Product Information ES582.1 Compact USB Device

Size: px

Start display at page:

Download "Product Information ES582.1 Compact USB Device"

Anna Franklin
5 years ago
Views:

Product Information 1 Public PGA 2017-01-16 ETAS GmbH 2017.

Compact Low Priced In-Lab Line PC technology Scalable from RTPC to network HiLs 4 Public PGA

4 Compact Line Positioning In-Vehicle Premium Line In-vehicle Scalable High performance Robust High-end use cases Open interfaces Integration in ETAS SW In-Vehicle Compact Line In-vehicle Mobile Compact Low Priced In-Lab Line PC technology Scalable from RTPC to network HiLs 4 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

5 Content Compact Line Product Description Key Characteristics What is CAN-FD Technical Specification Portfolio Overview 5 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

communication over USB 2 High-Speed CAN-FD channels, electrical isolated Compatible with ISO and non-iso CAN-FD versions Supports SAE J2534-2 Support of

6 Product Description Key characteristics ES582.1 adds CAN-FD access to the Compact Line Key Characteristics Targeted for ECU measurement, calibration, diagnostics and flash programming Power and communication over USB 2 High-Speed CAN-FD channels, electrical isolated Compatible with ISO and non-iso CAN-FD versions Supports SAE J Support of several CAN protocols (CCP/XCP/UDS/KWP) Multi-Client Support Easy integration in 3 rd party SW with EBI-IP ( EBI-IP: ETAS Bus Interfaces Integration Package) 6 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

Product Description What is CAN FD? CAN FD allows for 64 bytes and higher data rate in the data phase. Some advantages of CAN FD (CAN with Flexible Data rate): 1.

7 Product Description What is CAN FD? CAN FD allows for 64 bytes and higher data rate in the data phase. Some advantages of CAN FD (CAN with Flexible Data rate): 1. Fulfills future bandwidth requirements up to 8 Mbit/s at low node cost 2. Allows reuse of the existing CAN wiring in the vehicle 3. Smooth migration by integration CAN FD node in a CAN network 4. Needs low power consumption 8 byte CAN Frame Arbitration Arbitration 1. Higher Data Rate During Data Phase 2. Up to 64 Byte Payload CAN FD Frame Arbitration Arbitration 8 byte 64 8 byte 7 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

8 Product Description Technical Specification Data sheet General Dimension (HxWxD) Weight 23 x 45 x 87 mm / 0.91 x 1.77 x 3.43 in (housing) 150 g / oz (with USB cable) Temperature range Operation: -40 C to +70 C / -40 F to +158 F Storage : -40 C to +85 C / -40 F to +185 F Relative humidity 15 % to 95 %, non-condensing Ingress protection IP52 Power consumption CAN Interfaces CAN port USB powered, < 350 ma Input current at 5V 2 CAN-FD channel, with DSUB 9 connector (according to CiA standard) Protocols (CAN + CAN-FD) UDS (ISO14229/ISO15765), XCP, CAN Monitoring, OBD-on-CAN (ISO ) CCP1 and KWP-on-CAN (ISO14230/ISO15765) are supported with CAN classic only. SAE J2534 Pass Thru Interface CAN transceiver Max. baud rate Electrical isolation - CAN 2.0B ISO High-speed transceiver (TJA1044G ), Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non ISO CAN FD V1 and ISO :2015 ) CAN: 1 Mbit/s, CAN-FD: 5 Mbit/s (at optimum environmental and topological conditions even higher baud rates are possible. The CAN Interfaces are electrically isolated from the USB interface 8 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

9 Product Description Technical Specification Data sheet Data synchronization INCA synchronizes ECU data from the ES582, data from external measurement modules (e.g., ES400 family) and ETKs. 3 rd Party Hardware Support for e.g. Ipetronik CAN and CSM CAN hardware PC Interface USB Integrated USB cable USB 2.0, High speed 1,5 m / 4.9 ft Host system requirements Operating system Windows 7, 8, 10 Software support INCA V7.2 or higher, ODX-LINK V1.3 or higher, ODX-Flash, BUSMASTER, HSP, DiagRA & DTS (Diagnostic Tool Set) via J Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

10 Product Description Technical Specification Data sheet INCA support General Supported use cases Number of devices supported Flash programming ES582.1 is integrated native into INCA like any other ETAS HW device. Supported as of INCA V7.2.3 INCA supports all available CAN protocols on the ES ES582.1 supports CAN based measurement modules INCA supports up to four ES582.1 devices at a time. INCA can only use a CAN port for flash programming that is located in the same device that is used for Calibration and Measurement. 10 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

Product Description Product Schedule & Delivery Content ES582 Roadmap Project milestones: QA2 (Ordering possible): End December 2016 QA3 (Product release): Q1 2017 ES582.

1 ES582 Dual Channel CAN-FD Bus Interface USB Module F-00K-110-731 Including: CAN and FlexRay Interface Y-Cable (CBCF100.

11 Product Description Product Schedule & Delivery Content ES582 Roadmap Project milestones: QA2 (Ordering possible): End December 2016 QA3 (Product release): Q ES582.1 Delivery Content ECU and Bus interface module Short Name Long Name Part Number ES582.1 ES582 Dual Channel CAN-FD Bus Interface USB Module F-00K Including: CAN and FlexRay Interface Y-Cable (CBCF m3) F-00K Accessories Short Name Long Name Part Number CBCX131-0 CAN Termination Resistor 2xDSUB F-00K CBAC180-2 CAN Interface Cable, OBDII J DSUB (16mc-9fc), 2m F-00K Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

12 Compact USB Line Overview ES58x Family Overview Device Description Host 1 USB Flex Ray 2 ECU and Vehicle Bus interface System extension CAN HS CAN FD LIN LIN Master Supported OS versions Roadmap ES581.3 CAN module Windows 7, 8, 10 Superseded 6 ES581.4 CAN module Windows 7, 8, 10 Available ES582.1 CAN-FD module Windows 7, 8, 10 Q ES583.1 FlexRay module Windows 7, 8, 10 Available 1 Host interface to connect to e.g. PC or ES A FlexRay port consists of a FlexRay node with A/B channels. 3 CAN or CAN-FD mode selectable by software 4 Update to ISO :2015 version of CAN-FD, both ISO and non ISO is supported in parallel 5 With synchronization node 6 Not in program because superseded by the ES581.4 since Q Limited firmware maintenance. Note: The ES581.4 will remain in the ETAS compact line port folio and be sold in parallel to the ES Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

support for simultaneous access from different tools 2 x CAN ES583.

13 Product Description Bus interface Portfolio Overview ETAS USB2x Compact Bus Interface Products ES581.4 CAN Bus Interface USB Module 2CH Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered Multi client support for simultaneous access from different tools 2 x CAN ES583.1 Compact FlexRay Device Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered 1x FlexRay node (A/B channel) with additional startup node 13 Public PGA ETAS GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing,

Thank You Compact Line Product Description 14 Public PGA 2017-01-16 ETAS GmbH 2017.

Product Information ES582.1 Compact USB Device

Product Information ES582.1 Compact USB Device 1 Public PGA 2016-08-15 ETAS GmbH 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, Content Compact Line Product