100C/200C Key Features Controller+RF Reader (125KHz, 10cm read range) 512 Card holders Standalone (RFL200) or Network Communication (Max.

Standalone (Max 255) RS485 RS232 Converter RS485 (Max.

(Max255) Event data safety mode in Electronic outage Required to control more than 16 units (RFL100C, RFL200C) *Lock Control only without event management Less than 16 units RS485 RS232 Converter

23 Standalone Single Door Controller RFL200 RFL100C/200C Key Features Controller+RF Reader (125KHz, 10cm read range) 512 Card holders Standalone (RFL200) or Network Communication (Max.256) via RS485 (RFL100C/RFL200C) Power Fail Safe or Power Fail Secure locks Selectable Epoxy potted (Waterproof) Interface controller required to control more than 16 units (RFL100C/200C) RFL100C Standalone (Max 255) RS485 RS232 Converter RS485 (Max. 255) RFL200/200C RFL100C#1 RFL200C#2 RFL100C#255 Interface Controller Interface controller for communication Max 8,000 event (RFL100C/RFL200C connection) Network Communication via RS422/RS485 (Max255) Event data safety mode in Electronic outage Required to control more than 16 units (RFL100C, RFL200C) *Lock Control only without event management Less than 16 units RS485 RS232 Converter RS485 (Max. 16) Comparison Table RFL100C/200C RS485 (3 types of systems available : Refer configrations on right side) RFL200 Standalone RFL100C#1 RFL200C#2 RFL100C#16 *Event Management and Lock control Over 16 units : Interface Controller required RS422 RS232 Converter RS422 RS422 RS422 (Max. 255) Interface Board #1 Interface Board #2 Interface Board #254 Interface Board #255 RFL100C #1 RFL100C #1 RFL100C #1 RFL100C #1 RFL200C #2 RFL200C #2 RFL200C #2 RFL100C #2 RFL100C #16 RFL100C #16 RFL100C #16 RFL100C #16 *Event Management and Lock control

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RFL200 / RFL100C / 200C RFL200/RFL100C/200C Read Range Reading Time Card Holders IDK50 IDC170 IDC80

Weight Interface Controller CPU Power Communication Event Buffer Operating Environment Reset Weigh RFL100C RFL200/200C 2 inch (5cm) 4 inch (10cm) 4 inch (10cm) 30ms

255 Address) Baud Rate : 9600bps (fixed) 5 sec (RFL200), User Adjustable (RFL100C/200C) Power Fail Safe or Power Fail Secure Locks Selectable 1 EA 125KHz, 10cm

35Ibs) 80g (0.18 lbs) 8bit Microprocessor DC7V~12V, Max.350mA RS232/RS485/RS422 Selectable 4800,9600(Default),19200 pps Baud Rate, Max.

RFL200-5 RF Operation only (512 module) RFL200C-5 RF Only, Communicate via RS485 (Max. 256) RFL100C-5 RF Only, Communicate via RS485 (Max.

24 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RFL200 / RFL100C / 200C RFL200/RFL100C/200C Read Range Reading Time Card Holders IDK50 IDC170 IDC80 RFL100C/200C RFL200 Com port (RFL100C/200C) Door Open Time Lock Select Input Exit Button Input Reading format LED / Buzzer Power Operating Environment Reset Color Weight Interface Controller CPU Power Communication Event Buffer Operating Environment Reset Weigh RFL100C RFL200/200C 2 inch (5cm) 4 inch (10cm) 4 inch (10cm) 30ms Max.512 Max.512 including Master RS485 (Max.255 Address) Baud Rate : 9600bps (fixed) 5 sec (RFL200), User Adjustable (RFL100C/200C) Power Fail Safe or Power Fail Secure Locks Selectable 1 EA 125KHz, 10cm Reader including 2 color LED (Red and Green), Piezo Buzzer DC 12V, 200mA -35 C ~ 65 C, 10 ~ 90% humidity Watch-dog timer & Power on Reset Dark pearl gray 160g (0.35Ibs) 80g (0.18 lbs) 8bit Microprocessor DC7V~12V, Max.350mA RS232/RS485/RS422 Selectable 4800,9600(Default),19200 pps Baud Rate, Max.255 addressable 1Mbit SRAM(Back up),8000event -35 C~+65 C,10%~90% humidity Watch-dog timer & Power on Reset 100g Order Information Dimensions Part number Description RFL200-5 RF Operation only (512 module) RFL200C-5 RF Only, Communicate via RS485 (Max. 256) RFL100C-5 RF Only, Communicate via RS485 (Max. 256) Standalone Single Door Controller The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com JAN 2003 Copyright 2003 IDTECK Co., Ltd.

25 Single Door Access Control Panel ICON100 ICON100SR Key Features Single Door Access Control Panel Dynamic Control of memory up to 10,000 Card holders / 7,250 Events RF reader Output Data Format Required -125KHz : 26bit Wiegand, 8bit burst(icon100) MHz(MIFARE): 34bit Wiegand (ICON100SR) Communication via RS232/RS422 (max. 32ch), TCP/IP available with LAN Converter 2 Proximity reader ports (26 bit Wiegand format, 8 bit burst for PIN, 34bit wiegand) Independent 5 inputs and 4 outputs including 2 output Relays Event data and system set value safety mode in electric outage Anti-pass back operation Optional LCD display and keypad Standalone 26Bit Wiegand Output Entrance Reader Door Lock Exit Button CVVSB /4C CVVSB /2C CVVSB /6C CVVSB /4C Exit Reader Wooden, Steel door Memory Capacities Time Code 10 Time Interval 5 Holiday Code 10 Holiday 32 RS232 Expansion LAN Card Converter TCP/IP Dial Up Modem Dial Up Modem RS422 to RS232 Converter Auto Dialer RS422 (Max. 32)

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m ICON100 / ICON100SR CPU Memory External Reader Ports Card holders /Event buffers Input/Output Ports Communications LED Indicator Power

burst) User adjustable Card holder: 500~10,000 Event buffer: 2,500~7,250 Events Input: 5 (Isolation) Output: 2 Form-C Relay(COM, NO, NC) Rating Max. 2A, 2 TTL Outputs RS232/RS422( Max.

26 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m ICON100 / ICON100SR CPU Memory External Reader Ports Card holders /Event buffers Input/Output Ports Communications LED Indicator Power Operation Environment Weight Size Optional LCD Display Keypad 8 bit Microprocessor Program Memory: 64 bit ROM Data Memory: 128 KB RAM (Battery back up) 2 reader ports (26 bit Wiegand format, 8 bit burst) User adjustable Card holder: 500~10,000 Event buffer: 2,500~7,250 Events Input: 5 (Isolation) Output: 2 Form-C Relay(COM, NO, NC) Rating Max. 2A, 2 TTL Outputs RS232/RS422( Max. 32ch), TCP/IP available with LAN converter Baud Rate : 4800, 9600 (Default), bps and bps Software programmable 5 LED of Red/Green/Yellow, Piezo buzzer DC12 V, Max. 150mA 0 C~ +70 C, 10% ~90% humidity 170g (0.37 lbs) 137mm x 137mm x 18mm 1x LCD Module, 2 lines x 16ch, 65.5 x 13.8mm screen 16 numeric keypad with back lighting Order Information Part number ICON ICON ICON ICON100SR-10 ICON100SR-11 Description Single Door Control Board (10,000 users) Nema Case Pack: Nema Case+Control board+power board+battery LCD &Keypad: Connectable to the control board for standalone operation Single Door Control Board (10,000 users) Nema Case Pack: Nema Case+Control board+power board+battery Dimensions 5.4(137) Single Door Access Control Panel 5.4(137) The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com Depth : 0.75(19) JAN 2003 Copyright 2003 IDTECK Co., Ltd.

Intelligent multi Door(4) Access Control Panel itdc Key Features 2~4 Door Access Control Panel (EIO 8/8 required to control 3 and 4 doors) Dynamic control of memory up to 20,000 card holders / 29,500

56Mhz(MIFARE ): 34bit Weigand (itdcsr) TCP/IP Communication (Optional TCP/IP LAN module) Isolated 7 inputs and 4 relays (3 TTL outputs) Expansion I/O Board Available (EIO88 : 8 Input/8 Output) 15

27 Intelligent multi Door(4) Access Control Panel itdc Key Features 2~4 Door Access Control Panel (EIO 8/8 required to control 3 and 4 doors) Dynamic control of memory up to 20,000 card holders / 29,500 events Standalone or RS232/RS422(Max 256ch) Network communication Reader Interface - 125KHz: 26bit Weigand, 8 bit burst (itdc) Mhz(MIFARE ): 34bit Weigand (itdcsr) TCP/IP Communication (Optional TCP/IP LAN module) Isolated 7 inputs and 4 relays (3 TTL outputs) Expansion I/O Board Available (EIO88 : 8 Input/8 Output) 15 Time schedule and 10 holiday schedule Antipass back function Front system direct program via LCD with keypad (optional) Event Data and system set value safety mode in electric outage Access Control itdc System Configuration Time Schedule Time Code 15 Time Interval 5 Holiday Code 10 Holiday 100

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m itdc CPU 8bit Microprocessor Memory Program Memory: 64KB ROM Date Memory: 512KB RAM-Data retains by battery External Reader Port 4

28 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m itdc CPU 8bit Microprocessor Memory Program Memory: 64KB ROM Date Memory: 512KB RAM-Data retains by battery External Reader Port 4 Reader port (26bit Weigand, 8 Bit Burst) Card Holders / Event Buffers User Defined card holders and event buffers Card Holders : 1,000~20,000 Event Buffers : 20,000~29,500 Input / Output Input: 7EA (Isolation) Output : 4 Form C-Relay (COM, NO, NC), Rating Max 2A and 3 TTL Output Communication Port RS232/RS422(Max 265), TCP/IP (Optional LAN module required) Baud Rate : 4800, 9600(Default), TCP/IP, 38400bps Software Programmable LED / Beeper 21LED and Buzzer Power DC12V / Max. 350mA Operation Environment 0 O C~+65 O C(+32ºF~149ºF), 10~90% RH(Non-Condensing) Weight 250g (0.55lbs) Dimension 185mm x 145mm x 18mm Optional (for manual setting) LCD Module 1 x LCD module, 2 line x 16inch x 13.8mm Keypad 16 Keys TCP/IP Module (Internal) IGM7100 (TCP/IP Communication) Expansion I/O Board EIO88 (8 Input / 8 Output Relays) Ordering Information Dimensions Part number Description itdc Multi Door (2~4) Controller itdc Pack-01 Nema Case + Control Board + Power Board + Battery + EIO 88 Board itdc Pack-02 Nema Case + Control Board + Power Board + Battery + EIO 88 Board + TCP/IP LAN Module itdc Pack-03 Nema Case + Control Board + Power Board + Battery EIO88 External input/output board (8/8) TCP/IP TCP/IP Module inch (mm) Intelligent multi Door (4) Access Control Panel itdc Main Board EIO Board (EIO88) MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Intelligent multi Door(32) Access Control Panel imdc Key Features 32 Door Access Control Panel (16LC Connection) Dynamic control of memory up

256ch) and TCP/IP Communication(Optional TCP/IP LAN module) 1 Main imdc board can control 16 slave boards (LC/IOC/EIO) Anti pass back

Communication, 2 reader control, 4 Input/4 Output (Expandable up to 8 Input/8 Output with LIO) imdc IOC : Addressable I/O Controller, RS422/485

29 Intelligent multi Door(32) Access Control Panel imdc Key Features 32 Door Access Control Panel (16LC Connection) Dynamic control of memory up to 100,000 card holders / 200,000 events User define reader interface available RS422(Max. 256ch) and TCP/IP Communication(Optional TCP/IP LAN module) 1 Main imdc board can control 16 slave boards (LC/IOC/EIO) Anti pass back (Zone/Global) PIN number and data format auto selectable 4 levels individual door opening time set for handicap person imdc LC : RS422/RS485 Communication, 2 reader control, 4 Input/4 Output (Expandable up to 8 Input/8 Output with LIO) imdc IOC : Addressable I/O Controller, RS422/485 Communication, 8 Input/8 Output imdc EIO8/8: Addressable I/O Board, 8 Input/8 Output Access Control imdc System Configuration Time Schedule Time Code 127 Time Code Day 9 Time Interval 5 Holiday Code 17 Holiday 64

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m imdc IMDC-MC (Main Controller) CPU 32bit DSP Memory Program Memory: 256K Word Flash Date Memory: 1.

Event Buffers Card Holders (Optional) : 40,000~100,000 Card Holders/ 243,000~67,000 Event Buffers (IMDC-RAM Required) LC(IOC) Control 16EA (LC/IOC/EIO can be connected) Reader Management: 32port,

includes Disable and Normal Anti-Pass Back Zone and Global Anti Pass Back 2men operation Apply to all readers are available Absence Function Apply to all doors are available Single-Conditional

30 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m imdc IMDC-MC (Main Controller) CPU 32bit DSP Memory Program Memory: 256K Word Flash Date Memory: 1.5MB SRAM (Battery Back Up) Power 350mA@DC12V (RAM, TCP/IP included) Card Holders / Event Buffers User Defined Card holders and Event Buffers Card Holders : 20,000~40,000 Card Holders/ 69,000~10,000 Event Buffers Card Holders (Optional) : 40,000~100,000 Card Holders/ 243,000~67,000 Event Buffers (IMDC-RAM Required) LC(IOC) Control 16EA (LC/IOC/EIO can be connected) Reader Management: 32port, (User Define Reader date format available)/ I/O Management: 128//128 Communication RS422(4800~ bps) (Max256), TCP/IP (Optional) Operating Mode Door control by user 4 types of user available includes Disable and Normal Anti-Pass Back Zone and Global Anti Pass Back 2men operation Apply to all readers are available Absence Function Apply to all doors are available Single-Conditional Operation Conditional output control (Reader Mode include) store up to 512 conditions Multi-Conditional Operation Conditional output control (Reader Mode include) store up to 64 conditions Reader Operating Mode Control reader Operating Mode by Input Condition, Store up to 32 Optional Expansion Memory imdc-ram: 4.0MByte SRAM(Battery Back Up) TCP/IP Module (Internal) IGM7100: TCP/IP Communication IMDC-LC (Local Controller) CPU Memory Power Reader Port Date Format Input / Output Communication LED Operation Environment Optional Expansion I/O Board 8bit Microprocessor Program Memory: 64KB ROM DC12V / Max. 350mA-Expansion I/O included 2 Reader port (LED and Buzzer included) User define Wiegand format include 8 bit burst (Any of Wiegand format acceptable) 4/4 (Expandable up to 8/8) with optional LIO Board (4/4), Relay output DC12~24V 2A Max. RS422/RS485 (9600~38400bps) 13 LED indicator 0 O C~+65 O C(+32ºF~149ºF), 10~90% RH(Non-Condensing) imdc-lio: 4 input / 4 output IMDC-IOC (Input/Output Controller) Description Addressable I/O Controller Communication RS422/485 I/O Port 8 Inputs / 8 Outputs EIO88 (Input/Output Board) Description Communication I/O Port Addressable I/O Board RS422/485 8 Inputs / 8 Outputs Dimensions inch (mm) Intelligent multi Door (32) Access Control Panel IMDC-MC IMDC-LC IMDC-IOC EIO88 MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

Proximity Card Reader RF10/20/ TINY Key Features Read Range : Up to 4 (10cm)

(RF10, TINY) and wall mount (RF20) PSK, ASK modulation 100% Water Proof Dual

polarity protection RF10 RF20 RF TINY RF10/20/30/70/TINY Controller 26Bit Wiegand

31 Proximity Card Reader RF10/20/ TINY Key Features Read Range : Up to 4 (10cm) Wiegand, RS232, ABA Track II magstripe format available Metal door frame, mullion (RF10, TINY) and wall mount (RF20) PSK, ASK modulation 100% Water Proof Dual reading tech reader / Active and Passive Solid Epoxy potted Reverse power polarity protection RF10 RF20 RF TINY RF10/20/30/70/TINY Controller 26Bit Wiegand Output CVVSB x6c CVVSB x4c CVVSB /4C Controller CVVSB /2C Glass Door

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF10/20/TINY Read Range IDK50 IDC170 IDC80 Reading Time Input voltage / Current Output format External Buzzer control Input

180mA (@DC12V RS232 output) 26 bit Wiegand, RS232 and ABA track II magstripe format Low active, DC0~5V, max. 50mA, Impedance 10K ohm Low active, DC0~5V, max.

18 lbs) Ordering Information Part number RF10-Wie RF10-232 RF10-ABA RF20-Wie RF20-232 RF20-ABA RF TINY-Wie RF TINY-232 RF TINY-ABA Description 10cm RF Reader(RF10) with Wiegand 26bit Output 10cm

ABA Track II Output 10cm RF Reader(RF TINY) with Wiegand 26bit Output 10cm RF Reader(RF TINY) with RS232 Output 10cm RF Reader(RF TINY) with ABA Track II Output Dimensions inch (mm) Proximity

32 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF10/20/TINY Read Range IDK50 IDC170 IDC80 Reading Time Input voltage / Current Output format External Buzzer control Input External LED control Input LED / Buzzer Operating Environment Color Weight RF10 RF20 RF TINY 2 inch (5cm) 4 inch (10cm) 4 inch (10cm) 30ms DC 5 ~ 12V, max. 180mA (@DC12V RS232 output) 26 bit Wiegand, RS232 and ABA track II magstripe format Low active, DC0~5V, max. 50mA, Impedance 10K ohm Low active, DC0~5V, max. 50mA, Impedance 10K ohm 2 color LED (red and green), Piezo Buzzer -35 F ~ 149 F (-35 C ~ +65 C) Dark pearl gray 160g (0.35 lbs) 185g (0.41 lbs) 80g (0.18 lbs) Ordering Information Part number RF10-Wie RF RF10-ABA RF20-Wie RF RF20-ABA RF TINY-Wie RF TINY-232 RF TINY-ABA Description 10cm RF Reader(RF10) with Wiegand 26bit Output 10cm RF Reader(RF10) with RS232 Output 10cm RF Reader(RF10) with ABA Track II Output 10cm RF Reader(RF20) with Wiegand 26bit Output 10cm RF Reader(RF20) with RS232 Output 10cm RF Reader(RF20) with ABA Track II Output 10cm RF Reader(RF TINY) with Wiegand 26bit Output 10cm RF Reader(RF TINY) with RS232 Output 10cm RF Reader(RF TINY) with ABA Track II Output Dimensions inch (mm) Proximity Card Reader MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

modulation Epoxy potted 100% Water Proof RF10/20/30/70/TINY Controller 26Bit

33 Proximity Card Reader RF30 Key Features Up to 12 (30cm) read range User format available Wiegand, RS232, ABA track II magstripe format available PSK, ASK modulation Epoxy potted 100% Water Proof RF10/20/30/70/TINY Controller 26Bit Wiegand Output CVVSB x6c CVVSB x4c CVVSB /4C Controller CVVSB /2C Glass Door

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF30 Read Range IDK50 IDC170 IDC80 IDA150 IDA200 Reading Time Input voltage / Current Output format External Buzzer control Input

2m) 30ms DC 7 ~ 17V, max 250mA (@DC12V RS232 output) 26 bit Wiegand, RS232 and ABA track II magstripe format Low active, DC0~5V, max. 50mA, Impedance 10K ohm Low active, DC0~5V, max.

81 lbs) Order Information Part number RF30-Wie RF30-232 RF30-ABA Description Mid Range Proximity Reader with Weigand output Mid Range Proximity Reader with RS232 output Mid Range Proximity Reader

34 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF30 Read Range IDK50 IDC170 IDC80 IDA150 IDA200 Reading Time Input voltage / Current Output format External Buzzer control Input External LED control Input LED / Buzzer Operating Environment Color Weight 6 inch (15cm) 12 inch (30cm) 12 inch (30cm) Up to 3.3 feet (1m) Up to 4 feet (1.2m) 30ms DC 7 ~ 17V, max 250mA (@DC12V RS232 output) 26 bit Wiegand, RS232 and ABA track II magstripe format Low active, DC0~5V, max. 50mA, Impedance 10K ohm Low active, DC0~5V, max. 50mA, Impedance 10K ohm 2 color LED (red and green), Piezo Buzzer -31 F ~ 149 F (-35 C ~ +65 C) Dark pearl gray 370g (0.81 lbs) Order Information Part number RF30-Wie RF RF30-ABA Description Mid Range Proximity Reader with Weigand output Mid Range Proximity Reader with RS232 output Mid Range Proximity Reader with ABA TrackII output Dimensions Proximity Card Reader The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com NOV 2002 Copyright 2002 IDTECK Co., Ltd.

Proximity Card Reader RF70 Key Features Reading

II magstripe format available PSK, ASK modulation

Controller 26Bit Wiegand Output CVVSB 1.

35 Proximity Card Reader RF70 Key Features Reading Range -IDC80 : Up to 28 inch(70cm) -IDA200 : Up to 7 feet(2.1m) -IDA150 : Up to 5 feet(1.5m) User format available Wiegand, RS232, ABA track II magstripe format available PSK, ASK modulation Epoxy potted 100% Water Proof RF10/20/30/70/TINY Controller 26Bit Wiegand Output CVVSB x6c CVVSB x4c CVVSB /4C Controller CVVSB /2C Glass Door

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF70 Read Range IDK50 IDC170 IDC80 IDA150 IDA200 Reading Time Input voltage / Current Output format External Buzzer control Input

36 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m RF70 Read Range IDK50 IDC170 IDC80 IDA150 IDA200 Reading Time Input voltage / Current Output format External Buzzer control Input External LED control Input LED / Buzzer Operating Environment Color Weight 12 inch (30 cm) 28 inch (70 cm) 28 inch (70 cm) 5 foot (1.5 m) 7 foot (2.1 m) 30ms DC 12 ~ 24V, max 600mA 26 bit Wiegand, RS232 and ABA track II magstripe format Low active, DC0~5V, max. 50mA, Impedance 10K ohm Low active, DC0~5V, max. 50mA, Impedance 10K ohm 2 color LED (red and green), Piezo Buzzer -35 F ~ 149 F (-35 C ~ +65 C) Dark pearl gray 1.4 Kg (3 lbs) Order Information Part number RF70-Wie RF RF70-ABA Description Long Range Proximity Reader with Weigand output Long Range Proximity Reader with RS232 output Long Range Proximity Reader with ABA Track II output Dimensions Proximity Card Reader The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com NOV 2002 Copyright 2002 IDTECK Co., Ltd.

37 Proximity Card & Key Tag IDC80/IDC170 IDK50/IMC125 IDC80 IDC170 Key Features ISO Credit card size and thickness Customized format available Wiegand, ABA track II, Magstripe Format Passive Type (125KHz) Combination available with Magnetic stripe (IDC80) Printing Company logo with Graphic (IDC80-front & rear) Key tag (IDK50) MiniProx Sticker Tag (IMC125) Easily attached on Personal belongings to use (IMC125) MS/Barcode card, Wallet PGM1000(R/W Device)-Device to program to read / write user s unique format into proximity card IMC125 IDK50

Specifications i n t e l l i g e n t s e c u r i t y s y s t e m IDC80 / IDC170 / IDK50 / IMC125 Read Range RF10 RF20 RF TINY RF30 RF70 RFK101 100R 505R Finger007 Material Operating Temperature

inch (5Cm) Up to 12 inch (30Cm) Up to 6 inch (15Cm) Up to 28 inch (70Cm) Up to 12 inch (30Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2

38 Specifications i n t e l l i g e n t s e c u r i t y s y s t e m IDC80 / IDC170 / IDK50 / IMC125 Read Range RF10 RF20 RF TINY RF30 RF70 RFK R 505R Finger007 Material Operating Temperature Coding Graphics Size (WxHxT) Color Weight IDC80 IDC170 IDK50 IMC125 IDC80 IDC170 IDK50 IMC125 Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 12 inch (30Cm) Up to 6 inch (15Cm) Up to 28 inch (70Cm) Up to 12 inch (30Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) Up to 4 inch (10Cm) Up to 2 inch (5Cm) PVC ABS Plastic -22 F~149 F (-30 C~+65 C) Wiegand,ABA Track II magstripe Customized Color available 2.13 x 3.38 x 0.03 inch (54 x 86 x 0.8mm) 2.13 x 3.38 x 0.07 inch (54 x 86 x 1.7mm) 1.81 x 1.1 x 0.23 inch (46 x 28 x 6mm) 1 x 1 x 0.04 inch (2.54 x 2.54 x 1mm) White White/Ivory Black/Ivory White 5.5g (0.01 lbs) 9g (0.02 lbs) 4g (0.01 lbs) 2g (0.005 lbs) Order Information Part number IDC80 IDC170 IDK150-B IMC125 Description ISO standard size card (54x86x0.8 mm) ClamShell card (54x86x1.7 mm) Key Tag with Beige Color MiniProx sticker Tag (2.54X 2.54 X 1mm) Dimensions inch (mm) Proximity Card & Key Tag The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82) webmaster@idteck.com JAN 2003 Copyright 2003 IDTECK Co., Ltd.

39 STARWATCH Software Access Control System Software 100R, ICON100, ITDC, 505R/FINGER007 Easy installation and programming Various patterns of Time & Attendance Reports Real time monitoring of doors Plans and maps for alarm monitoring. Multi language support for text. Zone & Global Anti Pass back Queries, reports and export of data Remote control of single building or multiple remote sites via modem or TCP/IP network. Visitor Management Integral Photo ID Badging Access & Surveillance system controlling with Video images

i n t e l l i g e n t s e c u r i t y s y s t e m STARWATCH

work record of off-day for each employee available from setting

month and year Create monthly work recodes based on Text or

efficiently used on other Time & Attendance, payment

All reports can be converted to various file such as PDF, HTML,

Converted files can be transmitted via internet or email

leaving early, extra work (work on off-day), total working days,

year Work with data base from other systems based on oracle, and

Hands free, Car Parking Control System Software Parking Ticket

Entry & Exit Car parking space and number Control Parking

40 i n t e l l i g e n t s e c u r i t y s y s t e m STARWATCH Software Time & Attendance System Software 505R/FINGER007 Manage work record of off-day for each employee available from setting individual s off-day Create Time & Attendance data for day, month and year Create monthly work recodes based on Text or Excel file from data export function Exported data can be efficiently used on other Time & Attendance, payment calculation, and ERP programs. All reports can be converted to various file such as PDF, HTML, XLS (Excel) file without any change from original data. Converted files can be transmitted via internet or Calculate various work records including work time, late time, leaving early, extra work (work on off-day), total working days, total late days, and total leaving early day by day, month, and year Work with data base from other systems based on oracle, and SQL server. Hands free, Car Parking Control System Software Parking Ticket control Discount Program operation Real Time monitoring for Entry & Exit Car parking space and number Control Parking duration monitoring StarWatch Software MAR 2003 Copyright 2003 ID TECK Inc. The specifications contained in this catalog are subject to change without notice at any time. 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangsuh-Gu, Seoul, Korea Tel : (82) Fax : (82-2) webmaster@idteck.com

RFID & BIOMETRICS ACCESS CONTROL SYSTEM

RFID & BIOMETRICS ACCESS CONTROL SYSTEM The New Paradigm of Security www.idteck.com Headquarters: IDTECK Co., Ltd. 5F, Ace Techno Tower Bldg, 684-1 Deungchon-Dong, Gangseo-Gu, Seoul, 157-030, Korea Tel: +82-2-2659-0055 Fax: +82-2-2659-0086 Email: