LC Connectors. Fiber Optic Products Catalog. One-Piece LC Connector Product Facts

Transcription

1 44 One-Piece LC Connector Singlemode Telecordia GR-326 tested (Report #50-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy adhesives Universal Connector Body Common body for simplex or duplex Common body for jumper or buffer applications Fewer parts to inventory Duplex Clip Field installable Makes simplex assemblies duplex Correct polarity errors Used for both jumpers and buffered fiber applications One-Piece Body Improved rigidity Improved side-load strength ( shown) Fiber Optic Products Catalog LC Connectors Widened Thumb Latch coded to comply with 568 C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode LC Connector Kits Duplex Clip Widened Thumb Latch Increased hit area Increased bend strength Ramped front latch for snag resistance Diamond Knurled Crimp Body Increased tensile proof strength Identical to Tyco Electronics SC/FC design Universal One-Piece Connector Body Diamond Knurled Crimp Body Insertion Loss 0.2 db Typical Reflectance -55 db Typical Operating Temperature -40 C to +75 C Durability 500 Cycles Fiber Type Boot Used with Individual Pack Bulk Pack 900 µm Buffered Singlemode Blue Blue mm Jacketed mm Jacketed µm Buffered Beige Aqua mm Jacketed Simplex 3.0 mm Jacketed µm Buffered Multimode Beige Black mm Jacketed mm Jacketed µm Buffered Beige Beige mm Jacketed mm Jacketed µm Buffered Singlemode Blue Blue mm Jacketed mm Jacketed µm Buffered Beige Aqua mm Jacketed Duplex 3.0 mm Jacketed µm Buffered Multimode Beige Black mm Jacketed mm Jacketed µm Buffered Beige Beige mm Jacketed mm Jacketed Duplex Clip For use with Simplex Kits Black

2 One-Piece LC Connector Family 3.0 Jacket LC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories mm Jacket LC Connector Component Selection Chart (bulk packaged) 250 / 900 µm Buffered Fiber Fiber Type Simplex Connector Crimp Eyelet Strain Relief Strain Relief Assembly & Duplex Clip Cable Size with Heat Shrink Crimp Eyelet Dust Cap (see chart below) mm Straight/Bend Limiting X mm Angled X mm Degree Angle X Singlemode mm Straight/Bend Limiting X (blue hsg.) 2.4 mm Angled X 2.4 mm Degree Angle X 3.0 mm Straight X 900 µm 900 µm Buffer, 0 mm X mm Straight/Bend Limiting X mm Angled X mm Degree Angle X Multimode mm Straight/Bend Limiting X (beige hsg.) 2.4 mm Angled X 2.4 mm Degree Angle X 3.0 mm Straight X 900 µm 900 µm Buffer, 0 mm X Crimp Tool Dieset only Crimp Tool with Dieset Instruction Sheet: Note: All of the above are also available in simplex. Termination Kit Upgrade Kit for Anaerobic terminations X X X X Strain Relief Base Part Number Beige Blue Black Red Aqua

3 Tight Jacketed LC Connectors Multimode or singlemode Simplex or duplex Tested using MIL-PRF /6 2.0 mm cable LC Commercial Item (CID) interim approval by the Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market LC Connectors (Continued) The tight jacketed LC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 52.0 [2.05] Ref. Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Fiber Type Kit X Simplex, mm Singlemode (blue body & straight boot) X Duplex, mm X Simplex, 2.4 mm X Simplex, mm Multimode (beige body & straight boot) X Duplex, mm 9853-X Simplex, 2.4 mm Note: X = - for individual package, -2 for bulk package. Instruction Sheet See Duplex Clip Available ( ). 46

4 LC Connectors (Continued) Short Boot LC Connector Overall LC connector length 42.5 mm (compares to 52 mm standard product) Multimode or singlemode Simplex or duplex Anti-snag rear connector latch For.6 mm to 2.4 mm cable GR-326 Small Form-Factor Performance Requirements The short boot LC connector provides GR-326 level performance while reducing ferrule tip to boot length to 42.5 mm. The 20% reduction in length is ideal for installing in cabinets or other enclosed spaces, protecting against potential mechanical damage from closed cabinet doors. Connectors/Adapters/ Tooling & Accessories Bend Limiting Boot Crimp Eyelet / Heat Shrink Assembly Connector Subassembly Protective Cover Fiber Type Kit Singlemode (blue body & X Simplex, mm straight blue boot) X Duplex, mm Multimode (beige body & X Simplex, mm straight beige boot) X Duplex, mm Note: X = - for individual package, -2 for bulk package The boot (98403-X) is also sold separately, for use with any Tyco Electronics LC connector [.850] Ref Ref. [.673] 3.95 [.258] Ref Adapter Ref Ref. Not Included in Kit [.08] 47

5 LC Connectors (Continued) Wide Latch Multimode KRONE Universal Adapter Narrow Latch Multimode Narrow Latch LC Connector One-piece housing Reduced thumb latch for tight interconnections Mates with Krone universal.25 mm adapter Multimode or singlemode Duplex through use of clip ( ) Anti-snag rear connector latch Subassembly can be used with 900 µm to 3.0 mm cable GR-326 Small Form Factor Performance Narrow Latch Singlemode The reduced thumb latch on this connector provides superior performance when space is limited by maintaining all of the other features of the Tyco Electronics LC connector. Crimp Eyelet / Heat Shrink Assembly (Not sold through Tyco Electronics) Bend Limiting Boot Wide Latch Singlemode Connector Assembly Protective Cover Fiber Type Kit Singlemode (Blue Body & Straight Blue Boot) X Simplex, mm Multimode (Beige Body & Straight Beige Boot) X Simplex, mm Note: X = - for individual package, -2 for bulk package [2.047] Ref. 48 KRONE is a trademark of KRONE Optical Systems, Inc.

6 LC/SC Flexible Boot Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC and Controls cable radius in limited space environments For use with.6 to 2.4 mm multimode or singlemode cable Requires crimp eyelet with heat shrink ( X or ) LC Connectors (Continued) Base Beige Blue Black Red Connectors/Adapters/ Tooling & Accessories LC/SC 900 µm GR-326 Style Boot Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC parts and Provides bend limiting support For use with 900 µm multimode or singlemode fiber Base Beige Blue Black Green

7 LC Adapters LC Duplex Adapter for SC Cutout Plastic Flanged Beige Black Aqua Metal Blue Beige Flangeless Black Aqua Beige Black Flanged Aqua Blue Ceramic Green Beige Black Flangeless Aqua Blue Green LC Duplex Adapter for LC Cutout Plastic Metal Ceramic LC Adapter for SC Cutout Metal Flanged Ceramic Flangeless Electroless Flangeless w/ Nickel EMI Shielding LC Simplex Adapter Plastic Ceramic Duplex Sr-Jr Duplex Sr-Sr Duplex Sr-Jr Duplex Sr-Sr Beige Blue Beige Blue Beige Blue Beige Blue Simplex Beige Adapter Blue Ø 2.5 [.098] 8.0 [.709] Recommended Panel Cutout Max. Panel Thk..70 [.067] Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] [ ] [.52.53] M2 x 0.4 or 2-56 UNC When Required Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] [ ] [ ] M2 x 0.4 or 2-56 UNC When Required [.52.53] [ ] 8.0 [.709] [ ].7.8 [ ] Recommended Panel Cutout Panel Thk..2/.7 [.047/.067] LC Quad Adapter Plastic Flanged Metal Flanged Beige Ceramic Flanged Blue Recommended Panel Cutout Max. Panel Thk..7 [.067]

8 Singlemode and multimode product range For digital network applications PC end face available on both singlemode and multimode connectors For analog network applications, APC end face available on singlemode connectors (8 ) Connector design uses.25 mm ceramic ferrule technology Polarized for precise insertion Factory terminated cable assemblies LSZH sheathed cable available High optical performance (low insertion, high return loss) High density (up to 8 lines per module) Insertion Loss 0. db Typical Reflectance -55 db Typical Operating Temperature -25 C to +75 C Durability 500 Cycles MU High Density Connectors Tyco Electronics MU high density fiber optic interconnection system offers a solution for high performance telecommunications networking. The system centers around the fully standardized MU connector, which is also sometimes known as the Mini SC. The MU connector is at least half the size of the standard SC connector. It can offer twice the port density but all the optical performance of traditional fiber optic connectors. Featuring a similar latching mechanism to the SC connector, the MU is just as easy to connect and disconnect. The MU system includes a complete range of multimode and singlemode pre-terminated cable assemblies; bulkhead adapters; backplane housings; system card housings; connector kits; termination tooling and customer polishing processes. Connectors/Adapters/ Tooling & Accessories Key Applications Front Panel I/O and High Density Patch Panels for Optical Transmission Equipment, Optical Distribution Frames and Optical Network Units. Full range of simplex, duplex and 8 position bulkhead adapters coded adapters for ease of identification Tuneable versions available to achieve lower insertion losses Push-pull type latching mechanism Fully compliant with relevant IEC standards (IEC , CECC ) Exceeds ETSI performance requirements (ETSI Grade P) Back Panel I/O in Optical Transmission and Switching Equipment 8 position Type L optical modules available 2.0 mm misalignment pickup tolerance during mating Zero force on backplane when fully mated FOKIT MU SM PC /.0 FOKIT MU SM PC /.0 FOKIT MU SM PC 25 µm, 2.0 mm FOKIT MU SM PC 26 µm, 2.0 mm Zero tensile load on daughter card when fully mated Constant mating force during 2.5 mm free float Fully compliant with IEC 6097 and IEC MU Standards Compliance Product range MU cable assembly Applicable standards IEC CECC (MU-APC) I-ETS IEC 6300 Product range Z-PACK 2 mm HM Product Applicable standards IEC 6097 IEC Note: are RoHS compliant except: Indicates non-rohs compliant. 5

9 MU High Density Connectors (Continued) MU Bulkhead Adapter The MU bulkhead adapter is designed to help save valuable panel space in high density applications. The adapter enables the interconnection of two MU connectors and features a.25 mm ceramic alignment sleeve to ensure precise fiber alignment and low insertion loss, both during and after the interconnection process. The MU bulkhead adapter is available in PC and APC versions for both digital and ana- log network applications. It is also available in a choice of simplex, duplex and 8 position versions. PC finish Simplex MU Adapter Duplex MU Adapter Duplex MU Adapter with SC cut-out APC finish Duplex MU Adapter with SC cut-out Z-PACK 2 mm HM Type L and M Connector s Z-PACK 2 mm HM connector housings offer a solution to the demand for discrete fiber lines, allowing single disconnects and routing on the backplane. The 8 position Type L connector housing is fully optical and can accommodate up to 8 fiber lines. These connector housings are available in female configurations and are designed for use on the system card. The hybrid Type M connector housing combines optical and electrical contacts in one housing, with 55 signal contact positions and 4 fiber optic lines. It allows easy migration from combined optical / electrical to full optical backplane inter-connections. Female Type M connector housings are suitable for use on the system card while male Type M connector housings are designed for back panel application. Tyco Electronics also designs and manufactures a range of MT based fiber optic backplane connectors, LIGHTRAY MPX fiber optic backplane connectors. For further information, see Cable Assemblies & Backplane Interconnects Section 2, pages Type L Male Female HM : Hard Metric 52 MU Backplanes Complies to IEC 6097 and IEC Constant mating force during 2.5 mm free float Zero tensile load on system card and backplane when fully mated Low insertion / extraction forces Scalable system allows easy implementation of future upgrades Low loss High return loss APC versions available Float in all directions (including x and y) Misalignment pick up tolerances 2.0 horizontal, 2.5 mm vertical, and 2 degrees angular 2 Position Backplane (includes mounting bracket) Systemcard Position Backplane (includes mounting bracket) 396- Systemcard Note: Future product extensions planned: 6 position and 8 position versions. Please contact your local Sales Engineer for additional information. Note: are RoHS compliant except: Indicates non-rohs compliant.

10 One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 25 µm cladding diameter Instruction Sheet com/documents coded to comply with 568C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode for Singlemode SC Connector Kits Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-55 db Typical Durability 200 Cycles for GR-326 Style Product Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Tested to GR-326 (Test Report ) Tunable 6 positions for Multimode SC Connector Kits Insertion Loss <0.2 db Typical Durability 500 Cycles TIA 586B Compliant Note: All part numbers are RoHS compliant. SC Connectors Simplex Connector Multimode SC Connector Kits Duplex Connector Singlemode SC Connector Kits Polymer Crimp Body GR-326 Style Singlemode SC Connector Kits Metal Crimp Body SC.6 mm to 2.0 mm Connector Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed Simplex Blue Blue 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A Duplex Blue Blue 3.0 mm Jacketed mm Jacketed Boot Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed () () Simplex Blue Blue 2.4 mm Jacketed mm Jacketed Duplex Blue Blue 2.4 mm Jacketed mm Jacketed Boot Used With Individual Pack Bulk Pack Crimp Tool 900 µm Buffered, 3.0 mm Jacketed Beige Aqua 3.0 mm Jacketed mm Jacketed µm Buffer N/A 900 µm Buffered, 3.0 mm Jacketed Simplex Beige Black 3.0 mm Jacketed mm Jacketed µm Buffer N/A 900 µm Buffered, 3.0 mm Jacketed Beige Beige 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A Beige Aqua 3.0 mm Jacketed mm Jacketed mm Jacketed Beige Black Duplex 2.0 mm Jacketed mm Jacketed Beige Beige 2.4 mm Jacketed mm Jacketed Connectors/Adapters/ Tooling & Accessories

11 SC Connectors (Continued) SC Connector Components 3.0 mm Jacket mm Jacket 900 µm Buffered Fiber SC Duplex Clip (Black) Use 2 pieces to duplex simplex housings SC Connector Component Selection Chart (bulk packaged) Fiber Type Simplex Connector Sub-Assembly Duplex Clip* Cable Size Crimp Eyelet w/ Heat Shrink Crimp Eyelet Strain Relief ** (2) mm X Singlemode - GR-326 Style 2.4 mm X (2) mm X 900 µm X 3.0 mm X 2.4 mm X Singlemode - Polymer Crimp Body (2) mm X 900 µm X (long) X (short) 2.4 mm X Multimode - Metal Crimp Body (Ceramic Ferrule) (2) mm X 900 µm X 3.0 mm X 2.4 mm X Multimode - Polymer Crimp Body (Ceramic Ferrule) (2) mm X 900 µm X (long) X (short) * For Fibre Channel compliant assemblies, use one () piece each of Y and Y. (Dash refers to color refer to customer drawing for details). ** Strain relief dash number indicates color - see page 55 for details. 54

12 3.0 mm - GR-326 Style 3.0 mm Angled SC Connectors (Continued) SC Strain Reliefs Jacketed Cable GR-326 Style Black Red Beige Blue 3.0 mm No mm No mm No mm Yes mm mm Yes SC Strain Reliefs Angled Black Beige Blue 3.0 mm Simplex mm Simplex mm 45 Simplex Connectors/Adapters/ Tooling & Accessories 900 µm Short 900 µm SC Strain Reliefs 900 micron Black Beige Blue Long (33 mm) 900 µm Short (0 mm) 900 µm GR-326 Style 900 µm GR-326 Style 900 µm SC Low Loss Loopback Connector /25 Multimode Use for Equipment Testing 0.6 db Insertion Loss 0.5" Ferrule Centerline /25 Multimode Use for Equipment Testing 0.8 db Insertion Loss 0.5" Ferrule Centerline Singlemode Use for Equipment Testing.5 db Insertion Loss 0.5" Ferrule Centerline 55

13 SC Connectors (Continued) Tight Jacketed SC Connectors Multimode or singlemode Simplex or duplex Tested using MIL-PRF /6 2.0 mm cable SC Commercial Item (CID) interim approval by Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market The tight jacketed SC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 56.9 [2.24] Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Tight Jacketed SC Connector Kits Fiber Type Kit X Simplex, mm Singlemode (blue body & straight boot) X Duplex, mm X Simplex, 2.4 mm X Simplex, mm Multimode (beige body & straight boot) X Duplex, mm 9854-X Simplex, 2.4 mm Note: X = - for individual package, -2 for bulk package. Instruction Sheet See 56

14 SC Connectors (Continued) SC Adapters Suitable for any SC connector Available with metal or ceramic alignment sleeves Choice of housing materials and colors coded to comply with 568C Aqua for 50/25 laser optimized Black for standard 50/25 Beige for 62.5/25 Blue for singlemode Duplex adapters accept two simplex connectors or one duplex connector Assortment of hybrid configurations available Mounting screws available Slide-on cover available EMI gasketed parts available SC Simplex Adapter - Plastic Flangeless SC Simplex Adapter - Plastic SC Simplex Adapter - Plastic Sleeve Material/Application Beige Metal/MM only Black Aqua Beige Metal Black Aqua Blue Beige Ceramic Black Aqua Blue Ceramic/APC Green Flangeless SC Simplex Adapter - Plastic Black Metal Blue Black Aqua Ceramic Blue Green Connectors/Adapters/ Tooling & Accessories SC Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC Simplex Adapter - Metal Flangeless SC Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel Note: All part numbers are RoHS compliant. Flangeless SC Simplex Adapter - Metal SC Duplex Adapter - Plastic SC Duplex Adapter - Plastic Sleeve Material/Application Beige Metal/MM only Black Aqua Beige Metal Black Aqua Blue Beige Ceramic Black Aqua Blue Ceramic/APC Green

15 SC Connectors (Continued) SC Adapters (Continued) SC Duplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC Duplex Adapter Shielded SC Duplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC Duplex Metal Adapter w/ EMI Shielding Designed to help prevent EMI leak Ideal for high-speed applications SC to ST Hybrid Adapters SC to ST Simplex Adapter - Plastic SC to ST Simplex Adapter - Plastic Beige Metal Black Aqua Blue Beige Ceramic Black Aqua Blue SC to ST Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC to ST Simplex Adapter - Metal 58

16 SC Connectors (Continued) SC to ST Hybrid Adapters (Continued) Flangeless SC to ST Simplex Adapter - Metal SC to ST Duplex Adapter - Plastic Flangeless SC to ST Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC to ST Duplex Adapter - Plastic Beige Metal (MM Only) Black Aqua Beige Metal Black Aqua Blue Beige Ceramic Black Aqua Blue Connectors/Adapters/ Tooling & Accessories SC to ST Duplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC to ST Duplex Adapter - Metal Slide-on Retractable Cover for SC Simplex or Duplex Applications The Tyco Electronics slideon retractable cover is used for simplex or duplex SC applications. These retractable doors slip onto the end of existing Tyco Electronics adapters and can be mounted after the adapter has already been installed Blue Simplex SC Beige Simplex SC Green Simplex SC Blue Duplex SC Green Duplex SC 59

17 ST Connectors Epoxy Type Epoxy type connector Pre-radiused ceramic ferrule Available in bulk packages Crimp tool Ceramic Singlemode Ceramic Insertion Loss 0.3 db typical Back Reflection <-40 db typical Durability 200 cycles Materials Ferrule Material Ceramic Body Material Nickel Plated Brass Coupling Nut Material Plated Die Cast Singlemode ST Connector Kits Ceramic Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Zinc Yellow (900 µm) 900 µm and 250 µm Fibers Yellow 900 µm and Nickel-plated Zinc (Bend-Limiting) 250 µm Fibers, Brass 3.0 mm Cable Zinc Yellow 900 µm and (Short) 250 µm Fibers, 3.0 mm Cable Ceramic Multimode Ceramic Insertion Loss 0.3 db typical Durability 500 cycles Multimode ST Connector Kits Ceramic Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack IS Sheet Black (Short) 3.0 mm Cable Black (Short) 900 µm Fiber, 3.0 mm Cable Polymer Polymer 900 µm and Black (Buffer)/ 250 µm Fibers, Black (Short) 2.4 mm & mm Cable Zinc Black (Short) 3.0 mm Cable Black (Short) 3.0 mm Cable Black (Buffer)/ Black (Short) 900 µm and 3.0 mm Cable Black (Buffer)/ 900 µm and Black 250 µm Fibers, Nickel-plated (Bend Limiting) 2.4 mm & Brass Zinc 3.0 mm Cable Black (Short) 2.4 mm & 3.0 mm Cable µm and Black (Right Angle) 250 µm Fibers, 2.4 mm & mm Cable 60

18 Multimode Polymer Composite Insertion Loss 0.3 db Typical Durability 500 Cycles Crimp Tool Instruction Sheet Materials Ferrule Composite Polymer Body Polymer Coupling Nut Polymer ST Connectors Epoxy Type (Continued) Polymer Composite Multimode ST Connector Kits Polymer Ferrule Body Coupling Nut Boot Used With Individual Pack Bulk Pack Black (Buffer)/ 900 µm and Black (Short) 250 µm Fibers, Polymer Polymer 3.0 mm Cable Black (Short) 3.0 mm Cable Connectors/Adapters/ Tooling & Accessories Multimode Stainless Steel Insertion Loss 0.3 db Typical Operating Temp. Range -30 C to +70 C Durability 500 cycles Crimp Tool Instruction Sheet Stainless Steel Materials Ferrule Stainless Steel Body Nickel plated brass Coupling Nut Zinc Multimode ST Connector Kits Stainless Steel Ferrule Body Stainless Steel Ferrule Designation Boot Used With 25 Black (Bend Limiting) 3.0 mm Cable Black (Long) 4.3 mm Cable Black (Bend Limiting) 3.0 mm Cable Black (Bend Limiting) 3.0 mm Cable Black (Bend Limiting) 3.0 mm Cable Black (Short) 3.0 mm Cable

19 ST Connectors Epoxy Type (Continued) Long Boot PVC Tubing [2.283] Crimp Eyelet Bare Buffer Boot TYGON Tubing [3.07] Connector Assembly Short Boot [.850] HYTREL Tubing [2.205] Protective Cover Right Angle Boot 62 TYGON is a trademark of Saint-Gobain Performance Plastics Corporation. HYTREL is a trademark of E.I. du Pont de Nemours and Company. ST Connector Component Selection Chart (Bulk Packaged) Fiber Type Connector Sub-Assembly Cable Size Crimp Eyelet Tubing Strain Relief * mm X 2.4 mm X Singlemode mm X Ceramic Ferrule Metal Body, Metal Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ceramic Ferrule Metal Body, Metal Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ceramic Ferrule Metal Body, Polymer Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ceramic Ferrule Polymer Body, Metal Nut 3.0 mm X 3.0 mm X 900 µm X mm X 2.4 mm X Multimode mm X Ceramic Ferrule Polymer Body, Polymer Nut 3.0 mm X 3.0 mm X 900 µm X * Strain relief dash number indicates color - see chart on page 63 for details.

20 ST Connectors Epoxy Type (Continued) Bend Limiting Short Right Angle Buffer Bend Limiting Strain Relief Bulk packages (00 pcs./package) Bend Limiting Short (3.0 mm) Right Angle Buffer Short (2.0 mm) Bend Limiting (2.0 mm) Black Blue Beige Connectors/Adapters/ Tooling & Accessories Free-hanging or panel mount design ST Coupling Receptacles Packaging Polymer Composite Single Multimode Bulk (000) Metal Single Multimode Bulk (50) Zirconia Ceramic Single Singlemode Bulk (50) ST Polymer Duplex Receptacle Metal/MM Only Beige Metal/MM Only Lt. Almond ST Active Device Mounts Multimode Designed to accept multimode TO-8, TO-46 and TO-52 active devices Nickel plated, die cast zinc Mount to PCB or through panel Includes positioning ring Packaging Height Standard height Single Low profile Single Low profile Single (00) Low profile Bulk (50)

21 FC Connectors One-piece connector body: Fastest assembly Compliant with: JIS C-5970 Pre-radiused ferrule Instruction Sheet Singlemode FC Connector Kits - Polymer Crimp Body Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Durability 200 Cycles Singlemode FC Connector Kits Polymer Crimp Body Boot Blue Used With Individual Pack Bulk Pack Crimp Tool 3.0 mm Jacketed mm Jacketed mm Jacketed µm Buffer N/A GR-326 Style FC Connector Kits - Metal Crimp Body Singlemode Insertion Loss <0.2 db Typical Return Loss <-59 db Typical Tested to GR-326 Tuning 6 position GR-326 Style Singlemode FC Connector Kits Metal Crimp Body Boot Used With Individual Pack Bulk Pack 3.0 mm Jacketed Crimp Tool () () Blue 2.4 mm Jacketed mm Jacketed µm Buffer mm - GR-326 Style FC Strain Reliefs Jacketed Cable GR-326 Style Black Red Beige Blue 3.0 mm No mm No mm No mm Yes mm mm Yes mm Angled 900 µm Short FC Strain Reliefs Angled Black Beige Blue 3.0 mm Simplex mm Simplex mm 45 Simplex µm FC Strain Reliefs 900 micron Black Beige Blue Long (33 mm) 900 µm Short (0 mm) 900 µm GR-326 Style 900 µm GR-326 Style 900 µm

22 FC Connectors (Continued) FC Connector Component Selection Chart (bulk packaged) Simplex Connector Crimp Eyelet w/ Crimp Strain Relief Fiber Type Sub-Assembly Cable Size Heat Shrink Eyelet * mm X Singlemode - GR-326 Style 2.4 mm X mm X 2.4 mm X Singlemode 3.0 mm X Polymer Crimp Body µm X (long) X (short) mm X 2.4 mm X Multimode - Ceramic Ferrule 3.0 mm µm (long) (short) * Strain relief dash number indicates color - see page 64 for details. Connectors/Adapters/ Tooling & Accessories FC Adapters FC Simplex Square Flange Adapter - Metal Panel Keyway Cut-out Slot (Nom.) Metal Square Flange Std mm Ceramic Square Flange Std mm FC Square Flange Adapter FC 8 mm/9 mm Dia. Round FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter - Metal Panel Cut-out Keyway Slot (Nom.) Metal (Copper) D-Hole Std mm Ceramic D-Hole Std mm Ceramic/APC D-Hole 2.05 mm Type R Ceramic/APC D-Hole Prec mm FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter - Metal Panel Cut-out Keyway Slot (Nom.) Metal Double D-Hole Std mm FC 8 mm Dia. Round (Double D) 65

23 FC Connectors (Continued) Hybrid Adapters - SC/FC/ST Hybrid FC to ST Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel FC to ST Simplex Adapter - Metal SC to FC Simplex Adapter - Plastic Metal Black Ceramic Blue SC to FC Simplex Adapter - Plastic SC to FC Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC to FC Simplex Adapter - Metal Flangeless Simplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel Flangeless SC to FC Simplex Adapter - Metal SC to FC Duplex Adapter - Metal Metal Electroless Nickel Ceramic Electroless Nickel SC to FC Duplex Adapter - Metal 66

24 FSD Connector Components Multimode Meets specifications of FDDI PMD - ANSI X3.66 Ceramic ferrules available Designed in polarization and user defined keying Insertion Loss 0.5 db typical Durability Ceramic Ferrules 500 cycles Nut Strain Relief Inner Crimp Ring Outer Crimp Ring Plug Dust Cover Type M Key Type B Key Type A Key Connectors/Adapters/ Tooling & Accessories Ceramic Instruction Sheet Light Duty Dual Inner Eyelets Plug Ferrule Assembly FSD Diameter Cable Type (µm) Replacement DUALAN Cable Light Duty DUALAN Cable Ferrules Single Packed Bulk Packed Single Packed Bulk Packed Ceramic Ferrules * * Termination Kit: * Bulk packed, 200 per package. Assembly Fixtures: with Polishing Tool: ; without Polishing Tool: Field Keyable FSD Receptacles and Adapters Multimode Receptacles Metal Ceramic FSD to FSD FSD to ST

25 ESCON Connector Components ESCON Connector Plug Multimode IBM Approved Simple field assembly Assembly Loss 0.2 db Typical Durability 200 cycles 25 µm Black DUALAN Cable DUALAN Cable * * Bulk packed, 50 per package Termination Kit: Instruction Sheet ESCON Receptacles Multimode Black ESCON to ESCON ESCON to ST ESCON Assembly Fixture Kit Used to hold ferrules during assembly, epoxy curing, and polishing. Allows simultaneous polishing of both ferrules. Black Without Polishing Bushing Polishing Bushing ESCON is a trademark of IBM Corporation.

26 Industry compatible with 905 (FSMA-I) and 906 (FSMA-II) style connectors Terminates fiber sizes from 25 through 000 microns in diameter Design parameters conform to NATO and IEC interface standards Insertion Loss.3 db Typical Temperature Range -55 C to +05 C Durability 200 cycles Documentation Product Specification Instruction Sheet FSMA 905 & 906 Test Report FSMA Products Multimode FSMA Connectors Ferrule Material Connector Body Material Fiber Nominal Jacket O.D. Diameter 3. mm 4.3 mm (µm) Stainless Nickel-Plated Steel Brass Connectors/Adapters/ Tooling & Accessories Adapter Precision mating adapter for all FSMA connectors In-line splice or panel mount design FSMA Adapters Hex Flange, Stainless Steel Hex Flange, Stainless Steel, Counterbore, Sealed Fixed Flange, Nickel-Plated Brass In-Line, Stainless Steel In-Line, Nickel-Plated Brass, Counterbore In-Line, Stainless Steel, Counterbore, Short Active Device Mount Designed to house TO-8, TO-46, and TO-52 devices Constructed of nickel plated die cast zinc alloy or stainless steel Mounts to PC board or through panel FSMA Active Device Mounts PC Mount Receptacle, Die Cast PC Mount Receptacle, Die Cast, Bulk Packaged PC Mount Receptacle, Stainless Steel