Product Information ES582.1 Compact USB Device
|
|
|
- Ashley White
- 5 years ago
- Views:
Transcription
1 Product Information ES582.1 Compact USB Device 1 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
2 Content Compact Line Product Description 2 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
3 Content Compact Line Product Description 3 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
4 Compact Line Positioning In-Vehicle Premium Line In-vehicle Scalable High performance Robust High-end use cases Open interfaces Integration in ETAS SW In-Vehicle Compact Line In-vehicle Mobile Compact Low Priced In-Lab Line PC technology Scalable from RTPC to network HiLs 4 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
5 Content Compact Line Product Description Key Characteristics What is CAN-FD Technical Specification Portfolio Overview 5 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
6 Product Description Key characteristics ES582.1 adds CAN-FD access to the Compact Line Key Characteristics Targeted for ECU measurement, calibration, diagnostics and flash programming Power and communication over USB 2 High-Speed CAN-FD channels, electrical isolated Compatible with ISO and non-iso CAN-FD versions Supports SAE J CCP/XCP/UDS/KWP (with speed-up for CCP/XCP for better flashing performance) Multi-Client Support 6 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
7 Product Description What is CAN FD? CAN FD allows for 64 bytes and higher data rate in the data phase. Some advantages of CAN FD (CAN with Flexible Data rate): 1. Fulfills future bandwidth requirements up to 8 Mbit/s at low node cost 2. Allows reuse of the existing CAN wiring in the vehicle 3. Smooth migration by integration CAN FD node in a CAN network 4. Needs low power consumption 8 byte CAN Frame Arbitration Arbitration 1. Higher Data Rate During Data Phase 2. Up to 64 Byte Payload CAN FD Frame Arbitration Arbitration 8 byte 64 8 byte 7 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
8 Product Description Technical Specification Data sheet General Dimension (HxWxD) Weight Temperature range Relative humidity 22 x 50 x 91 mm / 0.87 x 1.97 x 3.58 in (housing) 100 g / oz -40 C to +70 C (Operation) -40 C to +85 C (Storage) 15 % to 95 %, non-condensing Power supply Power consumption CAN Interfaces CAN port USB powered, < 100 ma Input current at 5V 2 CAN-FD channel, with DSUB 9 connector (according to CiA standard) Protocols (CAN + CAN-FD) UDS (ISO14229/ISO15765), XCP, CAN Monitoring, OBD-on-CAN (ISO ) CCP1 and KWP-on-CAN (ISO14230/ISO15765) are supported with CAN classic only. SAE J Pass Thru Interface CAN transceiver Max. baud rate Electrical isolation - CAN 2.0B ISO CAN ISO High-speed transceiver (TJA1044G ), Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non ISO CAN FD V1 and ISO :2015 ) CAN: 1 Mbit/s, CAN-FD: 5 Mbit/s (at optimum environmental conditions even higher baud rates are possible. (USB CAN) Interface is galvanically isolated 8 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
9 Product Description Technical Specification Data sheet Data synchronization INCA synchronizes ECU data from the ES582, data from external measurement modules (e.g., ES400 family) and ETKs. 3 rd Party Hardware Support for Ipetronik CAN and CSM CAN hardware PC Interface USB Integrated USB cable USB 2.0, High speed 1,5 m / 4.9 ft Host system requirements Operating system Windows 7, 8, 10 Software support INCA V7.2 or higher, ODX-LINK V1.3 or higher, ODX-Flash, BUSMASTER, HSP, DiagRA & DTS (Diagnostic Tool Set) via J Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
10 Product Description Technical Specification Data sheet INCA support General Supported use cases Number of devices supported Flash programming ES582.1 is integrated native into INCA like any other ETAS HW device. Supported as of INCA V7.2.3 INCA supports all available CAN protocols also on ES ES582.1 supports CAN based measurement modules INCA supports up to four ES582.1 devices at a time. INCA can only use a CAN port for flash programming that is located in the same device that is used for Calibration and Measurement. 10 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
11 Product Description Product Schedule & Delivery Content ES582 Roadmap Project milestones: QA2 (Ordering possible): End November 2016 QA3 (Product release): Q ES582.1 Delivery Content ECU and Bus interface module Short Name Long Name Part Number ES582.1 ES582 Dual Channel CAN-FD Bus Interface USB Module TBD Including: CAN and FlexRay Interface Y-Cable (CBCF m3) F-00K Accessories Short Name Long Name Part Number CBCX131-0 CAN Termination Resistor 2xDSUB F-00K CBAC180-2 CAN Interface Cable, OBDII J DSUB (16mc-9fc), 2m F-00K Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
12 Compact USB Line Overview ES58x Family Overview Device Description Host 1 USB Flex Ray 2 ECU and Vehicle Bus interface System extension CAN HS CAN FD LIN LIN Master Roadmap ES581.4 CAN module Available ES582.1 CAN-FD module 1 - X Q ES583.1 FlexRay module Available 1 Host interface to connect to e.g. PC or ES A FlexRay port consists of a FlexRay node with A/B channels. 3 CAN or CAN-FD mode selectable by software 4 Update to ISO :2015 version of CAN-FD, both ISO and non ISO is supported in parallel 5 With synchronization node Note: The ES581.4 will remain in the ETAS compact line port folio and be sold in parallel to thees Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
13 Product Description Bus interface Portfolio Overview ETAS USB2x Compact Bus Interface Products ES581.4 CAN Bus Interface USB Module 2CH Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered Multi client support for simultaneous access from different tools 2 x CAN ES583.1 Compact FlexRay Device Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered 1x FlexRay node (A/B channel) with additional startup node 13 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
14 Thank You Compact Line Product Description 14 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
Product Information ES582.1 Compact USB Device
Product Information 1 Public PGA 2017-01-16 ETAS GmbH 2017. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product Description 2 Public PGA
ES511.1 CAN and LIN Network Module. User s Guide
ES511.1 CAN and LIN Network Module User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation
Automotive and industrial use cases for CAN FD
Improved CAN Automotive and industrial use cases for CAN FD Dr. Tobias Lorenz Author Dr. Tobias Lorenz Etas GmbH PO Box 300220 DE-70442 Stuttgart Tel.: +49-711-89661-0 Fax: +49-711-89661-107 tobias.lorenz@etas.com
Table of Contents ================================================================
Readme.txt INCA V7.0.0 Service Pack V17 Copyright (c) 2014 ETAS GmbH All Rights Reserved August 12, 2014 Dear customer, in this file you will find the latest information about the Service Pack. For detailed
Kvaser USBcan Light 2xHS EAN:
EAN: 73-30130-00714-7 The is a compact, reliable and cost-effective means of connecting two high speed CAN busses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin
ES512.1 FlexRay Network Module. User s Guide
ES512.1 FlexRay Network Module User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in
CAN FD - Flexible Tools for Flexible Data Rates
CAN FD - Flexible Tools for Flexible Data Rates Peter Decker Vector Informatik GmbH V 0.01 2012-06-20 Simulation & Test Environment for Automotive Networks Database Test Spec. ECU Simulation & Test Tool
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing imc BUSDAQ / BUSLOG Efficient data acquisition and real-time calculations Advantages
INCA-FLEXRAY V7.2 User Manual
INCA-FLEXRAY V7.2 User Manual Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
Accessories GL Loggers & CANlog
Product Information Table of Contents 1 Overview... 4 2 LINprobe... 5 2.1 Functions... 5 2.2... 5 3 GLA150... 6 3.1 Functions... 6 3.2... 6 4 GLA320... 7 4.1 Functions... 7 4.2... 7 5 CANgps / CANgps 5
ES585.1 K-Line Interface Compact. User's Guide
ES585.1 K-Line Interface Compact User's Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq imc BUSDAQflex at a glance Provides 2 to 12 CAN nodes
imc BUSDAQ / imc BUSLOG
imc BUSDAQ / imc BUSLOG autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing www.imc-berlin.com/busdaq imc BUSDAQ/BUSLOG at a glance Processes
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing
imc BUSDAQflex compact mobile expandable Intelligent multi-bus data logger for field and vehicle buses imc productive testing www.imc-berlin.com/busdaq Advantages imc BUSDAQflex Efficient vehicle and measurement
VT System Smart HIL Testing
VT System Smart HIL Testing V1.0 2010-06-04 Agenda > ECU Testing Testing a Door Control Unit Summary and Outlook Slide: 2 ECU Testing I/O Access for ECU Testing ECU has to be tested in its natural environment
Analysis and Testing of LIN ECUs
Welcome to the Vector Webinar: Analysis and Testing of LIN ECUs Presenter: Mr. Peter Decker Date: 2014-10-21, 9:00 10:00 am (CEST) V 1.0 2014-10-21 Agenda > LIN Tool Chain Product Overview CANoe.LIN &
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile
imc BUSDAQ autonomous intelligent synchronized Field bus data acquisition - from stationary to mobile imc productive testing Partner Italiano di imc dal 1993 Instrumentation Devices Srl Via Acquanera 29-22100
PEAK-System Product Overview
PEAK-System Product Overview 2018 PEAK-System You have a vision... You are working on the future of your company and planning successful products for tomorrow s markets? You want to translate your projects
Kvaser Leaf Professional HS OBDII EAN:
Leaf Professional HS OBDII Leaf Professional HS OBDII EAN: 73-30130-00404-7 NOTE: The Leaf Professional HS OBDII (73-30130-00404-7) has been marked "End of Life". Existing customers are encouraged to migrate
USB-Link 2 Vehicle Interface Installation and Setup Manual
USB-Link 2 Vehicle Interface Installation and Setup Manual Chapter 1: Introducing the USB-Link 2...1 Component Checklist...2 Product Specifications...3 System Requirements...4 Communication Options: Wired
VSI-2534 User Manual
VSI-2534 User Manual Version 2.2 April 2011 Foreword This document describes AutoEnginuity (DG) VSI-2534, and SAE J2534 Pass-Thru device with its primary purpose to program automotive ECUs (Electronic
Kvaser Leaf User Guide
Kvaser Leaf User Guide Copyright 2001-2009 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Thursday, 22 April 2010 We believe that the information contained herein was accurate in all respects
PEAK-System Product Overview
V. 7/17 PEAK-System Product Overview 2017 Singel 3 B-2550 Kontich Belgium Tel. +32 (0)3 458 30 33 info@alcom.be www.alcom.be Rivium 1e straat 52 2909 LE Capelle aan den Ijssel The Netherlands Tel. +31
bpnoookqj^ `^k=~åç=hjiáåé=_ç~êç User s Guide
bpnoookqj^ `^k=~åç=hjiáåé=_ç~êç User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in
ECU Measurement and Calibration in a Real-Time Test Environment. Roland Magolei National Instruments Engineering GmbH Embedded Networks
ECU Measurement and Calibration in a Real-Time Test Environment Roland Magolei National Instruments Engineering GmbH Embedded Networks Term Definitions What is ECU Calibration? Software Optimization of
CANopen IO X2 Fact sheet
CANopen IO X2 Fact sheet Overview The CANopen IO X2 is a very compact and cost effective CANopen IO module featuring a high-density of industrial proven I/O's. The module includes a CPU-core including
ES580 CAN and LIN Bus PCMCIA Card. User s Guide
ES580 CAN and LIN Bus PCMCIA Card User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation
HSP Update Tool V5.9.0
HSP Update Tool V5.9.0 Page 1 of 12 Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation
Virtualization of Heterogeneous Electronic Control Units Testing and Validating Car2X Communication
Testing and Validating Car2X Communication 1 Public ETAS-PGA 2017-07-06 ETAS GmbH 2017. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Testing and Validating Car2X
CAN-FD Flexible Data Rate CAN
FD CAN-FD Flexible Data Rate CAN A Short Primer and Update V. 202-08-27 Agenda > Why CAN-FD? What is CAN-FD? Basic Concepts CAN-FD Specifics Data Frame Operating Modes/States Physical Layer Considerations
Measuring Everything. White Paper
White Paper Table of Contents 1 Really Measuring Everything... 3 1.1 Measurement Concept in CANape... 5 1.2 Recorder PC Hardware... 6 2 Accessing Internal ECU Data... 6 2.1 Example: ECU... 9 2.2 Example:
Accessories for Network Interfaces CAN / LIN / IO / ETHERNET / FlexRay. Version 6.4 English
Accessories for Network Interfaces CAN / LIN / IO / ETHERNET / FlexRay Version 6.4 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this
INCA-EIP V7.2 User s Guide
INCA-EIP V7.2 User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
RazorMotion - The next level of development and evaluation is here. Highly automated driving platform for development and evaluation
RazorMotion - The next level of development and evaluation is here Highly automated driving platform for development and evaluation RazorMotion Highly automated driving platform for development and evaluation
PCAN-MiniDiag FD PCAN-MiniDiag Diagnostic Device for CAN FD FD Buses. User Manual. Document version ( )
PCAN-MiniDiag FD PCAN-MiniDiag Diagnostic Device for CAN FD FD Buses User Manual Document version 1.0.0 (2019-01-24) Relevant products Product name PCAN-MiniDiag FD Part number IPEH-003070 PCAN is a registered
imc fieldbus conection options Table of contents 1. imc fieldbus connection options 2. Fieldbus: Technical Details
Table of contents 1. imc fieldbus connection options 1.1 CAN-Bus... 3 1.2 LIN-Bus... 4 1.3 J1587-Bus... 5 1.4 ARINC-Bus... 6 1.5 FlexRay-Bus... 7 1.6 XCPoE Slave... 8 1.7 XCPoE Master... 9 1.8 PROFIBUS...
Introduction of CAN FD into the next generation of vehicle E/E architectures
Introduction of CAN FD into the next generation of vehicle E/E architectures 16 th international CAN Conference, March 7-8 2017, Nuremberg Marc Schreiner, Daimler AG Agenda Introduction Future Vehicle
Chances and challenges
Chances and challenges CAN FD for commercial vehicles Holger Zeltwanger Commercial vehicles CAN in mobile machinery Truck network architecture Trunk, fuel Switches CAN (FD) Instrumentation train (125 or
PCAN-TJA1054 Bus Converter High-Speed CAN to Low-Speed CAN. User Manual. Document version ( )
PCAN-TJA1054 Bus Converter High-Speed CAN to Low-Speed CAN User Manual Document version 2.1.0 (2013-11-15) Products taken into account Product Name Model Part number PCAN-TJA1054 IPEH-002039 CANopen and
Kvaser Leaf User Guide
Kvaser Leaf User Guide Copyright 2011-2018 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Monday 12 th February, 2018 We believe that the information contained herein was accurate in all respects
Introduction of CAN FD into the next generation of vehicle E/ E architectures. Vector CAN FD Symposium 2017, Marc Schreiner, Daimler AG
Introduction of CAN FD into the next generation of vehicle E/ E architectures Vector CAN FD Symposium 2017, 16.2.2017 Marc Schreiner, Daimler AG Agenda Introduction Future Vehicle Architectures Integration
SF2-CANDY. CompactPCI Serial Multi-Port CAN Controller. Product Information. 8/16 Port CAN 2.0B/CAN-FD. Quad PCI Express Mini Card Carrier
Product Information SF2-CANDY CompactPCI Serial Multi-Port CAN Controller 8/16 Port CAN 2.0B/CAN-FD Quad PCI Express Mini Card Carrier Document No. 8850 14 November 2018 General The SF2-CANDY is a quad
INDUSTRIAL INCLINOMETER SAE J1939 INTERFACE
The industrial inclinometers are compact solutions for determining the inclination in both single and dual axes with remarkable precision and at a lower expense. The molded housing provides the mechanical
Q.brixx station 101. Base Unit with Test Controller. Most important features:
Most important features: Q.brixx base unit consists of side handles, Test Controller Q.brixx station and power supply unit, ready for 14 measurement modules in the same housing and up to 32 plug-in modules
HSP Update Tool V
HSP Update Tool V4.18.70 Page 1 of 11 Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation
HSP-SP V Release Notes HSP-SP V Release Notes. Page 1 of 7
HSP-SP V11.0.1 Page 1 of 7 Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
PCAN-Router FD Universal, programmable Converter for CAN FD and CAN. User Manual. Document version ( )
PCAN-Router FD Universal, programmable Converter for CAN FD and CAN User Manual Document version 1.0.1 (2017-01-27) Relevant products Product Name Model Part number PCAN-Router FD 2 D-Sub connectors IPEH-002214
rcube2: Advanced Rapid Prototyping Electronic Control Unit
Page 1 rcube2: Advanced Rapid Prototyping Electronic Control Unit Overview rcube2 is a rapid prototyping ECU based on AUTOSAR that enables fast and efficient development of control systems from initial
Current and Prospective High-speed Measurement Systems
Current and Prospective High-speed Measurement Systems Vector Congress 2010, Stuttgart V0.01 2010-11-29 Agenda > Definition: Measurement and Calibration Hardware Customer Requirements Vector Product Strategy
CANopen IO X1 Fact sheet
CANopen IO X Fact sheet Overview The CANopen IO X is a very compact and cost effective CANopen IO module featuring a high-density of industrial proven I/O's. The module includes a CPU-core including the
CANopen IO X4 Fact sheet
CANopen IO X4 Fact sheet Overview The CANopen IO X4 is a very compact and cost effective CANopen IO module featuring a high-density of industrial proven IO's. The module includes a CPU-core including the
ES Knock Intensity Detection Board. KID_SU KID Signal Unit User Manual
ES1380.2 Knock Intensity Detection Board KID_SU KID Signal Unit User Manual Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes
Profibus DP slave. dual ported RAM 2Kbyte. Maximum length for I/O data. Maximum length for output data. Status display
PROFIBUS DP SLAVE MODULE DPB 021 Profibus DP slave module DPB021 The DPB 021 DIAS module is an interface module between the Profibus and the DIAS bus. Via the DIAS bus the data at the dual port RAM can
imc BUSDAQ-2 / imc BUSDAQ-X / imc BUSLOG
imc BUSDAQ2 / imc BUSDAQX / imc BUSLOG 20131121 imc BUSDAQ2 / imc BUSDAQX / imc BUSLOG CANDatalogger imc BUSLOG imc BUSDAQ2 imc BUSDAQX Data Sheet Version 1.6 imc BUSDAQ is a multibus data logger for LIN
USB-C Multiport Adapter for Laptops - Power Delivery - DVI - GbE - USB 3.0
USB-C Multiport Adapter for Laptops - Power Delivery - DVI - GbE - USB 3.0 Product ID: DKT30CDVPD Expand the connectivity of your USB-C enabled laptop. This sleek USB-C multiport adapter lets you create
dspace GmbH Rathenaustr Paderborn Germany
New DNA for Modular RCP Systems Revolution of an Evolution Frank Mertens - Product Management Rapid Prototyping Systems October 2017 dspace GmbH Rathenaustr. 26 33102 Paderborn Germany Today s Modular
The CAN Bus From its Early Days to CAN FD By Friedhelm Pickhard (ETAS/P)
By Friedhelm Pickhard (ETAS/P) 1 ETAS Introduction to ETAS Group ETAS Group Corporate Profile Founded 1994 Shareholder Headquarters 100 % Robert Bosch GmbH Stuttgart, Germany 18 additional offices worldwide
ODX-LINK V1.5 ODX-FLASH V1.5 User s Guide
ODX-LINK V1.5 ODX-FLASH V1.5 User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation
Implementation and Validation of K Line (ISO 9141) Protocol for Diagnostic Application
Implementation and Validation of K Line (ISO 9141) Protocol for Diagnostic Application Gauri Mahajan 1, Mr. S.K.Parchandekar 2, Mr. Mohammad Tahir 3 1,2 Department of Electronics Engineering Walchand college
POSITILT CAN SAE J1939 Output Specification
CAN SAE J1939 Output Specification Description Inclination sensor according to standard SAE J1939. Configuration of operating parameters by proprietary-a- Message (peer-to-peer connection). Process data
Calibration and Bypassing Hardware. Modular concept for measurement, calibration, diagnostic, and bypassing tasks
Calibration and Bypassing Hardware Modular concept for measurement, calibration, diagnostic, and bypassing tasks dspace 2 Contents Calibration and Bypassing Hardware 4 USB to CAN Converter DCI-CAN1 4 USB
Standardized Tool Components for NRMM-Diagnostics
Standardized Tool Components for NRMM-Diagnostics Peter Subke (Softing Automotive Electronics) In the past, passenger car manufacturers have learned the lesson that competition on the level of bits and
CANape. Product Information
Product Information Table of Contents 1 Overview... 4 1.1 Introduction... 4 1.2 Overview of Advantages... 4 1.3 Application Areas... 5 1.4 Features... 5 1.5 System Requirements... 5 1.6 Supported Bus Interfaces
Discrete I/O P/N: AXDIO inputs, 8 relay outputs, SAE J1939 with Electronic Assistant
Technical Datasheet #TDAXDIO128 Discrete I/O P/N: AXDIO128 12 inputs, 8 relay outputs, SAE J1939 with Electronic Assistant Description: The Discrete I/O Module reads 12 discrete inputs and sets 8 Form
Network analysis and automotive diagnostics
Network analysis and automotive diagnostics Designed for the automotive industry Offers is a 5 in 1 CAN/LIN bus monitoring tool with integrated automotive diagnostic functions. Ÿ Automotive OBD Scan tool
Hardware Manual RM CANview Gateway
Hardware Manual RM CANview Gateway 2008 RM Michaelides Software & Elektronik GmbH Donaustraße 14 D-36043 Fulda Germany cvgateway-hw-e.doc Table Of Contents 1 Legal Regulations... 3 2 About the CANview
INCA-FLEXRAY V6.2. User Manual
INCA-FLEXRAY V6.2 User Manual Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
Kvaser PCIcan II User's Guide
Kvaser PCIcan II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
PCAN-Optoadapter Plug-on Adapter for Decoupling CAN Networks. User Manual. Document version ( )
PCAN-Optoadapter Plug-on Adapter for Decoupling CAN Networks User Manual Document version 3.0.1 (2013-10-21) Products taken into account Product Name Model Part number PCAN-Optoadapter IPEH-002038 CANopen
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
DS2020SingleAxis ExtremelyCompact ServoDrives
DS2020SingleAxis ExtremelyCompact ServoDrives INTRODUCTION If you need the best performance and design flexibility, look no further than Moog and its expertise. With collaboration, creativity and cutting-edge
Kvaser PCIcanx II User's Guide
Kvaser PCIcanx II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
Q.brixx station 101. Base Unit with Test Controller. Most important features:
Most important features: Q.brixx base unit consists of side handles, Test Controller Q.brixx station and power supply unit, ready for 14 measurement modules in the same housing and up to 32 plug-in modules
LABCAR-OPERATOR V5.4.2 Getting Started
LABCAR-OPERATOR V5.4.2 Getting Started Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation
Diagnostic Trends 2017 An Overview
Diagnostic Trends 2017 An Overview Vector India Conference, 2017-07-18+19 V1.0 2017-07-14 Agenda 1. DoIP 2. Remote Diagnostics 3. Cyber Security 4. Summary 2/29 DoIP Why DoIP? Why another diagnostic network?
VH6501 CAN Disturbance Interface Manual. Version 1.0 English
VH6501 CAN Disturbance Interface Manual Version 1.0 English Imprint Vector Informatik GmbH Ingersheimer Straße 24 D-70499 Stuttgart The information and data given in this user manual can be changed without
INCA-ES5xx V Release Notes
INCA-ES5xx V7.0.1 Release Notes Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to
USB-KNX Interface OCI702. USB-KNX interface with cables and service bag
USB-KNX Interface OCI702 USB-KNX interface with cables and service bag The USB-KNX interface OCI702 serves to provide a USB-KNX connection to access tools from a Microsoft Windows PC to a KNX network or
GL Logger Families. Product Information
Product Information Table of Contents 1 Introduction to the GL Logger... 4 1.1 Overview of Advantages... 4 1.2 Bus Systems and Interfaces... 5 2 Functions... 5 2.1 Graphical Configuration Program... 5
Flash Bootloader. Product Information
Product Information Table of Contents 1 Flash Memory Programming... 3 2 Flash Bootloader - ECU programming via CAN, LIN, FlexRay, MOST and Ethernet... 3 2.1 Overview of Advantages... 3 2.2 Application
Kvaser Memorator 2xHS v2 EAN:
Memorator 2xHS v2 Memorator 2xHS v2 EAN: 73-30130-00821-2 The Memorator 2xHS v2 is a compact, dual channel CAN bus interface and standalone datalogger that allows users to monitor and collect data from
Currently shipped for ETK-Mode: B010/01. Currently shipped for FETK-Mode: B010/01. Date Released: Department PGA/PRM-M2
Product: ETK-S20.1 Rev : 13 Page 1 of 10 Product : File : TTNR : ETK-S20.1A Release Notes ETK-S20.1 V13.docx F-00K-109-139 Currently shipped for ETK-Mode: 337278B010/01 Comments : EPLD version: V33 FPGA-Boot
FlexRay International Workshop. Protocol Overview
FlexRay International Workshop 4 th March 2003 Detroit Protocol Overview Dr. Christopher Temple - Motorola FlexRay principles Provide a communication infrastructure for future generation highspeed control
High-Speed Reprogramming and Calibration with CAN FD: A Case Study
High-Speed Reprogramming and Calibration with CAN FD: A Case Study Armin Happel, Erik Sparrer, Oliver Kitt, Oliver Garnatz, Peter Decker Reprogramming of ECUs as well as their in-vehicle calibration are
INCA-ES9xx V7.0.2 Release Notes
INCA-ES9xx V7.0.2 Release Notes Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to
Kvaser PC104+ User's Guide
Kvaser PC104+ User's Guide Copyright 2001-2003 KVASER AB, Mölndal, Sweden http://www.kvaser.com Last updated Monday, 13 November 2006 - Printed Monday, 13 November 2006 We believe that the information
INCA-LIN V7.2 User s Guide
INCA-LIN V7.2 User s Guide Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
Release Notes INCA-RDE V1.0. Release Notes. Page 1 of 11
INCA-RDE V1.0 Page 1 of 11 Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this
PCAN-USB X6 CAN FD Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB X6 CAN FD Interface for High-Speed USB 2.0 User Manual Document version 1.1.2 (2018-02-22) Relevant products Product name Model Part number PCAN-USB X6 with D-Sub connectors Red corners IPEH-004062
ACS HEAVY DUTY INCLINOMETER SAE J1939 INTERFACE
ACS HEAVY DUTY INCLINOMETER ACS Heavy Duty inclinometers from POSITAL are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The
CANdoISO Module Datasheet
Datasheet NET50006/1 CANdoISO Module Datasheet 1 Overview The CANdoISO Module is an isolated USB to CAN bus interface in a format suitable for SMT or through hole PCB mounting. The module is based on the
OBD-II Engine Code Reader with Bluetooth Technology
User Manual OBD-II Engine Code Reader with Bluetooth Technology PP-2145 Specifications: Working environment temperature: -40 C ~ 85 C Voltage: 9-16VDC Working current: 45mA Standby current: < 40mA Wireless
MIGRATING TO CAN FD. Tony Adamson. Marketing Director CAN / LIN / FlexRay
MIGRATING TO CAN FD Tony Adamson Marketing Director CAN / LIN / FlexRay Agenda WHO ARE WE CAR NETWORKS UNDER TRANSFORMATION SPEED SRITY OUR MISSION AND STRATEGY 2 2 FEBRUARY 16, 2016 VECTOR CAN FD SYMPOSIUM
PCAN-USB FD CAN FD Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB FD CAN FD Interface for High-Speed USB 2.0 User Manual Document version 1.3.1 (2017-01-27) Relevant products Product name Model Part number PCAN-USB FD IPEH-004022 CANopen and CiA are registered
INCA-LIN V6.2. User Manual
INCA-LIN V6.2 User Manual Copyright The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this document.
VersaMax IP Input Module
Module is used to accept digital input signals. Module Specifications Housing dimensions (width x height x depth) Connection style Operating temperature Storage temperature Operating/storage humidity 60mm
Diagnostic Use Cases V
Diagnostic Use Cases V1.01 2017-06-29 Agenda 1. Diagnostic Use Cases 3 2. Testing 6 3. Reprogramming 15 4. ECU Configuration 19 5. Vehicle Function Data 23 2 Diagnostic Use Cases Overview ECU Configuration
Kvaser T-Cannector v2 EAN:
T-Cannector v2 EAN: 73-30130-00776-5 T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/ 0 Ohm) it provides an affordable
High-Performance NI-XNET Interfaces for CAN, LIN, and FlexRay NI PCI-851x, NI PXI-851x, NI 986x
Technical Sales (866) 531-6285 orders@ni.com Requirements and Compatibility Ordering Information Detailed Specifications Pinouts/Front Panel Connections For user manuals and dimensional drawings, visit
10 th AUTOSAR Open Conference
10 th AUTOSAR Open Conference Dr. Günther Heling Vector Informatik AUTOSAR Adaptive Platform Now it s Time to get on Board AUTOSAR Nov-2017 Introduction At the first glance Adaptive and Classic don t have