SNAP STICK. Wireless Smartphone Camera Stick with Bluetooth USER GUIDE

Transcription

1 SNAP STICK Wireless Smartphone Camera Stick with Bluetooth USER GUIDE

2 Getting familiar with your 3SIXT SNAP STICK Clamp 2 Snap Stick c 1 Press Button USB Cable 4 3 Stopper b USB Charging Port LED Light d a ON/OFF switch SNAP STICK

3 For more information GETTING STARTED for the first time The 3SIXT Snap Stick is based on Bluetooth HID * wireless communication technology just pair, smile and snap. Charge Snap Stick for 60 minutes before use to maximise your time, using the supplied USB Cable ( 4 ). The USB Cable can be inserted into a USB 2.0 or 3.0 port on a computer, USB wall or car charger. Also, before pairing, turn off nearby Bluetooth devices to avoid signal interference e.g. Bluetooth keyboards, mice, speakers etc. 1. For ios smartphones (iphone) 1. Turn Snap Stick ON ( a ). A blue LED light ( d ) should start flashing. 2. Go to Settings > Bluetooth on your smartphone. 3. Turn Bluetooth ON or device will automatically Scan. 4. Wait for your device to find kjstar. 5. Select kjstar to pair Snap Stick with your Camera #. The blue LED light ( d ) should flash quickly to indicate that Snap Stick and your smartphone are paired. For Android smartphones (e.g. Samsung, HTC, LG, Nokia, Sony) 1. Turn Snap Stick ON ( a ). A blue LED light ( d ) should start flashing. 2. Go to Settings > Bluetooth on your smartphone. 3. Turn Bluetooth ON or press Scan.

4 4. Wait for your device to find kjstar. 5. Select kjstar to pair Snap Stick with your Camera #. The blue LED light ( d ) will continue to flash quickly to indicate that Snap Stick and your smartphone are paired. You must operate Snap Stick within 40 seconds from this pairing otherwise a re-start, re-scan and re-pairing of Snap Stick may be needed. 2. Fixing your smartphone to the clamp ( 2 ) then Snap Stick ( 1 ) Place your device into the device clamp ( 2 ). If your device is too small, use the stopper ( 3 ). Fix the device clamp onto the screw of the Snap Stick. 3. Operating Snap Stick with your camera app 1. Go to your smartphone s standard camera app^ and make sure you can see yourself on the screen by pressing the camera flip icon - (ios) or (Android) - if not already. 2. Stretch the shaft of the Snap Stick to the desired length (up to 1 metre). 3. Wait for you camera to auto-focus on you and click the Press button Please note: Snap Stick automatically goes into standby mode or sleep within 2 hours of inactivity. To wake, press the Snap button (Snap Stick will awaken 5 seconds later). and support visit

5 INDICATIONS & TROUBLESHOOTING LED light does not light up when Snap Stick is turned ON Blue LED light flashes once Blue LED light keeps flashing quickly Blue LED light keeps flashing slowly Red LED light is on There is no power left charge Snap Stick Snap Stick is taking a photo Snap Stick is pairing with your device or Snap Stick is waking up from Standby/ Sleep Snap Stick s battery is low - charge Snap Stick Snap Stick is charging SPECIFICATIONS Working environment temperature -10 to 40 Working environment relative humidity 10% to 90% Battery capacity 45mAH Charging voltage DC 5.0V Charging time 1 hour Standby time 100 hours Autosleep/Standby 2 hours without use *A Bluetooth HID device is a device providing the service of human or other data input and output to and from a Bluetooth HID Host. Examples of Bluetooth HID devices are keyboards, mice, gaming controllers, gamepads, remote controls, voltmeters and temperature sensors. # The pairing of Snap Stick to your camera is only needed once. If you restore or reset your device to factory settings after pairing, you may have to re-pair Snap Stick to your device. ^The standard camera app is the app that came packaged with the device. Third party camera apps may not behave according to Snap Stick s User Guides instructions.

6 COMPATIBLE DEVICES The Snap Stick is only compatible with smartphones with Bluetooth version 3.0 or newer, running ios 4.0 or newer and Android 3.0 or newer. CAUTION & SAFETY Please read the User Guide carefully before use Please do not dismantle Snap Stick Please do not use corrosive solvent to clean it Do not charge Snap Stick under high temperature conditions Do not use Snap Stick in wet or damp conditions Do not dispose Snap Stick into fire Do not knock or drop Snap Stick For more information visit The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. ipod, iphone, ipad are trademarks of Apple Inc., registered in U.S. and other countries.