Read Me First. FUJITSU Storage ETERNUS CS800 S6. Table of Contents P3AM EN. ETERNUS CS800 S6 Manuals Package Contents...

Transcription

1 FUJITSU Storage ETERNUS CS800 S6 Read Me First Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS CS800 S6 (hereinafter referred to as "ETERNUS CS800 S6"). Read this document and check the shipment package to confirm that no items are missing. Refer to the ETERNUS CS800 S6 manuals that are listed in this document as necessary. Read and understand the "Safety Precautions" before use. "Safety Precautions" The information in this document is subject to change without notice for improvement and functionality expansion of the ETERNUS CS800 S6. The latest information about the ETERNUS CS800 S6 is available at the following website: Table of Contents ETERNUS CS800 S6 Manuals... 2 Package Contents... 3 Related Constitutions The company names and product names mentioned in this document are either registered trademarks or trademarks of their respective companies.

2 ETERNUS CS800 S6 Manuals The manuals are available at the following website: Manual Title Read Me First (this document) Description Describes how the manuals are organized, package contents, and the related constitutions. Safety Precautions Describes the safety precautions that must be taken. User Guide Describes the functions, initial setup, and system operation. User Guide - Command Line Interface - User Guide - Advanced Reporting - OST Guide Explains how to monitor and set the ETERNUS CS800 S6 via Command Line Interface (CLI). Explains how to utilize the performance data logs, visual reports, and graph function via ETERNUS CS800 S6 Advanced Reporting. Explains how to configure OST Optimized Replication to use with NetBackup or Backup Exec. 2

3 Package Contents Check the contents in the package contents list to make sure that none of the contents for the purchased product are missing. Put a check mark in the checkbox for each item confirmed. If there is a missing item, contact your sales representative. Store the package contents in a safe and secure location, as they may be needed again when making changes to the system or reinstalling the software. Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation. ETERNUS CS800 S6 Entry (8TB) (Product ID: ECS08FCU, ECS08FCC, ECS08FCA) CS800 controller (x 1) Cable clamp (x 2) For preventing the power cable from falling out Rack mount kit (x 1 set) ServerView Suite (x 1 set) OST Plug-in DVD (x 1) M5 flat head screw (x2) M5 screw (x 4) Unlocking tool (x 1) Read Me First (x 1) Safety Precautions (x 1) Safety Notes and Regulations (x 1) ETERNUS CS800 S6 Entry Extendable (8TB) (Product ID: ECS08FDU, ECS08FDC) CS800 controller (x 1) Cable clamp (x 2) For preventing the power cable from falling out Rack mount kit (x 1 set) ServerView Suite (x 1 set) OST Plug-in DVD (x 1) M5 flat head screw (x2) M5 screw (x 4) Unlocking tool (x 1) Read Me First (x 1) Safety Precautions (x 1) Safety Notes and Regulations (x 1) Unit label (x 1) 3

4 ETERNUS CS800 S6 Scale (32TB) (Product ID: ECS08FGU, ECS08FGC, ECS08FGA) Controller unit CS800 controller (x 1) Cable clamp (x 2) For preventing the power cable from falling out Rack mount kit (x 1set) ServerView Suite (x 1 set) OST Plug-in DVD (x 1) M5 flat head screw (x 2) M5 screw (x 4) Unlocking tool (x 1) Read Me First (x 1) Safety Precautions (x 1) Safety Notes and Regulations (x 1) Unit label (x 1) Cable display label (x 1) For displaying the cable connection destinations Nylon zip tie (x 8) For attaching the cable display label 4

5 Base storage unit Controller enclosure (x 1) Fibre Channel cable (x 2) Dual LC connector Dual LC connector (5m) For connecting the controller unit with the base storage unit Flange cover (x 1 set) Rack mount kit (x 1 set) LAN straight cable (x 2) RJ45 RJ45 (5m) For connecting the controller unit with the base storage unit Plate (x 2) Washer (x 4) Pin (x 1) For pushing the FUNCTION button M5 screw (x 3) M5 flat head screw (x 8) Read Me First (ETERNUS DX100 S3) (x 1) 5

6 ETERNUS CS800 2 x HBA, 4 x 1Gb Eth/HBA (Product ID: ECSD166) *1 Quad Port 1GbE card (x 2) *1: This product is pre-installed in the controller unit prior to shipping. ETERNUS CS800 2 x HBA, 2 x 10Gb Eth/HBA (Product ID: ECSD176) *1 Dual Port 10GbE card (x 2) 10GBASE-SR SFP+ (x 4) *1: This product may be pre-installed in the controller unit prior to shipping. 6

7 ETERNUS CS800 2 x HBA, 2 x 8Gb FC/HBA (Product ID: ECSD116) *1 Dual Port 8Gb FC card (x 2) *1: This product is pre-installed in the controller unit prior to shipping. ETERNUS CS800 HBA, 2 x 10Gb Eth/HBA (Product ID: ECSD186) *1 Quad Port 10GbE card (x 1) 10GBASE-SR SFP+ (x 2) *1: This product may be pre-installed in the controller unit prior to shipping. ETERNUS CS800 HBA, 2 x 8Gb FC/HBA (Product ID: ECSD156) *1 Dual Port 8Gb FC card (x 1) *1: This product is pre-installed in the controller unit prior to shipping. 7

8 ETERNUS CS800 S6 Entry Base Upgrade (Product ID: ECSD266U) *1 Disk drive (x 6) *1: This product may be pre-installed in the controller unit prior to shipping. ETERNUS CS800 S6 Entry Extendable JX Base (16TB) (Product ID: ECSD561U) ETERNUS JX disk cabinet (x 1) SAS cable (x 1) mini SAS HD (1.1m) Flange cover (x 1 set) Rack mount kit (x 1 set) Plate (x 2) Washer (x 8) M5 screw (x 4) M5 flat head screw (x 8) 8

9 ETERNUS CS800 S6 Entry Extendable JX Upgrade (Product ID: ECSD562U) *1 Disk drive (x 6) *1: This product may be pre-installed in ETERNUS JX disk cabinet prior to shipping. ETERNUS CS800 S6 Scale Extension Shelf (32TB) (Product ID: ECSD264U, ECSD264UL) ETERNUS CS800 S6 Scale Hotspare Kit (32TB) (Product ID: ECSD363U) Drive enclosure (x 1) Cable between enclosures (x 2) mini SAS HD (0.75m) Flange cover (x 1 set) Rack mount kit (x 1 set) Plate (x 2) Washer (x 4) M5 screw (x 4) M5 flat head screw (x 8) 9

10 Related Constitutions Applicable Environment The ETERNUS CS800 S6 was designed and manufactured for general office use, with user safety in mind. When using the ETERNUS CS800 S6, follow the handling instructions, and the placement and cautionary notes listed in the manuals. If used beyond the limits described, the users may be at risk of personal injury and/or material damage. Using the Manuals The manuals for the ETERNUS CS800 S6 contain important information regarding safe usage. Please read the manuals carefully before using the ETERNUS CS800 S6. Pay special attention to "Safety Precautions", and understand the contents thoroughly before connecting. Keep the manuals in a safe place for future reference. Fujitsu pays careful attention to the safe use of its products to prevent user injury and/or material damage. To use the ETERNUS CS800 S6 properly, please follow the instructions in the manuals. Maintenance support period The standard maintenance support period for the ETERNUS CS800 S6 is five years from the date of purchase, or is defined in your service level agreement (SLA). Maintenance Do not attempt to repair the ETERNUS CS800 S6 by yourself. Ask Fujitsu to dispatch one of its maintenance engineers or a maintenance engineer authorized by Fujitsu for maintenance work. Note that our maintenance engineer may connect maintenance equipment (such as PCs) in order to diagnose the ETERNUS CS800 S6. Maintenance engineers use one of the following connection for maintenance. ƪƪ Connection between an ETERNUS CS800 S6 and a customer's PC via a network ƪƪDirect connection between an ETERNUS CS800 S6 and a customer's PC ƪƪDirect connection between an ETERNUS CS800 S6 and a management PC (FST) Compliance Standards Product safety UL , CSA , EN , IEC , GOST Electromagnetic Compatibility FCC Part-15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class A, AS/NZS CISPR22 Class A, CNS13438(C6357) Class A, CTick, BSMI Electromagnetic Immunity EN CE certification Electromagnetic Compatibility Directive 2004/108/EC, Low Voltage Directive 2006/95/EC Environmental compliance RoHS-compliant (Restriction of Hazardous Substances), WEEEcompliant (Waste Electrical and Electronically Equipment) 10

11 This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, air craft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. You shall not use this Product without securing the sufficient safety required for the High Safety Required Use. If you wish to use this Product for High Safety Required Use, please consult with our sales representatives in charge before such use. The following notice is for EU users only. WARNING: This is a product which meets Class A of EN In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The following notice is for USA users only. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Laser Standard Class 1M laser product FUJITSU Storage ETERNUS CS800 S6 Read Me First Date of issuance: July 2016 Issuance responsibility: FUJITSU LIMITED The content of this manual is subject to change without notice. This manual was prepared with the utmost attention to detail. However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual. The content of this manual may not be reproduced or distributed in part or in its entirety without prior permission from Fujitsu. 11