UniCam High-Performance Connectors, Multimode and Single-Mode
|
|
|
- Loren Cunningham
- 6 years ago
- Views:
Transcription
1 Features and Benefits Broad operating temperature (-40 to +75 C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost Minimum insertion loss Optimum optical performance Performance assurance 100 percent yield assured Standards Intermateability Approval and Listings Connectors are FOCIS compliant with TIA/EIA A (LC); TIA/EIA (SC); TIA/EIA (ST Compatible Connectors) Passed EIA/TIA 568-B.3 Corning UniCam high-performance connectors offer best-in-class optical performance in a fast, easy field-termination solution. These high-precision zirconia ceramic ferrule connectors assured exceptional insertion loss 0.1 db typical/0.5 db maximum per connector pair for multimode, 0.2 db typical/0.5 db maximum per connector pair for single-mode. Installation of an LC, SC or ST compatible connector can be accomplished in about 50 seconds to one minute with the UniCam high-performance tool kit. The lightweight, hand-held installation tool and high-performance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fiber to the fiber stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam connector is assured to meet the published specification at the time of installation or Corning will replace it. UniCam High-Performance Multimode Connectors Photo CRR1245 UniCam High-Performance Tool Kit Photo LAN3334 Page 1 Revision date
2 False UniCam High-Performance Connectors, UniCam High-Performance SC Single-mode Connectors Photo CRR1247 UniCam Z-Pak Organizers Photo LAN1675 Specifications Multimode Connectors LC LC LC SC SC SC ST Compatible Fiber Category 62.5 µm MM (OM1) (OM2) (OM3/OM4 compatible) 62.5 µm MM (OM1) (OM2) (OM3/OM4 compatible) 62.5 µm MM (OM1) Insertion Loss, Typical Insertion Loss, Maximum Reflectance Housing Boot 0.1 db 0.5 db -26 db Beige Beige 0.1 db 0.5 db -26 db Black Black 0.1 db 0.50 db -26 db Black Aqua 0.1 db 0.5 db -26 db Beige Beige 0.1 db 0.5 db -26 db Black Black 0.1 db 0.5 db -26 db Black Aqua 0.1 db 0.5 db -26 db Amber Beige Page 2 Revision date
3 Multimode Connectors ST Compatible ST Compatible Fiber Category (OM2) (OM3/OM4 compatible) Insertion Loss, Typical Insertion Loss, Maximum Reflectance Housing Boot 0.1 db 0.5 db -26 db Amber Black 0.1 db 0.5 db -26 db Amber Aqua Single-Mode Polish Insertion Loss, Typical Insertion Loss, Maximum Reflectance Housing Boot LC SPC 0.2 db 0.5 db -40 db Blue white LC UPC 0.2 db 0.5 db -55 db Blue Blue SC SPC 0.2 db 0.5 db -40 db Blue white SC UPC 0.2 db 0.5 db -55 db Blue Blue ST Compatible SPC 0.2 db 0.5 db -40 db Amber white ST Compatible UPC 0.2 db 0.5 db -55 db Amber Blue Operating Temperature Durability Tensile Strength Jacketed Cable -40 C to 75 C exceeding EIA/TIA 568-B db change, 500 rematings, FOTP lb 0.2 db change on jacketed cable exceeds; 0.5 lb 0.2 db change on 900 μm cable; FOTP-6 LC Connectors X UniCam High-Performance Connector, LC, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, single pack, black housing, aqua boot X-Z UniCam High-Performance Connector, LC, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, organizer pack, black housing, aqua boot UniCam High-Performance Connector, LC, 50 µm multimode (OM2), ceramic ferrule, logo, single pack, black housing, black boot Z UniCam High-Performance Connector, LC, 50 µm multimode (OM2), ceramic ferrule, logo, organizer pack, black housing, black boot Page 3 Revision date
4 UniCam High-Performance Connector, LC, 62.5 µm multimode (OM1), ceramic ferrule, logo, single pack, beige housing, beige boot Z UniCam High-Performance Connector, LC, 62.5 µm multimode (OM1), ceramic ferrule, logo, organizer pack, beige housing, beige boot UniCam High-Performance Connector, LC, Singlemode (OS2), ceramic ferrule, logo, single pack, blue housing, blue boot Z UniCam High-Performance Connector, LC, Singlemode (OS2), ceramic ferrule, logo, organizer pack, blue housing, blue boot UniCam High-Performance Connector, LC APC, Singlemode (OS2), ceramic ferrule, logo, single pack, green housing, green boot Z UniCam High-Performance Connector, LC APC, Singlemode (OS2), ceramic ferrule, logo, organizer pack, green housing, green boot SC Connectors X UniCam High-Performance Connector, SC, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, single pack, black housing, aqua boot X-Z UniCam High-Performance Connector, SC, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, organizer pack, black housing, aqua boot UniCam High-Performance Connector, SC, 50 µm multimode (OM2), ceramic ferrule, logo, single pack, black housing, black boot Z UniCam High-Performance Connector, SC, 50 µm multimode (OM2), ceramic ferrule, logo, organizer pack, black housing, black boot UniCam High-Performance Connector, SC, 62.5 µm multimode (OM1), ceramic ferrule, logo, single pack, beige housing, beige boot Z UniCam High-Performance Connector, SC, 62.5 µm multimode (OM1), ceramic ferrule, logo, organizer pack, beige housing, beige boot Page 4 Revision date
5 UniCam High-Performance Connector, SC, Singlemode (OS2), ceramic ferrule, logo, single pack, blue housing, blue boot Z UniCam High-Performance Connector, SC, Singlemode (OS2), ceramic ferrule, logo, organizer pack, blue housing, blue boot UniCam Standard-Performance Connector, SC APC, Single-mode (OS2), ceramic ferrule, logo, single pack, green housing, green boot Z UniCam Standard-Performance Connector, SC APC, Single-mode (OS2), ceramic ferrule, logo, organizer pack ST Compatible Connectors X UniCam High-Performance Connector, ST Compatible, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, single pack, amber housing, aqua boot X-Z UniCam High-Performance Connector, ST Compatible, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, organizer pack, amber housing, aqua boot UniCam High-Performance Connector, ST Compatible, 50 µm multimode (OM2), ceramic ferrule, logo, single pack, amber housing, black boot Z UniCam High-Performance Connector, ST Compatible, 50 µm multimode (OM2), ceramic ferrule, logo, organizer pack, amber housing, black boot UniCam High-Performance Connector, ST Compatible, 62.5 µm multimode (OM1), ceramic ferrule, logo, single pack, amber housing, beige boot Z UniCam High-Performance Connector, ST Compatible, 62.5 µm multimode (OM1), ceramic ferrule, logo, organizer pack, amber housing, beige boot UniCam High-Performance Connector, ST Compatible, Single-mode (OS2), ceramic ferrule, logo, single pack, amber housing, blue boot Z UniCam High-Performance Connector, ST Compatible, Single-mode (OS2), ceramic ferrule, logo, organizer pack, amber housing, blue boot Page 5 Revision date
6 Tool Kits and Accessories Part Number Product Description Units per Delivery TKT-UNICAM-PFC UniCam High-performance Tool Kit: includes Highperformance Installation Tool for termination of multimode and single-mode LC, SC and ST Compatible Connectors; includes High-performance Precision Flat Cleaver, 1.25 and 2.50 mm VFL ferrule adapters and all required fiber preparation, cleaning tools and materials TKT-UNICAM Standard Installation Tool Kit for single-fiber UniCam Connectors, terminates LC, SC and ST Compatible Connectors; includes FBC-002 basic cleaver, continuity test set (CTS) with adapters; includes all required fiber preparation, cleaning tools and materials FBC-007 UniCam High-Performance Precision Flat Cleaver HAN-TRACK Fiber Handlers and Track for UniCam and OptiSnap Flat Cleavers HAN-UNI Fiber Handler for fan-out tubing and direct 250 µm applications. HAN-STANDARD Double-sided Fiber Handler for tight-buffered 900 µm and jacketed cable for UniCam High-Performance flat cleaver FBC-007 FBC BLADE Replacement Diamond Blade for the High-performance Precision Flat Cleaver VFL-A125 LC VFL adapter for 1.25 mm ferrules (for UniCam High- Performance Installation Tool only) VFL-A250 SC and ST Compatible VFL Adapter for 2.5 mm ferrules for UniCam High-performance Installation Tool only Page 6 Revision date
7 Tool Kits and Accessories Part Number Product Description Units per Delivery VFL-AKIT UniCam VFL Adapter Kit for High-performance Installation Tool TER-CTS-LC CTS Adapter for UniCam LC Connectors TER-CTS-SC CTS Adapter for UniCam SC Connectors TER-CTS-ST CTS Adapter for UniCam ST Compatible Connectors VFL-350 Visual Fault Locator, 635 nm penlight style TL-UC01 UniCam Standard-performance Installation Tool TL-UCP UniCam High-performance Connector Installation Tool with integrated continuity test set (CTS) Page 7 Revision date
8 Cleaning Accessories Part Number Product Description Units per Delivery FCC-WIPES Lint-free Cleaning Wipes, canister of 90 90/1 FCC-CLEANER-FIBER Fiber Optic Cleaning Fluid, 3 oz can CLEANER-PORT-2.5 Single-fiber Port Cleaner for all 2.5 mm ferruled connectors such as FC, SC and ST Compatible Connectors; effective for PC, UPC and APC polishes CLEANER-PORT-1.5 Single-fiber Port Cleaver for 1.5 mm ferruled LC connectors Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: A complete listing of the trademarks of Corning Cable Systems is available at Corning Cable Systems is ISO 9001 certified Corning Cable Systems. All rights reserved. Page 8 Revision date
Anaerobic-Cure Connectors
Features and Benefits Quick-cure epoxy No lamps or ovens needed Minimal tools and no index-matching gel Low installation cost Hand polished for minimum insertion loss Reliability and optical performance
UniCam Connector Installation Tool Kits
features and benefits Terminates single-mode and multimode fibers Convenient carrying case Continuity test set (CTS) Visual feedback signal (TKT-UNICAM-PFC) Pretium Cleaver (FBC-05) SPECIFICATION SHEET
Field-Installable Fiber Optic Connector Tool Kits
features and benefits Rugged cases Foam padding Nylon packs Tool protection Neat and organized Job site convenience UniCam High-Performance Tool Kit Photo LAN3333 Basic UniCam Connector Installation Tool
UniCam Connector Installation Tool Kits
Applications UniCam Connector installations Local area networks (LANs), including main cross-connect, telecommunications room and telecommunications enclosures Fibre-to-the-desk Data centres Description
Heat-Cure Single-Fiber Connectors A LANscape Solutions Product
Applications Field or factory installations requiring high optical performance Cable Assembly House, OEM and Manufacturing Environments Multiple terminations where material cost is the main consideration
CORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR SIMPLEX OPTICAL FIBER (MULTIMODE) NO-EPOXY, NO-POLISH CONNECTORS
CORNING OPTICAL COMMUNICATIONS GENERIC SPECIFICATION FOR SIMPLEX OPTICAL FIBER (MULTIMODE) NO-EPOXY, NO-POLISH CONNECTORS October 2017 PGS028 Revision 12 Corning Optical Communications reserves the right
FuseLite Single-Fiber Splice-On Connectors
features and benefits Broad operating temperature (-40 to +75 C) Factory-polished end face Fusion splice connectivity Splice protection within connector body (03U and 04U) SPECIFICATION SHEET LAN-1455-AEN
Plug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
EC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
CONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
Product Bulletin PB 308
Product Bulletin PB 308 FiberExpress Brilliance Field-Installable Connectors Brilliant in design and implementation, FiberExpress Brilliance Field-installable Connectors make fiber termination simple and
Pre-polished Connector Insertion Loss and Termination Yield. Achieving High Termination Yields And Low Insertion Loss Values
Pre-polished Connector Insertion Loss and Termination Yield Achieving High Termination Yields And Low Insertion Loss Values White Paper 1/2004 Executive Summary Pre-polished connectors offer a quick and
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System
Data Center & Cloud Computing Infrastruture Solutions DATASHEET MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System REV.2.0 2018 MTP/MPO Breakout Cable 01 Description MTP/MPO breakout assemblies
EDGE Solutions Trunk Cable, SMF-28 Ultra OS2, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
SC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing
Introduction As the industry s leading supplier of single-mode cable assemblies, Optical Fiber offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high
Pretium EDGE Solutions Harness, 12 fibres,
Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in
FlexNAP Outside Plant System
Features and Benefits Factory-installed, sealed splice points (2, 4, 6, 8 or 12 fibers per tether) Drastically reduces field splicing with a predetermined loss at each waterproof tether attachment point
EDGE Solutions Hybrid Trunk, OM4, Low- Loss, MTP to LC Duplex Uniboot, 24 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
features and benefits
features and benefits Touch screen with graphical user interface Built-in interactive training videos Equipped with both LID System and CDS System 3-axis core-alignment technologies Fastest total splice
Pretium EDGE Solutions Trunk Cable, 50 µm multimode (OM3)
Pretium EDGE 133 Pretium EDGE Solutions Trunk Cable, 50 Pretium EDGE Solutions trunk cables utilize the MTP Connector, a 12 -fiber push/pull optical connector with a footprint similar to the SC simplex
Closet Connector Housings (CCH)
features and benefits Interconnect and crossconnect capability Removable, translucent top covers (1U, 2U, 3U), removable rear cover (4U) Internal and external strain-relief options Accepts panels, modules
features and benefits
features and benefits Touch screen with graphical user interface Built-in interactive training videos 3-axis core-alignment by the CDS system Fastest total splice cycle time in the industry Two USB ports
Connector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
LTK-400 Series Optical Sources, Meters and Kits Without Data Storage Capabilities
Features and Benefits High output power and calibrated wavelengths Easy to use, unparalleled performance Rugged handheld design Capable of enduring harsh testing environments Product warranty and calibration
Pretium EDGE HD Solutions A LANscape Pretium Solutions Product
Pretium EDGE HD Solutions for Enterprise Data Centers and Storage Area Networks Corning Pretium EDGE HD solutions create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs)
Plug & Play Universal Trunks
1 1 22.88 115 0 Plug & Play 0 Plug & Play Universal Trunks Plug & Play Universal Systems MTP Trunks provide the backbone of the Plug & Play System. With non - pinned MTPs on both ends of the cable, these
3M Fiber Interconnect Solutions. The Network of Networks. High. Performance. Fiber Connections
3M Fiber Interconnect Solutions The Network of Networks High Performance Fiber Connections The future is fiber. And 3M fiber interconnect solutions are leading the way. A complete family of high-performance
PATCH-CORD. SC Patch-Cord APPLICATIONS AVAILABILITY FEATURES SPECIFICATIONS. Active device termination Local Area Networks (LANs)
SC Patch-Cord APPLICATIONS CATV Metro Test equipment Active device termination Local Area Networks (LANs) Premise installations Telecommunicatio n networks Data processing networks Wide Area Networks (WANs)
EDGE Solutions Trunk Cable, OM4, Low- Loss, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
Pretium EDGE Solutions Trunk Cable, OM3, Low-Loss, MTP to MTP, 24 fibres
Corning LANscape Pretium EDGE (Evolved-Density, Growth -Enabled) solutions are high -density preterminated optical cabling systems that simplify installation and improve performance in data centre environments.
RoHS. OptiSplice One Handheld Fusion Splicer A LANscape Pretium Solutions Product. Corning Cable Systems
Applications Local area networks, industrial and telco networks Restoration and installation of single fibers Locations with limited workspace As a part of an emergency restoration plan Description OptiSplice
Applications Engineering Notes. The US Conec MTP Multifiber Connector
Applications Engineering Notes Document Title Document Number The US Conec MTP Multifiber Connector AEN-1909 Revision Number Rev 2.0 Effective Date June 1, 2008 1.0 Document Purpose The purpose of this
Wall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
ProCliCk Pre-Polished ConneCtors
ProCliCk Pre-Polished ConneCtors Termination Insert fiber and activate clamp in one simple motion. Precision Low Loss, High Yield Pre-Polished Connector Terminate in Less than 60 Seconds CSI, Drawings
Pretium EDGE FX Solutions
Pretium EDGE FX Solutions for Enterprise Data Centers and Storage Area Networks Corning Cable Systems Pretium EDGE FX Solutions create a fixed-tray fiber optic tip-to-tip solution for Data Centers and
Pretium EDGE Solutions Trunk Cable, OM4, Low-Loss, MTP to MTP, 24 fibres
Corning Cable 143 Pretium EDGE Solutions Trunk Cable, OM4, Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems
LC Connectors and Adapters
, Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements
Product Catalogue. Fibre Optic Components
Product Catalogue Fibre Optic Components version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients
Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue
One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter
Plug & Play Universal Systems
100G Ready performance Maximum skew of 0.75 ns Product is assured to work in parallel optic applications for Ethernet, Fibre Channel and InfiniBand MTP /LC Duplex Module TRAINING SPLICE EQUIPMENT High-density
Expanded SECURE Connector Product Line Includes MPO and LC Interfaces
Expanded SECURE Connector Product Line Includes MPO and LC Interfaces Ten variants in ten colors offered in two new interfaces Tyco Electronics has expanded its SECURE connector product offering to include
Communication Markets Division. 3M Fiber Connectors
Communication Markets Division 3M Fiber Connectors 3M Communications. Bringing the world s networks together. Headquartered in Austin, Texas, 3M s Communication Markets Division creates technology that
Emerging Fiber Termination Solution
n BICSI U.S. NE Region Meeting March 1, 2007 Agenda Introduction Connectorization New solution: Splice-on Connector Applications Features and Procedure Demonstration Conclusion Where connectors show up
LC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. Standard Fiber Patch Cable. Make high-speed Ethernet network equipment connections
Data Center & Cloud Computing Infrastruture Solutions DATASHEET Standard Fiber Patch Cable Make high-speed Ethernet network equipment connections 1 Description Fiber optic patch cables are ideal for supporting
White Paper. FASTConnect or FUSEConnect Which Should You Choose? ABSTRACT INTRODUCTION. Tom Jeffers, Associate Product Manager, AFL
FASTConnect or FUSEConnect Which Should You Choose? Tom Jeffers, Associate Product Manager, AFL ABSTRACT Field-installable connectors provide a convenient method for terminating fiber optic cable at remote
FiberExpress Brilliance Connectors
FiberExpress Brilliance Connectors Installation Guide PX105234 Table of Contents Section A - What s New and What You Need to Know 02 Section B - Components and Features 04 Section C - Fiber Preparation
Plug & Play Universal Systems
Corning Cable Systems Plug & Play Universal Systems create a fiber optic tip-to-tip solution for data centers and storage area networks (SANs) consisting of housings, modules, panels, harnesses, trunks
Plug & Play Universal Low-Loss Systems A LANscape Pretium Solutions Product
Applications Data Center LAN/SAN Enterprise Building Backbone -to-the-desk Description Plug & Play Universal Systems are preterminated optical fiber cabling systems designed to dramatically improve performance
OTS-400 Series Optical Sources, Meters, Testers and Kits with Data Storage Capabilities A LANscape Solutions Product
Applications Testing and troubleshooting of various telecommunication networks Description The Corning Cable Systems OTS-400 Series of intelligent and versatile optical meters, sources and testers offers
OTS-600 Series Optical Sources, Meters, Testers and Kits with Data Storage Capabilities
features and benefits Large LCD screen and soft key menus Source and meter in one unit Auto wavelength switching and detection USB data ports OTS-600 Series Light Source and Power Meter Photo LAN1193 Ease
OptiTect Indoor Local Convergence Cabinet, Gen III Series
Features and Benefits Industry-leading cabinet size Significant freight, storage and installation efficiencies Full factory-stubbed cabinets Enables quicker installation and rapid emergency restoration
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
Closet Connector Housings (CCH)
Closet Connector Housings (CCH) Designed based on thousands of hours of customer feedback, Corning closet connector housings (CCHs) offer more than two dozen innovative features that make installation
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
Fiber Optic Adapters/Interconnect Sleeves A LANscape Solutions Product
Applications Cable assembly house and manufacturing environments Local area networks at the workstation outlet Description To complement our complete offering of factory- and fieldinstallable connectors,
DIGITUS Fiber Optic Splice Box, 1U, basic housing, color grey (RAL 7035) or black (RAL 9005)
DIGITUS Fiber Optic Splice Box, 1U, Basic Housing Basic housing for splice box assembly Sturdy housing Sliding Available in colors grey and black Abstract DIGITUS Fiber Optic Splice Box, 1U, basic housing,
Closet Connector Housing (CCH) Splitter Module
Closet Connector Housing Features and Benefits Gen III FTTx Splitter with bracket to fit LANscape Solutions housings Enables passive optical network (PON) design with existing LANscape Solutions housings
Wall-Mountable Connector Housings (WCH)
Features and Benefits Interconnect and cross-connect capabilities Ideal for field splicing and connectorization Accepts CCH cassettes, panels and modules Variety of preterminated and field-installable
Data Center & Cloud Computing Infrastructure Solutions DATASHEET. MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System
Data Center & Cloud Computing Infrastructure Solutions DATASHEET MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System REV.1.0 2018 MTP MPO Cassette 01 Description FS.COM Fiber Optic
OTS-400 Series Optical Meters, Sources and Testers A LANscape Solutions Product
OTSK-4MDSD Specs Provided by www.aaatesters.com OTS-400 Series Applications Installation, testing and troubleshooting of LAN, telco, CATV and FTTx networks Description The OTS-400 Series of intelligent
OptiSheath MultiPort Terminal
Features and Benefits OptiTap cable assembly connector ports for customer drop terminations Lower installation cost and increase speed of customer connection Available stubbed or preterminated with OptiTip
3M Fibrlok Optical Splice System
3M Fibrlok Optical Splice System The 3M Fibrlok Optical Splice is one of the leading mechanical splices and is now specified in fiber-to-the-premises projects as a substitute for fusion splicing. It provides
FEATURED PRODUCTS SC & LC MINI BOOTS LC-HD TOP ADAPTER XP-SERIES LC SWITCHABLE UNIBOOT IP-SERIES LC-KEYED FLEX BOOTS PLC-WDM
LC-HD FEATURED PRODUCTS SC & LC MINI BOOTS SC & LC TOP ADAPTER IP-SERIES LC SWITCHABLE UNIBOOT XP-SERIES LC-KEYED SC & LC FLEX BOOTS PLC-WDM LC-HD CONNECTOR LC HD HIGH DENSITY CONNECTOR The SENKO LC-HD,
March 2018 OM1 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M OM4 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M OS2 SINGLEMODE DUPLEX FIBRE OPTIC CABLE 500M
Bulk Fibre Optic Cables & Accessories OM1 MULTIMODE DUPLEX FIBRE OPTIC CABLE 500M ZIPCORD TYPE 1Gbps 62.5/125 500M OPOM1-500 $392.00 Fibre Buffer Jacket Kevlar yarn OM4 MULTIMODE DUPLEX FIBRE OPTIC CABLE
LX3 High Density LGX 1U Patch Panel
LX3 High Density LGX 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette modules
Cables Fiber & Copper
Updated in 2017 Free Product Guide for Your Network Cables Fiber & Copper Catalog FS.COM Fiber & Copper Cable This catalog is a guide of FS.COM fiber and copper cables including standard LC/SC patch cables,
RMG Series Rack Mount Fiber Enclosures
The RMG Series rack mount fiber enclosures is as an integral part of the TE Connectivity product portfolio. The RMG Series fiber enclosure provides rugged and durable protection for patching or splicing
Corning Distance and Link-Loss Budgets for the Cisco 40GbE BiDi Transceiver
9 0 Corning Distance and Link-Loss Budgets for the Cisco 0GbE BiDi Transceiver This paper discusses the following topics for the Cisco bidirectional (BiDi) transceiver: Cisco quad small-form-factor pluggable
SPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
A wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
EDGE8 MTP Trunk Cable
The EDGE8 trunks utilise 8 -fibre push/pull optical connectors that are pinned on both ends of the cable. The trunks are shipped with strain -relief clips that allow for tool -less installation in EDGE8
TrueNet TFP Series Rack Mount Fiber Panels
TFP Series Rack Mount Fiber Panels The rack mount TrueNet Fiber Panel (TFP) is an integral part of the TrueNet Fiber product portfolio. The TFP fiber panels can be ordered in one, two and five rack unit
Construction Materials. Dimensions. Environmental Specifications. General Specifications. Mechanical Specifications
760184002 TeraSPEED LC to SC, Fiber Patch Cord, 1.6 mm Simplex, Plenum Total Fibers, quantity 1 TeraSPEED, zero water peak singlemode fiber (G.652.D, G.657.A1 or G.652.D, G.657.A1 OS2) Dimensions Cord
Closet Connector Housing Panels (CCH-CP) A LANscape Solutions Product
Applications The panels are used with field-installable connectors or in applications where the preconnectorized cables are routed directly from the equipment to the piece of interconnect hardware Provides
1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
LC Connectors. Fiber Optic Products Catalog. One-Piece LC Connector Product Facts
44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy
HDCi LX3 High Density 4U Patch Panel
HDCi LX3 High Density 4U Patch Panel An innovative 4U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 576 fibres using MTP optical cassette
HDCi LX3 High Density 1U Patch Panel
HDCi LX3 High Density 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette
COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, SINGLE FIBER, SMALL FORM FACTOR, LC TYPE
METRIC A-A-59940/ 9 ovember 203 COMMERCIAL ITEM DESCRIPTIO SPECIFICATIO SHEET COECTORS, FIBER OPTIC, SIGLE FIBER, SMALL FORM FACTOR, LC TYPE The General Services Administration has authorized the use of
OptiSheath Aerial Terminal, SCA-9T Series
Features and Benefits Design includes aerial hanging brackets Easy installation Quick-release clamps Easy terminal re-entry Individual strain-relief Fiber protection and continuity Cable sealing and reusable
General SC F728 & FC F729
General SC F728 & FC F729 Radiall, thanks to its new range of SC and FC connectors has greatly improved these traditional fiber optic connectors in terms of technology and reliability. One-piece connector
SPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
Pre-terminated Multi Fibre Cable Assemblies
AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options.
LC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories
A High Density Fiber Optic Network Solution Paul Kolesar Lucent Technologies, Bell Laboratories IEEE 802.3z Gigabit Ethernet March, 1997 Outline Design Background and Goals Product Family Overview Features
OPTICAL FIBER SOLUTIONS
FUSION SPLICERS FITEL Featured Products Fusion Splicing Machines & More www.ofsoptics.com OPTICAL FIBER SOLUTIONS FOR FUSION SPLICING Optical fiber plays a critical role in today s communication networks
Plug & Play AnyLAN Systems A LANscape Solutions Product
Description Corning Cable Systems Plug & Play AnyLAN Systems is a preterminated local area network cabling solution that can be installed up to 50 percent faster per splice or termination point than traditional
Polymer Coated Fiber Cable (PCF)
Polymer Coated Fiber Cable (PCF) Panduit has introduced a Polymer Coated Fiber (PCF) to their fiber cable offering available in 50µm and 62.5µm core diameters. Along with this cable having a stronger durability
Centrix Platform. Features and Benefits
Features and Benefits Supports 4,320 LC or 2,880 SC ports per frame Saves space through increased port density Available in rear cable acces Designed in compliance with GR-449-CORE, Issue 3 standards Modular
FUSION SPLICERS Splicing Made Easy and Affordable
PRODUCTS 2018 FUSION SPLICERS Splicing Made Easy and Affordable Ilsintech s fiber optic fusion splicers provide best-in-class optical performance with a simplistic design, making installs for any application
Advanced Fiber Optic Connector Installation
Advanced Fiber Optic Connector Installation QUICK SUMMARY Length: 48 hours, 52 hours with Fiber Optic Association CFOT certification Hands-on Activities: activities, 70-75 % Text/Field Reference: Professional
Optical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
Opt-X Enterprise Fiber Trunk Cables
APPLICATION Factory-terminated and tested fiber trunk cables connect central patching locations to zones or pods. Available terminated with both modular (MTP ) and discrete connectors, these trunks are
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS MFS & Fan-Out cords PC/APC MULTIMODE PC The Diamond Multiple Fiber System (MFS)combines Diamond`s advanced polishing technology and the flexibility
MTP Outdoor Cabling System
The AFL MTPE (MTP Elite) Low Loss outdoor cabling system offers a market leading, low loss, fast and efficient connection system for underground (UG) and outside plant applications. These assemblies offer
RIFOCS Corp. Component Services Division
RIFOCS Corp. Component Services Division Overview The Components Division is one of four business units within RIFOCS Corporation. The other three divisions are Instruments, Harsh Environments, and International.
Cable Assemblies. Corning Cable Systems. An Evolant Solutions Product
Description As the industry s leading supplier of single-mode cable assemblies, offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high-fiber-count
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
TrueNet WMG Series Wall Mount Fiber Enclosures
The TrueNet WMG Series wall mount fiber enclosures are ideal for LAN applications requiring a fully enclosed and lockable wall mount enclosure. The cabinets are one or two door direct termination and splice
LTS-2A LTS-10 LTS-10C LTS-11 LTS-12
Optical Loss Test Kits LTS-2A LTS-10 LTS-10C LTS-11 LTS-12 Description Fit your application to your budget. Our Optical Loss Test Kits, and Fiber Test Kits combine the dependability and accuracy of our