x10data Smart Client 7.0 for Windows Mobile Installation Guide

Transcription

1 x10data Smart Client 7.0 for Windows Mobile Installation Guide Copyright Copyright 2009 Automated Data Capture (ADC) Technologies, Incorporated. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of ADC Technologies Inc. Notwithstanding the foregoing, the licensee of the software with which this document was provided may make a reasonable number of copies of this document solely for internal use. Trademarks Microsoft, Active Directory, ActiveSync, Dexterity, Microsoft Dynamics, SharePoint, Windows, Windows Mobile, and Windows Server, are either registered trademarks or trademarks of Microsoft Corporation or its affiliates in the United States and/or other countries. BarTender is a trademark of Seagull Scientific, Incorporated and is registered in the United States and other countries. x10data and EasyTrac are trademarks of ADC Technologies Incorporated and are registered in the United States and other countries. The names of actual companies and products mentioned herein may be trademarks or registered marks - in the United States and/or other countries - of their respective owners. Unless otherwise noted, the example companies, organizations, products, domain names, addresses, logos, people, places, and events depicted herein are fictitious. No association with any real company, organization, product, domain name, address, logo, person, place, or event is intended or should be inferred. Intellectual property ADC Technologies may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from ADC Technologies, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. Warranty disclaimer ADC Technologies Incorporated disclaims any warranty regarding the sample code contained in this documentation, including the warranties of merchantability and fitness for a particular purpose. Limitation of liability The content of this document is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by ADC Technologies Incorporated. ADC Technologies Incorporated assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Neither ADC Technologies Incorporated nor anyone else who has been involved in the creation, production or delivery of this documentation shall be liable for any indirect, incidental, special, exemplary or consequential damages, including but not limited to any loss of anticipated profit or benefits, resulting from the use of this documentation or sample code. License agreement Use of this product is covered by a license agreement provided with the software product. If you have any questions, please call the ADC Technologies Customer Assistance Department at Publication date: February 2009

2 Contents Section 1 Installing the x10data Smart Client... 3 Requirements... 3 Overview of the x10data Mobile Access Instructions... 3 Step-by-Step walkthrough of the x10data Mobile Access Instructions... 4 Section 2 Upgrading the x10data Smart Client Section 3 Uninstalling the x10data Smart Client Appendix A: Troubleshooting... 20

3 Section 1 Installing the x10data Smart Client Requirements A Windows Mobile (WM) device. Microsoft.NET Compact Framework v2.0 (CF2.0) installed on your WM device. (This can be downloaded and installed from the links shown below.) The x10data Mobile Access Instructions provided by your x10data Administrator. These instructions contain information about the Host website to which you will connect. Overview of the x10data Mobile Access Instructions Note: The following instructions are an example of the x10data Mobile Access Instructions that are ed to you by your x10data Administrator. In the next section, these instructions include step-by-step screenshots to help during the first time setup. Dear [User Name]: As the x10data Administrator for (account), I have provided you access to the following role(s) within our organization: [Role Name 1] [Role Name 2] To access the role(s), please follow these simple steps: (Step-by-step instructions are available at: 1. From your compatible Windows Mobile device, select Start and then select Settings. 2. From the System tab, select About. 3. From the Device ID tab, enter a Device Name including your name (i.e. JSmithTreo) and press OK. 4. Open Internet Explorer and download the appropriate x10data Smart Client at go.x10data.com. If you already have x10data Smart Client installed on your device, skip to Step #5. 5. Select Start and then select Programs to launch the x10data Smart Client.

4 6. Review the Smart Client s Getting Started online help for Connecting to Host Services (refer to Step-bystep instruction link above). 7. From Menu, select File, and then Select Host. 8. Highlight the host Work. 9. From Commands, select Detail, and enter the following bolded Host info: Host Name: Site: Virtual Directory: Auto Logon: User ID: Password: Account: Work [website or IP address] x10mobilesvc [checked] [user id] [password] [account name] 10. From Commands, select Save to save the Host profile. 11. Select ESC or OK to return to the Host Lookup list. 12. Highlight the newly updated Host and press Enter. 13. Once connected to the Host, the title bar in the x10data Smart Client will reflect the name of the host service provider and your current role. 14. Review the Test Plans for each role and you re on your way If you have any questions, please contact me. [x10data Administrator] [Administrator s Organization] Step-by-Step walkthrough of the x10data Mobile Access Instructions 1. From your compatible Windows Mobile device, select Start and then select Settings.

5 2. From the System tab, select About. 3. From the Device ID tab, enter a Device Name including your name (i.e. JSmithMC75) and press OK.

6 4. Open Internet Explorer and download the appropriate x10data Smart Client at go.x10data.com. If you already have x10data Smart Client installed on your device, skip to Step #5.

7 5. Depending on your device, you might not be prompted to OPEN the file after it is saved to a location on your device. If you DO have the option to open the file after it downloads, then select that option and skip the following screenshots until you get to the next step. Otherwise, you will need to use the File Explorer (on the device) to find the downloaded file and open it. The following screenshots from a Windows Mobile 6 device illustrate this process.

8

9 6. Click OK to accept the Software License Agreement. If this is the first time that the Smart Client has been installed, you will also see three additional files installed. These files are for handling the connection to Microsoft s SQLCE database engine: a. sqlce.ppc.wce5.armv4i.cab b. sqlce.dev.enu.ppc.wc5.armv4i.cab c. sqlce.repl.ppc.wc5.armv4i.cab d. x10v7.wmpro.hires.cab

10 7. When the installation has completed, the x10data Smart Client will automatically start. To start the x10data Smart Client from the menu, select Start and then select Programs to launch the x10data Smart Client. 8. After the x10data Smart Client has finished initializing, you will see the Help form for Getting Started. Click the Menu.

11 9. From Menu, select File, and then Select Host. 10. Highlight the host Work. From Commands, select Detail.

12 11. Enter the following bolded Host info: Host Name: Site: Virtual Directory: Auto Logon: User ID: Password: Account: Work x10mobilesvc [checked] [user id] *supplied by your administrator [password] *supplied by your administrator [account name] *supplied by your administrator

13 12. From Commands, select Save to save the Host profile. 13. Select ESC or OK (or click the x in the right-hand corner) to return to the Host Lookup list.

14 14. Highlight the newly updated Host and press Enter (or Commands, Select). 15. Once connected to the Host, the title bar in the x10data Smart Client will reflect the name of the host service provider and your current role.

15 16. Review the Test Plans for each role and you re on your way. To exit the x10data Smart Client, select Menu, File, Exit.

16 Section 2 Upgrading the x10data Smart Client The x10data Smart Client automatically updates itself whenever it detects a new version. Each time that the x10data Smart Client connects with a host, it checks to see if the host and the client are compatible. If an update is available, the host will indicate whether the update is optional, or required. You may always choose to reject an update, but you will not be able to communicate with that host it the update is required.

17 Section 3 Uninstalling the x10data Smart Client To remove x10data Smart Client, do the following: 1. From the Today screen, select Start and then select Settings. 2. Select the System tab, and then select Remove Programs.

18 3. Select x10data Smart Client and select Remove. Choose Yes. 4. Select ok in the upper right-hand corner to close the Settings Remove Programs window. Then select the X in the upper right-hand corner to close the Settings window.

19 5. The x10data Smart Client has been removed.

20 Appendix A: Troubleshooting