Industrial RFID Systems BIS M Contents
|
|
- Avis Terry
- 6 years ago
- Views:
Transcription
1 Industrial RFID Systems M Contents Host controller PLC, PC M For lightning-quick data transfer and large read/write distances 134 Range of applications 136 Selection criteria for read/write distances 138 Data carriers with processor Handy Programmer Installation 176 times, M Interface variations INTERBUS PROFIBUS-DP DeviceNetTM INTERBUS PROFIBUS-DP DeviceNetTM EtherNet Serial RS232 Serial RS232 Expander module Z-ER See starting page 210 Data carriers 133
2 Industrial RFID Systems M Wide range of applications, many different variants The main areas of application of M include internal company logistics, access control and copy protection. The powerful identification system is proven in all applications where lightning-fast data transfer and large read/write distances are required. Select the most suitable M system for your application from the table. Tools Production Data storage on machine tools Tool and die management Assembly conveying systems Data carrier Tool holder collar Retention knob On tool Dies Pallets On part M /L M /L n n M /A n n n n n M /A n n n n n M /L n n n M /L M /L M /L M /L n n n M /A n n n n M /A n n M /A n n 134
3 Industrial RFID Systems M Typical applications Intralogistics Access and object control Retainer/workpiece carrier Closed logistics circuits Pallets Retainer/workpiece carrier Storage and retrieval equipment Storage and tracking Workpiece carrier Skid Guiding, steering Intelligent vehicles (driverless transport vehicles) Identification In component Object detection On component Reliable access control n n n n n n n n n n n n n n n Access control Entry control Process access n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n PartID Dynamic or static Installation in metal For harsh environments Long distances (> 16 mm) n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 752-byte memory 2000-byte memory M S Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, n 135
4 Industrial RFID Systems M Selection criteria for read/write distances 0-12 Data carrier M /A M /A Page 138 M /A M /A Page 138 M /L Page 139 Memory capacity in bytes M M Page 145 distance mm mm mm mm M M Page mm mm mm mm M Page mm mm M Page mm mm mm mm M Page mm mm mm mm mm mm mm 8-20 Data carrier M /L Page 138 M /L Page 139 M /A M /A Page 138 M /L Page 141 M /L Seite 139 M /L Page 139 M M Page 149 M M Page 145 M M Page 147 M Page 155 M Page 153 Memory distance capacity in bytes mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Data carrier M /L Page 139 M /L Page 138 M /L Page 139 M /L Page 139 M /L Page 140 M /L Page 141 M M Page 149 M M Page 145 M Page 155 M Page 153 M Page 159 Memory distance capacity in bytes mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm = Data carrier flush mounted in steel 136
5 Industrial RFID Systems M Selection criteria for read/write distances How much data do you require? How dynamic is your application? Use the table and combine the M components as you need them. In three steps you will have selected your M system: 1. First choose the appropriate form factor for your data carrier and the associated read/write. 2. Then determine your read/write distance, which also depends on the speed of your system: the faster the data carrier moves, the closer the distance needs to be. 3. Finally determine the desired memory capacity. This will give you the maximum data security. Questions? Whatever your need, whether analysis, selection and return on investment, formats, interfaces and software, installation, disassembly and retrofi tting in short: we are here to help you in every way. Take advantage of our personal consultation, individual support and worldwide service. And contact us. M Data carrier M /L Page 139 M /L Page 138 M /L Page 139 M /L Page 139 M /L Page 140 M /L Page 141 M /L Page 141 M M Page 149 M M Page 151 M M Page 145 M Page 155 M Page 159 Memory distance capacity in bytes mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm S Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, > 40 Data carrier M /L Page 139 M /L Page 140 M /L Page 141 M /L Page 141 M /A Page 143 M /A Page 143 M M Page 149 M M Page 151 M Page 150 M Page 159 Memory distance capacity in bytes mm mm mm mm mm mm mm mm mm mm mm mm on metal mm on metal M Page mm on metal mm on metal n 137
6 flush in steel non-metal flush in steel non-metal non-metal Industrial RFID Systems M Data Carriers Read/Write Dimensions Housing material Antenna type Weight PA12 round < 1.5 g 12 6 EP round < 1.5 g EP round < 1.6 g Sensing face Sensing face Sensing face Control No File No 3TLJ E glue into hole Ø 12 H11 glue into hole Ø 12 H11 DIN M Programmable 752 bytes Ordering code 2000 bytes Ordering code Note installation instructions on page 174/175! M /A** M /A* Note installation instructions on page 174/175! M /A** M /A* Note installation instructions on page 174/175! M /L** Operating temperature Storage temperature Protection per IEC C C IP C C IP C C IP 67 Mounting Appropriate read/write head with max. read/write distance Supported standard * ISO ISO ** M-302 M mm 0-9 mm mm 0-7 mm M-300 M-302 M mm mm 0-11 mm 0-9 mm 0-7 mm M-300 M-301 M-302 M-304 Tightening torque max. 1 Nm 0-22 mm 0-34 mm 0-16 mm 0-14 mm Simply attach data carrier A single screw is enough and the data carrier is firmly attached. Or simply glue it in place For reliable traceability All data carriers have a 4-byte unique ID contained in the read/write memory. This number is read-only. Read/Write Cycles Data carriers Memory type 752 bytes EEPROM 2000 bytes FRAM Write cycles unlimited Read cycles unlimited unlimited Data retention time 10 years 10 years 138
7 non-metal non-metal non-metal Industrial RFID Systems M Data Carriers Read/Write EP round < 2.5 g PA6 round < 1.3 g PA6 round < 3.0 g Sensing face Sensing face Sensing face M Note installation instructions on page 174/175! Note installation instructions on page 174/175! Note installation instructions on page 174/175! M-300 M-301 M-302 M-304 M /L** C C IP 67 Tightening torque max. 1 Nm 0-32 mm 0-45 mm 0-20 mm 0-18 mm M /L* C C (100 h at 140 C) IP 67 M-300 M-301 M-302 M mm 0-32 mm 0-16 mm 0-14 mm M-300 M-301 M-302 M /L* C C (100 h at 140 C) IP 67 Tightening torque max. 1 Nm 0-28 mm 0-45 mm 0-20 mm Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, 139
8 non-metal Industrial RFID Systems M Data Carriers Read/Write Dimensions Housing material Antenna type Weight 50 3 PA6 round < 9.5 g Sensing face Control No 3TLJ File No E M Programmable 752 bytes Ordering code 2000 bytes Ordering code Operating temperature Storage temperature Protection per IEC M /L* C C (100 h at 140 C) IP 67 Note installation instructions on page 174/175! Mounting Appropriate read/write head with max. read/write distance M-300 M-301 M mm 0-70 mm 0-30 mm Supported standard * ISO ISO ** For greatest flexibility Data carriers in various formats including wafer, cylinder, block or handy credit card format allow for a wide range of applications For reliable traceability All data carriers have a 4-byte unique ID contained in the read/write memory. This number is read-only. Read/Write Cycles Data carriers Memory type 752 bytes EEPROM 2000 bytes FRAM Write cycles unlimited Read cycles unlimited unlimited Data retention time 10 years 10 years 140
9 flush in steel non-metal non-metal Industrial RFID Systems M Data Carriers Read/Write PBT round < 27.0 g PVC round < 5.8 g Sensing face Sensing face M M-300 M-301 M-302 M-304 M /L* C C IP mm 0-12 mm 0-10 mm Note installation instructions on page 174/175! 0-30 mm 0-45 mm 0-20 mm 0-18 mm M-301 M /L** C C IP 60 Note installation instructions on page 174/175! 0 mm Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, More solutions for your application. Contact us
10 Industrial RFID Systems M Data Carriers Read/Write Dimensions Housing material Antenna type Weight For maximum data security in all environments even on metal! Control No 3TLJ File No E M Programmable 2000 bytes Ordering code Operating temperature Storage temperature Protection per IEC Mounting Appropriate read/write head with max. read/write distance Supported standard * ISO Metal mounting plate mm Z-MP-001 please order separately! (10 to a package) Required if no metal substrate is used! For reliable traceability All data carriers have a 4-byte unique ID contained in the read/write memory. This number is read-only. Read/Write Cycles Data carriers Memory type 2000 bytes FRAM Write cycles unlimited Read cycles unlimited Data retention time 10 years 142
11 on metal on metal FERROIDENT PPS-GF40 Rod < 8.0 g Industrial RFID Systems M Data Carriers Read/Write PPS-GF40 Rod < 8.0 g Sensing face Sensing face M M-351 M /A* C C IP 67 Note installation instructions on page 174/175! 0 mm M-351 M /A* C C IP 67 Note installation instructions on page 174/175! 0 mm Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, 143
12 Industrial RFID Systems M Read/Write Heads Dimensions Housing material Antenna type Weight Control No 3TLJ File No E Ordering code Ordering code Mounting in steel Operating temperature Storage temperature Protection per IEC Connection to with connection cable Appropriate data carrier M /L M /L Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance Small size big performance Broad selection range in various form factors offer wide application possibilities. Simply choose according to your application. 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm 30 mm > * For use only with processor M S115! see page 167 ** Please indicate cable length in ordering code! see page
13 Industrial RFID Systems M Read/Write Heads M18 Nickel plated brass round 52 g Sensing face M Note installation instructions on page 174/175! M S115 M S115* non-flush C C IP 67 Processor Z-501-PU1- / E**, Z-502-PU1- / E ** Z-501-PU1- / M**, Z-502-PU1- / M ** Please order cable separately, see page 198 M /L M /A M /A M /A M /L M /L M /L M /A > 80 > 5 > 80 > 5 > 150 > 90 > 20 > 70 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Installation note for data carriers Clear zone Distance to metal 145
14 Industrial RFID Systems M Read/Write Heads Dimensions Housing material Antenna type Weight M18 housing with extra small read/write head: just 14mm provides security For example in tool identification Control No 3TLJ File No E Ordering code Ordering code Mounting in steel Operating temperature Storage temperature Protection per IEC Connection to with connection cable Appropriate data carrier Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm * For use only with processor M S115! see page 167 ** Please indicate cable length in ordering code! see page
15 Industrial RFID Systems M Read/Write Heads M18 Nickel plated brass round 52 g Sensing face M Note installation instructions on page 174/175! > 5 M S115 M S115* non-flush C C IP 67 Processor Z-501-PU1- / E**, Z-502-PU1- / E ** Z-501-PU1- / M**, Z-502-PU1- / M ** Please order cable separately, see page 198 M /L M /L M /A M /A M /A M /A M /A M /A > 80 > 5 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Installation note for data carriers Clear zone Distance to metal 147
16 Industrial RFID Systems M Read/Write Heads Dimensions Housing material Antenna type Weight The large diameter of these tubular read/write enables generous distances to the object. Control No 3TLJ File No E Ordering code Ordering code Mounting in steel Operating temperature Storage temperature Protection per IEC Connection to with connection cable Appropriate data carrier Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm 30 mm 32 mm 35 mm 40 mm 43 mm * For use only with processor M S115! see page 167 ** Please indicate cable length in ordering code! see page
17 Industrial RFID Systems M Read/Write Heads M30 Nickel plated brass round 100 g Sensing face M Note installation instructions on page 174/175! M /L M /L M /A M /A M /L M /L M /L M /L >100 > 5 > 150 > 15 > 90 > 70 > 20 > M S115 M S115* non-flush C C IP 67 Processor Z-501-PU1- / E**, Z-502-PU1- / E ** Z-501-PU1- / M**, Z-502-PU1- / M ** Please order cable separately, see page 198 > 20 > >100 > 5 0 > 5 > 150 > 15 > 90 > 70 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, ± Installation note for data carriers Clear zone Distance to metal 149
18 Industrial RFID Systems M Read/Write Heads Dimensions Housing material Antenna type Weight FERROIDENT PBT and ASA Rod 250 g The right choice when you need a flat design with long read/write distance. FerroIdent head with rod type antenna Simply use the arrows for alignment. For fast positioning Control No File No 3TLJ E Sensing face Note installation instructions on page 174/175! Ordering code Ordering code M S115 Mounting in steel Operating temperature Storage temperature Protection per IEC Connection to with connection cable Appropriate data carrier non-flush C C IP 67 Processor Z-501-PU1- / E**, Z-502-PU1- / E ** Z-501-PU1- / M**, Z-502-PU1- / M ** Please order cable separately, see page 198 M /A M /A Installation note for data carriers Data carrier distance to metal in mm Data carrier clear zone in mm > 200 > 200 > 200 > 200 Distance to metal Clear zone Metallic mounting surface Metallic mounting surface Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm 30 mm 32 mm 35 mm 40 mm 43 mm 45 mm 50 mm 52 mm 60 mm 65 mm 70 mm * For use only with processor M S115! see page 167 ** Please indicate cable length in ordering code! see page
19 Industrial RFID Systems M Read/Write Heads PBT round 410 g Sensing face M Note installation instructions on page 174/175! M /L M /L M /L M /L M /L M /L M /L > 200 > 5 > 200 > 150 > 150 > 200 > 20 M S115 M S115* non-flush C C IP 67 Processor Z-501-PU1- / E**, Z-502-PU1- / E ** Z-501-PU1- / M**, Z-502-PU1- / M ** Please order cable separately, see page 198 > 30 > > 30 > > 30 > > 80 0 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Connector orientation 151
20 Industrial RFID Systems M Read/Write Head with Integrated Processor Dimensions Housing material Antenna type Weight For direct connection to the controller for tight space conditions Control No 3TLJ File No E Supply voltage Current Operating temperature Storage temperature Protection per IEC Connection Interface type: RS232 Balluff Dialog included Please order separately Appropriate data carrier M /L M /L Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm ±9 ±9 > * Please indicate cable length in ordering code! see page 199 Installation note for data carriers Clear zone Distance to metal 152
21 Serial RS232 Industrial RFID Systems M Read/Write Head with Integrated Processor M30 1,5 Nickel plated brass Sensing face M Note installation instructions on page 174/175! 24 V DC +10 %/ 20 % including ripple 50 ma no-load C C IP 67 1 connector, round 8-pin M S115 Configuration software BKS S115-PU- * or BKS S116-PU- * M /A M /A M /A M /A M /L M /L M /L M /L >10 > 80 > 15 > 5 > 80 > 5 > 150 > 90 > 20 > 70 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times,
22 Industrial RFID Systems M Read/Write Head with Integrated Processor Dimensions Housing material Antenna type Weight For longer ranges Integrated version of read/ write head with processor in large form factor. For direct connection to the controller Control No 3TLJ File No E Supply voltage Current Operating temperature Storage temperature Protection per IEC Connection Interface type: RS232 Balluff Dialog included Please order separately Appropriate data carrier Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm 30 mm 32 mm 35 mm * Please indicate cable length in ordering code! see page
23 Serial RS232 Industrial RFID Systems M Read/Write Head with Integrated Processor M30 1,5 Nickel plated brass 100 g Sensing face M Note installation instructions on page 174/175! 24 V DC +10 %/ 20 % including ripple 50 ma no-load C C IP 67 1 connector, round 8-pin M S115 Configuration software BKS S115-PU- * or BKS S116-PU- * M /L M /L M /A M /A M /L M /L M /L M /L 0 > 5 > 150 > 15 > 90 > 70 > 20 > > 20 > > 5 >100 > 5 > 150 > 15 > 90 > 70 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, ± ± ±13 ±13 ±13 Installation note for data carriers Clear zone Distance to metal 155
24 Industrial RFID Systems M Read/Write Head with Integrated Processor Dimensions Housing material Antenna type Weight For tight mounting spaces The remote electronics of the version creates extra installation space. For direct connection to the controller Control No 3TLJ File No E Supply voltage Current Operating temperature Storage temperature Protection per IEC Connection Interface type: RS232 Balluff Dialog included Please order separately Appropriate data carrier Data carrier distance to metal in mm Data carrier clear zone in mm Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm * Please indicate cable length in ordering code! see page
25 Serial RS232 Industrial RFID Systems M Read/Write Head with Integrated Processor M18 1,5 Nickel plated brass round 220 g Sensing face M Note installation instructions on page 174/175! 24 V DC +10 %/ 20 % including ripple 50 ma no-load C C IP 67 1 connector, round 8-pin M S115 Configuration software BKS S115-PU- * M /L M /A M /A M /A M /A >10 > 80 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Installation note for data carriers Clear zone Distance to metal 157
26 Industrial RFID Systems M Read/Write Head with Integrated Processor Dimensions Housing material Antenna type Weight FERROIDENT 80 84,5 40 PBT and ASA Rod 250 g When the available space requires a flat housing, this version is the ideal choice. For direct connection to the controller FerroIdent head with rod type antenna Simply use the arrows for alignment. For fast positioning Control No 3TLJ File No E Sensing face Note installation instructions on page 174/175! Installation note for data carriers Supply voltage Current Operating temperature Storage temperature Protection per IEC Connection Interface type: RS232 Balluff Dialog included Please order separately Appropriate data carrier 24 V DC +10 %/ 20 % including ripple 50 ma no-load C C IP 67 1 connector, round 8-pin M S115 Configuration software BKS S115-PU- * or BKS S116-PU- * M /A M /A Clear zone Data carrier distance to metal in mm Data carrier clear zone in mm > 200 > 200 > 200 > 200 Distance to metal Metallic mounting surface Metallic mounting surface Write distance in mm Read distance in mm Offset in mm at distance 0 mm 5 mm 9 mm 12 mm 15 mm 16 mm 18 mm 20 mm 22 mm 25 mm 30 mm 32 mm 35 mm 40 mm 43 mm 45 mm 50 mm 52 mm 60 mm * Please indicate cable length in ordering code! see page 199 Connector orientation 158
27 Serial RS232 Industrial RFID Systems M Read/Write Head with Integrated Processor PBT round 410 g Sensing face M Note installation instructions on page 174/175! > 80 > 200 > 150 > 150 > 200 > 150 > 150 > V DC +10 %/ 20 % including ripple 50 ma no-load C C IP 67 1 connector, round 8-pin M S115 Configuration software BKS S115-PU- * or BKS S116-PU- * M /L M /L M /L M /L M /L M /L M /L > 20 > 200 > 30 > > 30 > > 30 > Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, ±
28 Industrial RFID Systems M Description Function Housing material Cost-effective identification operate 2 Read/Write Heads simultaneously Data width on the bus, 16 bytes Service friendly, all parameter data are stored in an exchangeable memory Accepts all read/write Control No 3TLJ File No E Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: INTERBUS Remote node INTERBUS Remote node with 2 Mbaud INTERBUS Installation bus INTERBUS Installation bus with 2 Mbaud Please order accessories separately The M-6001 processor features a small form factor and flexible interface options for use wherever ambient conditions require IP 65 protection. These models are ideal also when no aggressive media are used with PS plastic. Small, compact, flexible and cost-effective 160
29 INTERBUS Industrial RFID Systems M M _ KL2 read/write ABS M _ ST8 read/write AlSi 12 M Terminals 1 Pg 9 Terminals 2 Pg 11 2 read/write M-3 M KL2 24 V DC % 10 % 400 ma C C IP 65 2 external yes 2 connectors round 9-pin 2 connectors round 5-pin 2 read/write M-3 M ST9 M ST9M M ST8 M ST8M BKS 23-CS-00 For connectors see page 200 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, The rugged M-6021 with the die-cast aluminum housing is a small, flexible processor which is available with various interface options. Great mechanical stability and high chemical resistance. BKS-S BKS-S Rugged, small and flexible BKS-S Threaded cover BKS 23-CS-00 for M23 connector IP-65 protective cover for unused connectors! 161
30 Industrial RFID Systems M Description Function Housing material Cost-effective identification operate 2 read/write simultaneously Selectable division of the data width on the PROFIBUS-DP, 4 to 128 bytes Free assigning of the data width for each read/write head Optimum data speed, internal cycle time is shorter than the BUS activation time Service friendly, all parameter data are stored in an exchangeable memory BUS address selectable with switches Accepts all read/write Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: PROFIBUS-DP included Please order accessories separately Control No 3TLJ File No E The M-6002 processor features a small form factor and flexible interface options for use wherever ambient conditions require IP 65 protection. These models are ideal also when no aggressive media are used with PS plastic. Small, compact, flexible and cost-effective 162
31 PROFIBUS-DP Industrial RFID Systems M M ST11 read/write ABS M ST14 read/write AlSi 12 M 2 connectors round 5-pin, B-coded 1 connector round 5-pin 2 read/write M-3 M ST11 Software GSD file BKS 12-CS-01 For connectors see page 200/ V DC % 10 % 400 ma C C IP 65 2 external yes 2 connectors round 5-pin, B-coded, 2 connectors round 5-pin 2 read/write M-3 M ST14 Software GSD file BKS 12-CS-01 For connectors see page 200/201 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, The rugged M-6022 with the die-cast aluminum housing is a small, flexible processor which is available with various interface options. Great mechanical stability and high chemical resistance. Rugged, small and flexible BKS-S BKS-S Threaded cover BKS 12-CS-01 coded for M12 B connector type BKS-S
32 Industrial RFID Systems M Description Function Housing material Cost-effective identification operate 2 read/write simultaneously Freely selectable buffer size between 0 and 256 bytes Service friendly, all parameter data are stored in an exchangeable memory Accepts all read/write Control No 3TLJ File No E Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: DeviceNet included Please order accessories separately The M-6003 processor features a small form factor and flexible interface options for use wherever ambient conditions require IP 65 protection. These models are ideal also when no aggressive media are used with PS plastic. Small, compact, flexible and cost-effective 164
33 DeviceNetTM Industrial RFID Systems M M _ ST12 read/write ABS M _ ST13 read/write AlSi 12 M 3 connectors round 5-pin, 2 read/write M-3 M ST12 Software EDS file For connectors see page 200/204/ V DC % 10 % 400 ma C C IP 65 2 external yes 4 connectors round 5-pin 2 read/write M-3 M ST13 Software EDS file For connectors see page 200/203 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, The rugged M-6023 with the die-cast aluminum housing is a small, flexible processor which is available with various interface options. Great mechanical stability and high chemical resistance. BKS-S BKS-S Rugged, small and flexible BKS-S BKS-S 98-R
34 Industrial RFID Systems M Description Function EtherNet/IP TM M ST19 read/write Control No 3TLJ File No E Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: EtherNet/IP included Please order accessories separately 24 V DC % 10 % 400 ma C C IP 65 2 external yes Connector round 4-polig, D-coded 1 connector 5-pin 1 connector 4-pin 2 read/write M-3 M ST19 Configuration software For connectors see page 200/202 Cost-effective identification operate 2 read/write simultaneously! Rugged processor for EtherNet/IP networks BKS-S BKS-S
35 EtherNet TCP/IP Description Function Industrial RFID Systems M M S115 read/write Control No File No 3TLJ E M Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: Ethernet TCP/IP included Please order accessories separately 24 V DC % 10 % 150 ma C C IP 67 1 external no 1 connector round 4-pin, D-coded 1 connector round 5-pin 1 read/write head M _ M S115 Configuration software For connectors see page 200/202 Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Small and compact for one read head Easy to connect to any PC-based controller! For use only with these read M S115 M S115 M S115 M S115 see page 145/147/149/
36 Industrial RFID Systems M Description Function Housing material M _ ST23 read/write ABS PROFINET Control No File No 3TLJ E Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: PROFINET RT with IRT-capable 2-PORT switch included Please order accessories separately 24 V DC % 10 % 400 ma C C IP 65 2 external yes internal Connector round 5-pin, A-coded 2 connectors 4-pin, D-coded M-3 Exception C-350 and C-355 M ST23 Configuration software For connectors see page 200/202 Cost-effective identification operate 2 read/write simultaneously! Please order accessories separately! Adapter cable for PROFINET from M12 D-coded to coupling RJ45/RJ45 C-526-PVC-00.5 page
37 PROFINET Description Function Housing material Industrial RFID Systems M M ST22 read/write Al Control No File No 3TLJ E M Supply voltage Ripple Current Operating temperature Storage temperature Protection per IEC head ports Service interface RS232 Connection Connection for Interface type/software: PROFINET RT with IRT-capable 2-PORT switch included 24 V DC % 10 % 400 ma C C IP 65 2 external yes 1 connector 5-pin, Push-pull RJ45 AIDA 2 connectors 8-pin, Push-pull RJ45 AIDA Connector round 4-pin M-3 Exception C-350 and C-355 M ST22 Configuration software Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, 169
38 Industrial RFID Systems M Handy Programmer Function Housing material read/write ABS Ordering code Keyboard Display Current Capacity Interface Operating temperature Protection per DIN head option included Appropriate data carrier Please order additional accessories separately M buttons, alphanumeric LCD display, 20 characters/4 lines 2.4 V rechargeable battery pack NiMH 1650 ma/h RS232/Balluff Dialog C IP 40 Carrying case M-101 M-102 M-105 M-108 M-110 M-111 M-112 M-120 Charging power supply For maximum flexibility The Handy Programmer with read/write function makes you mobile and independent. Ideal for example in maintenance work. Needless to say, the handy programmer is fitted with an interface for connection to a PC. Rechargeable battery 1500 mah Charger C-701-A Charging cradle with charging power supply C-702-A
39 Industrial RFID Systems M Handy Programmer read/write ABS read/write ABS M M buttons, alphanumeric LCD display, 20 characters/4 lines 2.4 V rechargeable battery pack NiMH 1650 ma/h RS232/Balluff Dialog C IP 40 via panel connector from standard M-3... read/write Carrying case M-101 mit M / M M-102 mit M / M M-105 mit M / M M-120 mit M Charging power supply M buttons, alphanumeric LCD display, 20 characters/4 lines 2.4 V rechargeable battery pack NiMH 1650 ma/h RS232/Balluff Dialog C IP 40 M18 Carrying case M-101 M-102 M-105 M-108 M-110 M-111 M-112 M-122 Charging power supply Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, 171
40 Industrial RFID Systems M Function Housing material For enhanced operating convenience Allows portable writing and reading of M data carriers. Easy operation thanks to Touchscreen with large color Windows CE display and Pre-installed Balluff software and keyboard or stylus. Ideal for poor light conditions and challenging environments! Data transfer via optional WLAN, Bluetooth or wired USB. The is also modular for expandability. Additional convenience A pistol grip is provided for ergonomic comfort. Standard Ordering code Standard + WLAN (802.11b&g) Ordering code Standard + Barcode Scanner Ordering code Standard + WLAN (802.11b&g) + Barcode Scanner Ordering code Keyboard Display Current Capacity Interface Operating temperature Protection per IEC head option included Appropriate data carrier Please order additional accessories separately Standard M x-000 Includes charger and stylus 172
41 Industrial RFID Systems M read/write ABS M M x-000 M x-001 M x-002 M x buttons, alphanumeric TFT Touchscreen display 3.7 V rechargeable battery pack 4000 ma/h RS232/Balluff Dialog C IP 65 Charging power supply and stylus M-1... M-2... Docking Station and Pistol Grip Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Pistol Grip Docking Station with power supply
42 Industrial RFID Systems M Installation Notes Minimum distance between two data carriers M-300 M-301 M-302 M-304 M S115 M S115 M S115 M-351 M S115 M /L M /L 0 mm 0 mm 0 mm M /L 0 mm > 200 mm 0 mm 0 mm 0 mm > 200 mm 0 mm M /A M /A 0 mm > 200 mm 0 mm 0 mm 0 mm > 200 mm 0 mm M /L M /L > 150 mm > 200 mm 0 mm 0 mm > 150 mm > 200 mm 0 mm M /A M /A 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm M /A 0 mm > 200 mm 0 mm 0 mm 0 mm > 200 mm 0 mm M /L 0 mm 0 mm M /A M /A 0 mm 0 mm Minimum distance between two read/write M-300 M-301 M-351 M-302 M-304 M S115 M S115 M S115 M S mm 600 mm 600 mm 100 mm 100 mm 200 mm 600 mm 600 mm 100 mm Mounting the read/write on metal frames If the read/write are mounted so that they are joined through an enclosed metal frame, mutual interference may result (conductor loop). This may reduce the read/write distances. The smaller the read/write head, the less the interference. This may result in a reduction of the maximum distance by 80 %. In such a case you should test the actual effective read distance. head Metal frame 174
43 Industrial RFID Systems M Installation Notes Clear zone dimensions for read/write head M M M M M M M M M Data carriers with clear zone dimensions (in mm) M /L M /L M /L M /L M /A M /A A C A C A C M /L A C M /A M /A A C M Mechanical Strength Data carriers and read/write Ordering code Shock load Vibration Ordering code M-1, M g/6 ms per EN and 100 g/2 ms per EN g, Hz per EN M-6 _ Range of Applications Selection Criteria Data carriers with processor Handy Programmer Installation times, Shock load Vibration 15 g/11 ms per EN and 15 g/6 ms per EN g, Hz per EN
44 Industrial RFID Systems M Times Memory access Our processors can read or write each individual byte in the data carrier. But since the data carrier is divided into 16-byte blocks, the actual reading and writing is done by blocks. Our processor electronics converts this time accordingly. To calculate the times the block read or write time must however be used. Data carrier recognition 20 ms are required to recognize a data carrier. Read Times M-1 Write Times M-1 Example EEPROM Data carrier with 16 byte blocks Byte read time [ms] from 0 to for each additional 16 bytes started add an additional 10 Data carrier with 16 byte blocks Byte write time [ms] from 0 to for each additional 16 bytes started add an additional 30 Read and write 183 bytes starting at address 42 Address 42 is in Block 3 (42/16) Address 224 is in Block 14 (224/16) FRAM Data carrier with 16 byte blocks Byte read time [ms] from 0 to for each additional 16 bytes started add add an additional 15 Data carrier with 16 byte blocks Byte writetime [ms] from 0 to for each additional 16 bytes started add add an additional 40 Therefore a total of 12 blocks will be processed, where the first block always has a slightly longer read or write time. Read time Write time = 20 ms + 11* 10 ms = 130 ms = 40 ms + 11* 30 ms = 370 ms Attention! Fluctuations in the ms range are possible. Electrical noise effects may increase the read/write time. 176
45 Industrial RFID Systems M Version Use Access protection Attachment for read/write head M-304 Data carrier + Bracket Sensing face M Range of Applications Selection Criteria Ordering code Protection per IEC Ambient temperature range Storage temperature Access protection The benefits Z-ZA C C M /A-ZC1 IP C C Data carriers with processor Handy Programmer Installation times, And here's how it works Individual access codes are allocated via programmable data keys, which can then be disabled to prevent further programming. Unauthorized personnel cannot manipulate the data key as a result. The data key is read via an antenna fitted to a special bracket and the processor unit then issues the data. Different interfaces such as serial, PROFIBUS, INTERBUS, DeviceNetTM, Ethernet/IP or parallel interfaces enable simple connection to the monitored system. Available for systems C, L and M. The programmable data key allows upgrades or replacements without requiring modifications to the system software. End users are independent of system providers. The access system is easy to integrate in read/write stations that already use an identification system. Simply connect the access monitoring antenna to the second channel on the existing processor unit. Hardware expenses are reduced to a minimum and software only requires slight modification in order to process both channels. Electronic key for access control. Easy to implement using the "RFID key" 177
46 178
BIS L Industrial RFID System
125 khz LF Inductive Identification BIS L Industrial RFID System The cost-effective BIS L is used in logistics and on assembly lines. It uses a LF 125 khz technology along with passive tags to provide
More informationBIS L Industrial RFID System
125 khz LF Inductive Identification BIS L Industrial RFID System The BIS L system uses a Low Frequency or LF 125KHz inductively coupled technology along with passive tags to provide shorter range RFID
More informationIdentification Systems BIS L.... non-contact data communication at 125 khz
Identification... non-contact data communication at 125 khz Balluff is a world leader in the field of sensor technology. Our product range includes electronic and electromechanical sensors, transducers
More informationRFID systems for production
MOBY E Function MOBY identification systems ensure that important data accompanies the product from the very beginning. Mobile data memories ("electronic goods notes") are used in place of barcodes and
More informationUHF Industrial Identification BIS U RFID for manufacturing and logistics
UHF Industrial Identification BIS U RFID for manufacturing and logistics UHF based RFID can track assets with greater range and flexibility In today s manufacturing environments, knowing where both parts
More informationIndustrial Identification. Systems for manufacturing, logistics and distribution
11001110100101101111010001011011101000 11101010110111101001110100010011001011 01111010001011011101000111010010110110 01101000101100110111101000101101110100 01011011101000101011111010001011011100 11101000101101111010001011011101000111
More informationmobile data carrier TW-R16-B128 Phone: Fax: Web: -
Mobile data carrier TW-R6-B28 mobile data carrier read/write compatible with a series of BL ident read-write heads (see data sheet or compatibility table) EEPROM, memory size 28 bytes Type TW-R6-B28 Ident-No.
More informationRFID systems for the HF frequency range
Siemens AG 01 RFID systems for the HF frequency range / RFID systems introduction /7 RFID systems for the HF frequency range /7 SIMATIC RF00 /9 SIMATIC RF00 transponders /61 MDS D165 /61 MDS D61 /63 MDS
More informationBOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationFork sensors and optical windows
Fork sensors and optical windows Experts in small part detection and counting tasks FGL-RK LED red light fork sensors from Page 548 Precise small part detection from 0. mm Indicator LEDs with all-round
More informationLow frequency High frequency
Low-frequency Technology Highlights: ü All-metal components for aggressive operating environments ü Embeddable transponders ü Transponders can be written to and read through metal ü Memory of transponders:
More informationBIS L x-07-S4
BIS L-409-045-00x-07-S4 Quick Guide 41 English www.balluff.com 1 2 3 4 5 Notes to the user 5 1.1 bout this manual 5 1.2 Structure of the manual 5 1.3 Typographical conventions 5 1.4 Symbols 5 1.5 bbreviations
More informationGX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
More informationCylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General
More informationIdentification System CIS3A-Mini
Inductive Identification System CISA-Mini One of the smallest plug-in read heads Interface adapter for fitting on the DIN rail in the control cabinet Miniature data carrier, diameter 10 x 4 mm Read distance
More informationSiemens AG 2010 SIMATIC RF300. RFID system in the HF range. Brochure September SIMATIC Sensors Ident. Answers for industry.
SIMATIC RF300 RFID system in the HF range Brochure September 2010 SIMATIC Sensors Ident Answers for industry. SIMATIC RF300 RFID system in the HF range SIMATIC RF300 increases productivity through shorter
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationBVS UR E Ordering code: BVS001H
BVS UR-3-101-E Ordering code: BVS001H Vision sensor BVS-E Universal PNP (2x) 1) Teach reference image, 2) Power, 3) Output 1 active, 4) Output 2 active, 5) Connection with PC, 6) Sharpness Characteristic
More informationHandheld Programmer mer BIS
mer BIS M-87_ Quick Guide english www.balluff.com 1 2 3 4 5 User Instructions 4 1.1 CE Declaration of Conformity and user safety 4 1.2 Scope of Delivery 4 1.3 About this manual 4 1.4 Manual organization
More informationFerrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationIdentsystem CIS3/CIS3A
Identsystem CIS3/CIS3A EUCHNER GmbH + Co. Phone +49/711/75 97-0 P.O. Box 10 01 52 Fax +49/711/75 33 16 D- 70745 Leinfelden-Echterdingen www.euchner.de Germany info@euchner.de Your Partner for Industrial
More informationRFID systems for logistics
MOBY D Introduction MOBY D is a new RF identification system based on the Standard 15693 in the 13.56 MHz range. For the first time, the standard creates a common basis for SmartLabels from different manufacturers
More informationDescription of parts Panel mounting Insert mounting without/with Carrier element Plastic housings
- Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationSafety. Detection. Control. MAGNUS RFID ENG - REV
03 2017 1 Next generation RFID safety sensor 03 2017 2 03 2017 3 Next generation sensors for machine safety RFID safety sensors PL e, SIL 3 The application of Magnus RFID sensors can be extremely wide
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationMagnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
More informationTW-R7.5-B PCS. EEPROM, memory 128 byte. Functional principle The HF read/write heads operating at a frequency of MHz, form a transmission
EEPROM, memory 12 byte Functional principle The HF read/write heads operating at a frequency of.56 MHz, form a transmission zone the size of which (0 500 mm) varies, depending on the combination of read/write
More informationstandard, short, preferential, top
ipf electronic gmbh Kalver Straße 27 standard design short design preferential series top series standard, short, preferential, top norm sensing ranges, increased sensing ranges 1100 1 2 1100 norm sensing
More informationProduct Overview Automation
EN DE Product Overview Automation Automation at a glance Ident Systems CIS3 CIS3A CIS3A - Mini Read system Read/write system Read system Read/write system Read system Read/write system Head Evaluation
More informationGL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost.
811 Compact & ow Price Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.176~ guide... P.781~ General precautions... P.179~ PHOTO PHOTO MEASURE
More informationRFH620 RFID Proximity Interrogator
P r o d u c t i n f o r m at i o n RFH620 RFID Proximity Interrogator Powerful and adaptable for intelligent logistics and factory automation solutions PDF processed with CutePDF evaluation edition www.cutepdf.com
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More informationPowerDRIVE-Box GEL 6505 Interface for controlling up to 5 positioning drives
PowerDRIVE-Box GEL 6505 Interface for controlling up to 5 positioning drives Technical information Version 208-05 GEL 6505A: Box for top hat rail mounting, IP 20 variant General The PowerDRIVE-Box GEL
More informationProximity sensors, block design
Proximity sensors, block design Proximity sensors, block design Product range overview Measuring principle Version Type Mounting Switching element function Switching Electrical connection N/O contact N/C
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 3B Standard Dimensioned drawing We reserve the right to make changes DS_HRTR3B_Standard_en_51734.fm en 13-213/3 51734 1-3 V DC 1 khz A 2 LS 5 4mm 2mm with black-white
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability
82 PHOTO PHOTO Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.86~ Sensor selection guide... P.757~ General precautions...
More informationVM series. features. web contents. code description. available models. inductive sensors. Cylindrical M12 in AC B H
VM series Cylindrical M2 in AC inductive sensors warranty features warranty Output: cable and M2 plug cable exit Models with 2 wires IP67 protection degree Multivoltage 20...253 Vac web contents Application
More informationInductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationAccessories Bus Terminals
Accessories s Connectors Lightbus Z1000 Z1010 Z1020 standard connector for 1,000 µm plastic fibre standard connector for 200 µm PCS fibre coupling for Z1000 PROFIBUS ZB3100 ZB3101 ZB3102 ZS1031-3000 ZS1031-3500
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability. IP67G sensor head variations
875 PHOTO PHOTO IT FOW PARTICUAR Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.482~ Sensor selection guide... P.80~
More information11 PROFIBUS Fieldbus Connector
750-960 PROFIBUS Fieldbus Connector 634 54 mm> < < 45mm 5 < 36,7mm < 372 mm < 54 mm < 36 mm / 42 in < 5-6 mm / 022 in < 0 mm / 0394 in The fieldbus connector links a PROFIBUS device
More informationDistance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
More informationTECHNICAL BULLETIN [ 1 / 11 ]
TECHNICAL BULLETIN [ 1 / 11 ] [Title] Product discontinuation of ID system D-2N series [Date of Issue] June 2009(Ver. B: April 2015) [Relevant Models] ID system D-2N series Thank you for your continued
More informationBL compact fieldbus station for DeviceNet 16 Configurable Digital PNP Channels BLCDN-16M8L-8XSG-P-8XSG-P
Type designation Ident-No. 6811073 Nominal system voltage System power supply Admissible range V+ Nominal current V+ Max. current V+ Electrical isolation Via DeviceNet 18 30VDC 430 ma 4 A The 8XSG I/O
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationAccessories Fieldbus Box
Power cables, sensor cables, connection cables and further accessories see the EtherCAT Box chapter from page 514 Pre-assembled cables for fieldbus components include a wide range of cable assemblies.
More informationSIMATIC Ident RFID systems MDS D423 Compact Operating Instructions
SIMATIC Ident RFID systems Compact Operating Instructions Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationFork sensors and optical windows
Fork sensors and optical windows Experts in small part detection and counting tasks FGL-RK LED red light fork sensors from Page 534 FGL-IK infrared fork sensors from Page 536 FGL LED red light fork sensors
More informationFLM DI 8 M12. Function. Fieldline Modular Device With Eight Digital Inputs. Data Sheet
Fieldline Modular Device With Eight Digital Inputs Data Sheet 697000 02/2004 This data sheet is only valid in association with the FLS FLM SYS INST UM E user manual or the user manual for your bus system
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Data Sheet 4000 Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology Brief description
More informationBIS M _ 0 _ -07-S4 BIS M _ 0 _ -07-S4
BIS M-4-045- _ 0 _ -07-S4 BIS M-4-072- _ 0 _ -07-S4 Technical Description, Operating Manual english www.balluff.com 1 User Instructions 5 1.1 Conformity and User Safety 5 1.2 Scope of Delivery 5 1.3 About
More informationBTL6-A_10-M -A1-S115. Data Sheet. english
BT6-A_10-M -A1-S11 english Data Sheet Balluff GmbH Schurwaldstrasse 9 76 Neuhausen a.d.f. Germany Phone +49 (0) 71 8/1-0 Fax +49 (0) 71 8/0 10 Servicehotline +49 (0) 71 8/1-70 E-Mail: balluff@balluff.de
More informationHardened 4-Port 10/100/1000M DIN-Rail Mount Switch GATB. User's Manual (V1.0 Version)
Hardened 4-Port 10/100/1000M DIN-Rail Mount Switch 065-7404GATB User's Manual (V1.0 Version) 1 Overview The Signamax 065-7404GATB industrial Ethernet switches are entry-level industrial 4-port Ethernet
More informationProduct Overview ManMachine
Product Overview ManMachine EN ManMachine Electronic-Key-System EKS RS232 seriell ETHERNET pproval Features/specific advantages Version FS FS FS compact compact compact compact (P 6 GF3 gray) (P 6 GF3
More informationHandheld Programmer BIS M-87_
Technical Description, User's Guide english www.balluff.com 1 2 3 4 5 6 User Instructions 4 1.1 CE Declaration of Conformity and User Safety 4 1.2 Scope of delivery 4 1.3 About this manual 4 1.4 Structure
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationINJ-24A Series Quick Installation Guide
INJ-24A Series Quick Installation Guide Moxa High-Power PoE+ Injector Edition 4.1, August 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationSensor boxes SRBG Key features
Key features Function SRBG sensor boxes are the compact solution when it comes to electrical feedback signals and monitoring the position of process valves which are actuated with pneumatic quarter turn
More informationTW-R50-B128. EEPROM, memory 128 byte. Functional principle The HF read/write heads operating at a frequency of MHz, form a transmission
EEPROM, memory 128 byte Functional principle The HF read/write heads operating at a frequency of 13.56 MHz, form a transmission zone the size of which (0 500 mm) varies, depending on the combination of
More informationSMARTLIGHT The future of stack light and process visualization
SMARTLIGHT The future of stack light and process visualization Multi-purpose Tower Light SmartLight is the first programmable LED signal tower light. With a rich color spectrum, adjustable light intensity
More informationXPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name
Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018
More informationPHOENIX CONTACT - 05/2007
Ex Universal Module Carrier (Motherboard) for Accommodating 3-Wire Measuring Transducers, Intrinsically Safe, for a Maximum of 8 PI Ex Modules INTERFACE Data Sheet 103030_00_en PHOENIX CONTACT - 05/2007
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationPowertrain Assembly Transparency and efficiency in manufacturing and installation
Your complete provider for Systems and Service From the design and planning of your projects To testing and setup on-site To training and support Vision sensors BVS For automated quality assurance The
More informationSITRANS T measuring instruments for temperature
Overview for flexible and cost-effective temperature measurements Supports the standard (HART V 7.1) Very high security level for wireless data transmission Built-in local user interface (LUI) with -button
More informationOperator panels Advanced HMI Panel-based Mobile Panels
Siemens AG 018 nd Generation Overview Mobile Mobile F Mobile Mobile F Mobile nd Generation Technical specifications General information 6AV15-DB3-6AV15-GB03-6AV15-GB3- F 6AV15-JB03-6AV15-JB3- F Product
More informationSafety switches with manual mechanical delay and separate actuator
D Safety switches with manual mechanical delay and separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF VF KEYF VF KEYF7 VF KEYF ACTUATORS MECHANICAL DELAY C L L0 Short knob 0 sec. Short knob sec.
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationProfibus-DPV1 Set in IP67 TI-BL67-DPV1-6
Type designation Ident no. 1545030 Number of channels 6 Dimensions (W x L x H) 172 x 145 x 77.5 mm Cable max. 50 m between interface and read/write head 3 decimal rotary coding switches for the adjustment
More informationKit for Simple I/O Communication via Ethernet Modbus/TCP/ EtherNet/IP / PROFINET in IP67 TI-BL67-EN-S-8
Type code Ident no. 1545153 Number of channels 8 Dimensions (W x L x H) 204 x 145 x 77.5 mm A special software (function module) for integration in PLC systems is not required. Cable max. 50 m between
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationNon-Contact Connectors Contents
Inductive Couplers Inductive Couplers Balluff non-contact connectors are extremely suitable for the quick connection and disconnection of modules without disturbing communication at the fieldbus levels.
More informationElectronic Level Switch ENS 3000
Electronic Level Switch ENS 3000 Description: The ENS 3000 is an electronic level switch with integrated display. The instrument has 1, 2 or 4 switching outputs and an analogue output signal is available
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationPhotoelectrics Retro-reflective, Polarized Type PA18C.P..., DC
Photoelectrics Retro-reflective, Polarized Type PA18C.P..., DC Miniature sensor range Range: 5 m (axial), 4 m (radial) Sensitivity adjustment by potentiometer Modulated, red light 625 nm Supply voltage:
More informationPhotoelectrics Retro-reflective Type PA18C.R..., DC
Photoelectrics Retro-reflective Type PA18C.R..., DC Miniature sensor range Range: 6.5 m (Axial), 5 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to
More informationE3Z. The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly
Compact Photoelectric Sensor with Built-in Amplifier EZ The New Standard for Compact, Long-range Photoelectric Sensors Conserves Energy and Natural Resources, One Million Sold Yearly Long sensing distance
More informationOil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
More informationOnline data sheet. S30A-7021EK S3000 Anti Collision SAFETY LASER SCANNERS
Online data sheet S30A-7021EK S3000 Anti Collision A B C D E F system plug not supplied with delivery Ordering information Type Part no. S30A-7021EK 1071544 Usage Can only be used in the EFI system network,
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationMInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationSiemens AG 2012 SIMATIC RF200. RFID system in the HF range. SIMATIC Ident. Edition November Brochure. Answers for industry.
SIMATIC RF200 RFID system in the HF range SIMATIC Ident Brochure Edition November 2012 Answers for industry. SIMATIC RF200 The compact RFID system in the HF frequency range SIMATIC Ident maximum flexibility
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationBNI PBS Z001. IP67 module, Profibus IO-Link Master Short Guide
BNI PBS-502-001-Z001 IP67 module, Profibus IO-Link Master Short Guide 1 Notes for the User 1.1 About this guide 2 1.2 Structure of the guide 2 1.3 Typografical conventions 2 1.3.1 Enumerations 2 1.3.2
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions...
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 0--9 07:6 Date of issue: 0-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More information