PoE Digital Code Blue & Elapsed Timer Operation Guide

Transcription

1 PoE Digital Code Blue & Elapsed Timer Operation Guide OneVue PoE Managed Time OneVue is a trademark of Primex. OneVue is an intelligent environmental monitoring and managed time solution. All other trademarks are the property of their respective owners. Copyright 2018 Primex. The Primex logo is a registered trademark of Primex. All Rights Reserved. 4/30/2018 Primex, Inc. 965 Wells Street Lake Geneva, WI Phone:

2 Legal Notice Copyright 2018 Primex. All rights reserved. Printed in the USA. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical or otherwise, for any purpose, without the prior written permission of Primex. About Primex Primex is a leading provider of solutions that automate and maintain facility compliance, increase efficiencies, enhance safety and reduce risk for enterprise organizations in the healthcare, retail pharmacy, education, manufacturing and business vertical markets. The solutions delivered by Primex include Environmental Monitoring, Managed Time and School Bell Scheduling. Worldwide Headquarters 965 Wells Street, Lake Geneva, WI Phone: info@primexinc.com

3 CONTENTS Operate Digital Code Blue and Elapsed Timers 4 Code Blue Timer Operation 5 Code Blue Timer Operation 6 Battery Backup Mode Operation 7 Elapsed Timer Operation 8 Normal State - Timer Mode 9 Set State - Timer Mode 10 Technical Support 11

4 OPERATE DIGITAL CODE BLUE AND ELAPSED TIMERS Digital Code Blue Timer A Digital Code Blue Timer is a multifunction digital clock and timer that integrates with an existing facility Code Blue system to effectively time each event. When a Code Blue event is invoked, a relay pulse is sent from the code blue system to the timer, which triggers it to begin counting up. If a code blue status is in effect, it takes priority and the timer previous task runs in the background until the code blue function is stopped. The supplied timer switch control allows the user to operate the timer in multiple modes. Digital Elapsed Timer A Digital Elapsed Timer accurately counts up or counts down to a maximum of 99 hours, 59 minutes, and 59 seconds, and then capture and store event data for report generation. The supplied timer switch control allows the user to run, hold, or reset the timer when in elapsed or count down timer mode. When not in the elapsed timer mode, synchronized time is displayed. Timer Switch Control operation Switch control allows a user to run, hold, or reset the timer Designed to fit inside a single gang box (not included); boxes are typically x x 4 (11.45 cm x 6.99cm x cm) Cable connector is a 15 feet (4.6 m) reversed wire (cross-pinned) telephone cable with an RJ-11 connector Switch control can simultaneously activate two connected timers for even more accurate time management 4 PoE Digital Code Blue & Elapsed Timer Operation Guide

5 Code Blue Timer Operation Upon receiving a code blue system input, the clock immediately enters code blue mode and starts counting up from 00:00:00. Upon reaching 99:59:59, the code blue timer will beep for 3 seconds. Code blue mode is indicated by the colon, dash and decimal points not being lit (in both viewing and counting modes). Any other counting events remain operational in the background. Time duration of the last code blue event is stored in memory, and can be viewed until a new code blue event is triggered. A code blue count can be halted by pressing the STOP/START button. Pressing either DISPLAY or RESET is ignored while in code blue mode. Triggering of the code blue input while a current code blue event is counting is ignored. 5

6 Code Blue Timer Operation Pressing button.. Code Blue Event Mode Halted Mode DISPLAY EXIT RESET SET/CHANGE Places display back in clock mode Code Blue Timer models: holding down DISPLAY for a minimum of four seconds shows the last code blue time. STOP/START INCREMENT Hatls the code blue count at the moment the button is pressed Note: If the code blue counter reaches 99:59:59, the counter will stop. 6 PoE Digital Code Blue & Elapsed Timer Operation Guide

7 Battery Backup Mode Operation A Code Blue Timer has a power outage memory backup and will maintain the correct time for a minimum of 1 hour without power. When in battery backup mode, the timer operates as specified below. Pressing button... Clock Only Mode Count-Up Mode Count-Down Mode Code Blue Count Mode DISPLAY EXIT STOP/START Stops an active code blue count INCREMENT RESET SET/CHANGE Code Blue Count Mode Starts the code blue count Starts the code blue count Starts the code blue count Restarts the code blue count, but only if code blue count is stopped STOP/START 7

8 Elapsed Timer Operation The timer has two states that are managed by the timer control switch event buttons. Elapsed timer states Normal State: Controls the operation of the timer and is the text labeled on the top of the timer switch control buttons. Set State: Controls the setup of the timer and is the text labeled on the bottom of the timer switch control buttons. 8 PoE Digital Code Blue & Elapsed Timer Operation Guide

9 Normal State - Timer Mode The Normal State consists of three modes, including the clock mode, count-up mode, and count-down mode. In this state, the text labeled on the top of the switch control buttons are applicable (DISPLAY, STOP/START, RESET). Normal state operation display Clock Mode Count-Up Mode Count-Down Mode LED Display 10:45 02 Displays current time 0.0:00 00 Decimal lit after the 10hr digit 99: Decimal lit after the 1 sec digit Normal state operation Pressing the button... Clock Mode Count-Up Mode Count-down Mode DISPLAY EXIT Pressing DISPLAY scrolls through the various modes in the following order: 1. Clock mode 2. Count-up Mode 3. Count-down Mode STOP/START INCREMENT Controls the up counter while in count-up mode. If the counter is stopped, pressing the STOP/START button starts the counter. If the counter is started, pressing the STOP/START button stops the counter. Controls the down counter while in count-down mode. If the counter is stopped, pressing the STOP/START button starts the counter. If the counter is started, pressing the STOP/START button stops the counter. RESET SET/CHANGE Pressing the RESET button once automatically stops and resets the up counter to its preset time (pause). Pressing the RESET button once automatically stops and resets the down counter to its preset time (pause). Or Or Holding the RESET button puts the time into SET STATE. Holding the RESET button puts the time into SET STATE. 9

10 Set State - Timer Mode The Set State mode is used to set the count-up start time and the count-down start time. Enter Set State by holding the RESET button while in count-up or count-down mode. Set State operation Pressing the button... Start Count-Up Mode Start Count-Down Mode DISPLAY EXIT STOP/START INCREMENT RESET SET/CHANGE Exits Set State Increments the selected digit Holding the SET/CHANGE button for 3 seconds enters the set mode, which is indicated by : on the display. The selected digit will blink. Pressing SET/CHANGE again to select the next digit. Exits Set State Increments the selected digit Holding the SET/CHANGE button for 3 seconds enters the set mode, which is indicated by : on the display. The selected digit will blink. Pressing SET/CHANGE again to select the next digit. 10 PoE Digital Code Blue & Elapsed Timer Operation Guide

11 TECHNICAL SUPPORT You may require Technical Support when you have questions about product features, system configuration or troubleshooting. Support services are delivered in accordance with your organization's support agreement, end user licenses agreements, and warranties, either with a Primex Certified Sales and Service Partner or directly with Primex. Support through Primex Certified Sales and Service Partners Ensuring our customers experience excellent service is of utmost importance to Primex. Our network of Certified Sales and Service Partners offer technical support services for Primex products. If you have purchased Primex products or have a service agreement with a Primex Partner, they are your primary contact for all Technical Support inquires. When contacting Primex Technical Support Make sure you have satisfied the system requirements that are listed in your product documentation. Also, you should be at the computer or device on which the problem occurred, in case it's necessary to replicate the problem. When you contact Primex Technical Support, please have the following information available: Customer ID/Account Name Problem description/error messages Device hardware information Troubleshooting performed before contacting Primex Recent network changes Primex Technical Support Hours 8:00 a.m. to 5:00 p.m. CST Monday through Friday Phone: techsupport@primexinc.com Web: 11