PX7. User Manual. PCIe Mini Card to M.2 Adapter. PCI Express Mini Card

Transcription

1 20PX07-00 E PX7 PCIe Mini Card to M.2 Adapter PCI Express Mini Card User Manual

2 Contents Contents Contents About this Document Product Safety Legal Information Product Overview Product Description Product Architecture Interfaces Functions Technical Data Product Identification Getting Started Configuring the Hardware Installing an M.2 Card Connecting and Starting Installing Driver Software Functional Description Power Supply Wireless Functionality PCI Express Mini Card M.2 Card Figures Figure 1. Board layout top view Figure 2. Functional diagram Figure 3. Product labels Figure 4. Installing the PCI Express Mini Card (example only) Tables Table 1. Pin assignment PCI Express Mini Card (PCIe and USB 2.0) Table 2. Signal mnemonics PCI Express Mini Card Table 3. Pin assignment M.2 Card (USB 2.0 and USB 3.0) Table 4. Signal mnemonics PCI Express M.2 Card connector PX07-00 E Page 2

3 About this Document About this Document This user manual is intended only for system developers and integrators, it is not intended for end users. It describes the design, functions and connection of the product. The manual does not include detailed information on individual components (data sheets etc.). PX7 product page with up-to-date information and downloads: History Issue Comments Date E1 First issue PX07-00 E Page 3

4 About this Document Conventions Indicates important information or warnings concerning situations which could result in personal injury, or damage or destruction of the component. Indicates important information concerning electrostatic discharge which could result in damage or destruction of the component. Indicates important information or warnings concerning proper functionality of the product described in this document. The globe icon indicates a hyperlink that links directly to the Internet. When no globe icon is present, the hyperlink links to specific information within this document. Italics Comment IRQ# /IRQ In/Out 0xFF 0b1111 Folder, file and function names are printed in italics. Comments embedded into coding examples are shown in green text. Signal names followed by a hashtag "#" or preceded by a forward slash "/" indicate that this signal is either active low or that it becomes active at a falling edge. Signal directions in signal mnemonics tables generally refer to the corresponding board or component, "in" meaning "to the board or component", "out" meaning "from the board or component". Hexadecimal numbers are preceded by "0x". Binary numbers are preceded by "0b". 20PX07-00 E Page 4

5 Product Safety Product Safety Electrostatic Discharge (ESD) Computer boards and components contain electrostatic sensitive devices. Electrostatic discharge (ESD) can damage components. To protect the PCB and other components against damage from static electricity, you should follow some precautions whenever you work on your computer. Power down and unplug your computer system when working on the inside. Hold components by the edges and try not to touch the IC chips, leads, or circuitry. Use a grounded wrist strap before handling computer components. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. Only store the product in its original ESD-protected packaging. Retain the original packaging in case you need to return the product to MEN for repair. 20PX07-00 E Page 5

6 Legal Information Legal Information Changes MEN Mikro Elektronik GmbH ("MEN") reserves the right to make changes without further notice to any products herein. Warranty, Guarantee, Liability MEN makes no warranty, representation or guarantee of any kind regarding the suitability of its products for any particular purpose, nor does MEN assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including, without limitation, consequential or incidental damages. TO THE EXTENT APPLICABLE, SPECIFICALLY EXCLUDED ARE ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW, CUSTOM OR USAGE, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE. In no event shall MEN be liable for more than the contract price for the products in question. If buyer does not notify MEN in writing within the foregoing warranty period, MEN shall have no liability or obligation to buyer hereunder. The publication is provided on the terms and understanding that: 1. MEN is not responsible for the results of any actions taken on the basis of information in the publication, nor for any error in or omission from the publication; and 2. MEN is not engaged in rendering technical or other advice or services. MEN expressly disclaims all and any liability and responsibility to any person, whether a reader of the publication or not, in respect of anything, and of the consequences of anything, done or omitted to be done by any such person in reliance, whether wholly or partially, on the whole or any part of the contents of the publication. Conditions for Use, Field of Application The correct function of MEN products in mission-critical and life-critical applications is limited to the environmental specification given for each product in the technical user manual. The correct function of MEN products under extended environmental conditions is limited to the individual requirement specification and subsequent validation documents for each product for the applicable use case and has to be agreed upon in writing by MEN and the customer. Should the customer purchase or use MEN products for any unintended or unauthorized application, the customer shall indemnify and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim or personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that MEN was negligent regarding the design or manufacture of the part. In no case is MEN liable for the correct function of the technical installation where MEN products are a part of. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. 20PX07-00 E Page 6

7 Legal Information Conformity MEN products are no ready-made products for end users. They are tested according to the standards given in the Technical Data and thus enable you to achieve certification of the product according to the standards applicable in your field of application. RoHS Since July 1, 2006 all MEN standard products comply with RoHS legislation. Since January 2005 the SMD and manual soldering processes at MEN have already been completely lead-free. Between June 2004 and June 30, 2006 MEN s selected component suppliers have changed delivery to RoHS-compliant parts. During this period any change and status was traceable through the MEN ERP system and the boards gradually became RoHS-compliant. WEEE Application The WEEE directive does not apply to fixed industrial plants and tools. The compliance is the responsibility of the company which puts the product on the market, as defined in the directive; components and subassemblies are not subject to product compliance. In other words: Since MEN does not deliver ready-made products to end users, the WEEE directive is not applicable for MEN. Users are nevertheless recommended to properly recycle all electronic boards which have passed their life cycle. Nevertheless, MEN is registered as a manufacturer in Germany. The registration number can be provided on request. Copyright 2018 MEN Mikro Elektronik GmbH. All rights reserved. Germany MEN Mikro Elektronik GmbH Neuwieder Straße Nuremberg Phone France USA China MEN Mikro Elektronik SAS 18, rue René Cassin ZA de la Châtelaine Gaillard Phone MEN Micro Inc. 860 Penllyn Blue Bell Pike Blue Bell, PA Phone MEN Mikro Elektronik (Shanghai) Co., Ltd. Room , Jiaxing Mansion, No. 877 Dongfang Road Shanghai Phone sales@men-china.cn info@men.de info@men-france.fr sales@menmicro.com 20PX07-00 E Page 7

8 Product Overview 1 Product Overview 1.1 Product Description PCI Express Mini Card to M.2 Adapter The PX7 is a PCI Express Mini Card designed for converting form factor PCI Express Mini to M.2. In addition, it converts PCIe x1 on the PCI Express Mini side into USB 3.0 featured on the M.2 side. USB 3.0 Extension for Box PCs Typically, box PCs from MEN are equipped with PCI Express Mini Card slots which support PCIe x1 and USB 2.0 but not USB 3.0. The PX7 extends the capability of the box PC families by enabling the use of USB 3.0 devices (i.e. LTE-Advanced Modem) in M.2 form factor. The PX7 also supports one SIM card integrated in the box PCs. Fit for the Future The PX7 is the ideal solution for LTE Advanced, as it supports transmission rates of up to 500 Mbit/s (Cat 11/Cat 12). Optionally, the PX7 is also available as a USB 2.0 solution for slower LTE modems (Cat 6). Conduction Cooling Option MEN also offers a conduction cooled version of the PX7 including an LTE modem for the use within box PCs. 20PX07-00 E Page 8

9 Product Overview 1.2 Product Architecture Interfaces Figure 1. Board layout top view PCI Express Mini Card connector M.2 connector Functions Figure 2. Functional diagram B Onboard Options Conduction Cooling Frame SIM card signals USB 2.0 PCI Express Mini Card connector PCIe x1 USB 3.0 Host Controller USB 2.0 USB 3.0 M.2 connector M.2 device, e.g., LTE Advanced Modem B B 20PX07-00 E Page 9

10 Product Overview 1.3 Technical Data Wireless Functionality Possible wireless functions: - LTE, WLAN Interfaces M.2 Card - 1x M.2 Card slot - M (LTE) socket 2 Key B; USB 2.0, USB 3.0 Product Standard PCI Express Mini Card: Full-Mini; PCIe x1, USB 2.0 Electrical Specifications Supply voltage V (-5 % / +5 %) V aux (-5 % / +9 %) Power consumption - 1 W max., without M.2 module installed Mechanical Specifications Dimensions - PCI Express Full-Mini Card Weight: 6 g approx. Cooling - Air cooling, forced convection, airflow 1.0 m/s - Conduction cooling possible (optional) Environmental Specifications Temperature range (operation) C to +85 C, compliant with EN 50155:2007, class TX Temperature range (storage): -40 C to +85 C Relative humidity (operation): max. 95% non-condensing Relative humidity (storage): max. 95% non-condensing Altitude: -300 m to m Shock: EN ( ) / EN category 1 class B body mounted Vibration: EN ( ) / EN category 1 class B body mounted Reliability MTBF: C according to IEC/TR (RDF 2000) (model 15PX07-00) Safety Electrical Safety - EN (former EN ) Flammability (PCBs) - UL 94 V-0 20PX07-00 E Page 10

11 Product Overview EMC EN 55032, EN (radio disturbance) IEC (ESD) EN 55024, EN (electromagnetic field immunity) EN 55024, EN (burst) EN (surge) EN 55024, EN (conducted disturbances) Software Support Windows See the MEN website for supported operating system versions, available software and more details on supported functions: Product Identification MEN documentation may describe several different models and design revisions of the PX7. You can find the article number, design revision and serial number affixed to the PX7. Article number: Indicates the product family and model. This is also MEN s main ordering number. To be complete it must have 9 characters. Revision number: Indicates the design revision of the product. Serial number: Unique identification assigned during production. If you need support, you should communicate these numbers to MEN. Figure 3. Product labels Complete article number Revision number Serial number 20PX07-00 E Page 11

12 Getting Started 2 Getting Started 2.1 Configuring the Hardware Check your hardware requirements before mounting the PX7. Modifications are difficult or impossible to do when the PX7 is mounted Installing an M.2 Card To install an M.2 card, the following steps are necessary.» Power down your system and remove the PX7 from the system.» Put the board on a flat surface.» Align the M.2 card properly at a 30 angle to the M.2 connector on the PX7. M.2 card Card connector 30» Firmly push the M.2 card down while plugging it in the M.2 connector on the PX7.» Fasten the card to the board from the top side using a M3x4 screw. 20PX07-00 E Page 12

13 Getting Started 2.2 Connecting and Starting You can use the following check list when installing the card in a system for the first time and with minimum configuration. The installation of the PX7 depends on the carrier board. Please refer to your carrier board s user manual before installing the PX7.» Power down the system and remove the PCI Express Mini Card carrier board.» Install the PX7 on the PCI Express Mini Card slot of the carrier board as described in the carrier board s user manual.» Insert the carrier board into the system again.» Power up the system. Figure 4. Installing the PCI Express Mini Card (example only) PCIe Mini Card 30 Card connector 2.3 Installing Driver Software For a detailed description on how to install driver software, please refer to the respective documentation of the software package to be installed. See the MEN website for all available software: 20PX07-00 E Page 13

14 Functional Description 3 Functional Description 3.1 Power Supply The PX7 is supplied via the PCI Express Mini Card connector. 3.2 Wireless Functionality PCI Express Mini Card The PX7 supports: Full-Mini cards according to the PCI Express Mini Card Standard See Figure 1, Board layout top view on page 9 for the position of the PCI Express Mini Card connectors. See Table 1, Pin assignment PCI Express Mini Card (PCIe and USB 2.0) on page 15 for connector pinning and Table 2, Signal mnemonics PCI Express Mini Card on page 16 for signal mnemonics. 20PX07-00 E Page 14

15 Functional Description Onboard Connection Table 1. Pin assignment PCI Express Mini Card (PCIe and USB 2.0) 1 WAKE# V 3 COEX1 4 GND 5 COEX V 7 CLKREQ# 8 UIM_PWR 9 GND 10 UIM_DATA 11 REFCLK- 12 UIM_CLK 13 REFCLK+ 14 UIM_RST 15 GND 16 UIM_VPP Mechanical key 17 UIM_IC_DM 18 GND 19 UIM_IC_DP 20 W_DISABLE1# 21 GND 22 PERST# 23 PERn Vaux 25 PERp0 26 GND 27 GND V 29 GND 30 SMB_CLK 31 PETn0 32 SMB_DATA 33 PETp0 34 GND 35 GND 36 USB_D- 37 GND 38 USB_D Vaux 40 GND Vaux 42 LED_WWAN# 43 GND 44 LED_WLAN# 45 Reserved 46 LED_WPAN# 47 Reserved V 49 Reserved 50 GND 51 W_DISABLE2# Vaux Note: The signals printed in grey are not supported. 20PX07-00 E Page 15

16 Functional Description Signal Mnemonics Table 2. Signal mnemonics PCI Express Mini Card Signal Power GND Ground +3.3Vaux 3.3V source +1.5V 1.5V source User Identity UIM_PWR SIM card power Module Signals (SIM Card) UIM_DATA UIM_CLK UIM_RST SIM card data SIM card clock SIM card reset Function PCI Express REFCLK- PCI Express differential reference clock REFCLK+ PERn0/PERp0 PCI Express receive signals PETn0/PETp0 PCI Express transmit signals Auxiliary Signals CLKREQ# Clock request PERST# Reset for the Mini Card W_DISABLE# Wireless disable WAKE# Wake signal USB 2.0 USB_D- USB line negative USB_D+ USB line positive 20PX07-00 E Page 16

17 Functional Description M.2 Card The PX7 supports: 1x PCI Express Mini Card m.2 Card slot See Figure 1, Board layout top view on page 9 for the position of the m.2 card slot. See Table 3, Pin assignment M.2 Card (USB 2.0 and USB 3.0) on page 18 for connector pinning and Table 4, Signal mnemonics PCI Express M.2 Card connector on page 19 for signal mnemonics. 20PX07-00 E Page 17

18 Functional Description Onboard Connection Table 3. Pin assignment M.2 Card (USB 2.0 and USB 3.0) 75 CONFIG_2 73 GND V 71 GND V 69 CONFIG_ V 67 RST# 1 68 SUSCLK 65 ANTCTL3 66 SIM_DETECT 1 63 ANTCTL2 64 COEX1 61 ANTCTL1 62 COEX2 59 ANTCTL0 60 COEX3 57 GND REFCLK REFCLK GND GPIO_4 45 GND 46 GPIO_ GPIO_ GPIO_1 39 GND 40 GPIO_0 37 SSRX+ 38 DEVSLP 35 SSRX- 36 UIM_PWR 33 GND 34 UIM_DATA 31 SSTX+ 32 UIM_CLK 29 SSTX- 30 UIM_RST 27 GND 28 GPIO_8 25 DPR 1 26 W_DISABLE2# 23 GPIO_11/WoWWAN# 24 GPIO_7 21 CONFIG_0 22 GPIO_6 20 GPIO_5 Mechanical key 11 GND 9 USB_D- 10 GPIO_9 7 USB_D+ 8 W_DISABLE1# 5 GND 6 CARD_PWR_OFF# 3 GND V 1 CONFIG_ V 1) This signal can be made available by a configuration resistor. Note: The signals printed in grey are not supported. 20PX07-00 E Page 18

19 Functional Description Signal Mnemonics Table 4. Signal mnemonics PCI Express M.2 Card connector Signal Function Power GND Ground +3.3V 3.3V source User Identity UIM_PWR SIM card power Module Signals UIM_DATA SIM card data (SIM Card) UIM_CLK SIM card clock UIM_RST SIM card reset Communicationspecific W_DISABLE# Wireless disable signals WoWWAN# Wake-On-WWAN Supplemental communicationspecific signals CARD_PWR_OFF Turn off power RST# Reset GPIO[0:11] General Purpose I/O USB 2.0 USB_D- USB line negative USB_D+ USB line positive USB 3.0 SSTX+ SuperSpeed serial data transmit positive SSTX- SuperSpeed serial data transmit negative SSRX+ SuperSpeed serial data receive positive SSRX- SuperSpeed serial data receive negative Module Configuration Pins CONFIG[0:3] Module configuration SATA Interface signals DEVSLP Device Sleep 20PX07-00 E Page 19